ProCash 2050xe Short installation manual
|
|
- Melissa Scott
- 6 years ago
- Views:
Transcription
1 Proash 00xe SPEFKTONS Physical Security This TM meets the following Security standards EN 090, UL090 and meets the attack test per UL 9-, S.-090, E 090. The safe door has a relocking feature. The controlling of safe door is by keys, combination lock with keys or optional electronic lock. larm Protection The UL - listed safe is equipped with a basic alarm sensor package. The package includes a safe cabinet door open switch. Optional seismic sensor. Power Requirements This TM meets the following EM standards EN 0 class, EN0, EN 00-, EN 00-, EN000--, EN000--, F FR, part subpart class, ES-00 (S 0. and SM- Standard NS class. The E symbol indicates that the product complies with the following EU directives. EM 9//E, 9//E, 9//E and 9//E and on Low voltage directive / security //E and 9//E. The TM requires a single-phase three-wire unswitched power outlet. Wiring to the TM must use a third-wired earth ground (conduit ground is not acceptable. The power supplied must be as specified below: 0-0 / 0-0 V (- 0 to + % at 0/0 Hz (+/- %, single phase Network structure Each TM must have a dedicated outlet/circuit. Power to the TM may be a branch or dedicated service and must be protected by a safety quick-disconnect device the break line voltage (such a circuit breaker at the electrical service panel. The quick disconnect device (or circuit breaker must turn off the line voltage at the amperage specified below. Fuse for the evice 0-0 V service, disconnect at 0 amps or Fuse 0-0- V service, disconnect at 0 amps egree of Protection (EN 09 Outdoors / ndoors Other electronic devices sharing power on a common branch circuit must conform to the same conducted interference standards as the TM. Power Usage for TM without UPS Rated urrent onsumption (Maximum Operation 0-0 V / 0-0 V. /. pparent Power onsumption (Maximum Operation 0-0 V / 0-0 V 0 / 0 V Real Output 0-0 V / 0-0 V 00 / 9 TU/h Power factor 0-0 V / 0-0 V 0.9 / 0. Protection lass Leakage urrent (Maximum 0-0 V / 0-0 V. /. m pparent Power onsumption open circuit Power Usage for TM with UPS Rated urrent onsumption (Maximum Operation 0-0 / 0-0 V pparent Power onsumption (Maximum Operation 0-0 / 0/0 V Real Output 0-0 V / 0-0 V Power factor Protection lass Leakage urrent (Maximum 0-0 V / 0-0 V Standby Power onsumption (no transaction Heating (without device Rated current consumption 0-0 V / 0-0 V pparent power consumption 0-0 V / 0-0 V ctive power 0-0 V / 0-0 V Finish Fascia painted standard WN Grey (option any NS or RL color or stainless steel Housing (Top over painted standard WN Grey (option any NS or RL color Safe painted standard Grey (option any NS or RL color Operating Environment (N EN 0(E Temperature, Safe location lass K (nside + to + ( to 9 F Relative Humidity (Non ondensing (nside to % Temperature, Fascia location (Outside with heating -0 to + 0 ( -0 to F Relative Humidity (Non ondensing (Outside to % Temperature, Limited range of Operation (inside, only a short time of Operation lass K + to +0 ( to 0 F Relative Humidity, Limited range of Operation (inside, only a short time of Operation lass K to % Transport lass K, Temperature - to + 0 (- to 0 F Transport lass K, Relative Humidity to 9 % Storage lass K, Temperature + to + 0 ( to 0 F Storage lass K, Relative Humidity to % Mechanical Environment (N EN 0(N E Operation Standalone Unit lass M Operation esktop Unit lass M Transport (n Original packing, on Vehicle, trailer, boat, train, and ir lass M Storage (n Original Packing lass M Environmental Protection (SN0 / / Environmental Protection (Recycling Noise emission in accordance with N EN 9 / Noise rating according to SO 99 Sound power level LWd Standby / Operation Work place specific Sound pressure level Lpm Standby / Operation. /. / 0 V / TU/h. /. m. /.9 00 / 0 V 9 / TU/h Proash 00xe / TN P / P 0. /. 0 / 0 V 9 / W 0.9 / 0.. /. m. /. / 0 V 9 / 0 W. /. m. /.9 00 / 0 V 00 / 0 W. /.0 d / d SPEFKTONS imensions and Weight of Unit without / rack Height Recommended nstallation Height Width epth epth with fascia frame (Wodden Support Table with Safe Weight Surface Load Foot print Operation and Maintenance rea (Front Load Operation and Maintenance rea (Rear Load Fan capacity Fore more etails regarding nstallation not covered in this document we refer to Reference nstallation Guide with order no.: GENERL SPEFKTONS Single able Run onstrains The following chart sitemizes the physical spacing requirements of the signal cable run with respect to order power and electrical equipment cable run. Type of electrical run Fluorescent, neon incandescent lighting fixture Unshielded power line or electrical equipment Unshielded power line or electrical equipment with signal cables enclosed in grounded conduit Power line in grounded conduit with signal cables in grounded conduit Single able nstallation onstrains Relative care is required when installing signal cables in conduits. Unlike power and lightening cables, signal cables have small conductors and light isolations and will not withstand as much strain in installation. The following chart summarizessome common conduit parameters. The sum of crosssectional areas of cables being installed in conduit should not exceed 0% of the area of the conduit. onduit size (inches / / / / nternal diameter (inches 0, 0,,09,,,0 rea square inches 00% For conduit runs. meters to 0. meters ( 0 to 00 feet, not more than % of conduit area should be used. Each 90 degree conduit bend may be estimated as equal to the friction of a 9. meters (0 foot length straight level conduit. f more than two 90 degree bends are used in conduit run, insert a pull box. Electro static discharge Static electricity charges are built up as a result of contact with certain floor covering and furniture. discharge of this build up can discomfort to people and possible interference with electronic devices. The following precautions should be taken whenever possible to reduce the chance of static discharge problems. void relative humidity values less than 0 %. Treat floor covering around electronic equipment with static reducing agents commercially available. UL 9 usiness UL 9 EN EN V 0, 0, 0,,,0, kg (0.99 lb.kn/m²(.lb/in² elow kv mm ( mm ( mm ( / 0, m² (.9 ft² 0 mm ( /.0 m² (. ft² 0m³/h(. ft³/h 0% 0, 0, 0, 0, 0,, 90 kg (9. lb 9.kN/m²(.lb/in² 0, m² (.9 ft² Power of electrical run etween - kv mm ( 0 mm ( mm ( mm (.0 m² (. ft² 0m³/h(. ft³/h % 0,099 0, 0, 0,9 0,9,09 Proash 00xe 00 mm ( mm (. 0 mm (. 90 kg (9. lb 9.kN/m²(.lb/in² 0, m² (.9 ft².0 m² (. ft² 0m³/h(. ft³/h bove kv mm ( 0 mm ( mm ( mm ( % 0,0 0, 0, 0, 0, 0, External cabling Please refer to the appropriate TM nstallation Guide for details for terminal cable access. Junction boxes, conduit, etc, are the responsibility of the customer. Local codes will dictate location and material to be used in electrical connections. Negativ pressure constraints To prevent cold weather operating problems due to induction of outside air and accompanying incursion of dirt, TM should be housed in a positive pressure environment, however negative (vacuum not exceeding (.0" HO is acceptable. Tall buildings are especially prone to having negative pressure values greater than (.0" special engineering will be required if this specified pressure is exceeded Proash 00xe Version 0.
2 Proash 00xe tunnel width mm -." View of evice without illuminated signage Minimum Service rea (." 0 (." 00 (." 0 (.9" m a x.0 ( m a x.. " max. 0 (max.." 00 (9.0" 90 (." 00 (9.0" (." * Standard lock: mm (.9" ustomer-specific lock: mm (." rawings is not drawn to scale. ll emissions in Milimeter and (nches. Weight in Kilo and (Pound. ll imensions, Weight and esign, is /* (."/.9"* 00 (." (." (." (.9" 0 (." (.9". (0." (." (.9" 00 (9.9" (." (.9" (." 0 (." dditional installation space required to reach the Operation and maintenance space dditional operation and maintenance Wall 0 (." 0 (.9" (.9" 0 (0." 0. (.9" (0." (." (." (." 90 (." 0 (." 0 (. " 9 (." 0 (.9" 9 (." (.9" (.9" (.9" (. " (. 9" Outside wall nside wall (device side x x 90 (." (." evice Wall Floor inside Floor outside Possible variants, and see down here Variant mm (0." > x < 9 mm (." Variant x = 0 (." Variant x > mm (." (." 0 (.9" 0 (." 9* (."* min. 0 (min.." min. X X (min..9" 0* (.09"* X x = x - (." Safe anking ivision Marketing Mounting set for safe Heinz-Nixdorf-Ring Tear-off sensor -0 Paderborn Screed 0 Phone +9(0/9 0 oncrete Fax +9(0/9 Mounting set for c ll Rights, including rights created by patent Top surface of finished floor 0 nstallation frame mm (." grant or registration of a utility model or design, nstallation rack 9 nstallation frame mm (0.9" elivery subject to availability, subject to min. 0 min. 0 (min.." (min.," 9 x = x - (." - (0.9" min. x = (." (min..9" 0* (.09"* min. * (0.9" (min..9"* x x Height-adjustable installation rack nstallation Frame mm (." (." (." (.9" (.0" (." (." (." (." 0 (." 00 (." (." 0 (.". (0." 0. (.0" 0 (." 0. (." max.0 (." (." (.0" 9 (." 99 (." (0.9" 9 (." (." (.9" 9 (.9" 9 (." (.9" 9 (." (9." 9 0 (.0". (." 0 (.". (0." 0. (." max.0 (." (.9" (." nstallation Frame mm (0.9" (.0" (." (." (0." (." 9 (.0" 0 (.09" (.9". (0." 9 (.9" 9 (." 9 (." 9 (.". (." 0 0 (." 0 (.9" 0. (." max.0 (." (.9" Proash 00xe Version 0.
3 Proash 00xe tunnel width mm -." View of evice with illuminated signage Minimum Service rea (9.0" (." 0 (.9" 0 (." 00 (." 0 (.9" m a x.0 ( m a x.. " max. 0 (max.." (." 90 (." 00 (9.0" (." * Standard lock: mm (.9" ustomer-specific lock: mm (." rawings is not drawn to scale. ll emissions in Milimeter and (nches. Weight in Kilo and (Pound. ll imensions, Weight and esign, is /* (."/.9"* 00 (." (.9" 0 (." (.9". (0." (." (." (.9" 00 (9.9" (." (." (.9" (." (." dditional installation space required to reach the Operation and maintenance space dditional operation and maintenance Wall 0 (." 0 (.9" (.9" 0 (0." 0. (.9" (0." (." (." (." 90 (." 0 (." 0 (. " 9 (." 0 (.9" 9 (." 0 (." (.9" (. 9 " (.9" (. " (. 9 " Outside wall nside wall (device side x x 90 (." (." evice Wall Floor inside Floor outside Possible variants, and see down here Variant mm (0." > x < 9 mm (." Variant x = 0 (." Variant x > mm (." (." 0 (.9" 0 (." 9* (."* min. 0 (min.." min. X X (min..9" 0* (.09"* X x = x - (." Safe anking ivision Marketing Mounting set for safe Heinz-Nixdorf-Ring Tear-off sensor -0 Paderborn Screed Phone +9(0/9 0 oncrete Fax +9(0/9 Mounting set for c ll Rights, including rights created by patent Top surface of finished floor 0 nstallation frame mm (." grant or registration of a utility model or design, nstallation rack 9 nstallation frame mm (0.9" elivery subject to availability, subject to min. 0 0 min. 0 (min.." (min.," 9 x = x - (." - (0.9" min. x = (." (min..9" 0* (.09"* min. * (0.9" (min..9"* x x Height-adjustable installation rack nstallation Frame mm (." nstallation Frame mm (0.9" (." (." (.9" (.0" (." (." (." (." 0 (." 00 (." (." 0 (.". (0." 0. (.0" 0 (." 0. (." max.0 (." (." (.0" 9 (." 99 (." (0.9" 9 (." (." (.9" 9 (.9" 9 (." (.9" 9 (." (9." 9 0 (.0". (." 0 (.". (0." 0. (." max.0 (." (.9" (." (.0" (." (." (0." (." 9 (.0" 0 (.09" (.9". (0." 9 (.9" 9 (." 9 (." 9 (.". (." 0 0 (." 0 (.9" 0. (." max.0 (." (.9" Proash 00xe Version 0.
4 Proash 00xe tunnel width mm -." View of evice with upper and lower illuminated signage Minimum Service rea (9.0" (." 0 (.9" 0 (." 00 (." 0 (.9" m a x.0 ( m a x.. " max. 0 (max.." (." 90 (." 00 (9.0" (." * Standard lock: mm (.9" ustomer-specific lock: mm (." rawings is not drawn to scale. ll emissions in Milimeter and (nches. Weight in Kilo and (Pound. ll imensions, Weight and esign, is /* (."/.9"* 00 (." (.9" 0 (." (.9". (0." (." (." 00 (9.9" (." (.9" (." 9 (.9" (.9" (." dditional installation space required to reach the Operation and maintenance space dditional operation and maintenance Wall 0 (." 0 (.9" (.9" 0 (0." 0. (.9" (0." (." (." (." 90 (." 0 (." 0 (. " 0 (.9" 9 (." (.9" 9 (." 0 (." (." (.9" (. 9" (. " (. 9" Outside wall nside wall (device side x x 90 (." (." evice Wall Floor inside Floor outside Possible variants, and see down here Variant mm (0." > x < 9 mm (." Variant x = 0 (." Variant x > mm (." (." 0 (.9" 0 (." 9* (."* min. 0 (min.." min. X X (min..9" 0* (.09"* X x = x - (." Safe anking ivision Marketing Mounting set for safe Heinz-Nixdorf-Ring Tear-off sensor -0 Paderborn Screed Phone +9(0/9 0 oncrete Fax +9(0/9 Mounting set for c ll Rights, including rights created by patent Top surface of finished floor 0 nstallation frame mm (." grant or registration of a utility model or design, nstallation rack 9 nstallation frame mm (0.9" elivery subject to availability, subject to min. 0 0 min. 0 (min.." (min.," 9 x = x - (." - (0.9" min. x = (." (min..9" 0* (.09"* min. * (0.9" (min..9"* x x Height-adjustable installation rack nstallation Frame mm (." nstallation Frame mm (0.9" (." (." (.9" (.0" (." (." (." (." 0 (." 00 (." (." 0 (.". (0." 0. (.0" 0 (." 0. (." max.0 (." (." (.0" 9 (." 99 (." (0.9" 9 (." (." (.9" 9 (.9" 9 (." (.9" 9 (." (9." 9 0 (.0". (." 0 (.". (0." 0. (." max.0 (." (.9" (." (.0" (." (." (0." (." 9 (.0" 0 (.09" (.9". (0." 9 (.9" 9 (." 9 (." 9 (.". (." 0 0 (." 0 (.9" 0. (." max.0 (." (.9" Proash 00xe Version 0.
5 Proash 00xe tunnel width 0 mm -." View of evice without illuminated signage Minimum Service rea (." 0 (." 00 (." 0 (.9" ma x. ( m a x.. 9 " max. 0 (max.." 00 (9.0" 90 (." 00 (9.0" (." /* (."/.9"* * Standard lock: mm (.9" ustomer-specific lock: mm (." rawings is not drawn to scale. ll emissions in Milimeter and (nches. Weight in Kilo and (Pound. ll imensions, Weight and esign, is 00 (." (.9" (." (.9". (0." (." (." (." (.9" 00 (9.9" 0 (." (.9" (." (." dditional installation space required to reach the Operation and maintenance space dditional operation and maintenance Wall 0 (." 0 (.9" (.9" 0 (0." 0. (.9" (0." (." (." (." 90 (." (." 0 (. " 0 (." 9 (." 0 (.9" (.9" (." (.9" 0 (. " Outside wall nside wall (device side x x 90 (." (." evice Wall Floor inside Floor outside Possible variants, and see down here Variant mm (0." > x < 9 mm (." Variant x = 0 (." Variant x > mm (." (." 0 (.9" 0 (." 9* (."* min. 0 (min.." min. X X (min..9" 0* (.09"* X x = x - (." Safe anking ivision Marketing Mounting set for safe Heinz-Nixdorf-Ring Tear-off sensor -0 Paderborn Screed Phone +9(0/9 0 oncrete Fax +9(0/9 Mounting set for c ll Rights, including rights created by patent Top surface of finished floor 0 nstallation frame mm (." grant or registration of a utility model or design, nstallation rack 9 nstallation frame mm (0.9" elivery subject to availability, subject to min. 0 0 min. 0 (min.." (min.," 9 x = x - (." - (0.9" min. x = (." (min..9" 0* (.09"* min. * (0.9" (min..9"* x x Height-adjustable installation rack nstallation Frame mm (." nstallation Frame mm (0.9" (." (." (.9" (.0" (." (." (." (." 0 (." 00 (." (." 0 (.". (0." 0. (.0" 0 (." 0. (." max. (.9" (." (.0" 9 (." 99 (." (0.9" 9 (." (." (.9" 9 (.9" 9 (." (.9" 9 (." (9." 9 0 (.0". (." 0 (.". (0." 0. (." max. (.9" (." (." (.0" (." (." (0." (." 9 (.0" 0 (.09" (.9". (0." 9 (.9" 9 (." 9 (." 9 (.". (." 0 0 (." 0 (.9" 0. (." max. (.9" (." Proash 00xe Version 0.
6 Proash 00xe tunnel width 0 mm -." View of evice with illuminated signage Minimum Service rea (9.0" (." (.9" 0 (." 00 (." 0 (.9" ma x. ( m a x.. 9 " max. 0 (max.." 0 (." 90 (." 00 (9.0" (." * Standard lock: mm (.9" ustomer-specific lock: mm (." rawings is not drawn to scale. ll emissions in Milimeter and (nches. Weight in Kilo and (Pound. ll imensions, Weight and esign, is /* (."/.9"* 00 (." (.9" (." (.9". (0." (." (." (." (.9" 00 (9.9" 0 (." (.9" (." 0 (." dditional installation space required to reach the Operation and maintenance space dditional operation and maintenance Wall 0 (." 0 (.9" (.9" 0 (0." 0. (.9" (0." (." (." (." 90 (." (." 0 (. " 9 (." 0 (.9" 9 (." 0 (." (.9" (." (.9 " (. 9 " 0 (. " Outside wall nside wall (device side x x 90 (." (." evice Wall Floor inside Floor outside Possible variants, and see down here Variant mm (0." > x < 9 mm (." Variant x = 0 (." Variant x > mm (." (." 0 (.9" 0 (." 9* (."* min. 0 (min.." min. X X (min..9" 0* (.09"* X x = x - (." Safe anking ivision Marketing Mounting set for safe Heinz-Nixdorf-Ring Tear-off sensor -0 Paderborn Screed Phone +9(0/9 0 oncrete Fax +9(0/9 Mounting set for c ll Rights, including rights created by patent Top surface of finished floor 0 nstallation frame mm (." grant or registration of a utility model or design, nstallation rack 9 nstallation frame mm (0.9" elivery subject to availability, subject to min. 0 0 min. 0 (min.." (min.," 9 x = x - (." - (0.9" min. x = (." (min..9" 0* (.09"* min. * (0.9" (min..9"* x x Height-adjustable installation rack nstallation Frame mm (." nstallation Frame mm (0.9" (." (." (.9" (.0" (." (." (." (." 0 (." 00 (." (." 0 (.". (0." 0. (.0" 0 (." 0. (." max. (.9" (." (.0" 9 (." 99 (." (0.9" 9 (." (." (.9" 9 (.9" 9 (." (.9" 9 (." (9." 9 0 (.0". (." 0 (.". (0." 0. (." max. (.9" (." (." (.0" (." (." (0." (." 9 (.0" 0 (.09" (.9". (0." 9 (.9" 9 (." 9 (." 9 (.". (." 0 0 (." 0 (.9" 0. (." max. (.9" (." Proash 00xe Version 0.
330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (30 HEIGHT NOTE SEE W ALL OPENING
L08 CALL -800--600 R DIEBOLD 0 FULL FUNCTION TERMINAL 40mm ( 6") CEN I SAFE - " OR " DISPLAY THROUGH THE WALL 0mm (") SAFE CONSULT WITH DIEBOLD INSTALLATION/SERVICE BRANCH FOR ADDITIONAL DETAILS AND INFORMATION.
More information203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (30 HEIGHT NOTE SEE W ALL OPENING
L0 CALL -800--600 R DIEBOLD 0 FULL FUNCTION THROUGH THE WALL 0mm ( VESTIBULE TERMINAL 40mm ( 6") CEN I SAFE - " OR " DISPLAY CONSULT WITH DIEBOLD INSTALLATION/SERVICE BRANCH FOR ADDITIONAL DETAILS AND
More informationOPTEVA 378 ENHANCED CASH RECYCLER TERMINAL FRONT LOAD LOBBY UNIT PLAN VIEW FRONT VIEW SIDE VIEW
L00 CALL -800--600 OPTEVA 8 ENHANCED CASH RECYCLER TERMINAL WITH mm ( ") UL SAFE 4 ( 6 ") 4 ( 6 ") CONSULT WITH DIEBOLD INSTALLATION/SERVICE BRANCH FOR ADDITIONAL DETAILS AND INFORMATION. PLEASE SEE PLANNING
More informationOPTEVA 923 IN LOBBY TELLER (ILT) PLAN mm (60") WIDE PLAN - STAND ALONE FRONT VIEW SIDE VIEW PAGE 1 OF 5 CALL NOTE:
OPTEVA 9 IN LOBBY TELLER (ILT) mm ( ") U.L. SAFE L4 CALL -8-999-6 CONSULT WITH DIEBOLD INSTALLATION/SERVICE BRANCH FOR ADDITIONAL DETAILS AND INFORMATION. PLEASE SEE PLANNING AND SITE PREPARATION GUIDE
More informationEDB-EPD, EGB-EPD and EJB-EPD (Equipment Protection Device) Circuit Breakers for Ground Fault Protection in NF Panelboards
-P, -P and J-P (quipment Protection evice) ircuit reakers for round ault Protection in N Panelboards Square -P, -P and J-P (quipment Protection evice) ircuit reakers are 1-pole thermal-magnetic circuit
More informationUL AND CODE COMPLIANCE
BAL500 FLUORESCENT EMERGENCY BALLAST 500 Lumens APPLICATION The BAL500 fluorescent emergency ballast works in conjunction with the AC ballast to convert new or existing fluorescent fixtures into emergency
More informationICOMIA Global Conformity Guideline for ISO/ABYC Standards and Canadian TP 1332 requirements. Guideline Number 3 Electrical
ICOMIA Global Conformity Guideline for ISO/ABYC Standards and Canadian TP 1332 requirements 1. PURPOSE sponsored by ABYC, BMF, ICOMIA, IMCI, and NMMA Author: Wieger de Wit Guideline Number 3 Electrical
More informationStart UP Guide. Symmetra LX Tower Rack-Mount. UPS Models 200 V, 4-8 kva 208/240 V, 4-8 kva 220/230/240 V, 4-8 kva
Start UP Guide Symmetra LX Tower Rack-Mount UPS Models 200 V, 4-8 kva 208/240 V, 4-8 kva 220/230/240 V, 4-8 kva 200 V, 4-16 kva 208/240 V, 4-16 kva 220/230/240 V, 4-16 kva Important Safety Messages SAVE
More informationBAL3000 BAL3000. Fluorescent Emergency Ballast Lumens. Specification Sheet. Emergency Ballast 1/19/2012. Project: Catalog#: Approved by:
1/19/2012 Fluorescent 1450-3000 Lumens Works in conjunction with an AC ballast to convert new or existing fluorescent fixtures into unobtrusive emergency lighting Maintains illumination of one or two lamps
More informationIndoor or Outdoor 2400 to 14,400 Volts 600 to 14,400 Kvac, 3 Phase, 60 Hz
c February, 1979 Supersedes DB 39-485, pages 1-4, dated November, 1973 Mailed to: E, D, C/2001, 2002/DB Benefits There are many capacitor applications in which factors such as physical location, personnel
More informationBAL1400 FLUORESCENT EMERGENCY BALLAST Specification-grade One or two-lamp emergency illumination
BAL1400 FLUORESCENT EMERGENCY BALLAST Specification-grade One or two-lamp emergency illumination APPLICATION The BAL1400 fluorescent emergency ballast works in conjunction with the AC ballast to convert
More informationBAL3000 FLUORESCENT EMERGENCY BALLAST Specification-grade: Up to 3500 lumens One or two-lamp emergency illumination
BAL3000 FLUORESCENT EMERGENCY BALLAST Specification-grade: Up to 3500 lumens One or two-lamp emergency illumination APPLICATION The BAL3000 fluorescent emergency ballast works in conjunction with an AC
More informationUnderstanding Electrical Terms
Understanding Electrical Terms Complimentary brochure from Understanding Electrical Terms In today s computer-intensive work environments, a critical issue is clean, reliable power. Powerlite is the industry
More informationSmart Battery Charger
BATTERY CHARGER Smart Battery Charger Model No. WSC-1215 (SB) WSC-1230 (SB) WSC-2408 WSC-2415 Manual Please read this manual carefully before installing and starting up this device. Figure 1 WSC-1215SB
More informationSoftstarter Intelligent Controllers
Softstarter Intelligent Controllers Series Modes of Operation (Standard) Soft Start 100% Percent Voltage Initial Torque Start Run This method has the most general application. The motor is raised from
More informationA. Motors shall be designed, built, and tested in accordance with the latest revision of the following standard documents.
PART 1: GENERAL 1.01 This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is to apply the
More informationExtensible Unit - VCE2a
ELECTRICAL INDUSTRIAL COMPANY (EICo) LUCY SWITCHGEAR Extensible Unit - VCE2a (Sabre) Electrical Industrial Company (EICo) Lucy Switchgear Extensible Unit VCE2a Front Panel: ELECTRICAL INDUSTRIAL COMPANY
More informationUniversity of Houston Master Construction Specifications Insert Project Name SECTION ELECTRONIC VARIABLE SPEED DRIVES PART 1 - GENERAL
SECTION 23 04 10 ELECTRONIC VARIABLE SPEED DRIVES PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and Section
More informationCopyright 2012 DelSolar Co. Ltd MQWRD installation manual-iec Ver. 1.4
INSTALLATION MANUAL IEC Version www.delsolarpv.com Copyright 2012 DelSolar Co. Ltd MQWRD-01-14--installation manual-iec Ver. 1.4 Content General information 1 Safety precaution for installing solar PV
More informationElectrical Installation
Electrical Installation Symmetra LX Tower UPS Models 200 V, 4-8 kva 208/240 V, 4-8 kva 220/230/240 V, 4-8 kva 200 V, 4-16 kva 208/240 V, 4-16 kva 220/230/240 V, 4-16 kva Important Safety Messages SAVE
More informationBALT5-800 LOW-PROFILE FLUORESCENT EMERGENCY BALLAST
BALT5-800 LOW-PROFILE FLUORESCENT EMERGENCY BALLAST APPLICATION The BALT5-800 low-profile fluorescent emergency ballast works in conjunction with the AC ballast to convert new or existing fluorescent fixtures
More informationMedium voltage products UniSec DY800 New 24 kv air-insulated medium voltage switchgear to e-distribuzione specifications
Medium voltage products UniSec Y800 New 24 kv air-insulated medium voltage switchgear to e-istribuzione specifications UniSec Y800 ubicles available Unit e-istribuzione specifications (Ed. 4) UniSec IS/1
More informationVD4 Installation and service instructions kv A ka
Medium voltage products VD4 Installation and service instructions 12... 36 kv - 630... 3150 A - 16... 50 ka Index For your safety! 1 I. Introduction 2 II. Programme for environmental protection 2 1. Packing
More informationModels beginning with MO, MK, 7B, 6S, 6F or 5B. Product Description. Technical Specifications. Installation Instructions.
Models beginning with MO, MK, 7B, 6S, 6F or 5B The Mini Meter Product Description Technical Specifications Installation Instructions February 28 th, 2013 1. Product Description...2 1.1 General Description...2
More informationTEMPORARY ELECTRIC WIRING FOR CARNIVALS, CONVENTIONS, EXHIBITIONS, FAIRS AND SIMILAR USES
INFORMATION BULLETIN / PUBLIC - ELECTRICAL CODE REFERENCE NO.: LAMC 93.0230 Effective: 3-24-69 DOCUMENT NO. P/EC 2002-006 Revised: 11-17-00 Previously Issued As: RGA #7-69 TEMPORARY ELECTRIC WIRING FOR
More informationKD1E Range Potential Indicators
KD1E Range Potential Indicators Operating Instructions 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Limited Warranty & Limitation
More informationNorth America Phase Converters & Electrical Supply
North America Phase Converters & Electrical Supply OPERATION AND INSTALLATION MANUAL ROTARY PHASE CONVERTERS (Models PL, UL & CP) 240 VOLTS WARNING: To reduce the risk of injury, the user must read and
More informationDisconnect Switch and Circuit Breaker Mechanism Specifications Bulletin Number 1494
Technical ata isconnect Switch and ircuit reaker Mechanism Specifications ulletin Number 1494 Topic Page 1494U isconnect Switch Specifications 2 1494, 1494F, 1494G, 1494R, 1494V isconnect Switch Specifications
More informationGP Dimming Panels 230 Volt (CE)
GAFIK Systems 30 Volt (CE) gp- 03.0.04 GP3/4 Mini Panels GP8-4 Standard-Size Panels provide power and dimming for up to 4 load circuits and control any light source, including full-conduction non-dim.
More informationIMPORTANT SAFEGUARDS
INSTRUCTION MANUAL NON-INTERRUPTIBLE AC INVERTER SYSTEM MODEL EAC FTM 350 FOR EMERGENCY LIGHTING POWER IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed,
More informationPowerAir Compressor Installation
PowerAir Compressor Installation Applies to Models: P21-115 Volts P22, P32-230 Volts P52, P72-230 Volts Equipment Alert Compressor system must be installed per local plumbing and electrical codes. Model
More informationINSTALLATION MANUAL.
INSTALLATION MANUAL D6M_BxA Series : D6M_B1A / D6M_B2A / D6M_B3A / D6M_B5A D6M_AxA Series : D6M_A1A / D6M_A2A / D6M_A3A / D6M_A5A D6P_BxA Series : D6P_B1A / D6P_B2A / D6P_B3A / D6P_B5A D6P_AxA Series :
More information1329I Integrated Drive/Motor CE Filter Option Kit
Instruction Sheet 1329I Integrated Drive/Motor CE Filter Option Kit CE filter options are designed to be used with the 1329I Integrated Drive/Motor. The main function of the CE filter is to reduce the
More informationw w w.apc.com Home Appliance & Lighting UPS HI800SQ Installation Guide and User s Manual
w w w.apc.com Home Appliance & ighting UPS HI800SQ Installation Guide and User s Manual 990-2391D Copyright 2009 American Power Conversion. All rights reserved. APC is a registered trademark of American
More informationGP Dimming Panels 230 Volt (CE)
30 Volt (CE).3.08 GP3/4 Mini Panels GP8-4 Standard-Size Panels provide power and dimming for up to 4 load circuits and control any light source, including full-conduction non-dim. Models available with:
More informationM-3025CB-AV Fuel Pump
SAVE THESE INSTRUCTIONS M-3025CB-AV Fuel Pump Owner s Manual TABLE OF CONTENTS General Information... 2 Safety Instructions... 2 Installation... 3 Operation... 4 Maintenance... 4 Repair... 5 Troubleshooting...
More information9. Non-Residential Services (Commercial, Industrial, and Agricultural)
Section 9 2016 Electric Service Requirements, 3rd Edition Section 9 Non-Residential Services Directory Page 9.1 General Requirements 68 9.2 Direct-Connect Metering, Single Installations 69 9.3 Direct-Connect
More informationGP Dimming Panels. GRAFIK Systems SPECIFICATION SUBMITTAL
rev gp-a 7.0.00 GP3/4 Mini Panels GP8-4 Standard-Size Panels DESCRIPTION Provide power and dimming for up to 44 load circuits. Control any light source, including full-conduction non-dim. Models available
More informationCapacitors. Individual & fixed bank. Individual & fixed capacitor banks. Low Voltage Network Quality
Individual & fixed capacitor banks Low Voltage L O W V O L T A G E N E T W O R K Q U A L I T Y Individual & fixed bank Capacitors Description High reliability Well proven features of ABB dry type power
More informationSineWave Guardian TM 380V 600V INSTALLATION GUIDE. Quick Reference. ❶ How to Install Pages 6 17 ❷ Startup/Troubleshooting Pages WARNING
SineWave Guardian TM 380V 600V INSTALLATION GUIDE FORM: SWG-IG-E REL. October 2018 REV. 003 2018 MTE Corporation High Voltage! Only a qualified electrician can carry out the electrical installation of
More informationLumencia. LLMPS SERIES Micro Power Systems. Multi-Unit Residential Lighting. Job Name: Type:
APPLICATIONS LLMPS Series inverter systems are designed to provide sinusoidal AC emergency power to incandescent, flourescent, or LED fixtures of between 20 and 55 watts. Surface, recessed or ceiling T-Grid
More informationMK Electric IP Solutions
MK Electric IP Solutions Masterseal Plus MK Shield IP56 MK Splashguard IP55 Thrives in the Toughest Conditions. MK Electric IP Solutions wiring devices ingress protected www.mkelectric.co.uk MK Electric
More informationSTL. Series. Emergency Lighting Inverter 3kW to 160kW Central System
STL Series Emergency Lighting Inverter 3kW to 160kW Central System STL Series Sine Wave APPLICATIONS: The STL Series Inverter will operate incandescent, fluorescent, HID and LED lamps. *Depending on the
More informationBoston Gear Ratiotrol DC Motor Speed Control
Boston Gear Ratiotrol DC Motor Speed Control P-3017-BG Doc. No. 60007 Installation and Operation DCX plus Series II Enclosed Models 1/12-1 HP a division of Altra Industrial Motion Contents l General Information
More informationIlluminator Series CR NEMA 3R
Illuminator Series CR NEMA 3R GUIDE SPECIFICATIONS And TECHNICAL DESCRIPTION For 3.0, 4.0, 5.0, 6.5, 8.0kVA / kw Series CR - Single Phase Uninterruptible Power System This description contains all the
More informationSelection Information Molded Case Circuit Breakers
Selection Information Molded ase ircuit reakers lass 500, 600, 800 PowerPact 150 H-rame PowerPact 250 J-rame Trip Version Trip Version ircuit reaker Type H H HJ HL HR J J JJ JL JR Number of 2, 3 2, 3 2,
More informationLP Dimming Panels. GRAFIK Systems
GAFIK Systems lp-1 12.8.03 are ideal for projects with many small loads. Each panel provides power and dimming for up to 32 dimming legs. Features Work directly with incandescent, magnetic low voltage,
More informationEMERGENCY ONE-LED TM SOLO TM NON MAINTAINED LED LAMP AND DRIVER KIT
Product description One-LED Solo TM is a non-maintained, self-contained LED emergency luminaire comprising an Omni-LED emergency LED driver, hinged rechargable battery and a flush-mount SELV lamp head.
More informationTECHNICAL SPECIFICATION FOR 11 KV AUTOMATIC CAPACITOR SWITCH
TECHNICAL SPECIFICATION FOR 11 KV AUTOMATIC CAPACITOR SWITCH MAHARASHTRA STATE ELECTRICITY DISTRIBUTION COMPANY LTD. PAGE 1 OF 7 TECHNICAL SPECIFICATION FOR 11 KV AUTOMATIC CAPACITOR SWITCH 1.0 SCOPE:
More informationCompact SE Overview. High-Performance Dimming. Ballast
Compact SE Overview CompactSE 01.10.10 For designs requiring the energy savings and aesthetic appeal of dimmed T4 compact fluorescent or T5 twin-tube lamps, Compact SE dimming ballasts are your solution.
More informationSafety and General Information
Safety and General Information Symmetra LX Tower Rack-Mount UPS Models 200 V, 4-8 kva 208/240 V, 4-8 kva 220/230/240 V, 4-8 kva 200 V, 4-16 kva 208/240 V, 4-16 kva 220/230/240 V, 4-16 kva Important Safety
More informationClassicSeries Compressor Installation
ClassicSeries Compressor Installation Applies to Models: CL21-115 Volts CL22, CL32, CL52-208- 230 Volts Equipment Alert Compressor system must be installed per local plumbing and electrical codes. Note:
More informationElectric Range installation manual
Electric Range installation manual This manual is made with 100% recycled paper. imagine the possibilities ENGLISH Thank you for purchasing this Samsung product. To receive more complete service, please
More informationOrder No. of the options EMC filter Class A
Ordering Data for Variant Dependent Options The options listed here (filters, chokes, brake resistors, gland plates, fuses and circuit breakers) are inverter specific. The inverter and the associated options
More informationDemand Switch NEFA20 Plus. Installation Guide. Please read this entire guide before beginning the installation!
Demand Switch NEFA20 Plus Installation Guide Please read this entire guide before beginning the installation! Supplied Parts Protective Covers DIN Mounting Rail NEFA20 Plus Mounting Rail Spacer Warning
More informationINSTRUCTION MANUAL. IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed, including the following:
IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed, including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS 1. CAUTION To prevent electrical
More informationDUAL 60V 20A POWER FLEX POWER SUPPLY INSTRUCTION MANUAL
72-7570 DUAL 60V 20A POWER FLEX POWER SUPPLY INSTRUCTION MANUAL Table of Contents Specification 1 Safety 3 EMC 4 Installation 5 Connections 5 Operation 6 Maintenance 8 Specification General specifications
More informationOPERATION INSTRUCTIONS
www.r-techwelding.co.uk Email: sales@r-techwelding.co.uk Tel: 01452 733933 Fax: 01452 733939 ProArc 175 INVERTER ARC WELDER OPERATION INSTRUCTIONS Version 2017-10 2 3 Thank you for selecting the R-Tech
More information530 Power. Grounding. Line voltage. Caution. A proper earth ground is required for GC operations.
Caution A proper earth ground is required for GC operations. To protect users, the metal instrument panels and cabinet are grounded through the three-conductor power line cord in accordance with International
More informationHGM501 Gen-set Controller USER MANUAL. Smartgen Technology
HGM501 Gen-set Controller USER MANUAL Smartgen Technology Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. OVERVIEW... 4 PERFORMANCE AND CHARACTERISTICS... 4 TECHNICAL DATA... 5 OPERATION... 6 4.1. BUTTON DESCRIPTION...
More informationHow to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa
oolant Valve Series S External pilot solenoid S ir operated S How to Order 0 0 Y 0 0 T Z q w e r t y u i o!0!!!!! q Series S00 S00 S00 w Valve type ormally closed ormally open e Seal material R FKM r Pressure
More informationDefender Mini Online Emergency Central Lighting Inverter (CLI) Technical Specifications
Defender Mini Online Emergency Central Lighting Inverter (CLI) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. The Defender Mini CLI specification describes a single phase, online, solid state Lighting
More informationUNIVERSAL LIGHT 15-24W. IP64 WARRANTY
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT 15-24W www.trulygreensolutions.com
More informationHD UNIT INSTALLATION & SERVICE BOOKLET 3-7
HD UNIT INSTALLATION & SERVICE BOOKLET 3-7 2 Heat exchanger Fan Mounting hole Speed control Air flow hole Technical information plate Power cable 230V Glycol inlet/outlet WARNING During the installation
More informationInstallation And Operation Instructions
Installation And Operation Instructions For MPS Series Micro-Inverter Power Sytems Lead Calcium Battery Models: MPS-32 and MPS-55 Nickel Cadmium Battery Models: MPS-20 and MPS-35 Surface (-S), Recessed
More information5. High voltage warning labels should be placed on all cabinet doors and terminal covers enclosing equipment operating at above 50 volts.
Village hydro specifications Electrical components E1. Labels and notices Requirement 1. All electrical components must carry labels describing their function. This applies particularly to switches and
More informationSECTION MOTOR CONTROL
SECTION 26 24 19 MOTOR CONTROL PART 1 - GENERAL 1.1 SECTION INCLUDES A. Manual motor starters B. Magnetic motor starters C. Combination magnetic motor starters D. Solid-state reduced voltage motor starters
More informationGeneral Installation Manual Mar 2009, Sanyo Electric Co., Ltd. All Rights Reserved 3/23/09
General Installation Manual General Installation Manual for SANYO HIT Photovoltaic Modules. Please read this manual completely before installation or use of SANYO modules. This manual applies to the following
More informationEcoSystem Multiple Control Input Ballasts
Eco Five Control Digital Dimming s Eco Multiple Control s 369454l 1 09.02.16 Digital electronic dimming ballasts maximize the benefits of a lighting management system. Eco s offer 100% to 10% dimming;
More informationCIVACON GROUND VERIFICATION RACK MONITOR SYSTEM and ASSOCIATED EQUIPMENT
GROUND VERIFICATION RACK MONITOR SYSTEM and ASSOCIATED EQUIPMENT INSTALLATION AND WIRING INSTRUCTIONS MANUAL 8030 MANUAL PART NUMBER JANUARY 2011. 4304 MATTOX RD. KANSAS CITY, MO 64150 TABLE OF CONTENTS
More informationInstallation Instructions
AQU244 & AQU128 Series Installation Instructions Installation Instructions AQU244 24vdc 5A Supervised Power Supply/Charger module AQU128 12vdc 10A Supervised Power Supply/Charger module Both Mounted in
More informationProduct Manual & Installation Guide Vertical Rack Mount 5.0 to 8.6 kw
Product Manual & Installation Guide Vertical Rack Mount 5.0 to 8.6 kw 30A 208V 20A 208V 3 Phase 30A 208V 3 Phase Important Information Specifications Installation & Operation Outline & Wiring Drawings
More informationBussmann series IEC cylindrical fuses
IE and ritish Standard fuses 5 ontents ussmann series IE cylindrical fuses Section page escription Fuses S Type P and fuses (N, S and PON) HR Form II lass fuses (GL) 3 HRI industrial ceramic body fuses
More informationINSTALLATION AND OPERATING INSTRUCTIONS OF THE INTERNATIONAL ISOBOX SERIES ISOLATION TRANSFORMERS.
INSTALLATION AND OPERATING INSTRUCTIONS OF THE INTERNATIONAL ISOBOX SERIES ISOLATION TRANSFORMERS. Before installing and/or using this product, please check for any visual damage of the enclosure, power
More informationPhase-Adaptive Power Module
Phase-Adaptive Power Module Provides dimming control for 1 zone of a full 16 A lighting load. May be used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, neon/cold cathode.
More informationILLUMINATOR LV. Emergency Lighting Inverter System 175VA through 750VA. Illuminator Series LV Single Phase
ILLUMINATOR LV Emergency Lighting Inverter System 175VA through 750VA Illuminator Series LV Single Phase ILLUMINATOR SERIES LV The Illuminator Series LV is a 175VA-750VA fast transfer Emergency Lighting
More information55185 EMERGENCY PACK FOR LED PANEL TECHNICAL DATA SHEET
FEATURES SPECIFICATIONS Power Consumption 10W Output Voltage 18~59Vdc MAX Input Current 500 ma Emergency Time 90 Minutes Battery Specification 14.4V/2000mAH Dimension (Inches) 12.6 (L) x 1.8 (W) x 1.3
More informationNEMA Contactors & Starters A200
March 007 NM ontactors & Starters 00 ontactors Non-reversing and Reversing -7 ontents escription Page ontactors Non-reversing and Reversing............ -7 Product escription Sizes 00 4............ -7 Product
More informationSloanLED THINLED. Constant Current. Installation Guide
SloanLED THINLED Constant Current Installation Guide Product covered in this guide: ThinLED CC: Part Number Description 701228-18-A Amber ThinLED Constant Current 701228-18-B Blue ThinLED Constant Current
More informationHPS Imperator Machine Tool Industrial Control Transformer
HPS Imperator Machine Tool Industrial ontrol Transformer The Perfect Solution The HPS Imperator line of machine tool industrial control transformers are specifically designed to meet the high inrush industrial
More informationPowerware 9390 Integrated Battery Cabinet (Models IBC-S and IBC-L) Installation Manual
Powerware 9390 Integrated Battery Cabinet (Models IBC-S and IBC-L) Installation Manual IMPORTNT SFETY INSTRUCTIONS SVE THESE INSTRUCTIONS This manual contains important instructions that you should follow
More informationSECTION MOTORS AND VARIABLE FREQUENCY DRIVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Related Sections: 1. Section 15050 - Basic Mechanical Requirements. 2. Section 15051 - Motors. 3. Section 15185 - Hydronic Pumps. 4. Section 15625 - Centrifugal
More informationQUEENSLAND URBAN UTILITIES
DOCUMENT NO : EQUIPMENT NO : PREPRED : CHECKED : PPROVED : SHEET NO : 1 of 6 GENERL 1 Battery Charger DCC Inverters 3 DCDC Converters 4 System Design Life (other than batteries) Years 5 Battery Design
More informationXenon Fiberoptic Lightsource
Xenon Fiberoptic Lightsource Operating Instructions for ASB-XE-175W Lightsource 2659A Pan American Frw N.E Albuquerque, New Mexico 87107 USA (English) Page 1 of 12 TABLE OF CONTENTS PAGE 1. INTRODUCTION
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Vertical Hollowshaft Electric Motors C O N T E N T S
Revised 04/14/2016 SPECIFICATIONS - DETAILED PROVISIONS Section 16151 - Vertical Hollowshaft Electric Motors C O N T E N T S PART 1 - GENERAL... 1 1.01 SCOPE... 1 1.02 SPECIFIC PROJECT REQUIREMENTS...
More informationSECTION MOTOR REQUIREMENTS for HVAC
PART 1 GENERAL 1.1 SECTION INCLUDES A. Single-phase electric motors B. Three-phase electric motors 1.2 REFERENCES SECTION 23 05 13 MOTOR REQUIREMENTS for HVAC A. ABMA 9 - Load Ratings and Fatigue Life
More informationElectronic Temperature Control & Bulb Well Assembly (AC)
Electronic Temperature ontrol & ulb Well ssembly () 0916 86816 This is a line voltage single-stage electronic temperature control with singlepole, double-throw relay output and LED indication. It is designed
More informationHigh Frequency SineWave Guardian TM
High Frequency SineWave Guardian TM 380V 480V INSTALLATION GUIDE FORM: SHF-IG-E REL. January 2018 REV. 002 2018 MTE Corporation High Voltage! Only a qualified electrician can carry out the electrical installation
More informationElectrical Equipment and Terminology
Youth Explore Trades Skills Description Understanding the language of the electrical trade and knowing what electrical equipment is named and its purpose are very important. Anyone who is exposed to a
More informationRescue Pac. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference
Please dispose of Packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationModel #: APS V DC or 120V AC input; 120V AC output (hardwired) Auto Transfer Switching option for battery backup / UPS operation
PowerVerter APS Inverter/Charger with Auto-Transfer Switching Model #: APS2012 12V DC or 120V AC input; 120V AC output (hardwired) 2000 watts continuous, 3000 watts OverPower and 4000 watts DoubleBoost
More informationINSTALLATION AND OPERATING INSTRUCTIONS OF THE INTERNATIONAL ISOBOX SERIES ISOLATION TRANSFORMERS.
INSTALLATION AND OPERATING INSTRUCTIONS OF THE INTERNATIONAL ISOBOX SERIES ISOLATION TRANSFORMERS. Before installing and/or using this product, please check for any visual damage of the enclosure, power
More informationSITESTAR ELECTRONICS CABINET DESCRIPTION
SITESTAR ELECTRONICS CABINET DESCRIPTION SiteTel Sweden AB Haukadalsgatan 8A, SE-164 40 Kista, Sweden www.northstarbattery.com Contents 1 INTRODUCTION... 4 1.1 TARGET GROUP... 4 1.2 DOCUMENTS... 4 1.3
More informationElectrical Wiring Practices
Chapter 2 Electrical Wiring Practices and Diagrams MElec-Ch2-1 Overview Safety Standards Wiring Considerations Wire Terminations Coaxial Cable Wiring Installations Wiring Diagrams MElec-Ch2-2 Safety Lethal
More information3000W POWER INVERTER. User Manual
3000W POWER INVERTER User Manual Posts AC outlets Digital display ON/OFF button Remote control connection port (remote control switch is not included) USB port Two set of heavy duty input cable P a g e
More informationEcoSystem Multiple Control Input Ballasts
Eco Multiple Control s Eco s 1 06.25.10 Digital electronic dimming ballasts maximize the benefi ts of a lighting management system. Eco s offer 100% to 10% dimming; ideal for use where saving energy, increasing
More informationG2.1 RETROFIT LED LIGHTING
INSTALLATION INSTRUCTIONS FOR CHEVRON CANOPY: G2.1 RETROFIT LED LIGHTING Please review site plans before proceeding. Contact LSI Graphic Solutions Plus Customer Service at 1-(800) 678-2001 for installation
More informationSPECIFICATION SHEET :FH6-DUAL-3000L. Project Type Model # Remarks
Project Type Model # Remarks Description: Firehorse Emergency Ballast for use with or without AC ballast designed to add emergency lighting when main AC power is interrupted for minimum of 90 minutes at
More informationIlluminator Series CM. GUIDE SPECIFICATIONS And TECHNICAL DESCRIPTION. 500W, 1000W, 1500W and 2000W Single-Phase Emergency Power System
Illuminator Series CM GUIDE SPECIFICATIONS And TECHNICAL DESCRIPTION 500W, 1000W, 1500W and 2000W Single-Phase Emergency Power System This description contains all the necessary functional and technical
More informationEcoSystemR Multiple Control Input Ballasts
EcoR Multiple Control s 369454h 1 09.15.14 Digital electronic dimming ballasts maximize the benefits of a lighting management system. EcoR s offer 100% to 10% dimming; ideal for use where saving energy,
More information