ILLUSTRATED PARTS CATALOG

Transcription

1 JDF-2S Silver Series ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice. BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217) F 03/ Bunn-O-Matic Corporation

2 BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. ( BUNN ) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, thermal servers and ThermoFresh servers (mechanical and digital) 1 year parts and 1 year labor. 2) All other equipment - 2 years parts and 1 year labor plus added warranties as specified below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) Compressors on refrigeration equipment - 5 years parts and 1 year labor. c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for 4 years or 40,000 pounds of coffee, whichever comes first. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) or by writing to Post Office Box 3227, Springfield, Illinois ; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EX- PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment. THE BUYER S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages. 392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, Brew- WISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, imix, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage Bar Creator, Beverage Profit Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture Prompted Cleaning, Pouring Profits, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta brewer housing configuration is a trademark of Bunn-O-Matic Corporation

3 TABLE OF CONTENTS Main Frame & Covers... 4 Upper Cabinet & Panels... 6 Refrigeration Components... 10,12,14 Compressor Components... 16,18 Fan Assembly Water Tank Assy... 22,26 Circulation Pump & Lines... 30,32 Product Coil & Lines... 34,36 Dispense Platform Assy Dispense Valve Assy Plain Water Manifold Door Assy - Unlited Door Assy - Lited w/mechanical Switches Door Assy - Lited w/membrane Switches Electrical Components Refillable Container Assy Numerical Index

4 MAIN FRAME & COVERS JDF-2S P

5 ITEM PART NO. QTY. DESCRIPTION MAIN FRAME & COVERS Leg Pad, Non-skid Bracket, Side Screw, Pan Head #8-32 x.38" Panel w/decals, Right (Includes item 4) Screw, Truss Head, Blk #10-32 x.38" Lockwasher, Int.-tooth.438" Decal, Warning - Electrical Panel, Top Screw, Truss Head, Blk #10-32 x.38" Lockwasher, Int.-tooth.438" Panel w/decals, Left (Includes items 7 & 8) Screw, Truss Head, Blk #10-32 x.38" Lockwasher, Int.-tooth.438" Decal, Refrigerant Charge (Early Models) Decal, Refrigerant Charge (Late Models) Decal, Warning - Moving Parts Panel w/decals, Rear (Includes item 10) Screw, Truss Head, Blk #10-32 x.38" Lockwasher, Int.-tooth.438" Decal, Comply To Plumbing Code Bushing Plug Panel, Splash (Also order items 14 & 15) Screw, Pan Head #8-32 x.38" Decal, Dispense/No Dispense Schematic, Electrical Bracket Screw, Pan Head #8-32 x.38" Catch, Magnetic Drip Tray Assy (Includes Strike Plate and item 19) Drip Tray Assy, Extended (Optional Equipment) Grate, Drip Tray

6 UPPER CABINET & PANELS JDF-2S P

7 ITEM PART NO. QTY. DESCRIPTION UPPER CABINET & PANELS Cabinet Assy Screw, Pan Head # Plate, Bottom Closure Screw, Flat Head #8-32 x.38" Bushing, Hinge Wrap (Late Models with bolt on door hinge) Screw, Pan Head # Screw, Pan Head #8-32 x.38" Bracket, Hinge Screw, Truss Head, Blk #10-32 x.38" Washer Catch, Door Latch Screw, Truss Head #6 x.75" Screw, Shoulder Plug Coil, Water Screw, Pan Head # Sensor Assy, Temperature Clip, Adhesive Back Fan Assy Screw, Hex Head # Cover, Fan Screw, Pan Head # Shelf, Product Gasket, Drip Plug Nozzle Nozzle, Quick Stop, White (Optional)(Includes item 18) Nozzle, Quick Stop, Black (Optional)(Includes item 18) O-ring (Also order item 21) * 1 Tube, Silicone.25"ID x 9.0" (Order item 22) (Continued)

8 UPPER CABINET & PANELS JDF-2S (Continued) P

9 ITEM PART NO. QTY. DESCRIPTION UPPER CABINET & PANELS Guard, Fan Guard, Fan (Salt Air Resistant) Screw, Hex Head # Bracket (Late Models with bolt on door hinge) Screw, Pan Head #8-32 x.38" 21 M Lubrifilm 1.0oz (Use when assembling item 18) Tube, Silicone.25"ID x 12.0" (Use as required) Nozzle Kit, Quick Stop, White (Set of 2) Nozzle Kit, Quick Stop, Black (Set of 2)

10 REFRIGERATION COMPONENTS (LATE MODELS w/ CUBIGEL B38G5L COMPRESSOR) JDF-2S A B P NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations

11 REFRIGERATION COMPONENTS (LATE MODELS w/ CUBIGEL B38G5L COMPRESSOR) ITEM PART NO. QTY. DESCRIPTION Air Filter Assy (Includes item 13) Condenser Screw, Crimptite #8 x.38" Tee (Requires brazing to install) Adapter (Requires brazing to install) Tube (Requires brazing to install) Filter Dryer Assy (Requires brazing to install) Accumulator Compressor (See COMPRESSOR COMPONENTS) Nut.25" Fan Assy (See FAN ASSEMBLY) Screw #8-36 x.437" Guard, Wire Form Screw, Crimptite #8 x.38" 11 M Tape, Tube Insulating (Use as required) 12 M Insulation, Tube 25/ "ID x.19" wall x 6.0 Ft (Use as required) Velcro, Loop 3.5" (4 pieces) Velcro, Hook 3.5" (4 pieces) Not Illustrated

12 REFRIGERATION COMPONENTS (LATE MODELS w/ CUBIGEL GD40ME COMPRESSOR) JDF-2S B A P NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations

13 REFRIGERATION COMPONENTS (LATE MODELS w/ CUBIGEL GD40ME COMPRESSOR) ITEM PART NO. QTY. DESCRIPTION Air Filter Assy (Includes item 14) Condenser Screw, Crimptite #8 x.38" Tee (Requires brazing to install) Adapter (Requires brazing to install) Tube (Requires brazing to install) Filter Dryer Assy (Requires brazing to install) Tube (Requires brazing to install) Accumulator Compressor (See COMPRESSOR COMPONENTS) Nut.25" Fan Assy (See FAN ASSEMBLY) Screw #8-36 x.437" Bracket Screw, Pan Head #8-32 x.38" 12 M Tape, Tube Insulating (Use as required) 13 M Insulation, Tube 25/ "ID x.19" wall x 6.0 Ft (Use as required) Velcro, Loop 3.5" (4 pieces) Velcro, Hook 3.5" (4 pieces) Not Illustrated

14 REFRIGERATION COMPONENTS (EARLY MODELS w/ CUBIGEL COMPRESSOR) JDF-2S A B P NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations

15 REFRIGERATION COMPONENTS (EARLY MODELS w/ CUBIGEL COMPRESSOR) ITEM PART NO. QTY. DESCRIPTION Air Filter Assy (Includes item 13) Condenser Screw, Crimptite #8 x.38" Tee (Requires brazing to install) Adapter (Requires brazing to install) Tube (Requires brazing to install) Filter Dryer Assy (Requires brazing to install) Accumulator Compressor (See COMPRESSOR COMPONENTS) Nut.25" Fan Assy (See FAN ASSEMBLY) Screw #8-36 x.437" Bracket Screw, Pan Head #8-32 x.38" 11 M Tape, Tube Insulating (Use as required) 12 M Insulation, Tube 25/ "ID x.19" wall x 6.0 Ft (Use as required) Velcro, Loop 3.5" (4 pieces) Velcro, Hook 3.5" (4 pieces) Not Illustrated

16 REFRIGERATION COMPONENTS (LG COMPRESSOR) JDF-2S A B P4297 NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations

17 REFRIGERATION COMPONENTS (LG COMPRESSOR) ITEM PART NO. QTY. DESCRIPTION Air Filter Assy (Includes item 13) Condenser Condenser (Salt Air Resistant) Screw, Crimptite #8 x.38" Tee (Requires brazing to install) Adapter (Requires brazing to install) Tube (Requires brazing to install) Filter Dryer Assy (Requires brazing to install) Accumulator Compressor (See COMPRESSOR COMPONENTS) Nut.25" Fan Assy (See FAN ASSEMBLY) Screw #8-36 x.437" Bracket Screw, Pan Head #8-32 x.38" 11 M Tape, Tube Insulating (Use as required) 12 M Insulation, Tube 25/ "ID x.19" wall x 6.0 Ft (Use as required) Velcro, Loop 3.5" (4 pieces) Velcro, Hook 3.5" (4 pieces) Not Illustrated * 1 Edging 1.0" (Order item 15) Edging, 12.0" (Use as required)

18 COMPRESSOR COMPONENTS (CUBIGEL B38G5L) JDF-2S P

19 COMPRESSOR COMPONENTS (CUBIGEL B38G5L) ITEM PART NO. QTY. DESCRIPTION Relay, Compressor 120V Overload Protector 120V Cover Clip Capacitor

20 COMPRESSOR COMPONENTS (CUBIGEL GD40ME) JDF-2S P Early Models P

21 COMPRESSOR COMPONENTS (CUBIGEL GD40ME) ITEM PART NO. QTY. DESCRIPTION Relay, Compressor 120V Relay, Compressor 230V Overload Protector 120V Overload Protector 230V Cable Strain Relief Cover Mounting Kit (Includes 4 Grommets and Sleeves) Cover

22 COMPRESSOR COMPONENTS (LG) JDF-2S P

23 ITEM PART NO. QTY. DESCRIPTION COMPRESSOR COMPONENTS (LG) Compressor 120V (Includes items 1-3) Compressor 230V (Includes items 1-3) Grommet Sleeve Terminal Adapter Screw, Truss Head M4 x 7mm

24 FAN ASSEMBLY JDF-2S P

25 ITEM PART NO. QTY. DESCRIPTION FAN ASSEMBLY Fan Assy 120V (Includes items 1-4) Fan Assy 230V (Includes items 1-4) Motor Assy 120V Motor Assy 230V Blade, Fan Silencer Nut.25"

26 WATER TANK ASSY (EARLY MODELS) JDF-2S Early Models A B NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations. 26 P

27 ITEM PART NO. QTY. DESCRIPTION WATER TANK ASSY (EARLY MODELS) Tank Assy Screw, Pan Head # Bracket Nut, Keps # Bracket Nut, Keps # Grommet Probe, Temperature Pump Assy 120V Pump Assy 230V Screw #8-36 x.437" Hose, Flex.38" ID x.625" OD x 20.0" (Early Models) (Order item 30) Hose, Flex.38" ID x.625" OD x 18.0" (Late Models) (Order item 30) Elbow.38" Barb Clamp.57" -.70" Hose, Flex.38" ID x.625" OD x 1.50" (Order item 30) Reducer.50 to.25" Barb * 1 Hose, Flex.38" ID x.625" OD x 3.0" (Order item 32) Plug Clip, Tube Mounting Tee.25" Barb * 1 Tube, Silicone.25" ID x 8.0" (Order item 31) * 1 Tube, Silicone.25" ID x 6.75" (Order item 31) Tee.25" Barb * 1 Tube, Silicone.25" ID x 3.0" (Order item 31) Bracket Screw, Pan Head #8-32 x.38" Evapoator Coil Assy (Includes item 22) Cable Tie Product Coil (Order item 33) Spacer (Continued)

28 WATER TANK ASSY (EARLY MODELS) JDF-2S (Continued) Early Models A B NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations. 28 P

29 ITEM PART NO. QTY. DESCRIPTION WATER TANK ASSY (EARLY MODELS) Manifold, Return Water Elbow Connector.38" Barb 28 M Insulation, Tube 25/50.50" ID x 72.0" (Cut to required length) 29 M Insulation, Tube 25/50.38" ID x 72.0" (Cut to required length) Hose, Flex.38" ID x.625" OD x 12.0" (Cut to required length) Hose, Flex.38" ID x.625" OD x 36.0" (Cut to required length) Hose, Flex.38" ID x.625" OD x 120.0" (Cut to required length) Hose, Silicone.25" ID x.625" OD x 12.0" (Cut to required length) Hose, Silicone.25" ID x.625" OD x 36.0" (Cut to required length) Hose, Silicone.25" ID x.625" OD x 120.0" (Cut to required length) Hose, Silicone.50" ID x.625" OD x 12.0" (Cut to required length) Hose, Silicone.50" ID x.625" OD x 36.0" (Cut to required length) Product Coil Assy (Includes items 23-26)

30 WATER TANK ASSY (LATE MODELS) JDF-2S A B NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations. 30 P

31 ITEM PART NO. QTY. DESCRIPTION WATER TANK ASSY (LATE MODELS) Tank Assy Screw, Pan Head # Bracket Nut, Keps # Bracket Nut, Keps # Grommet Probe, Temperature Pump Assy 120V Pump Assy 230V Screw #8-36 x.437" * 1 Hose, Flex.38" ID x.625" OD x 18.0" (Order item 26) Clamp.57" -.70" Reducer.50 to.25" Barb * 1 Hose, Flex.38" ID x.625" OD x 3.0" (Order item 28) Plug Clip, Tube Mounting * 1 Tube, Silicone.25" ID x 8.0" (Order item 27) * 1 Tube, Silicone.25" ID x 6.25" (Order item 27) Tee.25" Barb * 1 Tube, Silicone.25" ID x 2.6" (Order item 27) Bracket Screw, Pan Head #8-32 x.38" Evapoator Coil Assy (Includes spacers & ties) Product Coil Assy (Includes wire form & ties) Baffle Elbow Connector.38" Barb (Continued)

32 WATER TANK ASSY (LATE MODELS) JDF-2S (Continued) A B P NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations

33 ITEM PART NO. QTY. DESCRIPTION WATER TANK ASSY (LATE MODELS) 23 M Insulation, Tube 25/50.50" ID x 72.0" (Cut to required length) 24 M Insulation, Tube 25/50.38" ID x 72.0" (Cut to required length) 25 M Tape, Tube Insulating (Use as required) Hose, Flex.38" ID x.625" OD x 12.0" (Cut to required length) Hose, Flex.38" ID x.625" OD x 36.0" (Cut to required length) Hose, Flex.38" ID x.625" OD x 120.0" (Cut to required length) Hose, Silicone.25" ID x.625" OD x 12.0" (Cut to required length) Hose, Silicone.25" ID x.625" OD x 36.0" (Cut to required length) Hose, Silicone.25" ID x.625" OD x 120.0" (Cut to required length) Hose, Silicone.50" ID x.625" OD x 12.0" (Cut to required length) Hose, Silicone.50" ID x.625" OD x 36.0" (Cut to required length)

34 CIRCULATION PUMP & LINES (EARLY MODELS) JDF-2S 2 3 Early Models P

35 ITEM PART NO. QTY. DESCRIPTION Coil, Upper Cabinet (See UPPER CABINET & PANELS) * 1 Tube, Silicone.38" ID x 1.5" (Order item 11) Clamp.57" -.70" * 1 Tube, Silicone.38" ID x 17.0" (Order item 11) Pump, Circulation (See WATER TANK ASSEMBLY) Manifold, Return Water (See WATER TANK ASSEMBLY) Clamp, Hose Worm Drive.625/.75" (Early Models) Clamp (Late Models) Elbow CIRCULATION PUMP & LINES (EARLY MODELS) Connector.38" Barb 10 M Insulation, Tube 25/50.38" ID x 72.0" (Cut to required length) Hose, Flex.38" ID x.625" OD x 12.0" (Cut to required length) Hose, Flex.38" ID x.625" OD x 36.0" (Cut to required length) Hose, Flex.38" ID x.625" OD x 120.0" (Cut to required length)

36 CIRCULATION PUMP & LINES (LATE MODELS) JDF-2S P

37 ITEM PART NO. QTY. DESCRIPTION CIRCULATION PUMP & LINES (LATE MODELS) Coil, Upper Cabinet (See UPPER CABINET & PANELS) Clamp.57" -.70" * 1 Tube, Silicone.38" ID x 17.0" (Order item 11) Pump, Circulation (See WATER TANK ASSEMBLY) Clamp, Hose Worm Drive.625/.75" (Early Models) Clamp (Late Models) Elbow Connector.38" Barb Fitting, Bulkhead 9 M Insulation, Tube 25/50.38" ID x 72.0" (Cut to required length) 10 M Tape, Tube Insulating (Use as required) Hose, Flex.38" ID x.625" OD x 12.0" (Cut to required length) Hose, Flex.38" ID x.625" OD x 36.0" (Cut to required length) Hose, Flex.38" ID x.625" OD x 120.0" (Cut to required length)

38 PRODUCT COIL & LINES (EARLY MODELS) JDF-2S C V Models 9 10 P3622 NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations

39 ITEM PART NO. QTY. DESCRIPTION PRODUCT COIL & LINES (EARLY MODELS) Product Coil (See WATER TANK ASSEMBLY) Clamp.57" -.70" (Two additional used on 230V) Hose, Flex.38" ID x 5.75" (120V) Hose, Flex.38" ID x 4.75" (Order item 11)(230V) Valve, Water Inlet 120V See item Valve, Water Inlet 230V Screw, Pan Head M4 x 6mm Fitting, Elbow.38" Fl x.75" Fine Hose (Includes Gasket) Gasket * 1 Hose, Braided.25" ID x 15.75" (Order item 12) Clamp.45" -.55" Coupling, Quick Disconnect, Male * 1 Hose, Flex.38" ID x 1.50" (Order item 11)(230V) Check Valve (230V) Hose, Flex.38" ID x 12.0" (Cut to required length) Hose, Flex.38" ID x 36.0" (Cut to required length) Hose, Flex.38" ID x 120.0" (Cut to required length) Hose, Braided.25" ID x 12.0" (Cut to required length) Hose, Braided.25" ID x 36.0" (Cut to required length) Hose, Braided.25" ID x 120.0" (Cut to required length) 13 M Insulation, Tube 25/50.38" ID x 72.0" (Cut to required length) Kit, Valve Rebuild (Not Illustrated)

40 PRODUCT COIL & LINES (LATE MODELS) JDF-2S C 1 P NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations

41 ITEM PART NO. QTY. DESCRIPTION Product Coil (See WATER TANK ASSEMBLY) Clamp.57" -.70" PRODUCT COIL & LINES (LATE MODELS) * 1 Hose, Flex.38" ID x 8.75" (Order item 11) Valve, Water Inlet 120V (See item 15) Screw, Pan Head M4 x 6mm Fitting, Elbow.38" Fl x.75" Fine Hose (Includes Gasket) Gasket * 1 Hose, Braided.25" ID x 15.75" (Order item 12) Clamp.406" -.504" Coupling, Quick Disconnect, Male * 1 Hose, Flex.38" ID x 1.50" (Order item 11) Fitting, Elbow.38" Barb Hose, Flex.38" ID x 12.0" (Cut to required length) Hose, Flex.38" ID x 36.0" (Cut to required length) Hose, Flex.38" ID x 120.0" (Cut to required length) Hose, Braided.25" ID x 12.0" (Cut to required length) Hose, Braided.25" ID x 36.0" (Cut to required length) Hose, Braided.25" ID x 120.0" (Cut to required length) 13 M Insulation, Tube 25/50.38" ID x 72.0" (Cut to required length) 14 M Tape, Tube Insulating (Use as required) Kit, Valve Rebuild (Not Illustrated)

42 DISPENSE PLATFORM ASSEMBLY JDF-2S C P3623 NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations

43 ITEM PART NO. QTY. DESCRIPTION DISPENSE PLATFORM ASSEMBLY Platform Assy (Includes items 1-19) Platform Thumbscrew Pump Head (Includes items 4 & 5) Rotor Screw, Pan Head #8-32 x 2.45" Tube, Norprene.25" ID x 17.0" lg Clamp.39"/.48" Fitting, Elbow.25" Barb x.38" Barb Clamp.57"/.70" Hose, Flex.38" ID x 4.75" lg (Order item 20) Dispense Valve (See DISPENSE VALVE) Screw, Truss Head #6-32 x 25" Bracket Screw, Truss Head #6-32 x 25" Fitting, Bottle Adapter Screw, Truss Head #6-32 x 25" Plate Screw, Truss Head #6-32 x 25" Manifold, Plain Water (See PLAIN WATER MANIFOLD) Gasket Bushing, Rubber Motor Assy Screw #8-32 x 1.25" The following items are not illustrated Harness, Dispense Platform Hose, Flex.375" ID x 12.0" (Use as required) Hose, Flex.375" ID x 36.0" (Use as required) Hose, Flex.375" ID x 120.0" (Use as required) Pump Tube (Includes items 6,7,8,9 & 10)

44 DISPENSE VALVE ASSEMBLY JDF-2S P

45 ITEM PART NO. QTY. DESCRIPTION DISPENSE VALVE ASSEMBLY Dispense Valve Assy (Includes items 1-19) Body Seal Valve, Solenoid (Includes items 4 & 5) Screw, Truss Head 6-32 x.38" O-ring O-ring Fitting, Elbow O-ring (Also use item 18) Clamp Screw #6-32 x.25" Sleeve O-ring (Also use item 18) Piston Spring, Flow Control Bonnet, Adjuster O-ring (Also use item 18) Adjuster, Position O-ring (Also use item 18) Bracket, Water Adjustment Screw #6-32 x.25" Lube, Silicone (Use when assembling items 7,10,14 & 16)

46 PLAIN WATER MANIFOLD JDF-2S TO PRODUCT COIL P

47 ITEM PART NO. QTY. DESCRIPTION Fitting, Straight O-ring PLAIN WATER MANIFOLD Hose, Braided.25" ID x 3.0" (Order item 8) Clamp " Tee.25" Barb Hose, Braided.25" ID x 5.25" (Order item 8) Coupling, Quick Disconnect, Female Hose, Braided.25" ID x 12.0" (Cut to required length) Hose, Braided.25" ID x 36.0" (Cut to required length) Hose, Braided.25" ID x 120.0" (Cut to required length)

48 DOOR ASSEMBLY - UNLITED JDF-2S P

49 ITEM PART NO. QTY. DESCRIPTION DOOR ASSEMBLY - UNLITED Door, Inner (Includes item 2) Gasket, Door Cover, Door Front Screw, Truss Head, Blk #10-32 x.375" Strip, Adhesive Flavor Label Holder Switch, Dispense Decal, Door Wrap (BUNN Juice) Decal, Door Wrap (BUNN Iced Coffee) Keeper, Door Latch Nut, Acorn Washer The following items are not illustrated Wiring Harness, Switches Decals, Flavor (BUNN Juice) Decals, Flavor (BUNN Iced Coffee)

50 DOOR ASSEMBLY - LITED w/mechanical SWITCHES JDF-2S Dual Ballast Doors Early Models with Flourescent Bulbs P

51 DOOR ASSEMBLY - LITED w/mechanical SWITCHES ITEM PART NO. QTY. DESCRIPTION Door, Inner (Includes item 2) Gasket, Door Keeper, Door Latch Nut, Acorn Washer Panel, Light Screw, Pan Head #8-32 x.75" Lamp Holder (Early Models) Lamp, Flourescent (Early Models) Ballast (Single Ballast Doors) Screw, Hex Crimptite #8 x.38" Cover, Door Front (Juice Display) Cover, Door Front (Iced Coffee Display) Screw, Truss Head, Blk #10-32 x.375" Strip, Adhesive Flavor Label Holder Switch, Dispense Spacer Circuit Board Wiring Harness Wiring Harness LED The following items are not illustrated Wiring Harness, Switches Decals, Flavor (BUNN Juice) Decals, Flavor (BUNN Iced Coffee)

52 DOOR ASSEMBLY - LITED w/membrane SWITCHES JDF-2S Dual Ballast Doors Early Models with Flourescent Bulbs P

53 DOOR ASSEMBLY - LITED w/membrane SWITCHES ITEM PART NO. QTY. DESCRIPTION Door, Inner (Includes item 2) Gasket, Door Keeper, Door Latch Nut, Acorn Washer Panel, Light Screw, Pan Head #8-32 x.75" Lamp Holder (Early Models) Lamp, Flourescent (Early Models) Cover, Door Front (Juice Display) Cover, Door Front (Iced Coffee Display) Screw, Truss Head, Blk #10-32 x.375" Strip, Adhesive Flavor Label Holder Bezel Assy (Portion Control) Bezel Assy (Push Button) Membrane Switch (Portion Control Models) Membrane Switch (Push Button Models) Circuit Board, Portion Control Spacer, Circuit Board Spacer Circuit Board Wiring Harness Wiring Harness LED Bracket Kit (Includes screws) Screw, Hex Hd. #8-32 x.38" The following items are not illustrated Wiring Harness, Door (Early Models w/ Flourescent Bulbs) Wiring Harness, Door (Late Models w/ LED Lights) Wiring Harness, Door (Models w/ LED Lights & Program Switch) Decals, Flavor (BUNN Juice) Decals, Flavor (BUNN Iced Coffee)

54 DOOR ASSEMBLY - LITED 2 SEGMENT DISPLAY JDF-2S Doors with Push Button Controls P

55 DOOR ASSEMBLY - LITED 2 SEGMENT DISPLAY ITEM PART NO. QTY. DESCRIPTION Door, Inner (Includes item 2) Gasket, Door Keeper, Door Latch Nut, Acorn Washer CB, LED Circuit Board Spacer Circuit Board Bracket, Lens Retaining Screw, Hex Washer #6-20 x.50" Lens Door Screw Switch Assy, Portion Control (Includes item Bezel and screws) Switch Assy, Push Button (Includes item Bezel and screws) Key Lock (Includes 2 keys) The following items are not illustrated Wiring Harness, LED to CB Wiring Harness, Door Graphics Kit (Icludes one each of 8 displays)

56 ELECTRICAL COMPONENTS JDF-2S Models with Dual Dispense and/or Program Switch P

57 ELECTRICAL COMPONENTS ITEM PART NO. QTY. DESCRIPTION Switch, Compressor ON/OFF Bushing, Strain Relief Nut, Harness Grounding Switch, Dispense Deck ON/OFF Circuit Board Nut, Keps # Spacer Spacer Transformer 120V (One additional used with Dual Dispense) Transformer 230V Screw, Crimptite #8 x.38" Relay 120V Relay 230V Screw, Crimptite #8 x.38" EMI Filter 230V Screw, Crimptite #8 x.38" Rectifier (Lited Doors w/ Flourescent Bulbs only) Nut, Keps # Transformer 120V (Models w/ Lited Door) Transformer 230V (Models w/ Lited Door) Screw, Crimptite #8 x.38" Resistor 230V Decal, Compressor Switch (Models with Front Mounted Compressor Sw.) Bracket, EMI Filter (Models with Front Mounted Compressor Sw.) Screw, Crimptite #8 x.38" Screw, Pan Head #6-32 x.312" Nut, Keps # Switch, Program Decal, Program (Continued)

58 ELECTRICAL COMPONENTS (Continued) 12 JDF-2S Models with Dual Dispense and/or Program Switch P

59 ITEM PART NO. QTY. DESCRIPTION The following items are not illustrated Power Cord 120V ELECTRICAL COMPONENTS Wiring Harness, Transformer to Circuit Bd. (One additional used with Dual Dispense) Wiring Harness, Transformer to Circuit Board (Lited Doors) Wiring Harness, Main 120V (Models with rear mounted refrigeration switch) Wiring Harness, Main 120V (Models with front mounted refrigeration switch) Wiring Harness, Platform Wiring Harness, Unlited Door Wiring Harness, Unlited Door (Models with Program Sw.) Wiring Harness, Lited Door (Models with Flourescent Bulbs) Wiring Harness, Lited Door (Models with LED Lighting) Wiring Harness, EMI Filter 230V Wiring Harness, Transformer Jumper (Models with Dual Dispense) Wiring Harness, Dispense Disable Switch (Models with Portion Control) Wiring Harness, Dispense Disable Switch (Models with Program Sw.) Wiring Harness, Lited Door (Models with Flourescent Bulbs) Wiring Harness, Lited Door (Models with LED Lighting) (Models w/ Portion Control) Wiring Harness, Lited Door (Models with LED Lighting)(Models w/ Program Sw.)

60 REFILLABLE CONTAINER ASSEMBLY JDF-2S P

61 REFILLABLE CONTAINER ASSEMBLY ITEM PART NO. QTY. DESCRIPTION Container Assy (Includes items 1-3) Lid O-ring

62 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO ,13,15, , , , , ,51,53, ,7,9,13, ,27, ,51,53, ,7,49,51,53, ,13,15, , ,29, , , , ,13,15, ,13,15, ,31,35, ,41, ,41, ,13, ,27, , ,13, ,27, , , , , , ,53, , ,13,15, , , , ,13,15, ,51, , ,51, ,51, , ,15, , , , , ,13,15, , ,13,15, ,13,15, , ,51, , , ,51,53, ,31, , , , , , , , , ,13,15, , , , , , ,55,

63 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO , ,53, , , ,53, , ,33,35, ,41, ,33,35, ,41, ,33,35, ,41, ,31,35, ,41, ,41, ,41, , ,51, , M ,13,15,17,29 M ,35,37,39,41 M ,33 M ,13,15,17 M ,37,41 M