AXIAL FANS & VANEAXIAL FANS
|
|
|
- Sybil Carter
- 5 years ago
- Views:
Transcription
1 AXIAL FANS & VANEAXIAL FANS TYPE MPV APPLICATIONS Typical application for this fan is mechanical ventilation of cargo rooms, engine room a.o. Where you have transportation of big air volumes at relative small pressure drops. In duct, or duct-top mounted. MPV-A1 For low volumes and moderate pressure drops up to high volumes and low pressure drops. Preferably where system resistance are on the inlet end, i.e. in normal exhaust, of the ventilation system. Care should be taken when installed in systems where the resistance is at the exhaust end, particularly if this occurs shortly after the fan. The resulting whirl can increase the resistance to a multiple of the computed values. MPV-D1 For low volumes and moderate pressure drops up to high volumes and average pressure drops. Preferably where system resistance are at the exhaust end. HVAC, air circulation and exhaust system. With D impeller with various pitch angels to suit specified capacities and pressures. The blades are also adjustable at rest. With type D impeller, the fan will also be equipped with guide vanes. The MPV - can be delivered in the range from size no 26 to size no 16. DESIGN Long experience has contributed to a simple construction, with the propeller mounted directly to the motor shaft, combining the best of simplicity and reliability with the lowest possible price. Also tailor made solutions to meet customers specification, like spark proof design. EXECUTION Normally manufactured in Grade A ship steel hot dip galvanized. Other materials as sea water resistant aluminium or stainless steel on request. The MPV - are supplied in many executions of different types of material. IMPELLER The impeller is made of salt- and ammonia resistant aluminium, aerodynamically shaped and balanced, or made of plastic (Polyamide). It is performed in two types. Type A: Cast in one unit ELECTRIC MOTOR The fans are usually supplied with standard squirrel caged inductive electric motors. They may also be supplied with other types of electric motors, like explosion proof or 2-speed motors. ACCESSORIES - Countra flanges - Protection grid inlet/outlet (included for MPV E and MPV B) - Feet for horizontal-/vertical mounting - Flexible connection set (inlet/outlet) - External terminal box - Ex execution with anti-spark track - Vibration dampers
2 AXIAL FANS MPV - A1B MPV - A1K MPV - A1E MPV - A1M
3 NYBORG AXIAL FLOW FAN Type "B" MPV - A1B 4 off, holes Ø H O D O D1 B A G E K B A GENERAL DESCRIPTION : MPV A B Ø D Ø D1 E K G Ø H Weight [kg] ex cl. motor AXIAL FLOW FAN, MPV-A1B, is a medium pressure axial fan, designed for static pressure up to 1 Pa. The MPV-A1B is made in heavy duty design, for industry, mining, marine and offshore applications. Ex-execution is also available. FAN FRAME and MOTOR PEDESTAL are normally made of steel (st.37), and are hot dipped galvanized. Other materials are also available as options like AISI 316L or Alum. The IMPELLER is designed for high efficiency and low noise. The impeller is made of a salt- and amoniaresistive aluminium alloy or PAG. WIRE GUARD: Included. MOTOR : The fans are normally delivered with 3-phased motors in accordance with the IEC recommendations, or special motors on request, like ex-motors R.Berge 15/11-2 MPV - A1B
4 NYBORG AXIAL FLOW FAN Type "E" MPV - A1E Z holes Ø K t1 O B O C O D O E t3 t1 A t2 F MPV A B C Ø D Ø E F Z x K t1 t2 t3 Max w eight fan [kg] x x x x x x x x x x x x x x R.Berge 18/ El.Motor, min IP54, IEC std 5 Contra Flange St.37 Option 4 Wire Guard St.37/HDG 3 Impeller Alum./PAG 2 Motor Bracket St.37/HDG 1 Fan Housing St.37/HDG Item Description Material Remarks MPV - A1E
5 NYBORG AXIAL FLOW FAN Type "K" MPV - A1K Motor Pedestal Ext. Terminal Box, Option Cable Entry Motor A Inspection Cover Impeller O D BCD=O C O B Z holes Ø K MPV A B C D T Z x K Weight [kg] ex cl.motor x x x x x x x x x x x x x x /4-2 R.Berge MPV - A1K
6 NYBORG AXIAL FLOW FAN Type "M" MPV - A1M Wheel Ext.Terminal Box, Option Cable Entry Hinges Hand-Grip on Door El.Motor A Motor Pedestal Impeller O D DC=O C O B T Z holes Ø K MPV A B C D T Z x K Weight x x x x x x x x x x /12-2 R.Berge MPV - A1M
7 SOUND POWER LEVELS (SWL) CALC. NYBORG AXIAL- FLOW FANS 5Hz FAN DATA db values at centre Hz Theor FAN MODEL Rpm Impeller dba MPV 25 A 145 A6T/ MP V 25 A 29 A6T / MP V 315 A /6/ MP V 315 A /6/ MPV 355 A /6/ MPV 355 A /8/ MPV 4 A 145 4/8/ MPV 4 A 29 4/8/ MPV 5 A 145 5/8/ MPV 5 A 29 5/1/ MPV 63 A 145 A7T/ MPV 71 A 145 A7T/ MPV 8 A 145 A7T/ MPV 9 A 145 A7T/ MPV 1 A 95 A7T/ MPV 1 A 145 A7T/ MPV 112 A 95 A7L/ MPV 112 A 145 A7L/ MPV 125 A 95 A7L/ MPV 125 A 145 A7L/ Sound power levels in db. ref W, internal values in fan openings. dba values applies to 1 m. distance based on a theoretical free field environment. The sound power level values above are only intended as a guide, and may be used for calculations for sound pressure levels. (heard by the human ear).
8 SOUND POWER LEVELS (SWL) CALC. NYBORG AXIAL- FLOW FANS 6Hz FAN DATA db values at centre Hz Theor FAN MODEL Rpm Impeller dba MPV 25 A 175 A6T/ MPV 25 A 35 A6T/ MPV 315 A /6/ MPV 315 A /6/ MPV 355 A /6/ MPV 355 A /8/ MPV 4 A 175 4/8/ MPV 4 A 35 4/8/ MPV 5 A 175 5/8/ MPV 5 A 35 5/1/ MPV 63 A 175 A7T/ MPV 71 A 175 A7T/ MPV 8 A 175 A7T/ MPV 9 A 175 A7T/ MPV 1 A 115 A7T/ MPV 1 A 175 A7T/ MPV 112 A 115 A7L/ MPV 112 A 175 A7L/ MPV 125 A 115 A7L/ MPV 125 A 175 A7L/ Sound power levels in db. ref W, internal values in fan openings. dba values applies to 1 m. distance based on a theoretical free field environment. The sound power level values above are only intended as a guide, and may be used for calculations for sound pressure levels. (heard by the human ear).
9 GALVANIZE SPECIFICATION STEEL FANS Step No Description Thickness Type Manufacturer 1 Cleaning - Nitric acid - 2 Galvanizing 8 my Zn -
10 NYBORG AXIAL FLOW FAN MPV 25 A Imp: A6T / 24 q(m³/s),5,1,15,2,25,3,35,4,45,5,55,6,65,7,75 Pressure drop, Ps & (Pa) Ps -Q 145 rpm Ps -Q 17 rpm Ps -Q 29 rpm Ps -Q 35 rpm Q(m³/h) v(m/s) Power consumption impeller, N (kw),2,15,1,5 35 rpm 29 rpm 175 rpm 145 rpm Q(m³/h) nyborg12.prs/32 MPV 25 A
11 NYBORG AXIAL FLOW FAN MPV 315 A Imp: A6T / 24 q(m³/s),1,2,3,4,5,6,7,8,9 1 1,1 1,2 1,3 1,4 Pressure drop, Ps & (Pa) Ps-Q 175 rpm Ps-Q 29 rpm Ps-Q 35 rpm Ps-Q 145 rpm Q(m³/h) v(m/s) Power consumption impeller, N (kw),8,7,6,5,4,3,2,1 35 rpm 29 rpm 175 rpm 145 rpm Q(m³/h) nyborg12.prs/19 MPV 315 A
12 NYBORG AXIAL FLOW FAN MPV 355 A Imp: A6T / 22 q(m³/s),1,2,3,4,5,6,7,8,9 1 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2 2,1 2,2 2,3 Pressure drop, Ps & (Pa) Ps -Q 145rpm Ps -Q 175rpm Ps -Q 29rpm Ps -Q 35rpm Q(m³/h) v(m/s) Power consumption impeller, N (kw) 1,4 1,2 1,8,6,4,2 35 rpm 29 rpm 175 rpm 145 rpm Q(m³/h) nyborg12.prs/27 MPV 355 A
13 NYBORG AXIAL FLOW FAN MPV 4 A Imp: A7L / 13 q(m³/s),2,4,6,8 1 1,2 1,4 1,6 1,8 2 2,2 2,4 2,6 2, Pressure drop, Ps & (Pa) Ps-Q 175 rpm Ps-Q 29 rpm Ps-Q 35 rpm 1 Ps-Q 145 rpm Q(m³/h) v(m/s) Power consumption impeller, N (kw) 2,5 2 1,5 1,5 35 rpm 29 rpm 175 rpm 145 rpm Q(m³/h) nyborg12.prs/15 MPV 4 A
14 NYBORG AXIAL FLOW FAN MPV 4 A Imp: A7T / 22 q(m³/s),2,4,6,8 1 1,2 1,4 1,6 1,8 2 2,2 2,4 2,6 2, Pressure drop, Ps & (Pa) Ps -Q 145 rpm Ps -Q 175 rpm Ps -Q 29 rpm Ps -Q 35 rpm Q(m³/h) v(m/s) Power consumption impeller, N (kw) 2,5 2 1,5 1,5 35 rpm 29 rpm 175 rpm 145 rpm Q(m³/h) nyborg12.prs/38 MPV 4 A
15 NYBORG AXIAL FLOW FAN MPV 45 A Imp: A7L / 14 q(m³/s),5 1 1,5 2 2,5 3 3,5 4 Pressure drop, Ps & (Pa) Ps -Q 145 rpm Ps -Q 175 rpm Ps -Q 35 rpm Ps -Q 29 rpm Q(m³/h) v(m/s) Power consumption impeller, N [kw] 5 4,5 4 3,5 3 2,5 2 1,5 1,5 35 rpm 29 rpm 175 rpm 145 rpm Q(m³/h) nyborg12.prs/35 MPV 45 A
16 NYBORG AXIAL FLOW FAN MPV 45 A Imp: A7T / 22 q(m³/s),5 1 1,5 2 2,5 3 3,5 4 4,5 Pressure drop, Ps & (Pa) Ps -Q 145 rpm Ps -Q 175 rpm Ps -Q 29 rpm Ps -Q 35 rpm Q(m³/h) v(m/s) Power consumption impeller, N (kw) 5,5 5 4,5 4 3,5 3 2,5 35 rpm 29 rpm 2 1, rpm,5 145 rpm Q(m³/h) nyborg12.prs/33 MPV 45 A
17 NYBORG AXIAL FLOW FAN MPV 5 A Imp: A7L / 16 q(m³/s),5 1 1,5 2 2,5 3 3,5 4 4,5 5 5, Pressure drop, Ps & (Pa) Ps-Q 145 rpm Ps-Q 175 rpm Ps-Q 29 rpm Ps-Q 35 rpm Q(m³/h) v(m/s) Power consumption impeller, N (kw) rpm 29 rpm 175 rpm 145 rpm Q(m³/h) nyborg12.prs/14 MPV 5 A
18 NYBORG AXIAL FLOW FAN MPV 5 A Imp: A7T / 22 q [m³/s],5 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 Pressure drop, Ps & [Pa] Ps - Q 145 rpm Ps - Q 175 rpm Ps -Q 35 rpm Ps -Q 29 rpm Q [m³/h] Power consumption impeller, N [kw] rpm 29 rpm 175 rpm 145 rpm Q [m³/h] nyborg12.prs/13 MPV 5 A
19 NYBORG AXIAL FLOW FAN MPV 63 A Imp: A7L / 18 q(m³/s) 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 4 Pressure drop, Ps & (Pa) Ps -Q 95 rpm Ps - Q 115 rpm Ps -Q 145 rpm Ps -Q 175 rpm 6 8 Q(m³/h) v(m/s) Power consumption impeller, N (kw) 3 2,5 2 1,5 1, Q(m³/h) 95 rpm 115 rpm 145 rpm 175 rpm nyborg12.prs/25 MPV 63 A
20 NYBORG AXIAL FLOW FAN MPV 63 A Imp: A7T / 22 q(m³/s) 5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 35 Ps -Q 175 rpm 3 Pressure drop, Ps & (Pa) Ps -Q 95 rpm Ps -Q 115 rpm Ps - Q 145 rpm Q(m³/h) v(m/s) Power consumption impeller, N (kw) 3,5 3 2,5 2 1,5 1, Q(m³/h) 95 rpm 115 rpm 145 rpm 175 rpm nyborg12.prs/26 MPV 63 A
21 NYBORG AXIAL FLOW FAN MPV 71 A Imp: A7L / 18 q [m³/s] Ps -Q 175rpm Pressure drop, Ps & [Pa] Ps -Q 145rpm Ps -Q 115rpm Ps -Q 95rpm Q [m³/h] Power consumption impeller,n [kw] rpm rpm rpm 115 rpm Q [m³/h] nyborg12.prs/21 MPV 71 A
22 NYBORG AXIAL FLOW FAN MPV 71 A Imp: A7T / 24 q [m³/s] Pressure drop, Ps & [Pa] Ps-Q 115rpm Ps-Q 95rpm Ps-Q 145rpm Ps-Q 175rpm Q [m³/h] Power consumption impeller, N [kw] rpm 115 rpm 145 rpm 175 rpm Q [m³/h] nyborg12.prs/2 MPV 71 A
23 NYBORG AXIAL FLOW FAN MPV 8 A Imp: A7L / 16 q [m³/s] 4,2 5,2 6,2 7,2 8,2 9,2 1,2 11,2 Pressure drop, Ps & [Pa] Ps-Q 95rpm Ps-Q 115rpm Ps-Q 145rpm Ps-Q 175rpm Q [m³/h] 8,3 9,3 1,3 11,3 12,3 13,3 14,3 15,3 16,3 17,3 18,3 19,3 2,3 21,3 22,3 Power consumption impeller, N [kw] rpm 115rpm 145rpm 175rpm Q [m³/h] nyborg12.prs/3 MPV 8 A
24 NYBORG AXIAL FLOW FAN MPV 8 A Imp: A7T / 22 q [m³/s] Pressure drop, Ps & [Pa] 7 Ps-Q 175rpm 6 5 Ps-Q 145rpm 4 3 Ps-Q 115rpm 2 Ps-Q 95rpm Q [m³/h] Power consumption impeller, N [kw] rpm 115rpm 145rpm 175rpm Q [m³/h] nyborg12.prs/28 MPV 8 A
25 NYBORG AXIAL FLOW FAN MPV 9 A Imp: A7L / 16 q [m³/s] 4,2 5,2 6,2 7,2 8,2 9,2 1,2 11,2 12,2 13,2 14,2 15,2 9 8 Pressure drop, Ps & [Pa] Ps-Q 95rpm Ps-Q 115rpm Ps-Q 145rpm Ps-Q 175rpm Q [m³/h] 15 6,5 8,5 1,5 12,5 14,5 16,5 18,5 2,5 22,5 Power consumption impeller, N [kw] rpm 115rpm 145rpm 175rpm Q [m³/h] nyborg12.prs/5 MPV 9 A
26 NYBORG AXIAL FLOW FAN MPV 9 A Imp: A7T / 22 q [m³/s] 5,6 6,6 7,6 8,6 9,6 1,6 11,6 12,6 13,6 14,6 15,6 16,6 17,6 18,6 1 9 Pressure drop, Ps & [Pa] Ps-Q 95rpm Ps-Q 115rpm Ps-Q 145rpm Ps-Q 175rpm Q [m³/h] 8,7 13,7 18,7 23,7 28,7 2 Power consumption impeller, N [kw] Q [m³/h] 95rpm 115rpm 145rpm 175rpm nyborg12.prs/6 MPV 9 A
27 NYBORG AXIAL FLOW FAN MPV 1 A Imp: A7L / 16 q [m³/s] Ps-Q 175rpm 7 Pressure drop, Ps & [Pa] Ps-Q 95rpm Ps-Q 115rpm Ps-Q 145rpm Q [m³/h] 8,8 1,8 12,8 14,8 16,8 18,8 2,8 22,8 24,8 26,8 Power consumption impeller N [kw] rpm 115rpm 145rpm 175rpm Q [m³/h] nyborg12.prs/7 MPV 1 A
28 NYBORG AXIAL FLOW FAN MPV 1 A Imp: A7T / 21 q [m³/s] Ps-Q 175rpm 9 8 Pressure drop, Ps & [Pa] Ps-Q 95rpm Ps-Q 115rpm Ps-Q 145rpm Q [m³/h] Power consumption impeller, N [kw] rpm 115rpm 145rpm 175rpm Q [m³/h] nyborg12.prs/8 MPV 1 A
29 NYBORG AXIAL FLOW FAN MPV 112 A Imp: A7L / 16 q(m³/s) Pressure drop, Ps & [Pa] Ps-Q 145rpm Ps-Q 115rpm Ps-Q 95rpm Ps-Q 175rpm Q(m³/h) v(m/s) Power consumption impeller, N [kw] rpm 145 rpm 115 rpm 95 rpm Q(m³/h) nyborg2.prs/15 MPV 112 A
30 NYBORG AXIAL FLOW FAN MPV 112 A Imp: A9T / 21 q(m³/s) Pressure drop, Ps & [Pa] Ps-Q 145rpm Ps-Q 115rpm Ps-Q 95rpm Ps-Q 175rpm Q(m³/h) Power consumption impeller, N [kw] v(m/s) 175 rpm 145 rpm 115 rpm 95 rpm Q(m³/h) nyborg2.prs/14 MPV 112 A
31 NYBORG AXIAL FLOW FAN MPV 125 A Imp: A7L / 16 q(m³/s) Pressure drop, Ps & [Pa] Ps-Q 115rpm Ps-Q 95rpm Ps-Q 85rpm Ps-Q 7rpm Ps-Q 145rpm Power consumption impeller, N [kw] Q(m³/h) v(m/s) 95rpm 85rpm 7rpm 115rpm 145rpm Q(m³/h) nyborg9.prs/15 MPV 125 A
32 NYBORG AXIAL FLOW FAN MPV 125 A Imp: A9T / 21 q(m³/s) Pressure drop, Ps & [Pa] Ps-Q 115rpm Ps-Q 95rpm Ps-Q 85rpm Ps-Q 7rpm Ps-Q 145rpm Q(m³/h) Power consumption impeller, N (kw) v(m/s) Q(m³/h) 95rpm 85rpm 7rpm 115rpm 145rpm nyborg9.prs/14 MPV 125 A
33 NYBORG AXIAL FLOW FAN MPV 14 A Imp: A9T / 22 q(m3/s) P res s ure drop, P s & P d [P a] P s -Q 95rpm P s -Q 85rpm P s -Q 7rpm P s -Q 115 rpm P d Q(m3/h) v(m/s) Power consumption impeller, N [kw] rpm rpm 16 85rpm rpm Q(m3/h) nyborg9.prs/17 MPV 14 A
34 VANEAXIAL FANS MPV - D1K WOMR - 25K 5K WOM MPV -D1E MPV - D1M WOMB - 4K 5K WOM(O)
35 NYBORG VANEAXIAL FAN Type "E" MPV - D1E O D2 A E t1 t2 Z holes Ø K O D1 O C O B MPV A B C D1 D2 E t1 t2 Z x K x x x x x x x x x x x x /12-2 R.Berge MPV - D1E
36 NYBORG VANEAXIAL FAN Type "K" MPV - D1K Ext. Terminal Box, Option Cable Entry Inspection cover Motor A Guide Vanes Impeller O D BCD = O C O B Z holes Ø K MPV A B C D T Z x K Weight [kg] ex cl.motor x x x (1) 12x14 52 (65) x (1) 16x14 81 (132) (1) 16x (22) (1) 16x (236) (1) 16x19 23 (336) (1) 2x (377) (1) 2x (48) (1) 24x14 41 (588) (1) 32x (195) /12-2 R.Berge MPV - D1K
37 NYBORG VANEAXIAL FAN Type "M" MPV - D1M Wheel Ext.Terminal Box, Option Cable Entry Hinges Hand-Grip on Door El.Motor A Guide Vanes Impeller O D DC=O C O B T Z holes Ø K MPV A B C D T Z x K Weight [kg] ex cl.motor x x x x x x x x x x /12-2 R.Berge MPV - D1M
38 NYBORG VANEAXIAL FAN Speed 29 rpm (5Hz) MPV 25 D WOMR 25K ,,1,2,3,4,5 q [m 3 /s] rpm C -,2 kw B -,19 kw A -,1kW Pressure drop, Ps & [Pa] A B C 5 P d Q [m 3 /h] nybmw_xls MPV 25 D WOMR 25K
39 NYBORG VANEAXIAL FAN Speed 34 rpm (6Hz) MPV 25 D WOMR 25K ,,1,2,3,4,5 q [m 3 /s] rpm C -,35 kw B -,32 kw A -,19kW Pressure drop, Ps & [Pa] A B C 1 P d Q [m 3 /h] nybmw_xls MPV 25 D WOMR 25K
40 NYBORG VANEAXIAL FAN Speed 29 rpm (5Hz) MPV 315 D WOMR-31K ,3,4,5,6,7,8,9 1, 1,1 q [m 3 /s] 7 Pressure drop, Ps & [Pa] % 62% 64% 65% 64% 64% 29 rpm 55 -,99 kw 5 -,81 kw 45 -,66 kw 4 -,53 kw 35 -,42kW 3 -,36 kw 2 η max P d Q [m 3 /h] nybmw_xls1-3 MPV 315 D WOMR - 31K
41 NYBORG VANEAXIAL FAN Speed 35rpm (6Hz) MPV 315 D WOMR-31K q [m³/s] 3,4,5,6,7,8,9 1 1,1 1, Static p r e s sure [P a ] rpm 3 -,64kW 35 -,72kW 4 -,75kW 45 -,77kW Q [m³/h] N-mw4-29 MPV 315 D WOMR - 31K
42 NYBORG VANEAXIAL FAN Speed 29 rpm (5Hz) Imp: WOM ,5,6,7,8,9 1, 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2, q [m3/s] % 6% 91dBA 95dBA 29 rpm 6-1,6kW 55-1,22kW 5-1,kW 45 -,87kW 5 Pressure drop, Ps & [Pa] max 6% 89dBA 62% 91dBA P d Q [m 3 /h] nybmw_xls1-1 MPV 355 D
43 NYBORG VANEAXIAL FAN Speed 35 rpm (6Hz) MPV 355 D ,8 1, 1,2 1,4 1,6 1,8 2, 2,2 2,4 2,6 q [m 3 /s] % 96dBA 78% 6% 95dBA 99dBA 35 rpm 6-2,8 kw 55-2,1 kw 5-1,74kW 45-1,5 kw Pressure drop, Ps & [Pa] max 6% 93dBA P d Q [m 3 /h] nybmw_xls1-2 MPV 355 D1
44 q [m3/s] NYBORG VANEAXIAL FAN Speed 2855 rpm (5Hz) 1 1,2 1,4 1,6 1,8 2 2,2 2,4 2,6 2,8 MPV 4 D1 WOM(O) 4 S tatic pres s ure [P a] ηmax 79% 78 89dB(A) rpm 55-1,4 kw 6-1,65kW 65-2,2 kw 2 P d Q [m3/h] Loi [db ] N85 L AO [db ( A) ] f [Hz] Acoustic pressure level spectrum L oi measured close to optimum working point for n=2885 r.p.m. and angle 55, distance = 1m n-mw4prs-2 MPV 4 D1 WOM(O) 4
45 NYBORG VANEAXIAL FAN Speed 35 rpm (6Hz) MPV 4 D1 WOM(O) ,4 1,6 1,8 2, 2,2 2,4 2,6 2,8 3, 3,2 q [m 3 /s] % 74% 95dBA 35 rpm 65-3,45 kw 6-2,71 kw 55-2, kw 8 93dBA Pressure drop, Ps & [Pa] max 79% 93dBA 55 6 P d Q [m 3 /h] nybmw_xls MPV 4 D1 WOM(O) 4
46 NYBORG VANEAXIAL FAN Speed 29rpm (5Hz) MPV 5 D WOMR 5K WOMB 5K q [m³/s] 1,5 2 2,5 3 3,5 4 4,5 5 Static p r essure [ P a] rpm ,6kW ,3kW ,3kW ,3kW 1 5-6,7kW Q [m³/h] N-mw4-26 MPV 5 D WOMR 5K WOMB 5K
47 NYBORG VANEAXIAL FAN Speed 35rpm (6Hz) MPV 5 D WOMR 5K WOMB 5K q [m³/s] 1,75 2 2,25 2,5 2,75 3 3,25 3,5 3,75 4 [Pa] pressure Static Q [m³/h] 35 rpm 32-4,8kW 35-5,7kW 4-7,4kW N-mw4-27 MPV 5 D WOMR 5K WOMB 5K
48 q [m3/s] NYBORG VANEAXIAL FAN Speed 146 rpm (5Hz) 2 2,5 3 3,5 4 4,5 5 5,5 MPV 63 D1 WOM(O) - 63 S tatic pres s ure [P a] ηmax 78% db(a) P d rpm 5-1,2kW 55-1,6kW 6-2,1kW Q [m3/h] Loi [db ] N8 L AO [db ( A) ] f [Hz] Acoustic pressure level spectrum L oi measured close to optimum working point for n=146 r.p.m. and angle 55, distance = 1m 5 n-mw4prs-4 MPV 63 D1 WOM(O) - 63
49 NYBORG VANEAXIAL FAN Speed 175 rpm (6Hz) MPV 63 D1 WOM(O) - 63 q [m3/s] 2,5 3 3,5 4 4,5 5 5,5 S tatic pres s ure [P a] ηmax 78% 87dB(A) rpm 5-2,1kW 55-2,8kW Q [m3/h] 88 5 P d n-mw4prs-5 MPV 63 D1 WOM(O) - 63
50 q [m3/s] NYBORG VANEAXIAL FAN Speed 147 rpm (5Hz) 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 MPV 71 D1 WOM(O) - 71 S tatic pres s ure [P a] ηmax 74% db(a) P d rpm 5-3,kW 55-3,7kW 6-4,8kW Q [m3/h] Loi [db ] N85 L AO [db ( A) ] f [Hz] Acoustic pressure level spectrum L oi measured close to optimum working point for n=147 r.p.m. and angle 55, distance = 1m n-mw4prs-6 MPV 71 D1 WOM(O) - 71
51 NYBORG VANEAXIAL FAN Speed 175 rpm (6Hz) MPV 71 D1 WOM(O) - 71 q [m3/s] 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 S tatic pres s ure [P a] ηmax 74% 73 93dB(A) P d rpm 5-5,1kW 55-6,3kW 58-8,1kW Q [m3/h] n-mw4prs-7 MPV 71 D1 WOM(O) - 71
52 q [m3/s] NYBORG VANEAXIAL FAN Speed 149 rpm (5Hz) MPV 8 D1 WOM(O) - 8 S tatic pres s ure [P a] ηmax 81% 8 9 db(a) rpm 55-5,1kW 6-6,4kW n-max 2 P d Q [m3/h] Loi [db ] N85 L AO [db ( A) ] f [Hz] Acoustic pressure level spectrum L oi measured close to optimum working point for n=149 r.p.m. and angle 5 5, distance = 1m n-mw4prs-8 MPV 8 D1 WOM(O) - 8
53 NYBORG VANEAXIAL FAN Speed 175 rpm (6Hz) MPV 8 D1 WOM(O) - 8 S tatic pres s ure [P a] 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 1 1, , , q [m3/s] ηmax 81% 8 94dB(A) 175 rpm 55-8,3kW 6-1,4kW Q [m3/h] P d n-mw4prs-9 MPV 8 D1 WOM(O) - 8
54 NYBORG VANEAXIAL FAN Speed 96 rpm (5Hz) MPV 9 D1 WOM(O) - 9 q [m3/s] S tatic pres s ure [P a] ηmax 8% 8 89dB(A) P d 6 96 rpm 45-2,2kW 5-2,8kW 55-3,5kW 6-4,2kW Q [m3/h] n-mw4prs-1 MPV 9 D1 WOM(O) - 9
55 NYBORG VANEAXIAL FAN Speed 115 rpm (6Hz) MPV 9 D1 WOM(O) - 9 q [m3/s] S tatic pres s ure [P a] ηmax 8% 8 93dB(A) P d rpm 45-3,8kW 5-4,8kW 55-6,kW 6-7,3kW Q [m3/h] n-mw4prs-11 MPV 9 D1 WOM(O) - 9
56 q [m3/s] NYBORG VANEAXIAL FAN Speed 145 rpm (5Hz) MPV 9 D1 WOM(O) - 9 S tatic pres s ure [P a] ηmax 8% 8 99 db(a) rpm 45-8,kW 5-1,2kW 55-12,8kW 6-15,5kW Q [m3/h] P d N Loi [db ] L AO [db (A)] f [Hz] Acoustic pressure level spectrum L oi measured close to optimum working point for n=148 r.p.m. and angle 5, distance = 1m n-mw4prs-12 MPV 9 D1 WOM(O) - 9
57 NYBORG VANEAXIAL FAN Speed 175 rpm (6Hz) MPV 9 D1 WOM(O) - 9 q [m3/s] S tatic pres s ure [P a] ηmax 8% 8 13dB(A) 175 rpm 45-13,2kW 5-16,9kW 55-21,2kW Q [m3/h] P d n-mw4prs-13 MPV 9 D1 WOM(O) - 9
58 NYBORG VANEAXIAL FAN Speed 96 rpm (5Hz) MPV 1 D1 WOM(O) - 1 q [m3/s] S tatic pres s ure [P a] ηmax 83% 91dB(A) rpm 5-3,3kW 55-4,1kW 6-6,kW 6 1 P d Q [m3/h] n-mw4prs-14 MPV 1 D1 WOM(O) - 1
59 NYBORG VANEAXIAL FAN Speed 115 rpm (6Hz) MPV 1 D1 WOM(O) - 1 q [m3/s] S tatic pres s ure [P a] ηmax 83% 95dB(A) rpm 5-5,6kW 55-7,kW 6-1,3kW Q [m3/h] P d n-mw4prs-15 MPV 1 D1 WOM(O) - 1
60 q [m3/s] NYBORG VANEAXIAL FAN Speed 148 rpm (5Hz) MPV 1 D1 WOM(O) S tatic pres s ure [P a] ηmax 83% 11dB(A) rpm 5-12,kW 55-15,kW 6-22,kW Q [m3/h] P d N1 1 9 Loi [db ] L AO [db (A) ] f [Hz] Acoustic pressure level spectrum L oi measured close to optimum working point for n=148 r.p.m. and angle 5, distance = 1m 5 n-mw4prs-16 MPV 1 D1 WOM(O) - 1
61 NYBORG VANEAXIAL FAN Speed 175 rpm (6Hz) MPV 1 D1 WOM(O) - 1 q [m3/s] ηmax 83% 15dB(A) rpm 5-19,8kW 55-24,8kW S tatic pres s ure [P a] P d Q [m3/h] v [m/s ] n-mw4prs-17 MPV 1 D1 WOM(O) - 1
62 q [m³/s] NYBORG AXIAL FLOW FAN Speed 985 rpm (5Hz) MPV 112 D1 WOM(O) ηmax 77% 78 87dB(A) rpm 45-6,2kW 5-8,5kW 55-1,8kW 6-13,3kW Q [m³/h] N85 f [Hz] Acoustic pressure level spectrum Loi measured close to optimum working point for n=985 r.p.m. and angle n-mw4prs-18 MPV 112 D1 WOM(O) - 112
63 NYBORG VANEAXIAL FAN Speed 1175 rpm (6Hz) MPV 112 D1 WOM(O) q [m3/s] S tatic pres s ure [P a] ηmax 77% 78 91dB(A) P d rpm 45-1,5kW 5-14,5kW 55-18,4kW 6-22,6kW Q [m3/h] n-mw4prs-19 MPV 112 D1 WOM(O) - 112
64 q [m3/s] NYBORG VANEAXIAL FAN Speed 985 rpm (5Hz) MPV 125 D1 WOM(O) S tatic pres s ure [P a] ηmax 79% 79 96dB(A) P d rpm 5-11,5kW 55-14,kW 6-17,5kW 65-22,5kW Q [m3/h] Loi [db ] N9 L AO [db ( A)] f [Hz] Acoustic pressure level spectrum L oi measured close to optimum working point for n=985 r.p.m. and angle 5, distance = 1m 5 5 n-mw4prs-2 MPV 125 D1 WOM(O) 125
65 NYBORG VANEAXIAL FAN Speed 118 rpm (6Hz) MPV 125 D1 WOM(O) q [m3/s] S tatic pres s ure [P a] ηmax 79% 99dB(A) P d rpm 5-19,8kW 55-24,kW 6-3,kW Q [m3/h] n-mw4prs-21 MPV 125 D1 WOM(O) - 125
66 q [m3/s] NYBORG VANEAXIAL FAN Speed 89 rpm (6Hz) MPV 16 D1 WOM(O) S tatic pres s ure [P a] ηmax 85% 98dB(A) Q [m3/h] P d rpm 45-33,5kW 5-44,kW 55-54,kW N95 9 Loi [db ] L AO [db (A)] f [Hz] Acous tic pres s ure level s pectrum L oi meas ured clos e to optimum working point for n=89 r.p.m. and angle 5, distance = 1m n-mw4prs-22 MPV 16 D1 WOM(O) - 16
Ventilation Fans and Equipment
o Ventilation Fans and Equipment Accommodate Flexible Solutions High Product Quality High delivery capability Environmentally Products NYBORG AS Sykkylven NORWAY Updated 23.4.29 NYBORGMAWENT S.A. Malbork
PORTABLE GAS FREEING FAN
PORTABLE GAS FREEING FAN TYPE MPV APPLICATIONS Typical application for this fan is mechanical ventilation of hazardous zones and cargo tanks onboard ships. To be mounted into tank openings on deck. DESIGN
EX PROOF FANS for Hazardous Area
EX PROOF FANS for Hazardous Area PUV - D1RX PPV - D1OX SUV - B1RX HSV - B1(AFX) N-623 SYKKYLVEN, NORWAY TEL +47 7 25 4 8 - FAX +47 7 25 29 8 office@nyborgfan.com - www.nyborgfan.com PROPELLER EXHAUST FAN
Size and Configurations
!!"#!""!"$%!!" &'()&('& AK Axial Flow Fans the high efficiency direct-driven fan with adjustable pitch impeller specially designed to operate with low noise emission and vibration that meets the stringent
Hison Axial Flow Fans
Hison Axial Flow Fans Introduction Hison Marine Axial Flow Fans, formerly know as Howden Fans are manufactured to international Quality Standard. Axial flow fans are available from sizes 35mm to 18mm diameter,
Hison Axial Flow Fans
Hison Axial Flow Fans Introduction Hison Marine Axial Flow Fans, formerly know as Howden Fans are manufactured to international Quality Standard. Axial flow fans are available from sizes 35mm to 18mm diameter,
Explanation of AR Series Ventilator Products. Fan type code D S AR AE
Series Axial Fan Explanation of Series Ventilator Products Fan type code 450-7 /26 D -2 F400 Smoke Extract Fan 400 C, 300 C Number of Poles D S Three Phase Single Phase AE AE Features and construction
hore PRODUCT CATALOGUE nd Offsh arine an ms for Ma & Refrig CENTRIFUGAL FANS HV VAC &
hore nd Offsh arine an ms for Ma geration System & Refrig HV VAC & PRODUCT CATALOGUE CENTRIFUGAL FANS ! "# $ % & " ' (! ) * +,+( -../01..2 PRODUCT CATALOGUE 73-16 CENTRIFUGAL FANS CONTENT PAGE 1. CENTRIFUGAL
Short casing. Long casing (L version) Commercial premises
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Long casing (L version) Short casing A P P L I C A T I O N S Range of adjustable pitch cased axial flow fans. Casings formed from rolled
Axial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.
xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof
S ACON SEACON SEACO QUIPMEN EQUIPMENTS SEACON EQUIPMENTS
S ACON EQ NTS ACON E NTS A S EQ A TS TS TS TS TS E AC AC AC AC AC AC S S UIP IPME IPME QU P QUI QUI EQ EQUI Q EQ EQ EQ EQ EN EN SE SE SEAC AC AC AC AC AC AC ACO EQUIP E MEN SEACO EQUIPMEN A EQU EQU AC
AXIAL FANS Catalogue CN0050C01 May 2008
ADTA AXIAL FANS Catalogue CN0050C01 May 2008 ADTA AXIAL FANS Catalogue CN0050C01 May 2008 Construction Specifications Impellers: Breezax aerfoil blades are available in four types of material: Glass Reinforced
Bifurcated Case Axial Fans (BIFA)
Bifurcated Case Axial Fans (BIFA) Sizes 250 to 1000 dia Motors protected to IP55 Motor insulation Class F Maximum ambient temperature 200 C Speed controllable via transformer or inverter (when the ambient
TGT Series Adjustable Pitch Fans
CYLINDRICAL CASED AXIAL FLOW FANS Series Adjustable Pitch Fans Range of adjustable pitch aerofoil blade, cased axial flow fans.casings formed from rolled sheet steel with a corrosion resistant hot dipped
DAMPERS LSS - R. N-6230 SYKKYLVEN, NORWAY TEL FAX
DAMPERS LSS - R LSS / SOD circular single blade shut off damper SSVent rectangular multiblade shut off damper S.Ventil R1OVL circular single blade weather tight damper/valve RD circular regulating damper
NOVENCO FAN CATALOGUE
NOVENCO FAN CATALOGUE WWW.NOVENCO-MARINE.COM ZERAX AXIAL FLOW FANS PRODUCT The Novenco ZerAx series of axial flow fans use innovative design to reduce power consumption and to better fan efficiency. The
Medium Pressure Centrifugal Fans
Medium Pressure Centrifugal Fans 2012 Edition ...About Axair Fans UK Application Knowledge: Over 20 years experience in general air movement; including corrosive, explosive and hot fume handling. Stock
TGT Series Adjustable Pitch Fans
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Range of adjustable pitch aerofoil blade, cased axial flow fans.casings formed from rolled sheet steel with a corrosion resistant hot
Section 4. Axial Fans - Section 4
Axial Flow Fans Section 4 Fläkt Woods offers a wide range of axial flow fans for general air movement and special applications such as emergency high temperature smoke extract and pressurisation. ATEX
MAJAX-2 GENERAL SPECIFICATION
MAJAX-2 GENERAL SPECIFICATION Majax-2 axial flow fans are manufactured in diameters ranging from 315mm to 2000mm (available in 2250mm on request), and incorporate manually adjustable pitch aluminium bladed
AAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES:
AAVC HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES: Accessories Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average
CONTENTS. Page. Adjustable Axial Pitch Flow Fans 3. Dimensions 4. AP056 Performance Curves 5. AP056 Sound Performance 6. AP063 Performance Curves 7
CONTENTS Page Adjustable Axial Pitch Flow Fans 3 Dimensions 4 AP056 Performance Curves 5 AP056 Sound Performance 6 AP063 Performance Curves 7 AP063 Sound Performance 8 AP071Performance Curves 9 AP071 Sound
Duct mounted fans. axial flow. Pacific HVAC Engineering Tel. Australia NZ
Duct mounted fans axial flow Pacific HVAC Engineering 215 www.pacifichvac.com Tel. Australia 13 733 833 NZ 8 1 326 6 5 4 3 2 1 5 1 15 2 7 6 5 4 3 2 1 3 2.5 2 1.5 1.5 1 15.5 1 1.5 2 2.5 3 3.5 Volume m 3
CONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series
Range of cylindrical cased axial fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester
Short casing. Long casing (L version) Highly versatile range due to different number of available blades and adjustable pitch angles
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Additional Information Standard air direction: form (B) configuration (Impeller over ). models description: incorporated an "L" after blade pitch angle. E.g.
Axial fans. What s more, non-stock models are normally available within two weeks.
Axial fans 7 sees the introduction of a new production line at Xpelair s Peterborough plant for the Scimitar Sickle blade fans in Plate, Short Case and Roof versions up to 63mm. Scimitar will join an impressive
supplied in Form (B) configuration. Airflow over Impeller- Motor.
CYLINDRICAL CASED AXIAL FLOW FANS COMPACT Series TCBB-TCBT (Aluminium impellers) and TCFB-TCFT (Plastic impellers) NEW VERSIONS Description The S&P Cylindrical Cased Axial Fans feature, as the name suggests,
CYLINDRICAL CASED AXIAL FLOW FANS
- Adjustable pitch fans Range of adjustable pitch aerofoil blade, cased axial flow fans. Casings formed from rolled sheet steel with a corrosion resistant hot dipped galvanised finish. All models incorporate
BULLETIN 456. July 1997 VANEAXIAL FANS. Type W Direct Drive/Belt Driven. Model VW Direct Drive. Model VWBD Belt Driven
BULLETIN 456 July 1997 VANEAXIAL FANS Type W Direct Drive/Belt Driven Model VW Direct Drive Model VWBD Belt Driven Aerovent certifies that the Type W Vaneaxial Fans shown herein are licensed to bear the
Centrifugal performance characteristics with axial flow pattern: RADAX VAR
High pressure in-line mixed-flow fans RADAX VAR Centrifugal performance characteristics with axial flow pattern: RADAX VAR COMPACT PRESSURE-RESISTANT UNIVERSAL In their compact casing, the RADAX VAR impellers
CASED 24 Designed for emergency ventilation of hot fire smoke applications 300 C or 400 C for two hours operation, CE marked to EN12101-3 2002 All casings are hot dipped galvanised Sizes from 315mm to
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.50 203 PERFORMANCE CURVE 0.80 204 PERFORMANCE CURVE 1.00 205 PERFORMANCE
MegaBox Product-specific information
MegaBox Product-specific information Application Noise-encapsulating centrifugal fans with retractable motor impeller unit and motor located outside the air flow Suitable for rough operating conditions
In-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information.
In-Line Fans xial-flow Fans Wall Versions xial-flow Fans Cased Versions Roof Fans Fans TEX Centrifugal Fans VISP/VSP Centrifugal Fans Side Channel lowers Chip Extractors COMPCT 44 TCx, TCTx FC 54 FC-V
Centrifugal medium-pressure fans fitted with multi-blade
CMP/ATEX CMP/ATEX impeller Centrifugal medium-pressure fans fitted with multi-blade with ATEX certification Centrifugal single-inlet, medium-pressure fans with casing and sheet steel impeller to work in
BSB SINGLE INLET BELT DRIVEN CENTRIFUGAL FANS WITH BACKWARD CURVED IMPELLERS
SINGLE INLET BELT DRIVEN CENTRIFUGAL FANS WITH BACKWARD CURVED IMPELLERS BSB 03.06-01 BSB SINGLE INLET BELT DRIVEN CENTRIFUGAL FANS WITH BACKWARD CURVED IMPELLERS Description Construction Fans are not
IN-LINE DUCT FANS MIXVENT-TD Fan Systems
IN-LINE DUCT FANS MIXVENT-TD Fan Systems NEW TD-EXTRACTOR KIT (see page 175) MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment
AND AXIAL FLOW FANS ECOFIT
AND AXIAL FLOW FANS with adjustable blades as standard fans, explosion proof design and smoke fans ECOFIT Rosenberg East Asia Pte Ltd 71 Ubi Crescent #08-04 Excalibur Centre Singapore 408571 Tel: +65 6846
CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB
CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB Applications The CMT-CMB range of fans are suitable for many general and OEM ventilation applications where the extract of nonhazardous heated air is required. The
DVAX-ARS. Roof-mounted unit for mechanical smoke extract
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and Heating Products Tunnel Fans DVAX- Roof-mounted unit for mechanical smoke extract 2 DVAX DVAX- Roof-mounted axial fan unit
Specifications. Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16).
Specifications Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16). Housings: PP* Single block strong high density UV treated and
CGT Series Adjustable Pitch Fans
AXIAL FLOW CABINET FAN CGT Series Adjustable Pitch Fans New Ø 400-450-500 Range of adjustable pitch aerofoil blade, axial flow cabinet fans.fan casing manufactured from heavy gauge galvanised sheet steel
IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems
IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment the MIXVENT-TD range
MARINE DUTY TUBEAXIAL & VANEAXIAL FANS
BULLETIN 420 November 2000 MARINE DUTY TUBEAXIAL & VANEAXIAL FANS Type MD Direct Drive Model MDTM, MDVM & MDVH Marine Duty Tubeaxial and Vaneaxial Fans Aerovent s Marine Duty Fans feature medium and high
AXICIAT VA. Axial fans. Smoke extraction F200/120 and F400/120. High available pressure
Smoke extraction F200/120 and F400/120 A complete range from 1250 to 95000 m 3 /s High available pressure Blade with variable pitch on stop APPLICATION Extraction or introduction of non-loaded air in the
Eco Mixed Flow (emf) Energy Saver. Terminal Box. Performance. Quality Assurance. Impellers. Accessories. Motors
Eco Mixed Flow (emf) High efficiency Mixed Flow Fan with guide vanes Available in sizes 355 to 710mm dia. IP54 Fan rating (duct mounted) Operating temperatures up to 80 C (see technical specification)
CGT Series Adjustable Pitch Fans
AXIAL FLOW CABINET FAN CGT Series Adjustable Pitch Fans New Ø 400-450-500 Range of adjustable pitch aerofoil blade, axial flow cabinet fans.fan casing manufactured from heavy gauge galvanised sheet steel
The Industrial Choice. Model VB Direct Drive. Model VBBD Belt Driven VANEAXIAL FANS. Direct Drive & Belt Driven Model VB / VBBD
The Industrial Choice. Model VB Direct Drive Model VBBD Belt Driven VANEAXIAL FANS Direct Drive & Belt Driven Model VB / VBBD BULLETIN 466 November 2000 Contents Construction Features Belt Driven... 3
Max. airflow m 3 /s Diam. min. Diam. max
Axial Fans Max. airflow m 3 /s Diam. min Diam. max 1% adjustable motor Assembly, any position Reversible (3% Reduction) Page Number AW AR AW.97 2 3 * * 13 AR.97 2 3 * * 134 ZSP 2.9 315 5 * * 13 ZAP 13.89
Novenco axial flow fans. ZerAx - Standard January 2010
Novenco axial flow fans ZerAx - Standard January 2010 Product facts Product The Novenco ZerAx series of axial flow fans uses innovative design to reduce power consumption by improving efficiency. As an
The Industrial Choice. Vane Section For Model VTBD. Model TTABD TUBEAXIAL & VANEAXIAL FANS. Type "T" Belt Driven Model TTABD / VTBD
The Industrial Choice. Vane Section For Model VTBD Model TTABD TUBEAXIAL & VANEAXIAL S Type "T" Belt Driven Model TTABD / VTBD BULLETIN 424-A November 1998 Model TTABD/VTBD Tubeaxial/Vaneaxial Fans Aerovent
400mm - 630mm diameter Volume flow up to 7.2m 3 /s ASED 42 Static pressures up to 1000 Pa High energy efficiency All casings are hot dipped galvanised Low installed noise levels protection IP55 Overheat
Airscrew 105 to 170 Vmax Vaneaxial Fans
Airscrew 5 to 17 Vmax Vaneaxial Fans General Vaneaxial Information Vmax Vaneaxial Fans comprise a combination of rotating impeller and stationary guide vanes, housed within an axial duct known as the fan
BIFLOW SB CON Product Brochure
BIFLOW SB CON Brochure Available for next day delivery with ELTA SELECT Bifurcated Conical Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum
HRS. Very high efficiency heat recovery units. from 300 to m³/h >90 % WITH HIGH EFFICIENCY HEAT RECOUPERATOR
4 Lmf Clima 6 FERRARO GROUP HRS Very high efficiency heat recovery units WITH HIGH EFFICIENCY HEAT RECOUPERATOR from 3 to 4. m³/h Air-handling unit designed and manufactured for nonresidential applications,
Centrifugal fan with highly efficient EC drive motor
Centrifugal fan with highly efficient EC drive motor simple and safe application and installation 2 Why HLU? 90 years of experience in the plastics processing market More than 10.000 m² production in Germany
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
Small centrifugal fans made of plastic
Small centrifugal fans made of plastic durable application-optimised wide range of variants 2 Small centrifugal fans made of plastic Index Small centrifugal fans made of plastic HF R 75-16 D and HF R 110-18
FLSD (E) Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information
(E) Atmospheres containing explosive GAS General information Flameproof totally enclosed three-phase asynchronous motors, FLSD (E) series, according to IEC 60034, 60038, 60072, 60079-0 and 60079-1, EN
REVOLUTION SLCX Product Brochure
REVOLUTION SLCX Brochure Available for next day delivery with ELTA SELECT ATEX Long Cased Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum
LSN Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information
General information Non-sparking totally enclosed threephase asynchronous motors, LSN series, according to IEC 60034, 60072, IEC 60079-1 and 60079-15. Single speed: power 0.75 to 90 kw 1, frame size 80
NEW Slimpak EC Box Fan (SLPT EC)
NEW Slimpak EC Box Fan (SLPT EC) Compact low profile design Duct Sizes 100 500mm Performance - Airflow 0.01 to 1.2m 3 /s, Pressure up to 650Pa Latest energy saving EC/DC motors Internal mounting IPX2 Manufactured
ROOFMASTER STEF-HT ROOF FAN
fire safety Air movement Roof Fans ROOFMASTER STEF-HT ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF-HT...3 Performance Data...4 Performance Table...5 General description...6 Fan Chart-explanation
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
CENTAXIAL TUBULAR CENTRIFUGAL FANS. BIA Airfoil Blade Design Direct Drive & Belt Driven Model CBD / CDD (Class I, II & III) Model CBD Belt Driven
Model CBD Belt Driven Model CDD Direct Drive CENTAXIAL TUBULAR CENTRIFUGAL FANS BIA Airfoil Blade Design Direct Drive & Belt Driven Model CBD / CDD (Class I, II & III) CATALOG 337 February 2004 Centaxial
CMA-B-C-D. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE CMA 204 PERFORMANCE CURVE CMB 205 PERFORMANCE CURVE CMC 206 PERFORMANCE
ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans
Hacer título más resumido ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans Construction Casing The fan casings are manufactured from heavy gauge galvanised sheet steel and
CENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue
CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalogue air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalogue Contents GENERAL Description and survey chart Application... 3 General Survey
Section 4 e c tio - P lat F a n s
Plate Fans Section 4 The Fläkt Woods Plate Fan Range is the result of detailed market analysis and intensive research and development by the world leaders in air movement technology. By setting and achieving
400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity
400ºC/2h centrifugal roof fans with horizontal or vertical air outlet : 400ºC/2h centrifugal roof fans with horizontal air outlet, hood in aluminium : 400ºC/2h centrifugal roof fans with vertical air outlet,
Plate mounted axial flow fans HXBR / HXTR Series
Plate mounted axial flow fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller, low sound level, protected against corrosion by cataforesis primer and a polyester
LEF/MEF LEX/MEX ATEX versions
Fan LEF/MEF 250-630 - LEX/MEX ATEX versions GEOVENT centrifugal fan LEX and MEX with closed backward curving B-wheel and directly driven flange motor. The fan is used for extraction within the industry
HXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series 0 017982 603075 A P P L I C A T I O N S Range of plate mounted axial fans manufactured from high grade galvanised steel
Radial roof fans - SMART-UL. Application. Stylistics. Structure. Efficiency adjustment. Acoustics
Application SMART-UL fans have been designed for general ventilation of buildings. They are meant for forwarding the dry air of maximum temperature 140 F, and dustiness not exceeding 0,3 g/m³, without
Sabre Plate Mounted Sickle Fans (VSP)
Sabre Plate Mounted Sickle Fans (VSP) Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance One shot die cast impeller, dynamically balanced for smoother operation
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series - ADJUSTABLE PITCH FANS
- ADJUSTABLE PITCH FANS Range of adjustable pitch aerofoil blade, cased axial flow fans. Casings formed from rolled sheet steel with a corrosion resistant hot dip galvanised finish. All models incorporate
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW)
NCF fans 50 Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
Multifunctional roof fans for large flows. Multifunctional roof fans, highly robust construction, for large flows
HTMH Multifunctional roof fans for large flows Multifunctional roof fans, highly robust construction, for large flows Fan: Painted galvanised sheet steel base plate Turnable impellers cast aluminium. Protection
DIRECT-AIR ILB / ILT Series Rectangular duct fans
IN-LINE DUCT FAN Series Rectangular duct fans Range of in-line rectangular duct fan manufactured from galvanised steel sheet and provided with an inspection cover that can be removed to access the motor/impeller
Model METRIC SHAFT WT (LBS) mm mm mm mm mm mm mm 572
FEATURES Computer designed, efficient performance, forward curved blower. Blower wheel hub is secured to the shaft with a locking keyway. Blower is secured to anti-vibration mounts within the cabinet.
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.75 203 PERFORMANCE CURVE 1.00 204 - CONSTRUCTIONS 300 SECTIONAL VIEW
ROOF MOUNTED AXIAL FLOW FANS HCTB / HCTT Series
asy to install Supports to facilitate installation in the roof. XTRACTION (type B) SUPPLY (type A) High quality steel sleeve nsuring the long life of the fan. Range of axial roof fans with horizontal air
Series TDA DIRECT DRIVEN MODEL: TDA- 450/9AA/8-8/ / Construction. Airflow Direction
DIRECT DRIVEN Series TDA Construction Double flanged casing is produced in mild steel or galvanised steel, available in short and long cased. The impeller having manually adjustable pitch blades is made
CENTRIFLOW 3D WITH AC MOTOR >> Technical catalouge
CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalouge air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalouge Contents GENERAL Description and survey chart Application... 3 General Survey
Powerful centrifugal fans for universal use: The product ranges TEM and REM
Powerful centrifugal fans for universal use: The product ranges TEM and REM The fan ranges TEM and REM offered by Nicotra Gebhardt do present a large fan programme of single inlet centrifugal fans which
Shut-off dampers. Type AK-Ex. For low-leakage shut-off of volume flows in potentially. explosive atmospheres (ATEX) PD AK-Ex 1.
X X testregistrierung Shut-off dampers Type ATEX-compliant parts and units For low-leakage shut-off of volume flows in potentially explosive atmospheres (ATEX) Circular shut-off dampers for shutting off
MAXFAN COMPAC » OFFERING HIGH PERFORMANCE, ROBUST DESIGN AND FLEXIBLE CONTROL AIR COMFORT FIRE SAFETY AIR MOVEMENT
AIR COMFORT FIRE SAFETY AIR MOVEMENT MAXFAN COMPAC» OFFERING HIGH PERFORMANCE, ROBUST DESIGN AND FLEXIBLE CONTROL INTRODUCING THE MAXFAN COMPAC THE NEW MAXFAN COMPAC DESIGNED FOR THE KITCHEN CANOPY MARKET
Square Duct Fans - ESTOC TARGE Range. Estoc Targe Features. Electrical Supply. Sizes 355, 400, 450, 500, 560 and 630.
Square Duct Fans - ESTOC TARGE Range Features Sizes from 55 to 6 mm diameter Air flow 21, m /h (5.8 m /s) Static pressures up to 145 Pa Maximum temperature up to 11 C Controllable external rotor motors
CNA-CNB CNA-CNB CENTRIFUGAL FANS STANDARD TEMPERATURES AND EX
NA-NB NA-NB ENTRIFUGAL FANS STANDARD TEMPERATURES AND EX PRODUT FATS PRODUT The centrifugal fans type NA and NB are robust and versatile fans of the single-inlet type with backward-curved blades. APPLIATION
Powerful centrifugal fans for universal use: The product ranges TEM and REM
Powerful centrifugal fans for universal use: The product ranges TEM and REM The fan ranges TEM and REM offered by Nicotra Gebhardt do present a large fan programme of single inlet centrifugal fans which
CSXRT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJSXR: Ventilation units with a backward-curved impeller
CSXR CSXRT CJSXR CSXR: Belt-driven single inlet centrifugal fans with shaft outlet and backward-curved impeller CSXRT: Belt-driven single inlet centrifugal fans fitted with electric motors, a set of pulleys
CLOSE CONTROL UNITS WITH CHILLED WATER COIL
CLOSE CONTROL UNITS WITH CHILLED WATER COIL COOLING CAPACITY FROM 5 TO 154 kw 230 D 56 The range of chilled water close control units, series, is particularly indicated for use in technological centres,
CVM. EBARA PUMPS EUROPE S.p.A. MULTISTAGE CENTRIFUGAL PUMPS
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 kw) 203 PERFORMANCE CURVE A (FROM 0.75 kw UP TO 1.1 kw) 204 PERFORMANCE CURVE
VERSO-CF H-PM/IE5/2/2-F7-M5-HW/4R/2.6-X-R1-C5.1-X
Date: 08.06.2018 Price: 13121 EUR without VAT, W Vilnius Air handling unit model: VERSO-CF-30-2.6-H-PM/IE5/2/2-F7-M5-HW/4R/2.6-X-R1-C5.1-X TECHNICAL SPECIFICATION AHU size 30 Typology NRVU BVU of HRS other
NEW GENERATION SERIES
FEATURES The New Generation Series of axial roof units are fitted with adjustable pitch impellers enabling a wide performance range to be obtained from any one unit. Construction Galvanised steel base,
Square Duct Fans - ESTOC Range. Estoc Features. Electrical Supply. Product Code. Sizes 355, 400, 450, 500, 560, 630 and 710.
Square Duct Fans - ESTOC Range Features Sizes from 355 to 71 mm diameter Air flow 1,9 m 3 /h (5.2 m 3 /s) Static pressures up to 115 Pa Maximum temperature from +4 C to +7` C (depending on the model) Adjustable
The Industrial Choice. Model VJ Direct Drive MANUALLY ADJUSTABLE-AT-REST VANEAXIAL FANS. Direct Drive & Belt Driven Model VJ / VJBD
The Industrial Choice. Model VJ Direct Drive MANUALLY ADJUSTABLE-AT-REST VANEAXIAL FANS Direct Drive & Belt Driven Model VJ / VJBD CATALOG 476 June 2015 Vaneaxial Fans Model VJ / VJBD Type "J" The heart
Vent-Axia Sabre Sickle Roof Fans (VSR)
Vent-Axia Sabre Sickle Roof Fans (VSR) Features and Benefits High performance roof sickle fan Fully assembled cowl. Optional backdraught shutters and birdguard Moulded from recyclable polymeric material,
Sabre Sickle Fan Assisted Roof Cowls (VSR)
Sabre Sickle Fan Assisted Roof Cowls (VSR) Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance Fully assembled cowl, separate plate axial fan Optional backdraught