6 CFF Mounted E-Gun Assembly w/4" Z Axis Translator
|
|
|
- Jeffrey Richards
- 5 years ago
- Views:
Transcription
1 ITE QTY PRTS LIST PRT NUME DESCRIPTION See Table 6 CFF Mounted E-Gun ssy, OM 0638 ISION HISTORY DESCRIPTION DTE PPROVE dded vent holes in stalk. /3/ MC Gun Changed to have lumina Insulators. 7/7/ MC dded dash numbers and V,I,T data. 8/5/ MC dded -03 & /6/ MC Revised -04 and added -05 0/9/ MC 3 dded shipping instructions, note 6. // MC 4 dded -06, -07 and -08, revised notes. /5/ MC C Was reserved for -09, see // MC D Many design changes to address standoff. 4// MC D Refinements and production release. 7/7/ MC D Revised V,I,T data. /9/3 MC dded -. //3 MC 6 CFF, Non-Rotatable, Not Tapped Power oot Connector, See Note 6 ushing Support Stalk & E-Gun ssembly 4.0 Z Translator, Ø.5 ore Thru Label w/serial Number DRWN Q 8//00 95 viation Way, Suite 00 P: Watsonville, C F: PPROVED 6 CFF Mounted E-Gun ssembly w/4" Z xis Translator Material: - SCLE YN4 3/ SHEET OF 5
2 0638 "L Range", Cathode Face to Mounting Flange Face "L" TLE Dash # "L Range" "L" This view shows the identity marks on the CFF/Feedthru assembly for hook up. s shown the feedthrus are marked for the filament (F), cathode/heater (C/H), grid (G) and grid 3 (G3). feedthru without an identity is a spare and is not connected to anything internally. ll feedthrus and internal connections are isolated from the translator and stalk assembly. Scale: / DRWN Q 8//00 95 viation Way, Suite 00 P: Watsonville, C F: PPROVED 6 CFF Mounted E-Gun ssembly w/4" Z xis Translator SCLE YN4 3/ SHEET OF 5
3 0638 TLE Dash # Cathode Type Part # Cathode Condition Grid Mesh Transparency Status -0 Dispenser Common Non-Intercepting - - Obsolete -0 La Common Non-Intercepting - - Obsolete -03 Dispenser Isolated Non-Intercepting - - Obsolete -04 Dispenser Isolated Intercepting 30x30x % Obsolete -05 Dispenser Isolated Intercepting 50x50x % Obsolete -06 La Isolated Non-Intercepting - - Obsolete -07 La Isolated Intercepting 30x30x % Obsolete -08 La Isolated Intercepting 50x50x % Obsolete -09 Dispenser Isolated Intercepting 50x50x % Obsolete -0 La Isolated Intercepting & 66.4% Current - La Isolated Intercepting Notes: & 66.4% Current. ssembly is leak tight to x 0-9 cc/sec Helium.. Operating temperature is: Estimated operation: -0, K 9.5V, 300 C ( C).7V, 400 C 5.6V, 55 C 3. maximum heating rate of 500 /minute is advised. Cooling should be in good vacuum and unassisted by gasses or other cooling methods. 4. Gun is shipped with 4 sets of the power boot. 5. This assembly must only be shipped in the customer supplied fixture, under vacuum. The ceramic outer housing and bell should be wraped with a clean room quality cloth and secured to help prevent damage as the stalk is being inserted into the shipping fixture and to also help with vibrations during shipment. The gun with fixture is then placed in a customer supplied crate for shipment and sent only by air ride van. 6. The power boots are rated for a maximum 0KVDC, 30. If more than 30 is required an alternate hook up and insulation must be provided. Without the power boot the feedthrus are rated for 4KVDC, Each assembly must ship with a copy of FM5, Inspection Data Sheet and FM60, High Voltage Test. DRWN Q 8//00 95 viation Way, Suite 00 P: Watsonville, C F: PPROVED 6 CFF Mounted E-Gun ssembly w/4" Z xis Translator SCLE YN SHEET 3 OF 5
4 0638 Macor Insulator, Houses all HV Connections Insulator for all 4 Lead Extensions See Details elow Grid & 3 Connections Made Inside Tapered Shroud Grid & 3 Leads Connection to HV Leads Made Internally, No Exposed Leads.50 SECTION - SCLE / 4 E Vent Holes 8X.0 8X. For Insulators Thru Hole for are Wires DRWN Q 8//00 E 95 viation Way, Suite 00 P: Watsonville, C F: SECTION E-E SCLE : PPROVED SCLE 6 CFF Mounted E-Gun ssembly w/4" Z xis Translator YN4 / SHEET 4 OF 5
5 0638 La6 Cathode 3 Typ. 3X Pyrolitic Graphite Grid lumina Insulator Ta Extension Leads to Grid, RSW lumina Ø.35 Ø3.09 C Shims for Cathode Location djustment Insulator.8 Grid Locking Pin.00 Cathode to Grid Gap DETIL C SCLE 4 :.078 Grid to Grid 3 Gap.098 Grid to Grid Gap DRWN Q PPROVED 8//00 Ta Extension Leads to Grid 3, RSW DETIL SCLE : viation Way, Suite 00 P: Watsonville, C F: CFF Mounted E-Gun ssembly w/4" Z xis Translator SCLE YN SHEET 5 OF 5
REMOVABLE MOUNT INSTALLATION FOR TRUCK BODIES For truck bodies only, not for trailers. Recommended for use with Dump Beds. See Drawing F.
REMOVBLE MOUNT INSTLLTION FOR TRUCK BODIES For truck bodies only, not for trailers. Recommended for use with Dump Beds. See Drawing 102468F. IMPORTNT. Safe and reliable operation of Donkey mounting kits
SRX IVL LANDFILL PUMP BOTTOM LOADING
REV DESCRIPTION DTE PPROVED RELESE FOR PRODUCTION 5/9/008 SWells 6 7 6 6 9 0 0 8 8 7 5 5 5 8 9 8 5 ) THE MGNET ITEM 5 IS INSTLLED INTO THE PUMP HED NORTH POLE FIRST. 9 8 7 6 DRWN SWells 5/9/008 Q 75 West
MNPV6 REV A DISCO 4X FINAL ASSY
NOTES 1) ITEM 2,USR, MUST HVE TWO END SCREWS REMOVED, SO THT ITEM, WHITE INSULTORS, CN E INSTLLED. 2) UNIT SHIPS WITH THE FOLLWING ECH LCK TWO WIRE STRIN RELIEFS, P/N 9--1 ECH LCK STRIN RELIEF NUTS, P/N
SECTION A-A
40.08 D 8 6 5 4 3 2 1 WRNING: IF THERE RE NY DISCREPNCIES ETWEEN THE CD FILE ND THE DRWING, THE DRWING WILL TKE PRECEDENCE. IF IN DOUT, SK. D C 51.1 48 20.25 18 C 23.68 15.12 NOTE: DRWER UNIT NOT INCLUDED,
WARNING: IF THERE ARE ANY DISCREPANCIES BETWEEN THE CAD FILE AND THE DRAWING, THE DRAWING WILL TAKE PRECEDENCE. IF IN DOUBT, ASK.
28.48 DJUSTLE 5.64 19.78 DJUSTLE D 8 7 6 5 4 3 2 1 20.37 WRNING: IF THERE RE NY DISCREPNCIES ETWEEN THE CD FILE ND THE DRWING, THE DRWING WILL TKE PRECEDENCE. IF IN DOUT, SK. D 51.80 48.00 9.57 C C 18.00
Model 1001/1001HPS Drinking Fountain
INSTLLTION, OPERTION & MINTENNCE INSTRUCTIONS Kleppe Lane Sparks, NV 89-667 (77) 9-72 Fax (77) 9-72 E-mail: haws@hawsco.com website: www.hawsco.com Model 00/00HPS Drinking Fountain No. 20760(9) NOTE TO
Design and Testing of a High Voltage Feedthrough for Extending IEC Operations to 300 Kilovolts
Design and Testing of a High Voltage Feedthrough for Extending IEC Operations to 300 Kilovolts Aaron N. Fancher Matt K. Michalak, Gabriel E. Becerra*, Gerald L. Kulcinski University of Wisconsin Madison,
C400 (6 in.) GEAR OPERATED SQUEEZE-OFF TOOL FOR PE PIPE
1825 ECN1825 C400 (6 in.) GER OPERTED SQUEEZE-OFF TOOL FOR PE PIPE Squeezing Pipe Set the Gauge Plates (3) on each side of the tool to the specific pipe size and SDR value. (See Picture 3) Ensure the desired
110/170 Pump Manual. CONTENTS Introduction 1 Parts Diagram 2 Installation 3 Trouble Shooting 4
110/170 Pump Manual CONTENTS Introduction 1 Parts Diagram 2 Installation 3 Trouble Shooting 4 INTRODUCTION This manual deals exclusively with the 110/170 series Product Pumps. Included in this manual are
S-Series Brushless, Frameless Torque Motors
S-Series rushless, Frameless Torque Motors Slotless, brushless ring motors with high torque output and zero cogging Frameless design for easy integration into OEM machines Various winding options available
R E V I S I O N REV. DRAWN BY ECO No DESCRIPTION DATE APPROVED BILL OF MATERIALS
NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO E R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO E EQUIVLENT TO MT-007. TEXTURE ON ENCLOSURE WILL VRY FROM TIME TO TIME S THE TOOL WERS ND IT ECOMES
Lacquer Conversion Kit
Instructions Important Safety Instructions Read all warnings and instructions in this manual and in the sprayer operation manual. Save these instructions. Lacquer Conversion Kit 56 3933D EN ti870a Lacquer
SMARTBOX MOUNTING BRACKET INSTALLATION INSTRUCTIONS John Deere 1790 (24/20 ), 1770NT, and DB CCS Planters Ladder & Rear Row Mount
World Class Industries 3 E. Prairie Street Crystal Lake, IL 6001 Phone: -SMRTOX (opt. 1) -62-26 (opt. 1) Fax: 1-9-99 SMRTOX MOUNTING RCKET INSTLLTION INSTRUCTIONS John Deere 190 (2/20 ), 10NT, and D CCS
RESPA CF QUALITY CABIN ENVIRONMENTAL AIR UNIT FOR CARAVAN, CAMPER, RV
The following design concept is for a basic RESP F (vdc or vdc - please specify when ordering) External ir Filtration and ab Pressuriser Kit for a Recreational amper, aravan, RV. The System arrangement
BEECHCRAFT [PRESSURE GYRO SYSTEMS ONLY]
![BEECHCRAFT [PRESSURE GYRO SYSTEMS ONLY]](/thumbs/89/97844284.jpg "BEECHCRAFT [PRESSURE GYRO SYSTEMS ONLY]")
1 2 3 4 24 25 20 6 7 8 9 5 10 13 14 15 16 22 23 21 18 11 12 17 19 28 27 26 pplicability: BEECHCRFT [PRESSURE GYRO SYSTEMS ONLY] Drawing: FC-W304 36 [S/N E-716, E-732 & fter] Date: 06/01/05 [S/N CE-602
BATTERY DISCONNECT UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES [MM]
![BATTERY DISCONNECT UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES [MM]](/thumbs/83/88584280.jpg "BATTERY DISCONNECT UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES [MM]")
ISIONS DESCRIPTION DTE BY 366 PRODUCTION RELESE 8/2/02 BF 002 3698 LOWER INPUT IMPEDNCE LEVEL 9/19/02 BF 003 4688 DD CONFORML COTING 1/23/06 BF 004 48 DD HETSHRINK TO TERMINL POST //06 BF 5303 UPDTE I
Illustrated Parts Guide for Quantum II / III Source
Illustrated Parts Guide for Quantum II / III Source End Station, Pgs.-0 Source Assembly Pgs.- Flight Tube / MRS Assembly Pg. Plasma Flood Assembly Pg. Extraction Assembly Pg. PO Box Leander, TX USA -0
Drawing A Crankcase 041 AV SCS
Drawing A Crankcase 1 Drawing A Crankcase Reference Item number Qty Description 1 1110 020 2105 1 Crankcase 2-5, 9, 10, 12 2 9371 470 3120 2 Cylindrical pin 6x20 3 9048 216 1010 8 Pan head screw M5x18
DRINK,COOL DOG WATER FOUNTAIN
DRINK, COOL WTER FOUNTIN Exclusive patent-pending decorative and functional features that hydrate, cool and keep dogs safe Standard heavy duty type 304 stainless steel 10 sched. 10 main column High polished
Section B. P/N: OEM Extended Life Source (no vaporizer) for GSD Implanters
Section B P/N: 99420 OEM 1068990 Extended Life Source (no vaporizer) for GSD Implanters B 2-3 B-4 B-6 B-5 Key to Sections B-2 Exploded view, with part numbers, of arc chamber and related components. B-3
Part # Description Qty Inspected By Rack & Pinion Pump Kit Remote Reservoir Line Kit Shaft Kit
58-62 Corvette Power Rack & Pinion Kit Instructions # 8011530 Unisteer offers a limited warranty against all manufacturer defects of their kits and supplied parts. Unisteer will not honor any warranty
1 SGI 500XT INVERTER TRANSFORMER WITH OUTDOOR ENCLOSURE CONDUIT, FITTINGS AND CONDUCTORS AS REQUIRED
1. THIS DOCUMENT IS INTENDED TO ILLUSTRTE THE PPLICTION OF 600VC TRNSFORMER WITH OUTDOOR ENCLOSURE WITH SOLECTRI RENEWLES SGI 500XT INVERTER. EXMPLES OF THE FOLLOWING RE GIVEN: - INVERTER TO TRNSFORMER
AMAT VIISTA MEDIUM CURRENT Replacement Components and Assemblies
Copyright 2016 PLANSEE SE. All rights reserved. Mar 1, 2016 22_46896_VIISTAMC - AMAT VIISTA MEDIUM CURRENT - Replacement Components and Assemblies AMAT VIISTA MEDIUM CURRENT Plansee No. Description 10046875
220-UL PUMP PARTS PRICE LIST
ITEM 1 PUMP Pump Body 1 See Note 1 1 Pump Body with Flush 1 See Note 1 1 7 Drive Shaft (Replaces 103227) 1 108425 8 Short Shaft (Replaces 103228) 1 108426 9 10 220-UL PUMP PARTS PRICE LIST DESCRIPTION
ROBERT H. WAGER COMPANY. Installation, Operation and Maintenance Guide. Models 1500/1500-MC 1700/1750
ROERT H. WGER COMPNY Installation, Operation and Maintenance Guide Models 00/00-MC 00/0 MODELS 00/00-MC/00/0 Installation, Operation and Maintenance Guide Robert H. Wager Company, Inc. 0 Montroyal Road
SM-F100 CONNEX Spray Gun Plasma Spraying. Parts List PL EN 07
Plasma Spraying Parts List PL 40867 EN 07 Oerlikon Metco 6/2015 Oerlikon Metco Switzerland Rigackerstrasse 16 CH-5610 Wohlen +41 56 618 81 81 +41 56 618 81 00 www.oerlikon.com/metco Spare Parts Categories
3M Overhaul Service Kit
SERVICE INSTRUCTIONS FOR 3M 12,000 RPM 5 in. (127 mm) and 6 in. (150 mm) RANDOM ORBITAL SANDERS 3M Overhaul Service Kit The part number 20347, 3M Overhaul Service Kit, contains all the replacement parts
All Owners/Operators of Bell 222/222B Helicopters
Subsidiary of Textron, Inc. Feb 13, 2007 TO: ll Owners/Operators of Bell 222/222B Helicopters SUBJECT: REVISION TO TECHNICL BULLETIN 222-06-174, TIL ROTOR BLDES 222-016-001-139 ND TIL ROTOR YOKE SSEMBLY
Manifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
3M Overhaul Service Kit
SERVICE INSTRUCTIONS FOR 3M 12,000 RPM 3 in. (77 mm) RANDOM ORBITAL SANDERS 3M Overhaul Service Kit The part number 20346, 3M Overhaul Service Kit, contains all the replacement parts that naturally wear
Product Specification 21XXXE00 EQUALIZER AND 21XXXC00 CONVERTER FAMILY
ISIONS ECO DESCRIPTION DTE BY 001 5332 PRODUCTION RELESE 11/26/08 JT 5489 DD 21100C00 MODEL NUMBER CLRIFY EQULIZER S OUTPUT VOLTGE DURING NO-LOD CHG SLES/MRKTG PPROVL BLOCK TO PROD MNGER PPROVL BLOCK 10/15/09
PARTS LIST AND SERVICE MANUAL
CD40 SERIES PTO PARTS LIST AND SERVICE MANUAL HEAVY DUTY, CONSTANT DRIVE PTO FOR THE ALLISON WORLD TRANSMISSION CD40 SERIES CONSTANT DRIVE PTO EXPLODED VIEW CD40 COVER DETAIL (Backside) PTO ASSEMBLY ARRANGEMENTS
Maricopa Solar. Decommissioning Plan
Maricopa Solar Decommissioning Plan Table of Contents: 1. Introduction 2. Decommissioning the H2 System 3. Decommissioning the 48V System 4. Decommissioning the 575V System 5. Decommissioning the 12KV
1318/ V BATTERY SEPARATOR
ISIONS ECO DESCRIPTION DTE BY 001 4153 PRODUCTION RELESE 7/30/04 BF 002 5188 CHNGE TRQ FRM 60±10 TO 50±5 IN/LBS & DD e-mrk TO LBEL 7/16/08 BF 003 5355 DD TRNSIENT PROTECTION 1/16/09 JT 5369 REDUCE ESD
Best of luck to you in all of your Inventor and design pursuits,
This PDF contains 24 detailed drawings of miscellaneous parts, to be used for practice with utodesk Inventor (or any D CD package for that matter). Some of the parts are a bit more challenging than others,
HAND PUMP INSTALLATION INSTRUCTIONS - 11HA
HAND PUMP INSTALLATION INSTRUCTIONS - 11HA lengths of drop pipe and pump rod. Insert into well and continue to add drop pipe and pump rod of equal lengths allowing for a minimum of 2 feet between bottom
INSTRUCTION SHEET ALL WEATHER FUEL LINE KIT KIT CONTENTS SERIAL NUMBER RANGE PB-760LNH PB-760LNT PB-770H PB-770T.
91204 LL WETHER FUEL LINE KIT 91204 KIT CONTENTS 1 2 3 4 5 7 6 13 14 15 16 17 18 MODELS PB-760LNH PB-760LNT PB-770H PB-770T REQUIRED TOOLS T27 Torx Driver Flat Blade Screwdriver Isopropyl lcohol SERIL
Anodized Aluminum Manifolds
nodized luminum Manifolds These manifolds can t rust, they resist corrosion and cost less! Made from heavy-wall aluminum extrusions, tested to 120 psi. Standard manifolds have 1" or 1¹ ₂" process water
U2 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 PUMP 180-U2 Pump Body 1 See Note 1 1 180-U2 Pump Body with Flush 1 See Note 1 1 184-U2 Pump Body 1 See Note 1 1 184-U2 Pump Body with Flush 1 See Note 1 1 220-U2 Pump Body 1 See Note 1 1 220-U2
Design A61D TriAx Triple Offset High Performance Butterfly Valve
pril 2000 ulletin 51.6:61D Trix Design 61D Trix Triple Offset High Performance utterfly Valve Description The Design 61D Trix is a triple offset disk HPV designed for rugged isolation service, available
KTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment
C DEN HARTOG INDUSTRIES, INC.
26.01 IBFD20-SET 12460 LNYRD 10526 12" NON-VENTED LID 17.88 GLLON CLIBRTIONS TNK SSEMBLY HRDWRE BG 14358 SJ10031 X 16 SJ10011 X 16 SJ11095 X 32 50 44.04 12639 S.S. HOSE CLMP TO SECURE CUSTOMER SUPPLIED
Fuel Tank Fitment Instructions Tusk/Rally Raid Products/Seat Concepts kit Husqvarna 701 Enduro
Fuel Tank Fitment Instructions Tusk/Rally Raid Products/Seat Concepts kit Husqvarna 701 Enduro Part #1849120001, 1849120002, 1849110001, 1849110002 Thank you for purchasing the Tusk/Rally Raid Products
Model AT Linear Anode System
Model T Linear node System Typical pplications: Underground and aboveground storage tanks, buried pipelines, elevator shafts, marine structures Featuring: Design flexibility - modular design permits multitude
Muncie Power Products, Inc.
EXTENDED SHAFT SERIES PARTS LIST AND SERVICE MANUAL CD10 SERIES EXTENDED SHAFT SERVICE PARTS LIST 1 1 11 1 6 8 9 10 CD10 LEFT SIDE ALLISON 000 ITEM QTY DESCRIPTION 9TA96A SAE-B 9TA97A DIN 6 9TA98A SAE-BB
MODEL 249/269/279 ELECTRON BEAM SOURCE
MODEL 249/269/279 ELECTRON BEAM SOURCE INSTRUCTION MANUAL Copyright TELEMARK, 1990-2018 All rights reserved February 2018 telemark.com Brand and product names are trademarks or registered trademarks of
Porsche 928 with 16v LH-Jetronic Fuel System
Porsche 928 with 16v LH-Jetronic Fuel System Toll-Free Tech Hot Line: 877-FOR-928M 877-367-9286 Please do not copy this manual and give copies to your friends. Our ability to bring you this supercharger
Hydraulic Installation Tooling (HK1173) Alcoa Fastening Systems & Rings. Nose Assembly. Installation Tool. Hose Kit.
Tool Set-up Nose ssembly Figure 3 Installation Tool Hose Kit Powerig Tool shown with electric trigger. General arrangement of fastening system components 8 TEFLON Stick - 503237 TEFLON Sealant - 620012
TAKE-A-LABEL Power Dr. Nunica, MI Phone (616) Fax (616)
OPERTIONS MNUL MODEL TL-000C CONTINUOUS DUTY TMP- LBELER TKE--LBEL 900 Power Dr. Nunica, MI 9 Phone () -900 Fax () -90 http://www.take-a-label.com E-Mail: takealabel@msn.com 000C Tamp Labeler 000C System
Proudly built in the USA. Owner smanual TC-420 withdropsides Hoist, Sub-Frame, and Dump Body
Proudly built in the US Owner smanual TC-0 withdropsides Hoist, Sub-Frame, and Dump Body TruckCraft Corporation Chambersburg, P -00-- Copyright c 00 TruckCraft Corporation Rev. - - //0 I-0 TRUCKCRFT CORPORTION
TA 65. Spare parts list. Rammer. Valid from serial number. Rammer TA mm (11 in.)
TA 65 Spare parts list Rammer Rammer TA 65 280 mm (11 in.) Valid from serial number BGF000001 2015 Construction Tools EOOD No. 9800 1719 01 2015-04-01 Original instructions TA 65 Spare parts list General
INSTALLATION GUIDE. 3 Dualsport suspension. ram truck 2500/3500. AEV30243AA Last Updated: 04/10/15
3 Dualsport suspension AEV30243AA Last Updated: 04/10/15 ram truck 2500/3500 INSTALLATION GUIDE PLEASE READ BEFORE YOU START TO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND READING THESE INSTRUCTIONS
METERING VALVE 2" STEM GUIDED
2" STEM GUIDED All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been made to ensure their accuracy, they are not to be construed
Illustrated Parts Guide for Quantum I Source
Illustrated Parts Guide for Quantum I Source End Station Pg.- Plasma Flood Assembly Pg. Source Assembly, Pg.- Flight Tube / MRS Assembly Pg. Extraction Assembly Pg. PO Box Leander, TX USA -0 00--99 sales@glemco.com
Product Specification 120XXE00 EQUALIZER AND 120XXC00 CONVERTER, 12V TO 24V FAMILY
ECO DESCRIPTION DTE BY 001 4265 PRODUCTION RELESE 10/18/04 BF 5070 REFORMT BLOCK REFINE LBEL DET ON LST TWO PGES 3/6/08 BF Product Specification 120XXE00 EQULIZER ND 120XXC00 CONVERTER, TO 24V FMILY 12040E00
L Frame - Assembly Guidelines
GE Energy Connections L Frame - ssembly Guidelines Product User ssembly Instructions Manual Table of Contents Introduction... 3 Index... 4 Section 1. L Frame Outline & Interface Dimensions...4 Outline
AGILENT VACUUM VALVES
GILENT VCUUM VLVES 2-3 gilent Vacuum Valve Solutions 4-23 gilent High Performance Valves 24-27 Stainless Steel Tube Valves 28-29 Electromagnetic Block Valves 30 Variable Leak Valves GILENT VCUUM VLVE SOLUTIONS
REASON: Provide the necessary instructions to replace the subject crushable bumper assembly.
X TRANSLATION OF BOLLETTINO TECNICO The technical content of this document is approved under the authority of DOA nr. EASA.21J.005. N 109K-43 DATE September 21, 2005 REV. xx xx Compliance with this bulletin
0 /28 Standard /-24 NEW XL-TILT STANDARD RANGE 112/350. Min 49. TELESCOPIC 70/80 mm. Min 422 STANDARD RANGE STANDARD RANGE 262/
2 28 144 28 132 2 507 144 400 2 775 135 0 12 0 /28 Standard 36 - +12 /-24 NEW XL-TILT 24 24 12 2/350 STNDRD RNGE Min 49 142 0 TELESCOPIC /80 mm 132 0 490 103 TELESCOPIC STROKE 50/100 45 95 81 65 262/600
AGILENT VACUUM VALVEs
GILENT VCUUM valves 2-3 gilent Vacuum Valve Solutions 4-17 gilent High Performance Valves 18-21 Stainless Steel Tube Valves 22-23 Electromagnetic Block Valves 24 Variable Leak Valves gilent Vacuum Valve
IRS-151 INSTALLATION INSTRUCTIONS `55-57 CHEVY INDEPENDENT REAR SUSPENSION
IRS-151 INSTALLATION INSTRUCTIONS `55-57 CHEVY INDEPENDENT REAR SUSPENSION Please read these instructions completely before starting your installation. Remember the basic rule for a successful installation:
Oil Cooler AKZ328-D142 PL
Oil Cooler PL-1009-15 1 2 Parts Parts Name Drwg. Parts Model & Specifi cation A1 A 1250093 SWING COMPRESSOR 1YC23HXD 1 M2C A2 0401393 RUBBER BUSH/ LEAD WIRE W443132-2 1 A4 390204 NUT WITH WASHER R4911377-1
INSTRUCTIONS-PARTS LIST. Kit, Swivel Wheel. Line Lazer 3500, Model , Series A. Old Caster Wheel Removal. Rev. D
INSTRUCTIONS-PRTS LIST This manual contains important warnings and information. RED ND KEEP FOR REFERENCE. 308943 Rev. D INSTRUCTIONS Kit, Swivel Wheel Line Lazer 3500, 5000 Model 241105, Series Old Caster
00083FAB-DC DRAWN BY DATE CHK SCALE SIZE
D0D/6 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. 0 5/4/8 SPLIT SIDE PNEL JGC TOP CP CURVED PERFORTED SINGLE HINGE DOOR SPLIT SIDE PNEL
14 and Larger Wafer and Lug Style Dual Disc Check Valve. Operation, Maintenance and Installation Manual
Manual No. DDCV-OM2-2 14 and Larger Wafer and Lug Style Dual Disc Check Valve Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1 INSTALLATION...
Parts Lists UII Pump Parts
Parts Lists Parts Lists Waukesha Cherry-Burrell 006-04-05-08-UII Pump Parts Page 48 95-0305 September 009 006-04-05-08-UII Pump Parts PART NOTES 006-U Pump Body See Note 006-U Pump Body with Flush See
LT Spare parts list. Rammer. Valid from serial number. LT mm, (9 in.) 2014 Construction Tools EOOD No a
LT 5005 Spare parts list Rammer LT 5005 150 mm, (6 in.) LT 5005 230 mm, (9 in.) Valid from serial number BGF000001 BGF000001 2014 Construction Tools EOOD No. 9800 1626 01a 2014-08-04 LT 5005 Spare parts
VIS Standard and Wheel Motors 45 Series Parts and Repair Information -005
VIS Standard and Wheel Motors Parts and Repair Information -005 VIS Standard & Wheel Motors - Table of Contents Table of Contents Exploded View...2 Parts List for Standard and Wheel Motor...3 Disassembly,
MODEL 272/259 ELECTRON BEAM SOURCE
MODEL 272/259 ELECTRON BEAM SOURCE INSTRUCTION MANUAL Copyright TELEMARK, 1990-2018 All rights reserved February 2018 telemark.com Brand and product names are trademarks or registered trademarks of their
GateKeeper Aluminum Gate Valves
GateKeeper Aluminum Gate Valves 250 mm Air-Operated 100 mm Air-Operated 63 mm Air-Operated The GateKeeper Series Aluminum Gate Valves are economical, reliable vacuum shut-off devices designed and manufactured
AEV30243AJ Last Updated: 11/14/17. 3 Dualsport front suspension ram truck 2500/3500 INSTALLATION GUIDE
AEV30243AJ Last Updated: 11/14/17 3 Dualsport front suspension ram truck 2500/3500 INSTALLATION GUIDE PLEASE READ BEFORE YOU START TO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND READING THESE INSTRUCTIONS
Installation Instruction
CIVCON MNIFOLD INSTLLTION MNUL REVISION 5/9/05 PETROLEUM MNIFOLD for TNK TRUCKS Installation Instruction Unit of Knappco, Inc. Phone: 86-74-6600 Fax: 86-74-06 CIVCON MNIFOLD INSTLLTION MNUL REVISION 5/9/05
2002 F-Super Duty /Excursion Workshop Manual
Page 1 of 5 SECTION 205-02D: Rear Drive Axle/Differential Ford 10.50-Inch Ring Gear 2002 F-Super Duty 250-550/Excursion Workshop Manual DIAGNOSIS AND TESTING Procedure revision date: 02/02/2005 Rear Drive
U1 PUMP PARTS PRICE LIST
006-014 - 015-018 - 024-U1 PUMP PARTS PRICE LIST ITEM 1 7 8 9 DESCRIPTION QTY. PER PART PUMP 006-U1 Pump Body 1 See Note 1 1 006-U1 Pump Body with Flush 1 See Note 1 1 015-U1 Pump Body 1 See Note 1 1 015-U1
PITNEY BOWES Sure-Feed Engineering 900 ECO-EI. Economy Envelope Inserter FEEDER (REPLACE-A-STATION SERIES) Parts Manual. 900-ECO-EI_PARTS_rev0 1
900 ECO-EI Economy Envelope Inserter FEEDER (REPLACE-A-STATION SERIES) Parts Manual 900-ECO-EI_PARTS_rev0 1 VERSION HISTORY The table below summarizes the history of this document as it is published onto
58-62 Corvette Manual Rack & Pinion Kit Instructions #
58-62 Corvette Manual Rack & Pinion Kit Instructions # 8001550 Unisteer offers a limited warranty against all manufacturer defects of their kits and supplied parts. Unisteer will not honor any warranty
PRODUCT SPECIFICATION C00 Converter. 48/36V to 12V, 20 Amps w/switched Output
ISIONS DESCRIPTION DTE BY 001 3826 PRODUCTION RELESE 8/21/03 BF 002 4650 DD 6 PIN MTING CONNECTOR PN S 10/12/05 BF 003 4969 GENERL DOCUMENT MODIFICTIONS 6/29/0 GF 5065 ELECTRICL CHRCTERISTICS CHNGES 11/1/0
Maintenance Instructions
General Note These instructions contain information common to more than one model of Bevel Gear Drive. To simplify reading, similar models have been grouped as follows: GROUP 1 Models 11, 0, 1,, (illustrated),,
Mounting Instructions Welded Coupling Mounting Instructions Welded Coupling
Mounting Instructions Welded Coupling Rev.08 (2014.06) OL Page 1 of 11 Table of contents I. STRUCTURE OF THE MANUAL / CLARIFICATION... 3 II. SAFETY AND HEALTH CONCERNS... 4 1 INTRODUCTION... 5 2 GENERAL
UII Pump Parts
Parts Lists 030-034-040-UII Pump Parts Waukesha Cherry-Burrell. Page 54 95-03015 September 2009 030-034-040-UII Pump Parts 1 7 8 9 10 : 1. 2. 12. 12A. 13. PART 030-U2 Pump Body 1 See Note 1 1 030-U2 Pump
BF Series Wafer/Lug Butterfly Valves
BF Series Wafer/Lug Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 moreinfo@henrypratt.com
ADAPTER GEAR ASSEMBLIES
ADAPTER GEAR ASSEMBLIES PARTS LIST AND SERVICE MANUAL Adapter Gear Assemblies are normally used to reverse rotation of the PTO output shaft and to clear mounting obstructions. Standard adapters will move
Code 0 Description Pic Link # Used Diameter Thread Pitch Length Washer 1 Washer2 Nut size Class Notes F Alternator bracket mounting bolts
Code 0 Description Pic Link # Used Diameter Thread Pitch Length Washer 1 Washer2 Nut size Class Notes 1 15 1 2F Alternator bracket mounting bolts (Engine Lift Hook) 3 10 1.25 30 split washer flat 4 14mm
INTERCONNECT/CONTROLLER
ISIONS DESCRIPTION DTE BY 001 3875 PRODUCTION RELESE 6/19/03 BF 002 3949 DD TERMINL LBEL TO PRT 11/19/03 BF 003 4783 DD DIMENSION TOLERNCES 6/15/06 BF 004 4787 DD HETSHRINK TO TERMINL POST 7/7/06 BF 005
INSTRUCTION MANUAL. for BUTTERFLY VALVES
STD-BFV-MGA Revision 0 11/21/03 INSTRUCTION MANUAL for BUTTERFLY VALVES Flowserve U.S. Inc Flow Control Division 1900 South Saunders Street P.O. Box 1961 Raleigh, NC 27603 Phone: (919) 832-0525 FAX: (919)
MODEL 246/266/276/296 ELECTRON BEAM SOURCE
MODEL 246/266/276/296 ELECTRON BEAM SOURCE INSTRUCTION MANUAL Copyright TELEMARK, 1990-2018 All rights reserved February 2018 telemark.com Brand and product names are trademarks or registered trademarks
Tubing Cutter for 1/16" Stainless Steel Tubing
Delivery Tubing and ccessories 311 P000257 Tubing Cutter for 1/16" Stainless Steel Tubing 58692-U Low-cost tool cuts 1/16" stainless steel tubing without obstructing the bore. Easily cut 1/16" OD stainless
Drawing A Crankcase, Cylinder
Drawing A Crankcase, Cylinder 1 Drawing A Crankcase, Cylinder Reference Item number Qty Description 1 4241 021 0300 1 Crankcase 2 9639 003 1230 2 Oil seal 12x22x7 3 9523 003 0000 2 Grooved ball bearing
O-540-F1B5 SERIES PARTS CATALOG WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES
INTRODUCTION This illustrated parts catalog contains a complete parts listing for the Lycoming O-540-F1B5 series wide cylinder flange crankcase model aircraft engines. Major assembly and sub-assembly parts
U1 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 060-064 - 130-134 - 133-U1 PUMP PARTS PRICE LIST DESCRIPTION QTY. PER PUMP 060-U1 Pump Body 1 See Note 1 1 060-U1 Pump Body with Flush 1 See Note 1 1 064-U1 Rectangular Flange Inlet Body 1
Isolation Valves. phone fax
Isolation Valves 2 TL OF ONTNTS Page 2 Isolation Valves General Information Page 3 Page 4 Page 5 Why choose an Isolation Valve and ommon pplications Isolation Valve Selection Guide 038T Series Isolation
Automatic Outboard Flushing System 1.5
utomatic Flushing System 1.5 Manual Shown: Version 1.5 B with optional remote switch kit and optional inlet hose kit. Reverso Pumps, Inc. www.reversopumps.com contact@reversopumps.com Ph: (954) 522-0882
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS FX4 ELITE REAR DISC CONVERSION KITS WITH INTERNAL PARKING BRAKE A110-14, A111-25, A111-29 for FORD 8" & 9" REAR ENDS Thank you for choosing STAINLESS STEEL BRAKES CORPORATION
I N S TA L L AT I O N
I N S TA L L AT I O N k i t 9 9 5 6 fits: 99-up v-star 1100 Part # Included 509944 1 Skull Air Cleaner Kit Including: 1 Skull Head Cover 1 Backing Plate 1 Filter Cage Black Powder Coated 1 Dual Velocity
U1 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 PUMP 030-U1 Pump Body 1 See Note 1 1 030-U1 Pump Body with Flush 1 See Note 1 1 034-U1 Rectangular Flange Inlet Body 1 See Note 1 1 034-U1 Rect. Flange Inlet Body with Flush 1 See Note 1 1
S»'94**gres* 6,=4.4.0 R\OF e.. S Z * 0 10.,5251, *S .//0/1111\\\\\\ VIWINCO INC. S-SERIES IMPACT AW/FIX STACKED 04/13/12
ISIONS DTE 07/27/5 ISED INSTLLTION DETILS RL THE PRODUCT SHOWIN HEREIN IS DESIGNED ND MNUFCTURED TO COMPLY WITH REQUIREME OF THE FLORID UILDING CODE 2 WOOD FRMING ND MSONRY OPENIING TO E DESIGNED l\id
INSTALLATION INSTRUCTIONS FOR PART APPLICATIONS Lexus ES Series
INSTLLTION INSTRUCTIONS FOR PRT 99-855 PPLICTIONS 997-00 Lexus ES Series 99-855 KIT FETURES DIN Head Unit Provision with Pocket ISO DIN Head Unit Provision with Pocket KIT COMPONENTS ( ) Radio Housing
BURNISHER ANTI-VIBRATION KIT
56383233 URNISHER NTI-VIRTION KIT Item Ref. No. Qty Description [ ] 56090160 1 Instruction Sheet 1 56001878 1 Scr-Hex 1/4-20 X 1.25 2# DELETED 3# 56109766 2 Screw utton Head 1/4-20 X.63 4 56002155 4 Scr-Hex
BELT DRIVE SYSTEM TROUBLESHOOTING CHART CAUSES CORRECTIVE ACTION ENGINE RUNS BUT PADDLES DO NOT TURN
ELT DRIVE SYSTEM TROULESHOOTING HRT USES ORRETIVE TION ENGINE RUNS UT PDDLES DO NOT TURN elt jumps off the drive pulleys. Inspect the belt for damage. Replace belt if needed. heck belt alignment. Idler
Spare parts list Trowel STG244 F TP
Spare parts list Trowel STG244 F TP Valid from serial number Valid to serial number BGF111601- www.cp.com STG244 F TP Spare parts list General information This spare parts list applies to the following: