PROCON PRODUCTS Micro Vane pumps - Model Number Matrix 6 1 A 1 A C F 2 D A X 180

Transcription

1 Micro Vane pumps - Model Number Matrix 6 1 A 1 A C F 2 D A X 180 PRODUCT CLASSIFICATION PRESSURE SETTING (RELIEVE VALVE) 6-3/16" VANE PUMP PRESSURE SETTING IN PSI (POUNDS PER SQ. IN.) AGENCY APPROVALS PUMP CONFIGURATION 1 - NSF M - MAG DRIVE VANE PUMP- STD. NEO MAGNETS 2 - WRC X - VANE STYLE WITH MECHANICAL SEAL 3 - NSF/WRC 4 - NON NSF/WRC PRESSURE RANGE (RELIEF VALVE SPRING) A TO 180 PSI - DEFAULT SETTING 180 PSI MOTOR POWER AND VOLTAGE B TO 150 PSI - DEFAULT SETTING 130 PSI A - BDM4542S0036 MODIFIED DC MOTOR C - 60 TO 99 PSI - DEFAULT SETTING 99 PSI B - 12V DC MOTOR-BRUSHED - 50W D - 30 TO 59 PSI - DEFAULT SETTING 50 PSI C - 24V DC MOTOR-BRUSHED-110W D - BRUSHED 230VAC MOTOR VALVE TYPE AND CONFIGURATION E - 42BLFX02D BRUSHLESS DC MOTOR - (IPC) A - PLASTIC, HI TEMP-BYPASS F - BRUSHLESS 12VDC MOTOR W/CONTROLLER (HURST) B - PLASTIC, HI TEMP-SOLID G - BRUSHLESS 24VDC MOTOR W/CONTROLLER (HURST) C - PLASTIC, HI TEMP BALANCED BYPASS D - PLASTIC, HI TEMP BALANCED SOLID CORD TYPE F - PLASTIC, HI TEMP-EXTERNAL ADJUST BYPASS 1 - STANDARD G - PLASTIC, HI TEMP-EXTERNAL ADJUST SOLID 2 - ALTERNATE CONFIGURATION P - BRASS, HI TEMP-SOLID R - STAINLESS STEEL, HI TEMP-SOLID HOUSING MATERIAL AND PORT CONFIGURATION A - STAINLESS STEEL WITH G 1/8 PORTS (SPCL). ROTATION B - LOW LEAD BRASS WITH G 1/8 PORTS (N /A) 1 - CLOCKWISE C - LOW LEAD BRASS WITH 1/8" NPT PORTS (N/A) 2 - COUNTERCLOCKWISE D - STAINLESS STEEL HOUSING WITH G 1/8" PORTS (STD.) E - STAINLESS STEEL HOUSING WITH 1/8" NPT PORTS (STD.) ELASTOMER F - STAINLESS STEEL HOUSING WITH G1/4 PORTS - MAG ONLY F - FDA GRADE NITRILE G - ETHYLENE PROPYLENE FLOWRATE R- -FLUOROCARBON A - B - 15 GPH (45 LPH) C - 25 GPH (75 LPH) D - 35 GPH (100LPH) NOTES: (N/A) - NOT AVAILABLE AT THIS TIME NSF - AVAILABLE ONLY FOR NITRILE ELASTOMER ONLY. WRC - AVAILABLE FOR ETHYLENE PROPYLENE ELASTOMER ONLY FLUOROCARBON ELASTOMER IS USED ONLY FOR NON NSF/WRC PUMPS PSI SETTING - THE RELIEF VALVE SETTING IS NOT A PART OF THE MODEL NUMBER AND IS FOR CUSTOMER REFERENCE ONLY. Drawing #2172 Rev G - mea ECN #C2952

2 expresso Micro Gear pumps - Model Number Matrix 5 1 A 1 A C F 2 G X X PRODUCT CLASSIFICATION 5 - GEAR PUMP AGENCY APPROVALS NOT USED 1 - NSF X - RESERVED FOR FUTURE USE 2 - WRC 3 - NSF/WRC NOT USED 4 - NON NSF/WRC X - RESERVED FOR FUTURE USE MOTOR POWER AND VOLTAGE SEAL STYLE A VDC BRUSHLESS MOTOR (BL) M- GEAR PUMP WITH MAG DRIVE B BRUSHED 24V DC MOTOR- 40W (GBM) G - POSITIVE DRIVE SEAL - CARBON C BRUSHED 24V DC MOTOR- 20W (GBM) S - POSITIVE DRIVE SEAL - SILICONE CARBIDE D BRUSHED 24V DC MOTOR- 60W (GBM) E VDC - HURST - (MAG) ROTATION 1 - CLOCKWISE (N/A) CORD TYPE 2 - COUNTERCLOCKWISE 1 - STANDARD 2 - ALTERNATE CONFIGURATION ELASTOMER F - FDA GRADE NITRILE with EPDM SEAL HOUSING MATERIAL AND PORT CONFIGURATION G - ETHYLENE PROPYLENE with EPDM SEAL A - SPCL STAINLESS STEEL WITH G 1/8" PORTS R - FLUOROCARBON with EPDM SEAL B STAINLESS STEEL WITH G 1/8" PORTS T - EPDM with EPDM SEAL (SPECIAL 281) C - PLASTIC HOUSING WITH G 1/8" PORTS (N/A) C - EPDM with EPDM SEAL (TRISUN) D STAINLESS STEEL WITH 1/8 NPT PORTS (N/A) E - PLASTIC HOUSING WITH 1/8 NPT PORTS (N /A) FLOWRATE A - B - C - 13 Tooth x 10mm D - NOTES: (N/A) - NOT AVAILABLE AT THIS TIME WRC - AVAILABLE FOR ETHYLENE PROPYLENE ELASTOMER ONLY FLUOROCARBON ELASTOMER IS USED ONLY FOR NON NSF/WRC PUMPS "T" STYLE EP ELASTOMER FOR SPECIAL CUSTOMER ONLY. NSF - AVAILABLE FOR "F, T, and C" ELASTOMERS ONLY. NSF - AVAILABLE FOR "G' SEAL ONLY AT THIS TIME. Drawing #2187 Rev F mea

3

4

5 GEAR PUMP - 24VDC BRUSHED MOTOR PRODUCT DESCRIPTION PEEK CARBON FILLED GEARS STAINLESS STEEL HOUSING CONSTRUCTION UNS31600 STAINLESS STEEL SHAFT OR PUMP SHAFT 24VDC BRUSHED MOTOR NITRILE, EP, AND FLUOROCARBON ELASTOMERS PORTS G1/8" GAS PROCON PRODUCTS FOOD SERVICE GROUP 896 Seven Oaks Blvd, Suite 120 Telephone (615): mail@proconpump.com Smyrna, TN Fax: (615)

6 GEAR PUMP - 24VDC BRUSHED MOTOR SPECIFICATION SHEET PUMP Flow Characteristics Max Operating Pressure 6 Bar Suction lift 1 meter Maximum Inlet Pressure 5 Bar MOTOR Type Brushed DC Motor Voltage 24 DC Amps Bearings BALL/BALL Speed Variable Duty Cycle Intermittent Sound Level 55 dba Insulation Class B Max Ambient temperature 50 C Unit Weight.7 Kg Agency Approvals NSF MicroGear Performance Curve 24VDC Brushed Motor LPH A bar Flow Rate (6mm Tube ID) Flow Rate (4mm Tube ID) Input Current (6mm Tube ID) Input Current (4mm Tube ID) PROCON PRODUCTS FOOD SERVICE GROUP 869 Seven Oaks Blvd, Suite 120 Telephone (615): mail@proconpump.com Smyrna, TN USA Fax: (615)

7 expresso Micro Gear pumps - Model Number Matrix PRODUCT CLASSIFICATION 5 - GEAR PUMP 5 1 A 1 A C F 2 G X X AGENCY APPROVALS NOT USED 1 - NSF X - RESERVED FOR FUTURE USE 2 - WRC 3 - NSF/WRC NOT USED 4 - NON NSF/WRC X - RESERVED FOR FUTURE USE MOTOR POWER AND VOLTAGE A VDC BRUSHLESS MOTOR (BL) B BRUSHED 24V DC MOTOR- 40W (GBM) SEAL STYLE M- GEAR PUMP WITH MAG DRIVE G - POSITIVE DRIVE SEAL ROTATION 1 - CLOCKWISE (N/A) 2 - COUNTERCLOCKWISE CORD TYPE 1 - STANDARD ELASTOMER 2 - ALTERNATE CONFIGURATION F - FDA GRADE NITRILE G - ETHYLENE PROPYLENE HOUSING MATERIAL AND PORT CONFIGURATION R - FLUOROCARBON A - SPCL STAINLESS STEEL WITH G 1/8" PORTS T- ETHYLENE PROPYLENE (SPECIAL) B STAINLESS STEEL WITH G 1/8" PORTS C - PLASTIC HOUSING WITH G 1/8" PORTS (N/A) FLOW RATE D STAINLESS STEEL WITH 1/8 NPT PORTS (N/A) A - E - PLASTIC HOUSING WITH 1/8 NPT PORTS (N /A) B - C - 13 Tooth x 10mm D - NOTES: (N/A) - NOT AVAILABLE AT THIS TIME NSF - AVAILABLE ONLY FOR NITRILE ELASTOMER ONLY. WRC - AVAILABLE FOR ETHYLENE PROPYLENE ELASTOMER ONLY FLUOROCARBON ELASTOMER IS USED ONLY FOR NON NSF/WRC PUMPS "T" STYLE EP ELASTOMER FOR SPECIAL CUSTOMER ONLY. PROCON PRODUCTS FOOD SERVICE GROUP 896 Seven Oaks Blvd, Suite 120 Telephone (615): mail@proconpump.com Smyrna, TN Fax: (615)

8 Micro PRO Espresso Pump STAINLESS STEEL CONSTRUCTION 170mm IN LENGTH PATENTED TWIN CAVITY PUMPING TECHNOLOGY PATENTED CAM RING TECHNOLOGY 8 VANES FOR LOW PULSATION 24V DC BRUSHLESS VARIABLE SPEED MOTOR PORTS G1/8 OR 1/8 NPT NITRILE, FLUOROCARBON OR EP ELASTOMERS AVAILABLE UP TO 40 9 BAR RODUCTS P SPECIFICATIONS PUMP Flow Characteristics Max Continuous Operating Pressure 10 Bar Max Relief Valve Setting 14 Bar Relief Valve Construction See Model Matrix Suction lift 1 meter Maximum Inlet Pressure 7 Bar DIAL ROTOR LOADING AND VANES N CONTACTING DURING CONTINUOUS OPERATION CTION UNS30300 WITH MAX SULFUR CONTENT OF.13% FT ASTOMERS 1.23 MOTOR Type Motor Voltage Amps Bearings Speed Brushless DC 24V DC BALL/BALL Sound Level Insulation Class Thermally Protected Max Ambient temperature Unit Weight dba B 40 C 1 kg /8-27 NPT OR G 1/8 BSPP PORTS M4x0.5-6H 4 PLACES MOTOR CONNECTION MOTOR CONNECTION PIN SIGNAL CONNECTOR PIN MOTOR PLUG POWER SUPPLY +24 V 1 MOTOR 2 POWER SUPPLY GND 2 MOTOR 3 HALL U 3 MOTOR 4 HALL V U V W 5 HALL W World Wide Headquarters 910A Ridgely Road Murfreesboro, TN U.S.A. tel: (615) Fax: (615) MOTOR CONNECTION mail@proconpump.com Standex International S.r.I., Via 1 Maggio, Gorgonzola (MI) Italy tel: +39 (02) ext. 213 fax: +39 (02) solari.standex@standexinternational.191.it solari@standex.com MOTOR CONNECTION PIN SIGNAL CONNECTOR PIN MOTOR PLUG 1 POWER SUPPLY +24 V 1 MOTOR 2 POWER SUPPLY GND 2 MOTOR 3 HALL U 3 MOTOR 4 HALL V 5 HALL W Standex (Ireland) Limited Irishtown, Mountmellick, Co. Laois Republic of Ireland tel: +353 (5786) fax: +353 (5786) sales@standex.ie QUALITY PRODUCTS DELIVERED ON TIME Standex International GmbH Koelner Strasse Krefeld Germany tel: fax: m.schmalohr@standex-gmbh.de

9 BRUSHLESS DC VANE PUMP MODEL MATRIX Micro PRO Espresso Pump expresso Micro 6 1 A 1 D C F 1 F B X 130 PRODUCT CLASSIFICATION PRESSURE SETTING (RELIEVE VALVE) 6-3/16" VANE PUMP PRESSURE SETTING IN PSI (POUNDS PER SQ. IN.) AGENCY APPROVALS NOT USED 1 - NSF X - RESERVED FOR FUTURE DEVELOPMENT 2 - WRC 3 - NSF/WRC PRESSURE RANGE (RELIEF VALVE SPRING) 4 - NON NSF/WRC A TO 180 PSI - DEFAULT SETTING 180 PSI B TO 150 PSI - DEFAULT SETTING 130 PSI MOTOR POWER AND VOLTAGE A - BDM4542S0036 MODIFIED DC MOTOR B - BRUSHED 24V DC MOTOR C - BRUSHED 115V AC MOTOR C - 60 TO 99 PSI - DEFAULT SETTING 99 PSI D - 30 TO 59 PSI - DEFAULT SETTING 50 PSI VALVE TYPE AND CONFIGURATION A - PLASTIC, HI TEMP-BYPASS CORD TYPE B - PLASTIC, HI TEMP-SOLID 1 - STANDARD C - PLASTIC, HI TEMP BALANCED BYPASS 2 - ALTERNATE CONFIGURATION D - PLASTIC, HI TEMP BALANCED SOLID F - PLASTIC, HI TEMP-EXTERNAL ADJUST BYPASS HOUSING MATERIAL AND PORT CONFIGURATION A - STAINLESS STEEL WITH G 1/8" PORTS (SPCL). B - LOW LEAD BRASS WITH B 1/8" PORTS (N/A) C - LOW LEAD BRASS WITH 1/8" NPT PORTS (N/A) D - STAINLESS STEEL HOUSING WITH G 1/8" PORTS (STD.) E - STAINLESS STEEL HOUSING WITH 1/8" NPT PORTS (STD.) FLOW RATE A - B - C - 25 GPH D - G - PLASTIC, HI TEMP-EXTERNAL ADJUST SOLID P - BRASS, HI TEMP-SOLID R - STAINLESS STEEL, HI TEMP-SOLID ROTATION 1 - CLOCKWISE 2 - COUNTERCLOCKWISE ELASTOMER F - FDA GRADE NITRILE G - ETHYLENE PROPYLENE R - FLUOROCARBON NOTES: (N/A) - NOT AVAILABLE AT THIS TIME NSF - AVAILABLE ONLY FOR NITRILE ELASTOMER ONLY. WRC - AVAILABLE FOR ETHYLENE PROPYLENE ELASTOMER ONLY FLUOROCARBON ELASTOMER IS USED ONLY FOR NON NSF/WRC PUMPS PSI SETTING - THE RELIEF VALVE SETTING IS NOT A PART OF THE MODEL NUMBER AND IS FOR CUSTOMER REFERENCE ONLY. ONLY VALVE OPTIONS AVAILABLE FOR THIS UNIT ARE B, D, AND G. PROCON PRODUCTS FOOD SERVICE GROUP 910 Ridgely Road Telephone (615): Murfreesboro, TN USA Fax: (615) mail@proconpump.com EPB-002