Tri-Boro Shelving Features

Transcription

1 6Steel Shelving Tri-Boro Shelving Features Tri-Boro Shelving is manufactured in the widest range of sizes available in the industry. When used in combination this array of sizes can meet the most demanding of custom applications. The flanged shelf is manufactured from cold rolled steel and has Triple Bends on all four sides for incomparable strength. Standard shelves are manufactured in 2, 30", 36", 42" and 48" widths, and 9",,, 16",, 21", 2, 30", 32" and 36" depths. Flange Shelves are available in both 20 GA. and 18 GA. material thickness. Class 0 is designed for applications that do not require extreme load bearing strength. The addition of 1 Re-Bar will increase bearing strength by about 50%. The addition of 2 Re-Bars will increase the bearing strength by over 100%. Please see the chart on page 6 for exact load bearing strengths. Boxer Shelf Boxer Shelves are constructed of 22, 20 or 18 gauge steel with full welded box formation in front and back of the shelf and have formed channels on both ends. All corners are lapped and welded for additional strength. The box formation is welded on a 6" center minimum to provide integrity the entire length of the box. All shelves have a box profile height of 1-1/. All box shelves accommodate either clip or nut and bolt connection to the upright. Please see the chart on page 5 for exact load bearing strengths. Tri-Boro s Boxer TM industrial grade steel shelving features a welded tubular box design with lapped and welded seam corners. All Tri-Boro steel components receive a rust resistant phosphatized cleaning for better paint adhesion and durability. A custom, quality blended powder coat paint is applied Electro-Statically and then baked on in a continuous curing oven for lasting durability and outstanding appearance. This process is the latest innovation for the integrity of paint surface and the protection of our environment. STANDARD FINISHES Tri-Boro s standard finish is Gray. However, all colors shown are available for a small additional charge. The choice of an alternate color may create a slight delay in delivery. Gray (standard) Blue Red Sky White Putty Mist Gray Black Sand SHELF TYPES Flange Shelf Class 0 No Re-Bar Class 1 1 Re-Bar Class 2 2 Re-Bar POST TYPES Tri-Boro manufactures rigid roll formed Box and companion Offset Angle type posts. The box post provides unobstructed shelf access. One box post takes the place of two angle posts at the front of a shelving unit. The offset angle post reduces shelf accessibility by 1 inch per end, although the field length is nominal to the dimension ordered. Box style post heights range from 3'1" to 11'3". Offset Angle heights range from 3'1" to 12'3". Both styles are manufactured in 1 foot increments. All posts are 14 gauge steel. Shelves can be either clipped or nut & bolted to the post. Heavy Duty Box Style and Heavy Duty Offset Posts Heights range from 7'3" to 16'3". Both styles are manufactured in 1 foot increments. All posts are standard 13 gauge (Also available in 12 gauge). Shelves can be either clipped or nut and bolted to the post. Heavy Duty Box Post Heavy Duty Offset Post Box Post Holes 1-1/2" O.C. Offset Angle Post Holes 1-1/2" O.C. Rolled Formed Angle Post Holes 1" O.C. Government Post Holes 1" O.C. Offset Angle Post Holes 1" O.C.

2 Tri-Boro Shelf Load Capacities FLANGE SHELF TRIPLE BENDS ALL FOUR SIDES 10 DEPTHS 5 WIDTHS 20 GA. AND 18 GA. BOXER (BOX SHELF) FULL WELDED BOX FORMATION (FRONT AND BACK) 7 DEPTHS 5 WIDTHS 22 GA., 20 GA. AND 18 GA. Steel Shelving FLANGE SHELVES LOAD CAPACITY COMPARISON CHART Size 20 GA. 18 GA. 1 Rebar 1 Rebar 2 Rebar 2 Rebar 20 GA. 18 GA. 20 GA. 18 GA. x 36" x 42" x 48" x 36" x 42" x 48" x 36" x 42" x 48" x 36" x 42" x 48" " x 36" " x 42" " x 48" " x 36" " x 42" " x 48" BOXER SHELVES LOAD CAPACITY COMPARISON CHART Size 22 GA. 20 GA. 18 GA. Capacity Capacity Capacity x 36" x 42" x 48" x 36" x 42" x 48" x 36" x 42" x 48" " x 36" " x 42" " x 48" x 36" x 42" x 48" " x 36" " x 42" " x 48" " x 36" " x 42" " x 48" Tri-Boro Hinged Doors for Shelving HINGED DOORS CONSTRUCTED OF DURABLE 20 GAUGE STEEL, 13 GAUGE FRAME DOORS EQUIPPED WITH THREE-POINT LOCKING DEVICE, OPEN 180 DEGREES 85" H & 73" H DOORS HAVE A PAN REINFORCEMENT, SPOT WELDED ON EACH SIDE TOP AND BOTTOM LOCKING ROD CHANNELS EASY TO INSTALL! DOORS PRE-ASSEMBLED AND READY TO INSTALL INCLUDED: STANDARD SATIN CHROME FINISHED HANDLE WITH LOCK & 2 KEYS (Keyed Differently) DOORS WILL FIT OFFSET & ROLLED-FORMED POSTS (Doors Only - Shelving components sold separately. Not for use with box posts.) Catalog No. W x H Wt. (lbs.) HD " x 37" 35.0 HD " x 73" 65.0 HD " x 85" 70.0 HD " x 37" 40.0 HD " x 73" 85.0 HD " x 85" 90.0 HDK2 Extra Key 37" H 73" H 85" H Standard Doors Available in 3 Heights: 37", 73" & 85" 7

3 Steel Shelving Components & Accessories Tri-Boro Shelving Posts & Standard Foot Plates OFFSET ANGLE POST 1-1/2" O.C. Made of 14 gauge cold-rolled steel, roll formed into a 1"x 1-7/8" angle. The wide flange is punched on 1-1/2" centers with 7/16" square slots to receive shelf clips and 5/16" diameter holes on 1-1/2" centers for the attachment of side sway braces or solid panels. OP37 3'1" 2.0 OP49 4'1" 3.0 OP61 5'1" 4.0 OP73 6'1" 4.8 OP85 7'1" 5.5 OP97 8'1" 6.0 OP109 9'1" 7.0 OP121 10'1" 8.0 OP133 11'1" 8.8 OP145 12'1" 9.5 OFFSET ANGLE POSTS 1" O.C. Made of 14 gauge cold-rolled steel, roll formed into a 1" x 1-7/8" angle. The wide flange is punched on 1" centers with 7/16" square slots to receive shelf clips and 5/16" diameter holes on 1" centers for the attachment of side sway braces or solid panels. OP39 3'3" 2.0 OP51 4'3" 3.0 OP63 5'3" 4.0 OP75 6'3" 4.8 OP87 7'3" 5.5 OP99 8'3" 6.0 OP111 9'3" 7.0 OP123 10'3" 8.0 OP135 11'3" 8.8 ROLLED FORMED POST A 1-1/ x 1-1/ angle made from rolled formed steel with holes punched on 1" centers. All posts are standard 13 gauge (Also available in 12 gauge). GA. RFP39 3'3" RFP51 4'3" RFP63 5'3" RFP75 6'3" RFP87 7'3" RFP99 8'3" RFP111 9'3" RFP123 10'3" RFP147 12'3" RFP171 14'3" RFP195 16'3" BOX POST 1-1/2" O.C. This clip-type post eliminates items being snagged during loading and unloading. Rectangular holes for clips punched on 1-1/2" centers and 5/16" diameter holes 1-1/2" on center as above. Made from 14 gauge cold-rolled steel. BP37 3'1" 2.2 BP49 4'1" 3.4 BP61 5'1" 4.5 BP73 6'1" 5.4 BP85 7'1" 6.3 BP97 8'1" 7.2 BP109 9'1" 8.1 BP121 10'1" 9.0 BOX POST 1" O.C. This clip-type post eliminates items being snagged during loading and unloading. Rectangular holes for clips punched on 1" centers and 5/16" diameter holes 1" on center as above. Made from 14 gauge cold-rolled steel. BP39 3'3" 2.2 BP51 4'3" 3.4 BP63 5'3" 4.5 BP75 6'3" 5.4 BP87 7'3" 6.3 BP99 8'3" 7.2 BP111 9'3" 8.1 BP123 10'3" 9.0 GOVERNMENT POST ROLLED FORMED STEEL 13 gauge hot-rolled steel 1" x 1-3/ with 1" centers. GP75 6'3" 4.9 GP87 7'3" 5.7 GP99 8'3" 6.5 STANDARD FOOT PLATES Number FPOP1-D (1" O.C.) Number FPOP15-D (1-1/2" O.C.) 8 Number FPOP1-S (L or R) (1 O.C.) FPOP15-S (L or R) (1-1/2 O.C.) (not pictured)

4 Tri-Boro Heavy Duty Shelving Posts & Heavy Duty Foot Plates HEAVY DUTY BOX POST 1" O.C. Grade 50 Face is.750 x All posts are standard 13 gauge (Also available in 12 gauge). HDBP '3" 11.6 HDBP '3" 13.3 HDBP '3" 14.8 HDBP '3" 16.4 HDBP '3" 18.0 HDBP '3" 19.6 HDBP '3" 21.2 HDBP '3" 22.8 HDBP '3" 24.4 HDBP '3" 26.0 HEAVY DUTY OFFSET POST 1" O.C. Grade 50 Size: x All posts are standard 13 gauge (Also available in 12 gauge). HDOP '3" 7.1 HD0P '3" 8.1 HD0P '3" 9.1 HD0P '3" 10.3 HD0P '3" 11.3 HD0P '3" 12.0 HD0P '3" 13.0 HD0P '3" 14.0 HD0P '3" 15.0 HD0P '3" 15.9 Heavy Duty High Bay Shelving Posts Available in 12 & 13 gauge Finished heights up to 16' without splicing Available in both offset angle and beaded box post FOOT PLATES Number FPHDBP1 1" O.C. Heavy Duty Box Post Foot Plate Steel Shelving Components & Accessories Shelving with box posts at front and offset angle posts at rear Measurements for HD box post Shelving with offset angle posts front and rear 36-3/8" 36" 9' 0-3/8" 36-7/8" 36-3/16" 9' 1-1/ 36" 36" 9' 0" 36" 36-3/16" 36" When placing units back to back, omit back panel on 1/2 of the units, thus permitting the use of a common back panel. Same applies to open type, omit 1/2 back sways. Number FPHD1-SL 1" O.C. Heavy Duty Offset Post Foot Plate Single Left Number FPHD1-SR 1" O.C. Heavy Duty Offset Post Foot Plate Single Right Number FPHD1-D 1" O.C. Heavy Duty Offset Post Foot Plate Double 9

5 Steel Shelving Components & Accessories 10 Tri-Boro Flange & Box Shelves ADJUSTABLE STEEL FLANGE SHELVES (FOR CLIP-TYPE AND NUT AND BOLT) All shelves are made of 20 or 18 gauge cold rolled steel. Each side has triple bends for added strength. NOTE: ADD SUFFIX X FOR 18 GAUGE EXAMPLE: S924X = 18 GAUGE 9" x 2 20 GA. 18 GA. Number Size Wt. Wt. S924 9" x S930 9" x 30" S936 9" x 36" S942 9" x 42" S948 9" x 48" S1224 x S1230 x 30" S1236 x 36" S1242 x 42" S1248 x 48" S1524 x S1530 x 30" S1536 x 36" S1542 x 42" S1548 x 48" S1824 x S1830 x 30" S1836 x 36" S1842 x 42" S1848 x 48" S " x S " x 30" S " x 36" S " x 42" S " x 48" S x S x 30" S x 36" S x 42" S x 48" S " x 30" S " x 36" S " x 42" S " x 48" S " x 36" S " x 42" S " x 48" NOTE: OTHER SIZES AVAILABLE CALL TRI-BORO BOXER TM (BOX-SHELF) ADJUSTABLE STEEL BOX SHELVES Shelves are constructed of 18, 20 or 22 gauge steel with full welded box formation in front and back of shelf and have formed channels on both ends. All four corners are lapped and welded for additional strength. The box formation is welded on a 6-inch center minimum to provide integrity to the entire length of the box. All shelves have a box profile height of 1-1/. All box shelves are designed to accommodate either clip or nut & bolt connection to the upright, and are punched for dividers on 1" centers. * BOXER TM shelves are compatible with all existing Tri-Boro shelving components. NOTE: ADD L FOR 22 GAUGE / ADD X FOR 18 GAUGE 22 GA. 20 GA. 18 GA. Number Size Wt. Wt. Wt. BX1224 x BX1230 x 30" BX1236 x 36" BX1242 x 42" BX1248 x 48" BX1524 x BX1530 x 30" BX1536 x 36" BX1542 x 42" BX1548 x 48" BX1824 x BX1830 x 30" BX1836 x 36" BX1842 x 42" BX1848 x 48" BX "x BX "x 30" BX "x 36" BX "x 42" BX "x 48" BX2424 2x BX2430 2x 30" BX2436 2x 36" BX2442 2x 42" BX2448 2x 48" BX "x 30" BX "x 36" BX "x 42" BX "x 48" BX "x 36" BX "x 42" BX "x 48" NOTE: OTHER SIZES AVAILABLE CALL TRI-BORO

6 Tri-Boro Side & Back Panels OFFSET SIDES (Clip-Type Shelving - 1" O.C.*) SIDE PANEL - 24 GA. * Also for use with 1-1/2" O.C. Made of cold-rolled steel. Punched along edges with 3/8" dia. holes on 1" centers for attaching to front and rear post. Shelf Number Depth Dimensions Wt. OS639 9" 6" x 39" 2.5 OS645 9" 6" x 45" 2.9 OS651 9" 6" x 51" 3.3 OS939 9" x 39" 3.0 OS945 9" x 45" 4.0 OS951 9" x 51" 5.0 OS1239 x 39" 3.5 OS1245 x 45" 3.5 OS1251 x 51" 5.2 OS x OS x OS x OS " x 39" 5.7 OS " x 45" 6.5 OS " x 51" 7.4 OS " x 39" 6.0 OS " x 45" 7.0 OS " x 51" 8.0 OS " 27" x 39" 7.5 OS " 27" x 45" 8.0 OS " 27" x 51" 9.5 OS " 33" x 39" 9.0 OS " 33" x 45" 11.0 OS " 33" x 51" 12.0 OS " 45" x 39" 12.0 OS " 45" x 45" 15.0 OS " 45" x 51" 16.0 OFFSET BACKS (Clip-Type Shelving - 1" O.C.*) BACK PANEL - 24 GA. * Also for use with 1-1/2" O.C. Made of cold-rolled steel. Punched along edges with 3/8" dia. holes on 1" centers for attaching to front and rear post. Shelf Number Width Dimensions Wt. OB x 39" 6.1 OB x 45" 7.1 OB x 51" 8.1 OB " 30" x 39" 7.7 OB " 30" x 45" 9.0 OB " 30" x 51" 10.2 OB " 36" x 39" 9.2 OB " 36" x 45" 10.7 OB " 36" x 51" 12.2 OB " 42" x 39" 10.7 OB " 42" x 45" 12.5 OB " 42" x 51" 14.2 OB " 48" x 39" 12.3 OB " 48" x 45" 14.3 OB " 48" x 51" 16.3 CLIP-TYPE SHELVING BACK AND SIDE REQUIREMENTS - 1" O.C. * Also for use with 1-1/2" O.C. To make the following heights of units follow the chart below to determine number and dimensions of components. Shelving Height # of Backs or Sides 5' 3" = 2 Pieces 39" 6' 3" = 2 Pieces 39" 7' 3" = 2 Pieces 45" 8' 3" = 2 Pieces 51" 9' 3" = 3 Pieces 39" 10' 3" = 3 Pieces 45" 11' 3" = 3 Pieces 51" 12' 3" = 3 Pieces 51" 14' 3" = 4 Pieces 45" 16' 3" = 4 Pieces 51" BACK AND SIDES (Nut and Bolt Type) Made of cold-rolled steel. Punched along edges with 3/8" dia. holes on 1" centers for attaching to front and rear post. Backs over 4' 3" consist of overlapping pieces. Number Size Wt. BS939 9" x 3' 3" 2.5 BS945 9" x 45" 2.9 BS951 9" x 4' 3" 3.3 BS1239 x 3' 3" 3.0 BS1245 x 45" 4.0 BS1251 x 4' 3" 5.0 BS1539 x 3' 3" 3.5 BS1545 x 45" 3.5 BS1551 x 4' 3" 5.2 BS1839 x 3' 3" 4.5 BS1845 x 45" 5.0 BS1851 x 4' 3" 6.0 BS " x 3' 3" 5.7 BS " x 45" 6.5 BS " x 4' 3" 7.4 BS x 3' 3" 6.0 BS x 45" 7.0 BS x 4' 3" 8.0 BS " x 3' 3" 7.5 BS " x 45" 8.0 BS " x 4' 3" 9.5 BS " x 3' 3" 9.0 BS " x 45" 11.0 BS " x 4' 3" 12.0 BS " x 3' 3" 10.5 BS " x 45" 13.5 BS " x 4' 3" 15.0 BS " x 3' 3" 12.0 BS " x 45" 15.0 BS " x 4' 3" 16.0 Special sizes available Special bending for tables and counters available NUT & BOLT SHELVING BACK AND SIDE REQUIREMENTS To make the following heights of units follow the chart below to determine number and dimensions of components. Shelving # of Backs Height or Sides 5' 3" = 2 Pieces 39 6' 3" = 2 Pieces 39 7' 3" = 2 Pieces 45 8' 3" = 2 Pieces 51 9' 3" = 3 Pieces 39 Shelving # of Backs Height or Sides 10' 3" = 3 Pieces 45" 11' 3" = 3 Pieces 51" 12' 3" = 3 Pieces 51" 14' 3" = 4 Pieces 45" Steel Shelving Components & Accessories 11

7 Steel Shelving Components & Accessories Tri-Boro Sway Braces, Label Holders, Reinforcements, Shelving Clips & Hardware SWAY BRACES Made of 1" wide hot-rolled 12 gauge steel strip with safety edges. Ends are radiused and punched for attaching to front and rear post. Number Shelf Size Wt. SB SB " 2.0 SB48 42"-48" 3.2 General side/back & sway brace info: When supplying open shelving units, one pair of braces for each side/back location may not always be sufficient. The following is our recommended sway brace to unit height chart. Note: Common sides and backs share sway bracing. 1 pair of sway braces Post height up to 7' for each side/back location 2 pair of sway braces Post height from 8' to 10' for each side/back location 3 pair of sway braces Post height from 11' to 13' for each side/back location 4 pair of sway braces Post height from 14' to 16' for each side/back location LABEL HOLDERS Made of cold-rolled steel. Punched on ends for attaching to front edge of shelves. The top and bottom edges are folded over to accommodate labels approximately 1" high. LH LH30 30".3 LH36 36".4 LH42 42".5 LH48 48".6 NOTE: Welded Label Holders Available for flange shelves only. REINFORCEMENTS A 1" x 1" angle made of 12 gauge steel used to reinforce front and /or back of shelf. RB18.7 RB21 21" 1.0 RB RB30 30" 1.7 RB36 36" 2.0 RB42 42" 2.4 RB48 48" /2 O.C. (COP15) 1 O.C. (COP1) CLIPS FOR OFFSET/BOX POSTS 14 gauge (.078 thick) steel zinc plated Number Wt. COP15 1 oz. COP1 1 oz. ROUNDHEAD BOLTS WITH HEX NUTS (Sold in boxes of 100) Number Size Quantity Wt. HB63 1/ x 5/8" HB100 1/ X 1" HB125 1/ X 1-1/

8 Tri-Boro Angle Sways & Splices ANGLE SWAYS (For 1" on Center Offset and Nut & Bolt Shelving) A 5" x 5" L-shaped bracket that is made of 11 gauge steel with holes punched 2" on center. Gives 5 points of fastening between shelf and upright to prevent lateral movement when sway bracing is not used. AN55 5" x 5".02 OFFSET ANGLE SWAYS (For 1-1/2" on Center Shelving) A 5" x 5" L-shaped bracket made of 11 gauge steel with one leg punched on 2" centers and the other punched 1-1/2" on center. Gives 5 points of fastening between shelf and upright to prevent lateral movement when sway bracing is not used. OAS55 5" x 5".2 Steel Shelving Components & Accessories SPLICE (For Rolled Formed Post) Made of hot-rolled 12 gauge steel. Punched 2" on center for the joining of two roll form posts. Dimensions of splice are 1" x 1" x 7". Number Wt. SP " O.C. OFFSET SPLICE 1-1/2" O.C. Made from cold-rolled 12 gauge steel. Punched on 1-1/2" and 1" on centers from either end for the joining of two offset posts. Dimensions of splice are 3/ x 1" x 5". Number Wt. OSP OSP1.18 BOX POST SPLICE Made from cold-rolled 12 gauge steel. Punched on 1-1/2" and 1" on centers from either end for the joining of two box posts. Number Wt. Dimensions OSP " x 1.775" OSP " x 1.775" HEAVY DUTY OFFSET POST SPLICE Made from cold-rolled 12 gauge steel. Punched on 1" on centers from either end for the joining of two heavy duty offset posts. Number Wt. Dimensions HDOSP " x 1.875" x 1.223" HEAVY DUTY BOX POST SPLICE Made from cold-rolled 12 gauge steel. Punched on 1" on centers from either end for the joining of two heavy duty box posts. Number Wt. Dimensions HDBSP " x 1.775" 13

9 Steel Shelving Components & Accessories 14 Tri-Boro Shelving Bin Fronts BIN FRONTS (Nut and Bolt Shelving) Made of cold rolled 18 gauge steel. Top edge is formed into a hem. Bottom is flanged to rest on shelf and punched to provide means of attaching to post. Number Size H x W Wt. BF224 2" x 2.9 BF230 2" x 30" 1.2 BF236 2" x 36" 1.4 BF242 2" x 42" 1.6 BF248 2" x 48" 1.8 BF424 x BF430 x 30" 2.0 BF436 x 36" 2.5 BF442 x 42" 2.8 BF448 x 48" 3.2 BF624 6" x BF630 6" x 30" 2.8 BF636 6" x 36" 4.0 BF642 6" x 42" 4.4 BF648 6" x 48" 5.1 OFFSET BIN FRONTS (Clip-Type Shelving 1-1/2" O.C.) Made from 18 gauge steel Number Size H x W Wt. OBF /2" x 2.6 OBF /2" x 30".8 OBF /2" x 36".9 OBF /2" x 42" 1.1 OBF /2" x 48" 1.9 OBF324 3" x 2.9 OBF330 3" x 30" 1.2 OBF336 3" x 36" 1.4 OBF342 3" x 42" 1.7 OBF348 3" x 48" 1.9 OBF624 6" x OBF630 6" x 30" 1.4 OBF636 6" x 36" 1.6 OBF642 6" x 42" 1.9 OBF648 6" x 48" 2.2 OFFSET BIN FRONTS (Clip-Type Shelving 1 O.C.) Made from 20 gauge steel Number Size H x W Wt. OBF224 2" x 2.9 OBF230 2" x 30" 1.2 OBF236 2" x 36" 1.4 OBF242 2" x 42" 1.6 OBF248 2" x 48" 1.8 OBF424 x OBF430 x 30" 2.0 OBF436 x 36" 2.5 OBF442 x 42" 2.8 OBF448 x 48" 3.2 OBF624 6" x OBF630 6" x 30" 2.8 OBF636 6" x 36" 4.0 OBF642 6" x 42" 4.4 OBF648 6" x 48" 5.1 OFFSET BIN FRONTS BOX POST (Clip-Type Shelving 1-1/2" O.C.) Made from 18 gauge steel Number Size H x W Wt. OBBP324 3" x 2.9 OBBF330 3" x 30" 1.2 OBBF336 3" x 36" 1.4 OBBF342 3" x 42" 1.6 OBBF348 3" x 48" 1.9 OFFSET BIN FRONTS BOX POST (Clip-Type Shelving 1 O.C.) Made from 18 gauge steel Number Size H x W Wt. OBBP224 2" x 2.9 OBBF230 2" x 30" 1.2 OBBF236 2" x 36" 1.4 OBBF242 2" x 42" 1.6 OBBF248 2" x 48" 1.8

10 Tri-Boro Shelving Bases & Aisle Braces UNIVERSAL BASES (For Clip and Nut & Bolt Shelving) Made of cold-rolled steel. Channel formed to fit between shelf and floor. Punched for bolting to holes in front flange of post. OBS224 2" x 2.9 OBS230 2" x 30" 1.2 OBS236 2" x 36" 1.4 OBS242 2" x 42" 1.6 OBS248 2" x 48" 1.8 OBS324 3" x 2.9 OBS330 3" x 30" 1.2 OBS336 3" x 36" 1.2 OBS342 3" x 42" 1.7 OBS348 3" x 48" 1.9 BASES (Nut & Bolt Shelving) Made of cold-rolled 18 gauge steel. Channel formed to fit between shelf and floor. Pierced for bolting to holes in front flange of post. Bases and higher are punched 2" on center. BAS412 x.8 BAS415 x.8 BAS418 x.8 BAS424 x BAS430 x 30" 2.0 BAS436 x 36" 2.5 BAS442 x 42" 2.8 BAS448 x 48" 3.2 BAS612 6" x 1.1 BAS615 6" x 1.1 BAS618 6" x 1.1 BAS624 6" x BAS630 6" x 30" 2.8 BAS636 6" x 36" 4.0 BAS642 6" x 42" 4.4 BAS648 6" x 48" 5.1 OFFSET BASES FOR BOX POST (Clip-Type Shelving 1-1/2" O.C.) Made of cold-rolled 18 gauge steel. OBB324 3" x 2.9 OBB330 3" x 30" 1.2 OBB336 3" x 36" 1.4 OBB342 3" x 42" 1.7 OBB348 3" x 48" 1.9 OFFSET BASES FOR BOX POST (Clip-Type Shelving 1 O.C.) OBB224 2" x 2.9 OBB230 2" x 30" 1.2 OBB236 2" x 36" 1.4 OBB242 2" x 42" 1.6 OBB248 2" x 48" 1.8 Steel Shelving Components & Accessories OFFSET AISLE BRACES (Clip-Type Shelving) Made of 13 gauge channel formed steel with one additional return flange on top for added strength. End tabs are flanged at 90 angles with holes punched on 1-1/2 centers. OAB30 30" 4.6 OAB36 36" 5.4 OAB42 42" 6.3 OAB48 48" 7.1 AISLE BRACES (Nut & Bolt Shelving) Made of 13 gauge channel formed steel with one additional return flange on top for added strength. End tabs are flanged at 90 angles with holes punched on 2 centers. AB30 30" 4.6 AB36 36" 5.4 AB42 42" 6.3 AB48 48"

11 16Steel Shelving Components & Accessories Tri-Boro Bin Dividers, Shelf Boxes & Shelf Box Dividers SLIDING DIVIDERS Made of cold-rolled 18 gauge steel. Top corners are rounded for safety. Bottom is flanged for attachment to shelf, without hardware, allowing for horizontal mobility. Number Size H x D Wt. SD412 x 1.2 SD415 x 1.5 SD418 x 1.7 SD424 x SD612 6" x 1.7 SD615 6" x 1.8 SD618 6" x 1.9 SD624 6" x SD812 8" x 2.0 SD815 8" x 2.05 SD818 8" x 2.1 SD824 8" x Optional label holder: add -LH to part number. CLIPS FOR BIN DIVIDERS* Number Wt. CBDIV 8 oz. per 100 * Please specify: Clear for box shelves, Black for perforated flange shelves - same model number BIN DIVIDERS Made of cold rolled 24 gauge steel. Front and back edges are rolled to provide rigidity. Top and bottom are flanged and punched for attachment to shelves. Dividers are installed with snap-in spring-type clips. Number Size H x D Wt. BD612 6" x.8 BD615 6" x 1.1 BD618 6" x 1.3 BD624 6" x BD812 8" x 1.0 BD815 8" x 1.6 BD818 8" x 1.9 BD824 8" x BD912 9" x.9 BD915 9" x 1.1 BD918 9" x 1.3 BD924 9" x BD " x 1.0 BD " x 1.6 BD " x 1.9 BD " x BD1212 x 1.3 BD1215 x 2.0 BD1218 x 2.5 BD1224 x BD x 1.7 BD x 2.1 BD x 2.5 BD x BD1512 x 1.3 BD1515 x 1.7 BD1518 x 2.0 BD1524 x BD " x 1.9 BD " x 2.2 BD " x 2.8 BD " x BD1812 x 1.6 BD1815 x 2.0 BD1818 x 2.4 BD1824 x SHELF BOXES Front and rear panels are made of 20 gauge steel to help prevent unsightly dings. Body of box is made of 22 gauge steel. Front panel has built-in handle and 2" label holder. All boxes are 4-5/8" high. Dividers are not included but may be added as an option. Number Size W x H x D Wt. SB /2" x 4-5/8" x 10-7/8" 2.16 SB / x 4-5/8" x 10-7/8" 2.68 SB " x 4-5/8" x 10-7/8" 3.28 SB /2" x 4-5/8" x 16-7/8" 3.02 SB / x 4-5/8" x 16-7/8" 3.75 SB " x 4-5/8" x 16-7/8" 4.59 SB /2" x 4-5/8" x 22-7/8" 3.89 SB / x 4-5/8" x 22-7/8" 4.82 SB " x 4-5/8" x 22-7/8" 5.9 SHELF BOX DIVIDERS Made of 22 gauge steel. Number Size Wt. SBD5 5".0 SBD8 8".5 SBD11 11" 1.0

12 Tri-Boro Shelving Parts Identification & Quick Page Reference Posts (Page 6, 8) Shelves (Page 6, 7, 10) Sway Braces (Page 12) Sliding Dividers (Page 16) Side Panels (Page 11) Clips (Page 12) Back Panels (Page 11) Bin Fronts (Page 14) Shelf Boxes & Dividers (Page 16, 35, 38) Bin Dividers & Clips (Page 16) Additional Parts (Not Shown) Splices, Angle Sways (Page 13) Shelf Reinforcements, Label Holders (Page 12-13) Aisle Braces (Page 15) Steel Shelving Components & Accessories Bases (Page 15) Foot Plates (Page 8, 9) AUTOMOTIVE SHELVING Automotive Unit and Accessories Weight Part No. Basic Unit: D x 36"W x 8H (10 Shelf) A Components: Extra Slide-In Shelf: D x 36"W 5.5 AS3612 Upright: D x 8H 15.3 AU1284 Back: 36"W x49"h 18.0 AB3649 Base: 36"W x 3"H 1.4 AB36 Accessories: 3" Sliding Parts Divider: D x 3"H 1.2 ASD312 3" Sliding Parts Divider: D x 3"H w/label holder Sky White 1.3 ASD312-LH 8" Sliding Parts Divider D x 8"H w/label holder Sky White 2.1 ASD812-LH Shelf Box: 10-7/8"D x 5-1/2"W x 4-5/8"H 2.2 ASB5410 Shelf Box Divider: 5"W x 4-3/8"H 0.3 ASBD5 Automotive Label Holder 36" W 0.6 ALH36 Unit Color: Blue Back & Accessories Color: Sky White Sliding Parts Divider shown with optional label holder Automotive Unit with Accessories 17

13 18Steel Shelving Tri-Boro Starter and Add-On Shelving Configurations Cross Braces on both sides indicates starter Sides on both ends indicates starter 7 SHELVES 36" WIDE x 7' 1" HIGH Depth Starter Unit No. Add On Unit No. OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB Unit Type B=Boxer K=Klip-It T=Thunderbolt Unit Height Unit Depth Unit Width Number of Shelves 7 SHELVES 36" WIDE x 7' 1" HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB OS OPEN TYPE STARTER UNIT Each OS unit is complete consisting of: Open Type - Starter Unit Any number of shelves Four uprights Two pair of side sway braces One pair of back sway braces Necessary nuts and bolts or clips OA OPEN TYPE ADD-ON UNIT Each OA unit is complete consisting of: Open Type - Add On Unit Any number of shelves Four uprights One pair of back sway braces One pair of side sway braces Necessary nuts and bolts or clips CS CLOSED TYPE STARTER UNIT Each CS unit is complete consisting of: Closed Type - Starter Unit Any number of shelves Four uprights Two closed sides One closed back One base Necessary nuts and bolts or clips CA CLOSED TYPE ADD-ON UNIT Each CA unit is complete consisting of: Closed Type - Add On Unit Any number of shelves Four uprights One closed side One closed back One base Necessary nuts and bolts or clips

14 Tri-Boro Open & Closed Type Shelving Units 5 SHELVES 6'1" HIGH OPEN TYPE BOXER TM (BOX-SHELF): 22 GA., 20 GA. and 18 GA. UNIT NUMBERS ON THIS PAGE ARE 20 GA. ADD L FOR 22 GA., X FOR 18 GA. 5 SHELVES 36" WIDE x 6' 1" HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB " WIDE x 6' 1" HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB " WIDE x 6' 1" HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB SHELVES 36" WIDE x 6' 1" HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB " WIDE x 6' 1" HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB " WIDE x 6' 1" HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB SHELVES 36" WIDE x 6' 1" HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB " WIDE x 6' 1" HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB " WIDE x 6' 1" HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB ' 1" HIGH CLOSED TYPE BOXER TM (BOX-SHELF): 22 GA., 20 GA. and 18 GA. UNIT NUMBERS ON THIS PAGE ARE 20 GA. ADD L FOR 22 GA., X FOR 18 GA. 5 SHELVES 36" WIDE x 6'1" HIGH 6 SHELVES 36" WIDE x 6' 1 HIGH 7 SHELVES 36" WIDE x 6' 1" HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB " WIDE x 6' 1" HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB " WIDE x 6' 1" HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB SHELVES Note: Dimensions are for posts 1-1/2" on centers Dimensions for posts on 1" centers will be different. OSB NOTE: Add 2" to the height of each unit for Thunderbolt, O=Open C=Closed i.e. 6'1" Boxer & Klip-It = 6'3" Thunderbolt Shelving Units Also Available With Offset Posts 1" On Centers (See Page 12) and Clip (See Page 20) CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB " WIDE x 6' 1" HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB " WIDE x 6 '1" HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB S=Starter A=Add-on 7 SHELVES Unit Type B=Boxer K=Klip-It T=Thunderbolt CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB " WIDE x 6' 1" HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB " WIDE x 6' 1" HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB " Note: 36" Deep Shelving Available. See price list for components Steel Shelving 19

15 Steel Shelving 20 Tri-Boro Open & Closed Type Shelving Units 5 SHELVES 21" 21" 21" 7 1 HIGH OPEN TYPE BOXER TM (BOX-SHELF): 22 GA., 20 GA. and 18 GA. UNIT NUMBERS ON THIS PAGE ARE 20 GA. ADD L FOR 22 GA., X FOR 18 GA. 5 SHELVES 36 WIDE x 7 1 HIGH 6 SHELVES 36 WIDE x 7 1 HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB WIDE x 7 1 HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB WIDE x 7 1 HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB HIGH CLOSED TYPE BOXER TM (BOX-SHELF): 22 GA., 20 GA. and 18 GA. UNIT NUMBERS ON THIS PAGE ARE 20 GA. ADD L FOR 22 GA., X FOR 18 GA. 5 SHELVES 36 WIDE x 7 1 HIGH 6 SHELVES 36 WIDE x 7 1 HIGH 7 SHELVES 36 WIDE x 7 1 HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB WIDE x 7 1 HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB WIDE x 7 1 HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB SHELVES Note: Dimensions are for posts 1-1/2" on centers Dimensions for posts on 1" centers will be different. OSB NOTE: Add 2" to the height of each unit for Thunderbolt, O=Open C=Closed i.e. 6'1" Boxer & Klip-It = 6'3" Thunderbolt Shelving Units Also Available With Offset Posts 1" On Centers (See Page 12) and Clip (See Page 20) OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB WIDE x 7 1 HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB WIDE x 7 1 HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB WIDE x 7 1 HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB WIDE x 7 1 HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB SHELVES S=Starter A=Add-on Unit Type B=Boxer K=Klip-It T=Thunderbolt Note: 36 Deep Shelving Available. See price list for components 7 SHELVES 36 WIDE x 7 1 HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB WIDE x 7 1 HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB WIDE x 7 1 HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB WIDE x 7 1 HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB WIDE x 7 1 HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB

16 Tri-Boro Open & Closed Type Shelving Units 5 SHELVES 21" HIGH OPEN TYPE BOXER TM (BOX-SHELF): 22 GA., 20 GA. and 18 GA. UNIT NUMBERS ON THIS PAGE ARE 20 GA. ADD L FOR 22 GA., X FOR 18 GA. 5 SHELVES 36 WIDE x 8 1 HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB WIDE x 8 1 HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB WIDE x 8 1 HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB SHELVES Note: Dimensions are for posts 1-1/2" on centers Dimensions for posts on 1" centers will be different. OSB NOTE: Add 2" to the height of each unit for Thunderbolt, O=Open C=Closed i.e. 6'1" Boxer & Klip-It = 6'3" Thunderbolt Shelving Units Also Available With Offset Posts 1" On Centers (See Page 12) and Clip (See Page 20) 6 SHELVES 36 WIDE x 8 1 HIGH 21" OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB WIDE x 8 1 HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB WIDE x 8 1 HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB SHELVES S=Starter A=Add-on Unit Type B=Boxer K=Klip-It T=Thunderbolt 7 SHELVES 36 WIDE x 8 1 HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB WIDE x 8 1 HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB WIDE x 8 1 HIGH OSB OAB OSB OAB OSB OAB OSB OAB " OSB OAB Note: 36 Deep Shelving Available. See price list for components Steel Shelving 8 1 HIGH CLOSED TYPE BOXER TM (BOX-SHELF): 22 GA., 20 GA. and 18 GA. UNIT NUMBERS ON THIS PAGE ARE 20 GA. ADD L FOR 22 GA., X FOR 18 GA. 5 SHELVES 36 WIDE x 8 1 HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB WIDE x 8 1 HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB WIDE x 8 1 HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB SHELVES 36 WIDE x 8 1 HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB WIDE x 8 1 HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB WIDE x 8 1 HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB SHELVES 36 WIDE x 8 1 HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB WIDE x 8 1 HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB WIDE x 8 1 HIGH CSB CAB CSB CAB CSB CAB CSB CAB " CSB CAB