Component Parts Sales Terms & Conditions

Size: px

Start display at page:

Download "Component Parts Sales Terms & Conditions"

Easter Bailey
6 years ago
Views:

1 Component Parts Sales Terms & Conditions All Orders received for component parts will be honored at our factory in accordance with the following terms and conditions. 1. Credit - All orders require a 30% deposit for first time customers or C.O.D. for established customers unless credit arrangements have been made prior to placing orders. 2. F.O.B. - All prices quoted are F.O.B. our plant. 3. Telephone Orders - Steel Building Supply, Inc. assumes no responsibility for the accuracy of the orders placed over the telephone. 4. Manufacturing - All orders for materials are normally ready for pickup in (5) five to (7) seven working days, depending on the type of materials ordered. Any discrepancies in orders must be reported within one week after pickup. All orders not picked up after (30) thirty days will be sold. 5. Cancellations or Changes - Cancellations or changes will not be accepted after an order has been placed and manufacturing has begun. Any refunds given on returnable items will be charged a 10% restocking fee. (Any manufactured items are not returnable.) 6. Price Changes - Prices are subject to change without notice. 7. Special Order Items - Items which we do not stock, and must special ordered are subject to a 50% deposit before it will be ordered and will be charged freight. 8. Storage - Galvalume, galvanized and painted sheet metal have a good service life when exposed to normal weather conditions. However, these same sheets are subject to stain when water sits upon or becomes trapped between the sheets. If sheets are to be stored for any period of time, they should be unbundled and stood on end against an interior wall. Metal should be spread or fanned out at the bottom ends to allow for air circulations and should be off the ground on blocks. Never cover the material with plastic as this promotes sweating. Failure to follow these steps may result in water stains and premature white rusting which the manufacturer cannot be held responsible for. 9. Cutting - When using a power saw to cut metal panels several precautions should be taken. Place the bottom (interior) surface of the sheet up and cover remaining sheets with a tarp to protect the top (exterior) surface from the hot metal filings and reduce the chance of damage. When doing the actual cutting, be sure to wear protective eyeglasses, and do it away from other unused or applied panels. Metal filings may become embedded in the surface of the sheet and if left alone will rust quickly. Be sure to wipe all filings from both surfaces before application, and remove filings made by screws immediately after application. 10. Delivery - Steel Building Supply, Inc. offers delivery right to your home or job sight. Delivery charges are based on mileage, so call for prices. 1

2 Panel PBR Panel 40 year limited warranty Per foot Per Square 26 GA Panel Group 1: Ash Gray, Frost White, Light Stone, Saddle Tan Group 2: Burnished Slate, Cocoa Brown, Charcoal Gray, Colony Green, Desert Tan, Hickory Moss, Ivory Cream, Leather Brown, Rustic Red Group 3: Emerald Green, Fern Green, Gallery Blue, Hawaiian Blue Group 4: Black, Boysenberry, Crimson Red, Copper Metallic Galvalume (25 year limited warranty) 1 1/ net Coverage Ag Panel 40 year limited warranty 26 GA Panel Group 1: Ash Gray, Frost White, Light Stone, Saddle Tan Group 2: Burnished Slate, Cocoa Brown, Charcoal Gray, Colony Green, Desert Tan, Hickory Moss, Ivory Cream, Leather Brown, Rustic Red Group 3: Emerald Green, Fern Green, Gallery Blue, Hawaiian Blue Group 4: Black, Boysenberry, Crimson Red, Copper Metallic Galvalume (25 year limited warranty) 29 GA Panel Group 1: Ash Gray, Frost White, Light Stone, Saddle Tan Group 2: Charcoal Gray, Cocoa Brown, Desert Tan, Hickory Moss, Ivory Cream, Leather Brown, Rustic Red Group 3: Emerald Green, Fern Green, Hawaiian Blue Group 4: Boysenberry Galvalume (25 year limited warranty) Per foot Per Square 9 3/4 36 net Coverage 38 Sheet Width We provide #2 panels. There is NO Warranty on Seconds. On all seconds and special orders on other colors, please call for pricing. effective April 23,

3 Trim Universal SUPPLY, INC. Standard Colors: Ash Gray, Black, Boysenberry, Burnished Slate, Cocoa Brown, Charcoal Gray, Colony Green, Copper Metallic, Crimson Red, Desert Tan, Emerald Green, Fern Green, Frost White, Gallery Blue, Hawaiian Blue, Hickory Moss, Ivory Cream, Leather Brown, Light Stone, Rustic Red, Saddle Tan Downspouts Colors Galvalume PE29 Kick for Downspout PEK Elbow (45 or 90) PE445 or PE490 1/2" Eave PE5 LENGTHS: 8 6, 10 6, or /4" 1/2" Small Top Eave PE500 LENGTHS: 8 6, 10 6, /16" Flat Sheet PE310 LENGTHS: UP TO 21 1 Base Trim PE44 LENGTHS: 8 6, 10 6, or effective April 23, 2016

4 Trim Universal 1x1 Angle with Hem Colors Galvalume 1 1 PE56 1 1/2 1 1/2 1 1/2 x 1 1/2 Anglewith Hem PE53 2x2 Angle with Hem 2 2 PE51 2x3 Angle with Hem 2 3 PE x3 Angle with Hem PE x4 Angle with Hem PE x1 Angle PE x2 Angle PE x3 Angle PE effective April 23, x4 Angle PE61 4

5 Trim Universal SUPPLY, INC. 10" 10" Transitional Flashing (Pitch- _:12 to _:12) PE75 LENGTHS: 8 6, 10 6, or 12 6 Colors Galvalume 1 1/4" 1 1/4" 19 9/16" 19 9/16" Valley PE15 LENGTHS: 8 6, 10 6, or /4" 1 1/4" 10" 10" Valley - Open Hem PE34 LENGTHS: 8 6, 10 6, or " 4" 2" 2" 1/4" 1/4" Ridge Row PE32 LENGTHS: 8 6, 10 6, or /8" 9 7/8" 1/2 Sheet Ridge Row PE38 LENGTHS: 8 6, 10 6, or 12 6 Specify Roof Pitch 4" 4" 5" 3/4" 3/4" 5" 1/2" 1/2" Ridge Row - 5 bends PE36 LENGTHS: 8 6, 10 6, or 12 6 Specify Roof Pitch 3/4" 4 1/8" 4 1/8" 4 1/8" 4 1/8 Post Wrap PE24 LENGTHS: 8 6, 10 6, or 12 6 Specify Roof Pitch 4 1/8" 2 1/4" 8 1/8" Rollup Door - 8 Cee Cover PE700 LENGTHS: 8 6, 10 6, or 12 6 Specify Roof Pitch 5 effective April 23, 2016

6 Trim AG 7/8" 3/4" 4 1 1/4" Sculptured Rake Colors PE31 Galvalume 1 1/2" 8" 1 1/4" 1 1/2" High Side Sculptured Rake PE62 Specify Roof Pitch 1" 1" 2 1/8" J-Trim PE6 3" 7/8" 3/4" Wall Flashing PE78 4 1/8" 4 Cee Cover PE20 1 Sculptured 4 Cee Cover (Small) PE68 Sculptured 4 Cee Cover (Large) PE69 effective April 23,

7 Trim AG SUPPLY, INC. 3/4" 1/2" 4 1/4" 7/8" 4 1/4" 7/8" 3/4" Post Frame Corner Colors PE100 Galvalume 1/2" 3/4" 7/8" 4 1/4" 4 1/4" 7/8" 3/4" Inside PFC PE /4" 3/4" 7/8" 4 Roof Corner PE72 Peak Boxes - Square PE210 Specify Roof Pitch Peak Boxes - Sculptured PE200 Specify Roof Pitch 1" 2" Sculptured Gutter - Lip In 4" 4 1/2" PE28 2" 1" 4" 4 1/2" Sculptured Gutter - Lip Out PE effective April 23, 2016

8 Trim AG & PBR 6 Cee Cover Colors Galvalume 6 1/8" PE17 2 Sculptured 6 Cee Cover (Small) PE66 $ Sculptured 6 Cee Cover (Large) PE67 8 1/8" 8 Cee Cover PE /2" Sculptured 8 Cee Cover (Small) PE64 4 1/2" 4 1/2" Sculptured 8 Cee Cover (Large) PE65 Peak Sheets DIER Specify Roof Pitch 4 3/16" 3/4" 1 1/2" 4 3/16 Roof Corner PE74 effective April 23,

9 Trim PBR SUPPLY, INC. 3/4" 6 7/16" 1 1/2" 2" 2" Sculptured Rake Colors PE10 Galvalume 8 7/8" 1/2" 2" 1/2" 2" 1" 2 5/16" 1" 1" 5" 5 1/2" 5" 1" 2 5/16" 1" 1" 5" 5 1/2" 5" 1" 1" 5 3/8" 6" High Side Sculptured Rake PE41 Specify Roof Pitch Gutter - Lip Out PE13 Gutter - Lip In PE14 Scupltured Gutter - 6 PE11 2" 1" 5 3/8" 5" Sculptured Gutter - 5 PE12 3/4" 4 3/16" 1 1/2" 4 3/16" 1 1/2" 3/4" Corner PE /2" 3/4" 4 3/16" 4 3/16" 3/4" 1 1/2" Inside Corner PE effective April 23, 2016

10 Trim PBR 6 1/8" 6 Cee Cover Colors PE17 Galvalume 2 7/16" 3 11/16" Sculptured 6 Cee Cover (Small) PE /16" 3 11/16" Sculptured 6 Cee Cover (Large) PE18 8 1/8" 8 Cee Cover PE7 3 3/8" 4 3/4" Sculptured 8 Cee Cover (Small) PE9 4 3/4" 4 3/4" 6" 2 1/4" 2" 2" 4 1/2" 4 1/2" 3/4" 1 1/2" effective April 23, 2016 Sculptured 8 Cee Cover (Large) PE8 Sculptured Eave PE40 Wall Flashing PE77 Special Trim Available upon request. Call for Pricing 10

11 Trim PBR SUPPLY, INC. 3/4" 3 11/16" 1 1/2" 4 11/16" 1 1/2" 3/4" Rake Colors PE120 Galvalume Peak Boxes - Square PE140 Specify Roof Pitch Specify Short or Long Side Down Peak Boxes - Sculptured PE150 Specify Roof Pitch 3 1/4" 1 1/2" 1 1/2" Header PE4 3 1/4" 1 1/2" 1 1/2" 4 1/8" 1 3/8" 2 3/4" Jamb PE3 4 Cee Cover PE20 Sculptured 4 Cee Cover (Small) PE22 2 3/4" 2 3/4" Sculptured 4 Cee Cover (Large) PE effective April 23, 2016

Fasteners Long Life Self Drillers 250 per bag 12 X 3/4 bag 12 X 1 bag 12 X 1 1/4 bag 12 X 1 1/2 bag 12 X 2 bag 12 X 1 (Without Washer) bag Long Life Wood Grips, Self Tapping 250 per bag 10 X 1 bag 10

12 Fasteners Long Life Self Drillers 250 per bag 12 X 3/4 bag 12 X 1 bag 12 X 1 1/4 bag 12 X 1 1/2 bag 12 X 2 bag 12 X 1 (Without Washer) bag Long Life Wood Grips, Self Tapping 250 per bag 10 X 1 bag 10 X 1 1/2 bag 10 X 2 bag 10 X 3 bag 14 X 1 1/2 bag Phillips Plymetal Flat Heads 250 per bag 10 X 1 7/16 bag 12 X 2 bag 1/4 X 2 3/4 bag Lap Self Drillers 100 per bag 14x7/8 bag Pop Rivets 100 per bag 1/8 bag Tex 5 Self Drillers Seal Tape 1 X 3/32 X 45 Roll 3/8 X 3/32 X 45 Roll Sealant Clear White Tube Sealant 250 per bag 1 1/4 bag Closure PBR Panel / Outside PBR Panel / Inside Ag Panel / Outside Ag Panel / Inside Universal AST Acrylic 1 1/4 X 1 1/2 x 15 Roll With Adhesive effective April 23,

13 Bolts SUPPLY, INC. Hex Bolt & Nut 1/2 X 1 1/4 A325Y 1/2 X 1 1/2 A325Y 1/2 X 2 A325Y 5/8 X 1 1/2 A325Y 5/8 X 1 3/4 A325Y 5/8 X 2 A325Y 5/8 X 2 1/2 A325Y 3/4 X 1 3/4 A325Y 3/4 X 2 A325Y 3/4 X 2 1/4 A325Y 3/4 X 2 1/2 A325Y Anchor Plate 3/8 X 6 X 6 (4 Bolts) 3/8 X 6 X 10 (6 Bolts) 1/2 X 6 X 14 (6 Bolts) Wedge Anchor 1/4 X 2 1/4 3/8 X 2 3/4 1/2 X 3 3/4 1/2 X 5 1/2 5/8 X6 3/4 X 5 1/2 Pin Anchor 1/4 X 1 1/4 X 2 Anchor Bolt 1/2 X 6 1/2 X 8 1/2 X 10 5/8 X 12 3/4 X 10 3/4 X 15 3/4 X 24 7/8 X 30 1 X effective April 23, 2016

Miscellaneous Roof Jacks #3 1/4 to 4 #5 4 to 7 #7 6

Retrofit 1/2 to 4 #201 Retrofit 4 to 9 1/4 #8

Lengths PBR Panel - 12 Lengths PBR Panel - 24 Lengths

Custom lengths of cable available Eyebolt with

Sheets and Trim (6 oz) Red Primer (1 Gallon) Red

Straps 2 Nylon Tie Down Fuel Treatment Lubercity Fuel

14 Miscellaneous Roof Jacks #3 1/4 to 4 #5 4 to 7 #7 6 to 11 #8 7 to 13 #9 10 to 18 #10 13 to 26 #101 Retrofit 1/2 to 4 #201 Retrofit 4 to 9 1/4 #8 Silicone Heat Resistant Skylights Ag Panel - 12 Lengths PBR Panel - 12 Lengths PBR Panel - 24 Lengths Fiberglass Cable Bracing 5/16 Cable 250 Roll Roll Custom lengths of cable available Eyebolt with Hillside Washer Grip Paint Touch-Up Spray Paint for Sheets and Trim (6 oz) Red Primer (1 Gallon) Red Primer (5 Gallons) Touch-Up Red Primer Spray Paint Straps 2 Nylon Tie Down Fuel Treatment Lubercity Fuel Power (32 oz bottle) Diesel Fuel Treatment effective April 23,

125 Insulation accessories 2 Wire Mesh: 6 X 150 Roll Double Sided Insulation Tape (180 Roll) PSP Patch Tape (150 Roll) Circular Vents White or Galvalume 12 Diameter 20

15 Insulation & Vents SUPPLY, INC. PSP Reinforced Backed 3PSP6E 3 X 6 Wide 3PSP52E 3 X 6 X 52 Roll (Stock) 3PSP100E 3 X 6 X 100 Roll (Stock) Special orders available R-Foil Quick Seam SB Single Bubble 74 X 125 Insulation accessories 2 Wire Mesh: 6 X 150 Roll Double Sided Insulation Tape (180 Roll) PSP Patch Tape (150 Roll) Circular Vents White or Galvalume 12 Diameter 20 Diameter For Die Formed Base Add Continuous Vents White Galvalume 9 X 10 Without Damper 9 X 10 With Damper For Die Formed Base Add Profile Vent Ag Panel (25 Roll) PBR Panel (25 Roll) Down Spout Accessories Down Spout Adapter - PVC44x4 Down Spout Outlet - Galv 4x effective April 23, 2016

16 KITS INCLUDE: DOOR, FRAME, HINGES, PREMIUM LOCKSET AND THRESHOLD THREE FRAME SIZES TO CHOOSE FROM: 4 1/4, 6 1/4, 8 1/4 ALL DOORS ARE 20GA. GALVANIZED WHITE PAINTED W/POLYSTYRENE CORE G STYLE DOOR HAS CLEAR TEMPERED GLASS effective April 23, 2016 Doors & Windows Steel Walk - Standard 3070M 3070M with Prep for Deadbolt Lock 3070G 4070M 6070M* Steel Walk - Special Order 4070M with Prep for Deadbolt Lock 4070G 8070M* 8070G* * WITH OVERLAPPING Z ASTRIGAL & SURFACE BOLTS ADDITIONAL DOOR SIZES AND GLASS OPTIONS AVAILABLE UPON REQUEST SPECIAL ORDERED DOORS WILL BE AVAILALBE 2-3 WEEKS FROM ORDER DATE Steel Walk Door Accessories Panic Hardware for Lever Panic Hardware for Lever Lockset - Lever Lockset - Ball Door Closer #4 Deadbolt Lock Hinges (Box of 3) Overlapping Strike Removable Mullion for Double Doors Windows Mill Bronze 2070 Slimline 3030 Horizontal Sliding w/ 1/2 Screen 3030 Horizontal Sliding Insulated 3030 Vertical Sliding w/ 1/2 Screen 6030 Horizontal Sliding w/ 1/2 Screen 6030 Horizontal Sliding Insulated 6040 Horizontal Sliding w/ 1/2 Screen WINDOWS WILL BE AVAILABLE 2-3 WEEKS FROM ORDER DATE Roll Up Door Accessories Radio Control with Photo Eyes 1 Button Remote 2 Button Remote 3 Button Remote 4 Button Remote Internal Operator (Series 650) (Series 2000 or above) External Operator w/eo Kit with Receiver & Photo Eyes Chain Hoist (Series 1000 and above) Wireless Keypad 16

X 8 1950B 10 X 10 1950B 10 X 10 1000 10 X 12 with Chain Hoist 1000 12 X 10 with Chain Hoist 1000 12 X 12 with Chain Hoist 1000 12 X 8 with Chain Hoist 2000 12 X 10 with Chain Hoist 2000 12 X 12 with

17 Rollup Doors SUPPLY, INC. Width X Height Series Price 3 X X X X X ALL MINI DOORS EQUIPPED WITH BEARINGS PLATES AND A LATCH SPECIAL SIZES AND COLORS AVAILABLE UPON REQUEST 8 X8 1950B 10 X B 10 X B 10 X X 12 with Chain Hoist X 10 with Chain Hoist X 12 with Chain Hoist X 8 with Chain Hoist X 10 with Chain Hoist X 12 with Chain Hoist X 14 with Chain Hoist X 16 with Chain Hoist X 14 with Chain Hoist X 8 with Chain Hoist X 10 with Chain Hoist X 14 with Chain Hoist X 14 with Chain Hoist X 16 with Chain Hoist X 14 with Chain Hoist X 14 with Chain Hoist X 16 with Chain Hoist X 14 with Chain Hoist X 16 with Chain Hoist 3100 COMMERCIAL PRICES INCLUDE MOUNTING PLATES. SPECIAL SIZES AND COLORS AVAILABLE UPON REQUEST 17 effective April 23, 2016

18 Iron #1 Wide Flange Beam Most Popular Size 6 X9# 8 X10# 8 X15# 10 X12# 12 X16# 12 X19# 14 X22# 14 X26# 16 X31# 18 X35# LENGTHS AVAILABLE: 30, 40, 50, AND 60 Other sizes available upon request Due to market fluctuations, call for current price. Angle Iron Most Popular Size 1 X1 X1/8 1 1/2 X1 1/2 X1/8 2 X2 X1/8 2 X2 X1/4 3 X3 X3/16 3 X3 X1/4 4 X4 X1/4 LENGTHS AVAILABLE: 20 Due to market fluctuations, call for current price. Flat Bar Most Popular Size 1/8 X2 1/4 X2 1/4 x4 1/4 X6 1/4 X4 1/4 X6 1/2 X4 1/8 X4 1/2 x5 1/2 X6 1/2 X8 1/4 X10 LENGTHS AVAILABLE: 20 Due to market fluctuations, call for current price. Expanded Metal 1/2 X 16# Flat 3/4 X9# Flat 3/4 X10# Flat 1 1/2X10# Flat 3/4 X9# Std 3/4 X10# Std #3 Grating Due to market fluctuations, call for current price. Square Tubing Galvanized 2, 3 and 4 * Available in random lengths *Due to market fluctuations, call for current price. effective April 23, 2016 Square Tubing Red Primed /2 x 1/2 16 GA N/A 3/4 x 3/4 16 GA 1 x 1 14 GA 1 1/2 x 1 1/2 14 GA 2 x 2 14 GA 4 x 4 14 GA 3 x 3 11 GA 4 x 4 11 GA 18

19 Cees & Zees SUPPLY, INC. Cee and Zee Sections Red Primed Galvanized 4 X 2 14 GA N/A /L.ft 6 X 2 14 GA N/A /L.ft 4 X 2 1/2 16 GA /L.ft 4 X 2 1/2 14 GA /L.ft 6 X 2 1/2 14 GA /L.ft 8 X 2 1/2 16 GA /L.ft 8 X 2 1/2 14 GA /L.ft 8 X 2 1/2 12 GA N/A /L.ft 10 X 2 1/2 14 GA /L.ft 10 X 2 1/2 12 GA N/A /L.ft 8 X 3 1/2 16 GA 8 X 3 1/2 14 GA 8 X 3 1/2 12 GA Stock lengths available: 20, 25 and 30 - Red Cee Sections Only Custom lengths available upon request Open Cee Red Primed Galvanized 4 1/8 X 3 Leg 14 GA /L.ft 6 1/8 X 2 Leg 14 GA /L.ft 6 1/8 X 3 Leg 14 GA /L.ft 8 1/8 X 2 Leg 14 GA /L.ft 8 1/8 X 3 Leg 14 GA /L.ft Eave Struts Red Primed 4 X 2 1/2 X 4 14 GA /L.ft 6 X 2 1/2 X 4 14 GA /L.ft 8 X 2 1/2 X 4 14 GA /L.ft 8 X 3 X 5 14 GA /L.ft Punching Available Base Angle Red Primed Galvanized 2 X 2 14 GA N/A /L.ft 2 X 4 14 GA /L.ft Stock lengths available: 20 and effective April 23, 2016

20 Cees & Zees Punched A, B, & G Punched Red Primed Galvanized 4 X 2 1/2 16 GA * * 4 X 2 1/2 14 GA * * 6 X 2 1/2 16 GA * N/A 6 X 2 1/2 14 GA * * 8 X 2 1/2 16 GA * * 8 X 2 1/2 14 GA * * 8 X 2 1/2 12 GA * * 10 X 2 1/2 16 GA * * 10 X 2 1/2 14 GA * * 10 X 2 1/2 12 GA * * 6 X 3 1/2 16 GA * N/A 6 X 3 1/2 14 GA * N/A 6 X 3 1/2 12 GA * N/A 10 X 3 1/2 16 GA * * 10 X 3 1/2 14 GA * * 10 X 3 1/2 12 GA * * Some special punching is available. *Due to market fluctuations, call for current price. Ask your Sales Representative about our Prefab Metal Buildings. A complete building package that may meet your needs. effective April 23,

21 Punch & Lap Patterns SUPPLY, INC. For Cees and Zees Pattern A 4 Cee, Zee Cee, Zee Cee, Zee Cee, Zee / Note: Round holes are Oblong are x 3/ /4 Pattern G Pattern SL Pattern B 1 3/4 1 3/4 1 3/ / / /4 For Cees and Zees Lap Pattern B (All laps available in Pattern A plus 5 Offset and Super Lap) 21 effective April 23, 2016

22 Lap Patterns For Cees and Zees Lap Pattern A effective April 23,

23 Notes: SUPPLY, INC effective April 23, 2016

24 Common Rafter Lengths (Peak to Side Wall) Running Feet 1:12 Pitch 2:12 Pitch 3:12 Pitch 4:12 Pitch 5:12 Pitch 6:12 Pitch / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

METAL BUILDING AND STANDING SEAM COMPONENTS

METAL BUILDING AND STANDING SEAM COMPONENTS COMMERCIAL AND INDUSTRIAL KENTUCKY ILLINOIS 925 Rolling Hills Ln. 1181 S.R. 121 Winchester, KY 40391 Mt. Zion, IL 62549 TEL: 859-744-4475 TEL: 217-864-5835 FAX: