LCA-2 LCA-2A LCA-2 PC LCC-2

Transcription

1 LCA-2 LCA-2A LCA-2 PC LCC-2 POWER READY PORTION RINSE REFILL STOP! HOT WATER! WARNING HOT LIQUIDS! AVERTISSEMENT LIQUIDES CHAUDS ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice. BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217) A 04/ Bunn-O-Matic Corporation

2 BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. ( BUNN ) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal servers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor. 2) All other equipment - 2 years parts and 1 year labor plus added warranties as specified below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) Compressors on refrigeration equipment - 5 years parts and 1 year labor. c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for 4 years or 40,000 pounds of coffee, whichever comes first. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) or by writing to Post Office Box 3227, Springfield, Illinois ; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EX- PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment. THE BUYER S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages. 392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, Brew- WISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, imix, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, Velocity Brew, Air Brew, Beverage Bar Creator, Beverage Profit Calculator, Brew better, not bitter., BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Element, Nothing Brews Like a BUNN, Pouring Profits, Signature Series, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta brewer housing configuration is a trademark of Bunn-O-Matic Corporation

3 TABLE OF CONTENTS TITLE PAGE NO. Housing & Panels...4 Door Assembly (Early Models)...8 Door Assembly (Late Models)...12 Cabinet & Chiller (Early Models)...14 Vented Cabinet (Late Models)...18 Tank Assembly...20 Dispense Valves & Lines...24 Pump Assembly...28 Electrical Controls...30 Numerical Index

4 HOUSING & PANELS LCC-2 LCA FUNCTION MODE RINSE - NORMAL - PRIME RUN - OFF - NIGHT ! WARNING HOT LIQUIDS! AVERTISSEMENT LIQUIDES CHAUDS P2585 4

5 ITEM PART NO. QTY. DESCRIPTION HOUSING & PANELS * 1 Housing Assy BLK Single Piece (Not serviced. Order Decals separately) * 1 Housing Assy BLK Multi Piece (Not serviced. Order Decals separately) Screw, Truss Head, Sltd. Blk #8-32 x.25" (Used to join panels & base) Decal, Comply to Plumbing Code Decal, Warning - Electrical Leg 4.0" adj Washer, Flat Pad, Anti-Skid * 1 Hinge, Lower Door Screw, Truss Head, Sltd. Blk #8-32 x.38" Hinge, Upper Door.25" Pin length (Early model doors w/bushing) Hinge, Upper Door.375" Pin length (Late model doors w/o Bushing) Screw, Truss Head, Sltd. Blk #8-32 x.38" * 1 Hose, Silicone.25" ID x 35.0" (Order item 35) Clamp.47/.54" ID Elbow.25" x.38" Barb Grommet Brace Screw, Truss Head, Sltd. Blk #10-32 x.38" (to Housing) Screw, Truss Head, Sltd. SST #8-32 x.38" (to Cabinet) Bracket Screw, Truss Head, Sltd. Blk #8-32 x.38" Screw, Truss Head, Sltd. Blk #6-32 x.38" Bracket Screw, Truss Head, Sltd. Blk #8-32 x.38" Decal, Dispense Platform Bracket (Early Models) Splash Panel w/decal (Includes item 18) Screw, Truss Head, Sltd. Blk #8-32 x.38" Decal, Warning - Hot Liquids Cover, Drip Tray (See item 34) Drip Tray (See item 34) Cup Tray Decal, Cup Tray Warning Lock, Door (Includes Keys) Key Set (Continued) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 5

6 HOUSING & PANELS LCC-2 LCA-2 (Continued) FUNCTION MODE RINSE - NORMAL - PRIME RUN - OFF - NIGHT ! WARNING HOT LIQUIDS! AVERTISSEMENT LIQUIDES CHAUDS P2585 6

7 ITEM PART NO. QTY. DESCRIPTION HOUSING & PANELS Panel w/decals, Lower Access (Includes items 25, 26 & 31) Screw, Truss Head, Sltd. Blk #8-32 x.38" Decal, Terminal Block Wiring * 1 Decal, Terminal Block Wiring (Models w/master ON/OFF Switch) Schematic, Electrical (LCC-2, LCA-2) Schematic, Electrical (LCC-2A, LCA-2A) Schematic, Electrical (LCC-2, LCA-2)(Models w/master ON/OFF Switch) Schematic, Electrical (LCA-2)(Models with Vented Cabinet) Brace Screw, Truss Head, Sltd. Blk #8-32 x.25" Panel w/decal, Upper Access (Includes item 31) Screw, Truss Head, Sltd. Blk #8-32 x.38" Cover, Top/Front (Models LCC-2 only) Cover, Top/Front (Models LCA-2 only) Models without Vented Cabinet Cover, Top/Front (Models with Vented Cabinet) Screw, Truss Head, Sltd. Blk #10-32 x.38" Screw, Truss Head, Sltd. Blk #8-32 x.38" Cover w/decal, Top/Rear (Includes item 31) Screw, Truss Head, Sltd. Blk #8-32 x.38" Decal, No Serviceable Parts Decal, Optional Field Wiring Plate, Cover (Not used on models w/master ON/OFF Switch) Screw, Truss Head, Locking BLK #6-32 x.25" Drip Tray Kit (Includes items 19 & 20) Hose, Silicone.25" ID x 12.0" (Use as required) Hose, Silicone.25" ID x 36.0" (Use as required) Hose, Silicone.25" ID x 120.0" (Use as required) Not Illustrated * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 7

8 DOOR ASSEMBLY (Early Models) LCC-2 LCA POWER READY PORTION RINSE REFILL STOP! HOT WATER Models LCA-2 and LCC-2 only P2586 8

9 ITEM PART NO. QTY. DESCRIPTION DOOR ASSEMBLY (Early Models) Door Assembly, Standard Controls (Includes items 6,7,10,13 & 14-26) Door Assembly, Portion Control (Includes items 6,7,10,13,14,18, & 30-33) Plate w/decal (Includes item 2) Screw, Round Head Sltd. #8-32 x 1.25" Decal, Maintenance Keeper, Door Latch Screw, Truss Head Sltd. #6-32 x.38" Seal, Product Cabinet Insulation, Door Frame, Door (Not Serviced) Bracket Screw, Truss Head Sltd. #8-32 x.25" Bushing, Lower Hinge Lower Door Hinge (See HOUSINGS & PANELS) Shoulder Screw # Panel Screw, Pan Head # Bushing, Strain Relief Circuit Board, LED Screw, Pan Head # Switch, Membrane Button Kit (Includes two buttons) Stem, Handle Models LCA-2 & LCC-2 with Standard Controls Spring Cover, Switch Pin, Faucet Handle Handle, Black Handle, Orange Includes item 19 Models LCA-2 & LCC-2 with Standard Controls Bushing, Upper Hinge (Early models only) Door Front Screw, Pan Head # Decal, Upper Door Wrap Decal, Flavor Gard Decal, LED Display (Continued) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 9

10 DOOR ASSEMBLY (Early Models) LCC-2 LCA-2 (Continued) POWER READY PORTION RINSE REFILL STOP! HOT WATER Models LCA-2 and LCC-2 only P

11 ITEM PART NO. QTY. DESCRIPTION Decal, Left Faux Server Decal, Right Faux Server Bracket, Switch Screw, Truss Head Sltd. #8-32 x.25" Bracket, Latch * 1 Button Membrane Switch DOOR ASSEMBLY (Early Models) Bezel Washer, Wavy Models LCA-2, PC with Portion Controls Snap Ring * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 11

12 DOOR ASSEMBLY (Late Models) LCC-2 LCA POWER READY PORTION RINSE REFILL STOP! HOT WATER Models LCA-2 and LCC-2 only P

13 DOOR ASSEMBLY (Late Models) ITEM PART NO. QTY. DESCRIPTION Door Assembly, Standard Controls (Includes items 6,7,10 & 12-24) Door Assembly, Portion Control (Includes items 6,7,10,12,14,17, 20-29) Plate w/decal (Includes item 2) Screw, Round Head Sltd. #8-32 x 1.25" Decal, Maintenance Keeper, Door Latch Screw, Truss Head Sltd. #6-32 x.38" Seal, Product Cabinet Insulation, Door * 1 Frame, Door (Not Serviced) Bracket Screw, Truss Head Sltd. #8-32 x.25" Bushing, Lower Hinge Lower Door Hinge (See HOUSINGS & PANELS) Shoulder Screw # Panel Screw, Truss Head Sltd. #8-32 x.25" Circuit Board, LED Screw, Pan Head # Switch, Membrane Button Kit (Includes two buttons) Stem, Handle Spring Cover, Switch Pin, Faucet Handle Handle, Black Handle, Orange Door Front (Not serviced separately) Screw, Pan Head # Decal, Upper Door Wrap Decal, Flavor Gard Decal, LED Display Decal, Left Faux Server Decal, Right Faux Server * 1 Button Membrane Switch Bezel Washer, Wavy Snap Ring Includes item 19 Models LCA-2 & LCC-2 with Standard Controls Models LCA-2 & LCC-2 with Standard Controls Models LCA-2, PC with Portion Controls * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 13

14 CABINET & CHILLER (EARLY MODELS) LCC-2 LCA P

15 ITEM PART NO. QTY. DESCRIPTION CABINET & CHILLER (EARLY MODELS) Cabinet Assy (Model LCA-2)(Includes items 1, 9, 10 & Brace ) * 1 Cabinet (Models LCC-2 only) Cabinet (Models LCA-2 only) Insulation, Cabinet Side Insulation, Cabinet Back Insulation, Cabinet Top Insulation, Cabinet Bottom Fan Assy, Lower Screw, Truss Head Sltd. #8-32 x.50" Nut # Fan Guard * 2 Cover, Vent Screw, Truss Head Sltd. Locking #6-32 x.25" Catch, Door Latch (10 lb. pull) Screw, Truss Head #4-40 x.38" Lockwasher, Int.-tooth # Plate, Latch Grommet Cover, Top/Front (See HOUSING & PANELS) Insulation, Chiller * 1 Insulation, Chiller Top Bracket Screw, Truss Head Sltd. Blk #8-32 x.25" Grommet Clip, Cord Sensor Assy Thermoelectrics Assy Screw, Truss Head Sltd. #10-32 x.25" Probe, Temperature Bracket Screw, Truss Head Sltd. Blk #8-32 x.25" * 1 Panel, Merchandiser Decal, Merchandiser Panel (Continued) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 15

16 CABINET & CHILLER (EARLY MODELS) LCC-2 LCA-2 (Continued) P

17 ITEM PART NO. QTY. DESCRIPTION CABINET & CHILLER (EARLY MODELS) Fan Assy, Upper Screw, Truss Head Sltd. #8-32 x 1.5" * 1 Housing Screw, Truss Head Sltd. Blk #8-32 x.25" * 1 Cover Screw, Truss Head Sltd. Blk #6-32 x.25" * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 17

18 VENTED CABINET LCC-2 LCA P

19 ITEM PART NO. QTY. DESCRIPTION VENTED CABINET Cover (See HOUSINGS & PANELS) Guard, Cabinet Fan Screw Round Head 8-32 x 1.5" Spacer Fan Assembly Cabinet, Vented Screw, Truss Head BLK 8-32 x.38" Keeper, Cabinet Latch Screw, Pan Head 4-40 x.50" Grommet Wiring Harness, Cabinet Fan (Not Illustrated) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 19

20 TANK ASSEMBLY LCC-2 LCA Early Models 27 Early Models P

21 ITEM PART NO. QTY. DESCRIPTION Tank TANK ASSEMBLY Insulation, Tank Wrap (Early Models. Not Available) Gasket, Tank Lid Lid, Tank Nut # Grommet, Thermostat (Models with thermostat) Grommet (Models without thermostat) Grommet, Level Probe Probe, Liquid Level Washer Lockwasher, Int.-tooth # Nut # Gasket, Overflow Tube * 1 Tube, Overflow Nut # Limit Thermostat, Double Nut, Keps # Probe, Temperature Grommet, Temperature Probe Bracket Screw, Truss Head Sltd. Blk #8-32 x.38" Tank Heater, 5500W 240V (Includes item 15) Tank Heater, 4000W 240V (Includes item 15) Tank Heater, 3000W 240V (Includes item 15) Nut # Gasket, Tank Heater Switch, Overflow (Includes items 17 & 18) Retaining Ring Gasket, Silicone Overflow Cup Nut, Keps #8-32 Early Models Nut, Brass.125" * 1 Tube, Silicone.375" ID x 21.0" (Order item 41) Elbow.375" Barb x.375" NPT Valve, Water Inlet Screw, Truss Head Sltd. #10-32 x.25" (Continued) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 21

22 TANK ASSEMBLY LCC-2 LCA-2 (Continued) Early Models 27 Early Models P

23 ITEM PART NO. QTY. DESCRIPTION TANK ASSEMBLY Elbow.38" NPT x.63" flare * 1 Tube, Silicone.375" ID x 7.5" (Order item 41)(Early models) * 1 Tube, Silicone.375" ID x 9.0" (Order item 41)(Late models) Clamp.62/.71" ID (2 used on early models) * 1 Tube, Silicone.375" ID x 19.0" (Order item 41) Clip, Shut-off Clamp.59/.66" ID (3 less used on early models) Plug, Hose * 1 Tube, Silicone.375" ID x 1.5" (Order item 41) Fitting, Tee.375" Barb Late models only Overflow Cup, Aluminum Washer Nut, Hex # Grommet Tube Late models only Film, Insulating Tie, Cable Fitting.375FPT x.500mpt Check Valve Late models only Fitting, Close Nipple.375NPT Tube, Silicone.375" ID x 12.0" (Use as required) Tube, Silicone.375" ID x 30.0" (Use as required) Not Illustrated * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 23

24 DISPENSE VALVES & LINES LCC-2 LCA Early Models Connector Kits P

25 ITEM PART NO. QTY. DESCRIPTION DISPENSE VALVES & LINES Bracket Nut, Keps # Valve, Dispense (Includes item 3)(Refer to item 41) O-ring Warmer Tube Assy (Includes Warmer Tape w/leads) * 1 Tube, Silicone.375" ID x 5.0" (Order item 36) Connector, Barb.375" * 1 Tube, Silicone.313" ID x 16.0" (Order item 37) Flow Restrictor (Optional for 1.8 oz/sec. flow rate) * 4 Pin Mixing Chamber Assy (Includes items 8, 9, 11 & 12) Screw, Truss Head Sltd. #8-32 x.38" * 2 Lid * 2 Snap Cap Hose Assy.187" ID (Incl. items 14-16) Hose Assy.187" ID x 14.0" Feed End (Incl. items 14-16) Hose Assy.125" ID (Incl. items 14-16) Also order item * 4 Hose.187" ID x 9.0" * 2 Hose.187" ID x 14.0" * 4 Hose.125" ID x 9.0" Order item Elbow (.187" ID Hose Assy) Elbow (.125" ID Hose Assy) Clamp.40/.45" ID (.187" ID Hose Assy) Clamp.31/.34" ID (.125" ID Hose Assy) * 2 Tube, Norprene.125" I.D. x 6.0" (Order item 39) Clip Connector.187" Connector.25" Adapter Kit (Includes items 21-25) Connector * 2 Hose, Silicone.25" I.D. x 1.75" (Order item 40) Coupling, Reducing Clamp.47/.54" I.D Clamp.53/.59" I.D Adapter Kit (Includes items 22,23,24 & 27) (Continued) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 25

26 DISPENSE VALVES & LINES (Continued) LCC-2 LCA Early Models Connector Kits P

27 ITEM PART NO. QTY. DESCRIPTION Connector DISPENSE VALVES & LINES Grommet, Valve Mounting (Late models only) Items 29 through 41 are Not Illustrated Adapter Kit (Incl. items 13,16, 19 & 38)(Uses.125" I.D. Hose & Clamps) Adapter Kit (Incl. items 13,16, 19 & 38)(Uses.188" I.D. Hose & Clamps) Adapter Kit (Incl. items 13,16, 21 & 38)(Uses.125" I.D. Hose & Clamps) Adapter Kit (Incl. items 13,16, 21 & 38)(Uses.188" I.D. Hose & Clamps) Adapter Kit (Incl.items 13,16, 27 & 38)(Uses.125" I.D. Hose & Clamps) Adapter Kit (Incl. items 13,16, 27 & 38)(Uses.188" I.D. Hose & Clamps) Adapter Kit, 14.0" Feed End (Incl. items 13,16, 19 & 38)(Uses.188" I.D. Hose & Clamps) Tube, Silicone.375" ID x 12.0" (Use as required) Tube, Silicone.375" ID x 36.0" (Use as required) Tube, Silicone.313" ID x 12.0" (Use as required) Tube, Silicone.313" ID x 36.0" (Use as required) Tube, Silicone.313" ID x 60.0" (Use as required) 38 M Lube Compound.30 oz Tube, Norprene.125" I.D. x 10.0" (Use as required) Tube, Silicone.25" ID x 12.0" (Use as required) Tube, Silicone.25" ID x 36.0" (Use as required) Tube, Silicone.25" ID x 120.0" (Use as required) Repair Kit, Dispense Valve (Includes items for 1 Valve) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 27

28 PUMP ASSEMBLY LCC-2 LCA P

29 ITEM PART NO. QTY. DESCRIPTION PUMP ASSEMBLY * 1 Bracket, Left Screw, Truss Head Sltd. Blk #8-32 x.25" * 1 Bracket, Right Screw, Truss Head Sltd. Blk #8-32 x.25" Motor Magnet Hub Lockwasher, Ext.-tooth # Screw, Round Head Sltd. Locking #10-32 x.50" RPM Sensor Screw, Truss Head Sltd. #4-40 x.38" Bushing, Rubber Insulation Bracket, Pump Mounting Screw, Truss Head Sltd. #8-32 x.50" Block Screw, Pan Head Sltd. #6-32 x.312" Bearing Insert, Threaded # Shoulder Bolt # Rotor Ring, Retaining E-ring Cover Thumb Screw #10-32 x.625" Nut, Flanged # Standoff Screw, Truss Head Sltd. Locking #8-32 x.25" Compression Band Assy Fastener, Snap in Cable Tie (Not Illustrated) Pump Assy (Includes items 4-23) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 29

30 ELECTRICAL CONTROLS LCC-2 LCA Replace with listed class G fuse rated at 10 amps. 28 CE Models P

31 ITEM PART NO. QTY. DESCRIPTION Cable Connector ELECTRICAL CONTROLS Screw, Grounding #10-32 x.50" Bracket Screw, Truss Head Sltd. #8-32 x.25" Power Supply Screw, M4 x 6mm Bracket Screw, Truss Head Sltd. Blk #8-32 x.25" Screw, Truss Head Sltd. SST #8-32 x.25" Heat Sink Screw, Truss Head Serr. #6-32 x.38" Triac, 40A Lockwasher, Split # Screw, Pan Head Sltd. #6-32 x.312" 8 M Heat Sink Compound Terminal Block, 3-Pole Terminal Block, 2-Pole (230V CE models) Screw, Truss Head Sltd. #8-32 x.50" Thermostat (Includes items 11, 12 & 13)(Early Models) Screw, Pan Head Phillips #6-32 x.312" Grommet, Thermostat (Early Models) Knob (Early Models) Bracket (Early Models) Screw, Truss Head Sltd. Blk #8-32 x.25" Cap, Rocker Switch Switch, Selector Switch, Door Open Circuit Board, Control Screw, Truss Head #6-32 x 1.00" Spacer Bracket Bracket (230V CE models only) Screw, Truss Head Sltd. #8-32 x.25" Membrane Switch Fuse Holder (230V CE models only) Screw, Pan Head Sltd. #6-32 x.312" Fuse, 10A (230V CE models only) (Continued) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 31

32 ELECTRICAL CONTROLS (Continued) LCC-2 LCA Replace with listed class G fuse rated at 10 amps. 28 CE Models P

33 ITEM PART NO. QTY. DESCRIPTION ELECTRICAL CONTROLS Cable, Ribbon Screw, Pan Head Sltd. Locking #4-40 x.312" Switch, Dispense Volume Memory Decal, Fuse Rating (230V CE models only) Terminal Lug (230V CE models) Screw, Pan Head Brass #10-32 x.50" Lockwasher, Ext.-tooth # Decal, Ground 120V Decal, Ground 230V CE Models Strain Relief, Cord (230V CE models) Washer, Reducing Cable Tie, Power Cord Retainer Shield. Terminal Block Switch, Master ON/OFF (Late Models) Screw, truss Head, Locking BLK #6-32 x.25" Screw, Pan Head #10-32 x.38" Lockwasher #10 Terminals The following items are not illustrated Power Cord (LCC-2 & LCA-2 Models only) Power Cord (LCC-2C & LCA-2C Models only) Harness, Main Wiring (Early models) Harness, Main Wiring (Late models) Harness, Main Wiring (230V CE Models))(Early models) Harness, Main Wiring (230V CE Models))(Late models) Harness, Switches/Power (Early models) Harness, Switches/Power (Late models) Harness, Portion Control Wiring (Early models) Harness, Motors Wiring Harness, T-block to Tank Heater & Limit Harness, Probe Wiring (Early models) Harness, Upper Fan Wiring Harness, Tube Warmer Wiring (Early models) Lead, Thermostat Blk 30.0" (Early models) Wire, Double Limit Jumper (230V CE Models) Jumper (Models with Portion Control) Harness, Door Wiring (Late models) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 33

34 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO , , , , ,11,13, ,7,15,17,29, ,7,19, ,29, , ,9, , , , , ,15,21, , , , , , , , , , , , , , ,

35 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO , , , , , , , , , , , , , , , M M