Variety of mounting methods. UL, CUL, and CSA listed for general and hazardous locations

Size: px

Start display at page:

Download "Variety of mounting methods. UL, CUL, and CSA listed for general and hazardous locations"

Jeffry Ward
6 years ago
Views:

PREDATOR The Predator floodlight offers versatility, efficiency, and performance, which provides a unique solution

With the Predator, Holophane continues its legacy of utilizing technology to develop creative and innovative

Because the Predator is capable of generating wide, narrow, and spot distributions and is able to withstand harsh

1 PREDATOR The Predator floodlight offers versatility, efficiency, and performance, which provides a unique solution to a variety of lighting needs. With the Predator, Holophane continues its legacy of utilizing technology to develop creative and innovative lighting solutions. Because the Predator is capable of generating wide, narrow, and spot distributions and is able to withstand harsh environmental extremes, it can be used in a range of diverse applications. Flexibility in mounting positions is maximized with its 360 yoke. The quick disconnect removable door, which includes all electrical components, can be replaced in 60 seconds, resulting in decreased costs and inconvenience of downtime

PREDATOR Variety of distributions Extended component life Variety of mounting methods UL, CUL, and CSA listed for general and hazardous locations

Transverse elliptical fluting minimizes redirected energy through the arc tube and provides streak and striation free illumination.

Simplifies maintenance through 60 second replacement and decreases costs through minimal downtime.

2 PREDATOR Variety of distributions Extended component life Variety of mounting methods UL, CUL, and CSA listed for general and hazardous locations Features and Benefits Unique fluted reflector Produces the maximum amount of light per input watt with optimum uniformity. Transverse elliptical fluting minimizes redirected energy through the arc tube and provides streak and striation free illumination. Unitized electrical assembly Quick disconnect fixture door includes ballast and socket. Simplifies maintenance through 60 second replacement and decreases costs through minimal downtime. Corrosion resistance Construction consists of low copper (360.1 alloy) aluminum castings, phosphate pretreatment, 2 4 mil TGIC polyester powder paint, and hollow core high temperature silicone gaskets. 40 C UL listing Extends ballast and capacitor life 100% if operated in 25 C (77 F) average ambients.

BRIDGES PAPER MILLS POWER PLANTS PETROCHEMICAL PLANTS WASTEWATER FACILITIES BUILDING FACADES PARKING LOTS OUTDOOR SECURITY Application versatility Protected HPS starter Protects starter and ballast

Stainless steel exposed hardware Provides long useful life in harsh locations. Low Energy Use Holophanemanufactured ballasts provide highest lamp wattage with lowest input watts.

3 BRIDGES PAPER MILLS POWER PLANTS PETROCHEMICAL PLANTS WASTEWATER FACILITIES BUILDING FACADES PARKING LOTS OUTDOOR SECURITY Application versatility Protected HPS starter Protects starter and ballast from damage when lamp fails. Mounting versatility 360 yoke for 100% flexibility. Knuckles for 2 and 4 inch tenons. Junction box mount. Stainless steel exposed hardware Provides long useful life in harsh locations. Low Energy Use Holophanemanufactured ballasts provide highest lamp wattage with lowest input watts. Optional low loss ballasts in W MH reduce losses by an additional 10 to 20 watts per fixture. Normal environment - UL/ CUL 1598 Suitable for Wet Locations Harsh environment - UL 844 Class I, Division 2 Class II, Division 1 & 2 (small Predator only) Class III, Division 1 & 2 (small Predator only) CSA Certified UL 1598A* Marine Outside *There are 4 levels of marine listings defined by UL 1598A, with Marine Outside having the most severe requirements. PREDATOR

4 PREDATOR Predator CI Fixtures Class I, Division 2 Groups A, B, C, D Hazardous Locations Predator has been designed and tested in accordance with UL Standard 844. Therefore, it complies with Article 501.9(B) (2) of the National Electrical Code, specifically, tested in order to determine the marked operating temperature or temperature range. Predator CII Fixtures Class II, Division 1 & 2 Groups E, F, G Class III, Division 1 & 2 Hazardous Locations Predator has been designed and tested in accordance with UL Standard 844 to be dust-ignitionproof as required for Class II applications. The fixture will exclude dust from the inside of the enclosure and will function at full rating without developing surface temperatures high enough to cause excessive dehydration or gradual carbonization of any organic dust deposits that may build up. Maximum surface temperatures will not exceed 200 C (392 F) Group E and Group F or 165 C (329 F) Group G under normal conditions of use. All temperature classifications are for 40 C ambient temperature. Table 1 lists the UL tested maximum operating temperatures for lamp type and wattage based on operation in the specific ambient for which it is approved. Please refer to the Maximum Surface Temperature Code Table of the NEC. Table 1 Predator Temperature Classification for Class I, Division 2, Hazardous Locations and Class II, III, Division 1 & 2, Hazardous Locations. Class I, Division 2 Class II, III, Divisions 1 & 2 Lamp Type Maximum Mounting Lamp Type Maximum Mounting & Wattage Temp. C Code Restriction & Wattage Temp. C Group Code Restriction 50W HPS 163 T3B 1 50W HPS 163 E,F,G T4A 2 70W HPS 178 T3A 1 70W HPS 178 E,F,G T3C 2 100W HPS 221 T2C 1 100W HPS 221 E,F,G T3C 2 150W HPS 55V 272 T2A 1 150W HPS 55V 272 E,F,G T3C 3 150W HPS 100V 244 T2B 1 150W HPS 100V 244 E,F T3A 3 250W HPS * 1 150W HPS 100V 244 E,F,G T3B 4 400W HPS 388 T W MH 306 E,F T W MH * 1 175W MH 306 E,F,G T3C 4 250W MH * 1 100W MV 247 E,F,G T3C 2 400W MH * 1 175W MV 313 E,F T W MV 247 T2B 1 175W MV * 1 250W MV 383 T W MV 383 T1 1 1 Mounting restricted to lamp vertical, base down, +/ Mounting restrictions are referenced to lamp vertical, base down, 25 back of vertical to 90 lens down. 3 Mounting restrictions are referenced to lamp vertical, base down, vertical to 90 lens down. 4 Mounting restrictions are referenced to lamp vertical, base down, 90 lens down only. * UL Standards covering hazardous locations (UL 844) Paragraph permits fixtures under Class I, Division 2, which are between 300 C and 450 C to be marked with 325, 350, 375, 400, 425, 450 to indicate actual maximum temperature. (e.g. Code 325 = 325 C) Note: Maximum temperatures for lamp type and wattage vary between Class I and Class II & III. Class I is established based upon the maximum temperature inside or outside the luminaire. Class II and III maximum temperature is based upon external surface temperature. Class III fixtures will exclude fibers or flyings from the inside of the enclosure and will function at full rating without developing surface temperature high enough to cause excessive dehydration or gradual carbonization of accumulated fibers or flyings. NEC Requirements UL Standard 844, File no. E12267

5 Performance Specification Table 2. Photometric Data Vertical NEMA Beam Total Max. Photometric Source Watts Distribution Beam 1 Efficiency 2 Efficiency Candela Test # HPS 50 Narrow 7 x % 71.0% IES Wide 7 x % 71.7% IES 70 Narrow 7 x % 70.1% IES Wide 7 x % 70.9% IES 100 Narrow 7 x % 69.5% IES Wide 7 x % 70.2% IES 150 Narrow 7 x % 69.7% IES Wide 7 x % 69.9% IES Spot 4 x % 72.4% IES 250 Narrow 7 x % 73.3% IES Wide 7 x % 73.4% IES Spot 6 x % 75.2% IES 400 Narrow 7 x % 72.3% IES Wide 7 x % 72.8% IES Spot 6 x % 74.5% IES MH 175 Narrow 7 x % 73.2% IES Wide 7 x % 73.4% IES Spot 4 x % 80.3% IES 250 Narrow 7 x % 74.9% IES Wide 7 x % 75.9% IES Spot 6 x % 77.8% IES 400 Narrow 7 x % 76.2% IES Wide 7 x % 75.7% IES Spot 5 x % 79.0% IES DX MV 250 Narrow 7 x % 69.0% IES Wide 7 x % 68.3% IES Spot 6 x % 71.6% IES 400 Narrow 7 x % 64.6% IES Wide 7 x % 64.0% IES Spot 6 x % 68.0% IES 1 NCHA beam based on field angle 2 Beam efficiency based on field angles.field angles are used because they more accurately represent lumens in beam Fixture shall be Holophane catalog number. Mechanical Construction: The housing shall be die cast low copper (360.1 alloy) aluminum finished with a 7-stage pretreatment and an electrostatically applied 2-4 mil coat of polyester powder paint. The finish shall withstand a 160 inch-pound impact measured with a standard Gardner Impact Tester. It shall have passed a 1000 hour salt spray test as specified by ASTM B-117. It shall exhibit no cracking or loss of adhesion from a 180 bend over a 1/8 inch mandrel diameter per ASTM D522. All external screws shall be captive and be Type 316 stainless steel. The yoke shall be either AISI Type 316 stainless steel or zinc electroplated and yellow chromate finished cold rolled steel. The yoke shall be capable of being rotated 360 about the fixture for top, bottom, or back mounting. The door shall be hinged to provide easy access during lamping and shall be secured to the fixture while open. The door assembly shall include mechanical stops to assure proper compression of the gasket. The yoke mounted fixture shall have a threaded entry to accommodate 1/2 NPT conduit or connector. When the junction box mount fixture is used, a 1 NPT entry shall be provided. Water-tightness: No water shall enter the fixture when exposed to a solid stream of water from 3 GG40 brass spray nozzles - each supplying 12 gallons per minute at 100 PSI. The nozzles shall be 30 inches apart, centered on, and 24 inches from the fixture plane. Three tests shall be conducted for 15 minutes each with the vertical distance of the fixture at 6, 12, and 16 inches above the nozzles. The gasket shall be hollow core, Durometer 60 silicone, and have a 200 C continuous service temperature. It shall have demonstrated no visible deterioration after artificial aging for 96 hours in oxygen at a pressure of 300 pounds per square inch at a temperature of 156 F. Dust-tightness: An enclosure of a fixture for Class II locations shall be exposed for at least six heating and cooling cycles and for at least 30 hours to a circulating dust-air atmosphere to determine that the fixture is dust-ignition-proof with regard to exclusion of dust. There shall be no entrance of the dust into the device as determined by visual examination following the chamber test described. The fixture is to be installed in a test chamber to permit free circulation of the dust-air mixture around the fixture. The test chamber is to be provided with a cover and with dust-air-inlet and - outlet connections. The fixture is to be exposed to the dust-air atmosphere that is to be produced by auxiliary apparatus and introduced into the test chamber. The tests are to be conducted at an ambient temperature of C ( F) and a relative humidity of percent. Grain dust consisting of wheat or com dust, or both, that has passed through a U.S.A. Standard 150-micron (100-mesh) wire cloth is to be used for the dust-air atmosphere if the fixture is for Class II, Group F, Group G, or Groups F and G locations. Magnesium dust, all of which has passed through a U.S.A. Standard 250-micron (60 mesh) wire cloth, 66 percent of which has passed through a 150-micron (100-mesh) wire cloth, and 22 percent of which has passed through a 75-micron (200-mesh) wire cloth, is to be used for the dust-air atmosphere if the fixture is for Class II, Group E, Groups E and F, Groups E and G, or Groups E, F, and G locations. Quick Disconnect Electrical: The fixture door shall contain all ballast components, including the socket, and be designed for fast removal as a complete assembly without disturbing aiming. The fixture shall be capable of being changed to a different wattage, voltage, or lamp source by simple change out of the unitized electrical assembly. Replacement shall take less than 60 seconds. Optical and Socket Assembly: The reflector shall consist of high purity alloy #3002 aluminum of minimum 0.08 thick sheet. Lens shall be 4.5 mm minimum thickness tempered glass. The beam efficiency shall be no less than *. The total efficiency shall be no less than *. Lamp holders shall be porcelain with high temperature 16 ga. wiring. Sockets shall be pulse rated. The screw shell shall be nickel-plated brass with anti-vibration grips. Ballast: Shall be copper wound, high power factor, Lead or Low Loss Lead as specified. Ballasts shall reliably start and operate the lamp in ambient temperatures to minus 40 F. The lamp extinguishing voltage shall be as low as 39% of nominal. Ballast shall provide 100% wattage to the lamp and have a published Ballast Factor of 1.0 per ANSI C82.2. The fixture shall be UL listed for 40 C. When operated at 10 C below rated ambient temperature, ballast insulation and capacitor life shall be extended 100%. The low loss ballast available for watt lamps, if specified, shall have a core of grain oriented M-6 steel to reduce ballast losses 10 to 20 watts per fixture. A protected started for High Pressure Sodium lamps, if specified, shall sense an inoperative lamp and automatically shut down to prevent continuous pulsing and thermal damage to itself and ballast secondary windings. Warranty: The electrical assembly shall be warranted for a period of 5 years and the luminaire for a period of 2 years from the date of shipment. Listing: The fixture shall be UL/CUL 1598 listed for 40 C ambient Suitable for Wet Location. It shall be UL 844 listed for Class I, Division 2; Class II, Division 1 & 2; Class III, Division 1 & 2. It shall be UL 1598A listed for Marine Outside. *Note: See Table 2 for applicable beam efficiency and total efficiency. PREDATOR

PREDATOR Mounting versatility Since the yoke can rotate 360 around the fixture, the Predator can be mounted from below, above, or any intermediate

An optional knuckle fitter, adjustable in 5 increments, can be ordered in lieu of the yoke, or a slip fit adaptor can be supplied as an accessory to the

For ceiling mounting in tunnels or back mounting for sign lighting, a box mount can be supplied in lieu of the yoke to give a 15 tilt from the mounting

1 alloy) die cast aluminum with polyester powder paint. 2 Mounting: 360 swivel of mounting yoke around fixture provides top, bottom, or back mounting.

6 PREDATOR Mounting versatility Since the yoke can rotate 360 around the fixture, the Predator can be mounted from below, above, or any intermediate position. An optional knuckle fitter, adjustable in 5 increments, can be ordered in lieu of the yoke, or a slip fit adaptor can be supplied as an accessory to the yoke for mounting on a 2" tenon. For ceiling mounting in tunnels or back mounting for sign lighting, a box mount can be supplied in lieu of the yoke to give a 15 tilt from the mounting plane. The knuckle fitter, junction box, and slip fit adaptor options are not suitable for hazardous locations Housing: Low copper (360.1 alloy) die cast aluminum with polyester powder paint. 2 Mounting: 360 swivel of mounting yoke around fixture provides top, bottom, or back mounting. 3 Reflector: Unique reflector design eliminates bright streaks, provides uniform illumination, and low surface brightness. 4 5 Tempered glass lens Quick-disconnect removable door: Includes all electrical components, including the socket. Captive stainless steel screws. Door does not distort when fastened. 6 Gasket: Hollow core high temperature silicone gasket. Junction box mount " Tenon pole adaptor Knuckle fitter Mounting Options

7 Ordering Data How to construct a catalog number for Predator Fixture type EXAMPLE: PD 050HP 12 H N 3 G PS Catalog no. Description 1 Luminaire type PD Small Predator (UL 844, UL 1598A, UL/CUL 1598, 40 C wet location) PF Medium Predator (UL 844 and UL/CUL 1598, 40 C wet location) 2 Source and wattage PD 050HP 50W HPS (120 volt only) H 070HP 70W HPS 100HP 100W HPS 15AHP 150W/55V HPS 175MH 175W MH PF 250HP 250W HPS 25LHP 250W HPS, energy saving W 400HP 400W HPS 40LHP 400W HPS, energy saving 250MH 250W MH 25LMH 250W MH, energy saving 40LMH 400W MH, energy saving 250MV 250W MV 400MV 400W MV 3 Voltage volt volt 63.5mm (2.5 ) 31.8mm (1.25 ) volt 25mm (1.0 ) volt volt (Canada only) volt MT Multi-voltage ( volt USA) NA with 050HP, 250 and 400MV 4 VT Vari-tap (120, 277, 347 volt) Only available with 250HP, 250 MH, 400HP UL/CUL listing PD H Class I only (UL 844) J Class I, II, III, and marine outside (UL 844) K Wet location (UL/CUL 1598) L Marine outside (UL 1598A) PF B Class I (UL 844), and marine outside (UL 1598A) K Wet location (UL/CUL 1598) L Marine outside (UL 1598A) 5 Optical N Narrow vertical, wide horizontal beam W Wide vertical, wide horizontal beam S Spot distribution (UL/CUL 1598 & UL 1598A on PD only ) 6 Mounting 1 2 Knuckle fitter (UL/CUL 1598 only) 2 Box mount (UL/CUL 1598 and UL 1598A only) 3 Stainless steel yoke 4 Zinc plated yoke (UL/CUL 1598 only) 5 4 Knuckle fitter (UL/CUL 1598 only) 7 Color G Gray B Bronze K Black (UL/CUL 1598 on PF only) W White (UL/CUL 1598 on PF only) 8 Options and accessories See page 8 51mm (2.0 ) 2X 10.7mm (.422 ) (2) clearance holes for mounting bolts (1) 13.5mm (.53 ) hole for wiring Predator W H D Weight PD lbs. PF lbs. Effective Projected Area (In Ft2) Tilt above Small Predator Medium Predator Nadir EPA EPA D Protractor markings every 15 for a 180 total - 2 places Clearance holes for luminaire mounting Order number Job name PREDATOR

Options and Accessories Wire guard Visor Visor & side shield Catalog no.

visor (UL/CUL 1598 on PF only) L Black side shields (UL/CUL 1598 on PF only) J White side shields (UL/CUL 1598 on PF only) PS Protected starter for HPS units only R 1 Photocontrol receptacle (NEMA

only) F2 Double fuse assembly for 208, 240, or 480 volt (UL/CUL 1598 only) PDWG Wire guard for PD unit PFWG Wire guard for PF unit PDPR12 120V photocontrol (UL/CUL 1598 only) PDPR 208, 240, 277V

8 Options and Accessories Wire guard Visor Visor & side shield Catalog no. Options (factory installed) A Gray top visor C Bronze top visor D Gray side shield (UL/CUL 1598 only) E Bronze side shield (UL/CUL 1598 only) F Black top visor (UL/CUL 1598 on PF only) H White top visor (UL/CUL 1598 on PF only) L Black side shields (UL/CUL 1598 on PF only) J White side shields (UL/CUL 1598 on PF only) PS Protected starter for HPS units only R 1 Photocontrol receptacle (NEMA twistlock) (UL/CUL 1598 on PF only) _ TB 1 Terminal block Accessories (shipped separately) LAMP Ship appropriate lamp as line item F1 Single fuse assembly for 120, 240, 277, or 347 volt (UL/CUL 1598 only) F2 Double fuse assembly for 208, 240, or 480 volt (UL/CUL 1598 only) PDWG Wire guard for PD unit PFWG Wire guard for PF unit PDPR12 120V photocontrol (UL/CUL 1598 only) PDPR 208, 240, 277V photocontrol (UL/CUL 1598 only) PDPR34 347V photocontrol xx 2 2 tenon pole adapter (UL/CUL 1598 only) Notes: 1 Contact TSG 2 Insert GR-Gray, BZ-Bronze, BK-Black, WA-White for xx in catalog number Acuity Lighting Group, Inc. 214 Oakwood Ave., Newark, OH / Holophane Canada, Inc Leslie Street, Suite 208, Richmond Hill, ON L4B 3M4 / Holophane Europe Limited, Bond Ave., Milton Keynes MK1 1JG, England / Holophane, S.A. de C.V., Apartado Postal No. 986, Naucalpan de Juarez, Edo. de Mexico Contact your local Holophane factory sales representative for application assistance, and computer-aided design and cost studies. For information on other Holophane products and systems, call the Inside Sales Service Department at In Canada call or fax Limited Warranty and Limitation of Liability Refer to the Holophane limited material warranty and limitation of liability on this product, which are published in the Terms and Conditions section of the current product digest, and is available from our local Holophane sales representative. Visit our web site at

CRYSTALGLO. Holophane s potted ballast provides good thermal dissipation and sound absorption, for long life and quiet operation.

CRYSTALGLO. Holophane s potted ballast provides good thermal dissipation and sound absorption, for long life and quiet operation. CRYSTALGLO The CrystalGlo luminaire is an innovative, attractive x recessed or surface mounted luminaire for commercial, retail, industrial, school or institutional applications. The drop prismatic glass