FIFO STORAGE SOLUTION
|
|
- Tamsyn Tate
- 5 years ago
- Views:
Transcription
1 N - 2 LGT TRGE LUTN FF TRGE LUTN ccording to the FF rinciple for storage goods are stored First-n and First-ut. n Fifo storage, goods are loaded at the rear side & are picked at the front. ore time saving in goods picking and also reduction of traveling time. ave up to 4% of space by eliminating of gangways. Roller tracks used as gravity to move material towards front without manpower. ncreased roductivity on different locations for loading & unloading. Direct access to the picking on front. Excellent visibility & fast access. TT TRGE FF TRGE pace Reduction Loading rea icking rea Loading rea icking rea pace Reduction TT TRGE FF TRGE omparison of tatic torage & FF torage different items immediately accessible different items immediately accessible Reduction in floor space n FF torage,we access all 48 items at one time against (8 x 6) racks items in the static storage. ß n FF torage, Travel time is % of static storage. ß 8 n FF torage, we save 4% of floor space against static storage ß RK GNG WY RK GNG WY 2 Benefit by FF torage there is no interference of material for loading and unloading on the odular system especially designed to reduce the transportation cost and the process control. ain odule & dd n odule design also available. Roller Tracks can be easily adjusted in every mm or 2.5mm pitch depending upon the Bin Lengths. Levels (helf) can be adjusted depending upon the Bin heights. tandardized storage solution of lastic Bins. FF torage olutions pecial sections designed by etafold for safety storage. Each level can carry between kg to 8 kg depending upon the size. s per ergonomic norms, each bin weight is assumed between 5 to 2 kg with factor of safety as 2. for roller tracks. Five different variants of Roller Tracks are specially designed by etafold. without prior notice. 32 ur policy is of contin
2 FF TRGE LUTN N - 2 LGT TRGE LUTN tandard odule helf Depth art No. Bins Bin on Depth (mm) Name torage BN BN BN ide 4 BN BN hannel 6 BN helf art Name Front ember Back ember Tie ember 7 BN BN BN BN Bin torage ngle Track ( mm pitch) 2 se28 se26 se23 Finish : owder coating : Deep Blue Tie ember : Deep Blue helf, Roller Track : vory Glossy Flange Track ( mm pitch) Front of Bin Height (mm) Depth (mm) roduct ode 5 se283 se2 se27 6 se284 se2 se28 7 se285 se22 se2 8 se286 se23 se2 se287 se24 se2 se288 se25 se22 Rolled Track (2.5 mm pitch) BN ZE BN BN BN BN BN Roller Track* 5 Roller Track (Type-) TRK LENGTH Ø48.5 Ø Rolled Track with Flange Wheel Rolled Track with lain Wheel Wheel pitches for both plain wheel & flange wheel are 5mm Roller Track (Type-) using for odel- Fifo Rack Roller Track (Type-B) TRK LENGTH Ø Ø Track with lain Wheel etallic Roller Track with Flange Wheel 47.4 Flange Track with lain Wheel Wheel pitches for plain wheel are 34/5/68 mm Wheel pitches for flange wheel are 5/68 mm etafold tandard supply 34 mm pitch Roller Track (Type- and Type-B) using for odule- Fifo Rack ade of formed section Track Joinery For longer depth of storage rack, Roller track is joined by track joinery. t helps to multiple joint on roller track. Two types of track joinery are used for 5 dia. 38dia ngle Track *For more details refer roller track roduct No. 5 33
3 N - 2 LGT TRGE LUTN FF TRGE LUTN FF torage Rack with Formed ection (odel - ) 5 Tie ember 6 3 Brake trip for Roller Track helf 4 Red corner ap 2 hoe late Basic omponents. : The frame consist of two uprights, which are connected by bolts & nuts, to the horizontal member & diagonal members. The uprights designed on '' rofile with two sides punching on pitch of mm. Diagonal members are provided to maintain the squareness. 2. hoe plate : hoe plate are provide to facilitates anchoring to floor, with plastic shoe to avoid damage of painted floor. 3. helf : The shelf consist of Front member, Back member, ide '' channel, along with upport '' hannel for heavier loads. Front & Back member specially designed with adjusting of roller tracks of mm / 2.5 mm itch, provides storage of multiple Bin sizes. ide '' channel connected by bolts, nuts to the upright frames. The shelf frame by side '' channel which takes the entire load. ide '' channel joinery also available on longer depth. 4. Red corner ap : rojection of shelf out of frame, helps easy access of bin. These corners are marked by highlighter to avoid any damage to operator. 5. Tie ember : Tie member is connected by bolts, nuts to the two upright frames. To maintain the squareness of the rack. 6. Brake strip for roller track : The brake strips are provided to reduce the traveling speed of the bin. 7. Display : Display on individual racking is also available in 3 plastic folder for suspending on the rack. dvantages. helf djustment is possible at only mm pitch 2. ndividual shelf is adjustable on 4 bolts and nuts. 3. Extension of the shelf is indicated with red highlighter as per the safety norms. without prior notice. 34 ur policy is of contin
4 FF TRGE LUTN N - 2 LGT TRGE LUTN FF torage Rack with Rolled ection (odel - ) 4 Tie ember 5 3 Locking in helf 6 Name late 2 hoe late Basic omponents. : The frame consists of two uprights, are is welded together by horizontal member and diagonal member. The 8 fold bottle section upright made of cold rolled sheet, equally spaced cylindrical slots at 5 mm pitch on upright. 2. hoe plate : hoe plate are provided to facilitate anchoring to floor, with plastic shoe to avoid damage of painted floor. 3. helf : The shelf consists of front member, back member along with support '' channel. Front member, Back member specially designed with adjusting of roller track of 2.5 mm pitch, provides storage of multiple bin sizes. They are welded with connector to take heavier loads. 4. Tie ember : Tie member is inserted into slots maintain the squareness of rack. on both upright frames, to 5. Locking in : Locking provided to each front member, back member and tie member for locking. ne locking pin is suplied for every interlocking connector. 6 Name late : Name plate ('' section) made of steel sheet, with 3 mm (nner to nner) to insert stickers. 7. Display : Display on individual racking is also available in 3 plastic folder for suspending on the rack. dvantages. helf djustment is possible at only 5 mm pitch. 2. Easy to modify each shelf without Bolts. 3. ost heaper than odel Easy to convert into L Base. 5. dvantage in Longer Depth. 35
5 N - 2 LGT TRGE LUTN FF TRGE LUTN FF ain & dd on odule with helf FF ain odule of 4 Levels with Roller Track FF ain odule of Roller Track with Front helf FF ain odule of 3 Levels with etallic Roller without prior notice. 36 ur policy is of contin
6 FF TRGE LUTN N - 2 LGT TRGE LUTN FF ain odule of ngle Track with Top Return over FF ain odule of (2+ Return) Levels with Roller Track FF ain & dd n odule of 5 Levels with Roller Track FF ain & dd n odule of 5 Levels with Roller Track 37
MOLD STORAGE SOLUTION
N - 2 LGT TRGE LUTN LD TRGE LUTN ullout edium Duty odel (Two Upright ystem) RL 55 RL LB-5 / Kg. UDL 6 % pening 5 5 3 ovable + Fix ombination x 5 x 7 2 x 7 roduct ode EL2553 EL2753 EL22753 helf lear Length
More informationMODULAR ASSEMBLY TABLE
N - 2 LGT TRGE LUTN DULR EBLY TBLE Basic odular ssembly Table pplication : Used for Electrical, Electronics, lastic & utomobile ndustries etc. Load apacity : 25 Kg max. UDL on top surface. tructure : odular
More informationWarehousing Solution. Roll-Out Storage Solution. Machine Shop Assembly Line Solution. Auto-Roto Store. Automation Storage Solution
Roll-ut torage achine hop ssembly Line uto-roto tore utomation torage NTRDUTN etafold Engineering vt. Ltd. is an undisputed leader in providing torage s and aterial Handling for many years. t was established
More informationSHELVING PRODUCTS. Maximize Your Storage Space
SHELVING PRODUCTS Maximize Your Storage Space SHELVING UNITS Pre-engineered sections are 36, 42, and 48 wide and 84, 96 and 120 high, with shelves adjustable on 1-1/2 centers. For double row, back-to-back
More informationShelving with Sloped Shelves
Shelving with Sloped Shelves Rousseau shelving with sloped shelves provides superior-quality gravity flow storage that integrates perfectly with other products in our Spider family. This unique product
More informationHi-Tech specially designed components allow for fast and easy assembly.
OPEN SHELVING MEDIUM, HEAVY AND EXTRA HEAVY-DUTY HI-TECH STEEL SHELVING Open Starter Units Include: Two beaded front posts, two angle back posts, one pair of back sway braces, two pair of side sway braces
More informationServer & Network Enclosures
erver & Network Enclosures -Line Enclosure Removable cable entry knockout plates Fully configurable top panel assembly Range of single & double door options with a variety of locking choices Fully adjustable
More information(DNRR Series) Tapped - Front Flange Only ACCESSORIES
Light Duty - Welded (DN Serie FEATUES Suitable for many rack mount application, providing complete acce to equipment Nothing to aemble 2-gauge teel bae & upright channel - welded contruction rovide an
More informationTable of Contents. Quick Installation Guide 2 - Disconnect Switch Installation - Disconnect Handle Installation - Cutting Connecting Rod
ulletin 494V Variable Depth Disconnect Switch Installation Instructions (Cat 494V-DS30; -DSX30 - Series D; 494V-DS; -DSX - Series D) (Cat 494V-DS00; -DSX00 - Series D; 494V-DS00; -DSX00 - Series D) TTENTION:
More informationlifgo 5.4 NEW! The special size variant for heavy loads and long strokes
NW! lifgo 5.4 The special size variant for heavy loads and long strokes LNTNI G lifgo -series Gear rack drives for precise, high-speed requirements lifgo 5 is a modular system of gear rack drives featuring
More informationNRA 800 Series. Overview. Medium Density Closed Rack Solutions
NRA Series Overview NRA Series, Rigid Racks for Servers, Networking, AV, Telecom & Lab application. Racks manufactured out of aluminum profile, formed steel frames & members, individually powder coated
More information(Nominal) L Belt weight (Belt/pin material)
N lastic Modular elt Serie uni M-TT 37% elt material & color W OM-D W in material & color W 6.6 lternative pin material: 6.6 W elt width ermissible tensile force (Nominal) L T Straight Running Nominal
More informationTri-Boro Shelving Features
6Steel Shelving Tri-Boro Shelving Features Tri-Boro Shelving is manufactured in the widest range of sizes available in the industry. When used in combination this array of sizes can meet the most demanding
More informationNAOR 2 Post Series. Overview. Open Rack Solutions. Features
NAOR 2 Post Series Overview NAOR - 2 Post Series are Ultra rigid Racks for high density application for networking / labs / data Centres. These Racks are made of rugged aluminum profiles, individually
More information3.2 lean SL 5 Technical data & dimension sheets lean SL series Technical data
3.2.1 lean SL series Technical data 3.2 lean SL 5 Technical data & dimension sheets 3.2.1 lean SL series Technical data lean SL lean SL double! Make sure that the article number refers to the correct pinion
More informationPOM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE
Datasheet: uni M C EN lastic Modular elt Series uni M C L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: Closed ackflex radius: 65.0 mm (2.6 in) in diameter:
More informationSTEELS WITH HIGH MECHANICAL STRENGTH REINFORCED RIVETING. REINFORCED RESISTANCE to shocks et to misalignment
STANDARD CHAINS - SOLID INS ISO STANDARD CHAINS - 1977 RANGE OF CONVEYOR CHAINS STEELS WITH HIGH MECHANICAL STRENGTH improved material RESISTANCE & HARDNESS Increased BREAKING LOADS (see table on next
More informationWorm Gear Hand Winches Up to 4000 lb capacity
IO 900 ertified Worm Gear and Winches Up to 4000 lb capacity achine ut Worm Gears provide accurate operation and long lasting service. nclosed Oil ath provides continuous lubrication of gears to minimize
More information- em ACCESSORIES PARTITION SCREENS 2. Chipboard partition screen with upholstered panel
1. Chipboard partition - em ACCESSORIES PARTITION SCREENS 2. Chipboard with upholstered panel 3. partition with elastic edge panel H H Elastic edge Elastic edge Partition PIN 8 - Chipboard coated with
More informationSECTION LABORATORY FITTINGS
SECTION 11605 LABORATORY FITTINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Stainless steel laboratory pegboard drying racks. B. Stainless steel counters and sink bowls. C. Stainless steel shelving. D. Stainless
More informationEll PARTS CATALOG R-2216C HIGH FREE LIFT TRIPLEX I-BEAM MAST. White Materials Handling Division FOR ALL WHITE MOBILIFT TRUCKS 2000 TO 5000 LB CAPACITY
PARTS CATALOG R-6C HIGH FREE LIFT TRIPLEX I-BEAM MAST FOR ALL WHITE MOBILIFT TRUCKS 000 TO 5000 LB CAPACITY TRIPLEX " I TT BEAM UPRIGHT CONTENTS Ell WHITE MOTOR CORPORATION Upright for MSB, MA, WC & NY0-0
More information/PEN BuyLine Storage Guide.
10 56 13/PEN BuyLine 1111 Storage Guide www.pencoproducts.com Clipper Industrial Shelving Easy to Assemble Easy to Adjust Many Sizes Many Accessories Hi-Performance Shelves Powder Coat Finish Clipper Shelving
More informationClipper Defined. Shelving. Clipper Hi-Performance Shelving Systems. Growth with. Penco Hi-Performance Shelves. Growth with
Defined Clipper Hi-Performance Systems At the heart of the Clipper System is the ingenious Penco Clipper Clip. It is easily installed, holds the shelf firmly in place, can be repositioned at any time,
More informationWall Mount Racks - WMOD
Wall Mount Racks - WMOD Overview WMOD Series, Wall mount Racks for Outdoor Application and Designed to meet IP55 (Ingress protection) requirement. Racks are manufactured out of CRCA steel sheet punched,
More informationStandard. Industrial Storage Technology
Standard Industrial Storage Technology List of abbreviations used General abbreviations: V Packaging unit Dimensions and units: B Width H Height L Length T Depth Ø Diameter cm Centimetre kg Kilogram mm
More informationCurving (S) (L) CHORD (C) (IR) (IR) Example
Showcases Showcase systems offer a wide selection of framing, lighting and door options that allow you to integrate the components of your choice into a custom showcase that meets your exact specifications.
More informationUniline System FrontespizioUnilineSystem.indd 1 22/11/ :32:41
Uniline ystem 1 Uniline series Uniline series Uniline series description ig. 1 Uniline is a family of ready-to-install linear actuators. They consist of internal ompact Rail roller sliders and steel-reinforced
More informationRipac Vario-Module System Enclosure
Ripac Vario-Module System Enclosure The Riase instrument case impresses with its modern design and high functionality. Particular features include the numerous colour variants and the all-metal enclosure
More informationSimple, adaptable storage Ideal for tools and components Highly visible and right at hand 10 year extended guarantee
Flexible Efficiency Simple, adaptable storage Ideal for tools and components Highly visible and right at hand 10 year extended guarantee 138 www.bottltd.co.uk Perfo System Features & Benefits Page 140
More informationMade in the USA INDUSTRIAL BUCKET ELEVATORS
ade in the U UL U LV U : o provide innovative quality solutions that create an extraordinary customer experience. UGL HG L L P G LV HG LG H P High tandard imensions Gauge tandard High apacity odel odel
More informationPacking Solutions by Sovella
Packing Solutions by Sovella New requirements in dispatch areas Sovella s packaging workstations For a long time the packing bench was a flat bench with some storage for packing material. This has changed
More informationPARTS LIST GR 660-C (8 WHEELS)
PARTS LIST GR 0-C (8 WHEELS) --0000 # PART # Qty TITLE -0-0000 FRAME NC--00 RUBBER ABSORBER NC--08 WHITE METAL CONNECTOR --000 HYDRAULIC DISPENSING BLOCK NC--0 HEXAGONAL PLUG NC-80-008 # BLOCKED LINK CHAIN
More informationPARTS LIST GR-400 (4 WHEELS)
PARTS LIST GR-00 ( WHEELS) --000-0-000 FRAME --0 FOOTBOARD "STICKER INCLUDED" NC--00 RUBBER ABSORBER -0-000 OIL FILTER HOLDER 0-0- FLAT WASHER NC0--00 LOCK WASHER ZINC /" NC0--0 HEX. BOLT GR ZINC /- X
More informationHOUR DESPATCH. double sided
56 Wall Racks Wall Storage 2 or 3 cylinder units for 2 cylinder sizes. These racks must be fixed to the wall at a height of at least two-thirds of cylinder height. Supplied with pre-drilled fixing holes.
More informationChannel Cable Tray - Accessories & Fittings
hannel able Tray - Straight Sections E-1 -Line series able Tray Systems hannel able Tray - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding
More informationCHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70
Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile
More informationROSTA Rubber Suspension Units. Multifunctional Modules for the Machine Industries guiding tensioning absorbing
ROT ultifunctional odules for the achine Industries guiding tensioning absorbing pendulum suspensions for unbalanced motors torque supports for gear motors ROT Rubber torsion-elastic spring assemblies
More informationFOOTBRIDGE ELEVATION SCALE 1:100
OVERALL BRIDGE LENGTH 20000 DAIRY FLAT HIGHWAY END STEEL HANDRAIL BOTH SIDES 20 CURTAIN WALL 1900 20 CURTAIN WALL D1 RL.m A 2 B E1 RL.7m E 1% LONGITUDINAL GRADE E12 E11 E1 STEEL HANDRAIL BOTH SIDES 4 E14
More informationCable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/30 Cable Ladder Type 3/50 K-1000 Channel KT3/KT5 Ladder Tray
www.hesales.com.au Cable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/3 Cable Ladder Type 3/5 K- Channel KT3/KT5 Ladder Tray -.55mm base Galvabond - 2.4m length. 14mm side - Self-splicing
More informationHaul-Your-Might T3. Product Name: Product Code: Please read all instructions carefully before assembly, installation and/or use of this product.
WARNING: DO NOT exceed 800 lbs. (363 Kgs) WARNING: DO NOT exceed vehicle manufacturer s weight rating. Tools Required: 17mm Socket 5mm Hex Key 1/8 Hex Key Tape Measure 17mm Wrench 13mm Socket Hack Saw
More informationS/6EA CARRIAGE & ELECTRICAL INSTALLATION INSTRUCTIONS PART VI CARRIAGE ASSEMBLY ELECTRICAL WIRING PART III THE FESTOON RACKING ELECTRICAL HOOK-UPS
S/6EA CARRIAGE & ELECTRICAL INSTALLATION INSTRUCTIONS PART I CARRIAGE ASSEMBLY PART II ELECTRICAL WIRING PART III THE FESTOON PART IV RACKING PART V ELECTRICAL HOOK-UPS PART VI MISCELLANEOUS This symbol
More informationTOX -Presses kn
OX -resses 2 2000 kn ata heet 60.00 2016 / 02 OX RONI mb & o. Riedstrasse 4-88250 eingarten el. +49 (0) 7 51 / 50 07-0 Fax +49 (0) 7 51 / 5 23 91 -ail: info@tox-de.com 1 OX --Frame ress eries Q O 2 ith
More informationRhino-Rack Nautic Kayak Loader (NKL)
Important: Please read these instructions carefully prior to installation. Please refer to your fitting instruction to ensure that the roof racks are installed in the correct locations. heck the contents
More informationPower Clamp Cylinder
ower lamp ylinder onforming to the ew S Standard Series Z2 ompliant ew Special /()U or rance ZR or urope ZT or orth merica Z2 2T/2/ () or sia 2 ourtesy of Steven ngineering, nc.-2 Ryan Way, South San rancisco,
More informationRhino-Rack Nautic Kayak Loader (NKL)
Important: Please read these instructions carefully prior to installation. Please refer to your fi tting instruction to ensure that the roof racks are installed in the correct locations. heck the contents
More informationEquipment for Cargo Vans. Mercedes Metris UPFIT GUIDE. 1(800)
Equipment for Cargo Vans Mercedes Metris UPFIT GUIDE 1 (800) 565-5321 www.rangerdesign.com 1(800) 565-5321 www.rangerdesign.com Ranger combines old-fashioned service with state of the art technology...
More informationHIGH PRECISION CONVEYOR CHAINS AND SPROCKETS
HIGH PRECISION CONVEYOR CHAINS AND SPROCKETS Dro forged DIN 8165 FV DIN 8167 M SMS 1698 Transmission chains scanchain.net About ScanChain About ScanChain Most roviders of industrial chains in the Nordic
More informationTOX -FinePress. Benchtop presses 2 57 kn. Data sheet Riedstrasse Weingarten, Germany. Find your local contact at:
TOX -FinePress Benchtop es 2 57 kn Data sheet 60.10 2018 / 05 TOX GmbH & Pressotechnik Co. KG Riedstrasse 4 88250 Weingarten, Germany Find your local contact at: Toggle Presses KF 2.5 33 kn Changing the
More informationCONTROL DAMPERS. Model Model 1370CB. Model 1380CB. Model 1390CB B7
CONTROL DAMPERS MODEL 1380 HIGH PERFORMANCE ACKDRAFT DAMPER EXTRUDED ALUMINUM HEAVY DUTY Model 1380 is a high performance extruded aluminum gravity operated backdraft damper for use in medium to heavy
More informationShelving systems Stable construction, simple assembly
Shelving systems Stable construction, simple assembly Shelving systems in classical unit widths of 1000 or 1300 are suitable for every application, for every inventory type and for every kind of storage
More informationC A R T S & T A B. Utility Tables. Visit Us on the web at TU D w/3 casters TU D. w/3 casters TU D
Utility ables B LE s U I L I Y U-1925-2-1D w/3 casters U-1925-3 w/3 casters lso vailable in ype 304 tainless teel (U eries, Drawerless Only) ee Pg. 4 U-1925-2 U eries - Utility arts ables - hese all welded
More informationF Series Drive Shafts, SMV and Miscellaneous Series Drive Shafts and Related Components
Page - 800 Series Drive Shafts and Related Components 800 Series Drive Shafts and Tube ssemblies (800 Series) 800 Series Drive Shafts, SMV and Miscellaneous 4 Slow Moving Vehicle Signs 5 Skid Loader and
More informationStorage Cabinets XHD Shelving... 5 File Storage... 6 Desks... 6 Computer Cabinets... 7 Bookcases & Stock Carts... 8 Lockers... 9 Benches...
Storage Cabinets......... 2-5 XHD Shelving............. 5 File Storage.............. 6 Desks................... 6 Computer Cabinets......... 7 Bookcases & Stock Carts..... 8 Lockers................. 9
More informationPower Heads. Standard Unload. Power Sweep. Commercial Unload. Bin Systems. Unloading
Standard Unload Power Sweep Commercial Unload Power Heads Unloading Bin Systems Klean Sweep the finishing touch. The unique back-up shield and torque tube combination adjusts for close floor clearance
More informationSTORAGE & MATERIAL HANDLING
www.greenlee.com STORAGE & MATERIAL HANDLING Contractors the world over rely on Greenlee storage and material handling solutions to keep product safe. From small chests to large field offices, and now
More informationPerfo. Kits Perfo Accessories (without perforated panels) Kits Perfo Accessories (with perforated panels)
482 Technical Information.......................... 484 48 Panels............................... 486 487 for rated Panels........... 488 0 Kits (without perforated panels). 02 07 Kits (with perforated
More informationBook and Shelf Trolleys
20 Book and Shelf Trolleys Book Trolley Capacity 250kg UDL Double sided with angled shelves Popular design for libraries, offi ces, classrooms, laboratories etc. Tubular steel frame with sheet steel shelves.
More informationProvincial Doors Inc.
Architectural Specifications* HI-PRESSURE DOOR Provincial Doors Inc. 3057 Kingsway Rd. Sudbury, ON P3B 2G5 (705) 560-8755 (800) 641-7893 (705) 524-1303 (FAX) * Please verify specifications. Provincial
More informationPrice List & Technical Manual August
Price List & Technical Manual August 2009 Pacific Clip Shelving 11 2 offers the versatility of inter-changeable components for all open and closed shelving units, the option of assembling with bolts and
More informationSTEEL, ¾ DIAMETER HEADED STUB PIN ENDS ARE MILLED FLAT TO -BELT PANS
ONE: BALE DEWIRING CONVEYOR FEED SYSTEM MODEL CB-6-60-11-23A35-27 -HEAVY DUTY CLOSED-OPEN FRAME STYLE CONVEYOR BUILT TO INDUSTRY STANDARDS WITH A HEAVY STEEL PAN ROLLER CHAIN BELT. -BELT WIDTH 60 -BELT
More informationSpider Shelving System
Spider Shelving System SHELVING INDEX SYSTEM THE MOST VERSATILE THAT EXISTS Much more than a simple shelving unit! Sturdy construction and quick assembly, the Spider shelving system meets all of your storage
More informationQ-LINE SHELVING Shelves
Shelves BOX FORM SHELVES SOLID SHELVES Punched on 1 1 /2" centers for optional bin dividers (BD-ddhh). PERFORATED SHELVES SHELF INFORMATION (Pertains to all shelves on this page.) All shelves are Box Beam
More informationDouble Sealed on Both Sides in one piece housing for structural rigidity
eries Right ngle elical/evel tainless teel ervofit odular ystem Features OER rives Inc. is proud to offer our quality-proven, high-efficiency eries elical/evel speed reducer in a stainless steel housing.
More informationGlass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
More information24 x 67 $ 2, x 75 $ 2, x 79 $ 3, x 67 $ 3, x 75 $ 3, x 75 $ 3, x 79 $ 3,610.
Vista Elite 0-18 Rev. A Page 1 of 8 Vista Elite Series List Prices Per Door Opening 2018 Prices CATALOG SIZE COOLER PACKAGE LIST PRICE 24 x 6 $ 2,955 24 x 5 $ 2,955 24 x 9 $ 3,214 26 x 6 $ 3,05 26 x 5
More informationFIX-WHEEL RAILS. rationalisation, transportation, automation
FIX-WHEE RIS DBGM rationalisation, transportation, automation IN SOCK he following items can always be delivered immediately from stock: CCESSORIES broad range of standard accessories supplements and simplifies
More informationSpartec CONVEYORS DESIGN MANUFACTURE INSTALLATION CONVEYORS
DESIGN MANUFACTURE INSTALLATION PARTS SCRAP PACKAGE BULK HANDLING LOW PROFILE DIE-VEYORS 2 Frame Heavy Duty BELT WIDTH + 1 1/2" 3/4" BELT WIDTH 3/4" 2" 1" BELT WIDTH + 3/4" SECTION VIEW WIDTHS: 2 Thru
More informationWFXC Type. Expansion H62. General Features. Characteristics. Series. Milling. Cutters. SEC-Wave Mill
EC-Wave ill WFX Type Expansion General Features EC-Waveill WFX type for shoulder milling, is a screw-on type cutter that uses 4-cornered inserts. Ideal cutting edge design delivers good squareness. eries
More informationPixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 916.524.8242 CN: 519.885.5775 Product Diversity
More informationTurntables (989) Turntables Conveyors. Low Profile Manual Turntables (LPMT) Manual Turntables
Conveyors Low Profile Manual (LPMT)... 236 Manual... 237-235 Powered -... 238 Low Profile Manual (LPMT) A valuable accessory for ergonomic work stations or for confined working areas. These turntables
More informationSection COMMUNICATION EQUIPMENT ROOM FITTINGS. Section Communications Cabinets, Racks, Frames and Enclosures
PART 1 GENERAL 1.1 WORK INCLUDED Section 27 11 00 COMMUNICATION EQUIPMENT ROOM FITTINGS Section 27 11 16 Communications Cabinets, Racks, Frames and Enclosures A. Provide all labor, materials, and equipment
More informationCITY OF ROCK ISLAND S P E C I F I C A T I O N S
CITY OF ROCK ISLAND S P E C I F I C A T I O N S It is the intent of the City of Rock Island to receive bids on fourteen (14) snow plows. The proposed plows will be used by the Public Works Departments
More informationMini-Racking Proposals
When ordering, model numbers must be completed as follows : unit unit BOLTED uprights D A WELDED uprights E B S Steel decking W Wire decking Without Exemple : SR 5001 Example : S R D 5 0 0 1 S for a starter
More informationSeries 1 Steel - Straight Sections
- Straight Sections H-1 -Line series able Systems - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding system in this catalog is designed
More informationBulletin 1494V Variable Depth Disconnect Switch Installation Instructions (Cat 1494V-DS400; -DSX400 - Series D)
Bulletin 494V Variable Depth Disconnect Switch Installation Instructions (Cat 494V-DS400; -DSX400 - Series D) ATTENTION: To prevent electrical shock, disconnect from power source before installing or servicing.
More informationMaximize Payload Performance Lightweight and Thermally Efficient
Maximize Payload Performance Lightweight and Thermally Efficient BEVERAGE FROZEN FOOD HOME DELIVERY ICE CREAM MEAT AND SEAFOOD PHARMACEUTICAL RETAIL GROCERY VENDING LIGHTWEIGHT & DURABLE ERGONOMIC & FUNCTIONAL
More informationModel Vista Elite Series
Vista Elite 05-1 Rev. F Page 1 of 8 Model Vista Elite Series List Prices Per Door Opening 201 Prices CATALOG DOOR SIZE ACTUAL DOOR SIZE WITH MULLIONS ACTUAL DOOR SIZE NO MULLIONS COOLER DOOR LIST PRICE
More informationSection 10 Conveyors and Transport Components
1 Section Conveyors and Transport Components Roller elements, roller profiles, support rollers, and other components are perfect to set up lean manufacturing work cells. These non-powered roller elements
More informationColour: Black. ML x 50 1/8 x 12 1/2 8" Rubber ML x 62 1/8 x 12 1/2 8" Rubber ML599 Jack Handle 8" Rubber
Utility Carts Side Panel Platform Trucks Ideal for transporting and retaining small packages and materials Ergonomic handle design improves control and worker safety Side panels easily remove to accommodate
More information19 inch Rack Cabinets
Setting new standards in outstanding design and superior quality manufacturing are just two of the main goals which Hallam Manufacturing build into all their products. Through research,development and
More informationIsys Micro Series. Valve Products. Operating information. Material specifications. Pilot configuration
atalog 000-3US The Valve System incorporates a space saving back to back valve mounting design, and achieves flow rates of 0.35 v per valve with valves having a combined width of mm. This plug-in valve
More informationP (Nominal) L T mm in N lbf kg/m lb/ft
Datasheet: uni C C Rough EN lastic Modular elt Series uni C Rough Running direction elt material & color OM-NLS K OM-NL K in material & color 6.6 N Non standard material and color: See uni Material and
More informationVEROTEC Electronics Packaging
VEROTEC Electronics Packaging Eurotec Eurotec E u r o t e c c a s e f r a m e s Eurotec CASEFRAMES The Eurotec Caseframe is designed for applications that require the mounting / housing of Eurocard-style
More informationBottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color
More informationSpider Shelving System
Spider Shelving System THE MOST VERSATILE THAT EXISTS Much more than a simple shelving unit! Sturdy construction and quick assembly, the Spider shelving system meets all of your storage needs. With its
More informationPORTA-DOCK, INC. 100A 1284 ALUMINUM CANTILEVER BOAT LIFT
Page 1 of 7 PORTA-DOCK, INC. 100A 1284 ALUMINUM CANTILEVER BOAT LIFT Thank you for purchasing our product! Please read these instructions and follow them step by step. * STEP 1. Separate and group like
More informationMini-Racking Proposals
Mini-Racking Proposals When ordering, model numbers must be completed as follows : unit unit BOLTED uprights D A WELDED uprights E B S Steel decking W Wire decking Without Exemple : SR 5001 Example : S
More informationSingle-Sided Storage Rack Assembly Instructions
Single-Sided Storage Rack Assembly Instructions H D I G J K M L F I D B C A E PART NAME QTY A. BASE BAR (50 ) 2 B. BASE BAR HULL GUARD (34 ) 2 C. BASE BAR END CAP 2 D. SAFETY END CAP 4 E. FOOT 4 F. UPRIGHT
More informationSELF-CONTAINED CABINET WITH SWING-TYPE or FOLDING DOORS
GENERAL CHARACTERISTICS: * Fabricated body and base for optimum rigidity * Flat-bottomed base for easy removal of filing folders * Two welded jack supports with 4 adjusters * Shelves with attachments for
More informationAlpha System ADAPTABLE KEWAUNEE LABORATORY FURNITURE. encouraging new discovery
Alpha System ADAPTABLE LABORATORY FURNITURE KEWAUNEE encouraging new discovery Alpha 6 partition modules with Kemresin worktops. Minneapolis, Minnesota Alpha 6 partition modules with Alpha overhead service
More informationTG/RB/2M/Web Rev.12/1/16. Pipe Hangers & Devices
TG/RB/2M/Web Rev.12/1/16 Pipe Hangers & Devices Pipe Welcome Hangers to PHD & Devices Manufacturing PHD Manufacturing, Inc. was founded in 1972 by a group of industry veterans with strong management, financial,
More information150mm Conveyor System
150mm Conveyor System FlexMove Product Catalogue 231 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM.
More informationPARTS LIST GR 660 (8 WHEELS)
PARTS LIST GR 0 (8 WHEELS) --000 --000 HYDRAULIC SYSTEM --000 ENGINE COVER GROUP --00 STEERING SYSTEM GROUP --00 HYDROSTATIC SYSTEM GROUP --000 RIGHT ROLLER GROUP --00 FRONT-LEFT ROLLER --00 BACK-LEFT
More informationALUMINUM LADDER INDUSTRIES. The ultimate in safety, appearance & construction LIGHTWEIGHT - DURABLE MOBILE LADDER STAND MOBILE LADDER STAND
LADDER INDUTRIE The ultimate in safety, appearance & construction O H A QUIMENT TEP DECRIPTION Equipped with each Dia. pring Ruggedly braced and reinforced tandard deep top platform olid mig welded construction
More informationSTEP LADDER ALUMINIUM
STEP LADDER ALUMINIUM STEP LADDER ALUMINIUM with or without HANDLE Steel Step Ladder Light Grey 6-8 steps W D H h 3-6 steps Features: Light weight Easy to use 3-5 steps 3-6 steps 2-3 steps Certificate
More information250 bar P max. Technical Features. Functional Description
Hydraulic ini ower ack S 5 Example: plastic tank version Q max 17 l/min p max 25 bar max 3 kw echnical Features C and DC electro-hydraulic unit, easy-to-assemble, compact odularity offers many combinations
More informationTechWorks Typicals. Office Suites. Seating. Tables. Desks. Essentials. Meeting. Organization. Personal. Ergonomics. High Density Storage
TechWorks Typicals Note: All typical bench tops and organizer frame shelves are priced with High Pressure Laminate (HPL) and Bullnose 3mm edge (Black only) options. Changing options on typicals will require
More informationCylinder Wall Racks. Cylinder Storage. Floor Fixing Cylinder Racks. Static Cylinder Stands. Cylinder Storage 56 HOUR
56 Wall Racks Wall Storage 2 or 3 cylinder units for 2 cylinder sizes. These racks must be fixed to the wall at a height of at least two-thirds of cylinder height. Supplied with pre-drilled fixing holes.
More informationCylinder Wall Racks. Cylinder Storage. Floor Fixing Cylinder Racks. Static Cylinder Stands. Cylinder Storage 56
56 Wall Racks Wall Storage 2 or 3 cylinder units for 2 cylinder sizes. These racks must be fixed to the wall at a height of at least two-thirds of cylinder height. Supplied with pre-drilled fixing holes.
More informationClassic Media Cabinets
Pro Overview Mix Heights 30" and 48" Widths Contemporary Styling Discrete Slot Data Racks Overfile available for the 48" Cabinet Pro VF Classic Classic Styling for Match-in Dedicated Microfilm 3 Footprints
More information