FSS-SYSTEM I ROD ø15 WEIGHT 300 gr/m1. ALWAYS CONNECT BOTH TRACKS WITH THE DRIVING SHAFT / LENGHT CLEAR WIDTH -10 cm CLEAR WIDTH

Transcription

1 FSS-SYSTEM I ROD ø15 WEIGHT 300 gr/m1 LER WIDTH FRI / LER WIDTH -6 cm ERING OVER LID NO SPRING TENSION IN MSTERRRIER ROD / LER WIDTH - PGE 1 LWYS ONNET OTH TRKS WITH THE DRIVING SHFT / LENGHT LER WIDTH -10 cm FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V

2 FSS-SYSTEM I STK HEIGTH FRI POKETS ø21mm 2,5 cm FRI VELRO 2cm FRI VELRO 2cm PGE 2 FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V

3 FSS-SYSTEM I SPLIT STK VELRO 2cm FRI alculation example for rods repeat and stack heights for SPLIT stack Example system length = 540 cm Stack = split stack Requested rod repeat = 40 cm Pocket diameter = 2.1 cm 5,5 cm Number of rods = System length - 5,5 cm / rod repeat = (540-5,5) / 40 = 13,36 pcs Rounded to even full numbers = 14 rods / 2 = 7 rods for every stack + 1 rod for mastercarrier one side ccurate rod repeat '' = 534,5 cm / 14 = 38,2 cm For mastercarrier side Stack + Stack height = rods repeat / 2 + 2,5 cm system height + 1/2 pocket diameter = 38,2 cm / cm + 1 cm = 22,6 cm SINGLE STK VELRO 2cm STK HEIGHT FOR MSTERRRIER VELRO 2 cm alculation example for rods repeat and stack heights for SINGLE stack Example system length = 540 cm Stack = single stack Requested rod repeat = 40 cm Pocket diameter = 2.1 cm PGE 3 Number of rods = System length - / rod repeat = (540-9) / 40 = 13,3 pcs Rounded to full numbers = 13 rods ccurate rod repeat '' = 531 cm / 13 = 40,8 cm For mastercarrier + Stack height = rods repeat / 2 + 2,5 cm system height + 1/2 pocket diameter = 40,8 cm / cm + 1 cm = 23, FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V

4 FSS-SYSTEM II ROD ø15 WEIGHT 300 gr/m ROD ø8 WEIGHT 100 gr/m1 LER WIDTH FRI / LER WIDTH -1 cm OVER LID ERING NO SPRING TENSION IN MSTERRRIER ROD 8mm / LER WIDTH - 1 cm PGE 4 LWYS ONNET OTH TRKS WITH THE DRIVING SHFT / LENGTH LER WIDTH -10 cm ROD 15mm / LER WIDTH - FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V

5 FSS-SYSTEM II STK HEIGTH 4,5 cm FRI FRI POKETS ø12 mm ROD 8mm VELRO 2 cm FRI VELRO 2cm PGE 5 FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V

6 FSS-SYSTEM II SPLIT STK VELRO 2 cm FRI 5,5 cm VELRO 2 cm alculation example for rods repeat and stack heights for SPLIT stack Example system length = 540 cm Stack = split stack Requested rod repeat = 40 cm Pocket diameter = 1,2 cm Number of rods = System length - 5,5 cm / rod repeat = (540-5,5) / 40 = 13,36 pcs Rounded to even full numbers = 14 rods / 2 = 7 rods for every stack + 1 rod for mastercarrier one side ccurate rod repeat '' = 534,5 cm / 14 = 38,2 cm For mastercarrier side Stack + STK HEIGHT Stack height = rods repeat / 2 + 4,5 cm system height + 1/2 pocket diameter = 38,2 cm / cm cm = 24,2 cm SINGLE STK FOR MSTERRRIER VELRO 2 cm alculation example for rods repeat and stack heights for SINGLE stack Example system length = 540 cm Stack = single stack Requested rod repeat = 40 cm Pocket diameter = 1.2 cm PGE 6 Number of rods = System length - / rod repeat = (540-9) / 40 = 13,3 pcs Rounded to full numbers = 13 rods ccurate rod repeat '' = 531 cm / 13 = 40,8 cm For mastercarrier + Stack height = rods repeat / 2 + 4,5 cm system height + 1/2 pocket diameter = 40,8 cm / cm + 0,6 cm = 25,5 cm FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V

7 FSS-SYSTEM III MTS TRK WEIGHT 500 gr/m1 LER WIDTH FRI / LER WIDTH -6 cm OVER LID TRK / LER WIDTH - ERING TRK / LER WIDTH - LWYS ONNET OTH TRKS WITH THE DRIVING SHFT / LENGHT LER WIDTH -10 cm PGE 7 FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V

8 FSS-SYSTEM III STK HEIGTH FRI POKETS ø12 mm FRI VELRO 2 cm ROD ø8 mm / LER WIDTH -6 cm 4,5 cm FRI MTS TRK WEIGHT 500 gr/m1 VELRO 2 cm PGE ROD ø8 WEIGHT 100 gr/m1 FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V

9 FSS-SYSTEM III FOR SPLIT STK first stack Y = - VELRO 2 cm 5,5 cm VELRO 2 cm alculation example for rods repeat and stack heights for SPLIT stack Example system length = 540 cm Stack = split stack Requested rod repeat = 40 cm Pocket diameter =1,2 cm Number of rods = System length - 5,5 cm / rod repeat = (540-5,5) / 40 = 13,36 pcs Rounded to even full numbers = 14 rods / 2 = 7 rods for every stack + 1 rod for mastercarrier both sides ccurate rod repeat '' = 534,5 cm / 14 = 38.2 cm For mastercarrier OVERLP side stack + For mastercarrier UNDERLP ( IF PPLIED) first stack Y=-9cm STK HEIGHT Stack height = rods repeat / 2 + 4,5 cm system height + 1/2 pocket diameter = 38,2 cm / 2 + 4,5 cm + 0,6 cm = 24,2 cm SINGLE STK alculation example for rods repeat and stack heights for SINGLE stack VELRO 2 cm PGE 9 Example system length = 540 cm Stack = single stack Requested rod repeat = 40 cm Pocket diameter = 1,2 cm Number of rods = System length - / rod repeat = (540-9) / 40 = 13,3 pcs Rounded to full numbers = 13 rods + 1 rod for mastercarrier ccurate rod repeat '' = 531 cm / 13 = 40,8 cm For mastercarrier + Stack height = rods repeat / 2 + 4,5 cm system height + 1/2 pocket diameter = 40,8 cm / 2 + 4,5 cm + 0,6 cm = 25,5 cm FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V

10 FSS-SYSTEM IV LER WIDTH ROD ø8 WEIGHT 100 gr/m MTS TRK WEIGHT 500 gr/m1 ERING OVER LID LWYS ONNET OTH TRKS WITH THE DRIVING SHFT / LENGHT LER WITH -10 cm ROD ø 8 mm / LER WIDTH -1 cm FRI / LER WIDTH -1 cm PGE 10 FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V

11 FSS-SYSTEM IV STK HEIGTH FRI POKETS 12 mm FRI VELRO 2 cm 4,5 cm FRI MTS TRK WEIGHT 500 gr/m1 VELRO 2 cm PGE ROD ø8 WEIGHT 100 gr/m1 FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V

12 FSS-SYSTEM IV FOR SPLIT STK first stack Y = - VELRO 2 cm 5,5 cm VELRO 2 cm alculation example for rods repeat and stack heights for SPLIT stack Example system length = 540 cm Stack = split stack Requested rod repeat = 40 cm Pocket diameter =1,2 cm Number of rods = System length - 5,5 cm / rod repeat = (540-5,5) / 40 = 13,36 pcs Rounded to even full numbers = 14 rods / 2 = 7 rods for every stack + 1 rod for mastercarrier both sides ccurate rod repeat '' = 534,5 cm / 14 = 38,2 cm For mastercarrier OVERLP side stack + For mastercarrier UNDERLP (IF PPLIED) first stack Y=-9cm Stack height = rods repeat / 2 + 4,5 cm system height + 1/2 pocket diameter = 38,2 cm / 2 + 4,5 cm + 0,6 cm = 24,2 cm SINGLE STK STK HEIGHT VELRO 2 cm alculation example for rods repeat and stack heights for SINGLE stack Example system length = 540 cm Stack = single stack Requested rod repeat = 40 cm Pocket diameter = 1,2 cm PGE 12 Number of rods = System length - / rod repeat = (540-9) / 40 = 13,3 pcs Rounded to full numbers = 13 rods ccurate rod repeat '' = 531 cm / 13 = 40,8 cm For mastercarrier + Stack height = rods repeat / 2 + 4,5 cm system height + 1/2 pocket diameter = 40,8 cm / 2 + 4,5 cm + 0,6 cm = 25,5 cm FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V

13 FSS-SYSTEM SSEMLY FMS TRK SPLIT STK for SYSTEM I and II MIDDLE 77,50 SLIDE THE MSTERRRIER TO THE MIDDLE OF THE ND DJUST OTH ELTONNETORS IN THE MIDDLE DO NOT UT THIS ONNETOR ONNET ELT IN MSTERRRIER ELT IS RUNNING TROUGH UTTED ONNETOR UTTED ONNETOR UT HERE (ONLY FOR SYSTEM I ND II) PGE 13 MKE WIDER FOR RRIER FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V

14 FSS-SYSTEM SSEMLY FMS TRK SPLIT STK for SYSTEM III and IV MIDDLE IF MSTERRRIER UNDERLP IS PPLIED-PRESS TO FI SLIDE THE MSTERRRIER TO THE MIDDLE OF THE ND DJUST OTH ELTONNETORS IN THE MIDDLE FIED PGE 14 LWYS UT HERE ORIGINL FOR MSTERRRIER OVERLP ONLY IF MSTERRRIER UNDERLP IS PPLIED-UT LEGS FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V

15 Forest Skylight Systems For the assembly of SINGLE STK and SPLIT STK Skylight System The dimension for the cuttings and calculation for the number of rods are described on the technical drawing. 1 ssemble the FMS tracks. The 2 tracks for a Skylight System should be assembled in MIRROR IMGE. 2 Put the FSS lick arriers in the right quantity in both tracks. 3 Put the Shuttle motors on the track and set the limits, with one motor you have to change the direction of the motor. (see Manual) 4 Make sure that both mastercarriers are in exactly the same position on the tracks. 5 onnect both motors with the tandem cable in port 2 of the motors. The motor who is not changed in direction is the Master motor. Now follow the directions in the Manual. (motor setup tandem) 6 onnect the receiver to the master motor in port 1 and connect with the remote. (See Manual) 7 Test if both track run synchronous, If not disconnect the slave motor from the track and put the mastercarrier in the right position. 8 Disable touch control on the master motor, the slave is than also automatically without touch control. (See Manual) 9 If you now want to disconnect the motors for transport, you have to mark the track and mastercarriers, so that you always keep the same position that you have set. 10 When it is necessary to mount the "Motor over Profile" first, than you have to mount the track together with the motors. If not you can first mount the track and than put the motor on the marked position. 11 LWYS connect both tracks with the drivingshaft in the returnpulley's PGE 15 FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V

16 FSS-SYSTEM DT SHEET SYSTEM I-II-III-IV FSS SYSTEM I and II FSS SYSTEM III and IV TOTL WEIGHT INLUDES LEEN PROFILES ND FRIS MTS TRK 500 gr/m ROD 15mm 300 gr/m ROD 8mm 100 gr/m1 M 14m M 14m FSS SYSTEM I-II-III-IV FSS SYSTEM I and II SHUTTLE SINGLE SHUTTLE TNDEM 35 kg 50 kg M 2,2m M 3,2m kg 25 kg 45 7 kg 10 kg FSS SYSTEM I and II FSS SYSTEM III and IV M 7m M 7m 90 4 kg 7 kg M 2,2m M 3,2m PGE 16 FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V

17 FSS-SYSTEM PRTS OVERVIEW SYSTEM I-II-III-IV WEIGHT 500 gr/m WEIGHT 100 gr/m WEIGHT 300 gr/m WEIGHT 100 gr/m PGE 17 FOREST GROUP NED. V rnsbergstraat 4 FOREST GROUP NEDERLND V