LCR-3 HV ILLUSTRATED PARTS CATALOG

Transcription

1 LCR-3 HV ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice. BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217) G 04/ Bunn-O-Matic Corporation

2 BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. ( BUNN ) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, thermal servers and ThermoFresh servers (mechanical and digital) 1 year parts and 1 year labor. 2) All other equipment - 2 years parts and 1 year labor plus added warranties as specified below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) Compressors on refrigeration equipment - 5 years parts and 1 year labor. c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for 4 years or 40,000 pounds of coffee, whichever comes first. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) or by writing to Post Office Box 3227, Springfield, Illinois ; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EX- PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment. THE BUYER S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages. 392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, Brew- WISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, imix, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage Bar Creator, Beverage Profit Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture Prompted Cleaning, Pouring Profits, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta brewer housing configuration is a trademark of Bunn-O-Matic Corporation

3 TABLE OF CONTENTS TITLE PAGE NO. Housing & Panels...4 Door Assembly...8 Cabinet Assembly...10 Refrigeration Components...12,16 Compressor Assy...20,22 Tank & Mounting...24 Tank Assembly...26 Dispense Valves & Lines...28 Pump Assembly...32 Electrical Components...34 Numerical Index

4 HOUSING & PANELS LCR-3 HV AIR FILTER CLEAN WEEKLY! (LOCATED UNDER THE DISPENSER) FILTRO DE AIRE LIMPIAR SEMANALMENTE! (LOCALIZADO DEBAJO DEL DISPENSADOR) Early Models P

5 ITEM PART NO. QTY. DESCRIPTION HOUSING & PANELS Cover Assy w/decals, Top Right (Includes items 2, 3 & 22) Screw, Truss Head #8-32 x.25" Decal, No Serviceable Parts Shield Bracket, Upper Cabinet Screw, Truss Head #8-32 x.25" Panel, Right Side (Includes items 6 & 7) Screw, Truss Head #8-32 x.25" Nut, Hex # Decal, Caution - Circuit Connection Decal, Optional Field Wiring Panel, Center Panel, Center (Models with improved left front access panel) Nut, Hex # Panel, Right Access (Includes items 2 & 10) Screw, Truss Head #8-32 x.25" Decal, Field Wiring Panel, Front Right Panel, Front Right (Includes item 14)(Models with improved left front access panel) Screw, Truss Head #8-32 x.25" Bracket, Lower Cabinet Bracket, Lower Cabinet (Models with improved left front access panel) Screw, Truss Head #8-32 x.25" Panel, Left Front (Includes item 14) Panel, Left Front (Models with improved left front access panel) Screw, Truss Head #8-32 x.25" Decal, Hot Liquids Support, Leg Nut, Hex # Base Leg Panel, Left Access (Includes items 2 & 19) Screw, Truss Head #8-32 x.25" Schematic, Electrical Panel, Left Side (Includes items 21 & 22) Screw, Truss Head #8-32 x.25" Nut, Hex #8-32 (Continued) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

6 HOUSING & PANELS LCR-3 HV (Continued) AIR FILTER CLEAN WEEKLY! (LOCATED UNDER THE DISPENSER) FILTRO DE AIRE LIMPIAR SEMANALMENTE! (LOCALIZADO DEBAJO DEL DISPENSADOR) Early Models P

7 ITEM PART NO. QTY. DESCRIPTION Decal, Refrigerant Charge (Cubigel Compressor) Decal, Refrigerant Charge (LG Compressor) Decal, Warning - Moving Parts Plug, Nylon BLK Panel, Rear (Includes items 25 & 26) Screw, Truss Head #8-32 x.25" Nut, Hex # Decal, Comply to Plumbing Code Decal, Warning - Electrical Cover, Top Left Screw, Truss Head #8-32 x.25" Cover Screw, Truss Head, Slotted #8-32 x.38" Bracket, Drip Tray Bracket Screw, Truss Head, Slotted #8-32 x.50" Drip Tray & Grate (Includes item Grate, Drip Tray Decal, Air Filter Drip Tray Kit (Includes items 29-32) Support, Cabinet (Late Models) Screw, Truss Head #6-32 x.50" Decal, Alternate Water/Electrical Location * 1 Bracket * 2 Rivet HOUSING & PANELS Catch, Snap-in (Models with second type door assy) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

8 DOOR ASSY LCR-3 HV Early Models P

9 ITEM PART NO. QTY. DESCRIPTION DOOR ASSY Door Assy w/decals (Doors with Spring Latch)(Includes item 2-6 & 8) Door Assy w/decals (Doors with Knob)(Includes item 2-4, 8 & 12) * 1 Door, Foamed (Doors with Spring Latch) * 1 Door, Foamed (Doors with Knob) Seal Panel Assy, Inner Door (Includes items 6 & 11) Screw, Truss Head #8-32 x.25" * 1 Keeper (Early Models) Screw Decal, Maintenance Plate, Door Hinge Screw Lockwasher Bushing Plate, Keeper (Early Models) Keylock w/keys Key Set (Includes 2 Keys) Decal, Air Filter Knob Bumper, Plug Ramp Screw Washer Latch, Door Screw, Pan Head #8-32 x.38" Door Hinge Retrofit Kit (Includes items 7, 13-15) Latch (Early Models) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

10 CABINET ASSY LCR-3 HV Connector Kits P

11 ITEM PART NO. QTY. DESCRIPTION CABINET ASSY * 1 Cabinet Assy, Foamed * 2 Cover, Vent Screw, Truss Head, Slotted #8-32 x.38" Fastener Pump Assy (See PUMP ASSY) Screw, Truss Head, Slotted #8-32 x.50" Tube, Norprene.25" ID x 9.0" Clamp.40/.45" Fitting, Elbow.25" x.38" barb * 1 Tube, Silicone.25" ID x 12.5" (Order item 15) * 1 Tube, Silicone.25" ID x 26.0" (Order item 15) Clamp.59/.66" Connector Tube Kit (Includes 3 each of items 5-9 & 12)(12.5" Tube) Tube Kit (Includes 3 each of items 5-9 & 12)(26.0" Tube) 12 M Lube Compound.30 oz Connector Connector Tube, Silicone.25" ID x 12.0" (Use as required) Tube, Silicone.25" ID x 36.0" (Use as required) Tube, Silicone.25" ID x 120.0" (Use as required) Tube & Adapter Kit (Includes 3 each of items 10 & 11) Tube & Adapter Kit (Includes 3 each of items 14 & 11) Tube & Adapter Kit (Includes 3 each of items 13 & 11) Tube Kit (Includes 3 of items 11)(26.0" Tube)(Used in Reduced Flow Rate applications) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

12 REFRIGERATION COMPONENTS (CUBIGEL COMPRESSOR) LCR-3 HV P

13 REFRIGERATION COMPONENTS (CUBIGEL COMPRESSOR) ITEM PART NO. QTY. DESCRIPTION Foam, Evapoator Top Strap Screw, Truss Head, Slotted #8-32 x 2.0" * 1 Foam, Evaporator Screw, Truss Head, Locking #8-32 x.25" Nut, Hex # * 1 Pan, Evaporator Sensor Cable Tie Fan Screw, Pan Head, Slotted #6-32 x 1.50" Bracket, Evaporator Fan Screw, Truss Head, Locking #8-32 x.25" * 1 Evaporator Screw, Hex Crimptite #8-32 x.375" Adapter, Reducer (Requires brazing to install) Filter Dryer (Requires brazing to install) Tube, Process (Requires brazing to install) Tee, Reducer (Requires brazing to install) Condenser Screw, Hex, Crimptite #8 x.38" Bracket, Condenser Mtg Screw, Truss Head, Locking #8-32 x.25" Air Duct Screw, Truss Head, Locking #8-32 x.25" Nut, Hex # Screw, Truss Head #8-32 x.25" Nut, Keps # Air Filter Assy (Includes Velcro Straps) Base,Refrigeration Nut, Hex # Panel, Fan Mtg Screw, Truss Head #8-32 x.25" * 1 Edging, Adhesive Lined 2.5" (Order item 47) Motor, Fan Screw Blade, Fan Nut, Keps (Continued) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

14 REFRIGERATION COMPONENTS (CUBIGEL COMPRESSOR) LCR-3 HV (Continued) P

15 REFRIGERATION COMPONENTS (CUBIGEL COMPRESSOR) ITEM PART NO. QTY. DESCRIPTION Compressor (See COMPRESSOR COMPONENTS) * 4 Washer, Flat Nut, Hex * 1 Tube (Requires brazing to install) Tube (Requires brazing to install) Accumulator (Requires brazing to install) Cup, Condensate * 1 Tube (Requires brazing to install) Tube (Requires brazing to install) * 1 Tube (Requires brazing to install) Guard * 1 Tube (Requires brazing to install) * 1 Tube (Requires brazing to install) Spacer Nut, Hex # M * - Tape, Insulating (use as required) * 1 Tube, Silicone.313"ID x 36.0" (Order item 48) Elbow Grommet Bracket Screw, Truss Head, Locking #8-32 x.25" Shield Screw, Truss Head, Locking #8-32 x.25" Tube, Low Side (Requires brazing to install) Plug Bushing Shield, Circuit Board Screw, Truss Head #8-32 x.25" (Front) Screw, Truss Head, Locking #8-32 x.25" (Rear) The following items are not illustrated 46 M Tape, Insulating (30.0 ft roll) Wiring Harness, Compressor Edging, Adhesive Lined 36.0" (Use as required) Tube, Silicone.313"ID x 36.0" (Use as required) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

16 REFRIGERATION COMPONENTS (LG COMPRESSOR) LCR-3 HV P

17 ITEM PART NO. QTY. DESCRIPTION Foam, Evapoator Top Strap Screw, Truss Head, Slotted #8-32 x 2.0" * 1 Foam, Evaporator Screw, Truss Head, Locking #8-32 x.25" Nut, Hex # * 1 Pan, Evaporator Sensor REFRIGERATION COMPONENTS (LG COMPRESSOR) Cable Tie Fan Screw, Pan Head, Slotted #6-32 x 1.50" Bracket, Evaporator Fan Screw, Truss Head, Locking #8-32 x.25" * 1 Evaporator Screw, Hex, Crimptite #8 x.375" Adapter, Reducer (Requires brazing to install) Filter Dryer (Requires brazing to install) Tube, Process (Requires brazing to install) Tee, Reducer (Requires brazing to install) Condenser Screw, Hex, Crimptite #8 x.38" Bracket, Condenser Mtg Screw, Truss Head, Locking #8-32 x.25" Air Duct Screw, Truss Head, Locking #8-32 x.25" Nut, Hex # Screw, Truss Head #8-32 x.25" Nut, Keps # Air Filter Assy (Includes Velcro Straps) Base,Refrigeration Nut, Hex # Panel, Fan Mtg Screw, Truss Head #8-32 x.25" * 1 Edging, Adhesive Lined 2.5" (Order item 48) Motor, Fan Screw Blade, Fan Nut, Keps (Continued) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

18 REFRIGERATION COMPONENTS (LG COMPRESSOR) LCR-3 HV (Continued) P

19 ITEM PART NO. QTY. DESCRIPTION Compressor (See COMPRESSOR COMPONENTS) * 4 Washer, Flat Nut, Hex * 1 Tube (Requires brazing to install) * 1 Tube (Requires brazing to install) Accumulator (Requires brazing to install) Cup, Condensate * 1 Tube (Requires brazing to install) Tube (Requires brazing to install) * 1 Tube (Requires brazing to install) Guard * 1 Tube (Requires brazing to install) Spacer Nut, Hex # M * - Tape, Insulating (use as required) * 1 Tube, Silicone.313"ID x 36.0" (Order item 49) Elbow Grommet Bracket Screw, Truss Head, Locking #8-32 x.25" Shield Screw, Truss Head, Locking #8-32 x.25" Tube, Low Side (Requires brazing to install) Plug Bushing Shield, Circuit Board Shield, Circuit Board (Models with improved left front access panel) Screw, Truss Head #8-32 x.25" (Front) Screw, Truss Head, Locking #8-32 x.25" (Rear) Shroud, LH Shroud, RH Screw, Truss Head, Slotted #8-32 x.38" The following items are not illustrated REFRIGERATION COMPONENTS (LG COMPRESSOR) 46 M Tape, Insulating (30.0 ft roll) Wiring Harness, Compressor Edging, Adhesive Lined 36.0" (Use as required) Tube, Silicone.313"ID x 36.0" (Use as required) Wiring Harness, Fan/Compressor Power * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

20 COMPRESSOR ASSY (LG) LCR-3 HV P

21 ITEM PART NO. QTY. DESCRIPTION COMPRESSOR ASSY (LG) Compressor 120V (Includes items 1-5) Relay, Compressor 120V Overload Protector 120V Cover Screw M4 x.61" lg Grommet Sleeve Terminal Adapter, Grounding * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

22 COMPRESSOR ASSY (CUBIGEL) LCR-3 HV P

23 COMPRESSOR ASSY (CUBIGEL) ITEM PART NO. QTY. DESCRIPTION Compressor 120V (Includes items 1-6) Relay, Compressor 120V Overload Protector 120V Cable Strain Relief Cover Mounting Kit (Includes 4 Grommets and Sleeves) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

24 TANK & MOUNTING LCR-3 HV P

25 ITEM PART NO. QTY. DESCRIPTION TANK & MOUNTING Tank Assy (See TANK ASSY) Nut, Hex # * 1 Tube, Silicone.38" x 2.0" (Order item 12) Clamp.59/.66" Fitting, Tee.38" barb Clamp.62/.71" * 1 Tube, Silicone.38" x 11.0" (Order item 12) * 1 Tube, Silicone.38" x 21.0" (Order item 12) Clip, Shut-off Plug, Hose Bracket, Lower Tank Nut, Hex # Valve Assy (Includes fittings) Fastener, U-type # Screw, Truss Head, Slotted #8-32 x.38" Tube, Silicone.38" x 12.0" (Use as required) Tube, Silicone.38" x 30.0" (Use as required) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

26 TANK ASSY LCR-3 HV P

27 ITEM PART NO. QTY. DESCRIPTION Tank Assy Gasket, Tank Lid TANK ASSY Tank Lid Nut, Hex # Heater, Tank (Includes item 5) Nut, Hex # Gasket, Tank Heater Grommet Probe, Liquid Level Nut, Hex # Lockwasher, Internal-tooth # Washer Probe, Liquid Level Nut, Hex # Lockwasher, Internal-tooth # Washer Limit Thermostat, Double Nut, Hex # Grommet Probe, Temperature Bracket, Upper Tank Nut, Hex # Fitting, Tank Vent Elbow SST Tube, Silicone.312" x 36.0" The following items are not illustrated Wiring harness, Thermostat * 2 Lead, 12 AWG BLU 9.0", Tank Heater to Limit Thermostat Lead, 12 AWG RED 7.0", Tank Heater to Limit Thermostat Lead, 12 AWG BLK 5.5", Tank Heater to Limit Thermostat Tank Assy. (Includes items 1-15) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

28 DISPENSE VALVES & LINES LCR-3 HV P

29 ITEM PART NO. QTY. DESCRIPTION DISPENSE VALVES & LINES * 1 Tube, Silicone.50" ID x 12.0" (Order item 38) Clamp.81/.97" * 1 Tube, Silicone.38" ID x 7.5" (Order item 39) Reducer Clamp.59/.66" Faucet, Hot Water (Includes items 7-12) * 1 Body, Faucet (Order item 6) Cup, Seat Stem Faucet Spring, Faucet Handle, Faucet RED Pin, Spring Bonnet, Faucet Nut, Hex UNF Plate, Faucet Screw, Truss Head #8-32 x.25" * 1 Tube, Silicone.50" ID x 11.0" (Order item 38) * 1 Tube, Silicone.50" ID x 15.0" (Order item 38) Fitting, Elbow.50" barb * 2 Tube, Silicone.50" ID x 3.6" (Order item 38) Bracket, Valve Mtg Screw, Truss Head #8-32 x.25" Valve, Dispense Screw, Truss Head #8-32 x.25" * 1 Tube, Silicone.38" ID x 19.0" (Order item 39) Elbow 45 w/vent port * 1 Tube, Silicone.125 ID x 29.0" (Order item 40) Clamp, Adhesive Back Clamp.71/.80" * 1 Tube, Silicone.50" ID x 4.0" (Order item 38) * 2 Cable Tie (Continued) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

30 DISPENSE VALVES & LINES LCR-3 HV (Continued) P

31 ITEM PART NO. QTY. DESCRIPTION DISPENSE VALVES & LINES Clamp, Nylon Nut, Hex # Manifold Screw, Truss Head #8-32 x.25" Bushing * 2 Tube, Silicone.50" ID x 1.1" (Order item 38) Sensor, Conductance * 1 Tube, Silicone.38" ID x 3.0" (Order item 39) Dispense Tube Screw, Truss Head, Slotted #8-32 x.38" Restrictor (Used in Reduced Flow Rate applications) The following items are not illustrated Faucet Repair Kit (Includes items 8-12) Tube, Silicone.50" ID x 12.0" (Use as required) Tube, Silicone.50" ID x 36.0" (Use as required) Tube, Silicone.38" ID x 12.0" (Use as required) Tube, Silicone.38" ID x 30.0" (Use as required) Tube, Silicone.38" ID x 12.0" (Use as required) Tube, Silicone.38" ID x 36.0" (Use as required) Tube Kit (Used to fill large servers) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

32 PUMP ASSY LCR-3 HV P

33 ITEM PART NO. QTY. DESCRIPTION PUMP ASSY Pump Assy (Includes items 1-24) Motor Magnet Hub Lockwasher, External-tooth # Screw, Round Head, Slotted, Locking #10-32 x 0.5" Sensor, RPM Screw, Truss Head, Slotted #4-40 x.38" Bushing * 1 Insulation, Pump * 1 Bracket, Front Mtg Nut, Flanged # Block Assy, Pump (Includes items 18 & 19) Screw, Shoulder #10-32 UNF Screw, Pan Head, Slotted #6-32 x.312" Standoff, Pump Band Compression Band Assy Screw, Truss Head, Locking #8-32 x.25" Rotor Retaining Ring Bearing Insert, Threaded E-ring, Retaining Cover, Pump Block Screw, Captive #10-32 x.625" Fastener Cable Tie (Not Illustrated) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

34 ELECTRICAL COMPONENTS LCR-3 HV P

35 ITEM PART NO. QTY. DESCRIPTION ELECTRICAL COMPONENTS Bracket, Power Supply Nut, Hex # Power Supply Screw, Pan Head M3 x 4mm Lug, Terminal Nut, Hex # Decal, Grounding Connector, Cable Terminal Block, 4-pole Screw, Phillips Head #8-32 x 1.25" Decal, L1-L2-L3-N Contactor, 3-pole ScrewTruss Head #8-32 x.38" Capacitor, EMI Filter Switch, Door Open Switch, Master ON/OFF Screw, Truss Head #6-32 x.25" (Mounting) Screw, Pan Head #10-32 x.38" (Terminals) Lockwasher #10 (Terminals) Circuit Board, Main Screw, Truss Head #6-32 x 1.0" Nut, Hex # Spacer Circuit Board, Auxillary Screw, Truss Head #6-32 x 1.0" Nut, Hex # * 1 Switch, Membrane Decal, Membrane Switch Overlay Switch, Rotary 3 Position Knob, Rotary Switch Setscrew #8-32 x.25" Switch, Selector Cap, Selector Switch (Continued) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

36 ELECTRICAL COMPONENTS LCR-3 HV (Continued) P

37 ITEM PART NO. QTY. DESCRIPTION The following items are not illustrated * 1 Cable Tie ELECTRICAL COMPONENTS Jumper Jumper (Used in Reduced Flow Rate applications) * 1 Lead, 18AWG WHI, 8.0" Wiring Harness, Tank Lockwasher, Ground Location at Tank Wiring Harness, Master Switch to Contactor Wiring Harness, Terminal Block to Master Switch Wiring Harness, Solenoid Wiring Harness, Aux Circuit Board to Motor Wiring Harness, Contactor to Terminal Block * 1 Lead, GRN 10.0", Power Supply Grounding * 1 Lead, GRN 11.0", Compressor Grounding Cable Tie (Attaches solenoid harness to solenoid bracket) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement

38 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO , ,17,33, , ,15, ,35, ,7,13, ,27, , , ,7,9,13, ,19,29, ,15,17,19, ,11,19,25, , , , , , , ,19, ,25, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,17, , , , ,

39 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO , , , , , , , , , , , M M ,19 M ,