Instructions for 2-row monitoring only

Size: px
Start display at page:

Download "Instructions for 2-row monitoring only"

Transcription

1 Installation Instructions for CaseIH cotton picker models: Instructions for 2-row monitoring only Ensure the model numbers shown above correspond to the machine model. If you receive the incorrect installation instructions, contact Ag Leader Technology Technical Support at (515) ext. 1. PN: January 2010 Rev B 1

2 Ag Leader Technology Note: Indented items indicate parts included in an assembly listed above Quantity by Model Part Name/Description Part Number 2555 CPX420 Instruction Kit Cotton, Emitter Assembly Detector Assembly Header Sensor Standard Arm Assy (18 in rod, S-hook, chain, spring) Antenna Mounting Plate (with dual lock) Hood Adapter Assembly Ladder Extension Kit Module Kit Speed Mounting plate Speed Sensor module (Rev 8) Module installation kit Drill bit 13/64 in Drill bit 9/32 in Transfer punch 11/32 in Hex head cap screw 1/4 x 3/4 in Slotted pan head screw 1/4 x 3/4 in Hex nut 1/4 in Split lock washer 1/4 in External tooth lock washer 1/4 in Self-tapping screw 1/4 x 3/4 in Hex serrated flange nut 1/4 in Sheet metal screw #14 x 1/2 in Cable Kit Cotton (2555, CPX420) Display cable 12 ft Power cable Power control relay Header height adapter cable CAN Bus Harness CAN Bus stub 2 ft Fan speed cable 12 ft Ground speed cable 8 ft Cable installation kit Cab wall plate kit Cab wall plate Phillips screw - #6 x 1/2 in Hex nut # Internal tooth lock washer # Self-tapping screw 1/4 x 3/4 in Grommet 3/4 in. ID x 1-7/16 in. P.H.D RTV silicon sealant Blade fuse 20 amp January 2010 Rev B

3 Note: Indented items indicate parts included in an assembly listed above Quantity by Model Part Name/Description Part Number 2555 CPX420 Gray plastic cable clamps Cable tie 15 in Cable tie 6 in Adhesive mounting base 2 way Parts Kit Cotton, 2 rows (2155/2555, CPX420/610/620) Post bracket Anchor bar Header Sensor Inst. Kit Generic S-Hook Cap screw 5/16 x 1 in Lock Nut 5/16 in Flat Washer 5/16 in Drill bit 9/32 in Transfer punch 11/32 in Square file 5/16 in File handle Monitor bracket installation kit Drill Bit 13/64 in Cap screw 1/4 x 3/4 in Cap screw 1/4 x 1 in Hex Nut 1/4 in Hex lock nut 1/4 in Split Lock washer 1/4 in Flat Washer 1/4 in Self tapping screw 1/4 x 3/4 in Hardware kit 35 pieces Serrated flange nut 1/4 in Slotted truss head screw 1/4 x 1/2 in Permanent marker PN: January 2010 Rev B 3

4 Ag Leader Technology Important Notices Please carefully follow these step-by-step instructions. If you have questions, contact Ag Leader Technology at x 1. Direction words (LEFT and RIGHT) are commonly used when describing an installation procedure. Interpret direction words as if sitting in operator seat. Signal words (DANGER, WARNING, CAUTION and NOTE) are provided to draw attention to information that is important for the safe/correct installation and operation of this product. Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. CAUTION Indicates practices that may result in property damage, but do not involve personal injury. NOTE The preferred signal word to address practices not involving property damage, or personal injury. Section Contents Item Page System Layout 5 Installing Display 6 Installing Display Cable 8 Installing Power Cable 10 Installing Speed Sensor Module 11 Installing Fan Speed Cable 12 Installing Ground Speed Cable 13 Installing Header Height Sensor 14 Installing Ladder Extension Kit 16 Installing Hood Adapters and Flow Sensors 19 Installing CAN Bus Harness 22 Final Inspection 23 Operational Checkout 24 4 January 2010 Rev B

5 System Layout This section illustrates the general layout of the cotton yield monitoring system. The purpose of the illustration is to aid in the installation procedure. Use this section for reference as needed when installing the system components. Figure 1. System Layout PN: January 2010 Rev B 5

6 Ag Leader Technology Installing Display Parts required for procedure: (1) Display (1) Post bracket (1) Anchor bar (reinforces post bracket) (1) U-bracket (1) Marking pen (1) Transfer punch (1) Drill 13/64 in. (4) Self-tapping screw 1/4 x 3/4 in. (3) Hex head cap screw 1/4 x 3/4 in. (1) Hex head cap screw 1/4 x 1 in. (4) Flat washer 1/4 in. (2) Split lock washer 1/4 in. (2) Hex nut 1/4 in. (2) Lock nut 1/4 in. Step-by-Step Procedure 1. Assemble anchor bar to right post bracket using (2) 1/4 x 3/4 in. cap screws and (2) 1/4 in. lock nuts. 1/4 in. cap screws and nuts are used on 2-hole end of anchor bar. See Figure 2 for an illustration of how anchor bar assembles to post bracket. Anchor bar Post bracket U-bracket Figure 2. Display bracket assembly 6 January 2010 Rev B

7 2. Position bracket assembly on right cab post so top of bracket is approximately 3 in. below ceiling as shown in Figure 3. Figure 3. Post bracket installed 3. Using post bracket as a template, mark (4) holes on cab post with permanent marker and center punch to maintain proper alignment. 4. Drill holes with 13/64 in. drill provided. 5. Attach post bracket to cab post with 1/4 x 3/4 in. self-tapping screws. 6. Attach U-bracket to post bracket using 1/4 in. cap screws, washers, and nuts as shown in Figure 2. NOTE: Multiple mounting holes and slots allow for versatility in mounting. Ensure gauges on pillar will not be blocked. 7. Before tightening U-bracket, install display to determine best position for ease of viewing. 8. Remove display and tighten U-bracket. 9. Re-install display. PN: January 2010 Rev B 7

8 Ag Leader Technology Installing Display Cable Parts required for procedure: (1) Display cable (1) Grommet 3/4 in. ID x 1-7/16 in. P.H.D. Cable clips Step-by-Step Procedure 1. Fully open right cab window. The first several steps will be performed while standing outside of cab near opened window. 2. Remove cover from console that is located right of operator seat and beneath operator controls. 3. Locate display cable and power control relay. Connect power control relay to mating 4-position weather pack connector of display cable. See Figure 1 for an illustration. 4. Route 4-position round cannon connectors and ethernet connector (located at one end of display cable) into console and toward back wall. Continue routing cable toward cab wall so connectors are accessible behind removable wall plate in a later step. Remaining connectors (near same end of display cable that is routed into cab corner) should remain accessible from top side of console. 5. Remove black molded plastic shroud from right exterior side of cab as shown in Figure 4 to expose removable wall plate. 8 January 2010 Rev B Plastic cover Figure 4. Molded plastic cover on right side of cab

9 6. Remove screws from perimeter of metal plate that cables pass through. Pull metal wall plate away from cab wall. 7. Remove adhesive cover from existing round hole above wall plate. 8. Locate 4-position round cannon connectors and ethernet connector of display cable that was routed into corner of cab in step 4 by reaching through large access hole in cab wall. 9. Route 4-position round cannon connectors and ethernet connector of display cable through round hole of cab wall from inside. There is an interior wall that display cable must pass through before pulling through exterior hole. 10. Cut provided 3/4 in. I.D. x 1-7/16 in. P.H.D. grommet and install it around display cable. Insert grommet into hole in cab wall. NOTE: If GPS will be installed, route GPS cable into cab thru same hole that display cable connector is passed through before installing grommet. Connect GPS cable to mating 9-position serial connector of display cable. Provided null-model cable will be required for non-ag Leader branded GPS units. 11. Reinstall wall plate. 12. Do not replace molded plastic shroud at this time. It will be replaced after CAN Bus harness is installed in a later section. 13. Inside cab, route 28-position round connector on opposite end of display cable down to floor within console. Proceed to route connector through gap between console wall and cab wall as shown in Figure 5. Console wall will flex enough to allow connector to pass through. 14. Route display cable forward along floor to cab pillar and then up pillar to display. 15. Connect display cable to mating connector on back of display. CAUTION: Never use force to mate electrical connectors. If connectors do not mate easily, they are not aligned properly. 16. Coil excess cable in console beside seat. 17. Secure cable as necessary using provided cable clips and ties. PN: January 2010 Rev B 9

10 Ag Leader Technology Display cable Figure 5. Display cable exiting console Installing Power Cable Parts required for procedure: (1) Power cable Cable clips Step-by-Step Procedure 1. Mate tee end of power cable with auxiliary power connector located behind and to the right of operator seat. 2. Route opposite end of power cable with 3-socket tower connector down into console beside operator seat. 3. Mate 3-socket tower connector of power cable with 3-pin shroud connector of display cable. Display cable connector will be inside console. NOTE: The power cable provides full-time power and switched power to the display. By default, the display will power up and down with the ignition switch. This feature can be disabled by removing the fuse from the switched power wire. If the fuse is removed, the operator must turn the display on and off manually. 10 January 2010 Rev B

11 Installing Speed Sensor Module Parts required for procedure: (1) Speed Sensor module (1) Punch (1) Drill bit 13/64 in. (2) Sheet metal screw #14 x 1/2 in. Step-by-Step Procedure 1. Position Speed Sensor module above cab wall plate and plastic shroud as shown in Figure 6. Figure 6. Speed module installed 2. Mark locations of center hole in each flange onto cab wall. A light colored marker or scribe is ideal for this procedure. CAUTION: Make sure mounting hole locations will not interfere with anything behind cab wall before drilling. 3. Punch and drill (2) holes using provided punch and 13/64 in. drill bit. 4. Secure Speed Sensor module to cab wall using provided #14 x 1/2 in. sheet metal screws. PN: January 2010 Rev B 11

12 Ag Leader Technology Installing Fan Speed Cable Parts required for procedure: (1) Fan speed cable Cable ties Step-by-Step Procedure 1. Locate fan speed sensor connection on right side of machine as shown in Figure 7. Fan speed cable connection Figure 7. Fan speed connection 2. Disconnect existing connectors and install tee end of fan speed sensor between existing wiring harness and fan speed sensor. 3. Route fan speed cable to Speed Sensor module located on right wall of cab. Route cable along existing wires, hoses, or tubes. Secure with cable ties to keep clear of moving parts. 4. Connect fan speed cable to mating 6-pin Shaft Speed connector of Speed Sensor module. Coil and secure excess cable with cable ties. 12 January 2010 Rev B

13 Installing Ground Speed Cable Parts required for procedure: (1) Ground speed cable Cable ties Step-by Step Procedure 1. Locate ground speed sensor connection at transmission as shown in Figure 8. Ground speed sensor Tee connection Figure 8. Ground speed sensor connection 2. Disconnect existing connectors and install tee end of ground speed sensor between existing wiring harness and ground speed sensor. 3. Route ground speed cable to Speed Sensor module located on right wall of cab. Route cable along existing wires, hoses, or tubes. Secure with cable ties to keep clear of moving parts. 4. Connect ground speed cable to mating 2-pin Ground Speed connector of Speed Sensor module. Coil and secure excess cable with cable ties. PN: January 2010 Rev B 13

14 Ag Leader Technology Installing Header Height Sensor Parts required for procedure: (1) Header height sensor with integral cable (1) Arm assembly (18 in. rod, S-hook, chain, spring) (1) S-hook (1) Punch (1) Drill bit 11/32 in. (2) Hex head cap screw 5/16 x 1 in. (4) Flat washer 5/16 in. (2) Lock nut 5/16 in. Cable ties Step-by-Step Procedure 1. Install arm assembly into hole of sensor pivot shaft using a nut and lock washer on each side of shaft. 2. Position header sensor in center of support beam near right side of cab as shown in Figure 9. Figure 9. Positioning header sensor 3. Mark mounting holes on support beam using header sensor as a template. 4. Center punch and drill mounting holes using provided punch and 11/32 in. drill bit. 5. Install header sensor using (2) 5/16 x 1 in. cap screws, washers and lock nuts. 6. Attach S-hook to existing cap screw on row unit as shown in Figure January 2010 Rev B

15 Cap screw Figure 10. Cap screw on row unit for attaching S-hook 7. Connect adapter cable to integral cable of header sensor and route to Speed Sensor module on right wall of cab. 8. Connect header sensor cable to mating 8-pin Position Sensor connector of Speed Sensor module. Coil and secure excess cable with cable ties. Figure 11. Finished installation PN: January 2010 Rev B 15

16 Ag Leader Technology Installing Ladder Extension Parts required for procedure: (2) Ladder extension (2 x 3 in. rectangular tubing) (1) Catwalk extension (L-shaped plate) (1) Safety lock mount (1) Drill bit 3/8 in. (2) Cap screw 3/8 x 1 in. (4) Carriage bolt 3/8 x 1 in. (4) Flat washer 3/8 in. (8) Lock nut 3/8 in. Step-by-Step Procedure 1. Remove (2) 3/8 in. cap screws holding ladder in place as shown in Figure Remove (2) carriage bolts that secure catwalk to angle iron support. Carriage bolts Safety lock bracket Cap screws Front of machine Figure 12. Bolts to remove for ladder extension installation 3. See Figure 13. Place 2 x 3 in. tube extensions between bars to extend out 3 in. Attach using 3/8 in. cap screws, washers and lock nuts. Reuse existing 3/8 x 2 in. cap screws on backside and use 3/8 x 1 in. cap screws on front. 16 January 2010 Rev B

17 Tube extensions Front of machine Figure 13. Tube extensions 4. Position catwalk extension plate on catwalk as shown in Figure 14. Mark and drill 3/8 in. hole in top of catwalk using extension plate as template. 5. Attach extension plate over top of existing parts using (4) 3/8 in. carriage bolts and lock nuts as shown in Figure 14. Extension plate Front of machine New hole to drill Figure 14. Catwalk extension installed 6. Remove safety lock mounting bracket (Figure 15) from machine. PN: January 2010 Rev B 17

18 Ag Leader Technology 7. Remove safety lock chain and install on new safety lock mounting bracket. 8. Place rod through hole and install new mounting bracket into original holes as shown in Figure 15. Figure 15. Safety lock installed 18 January 2010 Rev B

19 Installing Hood Adapters and Flow Sensors Parts required for procedure: (4) Emitter/Detector pair (2) Hood adapter (28) Truss head screw 1/4 in. (28) Flange nut 1/4 in. NOTE: Flow sensor installation is dependent on machine configuration. Install hood adapters and flow sensors as follows based on machine configuration. 4-Row Wide: Rows 1 & 4 4-Row Narrow: Not Supported 5-Row Narrow: Rows 1 & 5 Step-by-Step Procedure 1. Remove double-width hoods (as specified above) from machine. 2. See Figure 16. From bottom of hood, measure up 13-3/4 in. on back of hood and 20-1/4 in. on front. 3. Using a square, extend marks around hood as shown in Figure 16. This identifies section of hood to be removed. Figure 16. Section of hood to remove PN: January 2010 Rev B 19

20 Ag Leader Technology 4. Use a suitable cutting tool to cut along inside edge of marks. 5. File burrs and rough edges. 6. Insert hood adapter flanges inside hood. Mark (14) locations for mounting holes on hood. 7. Center punch and drill (14) mounting holes as shown in Figure 17 using provided punch and 9/32 in. drill bit. File burrs from around holes. Figure 17. Mounting holes drilled in hood 8. Attach hood adapter to hood using provided truss head screws and flange nuts as shown in Figure 18. Install screws from inside so nuts are on outside of hood. 20 January 2010 Rev B

21 Figure 18. Hood adapter secured to hood 9. Reinstall hood assembly onto chute. 10. Repeat Steps 1 through 9 to install 2 nd hood adapter. 11. See Figure 19. Install emitters (sensor with integral cable) on front side of hood adapters and detectors on back side of hood adapters. Hinge up and tighten captive nuts. Detector (Back of Hood) Emitter (Front of Hood) Figure 19. Emitter and Detector pair PN: January 2010 Rev B 21

22 Ag Leader Technology Installing CAN Bus Harness Parts required for procedure: (1) CAN Bus harness Cable ties Step-by-Step Procedure CAUTION: The CAN Bus harness must be secured with cable ties to prevent damage from cotton and other debris. When securing CAN Bus to machine, make sure it will move appropriately when ducts are raised or lowered when switching to and from transport mode. CAN Bus harness may be damaged if care is not taken when securing it. 1. Locate end of CAN Bus harness that is labeled Sensor 1. Connect Sensor 1 connector of CAN Bus harness with mating connector of left-most detector installed on machine. See Figure 20. Emitter pigtail 22 January 2010 Rev B Figure 20. CAN Bus connected to detectors 1 & 2 2. Connect emitter pigtail (located on front side of duct) to mating connector on CAN Bus harness. 3. Proceed to connect CAN Bus harness to corresponding sensor sets from left to right across machine until all sensor sets have been connected. 4. Route remainder of CAN Bus harness down to display cable that was installed in a previous section.

23 5. Plug CAN Bus into display cable. Black female connector of display cable mates with black male connector of Y-Splice on CAN Bus. 6. Plug black female connector of speed module stub into remaining male connector (light color) of Y-Splice on CAN Bus. 7. Plug gray female connector of speed module stub into 4-pin CAN Bus connector of Speed Sensor module. 8. Coil and secure excess CAN Bus harness near display cable so that it can be tucked under molded plastic shroud that protects cab wall plate. 9. Replace molded plastic shroud. Final Inspection Installation is complete. Walk around machine to verify the following: All cable connections have been made. Excess cable has been secured to prevent interference. All tools have been removed from machine. All cap screws and captive nuts are tight on sensor mounts. Safety shields have been replaced. PN: January 2010 Rev B 23

24 Ag Leader Technology Operational Checkout An operational checkout cannot be performed until a harvest configuration has been created and activated. Refer to Quick Reference Sheet (see instruction kit) or Operator s Manual for instructions. Step-by-Step Procedure 1. Press and release power button. 2. Create and activate a harvest configuration. a. Refer to Quick Reference Sheet and/or Operator s Manual. 3. Verify CAN modules are powered and communicating. a. Each module has an LED indicator. It should flash green. 4. From RUN screen, touch SYSTEM button in top right corner of screen. Touch CAN tab. All modules should be displayed in the list. You should see (1) Speed Sensor module and as many Flow Sensor modules as are installed on the machine. If all modules are not in list, cycle power to display. A machine monitoring (2) rows should have a list that looks like this: 208 FLOW SENSOR 209 FLOW SENSOR 239 SPEED MODULE 5. Touch Diagnostics tab within SYSTEM screen. a. Verify FAN SPEED (RPM) signal. 1. Fan speed should register zero with fan off. 2. Engage fan. Display should register an RPM value. At full throttle, fan speed should be greater than 2500 RPM. b. Verify GROUND SPEED (MPH) signal. 1. Ground speed should register zero with picker at rest. 2. Move picker slowly. Display should register MPH value at low speeds (below 1 MPH). NOTE: If using wheels as primary speed sensor, ground speed reading on display may not agree with picker readout until system has been calibrated. c. Verify HEADER HEIGHT (%) signal 1. Raise and lower header. Header height % should increase and decrease respectively. 24 January 2010 Rev B

25 Revision History Date Revision Initials Changes Aug 2007 A SLH - Initial release of instructions Jan 2010 B WDS - Changed display cable PN: January 2010 Rev B 25

Instructions for 2-row monitoring only

Instructions for 2-row monitoring only Installation Instructions for CaseIH cotton picker models: Instructions for 2-row monitoring only CAUTION: Ensure the model numbers shown above correspond to the machine model. If you receive the incorrect

More information

2-row and All-row systems included.

2-row and All-row systems included. Ag Leader Technology Cotton Picker Installation Installation Instructions for John Deere cotton picker models: 2-row and All-row systems included. IMPORTANT: Ensure the model numbers shown above correspond

More information

Rostselmash Torum 740

Rostselmash Torum 740 Note: Indented items indicate parts included in an assembly listed above Quantity by Model Part Name/Description Part Number 740 Combine Kit Torum 740 4100762 1 Threaded Arm Assembly 2000311-2 1 Header

More information

Installation Instructions for John Deere cotton picker models: 9986 & 2-row and All-row systems included.

Installation Instructions for John Deere cotton picker models: 9986 & 2-row and All-row systems included. Ag Leader Technology Cotton Picker Installation Installation Instructions for John Deere cotton picker models: 9986 & 9996 2-row and All-row systems included. IMPORTANT: Ensure the model numbers shown

More information

Part Name/Description Part Number Quantity Instruction Kit Metalfor Flow Sensor

Part Name/Description Part Number Quantity Instruction Kit Metalfor Flow Sensor NOTE: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Instruction Kit Metalfor 4101091 1 Flow Sensor 4001356 1 Deflector plate 2000612-1 1

More information

Flow Sensor

Flow Sensor NOTE: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Instruction Kit Metalfor 4101091 1 Quick reference sheet 2002831-36 1 Installation instructions

More information

MF 9520 / 9540 / 9560, Challenger 540C / 560C

MF 9520 / 9540 / 9560, Challenger 540C / 560C Ag Leader Combine Installation Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number 9520 Quantity by Model 9540 540C Parts Kit 2001312-69 1 1 1 Drill

More information

PFadvantage Metalfor Araus 1360

PFadvantage Metalfor Araus 1360 Metalfor Araus 1360 Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Instruction Kit Metalfor Araus 2005300-14 1 Display Bracket 4000134

More information

Lexion 570R/575R, 580R/585R, 590R/595R

Lexion 570R/575R, 580R/585R, 590R/595R Note: Indented items indicate parts included in an assembly listed above Quantity by Model 2006+ All Years Part Name/Description Part Number 570R 575R 580R 585R Instruction Kit Lexion 570/580/590 2005500-5

More information

PFadvantage JD 3300/4400/6600/7700; 4420

PFadvantage JD 3300/4400/6600/7700; 4420 Ag Leader Technology Combine Installation JD 33//66/77; 2 Note: Indented items indicate parts included Quantity by Model in an assembly listed above Early Late Part Name/Description Part Number 3 3 6 6

More information

PFadvantage MF 6850/6855; Ideal 9080/9090

PFadvantage MF 6850/6855; Ideal 9080/9090 MF 6850/6855; Ideal 9080/9090 Note: Indented items indicate parts included in an Quantity by Model assembly listed above MF Ideal Part Name/Description Part Number 6850 6855 9080 9090 Instruction Kit MF

More information

Part Number Part Name/Description Instruction Kit JD 9x50/9x60/9x Flow Sensor

Part Number Part Name/Description Instruction Kit JD 9x50/9x60/9x Flow Sensor ATTENTION If installing combine kit on a 9x70 series combine with factory-installed yield/moisture sensors, please take note of the special instructions in the Operational Checkout section (page 41) for

More information

Quantity by Model an assembly listed above Early Models Late Models. Instruction Kit JD 9x00/9x

Quantity by Model an assembly listed above Early Models Late Models. Instruction Kit JD 9x00/9x Note: Indented items indicate parts included in Quantity by Model an assembly listed above Early Models Late Models Part Name/Description Part Number 9400/ 9500/ 9600/ 9400 9500 9600 9410 9510 9610 Instruction

More information

Clutch Control. PN: November 2013 Rev E 1

Clutch Control. PN: November 2013 Rev E 1 NOTE: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Module Kit 4100533 1 Cable Installation Kit 2000901-1 1 Alcohol swab packet 2002811 2

More information

Installation Instructions for John Deere cotton picker model:

Installation Instructions for John Deere cotton picker model: Cotton Picker Parts List Installation Instructions for John Deere cotton picker model: Two row and all row systems included. IMPORTANT: Ensure the instructions you use for the installation correspond to

More information

Installation Instructions for John Deere cotton picker models:

Installation Instructions for John Deere cotton picker models: Cotton Picker Installation Installation Instructions for John Deere cotton picker models: Two row and all row systems included. IMPORTANT: Ensure the instructions you use for the installation correspond

More information

MF 9690, 9790, Challenger 660, 670

MF 9690, 9790, Challenger 660, 670 Ag Leader Technology Parts List Note: Indented items indicate parts included in an assembly listed above Quantity by Model Part Name/Description Part No. MF 9690 MF 9790 Challenger 660 Challenger 670 Instruction

More information

Installation Instruction for John Deere cotton picker models:

Installation Instruction for John Deere cotton picker models: Cotton Picker Installation Installation Instruction for John Deere cotton picker models: 9900-9950 IMPORTANT: Ensure the instructions you use for the installation correspond to the machine model. If you

More information

Installation Instructions for John Deere cotton stripper models:

Installation Instructions for John Deere cotton stripper models: Installation Instructions for John Deere cotton stripper models: 7445 7450 7455 IMPORTANT: Ensure the instructions you use for the installation correspond to the machine model. If you receive the incorrect

More information

Lower Adjuster Small Black Header Sensor Reversed

Lower Adjuster Small Black Header Sensor Reversed Parts List for Combine Quantity by Model Early Late Early Late Note: Indented items indicate parts included M M M M M M in an assembly listed above F F F F F F 7 7 8 8 8 8 5 6 5 5 6 6 Part Name/Description

More information

Instruction Kit Gleaner K2, K3, F2, F Flow Sensor K2-F

Instruction Kit Gleaner K2, K3, F2, F Flow Sensor K2-F Parts List for Combine NOTE: Indented items indicate parts included In an assembly listed above. Quantity by Model Part Name/Description Part No. K2 F2 Instruction Kit 2005300-1 1 1 Flow Sensor K2-F2 2000292

More information

Clutch Installation Case IH 1200 row unit

Clutch Installation Case IH 1200 row unit Ag Leader Technology SeedCommand NOTE: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity 4 row clutch installation kit Case IH 1200 Model year

More information

Part Name/Description Part No

Part Name/Description Part No Parts List for Combine Note: Indented items indicate parts included in an assembly listed above Quantity by Model Part Name/Description Part No. 4425 4435 Instruction Kit JD 4425-4435 2005100-2 1 1 Moisture

More information

Combine Kit Parts List New Holland Late TR89, Late TR99 (Yield Monitor Ready)

Combine Kit Parts List New Holland Late TR89, Late TR99 (Yield Monitor Ready) Combine Kit Parts List Note: Indented items indicate parts included Quantity by Model in an assembly listed above Late Late TR TR Part Name/Description Part No. 89 99 Instruction Kit NH YM Ready TR89,

More information

Ag Leader Technology. Parts List for Combine MF , 8780, White 9700

Ag Leader Technology. Parts List for Combine MF , 8780, White 9700 Parts List for Combine Quantity by Model Note: Indented items indicate parts included W in an assembly listed above 8 8 8 8 H 5 5 5 7 I 6 7 9 8 T Part Name/Description Part No. 0 0 0 0 E Instruction Kit

More information

NOTE: Indented items indicate parts included in an assembly listed above. Early* Late** M3 M3 Part Name/Description Part No.

NOTE: Indented items indicate parts included in an assembly listed above. Early* Late** M3 M3 Part Name/Description Part No. Parts List Gleaner L2, L3, M2, M3 NOTE: Indented items indicate parts included in an Quantity by Model assembly listed above. Early* Late** M3 M3 Part Name/Description Part No. M2 L2 L3 L3 Instruction

More information

RAM Rail Mount Kit RAM 201UD 5 Arm RAM 2461U Base RAM 235U Base, Double U-Bolt

RAM Rail Mount Kit RAM 201UD 5 Arm RAM 2461U Base RAM 235U Base, Double U-Bolt Note: Indented items indicate parts included in an assembly listed above. Part Name/Description Part Number Quantity Direct Command Kit 4100514 1 Installation Instructions 2005690 1 CAN Y-Splice 4000137

More information

Flow Sensor Gleaner N5-R Flow Sensor Gleaner R40, R

Flow Sensor Gleaner N5-R Flow Sensor Gleaner R40, R Parts List for Combine Note: Indented items indicate parts included Quantity by Model in an assembly listed above Early Late N N N N N N R R R R R R R Part Name/Description Part No. 5 6 7 5 6 7 5 6 7 40

More information

Flow Sensor Deflector Deflector

Flow Sensor Deflector Deflector Parts List of Combine Kit Note: Indented items indicate parts included Quantity by Model in an assembly listed above Early Models* 9 9 9 4 5 6 0 0 0 Part Name/Description Part No. 0 0 0 Instruction Kit

More information

Ag Leader Technology InSight/Ag Leader Integra. OptRx OptRx Remote Sensor Kit

Ag Leader Technology InSight/Ag Leader Integra. OptRx OptRx Remote Sensor Kit : Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Master Module Kit 4100804 1 Master Module 4001821 1 Cable - Master 4001904-10 1 Cable - CAN

More information

ISOBUS Down Force Hydraulics Kinze

ISOBUS Down Force Hydraulics Kinze Important Notices Please carefully follow these step-by-step instructions. If you have questions, contact at 515-232-5363 x 1. Direction words (LEFT and RIGHT) are commonly used when describing an installation

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INDUSTRIES, LLC. INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS KUBOTA GRAND L 40 SERIES HARD SIDED CAB ENCLOSURE (p/n 1KGL4AS) This Curtis Cab is designed and manufactured for use only as

More information

Assembly Instructions

Assembly Instructions Assembly Instructions Part Number Description Model Approx. Assembly Time 99994-0903 Windshield Wiper Kit Mule SX 1 Hour WARNING Improper installation of this accessory could result in an accident causing

More information

Part Name/Description Part No. PF3000 PF 3000 Pro U-Bracket Short Bracket PF3000 Pro

Part Name/Description Part No. PF3000 PF 3000 Pro U-Bracket Short Bracket PF3000 Pro Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part No. PF3000 PF 3000 Pro U-Bracket Short 2000105-2 1 PFadvantage Bracket PF3000 Pro 2000773 1 Cable Kit

More information

Rear Vision System Liftgate Emblem Camera for Aftermarket Display Ford Flex (Kit part number )

Rear Vision System Liftgate Emblem Camera for Aftermarket Display Ford Flex (Kit part number ) Rear Vision System Liftgate Emblem Camera for Aftermarket Display 2009-2012 Ford Flex (Kit part number 1008-6509) Kit Contents: Liftgate Emblem Mount with Camera Chassis Harness with RCA (Note: In some

More information

Please read thoroughly before starting installation and check that kit contents are complete.

Please read thoroughly before starting installation and check that kit contents are complete. Rear Vision System Mirror Display 2013-Current Ram (Kit part number 1009-9518) Please read thoroughly before starting installation and check that kit contents are complete. Items Included in the Kit: Rear

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Rear Vision System Tailgate Emblem Camera Mirror Display 2009-Current Ford F-150 and 2010-Current Super Duty (Kit part number 1008-9527) Kit Contents: Mirror Tailgate Emblem Mount with Camera Interior

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Rear Vision System Liftgate Emblem Camera Mirror Display 2009-2012 Ford Flex (Kit part number 1008-9527) Kit Contents: Mirror Liftgate Emblem Mount with Camera Interior (shorter) Harness Chassis (longer)

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Rear Vision System Tailgate Emblem Camera Aftermarket Display 2009-Current Ford F-150 and 2010-Current Super Duty (Kit part number 1008-6509) Kit Contents: Tailgate Emblem Mount with Camera Chassis Harness

More information

Brake and Tail Light Kit Workman 1100/2100 and Twister Utility Vehicles

Brake and Tail Light Kit Workman 1100/2100 and Twister Utility Vehicles Form No. 5-90 Brake and Tail Light Kit Workman 00/00 and Twister Utility Vehicles Part No. 0 6697 Installation Instructions Important Before installing this kit, you must have Wiring kit number 99 79 installed

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. A, p. of 0 INSTALLATION & OWNER S MANUAL MASSEY FERGUSON GC2400 cab kit p/n MFGC2400 Installation Instructions The contents of this envelope are the property of the owner. Be sure to leave with the

More information

A CAB KIT (Shown with GLASS DOORS KIT A-11859)

A CAB KIT (Shown with GLASS DOORS KIT A-11859) Cab Installation Instructions for John Deere One Series, 1023E, 1025R and 1026R Model Series A-11976 CAB KIT (Shown with GLASS DOORS KIT A-11859) FOR USE WITH OPTIONAL KITS; A-11859 GLASS DOORS WITH NON-OPENABLE

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Rear Vision System Tailgate Handle Camera Mirror Display 2004-2014 Ford F-150 and 2008-2015 Ford Super Duty (Kit part numbers 9002-9521) Kit Contents: Mirror Tailgate Handle with camera and harness Interior

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory S P/N 08V67-SJC-101 Application 2010 RIDGELINE Publications No. AII 42117 Issue Date AUG 2009 PARTS LIST Back-up sensor harness 3 Wire ties with small clip (2 Not used)

More information

GPS AutoSteer System Installation Manual

GPS AutoSteer System Installation Manual GPS AutoSteer System Installation Manual Supported Vehicles Case IH Vehicles Case 2577 Combines Case 2588 Combines Accuguide Ready PN: 602-0233-01-A LEGAL DISCLAIMER Note: Read and follow ALL instructions

More information

JODALE PERRY. Parts List & Mounting Instructions. Jacobsen HR9016 JDP BUILT FOR LIFE

JODALE PERRY. Parts List & Mounting Instructions. Jacobsen HR9016 JDP BUILT FOR LIFE JODALE PERRY Parts List & Mounting Instructions Jacobsen HR9016 JDP BUILT FOR LIFE Jacobsen HR9016 Mounting Instructions Standard Parts 1 - LH Rear Mounting Bracket 1 - RH Rear Mounting Bracket 1 - Front

More information

29048, 29049, 29050, 29051, 29052, 29053, 29054,

29048, 29049, 29050, 29051, 29052, 29053, 29054, April 15, 2014 Lit. No. 29225, Rev. 11 29048, 29049, 29050, 29051, 29052, 29053, 29054, 29400 5 HARNESS KIT 3 PORT ISOLATION MODULE LIGHT SYSTEM w/2 PLUG SYSTEM HARNESSES Installation Instructions Read

More information

CSA CERTIFIED Conforms to UL 507

CSA CERTIFIED Conforms to UL 507 Installation tion Instructions Please read and save these instructions! TURBO/MAXX12 Volt All Weather RV Ventilator Fans P/N 00-965001 Deluxe Model 1200T WITH THERMOSTAT P/N 00-965007 Standard Model 3550

More information

General Information. Notations and Conventions. Compatibility Check. Kit Description. Call-Outs. Part Lists Great Plains Manufacturing, Inc.

General Information. Notations and Conventions. Compatibility Check. Kit Description. Call-Outs. Part Lists Great Plains Manufacturing, Inc. Part Lists Great Plains Manufacturing, Inc. 1 Installation Instructions Loup Shaft Monitor Used with Drill models: Compatible with most 1995 and later, two- and three-box drills with 5 8 -inch square main

More information

P/N Deluxe Model 1200T WITH THERMOSTAT P/N Standard Model 3550 WITHOUT THERMOSTAT

P/N Deluxe Model 1200T WITH THERMOSTAT P/N Standard Model 3550 WITHOUT THERMOSTAT Read and Save These Instructions From MaxxAir Vent Corporation TURBO/ MaxxAir the leader in RV ventilation 215120 CSA approved. Complies with UL507 TURBO/MAXX 12 Volt Installation Instructions P/N 00-965001

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory S P/N 08V67-SJC-101 Application 2012 RIDGELINE Publications No. AII 12006 Issue Date NOV 2011 PARTS LIST Back-up sensor harness 3 Wire ties with small clips (2 Not used)

More information

KK-K9-F16-K INSTALLATION INSTRUCTIONS K9 Kit for FORD EXPLORER (Retail Model Vehicle with OEM Center Shifter Console)

KK-K9-F16-K INSTALLATION INSTRUCTIONS K9 Kit for FORD EXPLORER (Retail Model Vehicle with OEM Center Shifter Console) KK-K9-F16-K INSTALLATION INSTRUCTIONS K9 Kit for 2011-2016 FORD EXPLORER (Retail Model Vehicle with OEM Center Shifter Console) TOOLS Needed: Phillips Screw Driver Power Drill with Drill Bits Trim panel

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 38137-38714 Accessory HandsFreeLink 2008 ODYSSEY Issue Date JAN 2008 PARTS LIST Attachment Kit P/N 08E02-SHJ-100B trim Fuse label Fuse

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. C p. 1 of 21 INSTALLATION & OWNER S MANUAL F5205 HARD SIDED CAB KIT INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner. Be sure to leave with the owner when

More information

AUDIO KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com.

AUDIO KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com. AUDIO KIT P/N 2882696 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation

More information

29048, 29049, 29050, 29051, 29052, 20953, 29054,

29048, 29049, 29050, 29051, 29052, 20953, 29054, July 15, 2008 Lit. No. 29225, Rev. 06 29048, 29049, 29050, 29051, 29052, 20953, 29054, 29400-2 HARNESS KIT 3-PORT ISOLATION MODULE LIGHT SYSTEM w/2-plug SYSTEM HARNESSES Installation Instructions Read

More information

Part Number: TAV-713 TOYOTA AVALON LED DRL

Part Number: TAV-713 TOYOTA AVALON LED DRL Part Number: TAV-713 Kit Contents Item # Quantity Reqd. Description 1 2 DRL s bezels w/led DRL 2 1 Driver Box 3 1 Harness bag 4 1 User s card 5 1 Cushion pad 6 1 Switch 7 2 Drill Jigs Hardware Bag Contents

More information

TOYOTA FJ CRUISER 2007 AUXILIARY LIGHTS Preparation

TOYOTA FJ CRUISER 2007 AUXILIARY LIGHTS Preparation TOYOTA FJ CRUISER 2007 AUXILIARY LIGHTS Preparation Part Number: PT297-35061 Kit Contents Item # Quantity Reqd. Description 1 2 Driving Lamp Assembly 2 1 Switch Harness 3 1 Lamp Harness 4 2 Stone Shield

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS MASSEY FERGUSON TGX SERIES SOFT SIDED CAB ENCLOSURE (p/n MFTGXSS) This Curtis Cab is designed and manufactured for use only as reasonable weather

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Rear Vision System Aftermarket and Factory 5.0, 8.4 and 6.1 MyGig Touch Screen Display (Factory Display requires Chrysler/Dodge dealer to activate) 2009 Current* Dodge Ram (Kit part number 1009-6503) *NOTE:

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL V5008 Kubota RTV 72 Snow Blade The contents of this envelope are the property of the owner. Be sure to leave with the owner when installation is complete. IMPORTANT: Please

More information

GPS AutoSteer System Installation Manual

GPS AutoSteer System Installation Manual GPS AutoSteer System Installation Manual John Deere Track Supported Models 8295RT 8320RT 8345RT PN: 602-0255-01-A LEGAL DISCLAIMER Note: Read and follow ALL instructions in this manual carefully before

More information

WPS-104 Heater Installation Instructions For 500EFI, 700 XP, & Crew Applications

WPS-104 Heater Installation Instructions For 500EFI, 700 XP, & Crew Applications WPS-104 Heater Installation Instructions For 500EFI, 700 XP, & Crew Applications ORDER OF INSTALLATION FOR A COMPLETE ENCLOSURE OF A RANGERWARE WPS (Weather Protection System) IS AS FOLLOWS: 1. Heater

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Honda Dealer: Please give a copy of these instructions to your customer. PARTS LIST (15) (8) (12) (14) (13) (10) (11) (18) (17) (1) Accessory Application Publications No. TRX500FA/FGA

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 9002-6513 Rear Vision System W/ Zoom Aftermarket and Factory 8.4 Touch Screen Display (Factory Display requires Chrysler/Dodge dealer to activate) 2009 2012 RAM (Part B) 2013 Current RAM (Part A) NOTE:

More information

29048, 29049, 29050, 29051, 29052, 29053, 29054,

29048, 29049, 29050, 29051, 29052, 29053, 29054, April 15, 2014 Lit. No. 29206, Rev. 11 29048, 29049, 29050, 29051, 29052, 29053, 29054, 29400 5 HARNESS KIT 3 PORT ISOLATION MODULE LIGHT SYSTEM w/3 PLUG SYSTEM HARNESSES Installation Instructions Read

More information

GPS AutoSteer System Installation Manual

GPS AutoSteer System Installation Manual GPS AutoSteer System Installation Manual Supported Vehicles MacDon M150 M200 PN: 602-0232-01-A LEGAL DISCLAIMER Note: Read and follow ALL instructions in this manual carefully before installing or operating

More information

TOYOTA TACOMA TVIP V5

TOYOTA TACOMA TVIP V5 Preparation Part Number: PT398-35090 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 Security ECU 3 1 GBS ECU 4 1 Status Monitor/Microphone 5 2 Warning Labels (English) 6 2 Warning

More information

850 TETHER SWITCH KIT

850 TETHER SWITCH KIT 850 TETHER SWITCH KIT P/N 2883823 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain

More information

SCION xb 2004 SECURITY (V5) Section I Installation Preparation. Part Number:

SCION xb 2004 SECURITY (V5) Section I Installation Preparation. Part Number: Section I Installation Preparation Part Number: 08586 52960 Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 Mounting Bracket 3 1 GBS ECU 4 1 Security

More information

PRODUCT: Install Instructions, MV-1 C/O Std, With Aux Fan RELEASE DATE: 2/28/14 REVISION DATE: 9/30/2014 PART NUMBER: Rev C

PRODUCT: Install Instructions, MV-1 C/O Std, With Aux Fan RELEASE DATE: 2/28/14 REVISION DATE: 9/30/2014 PART NUMBER: Rev C Parts List (1) 01 000 027 Switch, 4 Position Blower (1) 04 000 007 Hose, 1/2 ID Drain, 6 (1) 01 000 087 Harn, Resistor (1) 04 000 078 Tube, Convo 1/2 x 24 (2) 01 000 136 Relay, 40 Amp (1) 04 000 015 Hose,

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. E p. of 3 INSTALLATION & OWNER S MANUAL V446 Front Cab Kit and V446 Rear Cab Kit for RTV 40 INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner. Be sure to leave

More information

Installation Guide CLAAS Lexion Combines with 9 inch Elevators

Installation Guide CLAAS Lexion Combines with 9 inch Elevators Installation Guide CLAAS Lexion Combines with 9 inch Elevators 955614_01 4/17 1 Table of Contents System Overview 3 Quick Start Guide 4 Flow Sensor Installation 5 Hydraulic Elevator Adjustment Kit Installation

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory REMOTE ENGINE STARTER SYSTEM Application 2010 CIVIC 4-DOOR Publications No. AII 42460 Issue Date AUG 2009 PARTS LIST Remote Engine Starter Unit Kit P/N 08E91-E22-100B

More information

INSTALLATION INSTRUCTIONS. Rear Vision System Aftermarket Display 2009-Current Dodge Ram (Kit part number )

INSTALLATION INSTRUCTIONS. Rear Vision System Aftermarket Display 2009-Current Dodge Ram (Kit part number ) Rear Vision System Aftermarket Display 2009-Current Dodge Ram (Kit part number 1009-6503) Kit Contents: Chassis Harness with RCA (Note: In some cases a RCA extension may be required to connect to your

More information

29048, 29049, 29050, 29051, 29052, 29053, 29054,

29048, 29049, 29050, 29051, 29052, 29053, 29054, May 1, 2018 Lit. No. 29206, Rev. 13 29048, 29049, 29050, 29051, 29052, 29053, 29054, 29400 7 HARNESS KIT 3 PORT ISOLATION MODULE LIGHT SYSTEM w/3 PLUG SYSTEM HARNESSES Installation Instructions Read this

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL INSTALLATION INSTRUCTIONS KAWASAKI MULE 4000 TRANS 4 FRONT CAB KIT (p/n: KAF40T-001WA and p/n: KAF40T-001BA) NOTE: Hard sided doors, soft sided doors, and rear cab are sold

More information

GPS AutoSteer System Installation Manual

GPS AutoSteer System Installation Manual GPS AutoSteer System Installation Manual Supported Vehicles Agco Gleaner Combines R65 R66 R75 R76 PN: 602-0288-01-A LEGAL DISCLAIMER Note: Read and follow ALL instructions in this manual carefully before

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Rear Vision System Mirror Display Dodge Ram Kit Contents: Instruction Sheets Template Chassis Harness Endgate Handle with Camera Wire Ties (Qty: 17) Bottle of ZTech Plug for Non-Locking Endgates (Optional)

More information

Detroit Speed, Inc. Selecta-Speed Wiper Kit Corvette P/N:

Detroit Speed, Inc. Selecta-Speed Wiper Kit Corvette P/N: Detroit Speed, Inc. Selecta-Speed Wiper Kit 1963-67 Corvette P/N: 121620 A downpour of rain will no longer hinder your ability to clearly see the road. The Detroit Speed Selecta-Speed Wiper Kit provides

More information

Safe-T-element Installation Instructions

Safe-T-element Installation Instructions Safe-T-element Installation Instructions For: PTI STEZA (2x2 Burner Configuration) & PTI STEZB (3x1 Burner Configuration) Revision K (May. 3 2012) TABLE OF CONTENTS 1. PREPARATION... 3 1.1 General Safety

More information

TOYOTA YARIS HATCHBACK INTERIOR LIGHT UPGRADE Preparation

TOYOTA YARIS HATCHBACK INTERIOR LIGHT UPGRADE Preparation Preparation Part Number PTS21-52062-08 NOTE: Part number of this accessory may not be the same as the part number show Kit Contents Item # Quantity Reqd. Description 1 1 12 Light Guide 2 1 7 Light Guide

More information

YARIS 4-DOOR 2007 INTERIOR LIGHT UPGRADE

YARIS 4-DOOR 2007 INTERIOR LIGHT UPGRADE Document # 3999 4/26/06 4-DOOR 2007 INTERIOR LIGHT UPGRADE Preparation Part Number: 00016-52060 Code: IL1 Kit Contents Item # Quantity Reqd. Description 1 1 12 Light Guide 2 1 7 Light Guide 3 1 Hardware

More information

INSTALLATION INSTRUCTIONS. Rear Vision System Aftermarket Display 2009-Current Dodge Ram (Kit part number )

INSTALLATION INSTRUCTIONS. Rear Vision System Aftermarket Display 2009-Current Dodge Ram (Kit part number ) Rear Vision System Aftermarket Display 2009-Current Dodge Ram (Kit part number 1009-6503) Kit Contents: Chassis Harness with RCA Endgate Handle with Camera 1 bag containing: Wire Ties (Qty: 17) Bottle

More information

JOHN DEERE GATOR SWITCH PANEL INSTRUCTIONS FITS 1GTRXUV2 AND 1GTRXUV4 CABS (p/n: 1XUVSP)

JOHN DEERE GATOR SWITCH PANEL INSTRUCTIONS FITS 1GTRXUV2 AND 1GTRXUV4 CABS (p/n: 1XUVSP) P. 1 of 5 JOHN DEERE GATOR SWITCH PANEL INSTRUCTIONS FITS 1GTRXUV2 AND 1GTRXUV4 CABS (p/n: 1XUVSP) Note: Harness Extension Kit Required for 4 Passenger (p/n: 1XUV4WHEK) This manual is the property of the

More information

Installation Manual. AutoSteer. Gleaner Combine. AutoGuide 2 Steer Ready. Supported Models A66 A76 R66 R76 S67 S77 PN: A

Installation Manual. AutoSteer. Gleaner Combine. AutoGuide 2 Steer Ready. Supported Models A66 A76 R66 R76 S67 S77 PN: A Installation Manual AutoSteer Gleaner Combine AutoGuide 2 Steer Ready Supported Models A66 A76 R66 R76 S67 S77 PN: 602-0312-01-A LEGAL DISCLAIMER Note: Read and follow ALL Instructions in this manual carefully

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS [1] Description: Tow Hitch Wire Harness Kit [2] Application: Nissan Rogue Note: Tow Harness application is limited to specific vehicle option packages that include tow harness

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS KUBOTA GRAND L 30 SERIES HARD SIDED CAB ENCLOSURE (p/n 1KU3AS) SOFT SIDED CAB ENCLOSURE (p/n 1KU3SS) This Curtis Cab is designed and manufactured

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory HITCH Application 2012 CROSSTOUR Publications No. AII 46198 Issue Date JULY 2011 PARTS LIST Trailer Hitch Kit P/N 08L92-TP6-101 Upper spacer A (5 mm) (Some are not used.)

More information

INSTALLATION INSTRUCTIONS Accessory Application Publications No. 2010 CIVIC All 42479 2- AND 4-DOOR P/N 08E10-SNA-110 Issue Date AUG 2009 NOTE: The interior illumination lights cannot be installed on 2-door

More information

LPE C5 Battery Relocation Kit

LPE C5 Battery Relocation Kit LPE C5 Battery Relocation Kit The LPE C5 Corvette battery relocation kit improves vehicle weight distribution by moving weight to the rear of the vehicle. The improved weight distribution increases traction

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. D, p. 1 of 14 INSTALLATION & OWNER S MANUAL Bobcat CT 230 and KIOTI CK30 cab kit with hard doors and soft rear curtain p/n 1BCT230 & 1KTCK30 The contents of this envelope are the property of the owner.

More information

SPECIAL INSTALLATION INSTRUCTIONS

SPECIAL INSTALLATION INSTRUCTIONS SPECIAL INSTALLATION INSTRUCTIONS WARN 4X FLARES FRONT AND REAR '98 TOYOTA HILUX DUAL-CAB As you read these instructions, you will see NOTES, CAUTIONS and WARNINGS. Each message has a specific purpose.

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Accessory Application Publication No. INSTALLATION INSTRUCTIONS WINCH MOUNT KIT P/N 08L77-HL3-A00 SXS700M4/M2 Honda Dealer: Please give a copy of these instructions to your customer. MII 14607 Issue Date

More information

C15C C15C. Page 1 of 20

C15C C15C. Page 1 of 20 2 x Lid Front Hinge 1135 8 x M8 Bolt 8 x M8 Washer (3mm Thick) 4 x M6 Large washers 4 x M6 Spring washers 4 x M6 x 40mm Bolts 6 x M6 20mm Bolts 6 x M6 Washers 20 x Screws 2 x Lid mount gas strut bracket

More information

2015 Mustang Lightbar (All Models) CDC#

2015 Mustang Lightbar (All Models) CDC# 2015 Mustang Lightbar (All Models) CDC# 1511-7000-01 Components: 1 CDC Lightbar Note: READ instructions before starting installation!!! CDC Part# Driver side bracket 0511-6001-05 Passenger side bracket

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 26031 2004 ODYSSEY Issue Date AUG 2003 NOTE: You cannot install the subwoofer in a vehicle equipped with both an under seat Navigation

More information

Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060

Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060 Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060 Great Plains Part #891-561C (Gandy Part #6245DS-GP) For Great Plains Turbo-Max 2400, 3000, 3500 & 4000 Models 45

More information

Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060

Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060 Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060 Great Plains Part #891-622C (Gandy Part #6245DS-TT) Great Plains Turbo-Till & Turbo-Chopper 2400/3000 Models 45

More information