Aluminium. Tensile frame. Alu-snap frames & supports. Leaflet dispenser. Aluminium

Size: px

Start display at page:

Download "Aluminium. Tensile frame. Alu-snap frames & supports. Leaflet dispenser. Aluminium"

Kristian Brett Cameron
5 years ago
Views:

1 Tensile frame Alu-snap frames & supports Leaflet dispenser 119

2 TENSILE FRAME TENSILE FRAME NEW! Tensile frame Special lightweight frame made of anodised aluminium rods Ø 9 mm, round plastic corners grey with integrated suspension rings, quick and easy poster change by clips. Special sizes upon request. Packing unit: 1 pc. A SU 1 A SU 1 A SU 1 A SU 1 120

3 ALU- Alu-snap type frames & supports That's for sure: with OEK snap frames your promotion keeps going! The main features: Poster change within seconds: snap open, change poster, snap closed, ready. Poster thickness up to 1 mm. Profiles are made of high-quality, alu-anodised material. Completely mounted with a grey plastic rear and a non-reflective PVC cover you are getting a first class product with long life guarantee. You can chose between 3 different profile sizes and you are the one to determine the style: Profile 25: Availabe with mitred corners in sizes that range from A4 to A1 and 50 x 70 cm. Profile 32: Available with round chromium corners in sizes that range from A4 to A0, 50 x 70 cm and 70 x 100 cm. Version with mitred corners are available in sizes A1 and 70 x 100 cm. Profile 44: Available with mitred corners in size A0. Security profile: To prevent your valuable posters from theft, the security profile was developed. Opening of profiles will be possible with a special key only. Available with mitred corners and profile sizes 32 and 44. Special sizes will be possible in almost all dimensions and as from a quantity of 10 pcs. If you are looking for special coloured profiles we gladly will assist you. Also in bad weather our products won't leave you unprotected. The "weather-resistant" design of our snap frames is especially suitable for outdoor use by an utmost resistancy against influences of the weather. 121

4 ALU- Alu-snap type frame with mitred corners Alu-anodised profile with mitred corners, available in 3 profile sizes, grey plastic rear and non-reflective PVC cover. A4 (profile 25) SU 1 A3 (profile 25) SU 1 A2 (profile 25) SU 1 A1 (profile 25) SU 1 50 x 70 cm (profile 25) SU 1 A1 (profile 32) SU 1 70 x 100 cm (profile 32) SU 1 A0 (profile 44) SU 1 Alu-snap type frame with chromium round corners (profile 32) Alu-anodised profile with round chromium corners, grey plastic rear and nonreflective PVC cover. A SU 1 A SU 1 A SU 1 A SU 1 A SU 1 50 x 70 cm SU 1 70 x 100 cm SU 1 Alu-snap type frame with security profile Special profile made of alu-anodised material with mitred corners, opening the profiles will be possible with a special key only (please order separately), with grey plastic rear and non-reflective PVC cover. A1 (security profile 32) SU 1 A0 (security profile 44) SU 1 122

5 ALU- Key for security profile For alu-snap frames with security profile, change of poster will be possible with this key only, black SU 1 Alu-snap type frame for windows For special use on glass, in shopping windows and similar, without rear but with double adhesive, alu profiles with mitred corners, available in two profile sizes, with non-reflective PVC cover. A2 (profile 32) /F...SU 1 A1 (profile 32) /F...SU 1 A0 (profile 44) /F...SU 1 Counter frame Alu-anodised flat material to cover the double adhesive of the snap-frame glued to the window. A SU 1 A SU 1 A SU 1 123

..SU 1 Alu pavement support with mitred corners Square aluminium tube stand, version "A" foldable, with two alu-snap frames with mitred corners, grey plastic rear and non-reflective PVC cover.

6 ALU- Alu-snap type frame weather-resistant Alu-anodised profile with mitred corners, zinc metallic rear, non-reflective PVC cover with magnetic tape, suction pad for easy grip of the cover and drain-holes in the bottom profile. A1 (profile 32) /MRW...SU 1 Alu pavement support with mitred corners Square aluminium tube stand, version "A" foldable, with two alu-snap frames with mitred corners, grey plastic rear and non-reflective PVC cover. Total height: 85 cm (A2), 120 cm (A1), 160 cm (A0), 130 cm (70x100 cm) A2 (profile 32) SU 1 A1 (profile 32) SU 1 A0 (profile 44) SU 1 70 x 100 cm (profile 32) SU 1 Alu pavement support with chromium round corners Square aluminium tube stand, version "A" foldable, with two alu-snap frames with round chromium corners, grey plastic rear and non-reflective PVC cover. Top panel and crowner holder to be ordered separately. Total height: 120 cm A1 (Profil 32) SU 1 124

ALU- Alu pavement support weather-resistant A1 Square aluminium tube stand, version "A" foldable, with two alu-snap frames with mitred corners, zinc metallic rear, non-reflective PVC cover and

..SU 1 Crowner holder Metallic frame to insert promotion panels up to a max. thickness of 3 mm, to be used with pavement support "A" A2 57020-00...SU 1 A1 57010-00...SU 1 A0 57000-00.

7 ALU- Alu pavement support weather-resistant A1 Square aluminium tube stand, version "A" foldable, with two alu-snap frames with mitred corners, zinc metallic rear, non-reflective PVC cover and magnetic tape, with suction pad for easy grip of the cover and drain-holes in the bottom profile. Total height: 120 cm /MRW...SU 1 Crowner holder Metallic frame to insert promotion panels up to a max. thickness of 3 mm, to be used with pavement support "A" A SU 1 A SU 1 A SU 1 70 x 100 cm SU 1 Top panel for A1 Promotion panel made of polystyrene for crowner holder A1, promotional area approx. 63 x 22 cm, white SU 1 Leaflet dispenser To take leaflets A4, an accessory with high publicity value, to be used with supports "A", made of metal SU 1 125

PVC cover. Total height: 120 cm ( A1 and 70x100 cm) A1 53401-00.

..SU 1 T-support with leaflet dispenser, one-sided Square aluminium tube

corners, grey plastic rear, non-reflective cover and leaflet dispenser made

..SU 1 Poster-Vip T-support with black steel base stand and spring

8 ALU- T-support, profile 32 Square aluminium tube stand, version "T", with two alu-snap frames with mitred corners, grey plastic rear and nonreflective PVC cover. Total height: 120 cm ( A1 and 70x100 cm) A SU 1 70x100 cm SU 1 T-support with leaflet dispenser, one-sided Square aluminium tube stand, version "T", with one alu-snap frame A1 (profile 32) with mitred corners, grey plastic rear, non-reflective cover and leaflet dispenser made of metal, grey. Total height: 190 cm /P/1...SU 1 Poster-Vip T-support with black steel base stand and spring mechanism, with two alu-snap frames (profile 32) with mitred corners, grey plastic rear and non-reflective PVC cover. A SU 1 A SU 1 70x100 cm SU 1 126

9 ALU- Infostand A4 Alu-snap frame A4, available in profile size 25 with mitred corners or profile size 32 with round chromium corners, adjustable alu-tube cm with black locking screw and hinge at frame's rear to adjust inclined positions, BD base Ø 255 mm, black (profile 25) SU 1 (profile 32) with round chromium corners SU 1 Liberty 25 with Alu profile frame A2 BD base Ø 255 mm silvergrey, alu-tube fixed length 160 cm, fastening set with jubilee-clips and alu-profile frame A / SU 1 Liberty 35 with Alu-snap frame A1 BD base Ø 345 mm dark grey, fixed alutube 200 cm coated, set for fastening with jubilee clips and alu-snap type frame A1 (profile 32) with round chromium corners / SU 1 127

10 ALU- Banner-stand "Liberty" 25 BD base Ø 255 mm silvergrey, adjustable alu-tube cm with locking screw, set for fastening with jubilee clips and alu-snap rails (2-part) length 600 mm / SU 1 Banner-stand "Liberty" 35 BD base Ø 345 mm dark grey, fixed alutube 200 cm coated, set for fastening with jubilee clips and alu-snap rails (2-part) length 600 mm / SU 1 128

LEAFLET DISPENSER LEAFLET DISPENSER Leaflet dispenser PS 1 BD base Ø 255 mm black with fixed alutube 800 mm, acrylic box A4, fixed with black hinge on box's rear to adjust inclined position

11 LEAFLET DISPENSER LEAFLET DISPENSER Leaflet dispenser PS 1 BD base Ø 255 mm black with fixed alutube 800 mm, acrylic box A4, fixed with black hinge on box's rear to adjust inclined position /800...SU 1 Leaflet dispenser PS 3 Stand made of anodised aluminium with 3 acrylic dispensers A4. Size (W/H/D): 26/120/28 cm SU 1 Leaflet dispenser PS 6 Stable stand made of anodised aluminium with 6 acrylic dispensers A4, both sides with 3 dispensers each. Size (W/H/D): 35/145/35 cm SU 1 129

LEAFLET DISPENSER LEAFLET DISPENSER Leaflet dispenser PS 8 Modern design made of anodised aluminium with 8 acrylic dispensers A4. Size (W/H/D): 52/142/35 cm 61030-00.

12 LEAFLET DISPENSER LEAFLET DISPENSER Leaflet dispenser PS 8 Modern design made of anodised aluminium with 8 acrylic dispensers A4. Size (W/H/D): 52/142/35 cm SU 1 Leaflet dispenser PS 12 Movable stand made of anodised aluminium with four rollers incl. locking, with 12 acrylic dispensers A4. Size (W/H/D): 75/160/50 cm SU 1 130

13 Notes 131

SECURELY HELD. OKW ACCESSORIES are designed to be practical, thus providing you with more flexibility for your individual case.

SECURELY HELD. OKW ACCESSORIES are designed to be practical, thus providing you with more flexibility for your individual case. SECURELY HELD RATIONAL HINGE AND LOCKING TECHNIQUES For easy opening of the devices. THE PRODUCT WALL / RAIL OKW offers you a comprehensive range of. Adapted to the application, our standard cases can