ITCB ITCB-DV Infusion Series

Transcription

1 ITCB ITCB-DV Infusion Series ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice. BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217) To ensure you have the latest revision of the Operating Manual, Illustrated Parts Catalog, Programming Manual, or Service Manual, please visit the Bunn-O-Matic website, at This is absolutely FREE, and the quickest way to obtain the latest catalog and manual updates. For Technical Service, contact Bunn-O-Matic Corporation at F 01/ Bunn-O-Matic Corporation

2 BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. ( BUNN ) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, thermal servers and ThermoFresh servers (mechanical and digital) 1 year parts and 1 year labor. 2) All other equipment - 2 years parts and 1 year labor plus added warranties as specified below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) Compressors on refrigeration equipment - years parts and 1 year labor. c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for 4 years or 40,000 pounds of coffee, whichever comes first. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) or by writing to Post Office Box 3227, Springfield, Illinois ; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EX- PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment. THE BUYER S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages. 392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, Brew- WISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, imix, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage Bar Creator, Beverage Profit Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture Prompted Cleaning, Pouring Profits, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta brewer housing configuration is a trademark of Bunn-O-Matic Corporation

3 TABLE OF CONTENTS Hood, Trunk, Base and Panels...4 Tank and Components...8 Dispense Valve and Sprayhead...10 Faucet and Lines...12 Fill, Dilution & Tank Drain...14 Models w/sweetener...16 Models w/sweetener & Triac...18 Fill, Dilution & Tank Drain - Early Models & CE...20 Electrical and Operating Controls...24 Funnels...28 Numerical Index...30 ITCB-DV... Dual Voltage Machine ITCB-C-DV... Dual Voltage Machine for Canada ITCBA Volt Machine ITCBB Volt Machine Fraction Decimal Fraction Decimal 1/ / / / / / / / / / / / / / /

4 HOOD, TRUNK, BASE AND PANELS ITCB ITCB-DV Early models with 10 hole trunks: The upper, middle, & lower holes will line up with the 6 holes in the current style trunks Bracket no longer used Obsolete P

5 ITEM PART NO. QTY. DESCRIPTION HOOD, TRUNK, BASE AND PANELS Cover, Top (1 Screw) (Includes items 24 & 2) Screw, Truss Head #6-32 x Cover, Top (2 Screws) (Includes items 24 & 2) Screw, Truss Head #6-32 x * 1 Hood, Early Style w/memory Board (Not Available, Order ) Hood, w/o Memory Board (1 Screw) Hood, w/o Memory Board (2 Screws) Hood, Dual Dilution Only (1 Screw) Hood, Dual Dilution Only (2 Screws) Screw, Pan Head #8-32 x Flip Tray w/decal Decal Kit, Dilution Nozzle (Includes Elbow fitting) Kit, Dilution Nozzle (Includes Tee fitting) FOR FACTORY SWEETENER ONLY Screw, Hex #6 x * 1 Trunk w/decals 29.0 (10 mtg. hole) (Not Available, Order ) Trunk w/decals 2.7 (Includes item 9 & 10) (8 mtg. hole) No Switch * 1 Trunk, Flip Tray w/decals 28.8 No Switch (Not Available, order ) Trunk, Flip Tray w/decals 28.8 (Includes items 9, 10, 23, & 26) w/rocker Switch Trunk, Flip Tray & Faucet w/decals 28.8 (Includes items 9, 10, 23, & 26) w/toggle * Trunk, Flip Tray & Side Faucet w/toggle 28.8 (CE Only) (Not Available) Trunk, Side Faucet w/decals 2.7 (Includes items 9, 10, 23, & 26) w/toggle Sw Trunk, Flip Tray w/decals 2.7 (Includes items 9, 10, 23, & 26) w/toggle Sw * 1 Trunk, Flip Tray 2.7 w/toggle Sw (CE Only) (Not Available) Screw, Pan Head #8-32 x Decal, Warning - Decanter/Funnel Decal, Optional Field Wiring (Models ITCB-DV) Decal, Optional Field Wiring (Models ITCB-C-DV) * 1 Panel w/decals 29.0 (10 mtg.hole) (ITCB-DV) (Not Available, Order ) Screw, Truss Head #8-32 x Panel w/decals 29.0 (6 mtg.hole) (Includes items 12-1 & 24) (ITCB-DV) Screw, Truss Head #8-32 x Panel w/decals 2.7 (8 mtg. hole) (Includes items 12-1 & 24) (ITCB-DV) Screw, Truss Head #8-32 x Panel w/decals 2.7 (6 mtg. hole) (Includes items 12-1 & 24) (ITCB-DV) Screw, Truss Head #8-32 x * 1 Panel 2.7 (8 mtg. hole) (ITCB-C-DV) (Not Available, Order ) Screw, Truss Head #8-32 x Panel w/decals 2.7 (6 mtg. hole) (Includes items 12-1 & 24) (ITCB-C-DV) Screw, Truss Head #8-32 x * 1 Panel 2.7 (8 mtg. hole) (ITCBA & ITCBB) (Not Available, Order ) Screw, Truss Head #8-32 x * 1 Panel 2.7 (6 mtg. hole) (ITCBA & ITCBB) (Not Available, Order ) Screw, Truss Head #8-32 x Panel w/decals 29.0 SST (7 mtg. hole) (Includes items 14,1 & 24) Panel w/decals 29.0 BLK (7 mtg. hole) (Includes items 14,1 & 24) Panel w/decals 2.7 SST (7 mtg. hole) (Includes items 14,1 & 24) Screw, Truss Head #8-32 x.2 (continued) * Indicates the part number listed is for reference only

6 HOOD, TRUNK, BASE AND PANELS ITCB ITCB-DV Early models with 10 hole trunks: The upper, middle, & lower holes will line up with the 6 holes in the current style trunks Bracket no longer used Obsolete P

7 ITEM PART NO. QTY. DESCRIPTION Schematic, ITCB-DV (120VAC, 120/240VAC) US & Canada * 1 Schematic, ITCBA, ITCBB (200VAC, 230VAC) Schematic, ITCB-DV w/optional Swtnr Kit (120VAC, 120/240VAC) US & Canada Schematic, ITCB-DV w/factory Sweetener (120VAC, 120/240VAC) US & Canada Schematic, ITCB-DV w/optional Swtnr Kit (w/external Triac) US & Canada Schematic, ITCB-DV w/factory Sweetener & Lo Prod Detect (w/external Triac) Schematic, ITCB-120/208VAC (w/external Triac) US & Canada Schematic, ITCB-DV w/factory Sweetener (w/external Triac) US & Canada Schematic, ITCB-A/B/CE (w/external Triac) Decal, Power Cord Warning Decal, Warning - Electrical Decal, Comply to Plumbing Code * 1 Base, Early Models w/trim (Order New Style Base ) Base, Models w/first Style Inlet Valve Base, Models w/second Style Inlet Valve Base, Models 3rd Style for use with triac bracket Base, Models 3rd Style for use with triac bracket (CE Only) Foot Foot Kit, Set of Rail, Stop Nut, Elastic Lock # Guide Rail, Left Nut, Elastic Lock # Guide Rail, Right Nut, Elastic Lock # Trim, Base Cover Screw, Truss Head, Locking #6-32 x Screw, Hex #6 x Snap Bushing Decal, Warning Overlay Graphic Decal, No Serviceable Parts Shield, Insulator HOOD, TRUNK, BASE AND PANELS Shoulder Screw, 8-32 x Nut, Elastic Lock Bracket, Tank Support Screw, Truss Head #8-32 x Kit, Base Cover Foot Screw, Truss Head #8-32 x Nut, Keps # * Indicates the part number listed is for reference only

8 TANK & COMPONENTS ITCB ITCB-DV P

9 ITEM PART NO. QTY. DESCRIPTION TANK & COMPONENTS Tank (Models ITCB-DV & ITCB-C-DV) Tank (Models ITCBA, 230V & ITCBB, 200V) Nut, Hex # Limit Thermostat Gasket Lid Nut, Hex # Fitting, 90 Silicone Grommet, Liquid Level Probe Grommet, Temp. Sensor Tank Heater 1800W, 120V (Includes item 9) (Models ITCB-DV & ITCB-C-DV) Tank Heater 300W, 230V (Includes item 9) (Models ITCBA, 230V) Tank Heater 300W, 200V (Includes item 9) (Models ITCBB, 200V) Gasket Nut, Hex.0" Tank Heater 1680W, 120V (Includes item 12) (Models ITCB-DV) Tank Heater 142W, 120V (Includes item 12) (Models ITCB-C-DV) Gasket Nut, Hex.0"-20 (4 Used on DV Models) Cap, Tube-Silicone Clamp, Hose-Snap Type.71"-.80" ID Models without Faucet only Probe Kit, Temperature and Dry Plug Probe, Liquid Level Washer Lockwasher, Internal-tooth # Nut, Hex #8-32 The following items are not illustrated Kit, Tank Assembly ITCB-DV 1680/1800W Kit, Tank Assembly ITCBC 142/1800W Kit, Tank Assembly ITCBA (CE) 300W 240V Kit, Tank Assembly ITCBB 300W 200V 9 * Indicates the part number listed is for reference only

10 DISPENSE VALVE & SPRAYHEAD ITCB ITCB-DV 2 REPAIR KIT EARLY MODELS P

11 ITEM PART NO. QTY. DESCRIPTION DISPENSE VALVE & SPRAYHEAD Valve, Dispense (Models ITCB-DV) Valve, Dispense (Models ITCBB, 200V) Valve, Dispense (Models ITCBA, 230V) Nut, KEPS # * 1 Tube.0" ID x 6.0" (Order item 12) * 1 Tube.37" ID x 1.60" (Order item ) Clamp, SNP Fitting, Sprayhead Gasket, Sprayhead Fitting Nut, Hex.438" Sprayhead, 6 Hole Sprayhead, 7 Hole Clamp, SNP-14 (at Tank) Clamp, SNP-12 (at Valve) Dispense Tube Kit, Solenoid to Sprayhead, (Includes clamps) Dispense Tube Kit, Tank to Solenoid, (Includes clamps) Repair Kit, Dispense Valve (Includes Plunger, Spring and Diaphragm) Fitting, 90 Silicone Tube.0" ID x 12.0" Valve, Dispense (120V) Valve, Dispense (200V) Valve, Dispense (240V) Fitting * 1 Tube.0" ID x 7.88" (Order # 1) Gasket, Sprayhead Fitting * Indicates the part number listed is for reference only

12 FAUCET & LINES ITCB ITCB-DV P

13 FAUCET & LINES ITEM PART NO. QTY. DESCRIPTION Faucet Assy (Includes items 2 thru 8) Handle, Red w/warning Bonnet Spring Cup * 1 Body (Order item 1) Pin, Spring Stem Faucet Stem w/pin (Includes items 7 and 8) Washer,.0 ID x.7 OD Nut Clamp, SNP * 1 Tube, Silicone.37 ID X 1.2 LG (Order item 1) * 1 Tube.0 ID x 14.0 (Order item 1) Tube kit, Faucet (Includes items 12-14) 13 * Indicates the part number listed is for reference only

14 FILL, DILUTION & DRAIN ITCB ITCB-DV LATER MODELS w/check VALVE CE ONLY TO TANK TO DILUTION NOZZLE FROM INLET VALVE TO TANK 14 8 & 9 NOTE: LETTER- ING ON FLOW WASHER MUST FACE TOWARDS THE INLET Flow Washer O-ring

15 ITEM PART NO. QTY. DESCRIPTION Bracket, Bulkhead Kit, Replacement Solenoid 120VAC Valve, Solenoid 230VAC Screw, SST Slotted Panhead M4 X 6mm Strainer, Inlet Plug, Hole-Nyl Blk.0hole Dia * 1 Tube, Silicone.37 ID X 16.O LG (29 Trunk) * 1 Tube, Silicone.37 ID X 12.O LG (2.7 Trunk) * 1 Tube, Silicone.2 ID X 28.O LG (29 Trunk) * 1 Tube, Silicone.2 ID X 23.O LG (2.7 Trunk) Elbow,.2 FLR X.7 Hose THD Clamp, Tubing Shut Off Flow Assy, Tnplt.0 Gpm.37 Outlet -.37 Inlet Flow Assy, Tnplt.0 Gpm.2 Outlet -.37 Inlet Clamp, Otiker # Clamp, Hose-Snap SNP Clamp, Hose-Snap SNP Clamp, Hose-Snap SNP Clamp, Hose-Snap SNP * 1 Hose, Flex.37 ID X 3.0 Braid (Order item 31) * 1 Hose, Flex.37 ID X 8.7 Braid (Order item 31) Pad, Mtg 1" Sq-Slfadh Cable Tie (Order item 20) * 1 Tie, Cable-Nyl Blk.6lg.142w (Order item 20) Elbow,1/8-27 Npt To 1/4" Barb (Also included w/dilution nozzle) (Non Sweetener) Tee, 1/8-27 Npt Hex Hd 1/4"Barb (w/sweetener) Tube Kit, Dilution (Includes tubes, clamp, flow control, pad & tie) Tube Kit, Fill (Includes tubes, clamp, flow control) Repair Kit, Flow Control (Includes O-ring & flow washer) Connector, Union.37x * 1 Tube, Silicone.37 ID x 3.0 (Order Item # 30) Check Valve Kit, Check Valve FILL, DILUTION & DRAIN Check Valve (CE Only) The following items are not illustrated Tube, Silicone.2" ID x 3 Feet (Use as required) Tube, Silicone.2" ID x 10 Feet (Use as required) Tube, Silicone.2" ID x 20 Feet (Use as required) Tube, Silicone.37" ID x 1 Foot (Use as required) Tube, Silicone.37" ID x 3 Feet (Use as required) Tube, Silicone.37" ID x 10 Feet (Use as required) Tube, Silicone.37" ID x 20 Feet (Use as required) Hose, Flex.37" ID x 1 Foot (Use as required) Hose, Flex.37" ID x 3 Feet (Use as required) Hose, Flex.37" ID x 10 Feet (Use as required) (Order Item # 30) (Order Item # 29) 1 * Indicates the part number listed is for reference only

16 MODELS w/ SWEETENER ITCB ITCB-DV TO DILUTION NOZZLE

17 ITEM PART NO. QTY. DESCRIPTION Fitting, Bulkhead.20 Flare Lockwasher, Internal Tooth Nut, Hex - Brass Tube Assy, Elbow, Male-Tnpl.2 Barbx Solenoid Valve, 120V (Includes items - 14) Screw, Pan Head #10-32 x Lockwasher, Split # Solenoid Valve Base Solenoid Valve Repair Kit (Includes Plunger, Seal and Spring) Solenoid Valve Coil, 120V Guide Bracket Screw, Truss Head #8-32 x Elbow.2 Flare x.12 MPT Tube Assy. MODELS w/ SWEETENER Tee, Male Br-Tn Pl.2flrx Elbow, Tin Pld.12npt F Switch, Pressure-Low Sweet Tube, Silicone.20 I.D. x 16.0 LG (2.7 Trunk) Tube, Silicone.20 I.D. x 19.0 LG (29 Trunk) (Order Item # 22) Clamp, Hose - SNP Tee, 1/8-27 Npt Hex Hd 1/4"Barb (w/sweetener) Elbow,1/8-27 Npt To 1/4" Barb (Also included w/dilution nozzle) (Non Sweetener) Decal, Water Inlet (Models w/sweetener) Decal, Sweetener Inlet (Models w/sweetener) The following items are not illustrated Tube, Silicone.20 I.D. x.0 O.D. x 36 LG Tube, Silicone.20 I.D. x.0 O.D. x 120 LG Tube, Silicone.20 I.D. x.0 O.D. x 20' LG Tube Assy, Product Empty (Includes 4-17) 17 * Indicates the part number listed is for reference only

18 MODELS w/ SWEETENER & TRIAC ITCB ITCB-DV 6 TO DILUTION NOZZLE TO TANK 9 10 REFER TO PAGE REFER TO ELECTRICAL SECTION

19 ITEM PART NO. QTY. DESCRIPTION Clamp, Shut Off Tee, 1/8-27 Npt Hex Hd 1/4"Barb (w/sweetener) Tube Assembly, Flow Control Tube Assembly, Flow Control Check Valve Clamp, Hose - SNP Clamp, Hose - SNP Clamp, Hose - SNP Clamp, Hose - SNP Tube, Silicone.20 I.D. x 28.0 LG (29 Trunk) (Order #13, Cut as needed) Tube, Silicone.20 I.D. x 19.0 LG (2 Trunk) (Order #13, Cut as needed) Tube, Silicone.20 I.D. x 24.0 LG (ALL) (Order #13, Cut as needed) Tube, Silicone.37 I.D. x 20.0 LG (ALL) (Order #14, Cut as needed) The following items are not illustrated MODELS w/ SWEETENER & TRIAC Tube, Silicone.20 I.D. x.0 O.D. x Tube, Silicone.20 I.D. x.0 O.D. x Tube, Silicone.20 I.D. x.0 O.D. x 20' Tube, Silicone.37 I.D. x Tube, Silicone.37 I.D. x Tube, Silicone.37 I.D. x 20' 19 * Indicates the part number listed is for reference only

20 FILL, DILUTION & TANK DRAIN - EARLY ITCB-DV & ALL ITCBA-CE ITCB ITCB-DV SOLENOID REPAIR PARTS SOL W/1.0" DIA COIL 4 6 SOL W/1.48" DIA COIL To Tank To Tank To Valve 21 VALVE CONVERSION KIT 120V ITCBA-CE 23 P

21 FILL, DILUTION & TANK DRAIN - EARLY ITCB-DV & ALL ITCBA-CE ITEM PART NO. QTY. DESCRIPTION Bracket (See ELECTRICAL & OPERATING CONTROLS) Solenoid Valve, 120V (1.48 Dia Coil) (All DV Models) Solenoid Valve, 120V (1.0 Dia Coil) (All DV Models) Solenoid Valve, 200V (Models ITCBB) Solenoid Valve, 230V (Models ITCBA) Screw, Pan Head #10-32 x Lockwasher, Split #10 Includes items 3 thru Solenoid Valve Coil, 120V Dia (Models ITCB-DV & ITCB-C-DV) Solenoid Valve Coil, 120V Dia (Models ITCB-DV & ITCB-C-DV) Solenoid Valve Coil (Models ITCBB, 200V) Solenoid Valve Coil (Models ITCBA, 230V) Solenoid Valve Repair Kit Dia Coil (Includes Plunger, Seal and Spring) Solenoid Valve Repair Kit Dia Coil (Includes Plunger, Spring and O-ring) Solenoid Valve Base Dia Coil Solenoid Valve Base Kit Dia Coil (Includes O-ring) Sleeve Assy, Solenoid Valve Dia Coil Solenoid Guide/O-Ring Kit Dia Coil (Includes Washer & O-ring) Bracket Screw, Truss Head #8-32 x Elbow.2 Barb x.12 MPT Connector.2 Flare x.12 MPT Tube Strainer/Flow Control (Includes items 14-19) Tube Water Manifold Assembly (Includes items 10-12) Flow Control Outlet Gasket Flow Washer and Gasket (Includes item 1) Body (Order item ) Screen End Cap Valve, Water Inlet 120V (Models ITCB-DV & ITCB-C-DV) Also see # * 1 Valve, Water Inlet 200V (Models ITCBB) No longer available, refer to # Kit, Retrofit Valve, Inlet 230V (Models ITCBA) Kit, Valve Repair (Includes Guide, Spring, Plunger, & Diaphragm) Screw, Truss Head #8-32 x Clamp, SNP-10 (2 Additional used for CE) (Continued) 21 * Indicates the part number listed is for reference only

22 FILL, DILUTION & TANK DRAIN - EARLY ITCB-DV & ALL ITCBA-CE (Continued) ITCB ITCB-DV SOLENOID REPAIR PARTS SOL W/1.0" DIA COIL 4 6 SOL W/1.48" DIA COIL To Tank To Tank To Valve 21 VALVE CONVERSION KIT 120V ITCBA-CE 23 P

23 FILL, DILUTION & TANK DRAIN - EARLY ITCB-DV & ALL ITCBA-CE ITEM PART NO. QTY. DESCRIPTION Tube, Silicone.37 ID x 20.0 (ITCB-DV with 2.7 Trunk) Tube, Silicone.37 ID x 23. (ITCB-DV with 29.0 Trunk) Tube, Silicone.37 ID x 19.0 (ITCBA CE with 2.7 Trunk) Tube, Silicone.37 ID x 20.0 (ITCBA CE with 29.0 Trunk) (Order item 33) Clamp Bracket Screw, Pan Head #8-32 x Fitting, Bulkhead.2 Flare Lockwasher, Internal-Tooth Nut, Hex - Brass Tube, Silicone.2 x 23.0 (Models with 2.7 Trunk) Tube, Silicone.2 x 26.0 (Models with 29.0 Trunk) (Order item 32) Clamp, SNP Elbow,1/8-27 Npt To 1/4 Barb Tube, Silicone.37 ID x 3.0 (All ITCBA CE) (Order item 33) Check Valve, SST.37 Barb Kit, Solenoid Conversion 120V (Includes Valve, Bracket, Hardware & Instructions) Valve Assembly Kit 200V (Includes Valve, Bracket, Hardware & Instructions) The following items are not illustrated Tube, Silicone.2 ID x 12.0 (Use as required) Tube, Silicone.2 ID x 36.0 (Use as required) Tube, Silicone.2 ID x (Use as required) Tube, Silicone.2 ID x 20'.0 (Use as required) Tube, Silicone.37 ID x 12.0 (Use as required) Tube, Silicone.37 ID x 36.0 (Use as required) Tube, Silicone.37 ID x (Use as required) Tube, Silicone.37 ID x 20'.0 (Use as required) 23 * Indicates the part number listed is for reference only

24 ELECTRICAL & OPERATING CONTROLS ITCB ITCB-DV SECOND STYLE FIRST STYLE ITCBA, 230V & ITCBB, 200V P

25 ITEM PART NO. QTY. DESCRIPTION Membrane Switch ELECTRICAL & OPERATING CONTROLS Bezel Kit (Includes Membrane Switch & Decal) Bezel Kit (Includes Membrane Switch, Decal, Gasket, & Sensing Coil-Assembled) Screw, Pan Head #8-32 x.38" Gasket Mount, Board (2 Used on Early Models) Control Board w/sweetener (RoHS) Early Models w/relay Control Board (CE Only) (RoHS) Early Models w/relay Control Board (RoHS) (Late Models w/external Triacs) Replacement CBA Only Control Board (RoHS) (Late Models w/external Triacs) CE Only Nut, Keps # Retrofit Kit CBA (Includes CBA, bracket, triac, heatsink & instructions) Retrofit Kit CBA (Includes CBA, bracket, triac, heatsink & instructions) CE ONLY Spacer Memory Circuit Board (RoHS) Nut, Keps #8-32 (Early models Only) Spacer Transformer (Models ITCB-DV & ITCB-C-DV) Transformer (Models ITCBB, 200V) Transformer (Models ITCBA, 230V) Nut, Keps # Plug, Bezel Decal, Top Terminal Block (Models ITCB-DV & ITCB-C-DV) Terminal Block (Models ITCBB, 200V) Terminal Block (Models ITCBA, 230V) Screw, Truss Head #8-32 x.0" Screw, Grounding #10-32 x.38" (Early models) Screw, Grounding #8-32 x.0" (Late models) Switch, Toggle (Dual Voltage Brewers only) Bracket w/decals (Incls items 13 & 16-20) (Models ITCB-DV & ITCB-C-DV) Bracket w/decals (Incls items 13 & 17-20) (Models ITCBA, 230V & ITCBB, 200V) Bracket w/decals (Incls items 13 & 16-20) (Models ITCB-DV Second Style) Screw, Pan Head #8-32 x.38" Decal, Voltage Selection (ICB-DV models only) Decal, Individual Circuit Info * 1 Decal, Use Copper Wire Only (NOT AVAILABLE) * 1 Decal, Supply Connection (NOT AVAILABLE) Decal, Ground Connector, Cable (Steel Clamp) Bushing, Strainrelief (Plastic) Hole Plug (Continued) 2 * Indicates the part number listed is for reference only

26 ELECTRICAL & OPERATING CONTROLS ITCB ITCB-DV (Continued) SECOND STYLE FIRST STYLE ITCBA, 230V & ITCBB, 200V P

27 ITEM PART NO. QTY. DESCRIPTION ELECTRICAL & OPERATING CONTROLS EMI Filter (Models ITCBA, 230V) (Threaded studs) EMI Filter (Models ITCBA, 230V) (Quick connects) Bracket (for only) Screw, Truss Head #6-32 x Terminal Lug (Models ITCBA, 230V & ITCBB, 200V) Screw, Pan Head #8-32 x Switch, Rocker 12/20V 0A Double Pole Screw, Truss Head, Locking #6-32 x Cover Plate (Models w/out Switch) Screw, Truss Head, Locking #6-32 x Decal, Equipotentiality (CE Only) Switch, Toggle DPST Facenut Bracket, Switch Indicator/Guard Bracket, Switch I/O (CE Only) Fastener, Snap in (CE Only) Sensing Coil Fastener Spacer Standoff Triac Screw, 6-32 x Lockwasher M Heat Sink Compound, oz Tube Heatsink Screws, 6-32 x Bracket w/decals (Dual Dilution) (Models w/off Board Triac) Bracket w/decals (Single Valve) (Models w/off Board Triac) Bracket w/decals (CE Models w/off Board Triac) Screw, Pan Head #8-32 x.37 The following items are not illustrated Wiring Harness, Liquid Level Probe Wiring Harness, Liquid Level Probe with Sweetener Pressure Switch Power Cord (120V 1A) Power Cord (20V 20A IRAM) Wiring Harness, Sensing Coil Wiring Harness, Memory Board (Early Models) Wiring Harness, Main (DV Models only) NO LONGER AVAILABLE Wiing Harness, Main (Models ITCBA, 230V & ITCBB, 200V) Wiring Harness, Main (DV Models only) w/rocker Switch NO LONGER AVAILABLE Wiring Harness, Main (DV Models only) w/external Triacs Wiring Harness, Main (200/230V Models only) w/external Triacs Decal, Cord Warning Wiring Harness, EMI Filter to Terminal block (Models ITCBA, 230V & ITCBB, 200V) Wiring Harness, EMI Filter to On/Off (CE Models w/external Triacs) * 1 Wiring Harness, Rocker Sw to Term Blk (13 ) NO LONGER AVAILABLE * 1 Wiring Harness, Rocker Sw to Term Blk (18 ) NO LONGER AVAILABLE Wiring Harness, Toggle Switch to Term Blk (13 ) Wiring Harness, Toggle Switch to Term Blk (6 ) Wiring Harness, w/factory installed Sweetener Solenoid to Dilution Solenoid-CBA 27 * Indicates the part number listed is for reference only

28 FUNNELS ITCB ITCB-DV STANDARD BREW - TEA DUAL DILUTION STANDARD BREW - TEA COFFEE 2 3 DUAL DILUTION QUICK BREW - TEA QUICK BREW - TEA P

29 ITEM PART NO. QTY. DESCRIPTION FUNNELS Funnel Assembly, Coffee-Black (Includes #2-6) Splashguard Funnel, Coffee-Black (Not Available. Order #1) Decal, Caution - REMOVE FUNNEL Decal, Caution - HOT LIQUID Decal, COFFEE Funnel Assembly, Quick Brew - Smoke (Includes #2,4,,9,10,) Adapter W/Screen, Funnel (See 21) Funnel, Quick Brew - Smoke (Not Available. Order #7) Decal, QUICK BREW Funnel Tip,.4" Dia Quick Brew (See also #21) Funnel Assembly, Standard Brew - Smoke (Includes #2,4,,8,13,14) Funnel, Standard Brew - Smoke (Not Available. Order #12) Funnel Tip,.082" Dia Standard Brew (See also #21) Funnel Assembly, DD Quick Brew (Includes #2,4,,8,10,,16-18) Funnel, DD Quick Brew - Smoke (Not Available. Order 1) Decal, WARNING ROTATE FUNNEL Decal, (ARROW) Funnel Tip Locator Funnel Assembly, Dual Dilution Standard Brew (Includes #2,4,,8,14,17,18,20) Funnel, DD Standard Brew - Smoke (Not Available. Order 19) The following items are not illustrated Funnel Tip & Screen Kit Standard Brew (Includes 8 & 14) Funnel Tip & Screen Kit Quick Brew (Includes 8 & ) 29 * Indicates the part number listed is for reference only

30 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO , , , , , , , , , , , , ,21, , , ,23,2, , ,19, ,17,19, ,17,19, ,17,19, ,17,19, ,1,19, ,1, , ,, , , , ,19, ,

31 , , ,17, , M