MANUAL 2018 RETAIL SYSTEMS. Multi-Lane

Size: px

Start display at page:

Download "MANUAL 2018 RETAIL SYSTEMS. Multi-Lane"

Bryce Jackson
5 years ago
Views:

1 MANUAL 2018 RETAIL SYSTEMS Multi-Lane

2 Finish Galanised finishes chrome pearl * Suitable for merchandise supports and structural systems. Not suitable for large surfaces or for system parts in aluminium. * on request Anodised finishes for aluminium natural anodised aluminium Powder-coated finishes duro bright siler duro black anodised aluminium Only for aluminium system parts, such as profiles, uprights and frames. silk sterling siler duro All dimensions are gien in millimetres. Ito hto cto L A H = Length to order = Height to order = Colour to order = Length = Axis = Height Quick deliery program The items in the Manual, which appear with on the left-hand side near the part number, indicate the deliery time up to 8 working days ex works Weil am Rhein. All other items on request. Longer deliery times may occur in the eent of exceptionally strong demand. Air freight Items which are to be dispatched by air must not exceed a total length of 3 metres. Drawings of wooden and glass sheles Production drawings of sheles with the 6 digit part number are aailable for downloading on or can be receied on request. Assembly and s Special assembly and s exist for all retail product ranges by Vitra in order to guarantee the functions and safety. These instructions contain important information e.g. maximum weight loads, assembly dimensions or information on the correct assembly and use. The respectie assembly and s are included in the deliery of our systems. A general catalogue is also aailable on request for planning purposes. The assembly and s are also aailable for downloading on or can be receied on request. traffic white duro Duro powder-coated surfaces are suitable for all systems, as well as for merchandise supports subject to heay abrasion. Standard and special colours (powder-coated) bright siler mistral siler mat grey aluminum mistral patina dark (not opaque) dark bronce rusty iron pearl gold Suitable for all systems less so for merchandise supports subject to heay abrasion.

ISO 9001 / ISO 14001 All processes in our company are subject to a comprehensie management system which corresponds with the ISO 9001 quality standard and the ISO 14001 enironment standard.

3 ISO 9001 / ISO All processes in our company are subject to a comprehensie management system which corresponds with the ISO 9001 quality standard and the ISO enironment standard. The safety of electric products is certified by the CE mark. Copyright All retail products by Vitra and their names are protected by intellectual property rights. This protection is alid for the basic system along with the merchandise supports and accessories. In the eent of infringement, Vitra reseres the right to take legal steps. Our general conditions of deliery and sale are alid for all orders. We resere the right to make technical and formal alterations. Index Vitra always tries to respect the rights of third parties. Should it not be stated in indiidual cases, this is an oersight and will be corrected accordingly.

4 226 1/2018 (EN)

5 Multi-Lane layout examples 1/2018 (EN) 227

6 Aluminium profile The aluminium profile is used to: - support merchandise support frames - support ceiling tiles and ceiling panels - suspend display panels - support 230 V power rails The rail has an authorised load capacity of 150 kg/m with an axis interal of max mm lto Axis Connection sets Connection set for 2 ceiling rails L connection set for 2 ceiling rails T connection set for 3 ceiling rails X connection set for 4 ceiling rails Fixation set for 2 oerlapping ceiling rails 228 1/2018 (EN)

7 Support bracket Installed without tools, holds merchandise supports Examples of merchandise supports with and without electrification (24 V) x x 25 Support of power rails (230 V) The Multi-Lane layout can be tailored to each indiidual space. Due to the system s exceptional ersatility, we will help you design the Multi-Lane layout that best suits your needs. We will configure the components for the necessary structures. Please contact us. 1/2018 (EN) 229

8 Multi-Lane ceiling rail Coer profile for ceiling rail End cap for ceiling rail Dimensions lto lto Characteristics Aluminium profile can hold 230 V power rails and merchandise support frames. Max. weight load = 150 kg per linear metre Can be inserted into the bottom grooe of ceiling rail in place of a power rail. Is fixed to the end of a ceiling rail. Order number 1250 mm mm mm mm mm mm For lto: coer profile must be at least 2 mm shorter than the length of the corresponding ceiling rail Powder-coated steel; zinc-coated screws /2018 (EN)

Coupling for 2 ceiling rails L connector for 2 ceiling rails T connector for 3 ceiling rails X connector for 4 ceiling rails Is screwed into top grooe of 2

Is screwed to rail ends at intersection between 2 linear and 1 perpendicular ceiling rail.

9 Coupling for 2 ceiling rails L connector for 2 ceiling rails T connector for 3 ceiling rails X connector for 4 ceiling rails Is screwed into top grooe of 2 adjoining ceiling rails. Is screwed to rail ends at corner intersection between 2 perpendicular ceiling rails. Is screwed to rail ends at intersection between 2 linear and 1 perpendicular ceiling rail. Is screwed to rail ends at intersection between 4 ceiling rails Powder-coated steel; zinc-coated screws. Powder-coated steel; zinc-coated screws. Powder-coated steel; zinc-coated screws. Powder-coated steel; zinc-coated screws. 1/2018 (EN) 231

10 Coer profile for L, X and T connectors Fixation set for 2 oerlying ceiling rails suspension mount pendulum suspension M10 The coer set can be inserted in L, T and X connectors in place of a power rail. Is screwed to 2 oerlying ceiling rails. Is fixed in top grooe of ceiling rail. Enables fixation of linear ceiling rails. Min. distance from the ceiling to the lower edge of the profile 272 to max 372 mm. Adjustment range of 100 mm to compensate for height differences. Does not include mounting screws. These must be selected in accordance with the type of ceiling. Is fixed in top grooe of ceiling rail. Supports an M 10 threaded rod according to ceiling height (threaded rod is not included). Recommended for ceiling structures with L, T and X connectors and fastened oerlying ceiling rails. Does not include mounting screws. These must be selected in accordance with the type of ceiling Powder-coated steel; zinc-coated screws. Set of 2 pcs. Powder-coated steel; zinc-coated screws. The ceilung suspension mount must always be installed close to a connector and at interals of max. 150 cm. The ceiling pendulum suspension must always be mounted directly alongside the connector and at interals of max. 150 cm. At least 2 per ceiling rail. Threaded rod is not included in the deliery 232 1/2018 (EN)

Supports circular tube: Ø 20 mm or Ø 25 mm Supports square tube: 20 20 mm or 25 25 mm Max. weight load = 80 kg per support bracket For mounting on ceiling rail.

11 Support bracket with shaft for suspended merchandise supports Power rail mounting set Support profile for ceiling tile Support profile for ceiling tiles 12.5 mm lto lto Support bracket with shaft incl. safety element supports suspended merchandise supports. Is clipped into the ceiling rail and secured in place without tools. Supports circular tube: Ø 20 mm or Ø 25 mm Supports square tube: mm or mm Max. weight load = 80 kg per support bracket For mounting on ceiling rail. Exclusiely for EUTRAC power rail (5-conductor surface track or 7-conductor surface track incl. data bus). The aluminium profile is inserted sideways into the grooe of the ceiling rail. tiles are supported by angle trims. The aluminium profile is inserted sideways into the grooe of the ceiling rail. tiles are screwed to support profile from underneath. Does not include mounting screws for ceiling tiles. These must be selected in accordance with the type of tile raw Set of 12 pcs set of 100 pcs lto mm lto mm Three fixation points are required per linear metre of power rail (approx. eery 30 cm). 1/2018 (EN) 233

12 Support profile for lateral suspension of display panel Merchandise support frame without electrification Merchandise support frame 24 V electrified Merchandise support frame without electrification lto The aluminium profile is inserted sideways into the grooe of the ceiling rail. Supports different display panels. Steel frame with holes at 175 mm increments for supporting hanging rails and sheles. Steel frame with holes at 175 mm increments for supporting sheles, incl. hanging rail for garments. Steel frame with holes at 175 mm increments for supporting sheles, incl. hanging rail for garments. Does not include mounting screws for display panels. These must be selected in accordance with the type of panel. Square tube mm Max. weight load = 160 kg Square tube mm Nominal oltage = 24 V DC Nominal current max. 7 A Max. weight load = 160 kg Square tube mm Max. weight load = 160 kg lto mm mm mm mm mm mm mm Incl. 2 support bracket with safety element. Incl. 2 support bracket with safety element. Incl. 2 support bracket with safety element. Power rail adapter and conerter to be ordered separately /2018 (EN)

Merchandise support frame 24 V electrified Assembly tool Power supply unit with conerter and power rail adapter (24 V/60 W) Back bar for shelf without electrification 1600 25 x 25 Steel frame with

casing. Is inserted into bottom grooe of ceiling rail. Exclusiely for EUTRAC power rails (5-conductor surface track or 7-conductor surface track incl. data bus).

13 Merchandise support frame 24 V electrified Assembly tool Power supply unit with conerter and power rail adapter (24 V/60 W) Back bar for shelf without electrification x 25 Steel frame with integrated power rail on one side for powering sheles with LEDs. Holes in 175 mm increments Square tube mm Nominal oltage = 24 V DC Nominal current max. 7 A Max. weight load = 160 kg Incl. casing. Is inserted into bottom grooe of ceiling rail. Exclusiely for EUTRAC power rails (5-conductor surface track or 7-conductor surface track incl. data bus). operating instruction Is mounted between merchandise support frames. Max. weight load = 40 kg Glass shelf 1290 mm Glass shelf 640 mm Wooden shelf 1290 mm Wooden shelf 640 mm mm mm bright siler duro mm mm Incl. 2 support bracket with safety element. Power rail adapter and conerter to be ordered separately /2018 (EN) 235

14 Back bar with LED lighting for shelf electrified Hanging rail mm without electrification Scliss 100 x 25 x x R 20.5 Is mounted between merchandise support frames. Nominal oltage = 24 V DC - 6 W lamp for 650 mm axis - 12 W lamp for 1300 mm axis Colour temperature: 3000 K / 4000 K SDCM3 Colour rendering index: 92 Luminous flux: 1000 lm/m with opal diffusor Max. weight load = 40 kg Glass shelf 1290 mm Glass shelf 640 mm Wooden shelf 1290 mm Wooden shelf 640 mm Is mounted between merchandise support frames. Max. weight load = 40 kg Preents scratches on hanging rails and front arms in silk or stainless steel. To clip into coat hanger hook (Ø 3,4 3,8 mm). 650 mm mm Indicate colour temperature of 3000 K or 4000 K when placing order. 650 mm mm transparent Set of 100 pcs /2018 (EN)

MANUAL Invisible 6 P/L RETAIL SYSTEMS USA AND CANADA

MANUAL Invisible 6 P/L RETAIL SYSTEMS USA AND CANADA MANUAL 2018 RETAIL SYSTEMS USA AND CANADA Inisible 6 P/L Finish Galanised finishes Dimensions are generally shown in inches (approximate) and millimetres (exact). Ito hto L A H = Length to order = Height