Fittings and accessories
|
|
|
- Bethany Walsh
- 5 years ago
- Views:
Transcription
1 Connectors L1 1 Poyamide pipe Union screw Taper ring Connector Insert seeve state: 01.12EN Connector with cyindrica or conica screw-in thread ateria stee gavanized and chromated yeow. Order-no. 1 L1 Screw-in thread x cyindrica x1 8x1 18 7,5 cyindrica x1 8x1 18 7,5 14 cyindrica x1 8x cyindrica x1,5 8x cyindrica x1 10x1 23 7,5 14 cyindrica x1 10x1 20,5 7,5 14 cyindrica x1 10x1 20, cyindrica x1,5 10x1 20, cyindrica x1,5 10x1 20, cyindrica G1/4 10x1 21, cyindrica G3/8 10x1 22, cyindrica x1 14x1,5 28 7,5 17 cyindrica x1 14x1, cyindrica x1,5 14x1, cyindrica x1,5 14x1, cyindrica x1,5 14x1, cyindrica x1,5 14x1, cyindrica G1/4 14x1, cyindrica x1 16x1, cyindrica x1,5 16x1, cyindrica x1,5 16x1, cyindrica x1,5 16x1, cyindrica x1,5 16x1, cyindrica G1/4 16x1, cyindrica G1/2 16x1, cyindrica k 4 6k 8x conica* k 4 6x0,75k 8x conica* k 4 8x1k 8x1 17 7,4 11 conica* k 4 10x1k 8x1 16 7,4 11 conica* k 4 R1/8"k 8x conica* k 4 R1/4"k 8x conica* k 6 10x1k 10x1 23 7,4 14 conica* k 6 12x1k 10x1 18 7,4 14 conica* k 6 R1/8"k 10x conica* k 6 R1/4"k 10x conica*
2 Union screws, oives 1 Union screw state: 01.12EN Union screws acc. to DIN 3871, for oives DIN 3862 ateria: stee, surface gavanized and chromated yeow Order-no. 1 Series* ,5 6x0, LL x LL x LL x1 14 9,5 12 LL x1, ,5 12 L x1, ,5 14 L x1, ,5 17 L *Per. operating pressure Series LL: 100 bar Series L: 250 bar Series S: 400 bar Oives acc. to DIN 3862 Order-no. PipeØ L Ød1 Ød2 ateria ,5 4,5 5,0 2,5 2,8 brass ,5 4 4,3 stee ,5 4 4,3 brass ,5 4 4,3 stainess stee ,5 6 6,4 stee ,5 6 6,4 brass ,5 6 6,4 stainess stee ,5 8 8,5 stee ,5 8 8,5 brass , ,5 stee , ,5 brass L Ød1 Oive Pipe Ød2
3 Union screws, oives 1 Union screw Oive Poyamide pipe Insert seeve Union screws for poyamide pipe ateria: brass (CuZn39Pb3) Order-no ,5 6x0,75 9 6, x x x1, , x1, , Ød 1 Oives for poyamide pipe Order-no. Ød 1 1 ateria ,5 2,55 4,5 3,4 6,4 2,5 brass , brass , ,5 4 brass , brass , ,5 6 brass state: 01.12EN
4 Bukhead fittings, reducing fittings D state: 01.12EN Bukhead fitting with cutting ring ateria: stee, gavanized and chromated yeow Order-no. D 1 L1 SW x1,5 8x L 4 14x1,5 8x x1,5 10x x1,5 16x1, Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar no information: 100 bar Reducing fitting with cutting ring ateria: stee, gavanized and chromated yeow Order-no x1,5 Ø ,5 approx. 51 L1 Ø8
5 Bukhead fittings S1 S2 S3 t L4 approx. L1 approx. L3 Straight bukhead fitting with cutting ring ateria: stee, gavanized and chromated yeow. Order-no. Series* L1 L3 L4 S1 S2 S3 tmax Annotation L 12x1, L 12x1, stainess stee L 14x1, L 14x1, stainess stee *Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar S3 S2 S1 t L4 approx. L3 L5 approx. L1 Anguar bukhead fitting with cutting ring ateria: stee, gavanized and chromated yeow Order-no. Series* L1 L3max L4 L5 S1 S2 S3 tmax Annotation L 12x1, L 12x1, stain. stee S 14x1, L 14x1, *Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar state: 01.12EN
GROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
Remote reading dial thermometers, version for industry
Remote reading dial thermometers, version for industry Type 313 WH, 323 TA, 333 TE and 334 KL Measuring system Nitrogen filled Type 313 WH Accuracy (EN 13190) Class 1 Case Crimped-on ring, stainless steel
KombiTemp. Head form B / Head form J Cable socket, angle type Diesel engine dial thermometers. Temperature Sensors with local display
JJ Head form B / Head form J JJ Cable socket, angle type JJ Diesel engine dial thermometers KombiTemp Temperature Sensors with local display Including products with: DS_KombiTemp 8/5 Dual temperature control
Page
Tecnoinanles Page 68 69 69 70 70 71 72 72 72 www.tecnoin.com 1 1 5 3 S O I D N D E W I T T R E D E D I N S E R T S Coe c t Color 115312301 124 109 ± 1 M6 45 21 10 Black 115314301 148 132 ± 1 M8 54 24 14
3-PIECE TUBE ASSEMBLY
3-PIECE TUBE ASSEMBY STAINESS STEE HIGH PRESSURE 37 TUBE FITTINGS 1/8 TO 2 MEETS SAE STANDARD J514 If necessary, see SAE Standard J514 for a complete list of dimensions. NPT Tapered Pipe Threads meet the
Prestolok. Spark resistant push-in fittings for fluids. Catalogue /UK
Spark resistant push-in fittings for fuids Cataogue 352-/UK Cataogue 352-/UK Index Straight connectors Mae - BSPT Mae - Metric Mae - BSPT Mae - NPTF F23PB - p. C F2PB - p. C F3PB - p. C FPB - p. C Mae
Process Connections for Dial Thermometers
sales@jumo.co.uk Data Sheet 608730 Page 1/7 Process Connections for Dial Thermometers Special features Temperature probes (TF) Process s (TA) Thermowell (SH) Temperature probes (TF) (S 1 min. 25 mm for
Precision Bourdon tube pressure gauges
Pressure gauges Precision pressure gauges High accuracy (class 0.6) Housing can be plumbed Serial number on dial Suitable as measuring equipment as per QA requirements DNV- and GOSSTANDART-certified A
Bimetal Thermometers Process Industry Series, Model 55
Mechanical Temperature Measurement Bimetal Thermometers Process Industry Series, Model 55 WIKA Data Sheet TM 55.01 Applications Chemical industry, petrochemical industry, process technology and food industry
Thermal hysteresis 0.5% max. of full scale (within compensated temperature range) 1% max. for ranges mbar mbar mbar
Pressure Transmitter Type FM40466 General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The measuring device for the transmitter
Pressure transmitter for elevated media temperatures
Data Sheet 402050 Page 1/7 JUMO dtrans p31 Pressure transmitter for elevated media temperatures General application Pressure transmitters are used for measuring the relative (gauge) and absolute pressures
Differential-Pressure Flow Meter
Design and application The metering orifice measures and monitors the flow rate of liquids. The user mounts the orifice between flanges or with Rp screwed connections into the conduit. The unimpeded, straight
2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50
/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5
Pressure independent control valve with integrated flow limiter AVQM (PN 16) - return and flow mounting
Data sheet Pressure independent control valve with integrated flow limiter AVQM (PN 16) - return and flow mounting Description Controllers are used together with Danfoss electrical actuators: AMV 0 1)
Quick Connect Couplings Series ES single shut-off - The ORIGINAL DN 7.2
Quick Connect Coupings Series ES singe shut-off - The ORIGINAL Quick Connect Coupings of brass or brass MS 58 nicke-pate New hose barb for safe fit of hose an easy assemby Seeve esign protects the couping
Pressure Transmitter JUMO dtrans p30 Type
Data Sheet 40466 Page 1/6 Pressure Transmitter JUMO dtrans p0 Type 40466 General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The
Thermostatic actuator RAVI - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) Description RAVI is self-acting thermostatic actuator primarily for use for temperature control of small hot water cylinders - either storage
Dial thermometers. Gas filled system and Bi-metal. dial thermometers
JJ Dial thermometers JJ Diesel engine thermometers JJ Low temperature dial thermometers JJ Remote reading dial thermometers JJ Remote reading diesel engine thermometers JJ Remote reading low temperature
Technical Data, Dimensioning, Mounting
6 Bosch Rexroth AG R310EN 3105 (2005.06) and Shafts Technical Data, Dimensioning, Mounting Speed v max = 5 m/s Acceleration a max = 150 m/s 2 Operating temperature 20 C to +100 C Dimensioning The load
Fittings and Accessories. for Centralized Lubrication Systems and General Use
and Accessories 1-0103-US 1 Fittings and Accessories 1-0103-US for Centralized Lubrication Systems and General Use Fittings and Accessories 1-0103-US 3 Contents Page Adaptors... 9, 10 Banjo fittings...
MarCator 1087 ABS USB. No interface box is required! Simple and inexpensive way to set up a multiple measuring. Digimatic. evaluation instrument
- -46 MarCator 1087 The new Digita Indicator Marcator 1087. The muti-functiona Digita Indicator with a combined anaog and digita dispay; pus toerance and dynamic measuring functions. D y n a m i c m e
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
Accessories Cable glands
Accessories Cable glands 235 Technical data Cable glands Brass hexagon cable gland Brass sealing cable gland Material: Brass, nickel-plated Gasket: Soft rubber Protection type IP 54 Additional information:
ASEPTIC-0-RING UNIONS Female Union Union Nut Male Union O-Ring Reduced Female Union Reduced Male Union...
ASEPTIC-0-RING UNIONS Female Union... 68 Union Nut... 69 Male Union... 70 O-Ring... 71 Reduced Female Union... 72 Reduced Male Union... 73 Female Cap... 74 Male Cap... 75 Female Union Female Union Surface
Air vane motors for special applications
Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high
RK SAFETY CLAMPS EN / DIN 2817
STANDARD LMC's RK safety clamps are manufactured in compliance with EN 14420-3 / DIN 2817, and are used to assemble EN/DIN standardized hoses. Threaded-, quick- and flange couplings with a smooth hose
Data sheet Pressure independent control valve with integrated flow limiter AVQM (PN 16) - return and flow mounting
Pressure independent control valve with integrated flow limiter AVQM (PN 16) - return and flow mounting Description Controllers are used together with Danfoss electrical actuators: - AMV 150 1) - AMV(E)
Flow controller with integrated control valve (PN 16) AVQM - return and flow mounting
Data sheet Flow controller with integrated control valve (PN 16) AVQM - return and flow mounting Description The controller has a control valve with adjustable flow restrictor, connection neck for electrical
Pressure relief controller AFA / VFG 2(1) (PN 16, 25, 40)
Data sheet Pressure relief controller AFA / VFG 2(1) (PN 16, 25, 40) Description The controller is a self-acting pressure relief controller primarily for use in district heating systems. The controller
Test Coupling with Ball Check
Test 15 Connection Tread Introduction SMK15 Test Coupling wit Ball Ceck Test Coupling SMK15 Internal Ball Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast coupling for Monitoring
Uniwat. Resilient Seated Gate Valves
Uniwat Resilient Seated Gate Valves www.comeval.es Resilent Seated Gate Valves - UNIWAT 504/507 Copyright COMEVAL VALVE SYSTEMS - Data subject to revision - Regularly updated data on www.comeval.es - DS01
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 Standard valve body Type 2000 can be combined with Short valve body High flow rate and long life cycle Very high cycle
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
Design and applications
Design and applications The DDM-DS11 measuring system measures and monitors the flow rate of liquids and gases. The device works according to the principle of differential pressure. The differential pressure
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a reduction gear and cam. The
Diaphragm Valve, Plastic 2/2 way, motorized
Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features
Series 20 D. Pressure switches for all-fluid technique Port sizes G 1 /4 and G 1 /2
Series 0 D Pressure switches for all-fluid technique Port sizes and Microswitch with gold-plated contacts (silver plated for outdoor variants) Plug-in connection to DIN 4650 Technical Data Fluid: Neutral
72 PITCH 1/8 FACE 1/8 BORE 20 PRESSURE ANGLE. 29L (800) In CT: (203) NORDEX
20 PRESSURE ANGE 1/8 BORE 5 5 3 STAINESS STEE 2024-T4-AUMINUM ORDER BY CATAOG NUMBER *AS-G1-20 *AS-G1-22 *AS-G1-24 AS-G1-26 AS-G1-27 *AA-G1-20 *AA-G1-22 *AA-G1-24 AA-G1-26 AA-G1-27 20 22 24 26 27.2777..3333.10.37.6.333.1.389.3
P0440. Plastic Head Knurled Thumb Screws. Screws d 4 d 1 d 2. d 3. h 2 h 1. l 1
Thumb Pastic Head Knured Thumb 0.5 2 d 4 P0440 1 Thermopastic (PA), back knob. Thread stainess stee (A2) or stee (zinc-pated). Technica Notes Temperature resistant from -30 C to +80 C. Order No. 1 d 4
Solenoid Valve, Plastic
Solenoid Valve, Plastic Construction The EMÜ directly controlled 2/2-way plastic solenoid valve has a high performance coil which is hermetically separated from the medium by means of a flexible PTFE bush.
Handwheels, handles, position indicators
Handwheels, handles, position indicators 217 218 Product overview Handwheels, handles, position indicators Grey cast iron handwheels DIN 950 K0671 Handwheels with cylindrical fold-away grip K0258 Aluminium
SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
Speed Controller with One-touch Fitting AS13 1F-M3 AS13 1F-M5. Specifications
Speed Controller with One-touch Fitting Series Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube
The valves can be controlled electronically by thermal actuators or act as self-acting units by means of remote temperature adjusters.
Floor Heating Manifold FHF Application The Manifold FHF is used for controlling water flow in under floor heating systems. Each tube of the floor heating system is connected to the manifold, thus making
SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
display on the wall or in a panel away from the inline sensor SE30 for easy meter reading.
Analogue Flow Rate Indicator, DN 15...; PN 1...16 Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a large
Valve Blocks. For direct flanging to pressure and differential pressure transmitters. Drop-forging housing. Replaceable valve seat
Data Sheet 10/14-5.32-EN Valve Blocks For direct flanging to pressure and differential pressure transmitters Drop-forging housing Replaceable valve seat Valve stem with back-flow seal and crimped valve
Order No light grey. Order No black
DPP- Plastic dome plug Body: Polyamide (V2 acc. to UL94) Sealing: Neopren Dynamic: -20 ~+80, short term:100 _ Easy and quick assembly Color: RAL7001 silver grey RAL7035 light grey RAL9005 black Blue, Red
GTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
VS / 069 / 077 / 079
Vibration Velocity Sensors VS - 068 / 069 / 077 / 079 12 75 (80 bei VS-079) ø 38 M10 Meßrichtung Direction of measurement Direction de mesure SW 27 10 r 50 mm min 0,3 m 4,7 m VS06x07x (010130) Zulässiger
High pressure valves. 80 to 350 bar
80 to 350 bar High switchable p Hermetically sealed poppet valves Excellent repeatability of switching times Function even with lager voltage tolerance Compact design DN to DN 40 Technical data Medium:
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Safety Clamps
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Safety Clamps General Information Safety clamps EN 14420-3/DIN 2817
BR 30a. Pneumatic Multi-turn Actuator. Application: Special designs:
Pneumatic Multi-turn Actuator BR 30a Application: Single-acting pneumatic diaphragm multi-turn actuator for butterfl y valves and other rotary valves: The pneumatic BR 30a Multi-turn Actuators are diaphragm
Lined Butterfly Valve Pfeiffer Type BR 10a
Lined Butterfly Valve Pfeiffer Type BR 10a Application Tight closing, double eccentric butterfly valve with PTFE lining for process engineering and plants with industrial requirements, especially suitable
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
Pressure switches hex 24
Pressure switches Normally open or normally closed, maximum voltage 42 V Low-cost solution for mechanical pressure monitoring. Stable switching point even after long use and high load. Switching point
Industrial: Flare Fittings
Industria: Fare Fittings SAE 45 Fare Resists echanica Pu-out eets SAE Functiona Requirements Resists Vibration U isted Inverted Fare Stee ut option Economica U isted Access Vaves Finger Tight Quick Sea
SCREW HOSE COUPLINGS SCREW HOSE COUPLINGS B.1. STANDARD. LMC s screw hose couplings with a smooth hose shank comply with EN / DIN 2817.
SCREW HOSE COUPLINGS B.1. STANDARD LMC s screw hose couplings with a smooth hose shank comply with EN 14420-5 / DIN 2817. OPERATION Screw hose couplings are used to connect hoses with male or female BSP,
Type TW17 FUTURE. TECHNOLOGY. TODAY. WEH Connector for pressure and function testing. DatA Sheet. on components with internal thread
Dat Sheet D-2011/09/00027-2-3 Date: 01/2013 Type TW17 WEH Connector for pressure and function testing on components with internal thread FUTURE. TECHNOLOGY. TODY. General Description Features Connection
Rotary inlets for pressurised oil, compressed air
Rotary inlets for pressurised oil, compressed air Product data sheets Rotary inlets for pressure oil, single channel 0086-010-size-160 9.03.00 Rotary inlets for pressure oil, two- channel 0088-226/326-size-010040
Diesel engine dial thermometers
Diesel engine dial thermometers Local reading dial thermometers This range of instruments includes special precision dial thermometers optimised for marine engines, based on the nitrogen gas expansion
Gas Actuated Thermometers Stainless Steel Series, Model 73
Mechanical Temperature Measurement Gas Actuated Thermometers Stainless Steel Series, Model 73 WIKA Data Sheet TM 73.01 Applications For aggressive media in the chemical, petrochemical and process engineering
Pressure Transmitter JUMO dtrans p30 Type
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 609 Fulda, Germany Postal address: 605 Fulda, Germany Phone: +49 661 600-0 Fax: +49 661 600-607 e-mail: mail@jumo.net Internet: www.jumo.net JUMO
Temperature controller AVT with safety temperature monitor STM / VGS for steam (PN 25)
Data sheet Temperature controller AVT with safety temperature monitor STM / VGS for steam (PN 25) Description Controller closes on rising temperature. The controllers are: - Type-tested acc. to EN 14597
MarCator 1087 R ABS. Just set once to zero. Battery service life is 3 years. Error free operation
- -6 MarCator 1087 R The new Digita Indicator MarCator 1087 R. The muti-functiona Digita Indicator with a combined anaog and digita dispay as we as toerance and dynamic measuring functions. Dynamic measuring
Selection Tool. on the Internet at in the section MÄDLER -Tools. Other sizes and designs on request. Connecting Shafts Page 766
Couplings Overview Friction Clutches Friction Clutches Type B Axial Arrangement Friction Clutches Type C Transversal Flexibility Sliding Hubs with Torsionally-Flexible Coupling Multi-Disk Friction Clutches
ARMATUREN TYPE ISO-STANDARD A. Plug valve with chemical-resistant vacuum-proof lining DN / PN NPS ½ - 12 / class
TYPE ISO-STNDRD Plug valve with chemical-resistant vacuum-proof lining DN 15-300 / PN 10-40 NPS ½ - 12 / class 150-300 RMTUREN free of cavity & maintenance 2.1 free of cavities Maintenance free and self
Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
* * Data sheet DA A (ATEX) Differential pressure measuring device for potentially explosive areas
09015062 DB_EN_DA10_ATEX Rev. ST4-A 03/18 *09015062* Data sheet DA10... 0A (ATEX) Differential pressure measuring device for potentially explosive areas Gas explosion protection Zone 1 and 2, gases and
EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
Contact Dial Thermometer
Data sheet 608523 Page 1/8 Contact Dial Thermometer Special features Class 1.5 Display range -40 C to +600 C Temperature controller with actual value display as built-in or add-on device in the stainless
PIPE SYSTEM TECHNICAL DATA
PIPE SYSTEM TECHNICA DATA Information The Alvenius standard product range is approved according to PED 97/23/EC. The PED approval has been integrated with the certified Quality Management System. t Outside
GEZE TS 4000 E. Overhead door closer with electrohydraulic hold-open according to EN 1155, closing force size 1-6.
TS 4000 E Overhead door closer with electrohydraulic hold-open according to EN 1155, closing force size 1-6 Product features Closing force size EN 1-6 adjustable Closer in only one construction size Optical
USE-USU. Steel independent chucks. Steel independent chucks USE-USU
USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually
Diesel engine dial thermometers
Diesel engine dial thermometers Local reading dial thermometers This range of instruments includes special precision dial thermometers optimised for marine engines, based on the nitrogen gas expansion
Materials. Brass, gold-plated Stainless steel, gold-plated. Mounting hole size in CEM1 and FR4 with receptacle:
Grid:,9 mm 75 Mil Installation height with KS: 3,0 mm (.8) Recommended stroke:,0 mm 96 Product Information vailable tip styles Further versions (inch) Standard 3 05 0,50 (.020) E-TYPE DKS ø,2(.047) ø,5(.059)
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S
DIN EN General
DIN EN 10357 General DIN EN 10357 was developed for seam welded tubes made of stainless steel for pipeline systems in the food, pharmaceutical and chemical industries. DIN EN 10357 (2014-3) replaces DIN
ANSI version. The valve closes when the differential pressure rises
Self-operated Regulators Series 42 Differential Pressure Regulator with Type 2424/Type 2428 Actuator and Type 2422 Valve Type 42-24 A Type 42-24 B Type 42-28 A Type 42-28 B ANSI version Application For
Mechanical Measuring Instruments
JJ SIKA thermometers JJ SIKA glass inserts for replacement JJ Diesel engine protection tubes JJ Diesel engine thermometers JJ KombiTemp dial thermometers JJ Bimetal dial thermometers JJ Pressure gauges
Technical Manual. Register 18 Contents - T4E
Page: 1 Contents Register 18 Contents - T4E Page Technical Data T4E-1, DN½ to DN6...2 Technical Data T4E-1, DN8 to DN12...3 Technical Data T4E-2, DN15 to DN150...4 Technical Data T4E-2, DN200 to DN300...5
Differential pressure relief controller (PN 16, 25, 40) AFPA / VFG 2(1)
Data sheet Differential pressure relief controller (, 25, 40) AFPA / VFG 2() Description The controller has a control valve, an actuator with one control diaphragm and spring for differential pressure
Flow controller (PN 16, 25, 40) AFQ / VFQ 2(1) - return and flow mounting
Data sheet Flow controller (PN 16, 5, 40) AFQ / VFQ ( - return and flow mounting Description The controller has a control valve with adjustable flow restrictor and an actuator with one control diaphragm.
Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
CoA. Constant Face Drivers. Constant Face Drivers CoA
CoA Constant Face Drivers CoA - hydraulic pressure compensation provides a uniform clamping force also on uneven faces of workpieces - approx. value for an axially admitted total load of the 3 supporting
BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
Solenoid valve. Technical data Orifice 1/4 4 Body materials Actuator material Seal material Media Viscosity. Control medium Port connections
/-way Diaphragm Valve with plastic body, pneumatically operated, 1/ 3 with true union 3 with fl ange pplications with aggressive media Flow optimised body with zero dead volume Self draining installation
Diaphragm valve, Plastic
Diaphragm valve, Plastic Construction The GEMÜ manually operated 2/2-way diaphragm valve has a low maintenance plastic bonnet. An optical position indicator is integrated as standard. Features Suitable
Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm
WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB
E Series (outdoor, stepped insert) Part Numbering system...94 Metal Housing models...95 Watertight or vacuumtight models...101
PREIINARY VERSION NOVEBER 07 unipoe & utipoe connectors EO unipoe and mutipoe connectors This cataogue gives the compete description of EO unipoe and mutipoe type connectors. The EO manufacturing programme
Temperature regulator Temperature regulator DN
Temperature regulator Temperature regulator DN 15-100 Fig. 771 ARI-TEMPTROL Thermal closing valve straight through with flanges Fig. 771 Fig. 772 Page 2 Fig. 773 ARI-TEMPTROL LCG Thermal closing valve
Machine glass thermometers Model 32, V-Form
Prodaja in zastopa: Materm d.o.o. Morje, morska cesta 6, 2313 Fram tel: 02 60 8 90 10, www.materm.si Mechanical temperature measurement Machine glass thermometers Model 32, V-Form WIKA data sheet TM 32.02
Shunt wires SHUNT WIRE (JA type)
SHUN WIRE (JA type) 2-ød in-plated in-plated 1 1 art No. JA 1- JA 2- JA - JA 4- JA 5- JA 6- JA 7- JA 8- JA 9- JA 10- JA 11- JA 12- JA 1- JA 14- JA-2501 JA-2502 JA-250 JA-2504 Dimensions ød B 1
VALVE FEATURES AVAILABLE MODELS LIMITS OF USE IP 67
VALVE FEATURES The resilient seat gate valve type is dedicated to the shut off of clear water and sewage water pipes. The motorization with the REGADA actuator allows the automation and the remote control
Pressure relief controller for oil V22D28 (PN 16, 25)
Data sheet Pressure relief controller for oil V22D28 (PN 16, 25) Description The controller has a control valve, an actuator with one control diaphragm and a spring for pressure setting. Features: - safe
PTC, NTC, Pt100 (special designs of all sensors on request) +15K +5K T [ C]
![PTC, NTC, Pt100 (special designs of all sensors on request) +15K +5K T [ C]](/thumbs/80/82009258.jpg "PTC, NTC, Pt100 (special designs of all sensors on request) +15K +5K T [ C]")
[kw] 100 Application: PTC, NTC and Pt100 sensors are used for measuring the temperature of machines and installations. Due to the con- structive design the thermal response times is short and the sensors
611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
Diesel engine dial thermometers
Diesel engine dial thermometers Local reading dial thermometers This range of instruments includes special precision dial thermometers optimised for marine engines, based on the nitrogen gas expansion