ITCB ITCB-DV Infusion Series

Transcription

1 ITCB ITCB-DV Infusion Series ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifi cations, and dimensions for equipment or replacement parts are subject to change without notice. BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217) E 04/ Bunn-O-Matic Corporation

2 BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. ( BUNN ) warrants equipment manufactured by it as follows: 1) All equipment other than as specifi ed below: 2 years parts and 1 year labor. 2) Electronic circuit and/or control boards: parts and labor for 3 years. 3) Compressors on refrigeration equipment: 5 years parts and 1 year labor. 4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes fi rst. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) or by writing to Post Office Box 3227, Springfi eld, Illinois ; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment. THE BUYER S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages. ITCB-DV... Dual Voltage Machine ITCB-C-DV... Dual Voltage Machine for Canada ITCBA Volt Machine ITCBB Volt Machine 2

3 TABLE OF CONTENTS Dispense Valve and Sprayhead...10 Electrical and Operating Controls...18 Faucet and Lines...12 Funnels...22 Hood, Trunk, Base and Panels...4 Numerical Index...24 Tank and Components...8 Water Inlet & Tank Drain...14 B.U.N.N., BREWWISE, BUNN, BUNN FAMILY GOURMET, BUNN GOURMET ICE, BUNN-O-MATIC, BUNN OMATIC LOGO, BUNN, BUNNSERVE, DBC, DR. BREW LOGO, DR. BREW, DUAL, EASY CLEAR, EASY POUR, FLAVORGARD, GOURMET ICE, GOURMET JUICE, HIGH INTENSITY, INFUSION SERIES, LEGENDARY FOR QUALITY, MY CAFE, POWERLOGIC, SAFETY-FRESH, SINGLE, SMART FUNNEL, SMART HOPPER, SOFT HEAT, SPLASHGARD, SYSTEM III, THE MARK OF QUALITY IN BEVERAGE EQUIPMENT WORLDWIDE and THERMOFRESH are registered trademarks of Bunn-O-Matic Corporation in the United States and/or other countries. AXIOM, BREWLOGIC, BREWWIZARD, BUNN ESPRESS, BUNNLINK, BUNNLINK LOGO, COFFEE SPOT, EASYGARD, GLOBAL SOLUTIONS FOR QUALITY BEVERAGES, IMIX, NOTHING BREWS LIKE A BUNN, QUALITY BEVERAGE EQUIPMENT WORLDWIDE, SIGNATURE SERIES, SILVER SERIES, SMART WAVE, BUNNSOURCE, DIGITAL BREWER CONTROL, POURING PROFITS, SMART HEAT, THE HORIZONTAL RED LINE, ULTRA, COFFEE AT ITS BEST and TEA AT ITS BEST are trademarks of Bunn-O-Matic Corporation in the United States and/or other countries. Unauthorized use or duplication of these marks is strictly prohibited by law. The absence of a name or logo in this list does not constitute a waiver of any and all intellectual property rights that Bunn-O-Matic Corporation has established in any of its product, feature, or service names or logos. Fraction Decimal Fraction Decimal 1/ / / / / / / / / / / / / / /

4 HOUSING, TRUNK, BASE AND PANELS ITCB ITCB-DV Early models with 10 hole trunks: The upper, middle, & lower holes will line up with the 6 holes in the current style trunks. Obsolete Obsolete P

5 ITEM PART NO. QTY. DESCRIPTION HOUSING, TRUNK, BASE AND PANELS Cover, Top (Includes items 24 & 25) Screw, Truss Head #6-32 x.25" * 1 Hood, Early Style w/memory Board (Order New Style) Hood, w/o Memory Board Screw, Pan Head #8-32 x.38" Gasket Bezel Bezel Kit (Includes Membrane Switch & Decal) Screw, Pan Head #8-32 x.38" Flip Tray w/decal Decal Kit, Dilution Nozzle (Includes Screws) Screw, Hex #6 x.38" * 1 Trunk w/decals 29.0" (10 mtg. hole) (Obsolete. Order ) Trunk w/decals 25.75" (Includes item 9 & 10) (8 mtg. hole) Trunk w/decals 29.0" (Includes items 9 & 10) (6 mtg. hole) Trunk w/decals 25.75" (Includes item 9 & 10) (6 mtg. hole) Trunk w/decals 29.0" (Includes items 9 & 10) (6 mtg. hole) w/on/off Switch Trunk w/decals 25.75" (Includes item 9 & 10) (6 mtg. hole) w/on/off Switch Trunk, Flip Tray w/decals 29.0" (Includes items 9, 10, 23, & 26) Trunk, Flip Tray w/decals 25.75" (Includes items 9, 10, 23, & 26) Screw, Pan Head #8-32 x.38" Decal, Warning - Decanter/Funnel Decal, Optional Field Wiring (Models ITCB-DV) Decal, Optional Field Wiring (Models ITCB-C-DV) * 1 Panel w/decals 29.0" (10 mtg.hole) (ITCB-DV) (Obsolete. Order ) Screw, Truss Head #8-32 x.25" Panel w/decals 29.0" (6 mtg.hole) (Includes items & 24) (ITCB-DV) Screw, Truss Head #8-32 x.25" Panel w/decals 25.75" (8 mtg. hole) (Includes items & 24) (ITCB-DV) Screw, Truss Head #8-32 x.25" Panel w/decals 25.75" (6 mtg. hole) (Includes items & 24) (ITCB-DV) Screw, Truss Head #8-32 x.25" Panel w/decals 25.75" (8 mtg. hole) (Includes items & 24) (ITCB-C-DV) Screw, Truss Head #8-32 x.25" Panel w/decals 25.75" (6 mtg. hole) (Includes items & 24) (ITCB-C-DV) Screw, Truss Head #8-32 x.25" Panel w/decals 25.75" (8 mtg. hole) (Includes items 14,15 & 24) (ITCBA & ITCBB) Screw, Truss Head #8-32 x.25" Panel w/decals 25.75" (6 mtg. hole) (Includes items 14,15 & 24) (ITCBA & ITCBB) Screw, Truss Head #8-32 x.25" Schematic, ITCB-DV (120VAC, 120/240VAC) ^ 1 Schematic, ITCBA, ITCBB (200VAC, 230VAC) Schematic, ITCB-C-DV (Canada) (continued)

6 HOUSING, TRUNK, BASE AND PANELS ITCB ITCB-DV Early models with 10 hole trunks: The upper, middle, & lower holes will line up with the 6 holes in the current style trunks. Obsolete Obsolete P

7 ITEM PART NO. QTY. DESCRIPTION Decal, Power Cord Warning Decal, Warning - Electrical Decal, Comply to Plumbing Code * 1 Base, Early Models w/trim (Order New Style Base ) Base Foot Foot Kit, Set of Rail, Stop Nut, Keps # Guide Rail, Left Nut, Keps # Guide Rail, Right Nut, Keps # Trim, Base Cover Screw, Truss Head, Locking #6-32 x.25" Screw, Hex #6 x.38" Snap Bushing HOUSING, TRUNK, BASE AND PANELS Decal, Warning Overlay Graphic Decal, No Serviceable Parts Shield, Insulator (Adhesive Back) Shoulder Screw, 8-32 x Nut, Elastic Lock

8 TANK & COMPONENTS ITCB ITCB-DV P2888 8

9 ITEM PART NO. QTY. DESCRIPTION TANK & COMPONENTS Tank Assy (Includes items 1-13) (Models ITCB-DV) Tank Assy (Includes items 1-13) (Models ITCB-C-DV) Tank Assy (Includes items 1-10) (Models ITCBA, 230V) * 1 Tank Assy (Includes items 1-10) (Models ITCBB, 200V) Tank (Models ITCB-DV & ITCB-C-DV) Tank (Models ITCBA, 230V & ITCBB, 200V) Nut, Hex # Limit Thermostat Gasket Lid Nut, Hex # Fitting, 90 Silicone Grommet, Liquid Level Probe Grommet, Temp. Sensor Tank Heater 1800W (Includes item 9) (Models ITCB-DV & ITCB-C-DV) Tank Heater 3500W, 230V (Includes item 9) (Models ITCBA, 230V) Tank Heater 3500W, 200V (Includes item 9) (Models ITCBB, 200V) Gasket Nut, Hex.50" Tank Heater 1680W (Includes item 12) (Models ITCB-DV) Tank Heater 1420W (Includes item 12) (Models ITCB-C-DV) Gasket Nut, Hex.50"-20 (4 Used on DV Models) Cap, Tube-Silicone Clamp, Hose-Snap Type.71"-.80" ID Models without Faucet only Probe Kit, Temperature and Dry Plug Probe, Liquid Level Washer Lockwasher, Internal-tooth # Nut, Hex #

10 DISPENSE VALVE & SPRAYHEAD ITCB ITCB-DV P

11 ITEM PART NO. QTY. DESCRIPTION DISPENSE VALVE & SPRAYHEAD Valve, Dispense (Models ITCB-DV) Valve, Dispense (Models ITCBB, 200V) Valve, Dispense (Models ITCBA, 230V) Nut, KEPS # * 1 Tube.50" ID x 6.50" (Order item 12) * 1 Tube.375" ID x 1.60" (Order item 11) Clamp, Hose-Snap Type.59"-.66" ID Fitting, Sprayhead Gasket, Sprayhead Fitting Nut, Hex.438" Sprayhead, 6 Hole Sprayhead, 7 Hole Clamp, Hose-Snap Type.71"-.80" ID (at Tank) Clamp, Hose-Snap Type.59"-.66" ID (at Valve) Tube.375" ID x 12.0" (Use as required) Tube.375" ID x 36.0" (Use as required) Tube.375" ID x 120.0" (Use as required) Tube.50" ID x 12.0" (Use as required) Repair Kit, Dispense Valve (Includes Plunger, Spring and Diaphragm)

12 FAUCET & LINES ITCB ITCB-DV P

13 ITEM PART NO. QTY. DESCRIPTION FAUCET & LINES Faucet Assy (Includes items 2 thru 8) Handle, Red w/warning Bonnet Spring Cup Body (Order item 1) Pin, Spring Stem Faucet Stem w/pin (Includes items 7 and 8) Washer,.50" ID x.75" OD Nut Clamp, Hose-Snap Type.59"-.66" ID * 1 Tube.25" ID x 8.0" (Order item 17) Clamp, Hose-Snap Type.71"-.80" ID * 1 Tube.50" ID x 6.5" (Order item 18) Reducer.50" x.375" Tube.375" ID x 12.0" (Use as required) Tube.375" ID x 36.0" (Use as required) Tube.375" ID x 120.0" (Use as required) Tube.50" ID x 12.0 (Use as required)

14 WATER INLET & TANK DRAIN ITCB ITCB-DV SOLENOID REPAIR PARTS SOLENOIDS W/1.0" DIA COIL SOLENOIDS W/1.48" DIA COIL To TANK gpm FLOW BUNN 90 psig max operating pressure Strainer/Flow Control # (Repl. Flow Washer # ) (Repl. Screen # ) gpm FLOW BUNN 90 psig max operating pressure Strainer/Flow Control # (Repl. Flow Washer # ) (Repl. Screen # ) 22 1 P

15 ITEM PART NO. QTY. DESCRIPTION WATER INLET & TANK DRAIN Bracket (See ELECTRICAL & OPERATING CONTROLS) Solenoid Valve, 120V (1.48" Dia Coil) (Models ITCB-DV & ITCB-C-DV) Solenoid Valve, 120V (1.0" Dia Coil) (Models ITCB-DV & ITCB-C-DV) Solenoid Valve, 200V (Models ITCBB) Solenoid Valve, 230V (Models ITCBA) Screw, Pan Head #10-32 x.375" Lockwasher, Split #10 Includes items 3 thru Solenoid Valve Coil, 120V " Dia (Models ITCB-DV & ITCB-C-DV) Solenoid Valve Coil, 120V - 1.0" Dia (Models ITCB-DV & ITCB-C-DV) Solenoid Valve Coil (Models ITCBB, 200V) Solenoid Valve Coil (Models ITCBA, 230V) Solenoid Valve Repair Kit " Dia Coil (Includes Plunger, Seal and Spring) Solenoid Valve Repair Kit - 1.0" Dia Coil (Includes Plunger, Spring and O-ring) Solenoid Valve Base " Dia Coil Solenoid Valve Base Kit - 1.0" Dia Coil (Includes O-ring) Sleeve Assy, Solenoid Valve " Dia Coil Solenoid Guide/O-Ring Kit - 1.0" Dia Coil (Includes Washer & O-ring) Bracket Screw, Truss Head #8-32 x.38" Elbow.25" Barb x.125" MPT Connector.25" Flare x.125" MPT Tube Strainer/Flow Control (Includes items 12-17) Flow Control Outlet Gasket Flow Washer and Gasket (Includes item 13) Body (Order item 11) Screen End Cap Tube Valve, Water Inlet 120V (Models ITCB-DV & ITCB-C-DV) Valve, Water Inlet 200V (Models ITCBB) Valve, Water Inlet 230V (Models ITCBA) Kit, Valve Repair (Includes Guide, Spring, Plunger, & Diaphragm) Screw, Truss Head #8-32 x Clamp, Hose-Snap Type.59"-.66" ID ^ 1 Tube, Silicone.375" ID x 20.0" (Order item 33) (Models with 25.75" Trunk) ^ 1 Tube, Silicone.375" ID x 23.5" (Order item 33) (Models with 29.0" Trunk) (Continued)

16 SOLENOID REPAIR PARTS 3 4 WATER INLET & TANK DRAIN (Continued) ITCB ITCB-DV 6 5 SOLENOIDS W/1.0" DIA COIL SOLENOIDS W/1.48" DIA COIL To TANK gpm FLOW BUNN 90 psig max operating pressure Strainer/Flow Control # (Repl. Flow Washer # ) (Repl. Screen # ) gpm FLOW BUNN 90 psig max operating pressure Strainer/Flow Control # (Repl. Flow Washer # ) (Repl. Screen # ) 22 1 P

17 ITEM PART NO. QTY. DESCRIPTION Clamp WATER INLET & TANK DRAIN Bracket Screw, Pan Head #8-32 x.38" Fitting, Bulkhead.25" Flare Lockwasher, Internal-Tooth.438" Nut, Hex - Brass.438" ^ 1 Tube, Silicone.25" x 23.0" (Order item 32) (Models with 25.75" Trunk) ^ 1 Tube, Silicone.25" x 26.0" (Order item 32) (Models with 29.0" Trunk) Clamp, Hose-Snap Type.47"-.54" ID Fitting, 90 Silicone ^ 1 Tube, Silicone.50" ID x 11.0" (Order item 34) Tube, Silicone.25" ID x 12.0" (Use as required) Tube, Silicone.25" ID x 36.0" (Use as required) Tube, Silicone.25" ID x 120.0" (Use as required) Tube, Silicone.375" ID x 36.0" (Use as required) Tube, Silicone.375" ID x 120.0" (Use as required) Tube, Silicone.50" ID x 12.0" (Use as required) Tube, Silicone.50" ID x 36.0" (Use as required)

18 ELECTRICAL & OPERATING CONTROLS ITCB ITCB-DV ITCBA, 230V & ITCBB, 200V P

19 ITEM PART NO. QTY. DESCRIPTION Membrane Switch Sensing Coil Fastener ELECTRICAL & OPERATING CONTROLS Mount, Board (2 Used on Early Models) Control Board Nut, Keps # Spacer Memory Circuit Board Nut, Keps # Spacer (Early models Only) Transformer (Models ITCB-DV & ITCB-C-DV) Transformer (Models ITCBB, 200V) Transformer (Models ITCBA, 230V) Nut, Keps # Plug, Bezel Decal, Top Terminal Block (Models ITCB-DV & ITCB-C-DV) Terminal Block (Models ITCBB, 200V) Terminal Block (Models ITCBA, 230V) Screw, Truss Head #8-32 x.50" Screw, Grounding #10-32 x.38" (Early models) Screw, Grounding #8-32 x.50" (Late models) Switch, Toggle (Dual Voltage Brewers only) Bracket w/decals (Incls items 13 & 16-20) (Models ITCB-DV & ITCB-C-DV) Bracket w/decals (Incls items 13 & 17-20) (Models ITCBA, 230V & ITCBB, 200V) Screw, Pan Head #8-32 x.38" Decal, Voltage Selection (ICB-DV models only) Decal, Individual Circuit Info * 1 Decal, Use Copper Wire Only * 1 Decal, Supply Connection * 2 Decal, Ground Connector, Cable Hole Plug EMI Filter (Models ITCBA, 230V) Screw, Truss Head #6-32 x.38" Terminal Lug (Models ITCBA, 230V & ITCBB, 200V) Screw, Pan Head #8-32 x.38" (Continued)

20 ELECTRICAL & OPERATING CONTROLS (Continued) ITCB ITCB-DV ITCBA, 230V & ITCBB, 200V P

21 ITEM PART NO. QTY. DESCRIPTION ELECTRICAL & OPERATING CONTROLS Switch, 125/250V 50A Double Pole Screw, Truss Head, Locking #6-32 x.25" Cover Plate (Models w/out Switch) Screw, Truss Head, Locking #6-32 x.25" The following items are not illustrated Wiring Harness, Liquid Level Probe Power Cord (Dual Voltage Models only) Wiring Harness, Sensing Coil Wiring Harness, Memory Board (Early Models) Wiring Harness, Main (Dual Voltage Models only) Wiring Harness, Main (Models ITCBA, 230V & ITCBB, 200V) Wiring Harness, Main (Dual Voltage Models only) w/on/off Switch Decal, Cord Warning Wiring Harness, EMI Filter to Terminal block (Models ITCBA, 230V & ITCBB, 200V)

22 FUNNELS ITCB ITCB-DV P

23 FUNNELS ITEM PART NO. QTY. DESCRIPTION Funnel Assembly, Coffee-Black (Includes items 2 thru 6) Splashguard Funnel, Coffee-Black (Not Available. Order item 1) Decal, Caution - REMOVE FUNNEL Decal, Caution - HOT LIQUID Decal, COFFEE Funnel Assembly, Brew Tea - Smoke (Includes items 8 thru 14) Adapter W/Screen, Funnel (See item 15) Splashguard Funnel, Brew Tea - Smoke (Not Available. Order item 7) Decal, Caution - REMOVE FUNNEL Decal, Caution - HOT LIQUID Decal, QUICK BREW Funnel Tip,.114" Dia (See item 15) Funnel Tip & Screen Kit (Includes items 8 & 14) Funnel Assembly, Brew Tea - Smoke (Includes items 17 thru 22) Adapter W/Screen, Funnel (See item 15) Splashguard Funnel, Brew Tea - Smoke (Not Available. Order item 7) Decal, Caution - REMOVE FUNNEL Decal, Caution - HOT LIQUID Funnel Tip,.114" Dia (See item 15) Funnel Tip & Screen Kit (Includes items 8 & 14)

24 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO , , , , ,17, , ,13, ,11, , ,13, ,13, , ,13,