SEAL RING (KIT CR4) BALL (KIT CR4) SPRING (KIT CR4) 3/4" MALE STRAIGHT THREAD
|
|
|
- Bernice Bell
- 5 years ago
- Views:
Transcription
1 NOTES: 1. MADE IN THE U.S.A. 1/2" TUBING BARBS (DEFAULT CONNECTION) U.S. PATENT No. 5,863,128 U.S. No. 3,852,076 AND INTERNATIONAL REGISTERED TRADEMARKS MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF) OR ETHYLENE CHLOROTRIFLUOROETHYLENE (ECTFE) INLET/OUTLET CONNECTION: 1" MNPT OR BSPT SUCTION PORT CONNECTION: SEAL RING (KIT CR4) BALL (KIT CR4) SPRING (KIT CR4) 1/2" MNPT (ALTERNATE CONNECTION) INJECTOR CAP MAZZEI PART NO.'s: CAP.75 PP CAP.75 PVDF CAP.75 ECTFE CAP.75 N-PVDF ISO CAP.75 GRPP ISO CAP.75 PVDF DEFAULT - 1/2" I.D. TUBING BARB WITH INTEGRATED CHECK VALVE KIT CR-4 ALTERNATE - 1/2" MNPT - SEE ALTERNATE CAP MODIFICATION DETAIL 3/4" MALE STRAIGHT THREAD 7. INSTALLATION RECOMMENDATION: REFER TO MAZZEI TECHNICAL BULLETIN NO. 11; "MAZZEI INJECTOR INSTALLATION RECOMMENDATIONS FOR GAS TO LIQUID MIXING APPLICATIONS". 8. MAZZEI INJECTOR CO., LLC. 500 ROOSTER DR. BAKERSFIELD, CA TEL: WEB: REMOVE HOSE BARBS FROM CAP AND DISCARD 3mm.13in MAXIMUM STICKOUT 1" MNPT OR BSPT (TYPICAL) INJECTOR BODY MAZZEI PART NO.'s 02 PP 02 PVDF 02 N-PVDF 02 ECTFE ISO GRPP ISO PVDF ISO ECTFE KIT CR-4 TITLE MATERIAL BALL TEFLON (PTFE) SEAL RING KEL-F (PCTFE) SPRING HASTELLOY C-22 VENDOR ITEM CONTROL DRAWING "CAP MODIFICATION DETAIL" (ALTERNATE) UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES DRAWN: T.JOHNS DATE: 10/23/12 SIZE: APPROVED: P. BANKOWSKI A TITLE: 1" INJECTOR; MODEL 02 DRAWING NO.: 02-PP/PVDF/ECTFE WEIGHT: SCALE: REV.: SHEET: N/A 1:2 A 1 OF 2
2 (ISOMETRIC VIEW) (FOR REFERENCE ONLY) 229mm 9.00in 94mm 3.70in SUCTION PORT DATE CODE LOCATION 86mm 3.39in INLET OUTLET MODEL NO. LOCATION (OPPOSITE SIDE) FLOW MATERIAL LOCATION UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES VENDOR ITEM CONTROL DRAWING TITLE: 1" INJECTOR; MODEL 02 DRAWN: T.JOHNS DATE: 10/23/12 SIZE: APPROVED: P. BANKOWSKI A DRAWING NO.: 02-PP/PVDF/ECTFE WEIGHT: SCALE: REV.: SHEET: N/A 1:2 A 2 OF 2
3 Mazzei Company, LLC - Performance Table Model GPH GPH Copyright Mazzei Company, LLC July 2013
4 Mazzei Compnay, LLC- Performance Table Model LPH LPH Copyright Mazzei Company, LLC July 2013
5 Mazzei Company, LLC- Performance Table Model Air Air SCFH Air Air SCFH Copyright Mazzei Company, LLC July 2013
6 Mazzei Company, LLC- Performance Table Model Air Air Air Air Copyright Mazzei Company, LLC July 2013
KIT CR-4 3/4" MALE STRAIGHT THREAD NOTES: MADE IN THE U.S.A. U.S. PATENT No. 5,863,128. U.S. No. 3,852,076 AND INTERNATIONAL REGISTERED TRADEMARKS
NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863,128 3. 4. 5. 6. 7. U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF)
KIT CR-4. 3mm.13in UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES NOTES: MADE IN THE U.S.A. U.S. PATENT No. 5,863,128
NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863,128 3. 4. 5. 6. U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF)
NOTES: MADE IN THE U.S.A. U.S. PATENT No. 5,863,128. U.S. No. 3,852,076 AND INTERNATIONAL REGISTERED TRADEMARKS
NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863,128 3. U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS 4. MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF) OR
Fertigation. Injectors AirJection Injectors Suction and Bypass Kits Parts & Accessories FERTIGATION FERTIGATION
Fertigation Injectors...207 AirJection Injectors...209 Suction and Bypass Kits...210 Parts & Accessories...211 205 206 Injectors Injector Product Range - Models and Kit Assemblies Injector Model Numbers
PRODUCT CATALOG Agriculture
PRODUCT CATALOG Agriculture World Leader in Mixing and Contacting Technologies Differential Pressure Injectors for Fertilization and Other Chemical Applications Product Warranty PERIOD OF WARRANTY. Subject
D 40 ALUMINIUM (CLAMPED)
www.tablapump.com A COMPLETE RANGE OF AIR DIAPHRAGM PUMPS CONGRATULATIONS ON PURCHASING YOUR NEW TABLA PUMP! IMPORTANT: Please read all the installation and safety information carefully before you start
ProMinent delta Solenoid Diaphragm Metering Pumps
Overview: delta Ideal for applications requiring metering pump accuracy with minimal pulsation (see page 127 for spare parts and page 134 for control cables) Continuous or pulsating dosing Configurable
D 25 POLYPROPYLENE (BOLTED)
www.tablapump.com A COMPLETE RANGE OF AIR DIAPHRAGM PUMPS CONGRATULATIONS ON PURCHASING YOUR NEW TABLA PUMP! IMPORTANT: Please read all the installation and safety information carefully before you start
I n j e c t o r s. Different Models. Applications Fertigation Chlorination and acidification Water additives ph and EC control
Fertilizer & Chemical proportional water driven injectors, with no ( other energy required I n j e c t o r s A step up from Different Models Applications Fertigation Chlorination and acidification Water
CORROSION & CHEMICAL RESISTANT VALVES AND ACTUATORS
CORROSION & CHEMICAL RESISTANT VALVES AND ACTUATORS OFFERING YOU ADVANCED TECHNOLOGY, HIGH STANDARD OF QUALITY AND THE GUARANTEE OF A LEADING MANUFACTURER FOR A CUSTOM DESIGNED SOLUTION TO YOUR CORROSIVE
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Features or bspt is externally serviceable Typical Applications Husky 3275 Aluminum DK3XXX Typical Fluids Handled 50 PROCESS EQUIPMENT CATALOG Husky
Valve Accessories NEW! Wanner Engineering Inc
Valve Accessories NEW! Wanner Engineering Inc Back Pressure Valves Diaphragm Back Pressure Valves enhance the performance of precision metering systems by applying a continuous back pressure to the EPM
GRUNDFOS PRODUCT GUIDE DMH. Dosing pumps
GRUNDFOS PRODUCT GUIDE Dosing pumps Contents Features and benefits 3 Performance range 4 Pump selection options 36 Pumped liquids List of pumped liquids 39 Identification Type key 7 Functions Functional
AGRICULTURE GREENHOUSE LANDSCAPE
AGRICULTURE GREENHOUSE LANDSCAPE Fertilizer & Chemical proportional water driven injectors, with no ( other energy required I n j e c t o r s A step up from Different Models Applications Fertigation Chlorination
ProMinent Hydro Hydraulic Diaphragm Metering Pumps
ProMinent Hydro Hydraulic Diaphragm Metering Pumps ProMinent Hydro Hydraulic Diaphragm Metering Pumps NEW hydraulic motor driven metering pumps provide precise and safe metering for high pressure applications.
PTFE PRESSURE REGULATOR
PTFE PRESSURE REGULATOR Our IPS PTFE Pressure Regulator is designed for use in high purity water and aggressive chemicals applications. Designed with a 100% virgin PTFE wetted flow path, the unit is ideal
Models: D-03, G-03, G-13 and M-03
Parts Manual D03-991-2402C Models: D-03, G-03, G-13 and M-03 Kel-Cell and Standard Versions IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date
Model 6330 COSASCO Retractable System Injection/Sampling Tube Assemblies
Model 6330 COSASCO Retractable System Injection/Sampling Tube Assemblies Order Length A Dimension Inches mm 18 24.54 623 24 30.54 775 30 36.54 928 36 42.54 1080 Specifications: Pressure Rating 1500 PSI
Ultra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
INJECTION CHECK VALVE DISCHARGE TUBING SPACER, E.P.U
INJECTION CHECK VALVE DISCHARGE TUBING COUPLING NUT 4 FUNCTION VALVE SPACER, E.P.U PUMP HEAD RETURN LINE (PRESSURE RELIEF) METERING PUMP HOUSING SPEED KNOB STROKE KNOB SUCTION FITTING SUCTION TUBING WEIGHT
CALL GRIFFCO CHEMICAL PUMP ACCESSORIES
Griffco Valve Inc. 6010 N. Bailey Ave., Suite 1B Amherst, NY 14226 USA PH: +1 716 835-0891 FAX: +1 716 835-0893 CHEMICAL PUMP ACCESSORIES CALL 1-800 - GRIFFCO BACK PRESSURE VALVES Griffco M & G-Series
Materials: Parts of the pump in contact with the liquid are manufactured from the following standard
Plastic Centrifugal Pump For Chemical Process DIN EN 22858 (ISO 2858)Standard DESCRIPTION pumps are manufactured to DIN EN 22858 (ISO 2858) standards in respect of design, performance and dimensions. They
Mister Mist r Injection Check Valve and Accessories
Mister Mist r Injection Check Valve and Accessories Higher Yields Any Crop 800-446-5328 www.agri-inject.com Mister Mist r Injection Check Valve and Bleeder Valve The ultimate in fluid injection efficiency
Air Inlet/ Discharge Port
Metering Pumps The ProMinent is a pneumatically-actuated metering pump with a capacity in the 0.1 to 3.9 gph (0.24 to 14.8 l/h) range at maximum backpressures of 21 to 232 psig (0.9 to 16 bar). The consists
Signet 515 Rotor-X Paddlewheel Flow Sensors
Signet 515 Rotor-X Paddlewheel Flow Sensors Features Operating range 0.3 to 6 m/s (1 to 20 ft/s) Wide turndown ratio of 20:1 Highly repeatable output Simple, economical design Installs into pipe sizes
EXCEL EXCEL XR DATA SHEET. Metering Pump. Manual, Enhanced, and Communications Models. Applications. Performance Specifications. Features and Benefits
EXCEL XR Metering Pump EXCEL XR Manual, Enhanced, and Communications Models The EXCEL XR metering pump is a mechanically actuated diaphragm pump driven by advanced variable speed technology to provide
MODELS: G-20, G-21, G-22
PARTS MANUAL G20-991-2402A IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODELS: G-20, G-21, G-22 Serial No. Date of Purchase When ordering parts or making
Identity code: Meta MTMa Diaphragm Metering Pumps Series: Meta diaphragm-type metering pump Version a
Identity code: Meta MTMa Diaphragm Metering Pumps MTMa Series: Meta diaphragm-type metering pump Version a H A Main drive Add-on drive Pump version: New Cross Reference Conversion Table from former version
For a quote, call us ADVANTAGES OF SERIESLOCK INCLUDE:
SLDATA-0319 Patents Pending SeriesLock, a new innovative fluid coupler, allows a larger volume of fluid to pass through it at lower line pressures. ADVANTAGES OF SERIESLOCK INCLUDE: Spring-Free Flow Path
Hydra-Cell Metering Accessories and Options
Hydra-Cell Metering Accessories and Options P Series System Illustration PULSATION DAMPENER (OPTIONAL) BACK PRESSURE VALVE RELIEF VALVE (To process) PRESSURE GAUGE CALIBRATION CYLINDER CONTROLLERS & MOTORS
Materials of Construction Head materials in PVDF, 316 SS, and PP Ball Valves - Ceramic, and 316 SS Diaphragm - PTFE faced Hypalon.
Pulsafeeder Technology Since 1936, Pulsafeeder has been the global leader in fluids handling technology and innovation in chemical dosing. Pulsafeeder has built a foundation of success with thousands of
Selection Guide for P Series Pump Accessories & Options
Selection Guide for P Series Pump Accessories & Options Contents Page Calibration Cylinders...2 Back Pressure & Pressure Relief Valves...3 Pulsation Dampeners...6 Motors & Controllers...9 Calibration Cylinders
ProMinent Beta Solenoid Diaphragm Metering Pumps
Overview: Beta Ideal for basic chemical feed applications (see page 127 for spare parts, page 138 for accessory kits and page 138 for control cables) ProMinent pk_1_004_1 Capacity range 0.2-8.4 gph, 232-29
450FB and 460FB Flow Back Manifolds
450FB and 460FB Flow Back Manifolds The 450FB and 460FB flow back valves allow pressure from the boom lines to be relieved back to the tank when the valve is switched to the off position. Available with
NDP-25 Specifications
NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air
G66 Series API bar (250 psi) for Non-metallic Pump Heads. G66 with Ductile Iron pump head. G66 with Polypropylene pump head.
G66 Series Maximum Flow Rate: Maximum Pressure: 248.7 l/min (65.7 gpm) 48 bar (7 psi) for Metallic Pump Heads 17 bar (25 psi) for Non-metallic Pump Heads API 674 ATEX G66 with Ductile Iron pump head www.hydra-cell.eu
Signet ph/orp Electrodes
Signet 2724-2726 ph/orp Electrodes Compatible with ALL Signet ph/orp Instruments Features Patented reference design for exceptional performance * Mounts in Signet standard fittings from DN15 to DN100 (½
Low Pressure Series - Accessories. High Pressure Series - Accessories
Low Pressure Series - Accessories STCO 50 Low Pressure Variable Spray Gun - Bronze Max. Pressure: 0Bar(50PSI) Inlet: /2 FBSP Max. Flow: 6GPM(23Lt/Min) 60 C(40 F) STCO 50-SS Low Pressure Variable Spray
Signet ph/orp Electrodes
Signet 2734-2736 ph/orp Electrodes Compatible with Signet 8900/9900 Instruments Features Patented reference design for exceptional performance * Mounts in Signet standard fittings from DN15 to DN100 (½
ProMinent Sigma/ 1 Motor Diaphragm Metering Pumps
Overview: Sigma/ 1 (S1Cb) The Sigma/1 motor diaphragm are produced with a high-strength inner housing for parts subject to load as well as an additional plastic housing to protect against corrosion. The
Series C1 Electronic Metering Pump. Specification Sheet and Assembly Details Manual No : 1619, 1829 Rev. : G, D Rev. Date : 6/09, 10/2015
INJECTION CHECK VALVE COUPLING NUT DISCHARGE TUBING 4 FUNCTION VALVE PUMP HEAD SPACER, E.P.U. METERING PUMP HOUSING RETURN LINE (PRESSURE RELIEF) SPEED KNOB STROKE KNOB SUCTION FITTING SUCTION TUBING WEIGHT
ProMinent Sigma/ 3 Motor Diaphragm Metering Pumps
Overview: Sigma/ 3 (S3Cb) The Sigma/3 motor diaphragm are produced with a high-strength metal inner housing for parts subject to load as well as an additional plastic housing to protect against corrosion.
INSTALLATION AND SERVICE MANUAL FOR TURBO-CARB HIGH CAPACITY CARBONATOR
Please refer to the Lancer web site (www.lancercorp.com) for information relating to Lancer Installation and Service Manuals, Instruction Sheets, Technical Bulletins, Service Bulletins, etc. INSTALLATION
ÄKTA avant 150. Product Documentation
ÄKTA avant 150 Product Documentation Table of Contents Table of Contents 1 Introduction... 1.1 Instrument view... 1.2 Liquid flow path... 2 General specifications... 2.1 System specifications... 2.2 Enviromental
Signet ph/orp Electrodes
Signet 2724-2726 ph/orp Electrodes Compatible with ALL Signet ph/orp Instruments Features Flat Glass Protected Bulb Patented reference design for exceptional performance * Mounts in Signet standard fittings
ProMinent EXtronic Solenoid Diaphragm Metering Pumps
Overview: EXtronic Ideal for explosion-proof applications (see page 126 for spare parts) The ProMinent EXtronic series represents a proven technology for metering liquid media in hazardous areas classified
Signet 515 Rotor-X Paddlewheel Flow Sensors
Signet 515 Rotor-X Paddlewheel Flow Sensors Features Operating range 0.3 to 6 m/s (1 to 20 ft/s) Wide turndown ratio of 20:1 Highly repeatable output Simple, economical design Installs into pipe sizes
T Series Pump Guide WEBSTER PUMPS
T Series Pump Guide WEBSTER PUMPS 12 Q U A L I T Y S E R V I C E I N T E G R I T Y T Series Vertical Seal-less Immersible Pump 1/3, 1/2, 3/4, 1, 1-1/2 Hp The new T Series Webster by Hayward thermoplastic
EXCEL EXCEL XR DATA SHEET. Metering Pump. Manual, Enhanced, and Communications Models. Applications. Performance Specifications. Features and Benefits
EXCEL XR Metering Pump EXCEL XR Manual, Enhanced, and Communications Models The EXCEL XR metering pump is a mechanically actuated diaphragm pump driven by advanced variable speed technology to provide
tubing, faucets and fittings
small Bore teflon ptfe tubing Order by the Foot* Superior Chemical Resistance High degree of flexibility allows multiple twists and turns in tight spaces Non-stick surface will not collect particulates
CUMMINS N-14 Pump Mount to Frame Filter Conversion
CUMMINS N-14 Pump Mount to Frame Filter Conversion For Trucks Equipped with Cummins N-14 Engines Kit No. 905-02-0200-H PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION Providing
ProMinent EXtronic Solenoid Diaphragm Metering Pumps
Overview: EXtronic Ideal for explosion-proof applications (see page 128 for spare parts) The ProMinent EXtronic series represents a proven technology for metering liquid media in hazardous areas classified
115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
PROCON PRODUCTS Micro Vane pumps - Model Number Matrix 6 1 A 1 A C F 2 D A X 180
Micro Vane pumps - Model Number Matrix 6 1 A 1 A C F 2 D A X 180 PRODUCT CLASSIFICATION PRESSURE SETTING (RELIEVE VALVE) 6-3/16" VANE PUMP PRESSURE SETTING IN PSI (POUNDS PER SQ. IN.) AGENCY APPROVALS
Series C9 Electronic Metering Pump. Specification Sheet and Assembly Details Manual No : 1619, 1795 Rev. : G, E Rev. Date : 6/09, 10/2015
INJECTION CHECK VALVE COUPLING NUT DISCHARGE TUBING 4 FUNCTION VALVE PUMP HEAD SPACER, E.P.U. METERING PUMP HOUSING RETURN LINE (PRESSURE RELIEF) SPEED KNOB STROKE KNOB SUCTION FITTING SUCTION TUBING WEIGHT
Fluid Dispensing Systems
Fluid Dispensing Systems Automotive Commercial Industrial Diesel Exhaust Fluid (DEF) Open Systems Drum and Tote Packages Lever Pump System EPDM seals for maximum chemical compatibility. Includes 1300-028
Multi-Port Gauge Valves M5 and M51
Multi-Port Gauge Valves M5 and M51 M5 Product Overview The M5 and M51 are multi-port gauge valves allowing the versatile positioning of gauges or pressure switches without requiring additional penetration
PROTEUS Series Metering Pumps
PROTEUS Series Metering Pumps DATA SHEET Manual, Enhanced, and Communications Models The PROTEUS chemical metering pump is a mechanically actuated diaphragm pump driven by advanced variable speed technology
Signet 2536 Rotor-X Paddlewheel Flow Sensors
Signet 2536 Rotor-X Paddlewheel Flow s Features Operating range 0.1 to 6 m/s (0.3 to 20 ft/s) Wide turndown ratio of 66:1 Open-collector output Highly repeatable output Simple, economical design PVC (gray
Models: D-12, G-12. Parts Manual D D WANNER ENGINEERING, INC.
Parts Manual D12-991-2402D Models: D-12, G-12 IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts or making inquiries
120 SERIES ONE PIECE TYPE
120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation One-piece ball stem Panel mountable Variety of End Connections Straight,
3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated
![3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated](/thumbs/85/92772568.jpg "3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated")
M50 and H70 ANDERSON GREENWOOD 3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated Features and Benefits Cost savings are realized as the root valves are in-line
USE OF MAZZEI INJECTORS IN PRESSURIZED SPRINKLER APPLICATIONS
USE OF MAZZEI INJECTORS IN PRESSURIZED SPRINKLER APPLICATIONS The selection, installation and use of Mazzei Injectors in pressurized sprinkler systems are simple and straightforward. There are several
F20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads
F2 Series Maximum Flow Rate: 1. gpm (3.8 l/min) Maximum Pressure: 15 psi (13 bar) for Metallic Pump Heads F2 Series Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min F2-E
Thermoplastic Centrifugal Pump Type NMB-S
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33.7 99-0 Fax +49 (0) 57 33.7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Thermoplastic Centrifugal Pump Type NMB-S Suction
EF SERIES PUMPS OPERATION & PARTS MANUAL
EF SERIES PUMPS OPERATION & PARTS MANUAL EU Declaration of Conformity Finish Thompson Inc. hereby declares that the following machine(s) fully comply with the applicable health and safety requirements
Ink Manufacturing and Printing Solutions
Ink Manufacturing and Printing Solutions Solutions for pail, drum, or bulk tank ink applications Springer Pumps, LLC Tel: 866-777-6060 Fax: 866-777-6383 INFO@springerpumps.com Leading The Way In Quality
DATA SHEET 4DX10ER, 4DX15ER, 4DX20ER, 4DX27ER, 4DX30ER DIRECT DRIVE PLUNGER PUMPS. Brass Electric Models: SPECIFICATIONS U.S. Measure Metric Measure
DATA SHEET DIRECT DRIVE PLUNGER PUMPS Brass Electric Models: 4DX10ER, 4DX15ER, 4DX20ER, 4DX27ER, 4DX30ER See page 8 for complete pump model number selection. FEATURES Fits standard 56C face motors. Stacked
PSU ¾ HP PUMP RETROFIT
HI-Q Environmental Products Co. Air Sampling Equipment, Systems & Accessories 7386 Trade Street San Diego, California 92121-2422 Phone: (858) 549-2820 Fax: (858) 549-9657 Web: www.hi-q.net PSU ¾ HP PUMP
1350 Valves. 1 of 14. Jun Illustrated Parts Breakdown Agilent 6890 Gas Chromatograph Service Manual
This section contains illustrated parts breakdowns for the following 6890 GC valves and related components: Valve Box Assembly Valve Driver Assembly Valve Actuator Assembly Valco W-series Minivalve Nickel
The Vario motor-driven pump series from ProMinent Adaptable to a wide range of applications VARIO METERING PUMP
The Vario motor-driven pump series from ProMinent Adaptable to a wide range of applications VARIO METERING PUMP ProMinent Modular design allows selection of the features you need Three diaphragm sizes
SCHMITT. product information. Kreiselpumpen. U Pump Series. normal priming, centrifugal pumps with a single mechanical seal.
SCHMITT Kreiselpumpen chemical resistant pumps for corrosive and highly pure media product information U Pump Series normal priming, centrifugal pumps with a single mechanical seal materials: PVDF Description
ANDERSON GREENWOOD SERIES M9 BLOCK AND BLEED GAUGE VALVES
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation FEATURES GENERAL APPLICATION
103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
High Pressure Ball Valves
High Pressure Ball Valves 79 Valve Options Reliable, simple, operation for on-off service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum
Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation
Graco EP Series Peristaltic Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation More flow per revolution than conventional designs Inexpensive
ASEPTIC-0-RING UNIONS Female Union Union Nut Male Union O-Ring Reduced Female Union Reduced Male Union...
ASEPTIC-0-RING UNIONS Female Union... 68 Union Nut... 69 Male Union... 70 O-Ring... 71 Reduced Female Union... 72 Reduced Male Union... 73 Female Cap... 74 Male Cap... 75 Female Union Female Union Surface
Drum & Container Pumps Installation and Operation Manual. TP-132/150 TP-160 TP-180 TP-280 TP-360 TP-380 TP-400Ex TP-AIR 1 TP-AIR 2 TP-AIR 3 S40675
Drum & Container Pumps Installation and Operation Manual TP-3/50 TP-60 TP-80 TP-80 TP-360 TP-380 TP-00Ex TP-AIR TP-AIR TP-AIR 3 S0675 Index ITEM.............................................................................
Type 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
G03 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G03 Shaft-driven with Stainless Steel pump head
G03 Series Maximum Flow Rate: Maximum Pressure: 11.7 l/min (3.1 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G03 Shaft-driven with Stainless Steel pump
Signet DryLoc ph/orp Electrodes
Signet 2774-2777 DryLoc ph/orp Electrodes Features Patented DryLoc connector with gold plated contacts* Special design allows for installation at any angle, even inverted or horizontal Quick temperature
BULLETIN 340B. Sethco FLOWS TO 275 GPM. Seal-less, End Suction Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer
BULLETIN 340B FLOWS TO 275 GPM Sethco Seal-less, End Suction Magnetic Drive Centrifugal Pumps For Corrosive Liquid and Chemical Transfer SETHCO END SUCTION CORROSION RESISTANT MAGNETIC DRIVE, SEAL-LESS
Gauge Valves. Block and Bleed Valves Multi-Port Valves OS&Y Valves
Gauge Valves Block and Bleed Valves Multi-Port Valves OS&Y Valves Anderson Greenwood is the industry leader in instrument valve technology and the original innovator of the 3-valve manifold. Our capabilities
Husky 716 Metal Pumps Air-Operated Double-Diaphragm
Husky 716 Metal Pumps Air-Operated Double-Diaphragm Features capability for even lower noise levels externally serviceable Husky 716 Aluminum D53XXX or D43XXX Typical Applications Typical Fluids Handled
Pulsation Dampeners (Chargeable-Adjustable)
ACCU-PULSE (Chargeable-Adjustable) Canadian 2018 List 01/18 Rev. 6 TABLE OF CONTENTS Page Page 2 Dampener Sizing Guide 7 ACCU-PULSE Series III (370cu in) 3 ACCU-PULSE Series I (10cu in) 8 ACCU-PULSE Series
Pneumatic Metering Pump II 3 12 l/h
Works without electrical current Mechanical stroke adjustment Space-saving design Separate air bleeding High reliability due to teflon compound diaphragm Optional with integrated solenoid valve Pneumatic
Tubing Size 1/8-1/4 1/8 Flow Chrome Brass 20CB Series Couplings
Tubing Size 1/8-1/4 1/8 Flow Chrome Brass 20CB Series Couplings Produced in food grade chrome plated brass, these 1/8 flow size couplings are more durable and withstand higher pressures. They are available
BULLETIN 340B. Sethco FLOWS TO 275 GPM. Seal-less, End Suction Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer
BULLETIN 34B FLOWS TO 275 GPM Sethco Seal-less, End Suction Magnetic Drive Centrifugal Pumps For Corrosive Liquid and Chemical Transfer SETHCO END SUCTION CORROSION RESISTANT MAGNETIC DRIVE, SEAL-LESS
ProMinent ProMus Hydraulic Diaphragm Metering Pumps
Overview: ProMus High pressure chemical process metering (see page 131 for spare parts) The ProMus is a motor driven metering pump with a hydraulically actuated diaphragm. The drive case and the hydraulic
Diaphragm seal with threaded connection Plastic version Model
Pressure Diaphragm seal with threaded connection Plastic version Model 99.31 WIKA data sheet DS 99. for further approvals see page 5 Applications For aggressive, corrosive or environmentally hazardous
CHEMICAL PUMP ACCESSORIES
Griffco Valve Inc. 6010 N. Bailey Ave., Suite 1B Amherst, NY 14226 USA Phone: 1 716 835-0891 Fax: 1 716 835-0893 CHEMICAL PUMP ACCESSORIES CALL: 1 800 GRIFFCO BACK PRESSURE VALVES Griffco T & G-Series
AGRICULTURE HORTICULTURE GREENHOUSE
AGRICULTURE HORTICULTURE GREENHOUSE Fertilizer & Chemical injectors are water driven only, with no ( other energy required I n j e c t o r s A step up from Different Models Application Fertigation Water
Rocket High Performance Injector. Single Barb. Dual Barb. B Series Injectors. C Series Injectors. Adjustable Water Flow
Rocket High Performance Injector The Rocket injector was designed to be the most versatile venture injector in the marketplace. A superior design that can handle any task you throw at it. Designed to be
AGRICULTURE HORTICULTURE GREENHOUSE
AGRICULTURE HORTICULTURE GREENHOUSE Fertilizer & Chemical injectors are water driven only, with no ( other energy required I n j e c t o r s A step up from Different Models Application Fertigation Water
Repair Parts for Xtreme and XP Xtreme 220cc Lowers
Repair Kit Repair Parts for Xtreme and XP Xtreme 220cc Lowers 40892J EN Important Safety Instructions Read all warnings and instructions in manual 72. Save those instructions. 25D2 Full Repair Kit - Graco
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
Repair Parts for Xtreme and XP Xtreme 180cc Lowers
Repair Kit Repair Parts for Xtreme and XP Xtreme 80cc Lowers 4089J EN Important Safety Instructions Read all warnings and instructions in manual 72. Save those instructions. 25D25 Seal Full Repair Kit
TY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
Anderson Greenwood Series M9 Block and Bleed Gauge Valves
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation Features General application
DIGIFLO ELECTRONIC FLOWMETER
DIGIFLO ELECTRONIC FLOWMETER PIPE FITTING INSTALLATION MANUAL SADDLE MACHINED IN-LINE BODY MOLDED IN-LINE BODY MOLDED TEE Blue-White R Industries, Ltd. F-2000 Page 2 1.0 Temperature vs. Pressure Temperature