Shape-it! Vektor 154 MAESTRO 1.0

Size: px

Start display at page:

Download "Shape-it! Vektor 154 MAESTRO 1.0"

Annabelle Hood
6 years ago
Views:

1 Shape-it! Vektor 154 MAESTRO 1.0

2 Vektor-1 Vektor-2 Spotlight fitted with a ED array source and optics featuring Shape-it!, a light shaping system. It is extremely versatile thanks to the dim-onboard knob and the focus that can be zoomed by adjusting the front spyglass. Passive heat dissipation Extruded aluminium casing ight management Excellent colour rendering thanks to a ED array Integrated electronics Electronics integrated in the discreet external compartment, installed parallel to the track Type of light control Version with dim-on-board knob ensuring an easy and functional light control Track 155

3 TRACK IGHTS VEKTOR Shape-it! h ux D h / m. D max 0, 0,62 0,93 1,24 1,55 ux max 30W 50W Vektor track spotlight presents Shape-It!: a light shaping system created by i-èd for the retail sector. Born out of the experience acquired in the field of museum lighting, Shape-It! allows for the creation of perfectly square-shaped projections ideal for original accent lighting squares. The system consists of a diaphragm with four AISI 304 steel louvers and an optics with manually adjustable focus for maximum precision. The diaphragm allows for the creation of the desired light spot with an even distribution of light on the entire surface; the adjustable focus clearly defines the edges of the light spot providing a perfect light projection. 156 MAESTRO 1.0

4 Code composition: type + colour + optic Vektor_1 Track luminaires V arrayed 30 W 840 ma type colour optic K 3034 lm W K 3244 lm Shaper Ø Vektor_1 DIMMABE Track luminaires V arrayed 30 W 840 ma type colour optic K 3034 lm W K 3244 lm Shaper Ø Vektor_2 Track luminaires V arrayed 50 W 1300 ma type colour optic K 40 lm W K 4611 lm Shaper Ø Vektor_2 DIMMABE Track luminaires V arrayed 50 W 1300 ma type Track colour optic K 40 lm W K 4611 lm Shaper Ø

5 TRACK IGHTS TRACK SYSTEM Track system Epoxy powder-coated extruded aluminium electrified track..5 x h 32.5 mm rectangular section with asymmetric profile for proper connection between modules. Four PVC insulated 4 mm² copper conductors (three phases and a max 16A neutral). Integrated 4mm² aluminium earthing conductor. 3 separate switching circuits available. Available in the recessed version with side retaining flaps for mounting on false ceilings. To be used with spotlights fitted with European standard adapters. Track System combines up to three separate circuits for a maximum of 16A. The three switch-on points can be combined thanks to the switch integrated in the adapter. 1 SWITCH-O 3 SWITCH-O 230V~ 16A, 3.7 kw 230V~ 16A, 3.7 kw max 16A max 16A The track mechanical load capacity is 5Kg or 1kg every 200mm if the maximum distance between two suspension lights is equal to 1 or 2mt respectively. 1 m m m Installation tips The recommended maximum distance between fixing supports is 1m. The diagrams below show the holes to be used for every module length available in order to comply with the safety distance above. Therefore if the module is 1m long, it will require only two fixing supports symmetrically placed at 250mm from the ends. If the modules chosen are 2 or 3m long then the number of supports required is three or four, respectively. A B 12 A mm A mm B mm C mm D mm C D 4 C MAESTRO 1.0

6 Track 159

7 TRACK SYSTEM 3-PHASE 1 m 2 m 3 m 36 32, ,5 1 m 2 m 3 m 32, Front-end power supply unit right sided Front-end power supply unit left sided Central power supply unit inear joint Flexible elbow connection: ength: 175 mm. Can also serve as power supply. I OUT shaped joint. Can also serve as power supply I - (left) I - R (right) 99, T-shaped joint. Can also serve as power supply. 1 OUT - (left) OUT - R (right) MAESTRO 1.0

1 1 52214 52217 X-shaped joint. 52414 52410 Stiffening bracket. 52215 182 52224 52227 Closing end cap.

52394 52397 Closing cover for joint unit (only on in-built track). 42330 Tool for bending conductors when tracks must be cut to measure. 3000 42364 Cable cover. H.

8 X-shaped joint Stiffening bracket Closing end cap Closing cover for power supply unit (only on in-built track) Fastening bracket for ceiling-mount Closing cover for joint unit (only on in-built track) Tool for bending conductors when tracks must be cut to measure Cable cover. H. 1,5 m H. 5 m H Suspended track with steel cable. Max 20 kg Ø Base for ceilingmounted spotlights, ceiling-mounted or recessed for false ceiling Ø130 Track 161

9 TRACK SYSTEM DAI 1 m 2 m 3 m 36 32, (left) R (right) Terminal power supply unit. Control module + cable and connection cover X- shaped power supply. Four control modules with cable and cover Power supply unit in the middle. Two control modules with cable and connection cover inear joint (left) R (right) shaped power supply. Two control modules with cable and connection cover Closing end cap Flexible elbow connection: ength: 175 mm. Can also serve as power supply. I - (left) I - R (right) T-shaped joint. Can also serve as power supply OUT - (left) OUT - R (right) MAESTRO 1.0

10 Stiffening bracket Fastening bracket for ceiling-mount Tool for bending conductors when tracks must be cut to measure. H. H. 1,5 m H. 5 m Suspended track with steel cable. Max 20 kg Track 163

6 Omnitrack 02_Omnit _15.indd 6 27/04/15 13:18

6 Omnitrack 02_Omnit _15.indd 6 27/04/15 13:18 6 Omnitrack F Omnitrack - 3 circuits 16 7 POWERED TRACKS L2 L3 L1 N 1200/2000/3000/00 Housing: Three-phase track for 3 separate electrical circuits. Extruded aluminium rectangular section, containing an