ArkZip 65/435. ArkZip 65/400. ArkZip 50/460. ArkZip 50/430 ARK PROFILES LIMITED. Halters positioned at every Zip seam location
|
|
|
- Louise Patrick
- 5 years ago
- Views:
Transcription
1 43 6 rkzip 6/ Halters positioned at every Zip seam location 6 rkzip 6/ rkzip 0/ rkzip 0/430 09/07/1 GENERL UPDTES 4 08/07/201 rkzip Profiles DTE SCLE 4 DL/C Z0
2 /00/200 Roof Profile Polyband airseal to sidelaps 32/00/200 Roof Profile Side Lap 09/07/1 GENERL UPDTES DTE 4 08/07/201 rkliner Profile SCLE 4 DL/C Z1
3 ZIP HLTER BRCKET SHGRID SPCER SYSTEM TRIBR SPCER SYSTEM TOPHT SPCER RIDGE SUPPORT SECTION EVES NGLE RIDGE SHROUD QUILT INSULTION COUSTIC INSULTION COUSTIC BTTS FILLER BLOCK VERGE HOOK VERGE CHNNEL VERGE TEE RIDGE SHROUD RETINER/SUPPORT HOOK/CHNNEL/TEE VERGE CONFIGURTION COMMONLY USED FIXINGS 09/07/1 GENERL UPDTES 4 08/07/201 rkzip ccessories DTE SCLE 4 DL/C Z2
4 7 8 9 Falls LTD'S 'ZIP' STNDING SEM TOPSHEET 2. LTD'S HLTER BRCKETS ON 1mm THICK EPDM THERML PDS 3. CVITY BR ND BRCKET SYSTEM 4. PROFILED FILLER BLOCK BEDDED ON SELNT. RIDGE SHROUD 6. FILLER RETINER EXTRUSION in 3m/l 7. PEX FLSHING IN 3m/l 8. mm WIDE LOOSE INTERNL BUTT STRPS WITH 4 RUNS BUTYL MSTIC SELNT 9. RIVET BUTT STRP ON ONE SIDE ONLY (FCTORY BONDED BUTT STRP PREFERBLE). RIVET T 400mm CTRS INTO RIDGE RETINER, DJCENT TO RIB 11. RIVETS T 400mm CTRS INTO RIBS DTE 4 08/07/201 L Ridge Installation - Butt-Strap To Joints - SCLE 4 DL/C Z3
5 ~ Falls No fixings through lap LTD'S 'ZIP' STNDING SEM TOPSHEET 2. LTD'S HLTER BRCKETS ON 1mm THICK EPDM THERML PDS 3. CVITY BR ND BRCKET SYSTEM 4. PROFILED FILLER BLOCK BEDDED ON SELNT. RIDGE SHROUD 6. FILLER RETINER EXTRUSION in 3m/l 7. PEX FLSHING IN 3m/l 8. mm WIDE FLSHING END LP WITH 2 RUNS BUTYL MSTIC SELNT 9. RIVET T 400mm CTRS INTO RIDGE RETINER, DJCENT TO RIB. RIVETS T 400mm CTRS INTO RIBS DTE 4 08/07/201 L Ridge Installation - Lapped Joints - SCLE 4 DL/C Z4
6 Falls LTD'S 'ZIP' STNDING SEM TOPSHEET 2. LTD'S HLTER BRCKETS ON 1mm THICK EPDM THERML PDS 3. CVITY BR ND BRCKET SYSTEM 4. VERGE CHNNEL IN 3m/l OVER RIB OF ZIP SHEET (1). FIX VERGE CHNNEL (4) INTO ZIP SHEET (1) WITH LUMINIUM RIVETS T 00mm CTRS 6. VERGE HOOK FIXED OVER VERGE CHNNEL (4) ND SCREW-FIXED TO STEM OF HLTER (2) 7. VERGE TEE IN 3m/l SNP-FIXED OVER VERGE HOOKS (6) 8. VERGE FLSHING IN 3m/l 9. mm WIDE LOOSE INTERNL BUTT STRPS WITH 4 RUNS BUTYL MSTIC SELNT. RIVET BUTT STRP ON ONE SIDE ONLY (FCTORY BONDED BUTT STRP PREFERBLE) 11. RIVET T 00mm CTRS INTO VERGE TEE (7) DTE 4 08/07/201 L Verge Installation - Butt Strap Joints - SCLE 4 DL/C Z
7 ~ Falls No fixings through lap LTD'S 'ZIP' STNDING SEM TOPSHEET 2. LTD'S HLTER BRCKETS ON 1mm THICK EPDM THERML PDS 3. CVITY BR ND BRCKET SYSTEM 4. VERGE CHNNEL IN 3m/l OVER RIB OF ZIP SHEET (1). FIX VERGE CHNNEL (4) INTO ZIP SHEET SEM T (1) WITH LUMINIUM RIVETS T 00mm CTRS 6. VERGE HOOK FIXED OVER VERGE CHNNEL (4) ND SCREW-FIXED TO STEM OF HLTER (2) 7. VERGE TEE IN 3m/l SNP-FIXED OVER VERGE HOOKS (6) 8. VERGE FLSHING IN 3m/l 9. mm WIDE FLSHING END LP WITH 2 RUNS BUTYL MSTIC SELNT. RIVETS T 00mm CTRS INTO VERGE TEE (7) VOIDING LP TO LLOW FOR EXPNSION DTE 4 08/07/201 L Verge Installation - Lapped Joints - SCLE 4 DL/C Z6
8 L1 L1 L2 L2 X 2 X gap between eaves angle and flashing 1.2xLmm, min 20mm SECTION X - X 1. LTD'S 'ZIP' STNDING SEM TOPSHEET mm THICK LUMINIUM EVES STIFFENER NGLE 3. EVES STIFFENER NGLE (2) FIXES TO ZIP SHEET (1) WITH LUMINIUM RIVETS EITHER SIDE OF SEMS DTE 4 08/07/201 L Eaves Installation - Drip ngle - SCLE 4 DL/C Z7
9 Fastener Pattern for : End Laps, Ridge and Eaves purlins. Fix through each trough, min 1mm diameter washers: No. fasteners per panel Fastener Pattern for : Intermediate purlin locations. Fix each side of sidelap and mid sheet, min 1mm diameter washers: 3No. fasteners per panel, DTE 4 08/07/201 rkliner Installation - Fixing Positions - SCLE 4 DL/C Z8
Bracket U Value at 1.5M Centres. 265mm 275mm 295mm 300mm 315mm 335mm 355mm mm.
Bracket Typically @ 1200 ELITE SYSTEMS 402 Top Sheet set out typically for straight sheets * Varies - See Table 39 75 Varies - See Table 32 Bracket Height 100mm 150mm 160mm 180mm 185mm 200mm 220mm Halter
HOESCH FLASHINGS AND ACCESSOIRES SOUTH TECHNICAL INFORMATION. GermanEngineered
HOESCH FLSHINGS ND CCESSOIRES SOUTH TECHNICL INFORMTION GermanEngineered Contents Roof and wall connections 6 General..............................................................6 Hoesch isodach mono
Refresh Roof Composite Panel Existing with Trapezoidal Outer Sheet
COVERWIDTH 1000 www.euroclad.com Refresh Roof Composite Panel Existing with Trapezoidal Outer Sheet Bracket Height Continuous Tophat Height Insulation Thickness* Insulation Value U Value at 1.5M Centres
OV-1 STANDING SEAM OVERVIEW. Temple Architectural Products 638 Moore Rd Avon Lake, OH 44012
STANDING SEAM OVERVIEW SW-2 CB-2 CB-1 R-1 RK-1 V-1 SW-1 RK-1 H-1 VR-1 P-1 HW-1 PB-1 DE-2 DE-1 RK-3 DE-2 SP-1 OV-1 DRIP EDGE - 1 6" WIDE HIGH TEMP UNDERLAYMENT STRIP PRE-NOTCHED PANEL END STANDING SEAM
RESIDENTIAL PRODUCTS DIRECTORY
RESIDENTIL PRODUCTS DIRECTORY CONTENTS GUTTER ND CCESSORIES 4 19 ROLL VLLEY ND FLSHING 20 24 FLT SHEETS 25 FORMED VLLEY 25 26 KICK-OUT FLSHING 27 WLL TIES 27 FLSHING SHINGLES 28 ROOF EDGE, DRIP EDGE ND
WARNING: IF THERE ARE ANY DISCREPANCIES BETWEEN THE CAD FILE AND THE DRAWING, THE DRAWING WILL TAKE PRECEDENCE. IF IN DOUBT, ASK.
28.48 DJUSTLE 5.64 19.78 DJUSTLE D 8 7 6 5 4 3 2 1 20.37 WRNING: IF THERE RE NY DISCREPNCIES ETWEEN THE CD FILE ND THE DRWING, THE DRWING WILL TKE PRECEDENCE. IF IN DOUT, SK. D 51.80 48.00 9.57 C C 18.00
SECTION A-A
40.08 D 8 6 5 4 3 2 1 WRNING: IF THERE RE NY DISCREPNCIES ETWEEN THE CD FILE ND THE DRWING, THE DRWING WILL TKE PRECEDENCE. IF IN DOUT, SK. D C 51.1 48 20.25 18 C 23.68 15.12 NOTE: DRWER UNIT NOT INCLUDED,
MIRAGE. Panel Options: Details: Notes: Mirage. Mirage Test Data. Section Properties or Load Tables. - Panel width: 16 - Panel configurations: ribbed
MIRAGE Mirage Panel 8 8 1 16 Coverage Mirage Mirage Test Data. Section Properties or Load Tables For any available Testing Data, Section Properties, or Load Tables, please visit www.mcelroymetal.com. For
Installation Instruction
CIVCON MNIFOLD INSTLLTION MNUL REVISION 5/9/05 PETROLEUM MNIFOLD for TNK TRUCKS Installation Instruction Unit of Knappco, Inc. Phone: 86-74-6600 Fax: 86-74-06 CIVCON MNIFOLD INSTLLTION MNUL REVISION 5/9/05
Beam Clamps. Materials & Finishes (Unless otherwise
Beam Clamps Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports
AR68.30-P-1770QA Remove/install headliner of soft top
AR68.30-P-1770QA Remove/install headliner of soft top 20.10.2014 1 2 Inner headliner 3 Rubber lip 4 Soft top catch mounting plate 5 Rubber lip 6 Roof bow P68.30-2729-06 P68.30-2959-09 7 10 Roof bow 13
SIDE VIEW-1 REAR VIEW MODEL OF THE HIGH PRESSURE DREDGER ENGINE OF RICHARD TREVITHICK OF 1806 JDWDS JULY-2016 SHEET: 01 OF 09
0. NOTES: THE ORIGINL DRWINGS WERE GIVEN TO ME. THE RTICLE ND DRWINGS WERE PUBLISHED IN THE "MODEL ENGINEER" MGZINE OF SEPTEMBER. THE DESIGN ND BUILT WS BY TUBL CIN.. RER VIEW ENGINE OF RICHRD TREVITHICK
FischerPANEEL. * An enterprise of Tata Steel
5 30 50 00 FischerPANEEL * An enterprise of Tata Steel FischerPANEEL Economical with versatile design possibilities FischerPANEELE are functional building elements for industrial, office and administrative
NM-NP Pajero Rhino Heavy Duty - Two Bar Trackmount System
NM-NP Pajero Rhino Heavy Duty - Two Bar Trackmount System Parts List Important: Please read these instructions carefully prior to installation. Please refer to your fitting instruction to ensure that the
FREEDOM3 Portable Restroom Assembly Instructions
FREEDOM3 Portable Restroom Assembly Instructions PN 21337 REV M - 1-1-19-17 FREEDOM 3 ASSEMBLY INSTRUCTIONS PN 21337 REV M -2-1-19-17 PARTS LIST: PN 21337 REV M - 3-1-19-17 INTRODUCTION Satellite portable
CONSTRUCTION NO. NEW STREET, HOUSE, ADDRESS ASHFIELD ROAD, NORTON, IP31 3ND DINING 05 UTILITY 04 STUDY 03 SITTING ROOM HALLWAY WC 07 KITCHEN 06
9725 5235 453 D 6697 2362 Floor vent SITTING ROOM 28 70 60 52 9 450 788 D W D Wter 3639 0 2441 0softner 31 ID Y SPEILIST ID STUDY 2474 1 OILER RD ID G w/m t/d N HLLWY Y SPEILIST ID ID 0 W UTILITY W 664
Pressure Sensitive Seam Tape Features 30.5m long rolls or sold by the metre (can be sold by 10th of metre). Must be used with an EPDM primer.
3 inch tape (75mm) Pressure Sensitive Seam Tape PS Seam Tape manufactured to precise width and thickness criteria with a clear poly backing for easier on site application. This Seam tape offers over 30%
C12. Grounding / Isolation / Electrical. Note: XX= finish code. DUPLEX AC OUTLET ASSEMBLY NETBAY AC OUTLET STRIP / BLANK STRIP.
Grounding / Isolation / Electrical DUPLEX C OUTLET SSEMBLY Phone: (99) 575- Fax: (99) 575-708 Modified:09/9/0 Part Number 0000xx 8 5 7 front bracket rear bracket outlet box outlet box cover 5 duplex receptacle
NM-NP Pajero Rhino Heavy Duty - Two Bar Trackmount System
NM-NP Pajero Rhino Heavy Duty - Two Bar Trackmount System Parts List Important: Care Instruction: Clean vehicle roof prior to fi tting Rhino Heavy Duty roof racks. Tools Required: Pneumatic or concertina
ALEX-250 BOX SET INSULATION SECTOR BOX ALEX-250
TEHNIL SPEIFITIONS LEX-250 BOX SET DTE 29/03/2016 PGE 1/2 (2:1) 027386 UPPER / OPENING PRO- FILE LUMINIUM LEX-250 026082 RUBBER LIPPING 027383 EXTERIOR LEVELNESS PROFILE LUMINIUM BOX LEX-250 026015 BRUSH
Type 4X Panel Enclosures
Ground-Mount Enclosures Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing
METAL BUILDING AND STANDING SEAM COMPONENTS
METAL BUILDING AND STANDING SEAM COMPONENTS COMMERCIAL AND INDUSTRIAL KENTUCKY ILLINOIS 925 Rolling Hills Ln. 1181 S.R. 121 Winchester, KY 40391 Mt. Zion, IL 62549 TEL: 859-744-4475 TEL: 217-864-5835 FAX:
FORD EXPLORER. (2010 Production Onwards) INTEGRATED SIDE STEP INSTALLATION INSTRUCTION. 60 Minutes. 13mm and 17mm Socket
FORD EXPLORER (010 Production Onwards) INTEGRTED SIDE STEP INSTLLTION INSTRUCTION ccessory Part No. STEP0011 60 Minutes pprox Product Weight: 15kg/33 lbs IMPORTNT - PLESE RED INSTRUCTIONS BEFORE COMMENCING
HOT RUNNER MANIFOLD SYSTEMS HOT RUNER MANIFOLD SYSTEMS
HOT RUNNER MNIFOLD SSTEMS HOT RUNER MNIFOLD SSTEMS ENGINEERED FOR SUPERIOR PERFORMNCE SPECIFICTIONS: 5 Material - ISI OHT or ISI OSS Hardness - 3-36 RC Melt Passage Ø -.50",.350",.500" as required * 6
SEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS
R DIEBOLD 00 LOBBY CSH RECYCLER- RER LOD L2 CLL -0--600 64 SFE (2 6 ") 40mm ( 6") CEN I SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH
4000D-X DRY VAN SERIES
4000D-X DRY VAN SERIES THE WORLD S LEADING PRODUCER OF STRONG, LIGHTWEIGHT TRAILERS. KEEPING LOADS SAFE AND DRY FOR GENERATIONS When brothers E.W. and H.C. Bennett founded Utility Trailer Manufacturing
TJ/LJ Bowless Top. Components. 1. Soft Top (1) 2. Foam Supports (2) 3. Whisper Bars (2)
Page 1/5 Components 1. Soft Top (1) 2. Foam Supports (2) 3. Whisper Bars (2) Extra Parts Needed: Rugged Ridge Windshield Channel (13308.04) Tailgate Bar (if no OE Tailgate Bar) Installation of the top
HOT RUNNER MANIFOLD SYSTEMS
HOT RUNNER MNIFOLD SSTEMS -in-line Balanced H Standard Integral Low Profile Large Bore Block 6 Block - H-H Dedicated To our Success HOT RUNNER MNIFOLD SSTEMS INTEGRL ENGINEERED FOR SUPERIOR PERFORMNCE
ACCESSORIES AND FLASHINGS
CCESSORIES ND FLSHINGS FOR SNDWICH PNELS TECHNICL CTLOGUE www.balex.eu CCESSORIES and FLSHINGS for sandwich panels January 2011 The content of this folder does not constitute a commercial offer in the
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS R5 STEP BOARD APPLICATION: 2007-2017 Chevrolet Silverado / GMC Sierra Extended / Double / Crew Cab AUTOMOTIVE PRODUCTS, PART NUMBER: 28-51020, 28-51025, 28-51030, 28-51035 ITEM
A battery of 19 Rectangular Portal Culverts under a major road. Rectangular Portal Culvert used as an inclined mine shaft.
9 A bttery of 19 Rectngulr Portl Culverts under mjor rod. Rectngulr Portl Culvert used s n inclined mine shft. Rectngulr Portl Culverts with Spigot nd Socket Pipes. Rectngulr Portl Culvert with in-situ
UNEQUAL FLANGE RACK ACCESSORIES
CUSTOM CBINETS & RCKS Products for Custom Installation Solutions www.custcab.com UNEQUL FLNGE RCK CCESSORIES Custom Cabinets & Racks offers a large range of accessories to custom tailor UEF equipment racks
STANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES
L STNDRD ND FULL HEIGHT - RER LOD - WITH 0mm ( 6") "LL DIMENSIONS ND DESIGN CRITERI PGE OF 8 FRONT - STNDRD HEIGHT SEE PGES and FOR CS 00 STNDRD HEIGHT DETILS FRONT - FULL HEIGHT SEE PGES and FOR CS 00
SPARE - PARTS CATALOGUE KYMCO 500I, 700I SE
SPARE - PARTS CATALOGUE KYMCO 500I, 700I SE. CAB PREVIEW 2 3 Position Catalogue no. Description Qty 1 58S01U01S30 ROOF 1 2 58S01U01S21 REAR PANEL 1 3 58S01U01S40 LEFT DOOR 1 4 58S01U01S10 FRONT PANEL 1
Coating over Metal Roof: 10-Year System
Coating over Metal Roof: 10-Year System Materials Needed: Product Application Rate Application Calculator Acrylic Clear Base, Roof & Tile Primer, or Black Primer Corrugated, Standing Seam, & R-Panel 1
PIPE SUPPORT SYSTEMS CATALOGUE
PIPE SUPPORT SYSTEMS CTLOGUE www.caddyindustrial.com.au 2 Phone: 08 6278 7500 Contents 1 Pipe Supports Insulated Pipe Clamps ZP & SS... Page 1-2 Stabil Pipe Clamps...Page 3 Channel Clips & Hydrosorbs...Page
[1200mm] 5" [125 mm] 2 3/4" [70mm] [2600mm] [450mm]
![[1200mm] 5 [125 mm] 2 3/4 [70mm] [2600mm] [450mm]](/thumbs/89/98551867.jpg "[1200mm] 5 [125 mm] 2 3/4 [70mm] [2600mm] [450mm]")
MIN 9'-10 1/2" [3010mm] 9'- CR 8'-6"MIN [2825mm] 6'-0" 12" S [2550mm] CR [1800mm] ON SIDE PLN "" 8'-8" CR 2 [2600mm] 6'-0" CR [1800mm] 2 FRONT ND RER S [55mm] 8'-6" [2550mm] [55mm] [125 mm] 2 [70mm] 6
Type 4 X Panel Enclosures
Ground-Mount s Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing out frames
product group 8 Front forks & bearing housings
product group 8 Front forks & bearing housings ONTENT FRONT FORKS...196 Front forks - aluminium...196 Front forks - steel...198 Front forks - plastic...199 ERING HOUSINGS...200 earing housings...200 Parts
SIDE DETAIL ELEVATION DETAIL JCM VIVA VISIO SYSTEM PRODUCT DATA -
* UCP REQUIRED IF SYSTEM DOES NOT HVE HNDRIL OPTIONL CPS ) SS 'U' CP ) SS Ø" CP 3) SS Ø" LED CP ) Ø " OR Ø" SS HNDRIL ) Ø" WOOD HNDRIL CHERRY WOOD " GP (NOM) RED OK WHITE OK MPLE WOOD 3) Ø " LED iril 3'7"
Miscellaneous Fittings
B214 R&L REEL RCK SUPPORT FOR (32) PIPE 200 Lbs. (90.7 kg) B514 R&L REEL RCK SUPPORT FOR 2 (50) PIPE 246 Lbs. (111.6 kg) 3 5 /8 (92.1) 3 5 /8 (92.1) B214R Right Hand B214L Left Hand B514R Right Hand B514L
L.A. METALS LTD. Aluminium Stockholder THE SERVICES WE OFFER
TENTH EDITION L.. METLS LIMITED L.. METLS LTD. luminium Stockholder THE SERVICES WE OFFER DELIVERY Same/Following day delivery by our own transport. FBRICTION Including drilling, countersinking and pressings.
PRODUCTS FOR PV SOLAR MOUNTING APPLICATIONS ROOF MOUNT SYSTEMS...3. GROUND and pole MOUNT SYSTEMS...5. L Feet...9. Corrugated/IBR Roof Mounts...
S 1 Index PRODUCTS FOR PV SOLAR MOUNTING APPLICATIONS ROOF MOUNT SYSTEMS...3 GROUND and pole MOUNT SYSTEMS...5 Power Rail Module Mounting System...6 Power Rail Extrusions...7 Power Rail Commercial Extrusions...7
besseges Handrail Catalogue VALVES TUBES FITTINGS
Handrail Catalogue Accounts: 0161 343 4509 Fax: 0161 339 0307 Email: sales@-vtf.co.uk Website: www.-vtf.co.uk Handrail Applications FastClamp is the safe and simple solution to build many different types
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS R5 MODULAR WHEEL TO WHEEL NERF STEP BARS APPLICATION: 2007-2019 Chevy Silverado / GMC Sierra 2500-3500 Crew Cab (8ft. Bed) Excl. Dually PART NUMBER: 28-534580, 28-534585 ITEM
SD3-60 STRUCTURAL REPAIR MANUAL STABILIZER (FIN) - STRUCTURAL IDENTIFICATION
SRM 12.0.0.0VERTICAL STABILIZER (FIN) STRUCTURAL IDENTIFICATION 1. General This section identifies the skin panels and structural components of the vertical stabilier. Details are given of specific location;
Electrical Accessories
complete system of top quality, time saving products, designed for surface metal raceways, lighting and cable supports. Innovative designs offer many installation advantages. -Line s surface raceways are
RTS518 - Rhino Heavy Duty 2 & 3 Crossbar System Hyundai iload, imax, i800, H-1.
RTS518 - Rhino Heavy Duty 2 & 3 Crossbar System Hyundai iload, imax, i800, H-1. NOTE: Please read these instructions carefully prior to installation. Check the contents of kit before commencing fi tment
Gasfire Flue Kits. B Vent Gas Flue Kit - Metallic Black (galvanised)
Gasfire Flue Kits Product Description Part Number B Vent Gas Flue Kit - Metallic Black 588649 (galvanised) Geneva (Ultimate) This kit contains: Gas Cowl, Top Spider, Slip Liner 400mm, Outer Liner 1200mm,
CASEMENT - LARGE MISSILE IMPACT
CSEMENT - LRGE MISSILE IMPCT 1/4" MX. O.. FLNGE WIDTH 7" MX. UNIT WIDTH 6 1/4" MX. SSH WIDTH 1 /4" GLSS DLO GENERL NOTES: 1. THE PRODUCT SHOWN HEREIN IS DESIGNED ND MNUFCTURED TO COMPLY WITH THE FLORID
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS R5 STEP BOARD APPLICATION: 2007-2017 Chevrolet Silverado / GMC Sierra Extended / Double / Crew Cab AUTOMOTIVE PRODUCTS, PART NUMBER: 28-51020, 28-51025, 28-51030, 28-51035 ITEM
PANEL AND ACCESSORIES
PNEL ND CCESSORIES CONTENTS K-RI PROFILES 4 K-RI INTERIOR LINER PNELS 6 K-RI PERFORTED INTERIOR LINER PNELS 7 DRIPSTOP CONDENSTION CONTROL 7 LIMITED 40-YER WRRNTY 8 CONDITIONS OF SLE ND GENERL INFORMTION
Wildcat System Instructions
Wildcat System Instructions NOTE: Most steps contained in these instructions will need to be repeated on the other side of the vehicle. Prior to assembly of windshield it is necessary to establish what
The ideal solution. More light, more life.
The ideal solution. More light, more life. 1 CONTENTS Features, Perfect Comfort, Distinction Blades opening way, Patent 6 7 Pergola gava SL Pergola gava Introduction 5 Introduction 4 Configurations 8 Configurations
...2 Installation of light bracket. Extra Heavy Duty Ploy Blade 10
Table of Contents Heavy Duty Extra Long Poly Blade (Blade, Quadrant and A-frame) Extra Heavy Duty Ploy Blade 10...2 Installation of light bracket....8 Important note: Lift frames for this specific blade
SPARE - PARTS CATALOGUE YAMAHA VIKING YXM 700
SPARE - PARTS CATALOGUE YAMAHA VIKING YXM 700. CAB PREVIEW 2 3 Position Catalogue no. Description Qty 1 41S04U01S30 ROOF 1 2 41S04U01S20 REAR PANEL 1 3 41S04U01S40 LEFT DOOR 1 4 41S04U01S10 FRONT PANEL
Kark Residence Page 1 of 6
Kark Residence Page 1 of 6 Materials 1 2 2x12x16' SYP #2 Eave Blocking EA 2 --$$$-- $0.00 2 6 2x12x12' SYP #2 Header Girder 12' EA 6 --$$$-- $0.00 3 21 2x12x14' SYP #2 Header Girder 14' EA 21 --$$$-- $0.00
FREEDOM4. Portable Restroom Assembly Instructions
FREEDOM4 Portable Restroom Assembly Instructions 2530 Xenium Lane North, Minneapolis, MN 55441 Telephone: 763-553-1900 Fax: 763-553-1905 800-328-3332 / www.satelliteindustries.com 9/18 REVD 22541 INSTRUCTION,
190' - 11" NEW BSMT 2' - 0" 7' - 8 1/2" 8' - 0" 7' - 4" 5' - 5 1/4" 1/4" = 1'-0" and corner boards is smooth, sanded fir or cedar material on 3 sides
' - /" ' - /" 08' - /" 00' - /" ' - " 0' - " a ' - 0 /" 0' - /" /" /" 0 0 0 /" 00 ' - " EXG & PROP FG 0' - /" ' - 8 /" ' - /" E 8 ' - " EXG & PROP FG ' - " ' - /" 0' - /" ' - 0 /" E E 0 ' - /" /" /" '
PRIUS Motor driven diaphragm metering pump
Motor-driven diaphragm dosing pump, mechanical actuated, PRIUS combines efficiency and chemical resistance to a wide capacity range for an extensive number of applications. Single or three phase motor
DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY CEN I, CEN III GS, CEN IV GS or CEN IV GS EX SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL
Product and Price Guide
Dektite Product and Price Guide Easy to Work With www.deks.co.uk sales@deks.co.uk 01275 858866 Flashings for Metal Roofs Dektite Original The Original watertight Flashing for Metal Roofs The original watertight
INSTALLATION INSTRUCTIONS
AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS HDX DROP STEP WTW APPLICATION: 2007-2017 Chevy Silverado / GM Sierra / 1500-2500-3500 Ext. / Double / Crew Cab - 6.5 Ft Bed PART NUMBER: 56-534575, 56-534595,
Butt Fusion up to 114mm
Butt Fusion up to 114mm Procedure Overview This standard describes the procedures for butt fusion of PE pipe up to 114.3 mm outer diameter using the McElroy Pitt Bull No. 14 or similar machine. Topics
DRINK,COOL DOG WATER FOUNTAIN
DRINK, COOL WTER FOUNTIN Exclusive patent-pending decorative and functional features that hydrate, cool and keep dogs safe Standard heavy duty type 304 stainless steel 10 sched. 10 main column High polished
FL ATi RON STEEL FLASHING DETAILS 11/4 STUD PANEL (PBR) PANEL PROFILE. 36 Coverage
26 Gauge Trim Pamphlet.indd 1 5/8/12 5:05 PM FL ATi RON STEEL FLASHING DETAILS 11/ STUD PANEL (PBR) PANEL PROFILE 1¼ 12 36 Coverage All specifications are designed to be used with panel profile heights
ABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets
ABB industril drives Mechnicl instlltion instructions ACS880 multidrive cbinets List of relted mnuls Generl drive mnuls (in ll deliveries) Electricl plnning instructions for ACS880 multidrive cbinets nd
C400 (6 in.) GEAR OPERATED SQUEEZE-OFF TOOL FOR PE PIPE
1825 ECN1825 C400 (6 in.) GER OPERTED SQUEEZE-OFF TOOL FOR PE PIPE Squeezing Pipe Set the Gauge Plates (3) on each side of the tool to the specific pipe size and SDR value. (See Picture 3) Ensure the desired
Print This Page. Return To Index
PLASTI-BOND REDH2OT KNOCKOUT HUBS KNOCKOUT HUBS PRST2 PRSTG2 Knockout Hubs Specifictions Knockout Hubs Configurtions ST STG2 b c STTB STTTB d COMPLIANCES PLASTI-BOND REDH 2 OT ST style knockout hubs re
FOR THE PROCESSOR 40-SERIES GRAIN BINS PROVEN & DEPENDABLE
FOR THE PROCESSOR 40-SERIES GRAIN BINS PROVEN & DEPENDABLE WWW.GRAINSYSTEMS.COM Your Downtime is not an option. Your customers depend on you year-round when they need to move their grain from field to
RETAINING BLOCKS Reinforcing Steel R-5236HC 52" (1,320 mm) Hollow Core Retaining Block
RETAINING BLOCKS Reinforcing Steel R-5236HC 52" (1,320 mm) Hollow Core Retining Block A (Typ.) B (Typ.) 3D VIEW b 87 93 d d c A B BAR DIAGRAM BAR SCHEDULE DIMENSIONS BAR* b c d LENGTH/BAR NO. BARS TOTAL
RTS524 MITSUBISHI Challenger - Two Cross Bar Track Mount System - With or without roof rails -
RTS524 MITSUBISHI Challenger - Two Cross Bar Track Mount System - With or without roof rails - Important: Please read these instructions carefully prior to installation. Please refer to your fitting instruction
Mounting SySteMS ApplicAtionS overview version 1.2 March 2013
Mounting Systems Applications Overview Version 1.2 March 2013 tritec Mounting Systems: Applications Overview I. Pitched Roof: Roof-Top 1. Tiles, shingles and corrugated panels 1.1 TRI-STAND on tiles 1.1.1
Solar collector racking system CALEFFI NAS100 series ACCREDITED Function Product range NAS100 NAS100 NAS100 NAS100
Solar collector racking system NS100 series CCREITE ISO 9001 FM 21654 ISO 9001 No. 0003 CLEFFI 01281/14 N Replaces 01281/13 N The collectors must be mounted to two horizontal NS100 series four slot rails.
RTS510 Rhino Heavy Duty Track Mount System - MITSUBISHI TRITON MK
RTS510 Rhino Heavy Duty Track Mount System - MITSUBISHI TRITON MK Important: Please read these instructions carefully prior to installation. Please refer to your fi tting instruction to ensure that the
Roofs and Façades PRODUCT RANGE. FM 4880 for internal use. Cert. No. 650a to LPS 1208 Cert. No. 650b to LPS 1181:1 Cert. No. 650c to LPS 1181:2
Roofs and Façades PRODUCT RANGE FM 4880 for internal use Cert. No. 650a to LPS 1208 Cert. No. 650b to LPS 1181:1 Cert. No. 650c to LPS 1181:2 TRIMOTERM FTV FIREPROOF FAÇADE PANELS Trimoterm FTV 1200 EN
STAKE BODY Swing-Away Mount
STKE BODY Swing-way Mount for the Model 8160 Installation Instructions 720713 2006 Little Wonder, Inc. ll Rights Reserved. Table of Contents ssembly Instructions.......................2 Parts & Hardware
AR77.31-P-1001QA Remove/install soft top canvas MODEL 209.4
AR77.31-P-1001QA Remove/install soft top canvas 14.3.03 MODEL 209.4 1 Bolts 4 Soft top canvas 6 Rivet 2 Roof peak 5 Tension cable 49 Fabric tape 3 Rubber seal P77.31-2159-09 4 Soft top canvas 9 Zipper
DETAIL OF DUCT FABRICATION & SUPPORTS
DETIL OF DUT FRITION & SUPPORTS DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SEET DRWING No. IPSDR013 ST 1 FIG. SUGGESTED SIZING DUT SIZE mm (in) ND
Steel Framing Systems
Steel Framing Systems Total Cable Management Solutions BS-EN-ISO 9001:2000 QULITY MNGEMENT SYSTEM Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, ksai, Pramzone, BKKS office complex
INSTALLATION INSTRUCTIONS FOR DECK TUB SETS with HAND SHOWER Valves Numbered: &
INSTALLATION INSTRUCTIONS FOR DECK TUB SETS with HAND SHOWER Valves Numbered: 80001249 & 90001249 2222 Camden Court, Oak Brook, IL 60523 Telephone: 800-PHYLRICH Fax: 866-800-9774 www.phylrich.com Preparing
Chicago Metallic 200 Snap Grid 15/16
Part of The ROCKWOOL Group Chicago Metallic 200 Snap Grid 15/16 coustical ceiling suspension system Ideal for: Retail, classrooms, general interiors. Performance Properties: -Intermediate and heavy duty
UNIVERSAL ALUMINIUM CASE
UC SERIES UNIVERSAL ALUMINIUM CASE 3 2 4 Simple structure nd tough cse with extruded luminium covers. 36 sizes nd 3 different colors for totl of 108 different combintions re vilble. 2 or 3 grooves vilble
SHEET 1 OF 6
REVISIONS REV DESCRIPTION CHG.NO. PP'D DTE SENSOR WELD NECK MOUNTING FLNGE & WELD FTG. (FCTORY WELDED) VILBLE IN SME B16.5 RF & RTJ, ND EN 1092-1 RF. REFER TO TBLE 1 ON SHEET 2 OR FOR S ND DIMENSIONS NEW
CLAMP-CLOSED PIPE-STL BLK 1/2" (540) CLAMP-GROUNDING,PIPE CLAMP-CLOSED CLAMP-CLOSED
PIPE-STL LK /" 006-0-000 (700) 5598-0-0 SREW 000G-0- ELOW-STL, 90 DEG 0055-0-000 PIPE-STL LK /" 006-0-000 (50) ELOW-RSS-90,/FX/FPT 0070-0-000 LMP-GROUNDING,PIPE 0758-0-000 PIPE-STL LK /" 006-0-000 (805)
Distributed by: BEST MATERIALS Ph: , Fax:
Distributed by: BEST MATERIALS Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014 www.bestmaterials.com Email: Sales@BestMaterials.com Dektite Product Guide Flashings for Metal Roofs Dektite Original The
R-LOC TRIMS. Part Number Length. All angles are 90 or 45 unless otherwise noted. All trims are 26 gauge unless otherwise specified.
R-LOC TRIMS All angles are 90 or 45 unless otherwise noted. RAKE TRIM 150 105 105 RA102(color) RA122(color) RA142(color) RA162(color) RA182(color) RA204(color) 10'-2" 12'-2" 14'-2" 16'-2" 18'-2" 20'-4"
Product Installation Guide. Revised 8/25/14
Product Installation Guide Revised 8/25/14 POLYCARBONATE PANELS 29GA FLAT SHEETS WEATHEREDGE PANEL OPTIONS CLEAR PANELS WHITE PANELS FASTENERS (100 cnt bags) NON-VENTED S ROOF BOOTS FASTENER INSTALLATION
Ladders. Werner Ladders / Series Round Rung Extension & Single Ladder
Werner 7100-2/7100-1 Series Round Rung Extension & Single Ladder 7116-2* 16 -- 13 7120-2 20 -- 17 7124-2 24 -- 21 7128-2 28 -- 25 7108-1 -- 8 -- 7110-1 -- 10 -- 7112-1 -- 12 -- 7114-1 -- 14 -- 7116-1 --
TORNADO II, S, & SS FUSELAGE TRACKING
TORNADO II, S, & SS FUSELAGE TRACKING 92-INS-0176-C Nose Fork Assembly Instructions Approved 92-INS-0178-D Spindle and Brake Assembly Approved 92-INS-0181-F Anti Servo Control Assembly Approved 92-INS-0182-C
WATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL
SECTION 08316 WTERTIGHT IRTIGHT SPECIL CCESS DOORS & HTCHES, PRT 1 GENERL HIGHLIGHTED RES TO BE INSERTED BY SPECIFYING ENGINEER. 1.1 WORK OF THIS SECTION. THE WORK OF THIS SECTION INCLUDES PROVIDING LL
MNPV6 REV A DISCO 4X FINAL ASSY
NOTES 1) ITEM 2,USR, MUST HVE TWO END SCREWS REMOVED, SO THT ITEM, WHITE INSULTORS, CN E INSTLLED. 2) UNIT SHIPS WITH THE FOLLWING ECH LCK TWO WIRE STRIN RELIEFS, P/N 9--1 ECH LCK STRIN RELIEF NUTS, P/N
LIGHT-DUTY PUNCHING UNITS
LIGHT-DUTY PUNCHING UNITS For punching channel, angles, extrusions and flat stock up to 10 gauge UNITTOOL Punch & Die Company Inc. 20 Norris St. Buffalo, New York 14207 Phone: 1-716-873-8453 Fax: (USA
Installation. Storage. Tools
Contents Page Installation, Storage, Tools 2 Safety Tips, Maintenance, Important Notice... 3 Direction of Application.. 4 Installation Details Overview. 5 Eave and Gable Details. 6 Wall Flashing Details..
MODEL PA. Chimney and Exhaust Systems. Underwriters c. Laboratories Inc. LISTED
MODEL P Chimney and Exhaust Systems UL UL Underwriters c Laboratories Inc. LISTED LISTINGS The Schebler Model P chimney and exhaust system is listed by Underwriters Laboratories Inc. (UL) under file number
Landrover Discovery 3 - Rhino Tracks.
Parts List Important: Landrover Discovery 3 - Rhino Tracks. Place these instructions in the vehicle s glove box after installation is complete. Please read these instructions carefully prior to installation.
MODEL P1. Chimney and Exhaust Systems. Underwriters c. Laboratories Inc. LISTED
MODEL P1 Chimney and Exhaust Systems UL UL Underwriters c Laboratories Inc. LISTED LISTINGS The Schebler Model P1 chimney and exhaust system is listed by Underwriters Laboratories Inc. (UL) under file
5 X1 6 X1 1 X2 2 X2 9 X1 4
0 UGER SSEMBLY, 0 8 ITEM NO. PRT NO. DESCRIPTION QTY 0 CBLE,TRUSS,LONG,/FT, GLV,0 0 CBLE,TRUSS,SHORT,/FT, GLV,0 PB000 FRME SSEMBLY, 0 4 PB000 INFEED HOUSING SSEMBLY, 0XX PB000 TUBE SSEMBLY, DISCHRGE, 0
6. BUILDER / CONTRACTOR RESPONSIBILITIES
CUSTOMER INORMTION CUSTOMER NME: DDRESS: PROJECT NME: PROJECT LOCTION: GENERL NOTES. MTERILS 2. DESIGN 5. STRUCTURL PRIMER HNGR STRUCTURL STEEL PLTE LNGE MTERIL COLD ORMED LIGHT GUGE SHPES STRUCTURL CBLES
MODEL P4. Chimney and Exhaust Systems. Underwriters c. Laboratories Inc. LISTED
MODEL P4 Chimney and Exhaust Systems UL UL Underwriters c Laboratories Inc. LISTED LISTINGS The Schebler Model P4 chimney and exhaust system is listed by Underwriters Laboratories Inc. (UL) under file