PM500FE-B SERIE TECHNICAL DOCUMENTATION
|
|
|
- Kelly Evans
- 5 years ago
- Views:
Transcription
1
2 SUMMARY 1 - Presentation of the PowerMoller product range Page Presentation of the series Page 4 General characteristics Structure and description Applications Characteristics depending on circuit board 3 - Transfer capacity Page 9 Ribbed belt drive 5 - Dimensional characteristics Page 13 Grooved tube - M8 threaded shaft with screw on free end Roller with pulley for ribbed belt- M8 threaded shaft with screw on free end Roller with pulley for round belt - M8 threaded shaft with screw on free end Roller without drive - M8 threaded shaft with screw on free end 6 - Dimensional characteristics - miscellaneous Page 21 PVC sleeve Coated in natural rubber, nitrile rubber and polyurethane Crowned machining 7 - Belt conveyor application Page 22 Condition of use and recommendation Structure Transfer capacity Dimensional characteristics and weigth 8 - Mounting on the frames Page Wiring Page 3 With CB16BP circuit board With HB51BP circuit board 1 - Accessories Page 31 Ribbed belts Extension cables Rounded belts 24 VDC power supply 24 VDC distribution connector Round label Square label 2
3 1 - PRESENTATION OF THE POWER MOLLER PRODUCT RANGE Standard circuit board DC Brushless 9 transfer CB18 CB16 CB16B F-RAT-S HBR-65 CBM-15 CBR-36 CB3 45 transfer CBM-15 External circuit board Integrated circuit board POP-UP CBM-15 CBR-36 ZPA circuit board Ø32 Ø5 HB51 HBK-68 HB51B PM32 HS Ø5 CB18 PM5 ME PM5 XE B&W AS-i 3. Wenglor Molex B&W AS-i 3. Wenglor Molex Module circuit board PM5 FE PM5 VE CBM-15 HB51 IB-E IB-P PM5 XP PM5 XK B&W AS-i 3. Wenglor Molex PEPPERL-FUCHS AS-Interface HBR-65 CBR-36 PM5 FE-B CB16B HB51B PM5 XC PEPPERL-FUCHS AS-Interface Ø6,5 Ø6,5 Network controller PM65 FE CBM-15 HB51 IB-E PM65 XE B&W AS-i 3. Wenglor IB-E PM65 VE IB-P PM65 XP B&W AS-i 3. Wenglor Molex IB-P PM65 FE-B CB16B HB51B Corresponding circuit board PM65 KT CB3 HBK-68 Compatible module / sensor Max load to be conveyed 3 Mechanical brake version
4 2 - PRESENTATION OF THE SERIES technology 24VDC, used with circuit board CB16BP or HB51BP is designed for conveying light and medium loads for order preparation, distribution, and for assembly lines. This circuit board is separated from the gear-motor in order to optimize the performance, durability of the roller and to offer diverse functions such as pulse signals, acceleration/deceleration, optional position holder... The assembly can be controlled by PLC. General characteristics ELECTROMECANICAL CONTROL Direct current and brushless 24 VDC 24 VDC (+ /- 1 %) ripple ratio < 1 % Isolation class Continuous 1% Operation at 4 C Intermittent Brake Dynamic braking, then mechanical braking-operated Protection index Cable length 3 mm with JST connector - 9 pins Protection Thermal protection (>95 C for circuit board, >11 C for motor) Protection against induced voltage Environment Vibrations <,5 G Sound level Speed code Reduction ratio 1/44,9 1/26,67 1/12,64 Brake s torque (Nm) 9,4 4,6 2,2 Absorbed brake power (W) 2,5 Absorbed current brake (A),21 Action time of the mechanical brake 2ms Connector Male 1-pin JST#S9B-XH-A Circuit board functions See the characteristics of CB16BP (page 7) and HB51BP (page 8) The PM5FE-B motorized roller is designed exclusively for indoor use. 4
5 motor side : Heat-treated and phosphated steel shaft Zamac (zinc, aluminium and magnesium alloy) endcaps free side : Ø15mm, Heat-treated and phosphated steel shaft Set screw Tube : Zinc plated steel Tube in precision cold drawn steel, ST37-2 quality, outer diam. 5 mm Zinc-coated or stainless steel (34L) MECANICHAL Pulleys : Stainless steel Ribbed Grooves Ribbed belts,8 teeth, Zamac (zinc, aluminium and or M8 threaded Round belts, diam. 4 or 5 mm with smooth Grooves : Grooves Grooves in different positions from 33 to 3 mm from the edge of the tube Depth 5,8mm Ø 4 or 5 mm Sleeve : Tapered Conical PVC sleeve (PP) for inner radius (Ri) 8 or 85 mm Grey/black PVC sleeve thickness 2 or 3 mm (58 ShA) PVC Lagging : Polyurethane Polymerized polyurethane coating, thickness 3 mm, 9 ShA, grey Natural rubber / nitrile Natural hot vulcanized rubber coating, thickness 3 mm, 6~65 Sha 5
6 Structure and description Shaft at free end Tube Noise and shock aborber bearing at motor end Shaft at motor end Shield with double bearing at free end Applications Drive wheel Planetary gear unit Motor Hall effect sensor Noise and shock aborber Power cable STOP STOP STOP STOP Zero pressure accumulation (ZPA) Position holding Stopping distance controlled by pulsed signal (CB16BP) Lift Cross transfer Turn table Lift table 6
7 Characteristics depending on circuit board WITH CB16BP E LECTROMECHANIC C ONTROL Motor CHARACTERISTICS SPEED CODE 15 SPEED CODE 25 SPEED CODE 55 Absorbed power (W) Tangential force (N) Operation Brake Direct current and brushless 24 VDC nominal 25-67,2 start-up 96 nominal 133,9-143, ,8-46 start-up 349, ,8 Type Mechanical braking then dynamic braking-operated Absorbed power (W) 2,5 Torque (Nm) 9,4 4,6 2,2 Speed (m/min) no load 2,2-17,4 3,7-29,3 7,7-61,7 nominal 2,2-13,3 3,7-25,4 7,7-47,3 (Contact us for other classes) Lenght 35 to 12 mm 325 to 12 mm 325 to 12 mm 3-12 mm = kg per roller Selection of rotation direction Start / Stop, Direction of rotation By dip switch (CW/CCW) or input signal 2 speeds with a rotating switch Speed setting Acceleration / Deceleration Adjustable with potentiometer from to 2,5s Servo-brake activation Pulse signal output (imp./tour) 89,9 53,34 25,28 Over-heating, wiring error, under-voltage, over-voltage... Protection Against polarity reversal /24V and power backfeed, fuse, integrated thermal protection 7
8 E LECTROMECHANIC Motor WITH HB51BP CHARACTERISTICS SPEED CODE 15 SPEED CODE 25 SPEED CODE 55 Absorbed power (W) Tangential force (N) Operation Brake Direct current and brushless 24 VDC nominal 29,3-6 28,8-61,9 29,3-6 start-up 96 nominal 118,6-127,1 67,7-75, 37,9-4,6 start-up 349,8 225,5 111,8 Type Mechanical braking then dynamic braking-operated Abesorbed power (W) 2,5 Torque (Nm) 9,4 4,6 2,2 Nominal speed (m/min) no load 4,3-17,4 7,3-29,3 15,4-61,7 nominal 4,3-13,9 7,3-26,3 15,4-49,4 (Contact us for other classes) Lenght 35 to 12 mm 325 to 12 mm 325 to 12 mm 3-12 mm = kg per roller Speed setting Sensor output signal Protection 1 speeds with a rotating switch Over-heating, wiring error, under-voltage, over-voltage... Recovery sensor state for PLC Against polarity reversal /24V and power backfeed, fuse, integrated thermal protection C ONTROL Sensor timer Run holding timer Jam timer Transfer mode Transfer direction and logic Synchronization function Speed control block area Timing sequence of the motorized roller depending on the sensor status of the downstream zone Timing sequence of the motorized roller depending on the sensor status of the zone to be left Jam/blockage detection of the load depending on the sensor status time Selection of train mode or singulation mode by dip switch Synchronization of several motorized rollers in the same zone The forced start enables evacuating the load of the last zone Speed variation simultaneous and synchronized of several motorized rollers Contact us 8
9 3 - TRANSFER CAPACITY Driven by ribbed belts WITH CB16BP PM5FE-B 15m/min PM5FE-B 25m/min Poids Load de weight la charge (kg) (Kg) Duty Facteur cycle de marche (%) (%) Load Poids weight de la charge (kg) (kg) Duty Facteur cycle de marche (%) % Load weight (kg) Poids de la charge (kg) PM5FE-B 55m/min Duty Facteur cycle de marche (%) % Load to transport 9 slave rollers driven by 1 motorized roller These curves are given as a guide. Transfer capacity depends on the nature and quality of the transported Due to the maximum static load of the PM5FE which convey more than 3 kg but the above curves are giving an idea of the theorical limits of the PM5FE. 9
10 WITH HB51BP 6 PM5FE-B 15m/min 35 PM5FE-B 25m/min 5 3 Load Poids weight de la charge (kg) (kg) Load weight (kg) Poids de la charge (kg) Duty cycle (%) Facteur de marche (%) Duty cycle (%) Facteur de marche % Load weight (kg) Poids de la charge (kg) PM5FE-B 55m/min Duty cycle (%) Facteur de marche % Load to transport 9 slave rollers driven by 1 motorized roller These curves are given as a guide. Transfer capacity depends on the nature and quality of the transported Due to the maximum static load of the PM5FE-B giving an idea of the theorical limits of the PM5FE-B. 1
11 4 - PRESENTATION OF THE DIFFERENT FIXING OPTIONS FREE SIDE FIXING MOTOR SIDE FIXING Ref : A-71-G / A-81-G (optional) Ref : P-B1 / P-C1 (obligatory) Screw M8 x 14 (obligatory) Ref : P-B1 / P-C1 (obligatory) Ref : A-71-G / A-81-G (obligatory) Ref : A-71-G / A-81-G (optional) Ref : A-71-G / A-81-G (obligatory) Ref : C-71 / C-81 (optional) Ref : P-B1 / P-C1 (obligatory) Ref : P-B1 / P-C1 (obligatory) Screw M8 x 14 (obligatory) Ref : C-71 / C-81 (optional) Ref : C-71 / C-81 (optional) Ref : C-71 / C-81 (optional) 11
12 Note : Nut ref. FEY1 should be used with the claw plate ref. P-B1 or P-C1. 2 nuts M5 2 nuts M5 2 spring washer M5 2 spring washer M5 Ref. C-71 Ref. C-81 2 nuts M5 2 spring washer M5 2 spring washer M5 2 nuts M5 12
13 5 - DIMENSIONAL CHARACTERISTICS Grooved tube - Hexagonal shaft with spring on free end PM5FE-B (5EB) - or Ref. C-71 Ref. C-81 PM5FE-B (5EB) - or Ref. C-71 Ref. C-81 or Ref. C-71 Ref. C-81 STEEL TUBE Speed code Dimensions PM5FE-B (5EB) Grooves for steel tube Dimension (B) Tube lenght (L) Depth = 5.8mm G mini G1 mini G2 mini G1+G2 max / 55 STAINLESS STEEL TUBE Speed code WEIGHT / STATIC LOAD / AXIAL FORCE Grooves for stainless steel tube* Dimension (B) Tube lenght (L) Depth = 5,2mm G mini G1 mini G2 mini G1 + G2 max / 55! For a single groove G2=.! *Stainless steel tube : For IP54 version Tube length m/min 3,1 3,2 3,3 3,5 3,7 3,8 4, 4,2 4,3 4,5 Weight 25m/min 2,8 2,9 3,1 3,2 3,4 3,6 3,7 3,9 4,1 4,2 (Kg) 55m/min 2,9 3, 3,1 3,2 3,5 3,6 3,8 3,9 4,1 4,3 Static load max (kg) Axial force max (N) 29 13
14 Grooved tube - M8 threaded shaft with screw on free end PM5FE-B (5EB) PM5FE-B (5EB) STEEL TUBE Speed code Dimensions PM5FE-B (5EB) Grooves for steel tube Dimension (B) Tube lenght (L) Depth = 5.8mm G mini G1 mini G2 mini G1+G2 max / 55 or Ref. C-71 Ref. C-81 STAINLESS STEEL TUBE Speed code Grooves for stainless steel tube* Dimension (B) Tube lenght (L) Depth = 5.2mm G mini G1 mini G2 mini G1+G2 max / 55! For a single groove G2=.! *Stainless steel tube : For IP54 version WEIGHT / STATIC LOAD / AXIAL FORCE Tube length m/min 3,1 3,2 3,3 3,5 3,7 3,8 4, 4,2 4,3 4,5 Weight 25m/min 2,8 2,9 3,1 3,2 3,4 3,6 3,7 3,9 4,1 4,2 (Kg) 55m/min 2,9 3, 3,1 3,3 3,4 3,6 3,8 3,9 4,1 4,3 Static load max (kg) Axial force max (N) 29 14
15 Roller with pulley for ribbed belt - Hexagonal shaft with spring on free end PM5FE-B (5EB) or Ref. C-71 Ref. C-81 PM5FE-B (5EB) or Ref. C-71 Ref. C-81 or Ref. C-71 Ref. C-81 Speed code Dimension (B) Dimensions PM5FE-B (5EB) Tube lenght (L) / 55 WEIGHT / STATIC LOAD / AXIAL FORCE Tube length m/min 3,3 3,5 3,7 3,8 4, 4,1 4,3 4,5 4,6 Weight 25m/min 3, 3,1 3,2 3,4 3,6 3,7 3,9 4,1 4,2 4,4 (Kg) 55m/min 3, 3,1 3,2 3,4 3,6 3,8 3,9 4,1 4,3 4,4 Static load max (kg) Axial force max (N) 29 15
16 Roller with pulley for ribbed belt - M8 threaded shaft with screw on free end PM5FE (5EB) Vis M8 PM5FE (5EB) Vis M8 or Ref. C-71 Ref. C-81 Speed code Dimension (B) Dimensions PM5FE-B (5EB) Tube lenght (L) / 55 WEIGHT / STATIC LOAD / AXIAL FORCE Tube length m/min 3,2 3,3 3,4 3,6 3,8 3,9 4,1 4,2 4,4 4,6 Weight 25m/min 2,9 3, 3,2 3,3 3,5 3,7 3,8 4, 4,1 4,3 (Kg) 55m/min 3, 3, 3,2 3,4 3,5 3,7 3,9 4, 4,2 4,4 Static load max (kg) Axial force max (N) 29 16
17 Roller with pulley for round belt - Hexagonal shaft with spring on free end PM5FE-B (5EB) or Ref. C-71 Ref. C-81 PM5FE-B (5EB) - or Ref. C-71 Ref. C-81 ou Ref. C-71 Ref. C-81 Speed code Dimension (B) Dimensions PM5FE-B (5EB) Tube lenght (L) / 55 WEIGHT / STATIC LOAD / AXIAL FORCE Tube length m/min 3,3 3,5 3,7 3,8 4, 4,1 4,3 4,5 4,6 Weight 25m/min 3, 3,1 3,2 3,4 3,6 3,7 3,9 4,1 4,2 4,4 (Kg) 55m/min 3, 3,1 3,2 3,4 3,6 3,8 3,9 4,1 4,3 4,4 Static load max (kg) Axial force max (N) 29 17
18 Roller with pulley for round belt - M8 threaded shaft with screw on free end PM5FE-B (5EB) (M8 bolt) PM5FE-B (5EB) - (M8 bolt) ou Ref. C-71 Ref. C-81 Speed code Dimension (B) Dimensions PM5FE-B (5EB) Tube lenght (L) / 55 WEIGHT / STATIC LOAD / AXIAL FORCE Tube length m/min 3,2 3,3 3,4 3,6 3,8 3,9 4,1 4,2 4,4 4,6 Weight 25m/min 2,9 3, 3,2 3,3 3,5 3,7 3,8 4, 4,1 4,3 (Kg) 55m/min 3, 3,1 3,2 3,4 3,5 3,7 3,9 4, 4,2 4,4 Static load max (kg) Axial force max (N) 29 18
19 Roller without drive - Hexagonal shaft with spring on free end PM5FE-B (5EB) or Ref. C-71 Ref. C-81 PM5FE-B (5EB) or Ref. C-71 Ref. C-81 or Ref. C-71 Ref. C-81 Speed code Dimension (B) Dimensions PM5FE-B (5EB) Tube lenght (L) / 55 WEIGHT / STATIC LOAD / AXIAL FORCE Tube length m/min 3,2 3,3 3,5 3,7 3,8 4, 4,2 4,3 4,5 Weight 25m/min 2,8 2,9 3,1 3,2 3,4 3,6 3,7 3,9 4,1 4,2 (Kg) 55m/min 2,8 3, 3,1 3,2 3,5 3,6 3,8 3,9 4,1 4,3 Static load max (kg) Axial force max (N) 29 19
20 Roller without drive - M8 threaded shaft with screw on free end PM5FE-B (5EB) PM5FE-B (5EB) - or Ref. C-71 Ref. C-81 Speed code Dimension (B) Dimensions PM5FE-B (5EB) Tube lenght (L) / 55 WEIGHT / STATIC LOAD / AXIAL FORCE Tube length m/min 3,2 3,3 3,5 3,7 3,8 4, 4,2 4,3 4,5 Weight 25m/min 2,7 2,9 3,1 3,2 3,4 3,6 3,7 3,9 4,1 4,2 (Kg) 55m/min 2,8 3, 3,1 3,3 3,4 3,6 3,8 3,9 4,1 4,3 Static load max (kg) Axial force max (N) 29 2
21 6 - DIMENSIONAL CHARACTERISTICS - MISCELLANEOUS PVC sleeve Sleeved by compressed air Thickness L (mm) Ø (mm) D (mm) Hardness (mm) ~58 shore A 3 56 Cylindrical tube Thickness L (mm) Ø (mm) D (mm) SL (mm) (mm) Grooves tube Coated in natural rubber, nitrile rubber and polyurethane Material Characteristics Hardness (ShA) Natural rubber and reduces noise. Do not use in contact with hydrocarbon, oil or grease. 6~65 Nitrile rubber oil and grease. Polyurethane High resistance to abrasion, tearing and oil. 9 Thickness (mm) 3 L (mm) Ø (mm) D (mm) 5 56 Cylindrical tube L (mm) Ø (mm) D (mm) SL (mm) Grooves tube 21
22 7 - BELT CONVEYOR APPLICATION Condition of use and recommendation Conveying direction Tension system always on the return roller Slider bed Different types of support table Roller table Motorized roller Shaft or holding roller Return roller Mount the motorized roller downstream of the conveying direction and the return roller upstream. Structure To resist to the belt tension, reinforced endcaps, with two precision ball bearings are mounted on the roller. 22
23 Transfer capacity SPEED CODE 15 Weigth Kg 4 Conveyor s length 5mm Weigth Kg 4 Conveyor s length 1mm μ =,5 μ =,3 μ =, μ =,5 μ =,3 μ =, width mm width mm Weigth Kg 4 Conveyor s length 15mm Weigth Kg 35 Conveyor s length 2mm μ =,5 μ =,3 μ =,2 5 width mm μ =,5 μ =,3 μ =,2 width mm 23
24 SPEED CODE 25 Conveyor s length 5mm Conveyor s length 1mm Weigth Kg 25 Weigth Kg μ =,5 15 μ =,5 1 μ =,3 μ =,2 1 μ =,3 μ =,2 5 5 width mm width mm Weigth Kg 25 Conveyor s length 15mm Weigth Kg 18 Conveyor s length 2mm μ =, μ =,5 1 μ =,3 μ =,2 8 6 μ =,3 μ =,2 5 width mm 4 2 width 3 4 mm 24
25 SPEED CODE 55 Weigth Kg 12 Conveyor s length 5mm Weigth Kg 1 Conveyor s length 1mm μ =,5 μ =,3 μ =, μ =,5 μ =,3 μ =, Conveyor s length 15mm Conveyor s length 2mm Weigth Kg 1 Weigth Kg μ =,5 μ =,3 μ =, μ =,5 μ =,3 μ =,
26 Dimensional characteritics and weigth Hexagonal plain shaft on motor side and hexagonal shaft with spring on free end Ref. C-71 or Ref. C-81 Speed code Dimension (B) Tube length (L) / 55 or Ref. C-71 Ref. C-81 Speed code Dimension (B) Tube length (L) / 55 WEIGHT / STATIC LOAD / AXIAL FORCE Tube length m/min 2,7 2,9 3, 3,2 3,4 3,5 Weigth 25 m/min 2,5 2,7 2,8 3, 3,2 3,3 (Kg) 55 m/min 2,5 2,7 2,9 3, 3,2 3,4 Static max load (kg) Axial force max (N) 29 26
27 Various machining, coating and sleeves are available to insure a proper centering and a good adherence. Tube machined crowned, zinc coated or stainless steel L (mm) C (mm) Ø (mm) d (mm) Tube machined crowned with natural rubber coating / polyurethane, in steel or stainless steel. 3mm Thickness d L (mm) C (mm) Ø (mm) d (mm) D (mm) Tube with centering sleeve, zinc coated or stainless steel. l Thickness (mm) L (mm) Ø (mm) D (mm) l (mm) /4 L 1/4 L 27
28 8 - MOUNTING ON THE FRAMES Mounting plate for plain 11.1 mm hexagonal shaft - FLAT ON TOP Conveyor with hole Ø12,1mm Reference Plate A-71-G Plate Reference C-71 Mounting plate for plain 11.1 mm hexagonal shaft - ANGLE ON TOP Conveyor with hole Ø12,1mm Reference Plate A-81-G Plate Reference C-81 28
29 Mounting plate for threaded hexagonal shaft - FLAT ON TOP Conveyor with hole Ø12,1mm Claw plate Nut Reference P-B1 Mounting plate for threaded hexagonal shaft - ANGLE ON TOP Conveyor with hole Ø12,1mm Claw plate Nut Reference P-C1 Conveyor with holes ø8,4mm Reference Bolt SP-M
30 9 - WIRING With CB16BP circuit board The circuit board controls and protects the brushless motorized roller. With HB51BP circuit board Towards another HB51 motor control PLC 24 VDC Towards another HB51 circuit board The circuit board controls the motorized roller and manages the zones to ensure ZPA (zero pressure accumulation) 3
31 1 - ACCESSORIES Ribbed belt Pitch Pitch Pitch between the rollers (mm) For pulley Ø43mm Number of teeth Load to be conveyed Load to be conveyed Load to be conveyed Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ27-43 Ref. 3PJ27-43 Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ29-43 Ref. 3PJ29-43 Ref. 4PJ Ref. 2PJ32-43 Ref. 3PJ32-43 Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ57-43 Ref. 3PJ57-43 Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Extension cables Length 1mm [.39"] 32.5mm [1.28"] 37mm [1.46"] 1 Pin Male M-F-EXT-1 PIN-LENGTH (MM) 1 Pin Female 6mm [2.36"] Lenght 12mm 27mm Part number of the extension cable 31
32 Rounded belts Pitch Pitch Pitch between the rollers 75mm 1mm Belt reference 24 VDC power supply Reference Input Output Power Start-up boost CT V-1A 24W 12% 38~48V QT V-2A 48W 15% 3 ph QT V-4A 96W 15% - Very weak inrush current. 24 VDC distribution connector poles with markings «24V / OV» - 4 connectors per pole - Cable.5-4.mm (AWG...) Circuit board Reference Connector PD-2P Zone power cable Mains power supply 24VDC Ref. PD-2P Distribution connector 24VDC Power cable between zones 32
33 TOH D NK PM5 558BGSC1 1/ P54 24VDC 55m/mn S PRODUCT IDENTIFICATION Round label 1 1 Product reference number Month and year of manufacture Serial number 5 Power supply 3 6 Speed Operation Square label Product reference number Month and year of manufacture Serial number Power supply 6 7 Nominal intensity Absorbed power 8 Speed 7 Operation 1 B GSC1 Serie Speed code Tube lenght (L) Brake 33
34 ANNEX 1 INCORPORATION DECLARATION in accordance with the EC Machinery Directive 26/42/EC, Annex II B The manufacturer: Asazuma-Cho, Kasai, Hyogo Japan Distributed in Europe by : hereby declares that the product series : PM5FE-B MOTORIZED ROLLER requirements of this Directive. Commissioning is prohibited until the whole machine/system in which it is incorporated is declared to be in compliance with the EC Machinery Directive Asazuma-Cho, Kasai, Hyogo Japan EC Directives applied : 34
35 ITOH DENKI EUROPE S.A.S. 49 Av. des Jourdies info@itoh-denki.com SUCCURSALE ITOH DENKI ANGLETERRE Suite 1 Trinity Space Centre Waldorf Way info@itoh-denki.com 35 SUCCURSALE ITOH DENKI ALLEMAGNE Neumeyerstrabe 48 info@itoh-denki.de
PM500FE SERIE TECHNICAL DOCUMENTATION
SUMMARY 1 - Presentation of the PowerMoller product range Page 3 2 - Presentation of the series Page 4 General characteristics Structure and description Applications Characteristics depending on circuit
PM605FE SERIE TECHNICAL DOCUMENTATION
SUMMARY 1 - Presentation of the PowerMoller product range Page 3 2 - Presentation of the series Page 4 General characteristics Structure and description Applications Characteristics depending on circuit
PM500FE SERIE IP65 TECHNICAL DOCUMENTATION
SUMMARY 1 - Presentation of the PowerMoller product range Page 3 2 - Presentation of the series Page 4 General characteristics Structure and description Applications Characteristics depending on circuit
PM500XE SERIE TECHNICAL DOCUMENTATION
SUMMARY 1 - Presentation of the PowerMoller product range Page 3 2 - Presentation of the series Page 4 General characteristics Structure and description Applications 3 - Transfer capacity Page 8 Ribbed
PM500XK SERIES TECHNICAL DOCUMENTATION
SUMMARY 1 - Presentation of the PowerMoller product range Page 3 2 - Presentation of the series Page 4 Structure and description Applications General characteristics 3 - Transfer capacity Page 8 Ribbed
PM500VE SERIE TECHNICAL DOCUMENTATION
SUMMARY 1 - Presentation of the PowerMoller product range Page 3 2 - Presentation of the series Page 4 General characteristics Structure and description Applications General characteristics with IB-P circuit
Company. Pioneer, developer and leader in motorized roller. Europe. Japan U.S.A. Asia
Company Pioneer, developer and leader in motorized roller During the last 70 years ITOH DENKI has become recognized throughout the world for the design, manufacture and marketing of motorized rollers and
Built-in ZPA Logic Hybrid Driver Card No. HB-508S
Built-in ZPA Logic Hybrid Driver Card No. HB-508S HB-508S is the new generation of Built-in ZPA Logic Hybrid Driver Card. The HB-508S has both slug (train) tote release mode and singulated tote release
INTERROLL 24VDC PRODUCTS ROLLERDRIVES & DRIVECONTROL CARD
P PRODUCT R O D U C T I NINFORMATION F O R M A T I O N INTERROLL 24VDC PRODUCTS ROLLERDRIVES & DRIVECONTROL CARD INTERROLL EC100 24VDC ROLLERDRIVE Product Features Wide speed range Multiple drive options
Latest News ECDriveS 24 V drive system for roller conveyors
Drive Technology \ Drive Automation \ System Integration \ Services Latest News ECDriveS 24 V drive system for roller conveyors Current status 04/2017 23484055 / EN Table of contents Table of contents
CBM-105FN/FP Circuit Board
CBM-105FN/FP Circuit Board Features Adjustable acceleration and deceleration time (0 to 2.5s) Stable speed operation Manual or automatic recovery of the thermal overload device One (1) rotary switch to
Flat-Right Angle Transfer
F-RAT-S User Manual Flat-Right Angle Transfer Thank you for purchasing Flat Right Angle Transfer unit. Before using the product, carefully read this manual and retain it for future reference. Make sure
Innovation driver. Designed and made in FRANCE. Drum motors catalog for Conveyors.
Innovation driver Designed and made in FRANCE Drum motors catalog for Conveyors www.sirem.fr Motorized drum for the conveying by SIREM The belt conveyor is a handling or carrying device for the transportation
Flat-Right Angle Transfer
F-RAT-S User Manual Flat-Right Angle Transfer Thank you for purchasing Flat Right Angle Transfer unit. INDEX 1. 2. 3. 4. 5. 6. 7. 8. Important safeguards P1 Product designation P2 Structure P2 Power P2
. DC Model Rollers. Hybrid Card. 2-Zone Controller. AC Model Rollers. Transfers
Features and Solutions... Selecting a Moller... 4-6. DC Model Rollers PM0HS... 7 PM486FE... 8-9 PM486FS... 10-11 PM486FP... 1-1 PM486FH... 14 PM486LD... 15 PM486XE/XP... 16-17 PM570FE... 18-19 PM570KE/KT...
Checkout motorized drums catalog
Innovation driver Designed and made in FRANCE Checkout motorized drums catalog www.sirem.fr Motorized drums for Checkout by SIREM The supermarket checkouts are carefully designed so as to enhance the comfort
POWER MOLLER. The Modern Approach to Conveyor Motorization
ITOH DENKI, USA POWER MOLLER POWER MOLLER The Modern Approach to Conveyor Motorization 135 Stewart Road Hanover Industrial Estates Wilkes-Barre, Pennsylvania 18706-1462 Telephone: 570-820-8811 Facsimile:
Linear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46
Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS
CB-005N Circuit Board
CB-005N Circuit Board Provides Thermal Protection for board and motor Built-in current limiter Error Output signal for self diagnosis Dynamic brake control Variable speed (0% - 100%) by onboard potentiometer
DRUM MOTOR 113LP 113.5Ø 0.06kW kW, with planetary gearbox in polymer or polymer / steel combination for non-continuous operation
16 DRUM MOTOR UNIT HANDLING DRUM MOTOR 11LP 11.5Ø 0.06kW - 0.7kW, with planetary gearbox Product description This Pulley is the ideal operator for light and medium conveyors, for non-continuous use. Characteristics
F-RAT-S300 Serie. User manual
F-RAT-S300 Serie User manual Summary 1. Safety instructions and regulations 3 2. Precautions to be taken during handling 3 3. Product presentation 4 4. Product identification 4 5. Mechanical installation
Linear Actuator with Toothed Belt Series OSP-E..B
Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7
Index. Purchase guide. Belt conveyor. Elevator Belt conveyor. Modular belt conveyor. Stainless steel belt & slat chain conveyor. Accessories & options
belts SOMEFI is a company dedicated to the manufacture and sale of conveyors and modular handling equipment. For more than 40 years SOMEFI has offered a complete range of industrial conveyors, of flexible
At Dyno we make the world of business go round. Up and down. And side to side.
Roller Catalogue 2017 SECTION At Dyno we make the world of business go round. Up and down. And side to side. Our conveyors make moving meat, veges, fruit, packages, gravel, and even luge sleds simple and
Urethane. Ralphs-Pugh Urethane Products
Ralphs-Pugh Products elastomers are unique because they combine many of the advantages of rigid plastics, metals and ceramics with the elasticity of rubber. resists abrasion and reduces the affects of
ROLLERS SERIES 3500 Fixed drive conveyor roller. ROLLERS SERIES 3500 Fixed drive conveyor roller. Technical data
Application area Driven unit handling conveying, such as transport of cardboards, containers, barrels or tires. Low-noise The use of polyamide drive heads results in very quiet running. Lateral loading
ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS
ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES 1 ELECTRIC AXIS - RODLESS ELEKTRO SK SERIES Electric axis without screw piston rod, with V-Lock interface. The cylinder frame is made of anodized extruded
Pilot-Operated Proportional DC Valve Series D*1FH
Characteristics The pilot-operated proportional DC valves series of the D*1FH series are high-performance valves with electronic spool position feedback. These valves are available in sizes NG10 to NG2
Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD
Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17
Planning Section. Environmental conditions. Different power supply. Industrial solutions
Planning Section 86 89 Environmental conditions Different power supply 90 Industrial solutions 91 Power calculation and selection of the Motorized Pulley for package transportation 93 Oil types and contents
Sizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
Motorized Pulley 80LS A very compact strong drive for small high use conveyors
Product description This Motorized Pulley is perfect for high torque applications with limited space or access. Characteristics Applications Salt water resistant aluminum bearing housings Small conveyors
Transmotec PLANETARY GEAR DC MOTORS PLANETARY GEAR MOTORS. Transmotec. 43 mm to Ø123 mm 12 W to 421 W.
Transmotec PLANETARY GEAR MTRS PLANETARY GEAR DC MTRS mm to Ø123 mm 12 W to 421 W Transmotec www.transmotec.com Phone: +46 8 792 35 30 Fax: +46 8 792 35 20 e-mail: inquiry@transmotec.com Page 1 Rev. 2018
www.pulseroller.com sales@pulseroller.com support@pulseroller.com www.pulseroller.com/contact PRODUCT CATALOG [The information contained in this catalog is subject to change without notice.] 480109YUR(.7.017)
Driver Card. ZPA Hybrid driver card. Standard Accessories. Option. Built-in *ZPA logic for avoiding collisions between transferred loads
Driver Card ZPA Hybrid driver card Conformity Conformity Applicable MDR models Driver model CAUTION tandard Accessories Option Built-in *ZPA logic for avoiding collisions between transferred loads Multiple
A5 BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK
BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK Belt-driven rodless electric axis with a V-Lock interface. The structure features an extremely lightweight yet high-strength anodised aluminium extruded
Online data sheet. DBS60E-S4EP05000 DBS60 Core INCREMENTAL ENCODERS
Online data sheet DBS60ES4EP05000 DBS60 Core DBS60ES4EP05000 DBS60 Core A B C D E F Ordering information Type Part no. DBS60ES4EP05000 1071649 Other models and accessories www.sick.com/dbs60_core Illustration
Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
index Megadyne PV-belts 2 Belt features and structure 3 Belt cross sections and dimensions 4 Pulleys 5 Standard belt range 6 Symbols, units, terms 8
pv-belts index Megadyne PV-belts 2 Belt features and structure 3 Belt cross sections and dimensions 4 Pulleys 5 Standard belt range 6 Symbols, units, terms 8 Drive calculation procedure 9 Table 8: performance
Contents. Part no.: MLC500T Safety light curtain transmitter
Part no.: 68000315 MLC500T30-1500 Safety light curtain transmitter Figure can vary Contents Technical data Suitable receivers Dimensioned drawings Electrical connection Circuit diagrams Operation and display
1 ED. UNIT EN 02/2018 RULMECA DRIVE ROLLERS SERIES BL3. Moving ahead.
1 ED. UNIT EN 02/2018 RULMECA DRIVE ROLLERS SERIES BL3 Moving ahead. RDR DRIVE ROLLERS SERIES BL3 Moving ahead. Rulmeca - Moving ahead. Since its foundation in 1962, the Rulmeca Group, headquartered
CPLab / CP Factory. Application module magazine. Data sheets
CPLab / CP Factory Application module magazine Data sheets Data sheet: Push-in fitting QSM-M5-4 #153304 Size Mini Nominal size 2.2 mm Type of seal on screw-in stud Sealing ring Container size 10 Design
6.2. Conveyor Sensor Systems. 200 Series Zero Pressure Accumulation. 200 Series Zero Pressure Accumulation
.2 Conveyor Systems Contents Description Product Overview...................... Product Selection Basic and Progressive Logic s..... Standard s.................... Accessories...........................
Green Power 2.0 MASTERYS GP
Green Power 2.0 MASTERYS GP 60 to 120 kva/kw OBJECTIVES The aim of these specifications is to provide: the information required to choose the right uninterruptible power supply for a specific application.
UTA STANDARD. Ductable units. Range. Air handling unit with high available static pressure. NEW Eco-Design Filter. V3000 control Fresh air management
Ductable units NEW Eco-Design Filter Air handling unit with high available static pressure V3000 control Fresh air management The range of air handling units is designed for suspended ceiling heating and
Belt Conveyor System. The Just-in-Time (JIT)
24 8 The Just-in-Time (JIT) Belt Conveyor System Success is often measured by efficiency and speed. For Robotunits customers this means always keeping one step ahead regarding the time required for delivery,
MOONS SM servo motors offer a great combination of Power, Precision and Value:
MOONS SM Series of servo motors has been expanded and improved. The SM Series now includes a variety of standard windings, more feedback options, and more connection options. Some ratings have increased,
LONG LENGTH DESIGN MANUAL CONTENTS PAGE. Introduction Long Length features & benefits... 2 Long Length belting programme... 7
DESIGN MANUAL LONG CONTENTS PAGE LENGTH Introduction Long Length features & benefits... 2 Long Length belting programme... 7 Drive Design Belt drive selection procedure... 8 Belt pitch selection guides...
MELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c
MELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c Voltage output The K7 Performance Level c series of Gefran are pressure transmitters for using in high temperature environment. The main characteristic
SERIES PR90H PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS REFERENCE PR90H - C C - C. External diameter 58 mm
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552 ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552 1 2 SUMMARY P ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552 PAGE 4 P ELECTRIC MOTORS PAGE 15 P DRIVES FOR STEPPING MOTORS
KTR Torque Limiters Overload Protection Systems
KT Torque Limiters Overload Protection Systems UFLEX - Friction Disk - Zero Backlash Ball Detent KT SI - Ball/oller Bearing Style KT SI Compact - Zero Backlash Ball Detent Catalog Contents (Metric) Page
catalogue Endless handling solutions CATALOGUE EDITION AU 04 AUTOMOTIVE MATERIALS HANDLINGS DRIVE AND DRIVEN ROLLERS
au Endless handling catalogue solutions CATALOGUE EDITION AU 04 AUTOMOTIVE MATERIALS HANDLINGS DRIVE AND DRIVEN ROLLERS INDEX DUGOMRULLI HISTORY 3 PRODUCT RANGE 5 AUTOMOTIVE ROLLER SOLUTIONS 7 COATED PALLET
Limit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66
Limit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66 Double Insulation (for thermoplastic type) High mechanical resistant Degree of protection IP65 (thermoplastic) IP66
3242 G 024 BX4 CS/CC 24 3,6 18,2 77,3 1,6 / 12,4 9 / ball bearings, preloaded 0,015. stainless steel 370 electronically reversible
Brushless DC-Servomotor with integrated Motion Controller and or CN interface 6 mnm For combination with Gearheads: 3/1, 32, 32/3, 32/3 S, 38/1, 38/1 S, 38/2, 38/2 S 3242... BX4 CS/CC 1 2 3 4 Nominal voltage
MELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c
MELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c Voltage output The K7 Performance Level c series of Gefran are pressure transmitters for using in high temperature environment. The main characteristic
(1,5 modules per pole)
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 DX 3 MCB 36kA, 80A CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
EB Conveyor Maintenance Guide
EB Conveyor Maintenance Guide EN-0037 Rev A EB Conveyor Maintenance Guide www.qdraw.com Table of Contents Overview Page 3 Exploded View Of A Standard EB Conveyor Page 4 Preventative Maintenance Page 5
2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
Continuous level measuring system NB 3000 Selection list. Overview
Table of contents Page Overview P2 ------------------------------------------------------------------------------------------------------------------- Specifications P3 -------------------------------------------------------------------------------------------------------------------
ATyS d M Remotely operated Transfer Switching Equipment from 40 to 160 A
ATyS d M Remotely operated Transfer Switching Equipment Transfer switches new The solution for > Applications with an external ATS/AMF controller > Building Management Systems (BMS) atys-md_002_b_1_cat
RACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
C-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS
C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence: about
Lexium integrated drives
Description ILp for DeviceNet, EtherCAT, Modbus TCP, ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for DeviceNet, EtherCAT, Modbus TCP or and a brushless
Easy Slide Rails ov -easy_slide_divider - U pdated
Easy Slide Rails ov-easy_slide_divider - Updated - 18-09-2017 163 Easy Slide Rails Easy Slide Rails Introduction The Easy Slide family of linear rails have a compact cross-section and low-friction movement.
Belt Conveyors GUF-P MINI
Belt Conveyors GUF-P MINI Conveyor frame profiles mk 2075 mk 2100 mk 2150 22 The minimal install height, as well as the lower walls for direct placement of the conveyor on the machine bed, are ideal for
Belt Driven. Conveyors (989) Roller Conveyors Belt Driven Live. Roller Conveyors
Belt Driven Live Conveyors Conveyors - 195 - Light Duty Transportation Type... 196 Minimum Pressure Accumulation Type... 198 Medium Duty Transportation Type... 200 Heavy Duty Transportation Type... 202
Guide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
Limit Switch - Prewired Type Metal Body
Limit Switch - Prewired Type Metal Body Sealed with epoxy resin al the base of the box Degree of protection IP67 Thermoplastic material or diecast zinc alloy body Positive Opening Operation Minimum Actuation
User manual Interroll RollerDrive EC310
User manual Interroll RollerDrive EC310 Chapter-ID: User manual Chapter-ID: Version Chapter-ID: Translation of the original instructions Manufacturer's address Interroll Engineering GmbH Hoeferhof 16 D-42929
Spartec CONVEYORS DESIGN MANUFACTURE INSTALLATION CONVEYORS
DESIGN MANUFACTURE INSTALLATION PARTS SCRAP PACKAGE BULK HANDLING LOW PROFILE DIE-VEYORS 2 Frame Heavy Duty BELT WIDTH + 1 1/2" 3/4" BELT WIDTH 3/4" 2" 1" BELT WIDTH + 3/4" SECTION VIEW WIDTHS: 2 Thru
RACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
BEARINGS FOR RAILWAY APPLICATIONS
BEARINGS FOR RAILWAY APPLICATIONS BEARINGS FOR RAILWAY APPLICATIONS The railway industry is a promising field world-wide. ZKL therefore dedicates special attention to the bearings for rail vehicles. The
LS Series Limit Switches. Short Form Catalogue AC1300 ABB
Short Form Catalogue LS Series Limit Switches AC ABB LS Series Limit Switches Foot Switches Contents Panorama... 2 Limit Switches - Plastic Casing and Metal Casing... 12 Safety Limit Switches - Plastic
AEROSPACE BEARINGS. Plain Bearings. Self-Lubricated Journal Bearings Descriptions. Spherical Bearings Descriptions
Plain Bearings AEROSPACE BEARINGS Self-Lubricated Journal Bearings Descriptions Spherical Bearings Descriptions Self-Lubricated Rod Ends Descriptions SELF-LUBRICATED JOURNAL BEARINGS STRAIGHT ALUMINIUM
The new performance class...
The new performance class... 10/2017 EP(X)-II 30/40 EP(X)-II 30/40 twin tube actuator The latest generation of twin tube units Move-Tec EP(X)-II 30/40 Your application takes centre stage slow langsam A
contents about the range
contents Overview 3 Motor data PBL42 4 PBL60 5 PBL86 6 Technical information 7 Controller data S controller 9 N and B controllers 10 50B controller 12 EMC Directive compliance 13 Geared motors PBL42 motor
Customizations include: Customized harness. Shaft configuration. Winding configuration. And more... Ø mm W. TRANSMOTEC
Planetary gear dc motors gear dc motors Planetary Ø - 123 mm 12-421W Transmotec sell a broad range of geared DC motors in standard and customized configurations. ur motors are often available with gear
XR Conveyor Maintenance Guide
XR Conveyor Maintenance Guide EN-0035 Rev. A XR Conveyor Maintenance Guide www.qdraw.com Table of Contents 05/20/2009 Overview Page 3 XR Conveyor Assembly Page 4 General Information Exploded View of an
KMH KMH500/630/800 HORIZONTAL MACHINING CENTERS
KMH KMH5/63/8 HORIZONTAL MACHINING CENTERS Index Cover 1 Cover Contents 2-3 Table of Contents Structure 4-5 Design & Rigidity 6 3 Axis Transmission 7 Ballscrew Cooling System 8-9 ATC Unit Maintenance &
Lexium integrated drives
Description ILp for CANopen, PROFIBUS DP, RS ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for CANopen DS, PROFIBUS DP or RS and a brushless DC motor.
Timing Belts
Timing Belts www.medway-uk.com 1 Timing Belts Imperial Product Description The MEDWAY classical timing belt (synchronous) has a trapezoidal tooth profile providing a positive drive by the meshing of belt
Design & Selection. Installation & Adjustment
U SM Series WRNING This product must not be used submerged in water, oil or powder, or where coolant, coolant fluid or swarf, etc., may come in contact. lways incorporate an interlock in the control circuit
1/4 turn ACTELEC SG05.1 to SG12.1 (AUMA)
Type series booklet 8521.14/3--10 1/4 turn ACTELEC SG05.1 to SG12.1 Direct 1/4 turn electric actuators ACTELEC AUMA SG05.1 - SG07.1 - SG10.1 - SG12.1 Output torques up to 1200 Nm Applications All sectors
Linear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
CPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm
95 Nm to 2900 Nm Introduction The range of IP23 protection CPLS asynchronous motors was designed for fixed and variable speed applications when there is little space available or (and) there is a wide
Dr. TRETTER AG. Tolerance Rings. safe cost-effective fast assembly
Dr. TRETTER AG Tolerance Rings safe cost-effective fast assembly Tolerance Rings are corrugated metal strips manufactured of high quality spring steel. Tolerance Rings are a fastening device between two
THE TABLE OF CONTENTS
ROLLER CATALOG THE TABLE OF CONTENTS General Information Page Sizes and 2 Retention and 2 Construction 2 Bearing Features and Lubrication 2 Sprocket Information 2 Groove Information 3 Load Capacity Reference
Actuator LA31. Data sheet LINAK.COM/MEDLINE-CARELINE
Actuator LA31 Data sheet LINAK.COM/MEDLINE-CARELINE LA31 The LA31 is a compact, quiet and powerful actuator designed for a variety of applications in the MEDLINE & CARELINE segment, such as hospital beds,
Metal limit switches are made of zinc alloy and have a degree of protection of IP67 and NEMA Type 4, 4X.
Limit switches pre-wired 3mm & 35mm Metal & plastic casings Limit switches Description Plastic are made of reinforced UL-VO thermoplastic fiberglass, offering double insulation and protection
USER-PROGRAMMABLE AND ROBUST
NC FREELY PROGRAMMABLE ROTARY TABLES NC ROTARY TABLE NC ROTARY TABLE: USER-PROGRAMMABLE AND ROBUST OPTIMISED BEARINGS To achieve maximum quality and reliability, even when under load, all roller bearings
Contents. Part no.: MLC510R Safety light curtain receiver
Part no.: 68001315 MLC510R30-1500 Safety light curtain receiver Figure can vary Contents Technical data Suitable transmitters Dimensioned drawings Electrical connection Circuit diagrams Operation and display
VARIODRIVE 3-phase external rotor motor. VARIODRIVE technical information VARIODRIVE
27.05.20 0: Seite Information Antriebstechnik_20_05_27_Finale_EN_:Vorlage VarioDrive C ECI motor 5 AC motors VARIODRIVE -phase external rotor motor Specifications 4 Representatives VARIODRIVE technical
Features. Description. Table of Contents
Features Very low profile Very high efficiency (typically 90%) Single and dual output versions Input voltages from 24V to 110VDC nominal voltages from 5V to 48VDC -40 C to +71 C operation without de-rating
AF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts
AF4... AF96 -pole contactors to 6 hp at 48 V AC AC / DC operated with N.O. N.C. auxiliary contacts Description AF4... AF96 contactors are mainly used for controlling -phase motors and power circuits up
Engineering Manual Multidirectional Roller Top Belt Series 2253RT
Engineering Manual Multidirectional Roller Top Belt Series 2253RT 1Chains 1 0& sprockets 5 0Wear 5strips 5 3accessories 3 0 0 5return 1 0systems 5 4supports 0 5 Curves 0 0& 0tracks 5 a Side 5 1guide 5
AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals
AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals 25 to 55 A culus CE Application AF09... AF38 4-pole contactors are used for controlling power circuits up to 600 V AC and 240 V DC.
TECHNICAL. AVAILABLE UPON REqUEST CHAPTER CONTENTS. Optical comparator: For process control during serial production.
TECHNICAL INFORmATION INFORmATION ABOUT CV / RE AVAILABLE UPON REqUEST Optical comparator: For process control during serial production. Engineering: Development and design using the latest CAD systems.
MGX. 2-jaw parallel self-centering pneumatic gripper series MGX. Parallel grippers. Pinze parallele MGX
Pinze parallele MGX Parallel grippers MGX 2-jaw parallel self-centering pneumatic gripper series MGX Flat profile. Robust guide. High gripping force. Small weight and dimensions. High dimensional accuracy.
BUTTERFLY VALVES + NA ELECTRIC ACTUATOR
1150-1158 BUTTERFLY VALVES + NA ELECTRIC ACTUATOR CHARACTERISTICS The butterfly valves 1150 to 1158 are dedicated to the automatic opening/shut-off of various fluid pipes. It has a ductile iron body. Thanks