METAL BUILDING AND STANDING SEAM COMPONENTS

Size: px

Start display at page:

Download "METAL BUILDING AND STANDING SEAM COMPONENTS"

Henry Bennett
5 years ago
Views:

1 METAL BUILDING AND STANDING SEAM COMPONENTS COMMERCIAL AND INDUSTRIAL KENTUCKY ILLINOIS 925 Rolling Hills Ln S.R. 121 Winchester, KY Mt. Zion, IL TEL: TEL: FAX: FAX:

2 COMMERCIAL BUILDING PANEL PROFILE SELECTIONS 12 PBR PANEL 36 1¼ REVERSE PBR PANEL ¼ PANEL FINISH GAUGE MINIMUM THICKNESS SUBSTRATE COATING WARRANTY GRADE WEIGHT (LFT) Clear Acrylic Resin Galvalume AZ # $3.87 SMP Standard Colors Galvalume AZ # $5.81 Pricing/Information Notes: 1. All Galvalume panels are in conformance with ASTM A792 as per above specifications. 2. All Galvanized panels are in conformance with ASTM A653 as per above specifications. 3. The Clear Acrylic Resin on Galvalume panels is a thin acrylic film intended to resist fingerprinting and handling marks and to eliminate the use of lubricants in the roll-forming process. It is not a warranted film and could discolor during the weathering process. 4. Non-Warranted panels may contain shape and/or finish defects and are not rejectable or returnable for any reason. If higher quality is expected, please select a suitable warranted finish. 5. Length tolerance is 1/4 +/- of the ordered length. 6. Add a $30.00 set-up charge for all reverse run panels. 7. Minimum panel length is Standard color selections are displayed on the current Mansea Metal Color Chart. For special colors, gauges or finishes, please inquire for pricing and availability. 9. Please inquire on large orders to verify available stock and delivery estimate. 10. All weights are estimates of actual material weights. Mansea Metal is not responsible for weight variances. 11. Edge of panels should never come in contact with concrete floor or sheeting notch. This will cause excessive edge creep and void the panel warranty. 12. Material should be inspected carefully prior to installation for any defects, including excessive oil-canning. Installation of material constitutes buyer acceptance. 1

3 ISOMETRIC VIEW Continuous tape sealant Inside closure Purlin Counter flashing Gutter Outside closure Rake trim Gutter Support Strap on 3-0 centers Downspout Rake angle Eave strut Corner trim Strap Zee girt Sheeting Angle Attach with two member screws Standard kickout Base angle Base trim 2

4 PBR TRIM /8 8.32# /8 9.83# / # / # / # / # # # # # # # ¾ 4.45# ¾ 4.45# Dashes following product numbers are used to indicate the following color codes: 3 06 Black 80 Gallery Blue 70 Blue 00 Galvalume 73 Bright Red 25 Gray 12 Brown 63 Light Stone 49 Burnished Slate 30 Polar White 17 Charcoal 24 Red 26 Forest Green 22 Sahara Tan

5 ¼ 15.17# ¼ 35.40# *ROOF SLOPE ½ - 4:12 *DIM A 6 ½ ¼ 14.50# ¼ 29.00# *ROOF SLOPE ½ - 4:12 *DIM A 6 ½ PRODUCT USE WITH ALL SCULPTURED WEIGHT PAINTED GLUME GUTTERS 2694 SPECIFY LEFT OR RIGHT.39# # # *ROOF SLOPE ½ - 4:12 *DIM A 4 ½ Dashes following product numbers are used to indicate the following color codes: 4 06 Black 80 Gallery Blue 70 Blue 00 Galvalume 73 Bright Red 25 Gray 12 Brown 63 Light Stone 49 Burnished Slate 30 Polar White 17 Charcoal 24 Red 26 Forest Green 22 Sahara Tan

6 ¼ 13.35# ¼ 26.48# *ROOF SLOPE ½ -4:12 *DIM A 4 ½ PRODUCT USE WITH ALL BOX GUTTER WEIGHT PAINTED GLUME 2696 SPECIFY LEFT OR RIGHT.26# # ¼ 14.50# ¼ 29.00# ¼ 13.35# ¼ 26.48# Dashes following product numbers are used to indicate the following color codes: 5 06 Black 80 Gallery Blue 70 Blue 00 Galvalume 73 Bright Red 25 Gray 12 Brown 63 Light Stone 49 Burnished Slate 30 Polar White 17 Charcoal 24 Red 26 Forest Green 22 Sahara Tan

7 /8 6.35# / # ¾ 11.04# ¾ 13.05# ¾ 15.21# ¾ 17.38# ¾ 21.91# ¾ 1.25# *45 o ELBOW ¾ 1.25# *90 o ELBOW Dashes following product numbers are used to indicate the following color codes: 6 06 Black 80 Gallery Blue 70 Blue 00 Galvalume 73 Bright Red 25 Gray 12 Brown 63 Light Stone 49 Burnished Slate 30 Polar White 17 Charcoal 24 Red 26 Forest Green 22 Sahara Tan

8 # # # /8 5.03# /8 3.62# /8 5.21# Dashes following product numbers are used to indicate the following color codes: 06 Black 80 Gallery Blue 70 Blue 00 Galvalume 73 Bright Red 25 Gray 12 Brown 63 Light Stone 49 Burnished Slate 30 Polar White 17 Charcoal 24 Red 26 Forest Green 22 Sahara Tan

9 ENDWALL # RAKEWALL # # # # Dashes following product numbers are used to indicate the following color codes: 8 06 Black 80 Gallery Blue 70 Blue 00 Galvalume 73 Bright Red 25 Gray 12 Brown 63 Light Stone 49 Burnished Slate 30 Polar White 17 Charcoal 24 Red 26 Forest Green 22 Sahara Tan

2614 10 2 7 4.70# 17.38 14.90 2613 10 2 7 4.70# 17.38 14.90 2602 10 2 24 15.82# 35.76 30.65 2602 20 20 2 24 31.39# 82.74 70.92 2619 10 2 11 7.70# 32.78 28.10 2619 20 20 2 11 13.40# 65.01 55.

10 # # # # # # PRODUCT LENGTH SLOPE WEIGHT PAINTED GLUME :12 to 4:12 p Dashes following product numbers are used to indicate the following color codes: 9 06 Black 80 Gallery Blue 70 Blue 00 Galvalume 73 Bright Red 25 Gray 12 Brown 63 Light Stone 49 Burnished Slate 30 Polar White 17 Charcoal 24 Red 26 Forest Green 22 Sahara Tan

11 ` # /8 8.65# # # ½ 27.85# ½ 55.80# Dashes following product numbers are used to indicate the following color codes: Black 80 Gallery Blue 70 Blue 00 Galvalume 73 Bright Red 25 Gray 12 Brown 63 Light Stone 49 Burnished Slate 30 Polar White 17 Charcoal 24 Red 26 Forest Green 22 Sahara Tan

12 RESIDENTIAL BUILDING PANEL PROFILE SELECTION QUICKSEAM PLUS QUICKSEAM 1 17/ / PANEL FINISH GAUGE MINIMUM THICKNESS SUBSTRATE COATING WARRANTY GRADE WEIGHT (LFT) Clear Acrylic Resin Galvalume AZ # $3.33 SMP Standard Colors Galvalume AZ # $4.35 Pricing & Application Notes: 1. All Galvalume panels are in conformance with ASTM A792 as per above specifications. 2. The Clear Acrylic Resin on Galvalume panels is a thin acrylic film intended to resist fingerprinting and handling marks and to eliminate the use of lubricants in the roll-forming process. It is not a warranted film and could discolor during the weathering process. 3. Length tolerance is 1/4 +/- of the ordered length. 4. A minimum roof slope of 3:12 is required, installed over a flat 5/8 plywood deck. 5. Oil-Canning is not a cause for rejection. 6. Standard color selections are displayed on the current Mansea Metal color chart. For special colors, gauges, width, or finishes, please inquire for pricing and availability. 7. Please inquire on large orders to verify available stock and delivery estimate. 8. All weights are estimates of actual material weights. Mansea is not responsible for weight variances. 9. Material should be inspected carefully prior to installation for any defects, including excessive oil-canning. Installation of material constitutes buyer acceptance. 10. Standard panel is available with striations only gauge panel is available in flat pan or with striations. Packaging charges: 1. Price includes standard packaging and strippable film application. 2. Crating...$ (up to 15-0) $ ( ) $ (over 25-0) 11

13 QUICKSEAM 12

14 QUICKSEAM TRIM RIDGE/HIP FLASH QS open hem STEP RIDGE CAP 2 ¼ ½ 3 ¾ QS / PANEL CAP 1 QS / RAKE TRIM 1 QS QS Dashes following product numbers are used to indicate the following color codes: 06 BLACK 80 GALLERY BLUE 70 BLUE 00 GALVALUME 73 BRIGHT RED 25 GRAY 12 BROWN 63 LIGHT STONE 49 BURNISHED SLATE 15 PLUM 17 CHARCOAL 30 POLAR WHITE 26 FOREST GREEN 24 RED 13

15 DRIP EDGE QS STANDARD W VALLEY 1 ½ 9 9 QS / STEP RAKE TRANSITION QS QS HIGH SIDE TRANSITION QS / Dashes following product numbers are used to indicate the following color codes: 06 BLACK 80 GALLERY BLUE 70 BLUE 00 GALVALUME 73 BRIGHT RED 25 GRAY 12 BROWN 63 LIGHT STONE 49 BURNISHED SLATE 15 PLUM 17 CHARCOAL 30 POLAR WHITE 26 FOREST GREEN 24 RED 14

16 PEAK CAP QS / FASCIA ANGLE 5 ½ QS ½ F-CHANNEL 2 1/2 1 QS / EAVE TRIM 3 ½ 2 QS ½ Dashes following product numbers are used to indicate the following color codes: 06 BLACK 80 GALLERY BLUE 70 BLUE 00 GALVALUME 73 BRIGHT RED 25 GRAY 12 BROWN 63 LIGHT STONE 49 BURNISHED SLATE 15 PLUM 17 CHARCOAL 30 POLAR WHITE 26 FOREST GREEN 24 RED 15

17 V-GROOVE SOFFIT SOF26 S VENTED V-GROOVE SOFFIT SOF26 V FLAT SHEETS Dashes following product numbers are used to indicate the following color codes: 06 BLACK 80 GALLERY BLUE 70 BLUE 00 GALVALUME 73 BRIGHT RED 25 GRAY 12 BROWN 63 LIGHT STONE 49 BURNISHED SLATE 15 PLUM 17 CHARCOAL 30 POLAR WHITE 26 FOREST GREEN 24 RED 16

18 BOX RAKE 3½ 4 QS / QS / CONTINUOUS CLEAT QS OFFSET CLEAT QS / Z CLOSURE 1½ QS / Dashes following product numbers are used to indicate the following color codes: 06 BLACK 80 GALLERY BLUE 70 BLUE 00 GALVALUME 73 BRIGHT RED 25 GRAY 12 BROWN 63 LIGHT STONE 49 BURNISHED SLATE 15 PLUM 17 CHARCOAL 30 POLAR WHITE 26 FOREST GREEN 24 RED 17

19 QUICKSEAM PLUS 18

20 QUICKSEAM PLUS TRIM RIDGE/HIP FLASH QSP open hem STEP RIDGE CAP 2 1/4 1/2 3 1/8 3/4 QSP / PANEL CAP 1 QSP / BOX RAKE 3 1/2 4 QSP / QSP / DRIP EDGE QSP / Dashes following product numbers are used to indicate the following color codes: 06 BLACK 80 GALLERY BLUE 70 BLUE 00 GALVALUME 73 BRIGHT RED 25 GRAY 12 BROWN 63 LIGHT STONE 49 BURNISHED SLATE 15 PLUM 17 CHARCOAL 30 POLAR WHITE 26 FOREST GREEN 24 RED 19

21 RAKE TRIM QSP QSP STANDARD W VALLEY QSP / HIGH SIDE TRANSITION QSP / PEAK CAP QSP / Dashes following product numbers are used to indicate the following color codes: 06 BLACK 80 GALLERY BLUE 70 BLUE 00 GALVALUME 73 BRIGHT RED 25 GRAY 12 BROWN 63 LIGHT STONE 49 BURNISHED SLATE 15 PLUM 17 CHARCOAL 30 POLAR WHITE 26 FOREST GREEN 24 RED 20

22 RAKE TRANSITION 3 QSP / open hem CONTINUOUS CLEAT QSP OFFSET CLEAT QSP / Z CLOSURE 1½ QSP / FASCIA ANGLE 1½ 5½ QSP Dashes following product numbers are used to indicate the following color codes: 06 BLACK 80 GALLERY BLUE 70 BLUE 00 GALVALUME 73 BRIGHT RED 25 GRAY 12 BROWN 63 LIGHT STONE 49 BURNISHED SLATE 15 PLUM 17 CHARCOAL 30 POLAR WHITE 26 FOREST GREEN 24 RED 21

23 F-CHANNEL 2½ QSP / VENTED V-GROOVE SOFFIT SOF26 V / V-GROOVE SOFFIT SOF26 S / FLAT SHEETS Dashes following product numbers are used to indicate the following color codes: 06 BLACK 80 GALLERY BLUE 70 BLUE 00 GALVALUME 73 BRIGHT RED 25 GRAY 12 BROWN 63 LIGHT STONE 49 BURNISHED SLATE 15 PLUM 17 CHARCOAL 30 POLAR WHITE 26 FOREST GREEN 24 RED 22

24 PBR AND QUICKSEAM ACCESSORIES PBR CLOSURE STRIP TYPE ADHESIVE SIZE CARTON SIZE WEIGHT A110 INSIDE YES # A111 OUTSIDE YES # VENTED CLOSURE PBR TYPE ADHESIVE SIZE CARTON SIZE WEIGHT A105B OUTSIDE YES # VENTED CLOSURE QUICKSEAM TYPE ADHESIVE SIZE CARTON SIZE WEIGHT A103 OUTSIDE YES 1 1/ # EMSEAL ADHESIVE SIZE CARTON SIZE A106 YES 1 (EXPANDED) WEIGHT LENGTH # 19 6 TUBE SEALANT TYPE COLOR TUBE SIZE CARTON SIZE A12 SOLAR SEAL ALL 10.3 FL. OZ. 12 TAPE SEALER TYPE WIDTH THICKNESS LENGTH CARTON QTY ROLL WEIGHT A107 FLAT 3/8 3/ # A108 FLAT 3/4 3/ # EXTREME ANGLE ROOF BOOT TEMPERATURE RANGE PIPE SIZE A201E -58 F TO +239 F 1/4-5 3/4 RETRO ROOF BOOT TEMPERATURE RANGE PIPE SIZE A F TO +239 F 3/4-2 1/2 A F TO+239 F 2-7 1/4 RUBBER ROOF BOOT ROOF BOOT TEMPERATURE RANGE PIPE SIZE A203 #3-58 F TO +239 F 1/4-5 A205 #6-58 F TO +239 F 5-9 A208 #8-58 TO +239 F 7-13 A209 #9-58 TO +239 F 10-18

25 RUBBER ROOF BOOT HIGH TEMPERATURE ROOF BOOT TEMPERATURE RANGE PIPE SIZE A204 #3-58 F TO +392 F 1/4-5 A206 #6-58 F TO +392 F #8-58 F TO +392 F H #9-58 TO +392 F DEKSTRIP TEMPERATURE RANGE SIZE A109-58ºF TO +239ºF 18 X 50 LF LIGHT TRANSMITTING PANEL LENGTH COLOR SQ. FT WEIGHT WEIGHT EACH S WHITE 8 OZ # S WHITE 8 OZ # S WHITE 8 OZ # SINGLE BUBBLE DOUBLE BUBBLE INSULATION WIDTH LENGTH SQ FT ROLL A # A # DB # DB # WEIGHT DOUBLE FACED TAPE WIDTH LENGTH WEIGHT PER ROLL FG / # ALUMINUM FOIL TAPE WIDTH LENGTH WEIGHT PER ROLL FG # SHURTAPE LAP TAPE WIDTH LENGTH WEIGHT PER ROLL FG #

26 FIBERGLASS INSULATION FIXED CLIP DESCRIPTION FG VRR PLUS 4 X100 FG INS (R10) FG VRR PLUS 6 X100 FG INS (R10) FG VRR PLUS 4 X100 FG INS (R13) FG VRR PLUS 6 X100 FG INS (R13) FG VRR PLUS 4 X100 FG INS (R19) FG VRR PLUS 6 X100 FG INS (R19) SSR SYSTEM HEIGHT WEIGHT EACH Q5450 QUICKSEAM PLUS 1 1/4.9 OZ WOOD FASTENER LENGTH HEAD SIZE TYPE BAG QTY WEIGHT PER BAG PLATED PAINTED /4 WOOD FASTENER # /2 1/4 WOOD FASTENER # /4 WOOD FASTENER # /2 1/4 WOOD FASTENER # 1 PANCAKE HEAD WOODSCREW HEAD SIZE TYPE BAG QUANTITY WEIGHT PER BAG SS101 #2 A # 1/8 X 3/16 POP RIVET TYPE BAG QUANTITY WEIGHT PER BAG STAINLESS STEEL # 1 1/4 SELF DRILLER HEAD SIZE TYPE BAG QUANTITY WEIGHT PER BAG SD114 5/16 DRILLER # PLATED PAINTED 7/8 LapTEK HEAD SIZE TYPE BAG QUANTITY WEIGHT PER BAG PLATED PAINTED 178 5/16 LapTEK 250

27 2 OZ PAINT TYPE COLOR TPO BRUSH SEE COLOR CHART 6 OZ PAINT TYPE COLOR TPO SPRAY SEE COLOR CHART SYNTHETIC UNDERLAYMENT SQ FT SIZE X # FELT SQ FT SIZE x 72

925 Rolling Hills Lane Winchester, KY 40391 1181 S.R. 121 Mt.

28 925 Rolling Hills Lane Winchester, KY S.R. 121 Mt. Zion, IL Phone: Fax: Phone: Fax: Part Weight Size Lite Color Number Each Price No White 98 $1, V White 103 $1, O White 108 $1, No 3070 NL White 103 $1, No White 110 $1, V White 115 $1, O White 121 $1, NL White 115 $1, No White 206 $2, x22 V V White 216 $2, O White 226 $2, NL White 216 $2, x36 O Note: * 24 ga panel, pre-hung in a 16 ga steel frame with three 4.5"x4" fixed pin stainless steel hinges * 6070 door includes astragal installed on the inactive panel * Door leaf is pre-drilled for entry lockset * ADA, low profile sill Standard Standard 8x36 NL Part Description Number Price 3853S Stainless Steel Ball Bearing Hinge $ TACO - Door closer - series 70 $ Touch bar exit w/ exterior lever $ Vertical rod $ Schlage Saturn Lever/Lever lockset $ Tell Courtland Lever/Lever lockset $ ga Steel Sub Frame Kit $ Prep charge for keying locksets $32.81 Part Number Size Style Color Weight Each Price 90020J 3020 Slider White 28 $ J 4030 Slider White 48 $ Slider 90056H 6040 Slider White 108 $ J 3020 Fixed White 32 $ J 4030 Fixed White 65 $ Fixed 90517J 6040 Fixed White 146 $1, Fire Rated Doors available: 45 min, 90 min & 3 hour --- call for pricing 1/18/2013

29 We ARE the manufacturer! KENTUCKY (corporate) 925 Rolling Hills Ln. Winchester, KY TEL: FAX: ILLINOIS 1181 S.R. 121 Mt. Zion, IL TEL: FAX:

MIRAGE. Panel Options: Details: Notes: Mirage. Mirage Test Data. Section Properties or Load Tables. - Panel width: 16 - Panel configurations: ribbed

MIRAGE. Panel Options: Details: Notes: Mirage. Mirage Test Data. Section Properties or Load Tables. - Panel width: 16 - Panel configurations: ribbed MIRAGE Mirage Panel 8 8 1 16 Coverage Mirage Mirage Test Data. Section Properties or Load Tables For any available Testing Data, Section Properties, or Load Tables, please visit www.mcelroymetal.com. For