TITAN DUAL ILLUSTRATED PARTS CATALOG

Transcription

1 TITAN DUAL ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice. BUNN-O-MATIC CORPORATION POST OFFICE BOX 7 SPRINGFIELD, ILLINOIS PHONE: (17) FAX: (17) G /17 0 Bunn-O-Matic Corporation

2 BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. ( BUNN ) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, thermal servers and ThermoFresh servers (mechanical and digital) 1 year parts and 1 year labor. ) All other equipment - years parts and 1 year labor plus added warranties as specified below: a) Electronic circuit and/or control boards - parts and labor for years. b) Compressors on refrigeration equipment - years parts and 1 year labor. c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for years or 0,000 pounds of coffee, whichever comes first. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (17) or by writing to Post Office Box 7, Springfield, Illinois ; ) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and ) receiving prior authorization from BUNN that the defective equipment is under warranty. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EX- PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or ) shall replace the equipment or refund the purchase price for the equipment. THE BUYER S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages. 9, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, Brew- WISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, imix, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage Bar Creator, Beverage Profit Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture Prompted Cleaning, Pouring Profits, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta brewer housing configuration is a trademark of Bunn-O-Matic Corporation

3 TABLE OF CONTENTS Base - Trunk - Hood - Covers & Panels... Electrical Controls Faucet Funnel... Numerical Index... Sprayhead Valve, Water By-Pass Valve and Sprayhead... 1 Tank and Mounting Brackets... 8 Tank Heater & Overflow Protection Devices... 6 Water Inlet Valve & Lines

4 BASE - TRUNK - HOOD - COVERS & PANELS TITAN DUAL /0 V Models P

5 ITEM PART NO. QTY. DESCRIPTION Cover Assy, Top BLK (Includes item & ) Screw, Truss Head BLK #8 - x.8" Decal, "No Serviceable Parts" Shield, Insulator Schematic, Phase/1 Phase (/08 & /0V models) Schematic, Phase/1 Phase (0/00V models) Hood SST (Includes item 6) Screw, Pan Head #8 - x.7" Switch, Membrane Panel W/Decals, Trunk Rear (Includes items 8 & 9) Decal, Warning - Electrical Decal, Comply to Plumbing Code Panel W/Decal, Trunk Side (Includes item 11) (1 less used on 0/00V models) Panel W/Decal, Trunk Right Side (Includes item 11) (0/00V models) Decal, Main Power Switch Panel, Access EMI Filter (0/00V models only) (Includes items and 1) Screw, Pin in Torx Head #8 - x.7" Panel W/Decals, Trunk SST (Includes items 1 & 1) (/08V models) Panel W/Decals, Trunk SST (Includes items 1 & 1) (/0V models) Panel W/Decals, Trunk SST (Includes items 1 & 1) (0/00V models) Screw, Truss Head #8 - x.7" Decal, Caution - Decanter/Funnel Decal, Optional Field Wiring (/08V models) Decal, Optional Field Wiring (/0V models) Decal, Optional Field Wiring (0/00V models) Panel W/Decal, Trunk SST (Includes item ) Screw, Truss Head #8 - x.7" Bracket, Server Stop Screw, Truss Head #8 - x.7" * 1 Base Plate Screw, Pan Head #8 - x.7" Leg, Nickel Plated Pad, Anti Skid BASE - TRUNK - HOOD - COVERS & PANELS Decal, "Warning Hazardous Voltage" * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

6 TANK HEATER & OVERFLOW PROTECTION DEVICES TITAN DUAL Brewers W/Copper Overflow Cup 18 P

7 TANK HEATER & OVERFLOW PROTECTION DEVICES ITEM PART NO. QTY. DESCRIPTION Gasket, Tank Heater Tank Heater, 08V (Includes item 1) 1.00 Tank Heater, 0V (Includes item 1) Nut, Hex # Thermostat, Limit Nut, Hex # Grommet.7" I.D Probe Kit (Includes items 6, 7 & 8) Washer.16" I.D. x.7" O.D Lockwasher, Internal Tooth # Nut, Hex # Tube Assy, Vent 0.00* 1 U-Channel.0" (Order item ) Bracket, Overflow Cup Mounting Switch Assy, Liquid Level (Includes items 1, 1 & 1) Nut, Hex.1" FPT Washer,.0" I.D. x 1.07" O.D Gasket, Float Switch * Washer, Adjusting (DO NOT USE IN THIS APPLICATION) Clip, Spring Overflow Cup Assy Copper (Second type) (Also replaces aluminum cup) Kit, Overflow Cup (Aluminum) (Includes items,19, 1 & ) Nut, Keps # Clamp, Hose.7"/." I.D * 1 Tube, Silicone.1" I.D. x.0" (Order item ) Washer, Celcon.0 I.D. x 1.0 O.D Nut, Hex.1 FPT Elbow,.7 Multi Barb Film, Insulating Tube.7" O.D U-Channel 18.0" (Use as required) Tube, Silicone.1" I.D. x 6.0" Tube, Silicone.1" I.D. x 60.0" Tube, Silicone.1" I.D. x.0" Not illustrated 7 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

8 TANK AND MOUNTING BRACKETS TITAN DUAL P

9 ITEM PART NO. QTY. DESCRIPTION TANK AND MOUNTING BRACKETS Bracket, Tank Support (Top) Screw, Truss Head LKG #8 - x.7" Nut, Hex # Lid, Tank Nut, Hex # Gasket, Tank Tank Bracket, Tank Mounting (Bottom) Nut, Keps # * 1 Tube, Silicone.0" I.D. x.7" O.D. x 6.0" (Order item 11) Clamp, Hose.6"/.71" I.D Clamp, Tubing Shutoff Plug,.0" I.D. Hose Bushing, 1.188" Dia Tube, Silicone.0" I.D. x 6.0" (Not illustrated) 9 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

10 WATER INLET VALVE & LINES TITAN DUAL /08 & /0 Volt Models Early Models Torque to in. lbs /00 Volt Models P

11 ITEM PART NO. QTY. DESCRIPTION Bracket, Solenoid Mounting Screw, Pan Head #8 - x.7" Fitting,.7" Male Flare x.0" MPT (One additional used on Early 0/00V models) Fitting, Compression.8" Tube x.0" MPT (Late 0/00V models) Gasket,.7" Flare Copper Tube Assembly, Solenoid to Tank.8" O.D Cap (For shipping purposes only) Union.7" Male Flare Tube Assembly, Bulkhead to Supply Connector.7" Flare x.1" MPT Bulkhead Fitting.7" Flare Solenoid Valve Assy, V (Includes items 9 & 11) Solenoid Valve Assy, 0V (Includes items 9 & 11) Screw, Truss Head #8 - x.7" Elbow, Male.7" Flare x.1" MPT Lockwasher, Internal Tooth.6" I.D Nut, Hex.6" Tube Assy, Bulkhead to Solenoid Valve (/08V & /0V models) Tube Assy, Bulkhead to Check Valve (Late models) Check Valve Fitting, 90 Flare.0: MPT Tube Assy, Check Valve to Arrester (Includes Flare Nut) Mini Rester WATER INLET VALVE & LINES Tube Assy, Arrester to Solenoid Valve (Includes Flare Nut) Nut/Sleeve, Compression.8" Tube M Sealant, Pipe 6 ml (Not illustrated) 0/00V models only 11 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

12 SPRAYHEAD VALVE, WATER BY-PASS VALVE & SPRAYHEAD TITAN DUAL P

13 SPRAYHEAD VALVE, WATER BY-PASS VALVE & SPRAYHEAD ITEM PART NO. QTY. DESCRIPTION Fitting, Bypass Restrictor * Tube, Silicone.0" I.D. x.7" O.D. x 1." (Order item 6) Clamp, Hose.6"/.71" I.D * Tube, Silicone.7" I.D. x 1.0" O.D. x.0" (Order item 7) Clamp, Hose.9"/1." I.D Tee,.7" Barb * 1 Tube, Silicone.0" I.D. x.7" O.D. x 7.0" (Order item 6) Clamp, Hose.71"/.80" I.D * Tube, Silicone.7" I.D. x 1.0" O.D. x." (Order item 7) Tube Assy, Vent Grommet.7" I.D Elbow,.7" Barb Valve Assy, Bypass V (Includes items 1 thru 19) Valve Assy, Bypass 0V (Includes items 1 thru 19) Nut, Keps # Coil Assy, Bypass Valve (Not available order item 1) Bracket, Mounting (Not available order item 1) Spring (Not available order item 8) Plunger (Not available order item 8) Diaphragm Body (Not available order item 1) Valve Assy, Sprayhead V (Includes items 1 thru 1) Valve Assy, Sprayhead 0V (Includes items 1 thru 1) Coil Assy, Valve V Screw, #8 - x 1.0" Spacer, Sprayhead Valve Spring Plunger Diaphragm O-Ring, 1.0" OD x 1.7" ID x.06" Body (Not available order item 0) O-Ring Fitting, Sprayhead Valve (continued) 1 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

14 SPRAYHEAD VALVE, WATER BY-PASS VALVE & SPRAYHEAD TITAN DUAL P

15 SPRAYHEAD VALVE, WATER BY-PASS VALVE & SPRAYHEAD ITEM PART NO. QTY. DESCRIPTION C-Ring, Dispense Valve Nut, Fitting Retaining (Not available order item 0) Nut, Hex.7" Seal, Sprayhead (included in item 0) Sprayhead Back (included in item 0) Sprayhead, 1 Hole (included in item 0) NOTE: The following parts are not illustrated Tube, Silicone.0" I.D. x.7" O.D. x 1.0" Tube, Silicone.0" I.D. x.7" O.D. x 6.0" Tube, Silicone.7" I.D. x 1.0" O.D. x 1.0" Solenoid Valve Repair Kit, Bypass (Includes one each of spring, plunger and diaphragm) Solenoid Valve Repair Kit, Sprayhead (Includes items,,, 6, 8, 9 and 0) Sprayhead Assy (Includes one each of items, and ) 1 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

16 FAUCET TITAN DUAL P

17 ITEM PART NO. QTY. DESCRIPTION Faucet Assy (Includes items thru 8) Handle, Faucet Bonnet, Faucet Spring, Faucet Seat Cup, Faucet * 1 Body, Faucet (Not available order item 1) Stem, Faucet FAUCET Pin, Spring.1" Dia. x.0" Faucet Stem W/Pin (Includes items 7 & 8) Clamp, Hose.9"/.66" I.D Tube, Silicone.81" I.D. x..0" LG Nut, Faucet Retaining Washer, Intl Tooth.0" Lock Plate, Faucet Mounting Screw, Truss Head #8- x.7" Plug, Hole 1." Dia Faucet Kit (Includes items,,,8 & 9) Tube, Silicone.1" I.D. x.6" O.D. x 60.0" (Not Illustrated) 17 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

18 BLK RED BLU WHI BLK BLU RED WHI ELECTRICAL CONTROLS 1 TITAN DUAL TO MACHINE L1 L L N FROM POWER SOURCE FOR -PHASE OPERATION CONNECT INPUT WIRING TO L1,L,L & N AS SHOWN. TERMINAL BLOCK TO MACHINE L1 L L N FROM POWER SOURCE FOR SINGLE PHASE OPERATION MOVE BLU WIRE INTO TERMINAL BLOCK WITH BLACK WIRE, CONNECT INPUT WIRING TO L1 & N AS SHOWN /00V Models P

19 ITEM PART NO. QTY. DESCRIPTION Circuit Board, Main control Nut, Keps # Spacer Mount, Circuit Board Transformer, VA to 1V Transformer, VA 0 to 1V Nut, Keps # Contactor, -pole V Contactor, -pole 08/0V Screw, Truss Head #- x.7" Bracket, Contactor Mounting Screw, Pan Head #8- x.8" Ring, Solenoid Washer, Nylon." ID x.68" OD Spring, Solenoid ELECTRICAL CONTROLS Coil, Solenoid, V (Includes items 7 thru 9) Coil, Solenoid, 0V (Includes items 7 thru 9) Screw, Truss Head #8- x." Lockwasher, Split #8 Also see item Guide, Pin Bracket, Solenoid Nut, Keps # Switch, Main Power Screw, Truss Head #6- x." (Switch Mounting) Screw, Pan Head #- x.7" Lockwasher, External Tooth # Terminals Terminal Block, Pole BLACK/RED/BLUE (/08V, /0V & 00V models) Screw, Truss Head #8- x.0" Decal, Terminal Block (L1-L-L-N) (1 additional used on 0/00V models) Terminal Block, Pole (One additional used on 0/00V models) Screw, FilisterHead #8 - x 1." ( additional used on 0/00V models) Ground Screw W/Terminal Washer #- x.0" Connector, Cable Bracket W/Decals, Terminal Block Mtg (/08 & /0V models) Bracket W/Decals, Terminal Block Mtg (0/00V models) Screw, Truss Head #8- x.0" Washer, Flat.19" ID x 1.0" OD Includes items 0 & Decal, Field Wiring (/08 & /0V models Decal, Field Wiring (0/00V models) Decal, Ground (Continued) 19 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

20 BLK RED BLU WHI BLK BLU RED WHI ELECTRICAL CONTROLS 1 TITAN DUAL TO MACHINE L1 L L N FROM POWER SOURCE FOR -PHASE OPERATION CONNECT INPUT WIRING TO L1,L,L & N AS SHOWN. TERMINAL BLOCK TO MACHINE L1 L L N FROM POWER SOURCE FOR SINGLE PHASE OPERATION MOVE BLU WIRE INTO TERMINAL BLOCK WITH BLACK WIRE, CONNECT INPUT WIRING TO L1 & N AS SHOWN /00V Models P

21 ITEM PART NO. QTY. DESCRIPTION ELECTRICAL CONTROLS Grommet, Temperature Sensor Probe Kit, Temperature/Dry Plug EMI Filter, European 6 amp Phase Screw, Truss Head # - x.8" Guard, EMI Filter NOTE: The following items are not illustrated Wiring Harness, Heater Return (/08 & /0V models) Wiring Harness, Heater Return (0/00V models) Wiring Harness, Contactor-Out Wiring Harness, Main Wiring Harness, Liquid Level Wiring Harness, Main Power Sw. to Terminal Blocks (/08 &/0V models) Wiring Harness, Main Power Sw. to EMI Filter Wiring Harness, Terminal Block to Main Power Sw. 0/00V models Wiring Harness, EMI Filter to Terminal Block Wiring Harness, Terminal Block to Main Power Sw Wiring Harness, EMI Filter to Terminal Block 00V models Wiring Harness, Terminal Block/Contactor Capacitor Assy, EMI Filter Solenoid Assy, Funnel Lock V (Includes items 7 thru 1) 1 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

22 FUNNEL TITAN DUAL P

23 FUNNEL ITEM PART NO. QTY. DESCRIPTION Funnel Assy, SST (Each includes Items thru 9) Funnel W/Decals (Includes items & ) Decal, Caution-Remove Funnel Decal, Caution-Hot Liquid Handle, Funnel-Black (Includes item 6) Screw, Round Head.BLK " - 0 x 1." Filter Basket w/splash Guard T-Ring, Funnel Basket (Refer to item 1) Insert, Funnel Tip - Male (Refer to item 11) Insert, Funnel Tip - Female (Refer to item 11) Funnel Tip Kit (Includes items 9 & ) T-Ring Kit (Includes of item 8) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

24 , , , ,11, , , , , NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO , , M