PM500FE SERIE IP65 TECHNICAL DOCUMENTATION
|
|
|
- Toby Dalton
- 5 years ago
- Views:
Transcription
1
2 SUMMARY 1 - Presentation of the PowerMoller product range Page Presentation of the series Page 4 General characteristics Structure and description Applications Characteristics depending on circuit board 3 - Transfer capacity Page 9 Ribbed belt drive Stopping distance according to the weight and type of load being conveyed 5 - Dimensional characteristics Page 13 Grooved tube - M8 threaded shaft with screw on free end Roller with pulley for ribbed belt- M8 threaded shaft with screw on free end Roller without drive - M8 threaded shaft with screw on free end 6 - Dimensional characteristics - curve Page 19 Conical roller with grooved tube - Ri = 800mm Conical roller with pulley for ribbed belt - Ri = 800mm Conical roller with grooved tube - Ri = 850mm Conical roller with pulley for ribbed belt - Ri = 850mm 7 - Dimensional characteristics - miscellaneous Page 23 PVC sleeve Coated in natural rubber, nitrile rubber and polyurethane Crowned machining 8 - Belt conveyor application Page 24 Condition of use and recommendation Structure Transfer capacity Dimensional characteristics and weigth 9 - Mounting on the frames Page Wiring Page 31 With CBM-105 circuit board With HB510 circuit board 11 - Accessories Page 32 Ribbed belts Rounded belts 24 VDC power supply 24 VDC distribution connector Round label Square label 2
3 1 - PRESENTATION OF THE POWER MOLLER PRODUCT RANGE Standard circuit board DC Brushless 90 transfer CB018 CB016 CB016B F-RAT-S HBR-605 CBM-105 CBR-306 CB transfer CBM-105 External circuit board Integrated circuit board POP-UP CBM-105 CBR-306 ZPA circuit board Ø32 Ø50 HB510 HBK-608 HB510B PM320 HS Ø50 CB018 PM500 ME PM500 XE B&W AS-i 3.0 Wenglor Molex B&W AS-i 3.0 Wenglor Molex Module circuit board PM500 FE PM500 VE CBM-105 HB510 IB-E IB-P PM500 XP PM500 XK B&W AS-i 3.0 Wenglor Molex PEPPERL-FUCHS AS-Interface HBR-605 CBR-306 PM500 FE-B CB016B HB510B PM500 XC PEPPERL-FUCHS AS-Interface Ø60,5 Ø60,5 Network controller PM605 FE CBM-105 HB510 IB-E PM605 XE B&W AS-i 3.0 Wenglor IB-E PM605 VE IB-P PM605 XP B&W AS-i 3.0 Wenglor Molex IB-P PM605 FE-B CB016B HB510B Corresponding circuit board PM605 KT CB030 HBK-608 Compatible module / sensor Max load to be conveyed 3 Mechanical brake version
4 2 - PRESENTATION OF THE SERIES 24VDC, used with circuit board CBM-105 or HB510 is designed for conveying light and medium loads for order preparation, distribution, and for assembly lines. This circuit board is separated from the gear-motor in order to optimize the performance, durability of the roller and to offer diverse functions such as pulse signals, acceleration/deceleration, optional position holder... The assembly can be controlled by PLC. General characteristics ELECTROMECANICAL CONTROL Direct current and brushless 24 VDC 24 VDC (+ /- 10 %) ripple ratio < 10 % Isolation class E Continuous 100% Operation at 40 C Intermittent Brake Dynamic braking Protection index (cold room, contact us) Cable length 1000 mm with JST connector - 9 pins Protection Thermal protection (>95 C for circuit board, >110 C for motor) Protection against induced voltage Environment - Vibrations < 0,5 G Sound level Speed code Reduction ratio 1/44,90 1/26,67 1/12,64 1/7,5 Connector Male 9-pin JST#S9B-XH-A Circuit board functions See the characteristics of CBM-105 (page 7) and HB510 (page 8) The PM500FE drive roller is designed exclusively for indoor use. 4
5 motor side : Heat-treated stainless steel shaft free side : Ø 15 mm, Heat-treated stainless steel shaft Set screw Tube : Zinc plated steel Tube in precision cold drawn steel, ST37-2 quality, outer diam. 50 mm Zinc-coated or stainless steel (304L) MECANICHAL Pulleys : Stainless steel Ribbed Pulleys for ribbed belts,8 teeth, stainless steel with plain Ø 15 mm, Ribbed Grooves : Grooves Grooves in different positions Depth 5,2mm for stainless steel tube and 5,8mm for zinc plated steel Ø 4 or 5 mm Sleeve : Tapered Conical PVC sleeve (PP) for inner radius (Ri) 800 or 850 mm Grey/black PVC sleeve thickness 2 or 3 mm (58 ShA) PVC Lagging : Polyurethane Polymerized polyurethane coating, thickness 3 mm, 90 ShA, grey Natural rubber / nitrile Natural hot vulcanized rubber coating, thickness 3 mm, 60~65 Sha 5
6 Structure and description O-ring Tube O-ring Shaft at free end 303L Shaft at motor end 303L Lip seals Lip seals Applications STOP STOP Zero pressure accumulation (ZPA) 90 transfer Curve Cold room Gate Acceleration / Decelaration Bifurcation / Merge STOP STOP ON OFF Length measurement Stopping distance controlled by pulsed signal (CBM-105) Position holding Jogging (lateral alignment) 6
7 Characteristics depending on circuit board WITH CBM-105 E LECTROMECHANIC C ONTROL Motor CHARACTERISTICS SPEED CODE 15 SPEED CODE 25 SPEED CODE 55 SPEED CODE 90 Absorbed power (W) Tangential force (N) Operation Brake Direct current and brushless 24 VDC nominal 25-67,2 28,8-64,8 start-up 96 nominal 133,9-143, , ,9-27,9 start-up 349, ,8 62,7 Dynamic braking no load 2,2-17,4 3,7-29,3 7,7-61,7 13,0-104,0 Speed (m/min) nominal 2,2-13,3 3,7-25,4 7,7-47,3 13,0-94,0 IP54, 55, 65 (Contact us for other classes) Lenght 285 to 1200 mm 260 to 1200 mm 260 to 1200 mm 225 to 1200 mm mm = kg per roller Input signal Selection of rotation direction Start / Stop, Direction of rotation By dip switch (CW/CCW) or input signal 20 speeds with a rotating switch Speed setting Acceleration / Deceleration Adjustable with potentiometer from 0 to 2,5s Servo-brake activation Pulse signal output (imp./tour) 89,9 53,34 25,28 15 Error signal out-put Over-heating, wiring error, under-voltage, over-voltage... Protection Against polarity reversal 0/24V and power backfeed, fuse, integrated thermal protection 7
8 E LECTROMECHANIC WITH HB510 CHARACTERISTICS SPEED CODE 15 SPEED CODE 25 SPEED CODE 55 SPEED CODE 90 Motor Direct current and brushless 24 VDC Absorbed power (W) nominal 29, ,8-61,9 29, ,8-61,9 start-up 96 Tangential force (N) nominal 118,6-127,1 67,7-75,0 37,9-40,6 21,5-24,0 start-up 349,8 225,5 111,8 72,2 Operation Brake Dynamic braking Nominal speed (m/min) no load 4,3-17,4 7,3-29,3 15,4-61,7 26,0-104,0 nominal 4,3-13,9 7,3-26,3 15,4-49,4 26,0-93,6 IP54, 65, cold room (Contact us for other classes) Lenght 285 to 1200 mm 260 to 1200 mm 260 to 1200 mm 230 to 1200 mm mm = kg per roller Speed setting Error signal in-put Sensor output signal Protection 10 speeds with a rotating switch Over-heating, wiring error, under-voltage, over-voltage... Recovery sensor state for PLC Against polarity reversal 0/24V and power backfeed, fuse, integrated thermal protection C ONTROL Sensor timer Run holding timer Jam timer Emergency stop Transfer mode Transfer direction and logic Synchronization function Speed control block area Timing sequence of the motorized roller depending on the sensor status of the downstream zone Timing sequence of the motorized roller depending on the sensor status of the zone to be left Jam/blockage detection of the load depending on the sensor status time Selection of train mode or singulation mode by dip switch Synchronization of several motorized rollers in the same zone The forced start enables evacuating the load of the last zone Speed variation simultaneous and synchronized of several motorized rollers Contact us 8
9 3 - TRANSFER CAPACITY Driven by ribbed belts WITH CBM-105 PM500FE 15m/min PM500FE 25m/min Poids Load de weight la charge (kg) (Kg) Duty Facteur cycle de marche (%) (%) Load Poids weight de la charge (kg) (kg) Duty Facteur cycle de marche (%) % Load weight (kg) Poids de la charge (kg) PM500FE 55m/min Duty Facteur cycle de marche (%) % Load to transport 9 slave rollers driven by 1 motorized roller These curves are given as a guide. Transfer capacity depends on the nature and quality of the transported 9
10 WITH HB PM500FE 15m/min 350 PM500FE 25m/min Load Poids weight de la charge (kg) (kg) Load weight (kg) Poids de la charge (kg) Duty cycle (%) Facteur de marche (%) Duty cycle (%) Facteur de marche % Load weight (kg) Poids de la charge (kg) PM500FE 55m/min Duty cycle (%) Facteur de marche % Load to transport 9 slave rollers driven by 1 motorized roller These curves are given as a guide. Transfer capacity depends on the nature and quality of the transported 10
11 Stopping distance according to the weight and type of load being conveyed S Stopping distance 75 mm pitch, 10 free rollers DRIVEN BY ROUND BELTS Ø5MM Stopping distance FE 55m/min - Cardboard box 50m/min 40m/min 30m/min 20m/min 10m/min Kg (Load) Stopping distance 50m/min 40m/min 30m/min 20m/min 10m/min FE 55m/min - Plastic box Kg (Load) DRIVEN BY RIBBED BELTS Stopping distance FE 55m/min - Cardboard box 50m/min 40m/min 30m/min 20m/min 10m/min Kg (Load) Stopping distance FE 55m/min - Plastic box 50m/min 40m/min 30m/min 20m/min 10m/min Kg (Load) The items in this document are indicative. 11
12 4 - PRESENTATION OF THE DIFFERENT FIXING OPTIONS FREE SIDE FIXING MOTOR SIDE FIXING Screw M8 x 14 Ref : SP-M-14-SUS (optional) Ref : Z-071-D / Z-081-D Ref : Z-071-D / Z-081-D (optional) Ref : Z-071-D / Z-081-D Screw M8 x 14 Ref : SP-M-14-SUS (optional) Ref : C-081-D (optional) Ref : C-081-D (optional) Ref : C-081-D (optional) Ref : Z-071-D 2 nuts M5 2 spring washer M5 Ref : Z-081-D 2 nuts M5 2 spring washer M5 Ref. C-081-D 2 spring washer M5 2 nuts M5 12
13 5 - DIMENSIONAL CHARACTERISTICS Grooved tube - Hexagonal shaft with spring on free end PM500FE (50E) Ref. Z-081-D Ref. Z-071-D or Ref. C-081-D Ref. Z-081-D Ref. Z-071-D or Ref. C-081-D STEEL TUBE Speed code Dimensions PM500FE (50E) Grooves for steel tube Dimension (B) Tube lenght (L) Depth = 5.8mm G0 mini G1 mini G2 mini G1+G2 max / STAINLESS STEEL TUBE Speed code Grooves for stainless steel tube Dimension (B) Tube lenght (L) Depth = 5,2mm G0 mini G1 mini G2 mini G1 + G2 max / 55 90! For a single groove G2=0. WEIGHT / STATIC LOAD / AXIAL FORCE Tube length m/min 2,9 3,0 3,2 3,4 3,5 3,7 3,9 4,0 4,2 4,4 Weight 25m/min 2,7 2,8 3,0 3,2 3,3 3,5 3,6 3,8 4,0 4,1 (Kg) 55m/min 2,7 2,9 3,0 3,2 3,4 3,5 3,7 3,8 4,0 4,2 90m/min 2,7 2,9 3,0 3,2 3,4 3,5 3,7 3,8 4,0 4,2 Static load max (kg) Axial force max (N)
14 Grooved tube - M8 threaded shaft with screw on free end PM500FE (50E) Ref. SP-M8-14-SUS 4 Ref. Z-081-D Ref. Z-071-D or Ref. C-081-D STEEL TUBE Speed code Dimensions PM500FE (50E) Grooves for steel tube Dimension (B) Tube lenght (L) Depth = 5.8mm G0 mini G1 mini G2 mini G1+G2 max / STAINLESS STEEL TUBE Speed code Grooves for stainless steel tube Dimension (B) Tube lenght (L) Depth = 5.2mm G0 mini G1 mini G2 mini G1+G2 max / 55 90! For a single groove G2=0. WEIGHT / STATIC LOAD / AXIAL FORCE Tube length m/min 2,9 3,1 3,2 3,4 3,5 3,7 3,9 4,0 4,2 4,4 Weight 25m/min 2,7 2,8 3,0 3,2 3,3 3,5 3,7 3,8 4,0 4,2 (Kg) 55m/min 2,7 2,9 3,0 3,2 3,4 3,5 3,7 3,9 4,0 4,2 90m/min 2,7 2,9 3,0 3,2 3,4 3,5 3,7 3,9 4,0 4,2 Static load max (kg) Axial force max (N)
15 Roller with pulley for ribbed belt - Hexagonal shaft with spring on free end PM500FE (50E) 1000 Ref. Z-081-D Ref. Z-071-D or Ref. C-081-D Ref. Z-081-D Ref. Z-071-D or Ref. C-081-D Speed code Dimension (B) Dimensions PM500FE (50E) Tube lenght (L) / WEIGHT / STATIC LOAD / AXIAL FORCE Tube length m/min 3,1 3,2 3,4 3,6 3,7 3,9 4,1 4,2 4,4 4,6 Weight 25m/min 2,9 3,0 3,2 3,4 3,5 3,7 3,9 4,0 4,2 4,4 (Kg) 55m/min 2,9 3,1 3,2 3,4 3,6 3,7 3,9 4,1 4,2 4,4 90m/min 2,9 3,1 3,2 3,4 3,6 3,7 3,9 4,1 4,2 4,4 Static load max (kg) Axial force max (N)
16 Roller with pulley for ribbed belt - M8 threaded shaft with screw on free end PM500FE (50E) L=B Ref. SP-M8-14-SUS 4 Ref. Z-081-D Ref. Z-071-D or Ref. C-081-D Speed code Dimension (B) Dimensions PM500FE (50E) Tube lenght (L) / WEIGHT / STATIC LOAD / AXIAL FORCE Tube length m/min 3,1 3,2 3,4 3,6 3,7 3,9 4,0 4,2 4,4 4,5 Weight 25m/min 2,8 3,0 3,2 3,3 3,5 3,7 3,8 4,0 4,2 4,3 (Kg) 55m/min 2,9 3,1 3,2 3,4 3,5 3,7 3,9 4,0 4,2 4,4 90m/min 2,9 3,1 3,2 3,4 3,5 3,7 3,9 4,0 4,2 4,4 Static load max (kg) Axial force max (N)
17 Roller without drive - Hexagonal shaft with spring on free end PM500FE (50E) 1000 Ref. Z-081-D Ref. Z-071-D or Ref. C-081-D Ref. Z-081-D Ref. Z-071-D or Ref. C-081-D Speed code Dimension (B) Dimensions PM500FE (50E) Tube lenght (L) / WEIGHT / STATIC LOAD / AXIAL FORCE Tube length m/min 2,9 3,0 3,2 3,4 3,5 3,7 3,9 4,0 4,2 4,4 Weight 25m/min 2,7 2,8 3,0 3,2 3,3 3,5 3,6 3,8 4,0 4,1 (Kg) 55m/min 2,7 2,9 3,0 3,2 3,4 3,5 3,7 3,8 4,0 4,2 90m/min 2,7 2,9 3,0 3,2 3,4 3,5 3,7 3,8 4,0 4,2 Static load max (kg) Axial force max (N)
18 Roller without drive - M8 threaded shaft with screw on free end PM500FE (50E) Ref. SP-M8-14-SUS 4 Ref. Z-081-D Ref. Z-071-D or Ref. C-081-D Speed code Dimension (B) Dimensions PM500FE (50E) Tube lenght (L) / WEIGHT / STATIC LOAD / AXIAL FORCE Tube length m/min 2,9 3,1 3,2 3,4 3,5 3,7 3,9 4,0 4,2 4,4 Weight 25m/min 2,7 2,8 3,0 3,2 3,3 3,5 3,7 3,8 4,0 4,2 (Kg) 55m/min 2,7 2,9 3,0 3,2 3,4 3,5 3,7 3,9 4,0 4,2 90m/min 2,7 2,9 3,0 3,2 3,4 3,5 3,7 3,9 4,0 4,2 Static load max (kg) Axial force max (N)
19 6 - DIMENSIONAL CHARACTERISTICS - CURVE Conical roller with grooved tube - Ri = 800mm PM500FE (50E) Dimensions PM500FE (50E) - Inner radius of curvature (Ri) : 800 mm STEEL TUBE Speed code Dimension (B) Tube lenght (L) 15 25/55 90 G0 mini Grooves for steel tube Depth = 5.8mm G1 mini G2 mini G1+G2 max Tapered sleeve length (l) 200, 300, 400, 500, 600, 700, 800, 900 STAINLESS STEEL TUBE Speed code Dimension (B) Tube lenght (L) 15 25/55 90 Grooves for stainless steel tube Depth = 5.2mm G0 mini G1 mini G2 mini G1+G2 max Tapered sleeve length (l) 200, 300, 400, 500, 600, 700, 800, 900! For a single groove G2=0. ADDITIONNAL WEIGHT Sleeve length (mm) Additional weight (kg) 0,1 0,2 0,3 0,4 0,5 0,6 0,8 0,9 Max load to be convoyed (kg) 50 19
20 Conical roller with pulley for ribbed belt - Ri = 800mm PM500FE (50E) Sd Dimensions PM500FE (50E) - Inner radius of curvature (Ri) : 800 mm Speed code Dimension (B) Tube lenght (L) / Tapered sleeve length (l) 200, 300, 400, 500, 600, 700, 800, 900 ADDITIONNAL WEIGHT Sleeve length Additional weight (kg) 0,1 0,2 0,3 0,4 0,5 0,6 0,8 0,9 Max load to be convoyed (kg) 50 20
21 Conical roller with grooved tube - Ri = 850mm PM500FE (50E) Dimensions PM500FE (50E) - Inner radius of curvature (Ri) : 850 mm STEEL TUBE Speed code Dimension (B) Tube lenght (L) 15 25/55 90 G0 mini Grooves for steel tube Depth = 5.8mm G1 mini G2 mini G1+G2 max Tapered sleeve length 150, 250, 350, 450, 550, 650, 750, 850 STAINLESS STEEL TUBE Speed code Dimension (B) Tube lenght (L) 15 25/55 90 Grooves for stainless steel tube Depth = 5.2mm G0 mini G1 mini G2 mini G1+G2 max Tapered sleeve length 150, 250, 350, 450, 550, 650, 750, 850! For a single groove G2=0. ADDITIONNAL WEIGHT Sleeve length Additional weight (kg) 0,1 0,2 0,2 0,3 0,5 0,6 0,7 0,9 Max load to be convoyed (kg) 50 21
22 Conical roller with pulley for ribbed belt - Ri = 850mm PM500FE (50E) Sd Dimensions PM500FE (50E) - Inner radius of curvature (Ri) : 850 mm Speed code Dimension (B) Tube lenght (L) / Tapered sleeve length 150, 250, 350, 450, 550, 650, 750, 850 ADDITIONNAL WEIGHT Sleeve length Additional weight (kg) 0,1 0,2 0,2 0,3 0,5 0,6 0,7 0,8 Max load to be convoyed (kg) 50 22
23 7 - DIMENSIONAL CHARACTERISTICS - MISCELLANEOUS PVC sleeve Sleeved by compressed air Thickness L (mm) Ø (mm) D (mm) Hardness (mm) ~58 shore A 3 56 Cylindrical tube Thickness (mm) 2 L (mm) Ø (mm) D (mm) SL (mm) Hardness 10 ~58 shore A Grooves tube Coated in natural rubber, nitrile rubber and polyurethane Material Characteristics Hardness (ShA) It improves the adherence of the products conveyed Natural rubber and reduces noise. Do not use in contact with hydrocarbon, oil or grease. 60~65 Nitrile rubber oil and grease. Polyurethane High resistance to abrasion, tearing and oil. 90 Thickness (mm) 3 L (mm) Ø (mm) D (mm) Cylindrical tube L (mm) Ø (mm) D (mm) SL (mm) Grooves tube 23
24 8 - BELT CONVEYOR APPLICATION Condition of use and recommendation Conveying direction Tension system always on the return roller Tension Slider bed Different types of support table Roller table Motorized roller Shaft or holding roller Return roller Mount the motorized roller downstream of the conveying direction and the return roller upstream. Structure To resist to the belt tension, reinforced endcaps, with two precision ball bearings are mounted on the roller. Endcaps on free side Endcaps on motor s side 24
25 Transfer capacity SPEED CODE15 Weigth Kg 40 Conveyor s length 500mm Weigth Kg 40 Conveyor s length 1000mm μ = 0,5 μ = 0,3 μ = 0, μ = 0,5 μ = 0,3 μ = 0, Conveyor s 0 width mm Conveyor s width mm Weigth Kg 40 Conveyor s length 1500mm Weigth Kg 35 Conveyor s length 2000mm μ = 0,5 μ = 0,3 μ = 0,2 5 Conveyor s 0 width mm μ = 0,5 μ = 0,3 μ = 0,2 Conveyor s width mm 25
26 SPEED CODE 25 Conveyor s length 500mm Conveyor s length 1000mm Weigth Kg 25 Weigth Kg μ = 0,5 15 μ = 0,5 10 μ = 0,3 μ = 0,2 10 μ = 0,3 μ = 0,2 5 5 Conveyor s 0 width mm Conveyor s 0 width mm Weigth Kg 25 Conveyor s length 1500mm Weigth Kg 18 Conveyor s length 2000mm μ = 0, μ = 0,5 10 μ = 0,3 μ = 0,2 8 6 μ = 0,3 μ = 0,2 5 Conveyor s 0 width mm 4 2 Conveyor s 0 width mm 26
27 SPEED CODE 55 Weigth Kg 12 Conveyor s length 500mm Weigth Kg 10 Conveyor s length 1000mm μ = 0,5 μ = 0,3 μ = 0, μ = 0,5 μ = 0,3 μ = 0, Conveyor s length 1500mm Conveyor s length 2000mm Weigth Kg 10 Weigth Kg μ = 0,5 μ = 0,3 μ = 0, μ = 0,5 μ = 0,3 μ = 0,
28 Dimensional characteritics and weigth Hexagonal plain shaft on motor side and hexagonal shaft with spring on free end 1000 Ref. Z-081-D Ref. Z-071-D or Ref. C-081-D Speed code Dimension (B) Tube length (L) / 55 Ref. Z-081-D Ref. Z-071-D or Ref. C-081-D Speed code Dimension (B) Tube length (L) / 55 WEIGHT / STATIC LOAD / AXIAL FORCE Tube length m/min 2,7 2,9 3,0 3,2 3,4 3,5 Weigth 25 m/min 2,5 2,7 2,8 3,0 3,2 3,3 (Kg) 55 m/min 2,5 2,7 2,9 3,0 3,2 3,4 Static max load (kg) Axial force max (N)
29 Various machining, coating and sleeves are available to insure a proper centering and a good adherence. Tube machined crowned, zinc coated or stainless steel L (mm) C (mm) Ø (mm) d (mm) Tube machined crowned with natural rubber coating / polyurethane, in steel or stainless steel. 3mm Thickness d L (mm) C (mm) Ø (mm) d (mm) D (mm) Tube with centering sleeve, zinc coated or stainless steel. l Thickness (mm) L (mm) Ø (mm) D (mm) l (mm) /4 L 1/4 L 29
30 9 - MOUNTING ON THE FRAMES Mounting plate for plain 11.1 mm hexagonal shaft - FLAT ON TOP Conveyor with hole Ø12,1mm Reference Plate Z-071-D Mounting plate for plain 11.1 mm hexagonal shaft - ANGLE ON TOP Conveyor with hole Ø12,1mm Reference Plate Z-081-D Reference Plate C-081-D Conveyor with holes ø8,4mm Bolt Reference SP-M8-14-SUS 30
31 10 - WIRING With CBM-105 circuit board Circuit board protection case (not supplied) PLC 24VDC The circuit board controls and protects the brushless motorized roller. With HB510 circuit board Towards another HB510 circuit board Circuit board protection case not supplied PLC 24VDC Towards another HB510 circuit board The circuit board controls the motorized roller and manages the zones to ensure ZPA (zero pressure accumulation) 31
32 11 - ACCESSORIES Ribbed belt Pitch Pitch Pitch between the rollers (mm) For pulley Ø43mm Number of teeth Load to be conveyed Load to be conveyed Load to be conveyed Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ Ref. 2PJ Ref. 3PJ Ref. 4PJ
![Extension cables Longueur Length 10mm [0.39"] 30mm [1.18"] 37mm [1.46"] 9 Pin Male M-F-EXT-9 PIN-LENGTH (MM) 9 Pin Female 60mm [2.](/docs-images/88/114712037/images/33-0.jpg "36\"] Lenght 1200mm 2700mm Part number of the extension cable ACE-CBM-B1200 ACE-CBM-B2700 Rounded belts Pitch Pitch Pitch between the Belt reference rollers 75mm POLYCORD-R5-256 100mm POLYCORD-R5-302")
33 Extension cables Longueur Length 10mm [0.39"] 30mm [1.18"] 37mm [1.46"] 9 Pin Male M-F-EXT-9 PIN-LENGTH (MM) 9 Pin Female 60mm [2.36"] Lenght 1200mm 2700mm Part number of the extension cable ACE-CBM-B1200 ACE-CBM-B2700 Rounded belts Pitch Pitch Pitch between the Belt reference rollers 75mm POLYCORD-R mm POLYCORD-R VDC power supply Reference Input Output Power Start-up boost CT V-10A 240W 120% 380~480V QT V-20A 480W 150% 3 ph QT V-40A 960W 150% - Very weak inrush current. 33
34 24 VDC distribution connector poles with markings«24v / OV» - 4 connectors per pole - Cable mm (AWG...) Reference Connector PD-2P Circuit board Zone power cable Mains power supply 24VDC Ref. PD-2P Distribution connector 24VDC Power cable between zones 34
35 ITOH DENKI PM500 E XG0SC001 10/ IP54 24VDC 55m/mn S PRODUCT IDENTIFICATION Round label 1 1 Product reference number Month and year of manufacture Serial number 5 Power supply 3 6 Speed Operation Square label Product reference number Month and year of manufacture Serial number Power supply 6 7 Nominal intensity Absorbed power 8 Speed 7 Operation 1 35 Serie Speed code Tube lenght (L) Without brake
36 ANNEX 1 INCORPORATION DECLARATION in accordance with the EC Machinery Directive 2006/42/EC, Annex II B The manufacturer: ITOH DENKI CO., Ltd Asazuma-Cho, Kasai, Hyogo Japan Distributed in Europe by : ITOH DENKI Europe SAS 490 avenue des Jourdies - ZAE les Jourdies - BP 323 hereby declares that the product series : PM500FE MOTORIZED ROLLER requirements of this Directive. Commissioning is prohibited until the whole machine/system in which it is incorporated is declared to be in compliance with the EC Machinery Directive ITOH DENKI CO., Ltd Toshiyuki TACHIBANA Asazuma-Cho, Kasai, Hyogo Japan EC Directives applied : Machinery Directive 2006/42/EC European EMC Directive 2014/30/EC European RoHS Directive 2011/65/EU K. TAMURA, Managing Director 36
37 ITOH DENKI EUROPE S.A.S. 490 Av. des Jourdies Z.A.E. les Jourdies SUCCURSALE ITOH DENKI ANGLETERRE Suite 1 Trinity Space Centre Waldorf Way 37 SUCCURSALE ITOH DENKI ALLEMAGNE Neumeyerstrabe NÜRNBERG - Deutschland
PM500FE SERIE TECHNICAL DOCUMENTATION
SUMMARY 1 - Presentation of the PowerMoller product range Page 3 2 - Presentation of the series Page 4 General characteristics Structure and description Applications Characteristics depending on circuit
PM605FE SERIE TECHNICAL DOCUMENTATION
SUMMARY 1 - Presentation of the PowerMoller product range Page 3 2 - Presentation of the series Page 4 General characteristics Structure and description Applications Characteristics depending on circuit
PM500FE-B SERIE TECHNICAL DOCUMENTATION
SUMMARY 1 - Presentation of the PowerMoller product range Page 3 2 - Presentation of the series Page 4 General characteristics Structure and description Applications Characteristics depending on circuit
PM500XE SERIE TECHNICAL DOCUMENTATION
SUMMARY 1 - Presentation of the PowerMoller product range Page 3 2 - Presentation of the series Page 4 General characteristics Structure and description Applications 3 - Transfer capacity Page 8 Ribbed
PM500XK SERIES TECHNICAL DOCUMENTATION
SUMMARY 1 - Presentation of the PowerMoller product range Page 3 2 - Presentation of the series Page 4 Structure and description Applications General characteristics 3 - Transfer capacity Page 8 Ribbed
PM500VE SERIE TECHNICAL DOCUMENTATION
SUMMARY 1 - Presentation of the PowerMoller product range Page 3 2 - Presentation of the series Page 4 General characteristics Structure and description Applications General characteristics with IB-P circuit
Company. Pioneer, developer and leader in motorized roller. Europe. Japan U.S.A. Asia
Company Pioneer, developer and leader in motorized roller During the last 70 years ITOH DENKI has become recognized throughout the world for the design, manufacture and marketing of motorized rollers and
Built-in ZPA Logic Hybrid Driver Card No. HB-508S
Built-in ZPA Logic Hybrid Driver Card No. HB-508S HB-508S is the new generation of Built-in ZPA Logic Hybrid Driver Card. The HB-508S has both slug (train) tote release mode and singulated tote release
INTERROLL 24VDC PRODUCTS ROLLERDRIVES & DRIVECONTROL CARD
P PRODUCT R O D U C T I NINFORMATION F O R M A T I O N INTERROLL 24VDC PRODUCTS ROLLERDRIVES & DRIVECONTROL CARD INTERROLL EC100 24VDC ROLLERDRIVE Product Features Wide speed range Multiple drive options
Flat-Right Angle Transfer
F-RAT-S User Manual Flat-Right Angle Transfer Thank you for purchasing Flat Right Angle Transfer unit. Before using the product, carefully read this manual and retain it for future reference. Make sure
CBM-105FN/FP Circuit Board
CBM-105FN/FP Circuit Board Features Adjustable acceleration and deceleration time (0 to 2.5s) Stable speed operation Manual or automatic recovery of the thermal overload device One (1) rotary switch to
Flat-Right Angle Transfer
F-RAT-S User Manual Flat-Right Angle Transfer Thank you for purchasing Flat Right Angle Transfer unit. INDEX 1. 2. 3. 4. 5. 6. 7. 8. Important safeguards P1 Product designation P2 Structure P2 Power P2
Latest News ECDriveS 24 V drive system for roller conveyors
Drive Technology \ Drive Automation \ System Integration \ Services Latest News ECDriveS 24 V drive system for roller conveyors Current status 04/2017 23484055 / EN Table of contents Table of contents
. DC Model Rollers. Hybrid Card. 2-Zone Controller. AC Model Rollers. Transfers
Features and Solutions... Selecting a Moller... 4-6. DC Model Rollers PM0HS... 7 PM486FE... 8-9 PM486FS... 10-11 PM486FP... 1-1 PM486FH... 14 PM486LD... 15 PM486XE/XP... 16-17 PM570FE... 18-19 PM570KE/KT...
POWER MOLLER. The Modern Approach to Conveyor Motorization
ITOH DENKI, USA POWER MOLLER POWER MOLLER The Modern Approach to Conveyor Motorization 135 Stewart Road Hanover Industrial Estates Wilkes-Barre, Pennsylvania 18706-1462 Telephone: 570-820-8811 Facsimile:
Innovation driver. Designed and made in FRANCE. Drum motors catalog for Conveyors.
Innovation driver Designed and made in FRANCE Drum motors catalog for Conveyors www.sirem.fr Motorized drum for the conveying by SIREM The belt conveyor is a handling or carrying device for the transportation
F-RAT-S300 Serie. User manual
F-RAT-S300 Serie User manual Summary 1. Safety instructions and regulations 3 2. Precautions to be taken during handling 3 3. Product presentation 4 4. Product identification 4 5. Mechanical installation
CB-005N Circuit Board
CB-005N Circuit Board Provides Thermal Protection for board and motor Built-in current limiter Error Output signal for self diagnosis Dynamic brake control Variable speed (0% - 100%) by onboard potentiometer
ROLLERS SERIES 3500 Fixed drive conveyor roller. ROLLERS SERIES 3500 Fixed drive conveyor roller. Technical data
Application area Driven unit handling conveying, such as transport of cardboards, containers, barrels or tires. Low-noise The use of polyamide drive heads results in very quiet running. Lateral loading
www.pulseroller.com sales@pulseroller.com support@pulseroller.com www.pulseroller.com/contact PRODUCT CATALOG [The information contained in this catalog is subject to change without notice.] 480109YUR(.7.017)
Checkout motorized drums catalog
Innovation driver Designed and made in FRANCE Checkout motorized drums catalog www.sirem.fr Motorized drums for Checkout by SIREM The supermarket checkouts are carefully designed so as to enhance the comfort
Index. Purchase guide. Belt conveyor. Elevator Belt conveyor. Modular belt conveyor. Stainless steel belt & slat chain conveyor. Accessories & options
belts SOMEFI is a company dedicated to the manufacture and sale of conveyors and modular handling equipment. For more than 40 years SOMEFI has offered a complete range of industrial conveyors, of flexible
DRUM MOTOR 113LP 113.5Ø 0.06kW kW, with planetary gearbox in polymer or polymer / steel combination for non-continuous operation
16 DRUM MOTOR UNIT HANDLING DRUM MOTOR 11LP 11.5Ø 0.06kW - 0.7kW, with planetary gearbox Product description This Pulley is the ideal operator for light and medium conveyors, for non-continuous use. Characteristics
UTA STANDARD. Ductable units. Range. Air handling unit with high available static pressure. NEW Eco-Design Filter. V3000 control Fresh air management
Ductable units NEW Eco-Design Filter Air handling unit with high available static pressure V3000 control Fresh air management The range of air handling units is designed for suspended ceiling heating and
At Dyno we make the world of business go round. Up and down. And side to side.
Roller Catalogue 2017 SECTION At Dyno we make the world of business go round. Up and down. And side to side. Our conveyors make moving meat, veges, fruit, packages, gravel, and even luge sleds simple and
Planning Section. Environmental conditions. Different power supply. Industrial solutions
Planning Section 86 89 Environmental conditions Different power supply 90 Industrial solutions 91 Power calculation and selection of the Motorized Pulley for package transportation 93 Oil types and contents
Belt Conveyor System. The Just-in-Time (JIT)
24 8 The Just-in-Time (JIT) Belt Conveyor System Success is often measured by efficiency and speed. For Robotunits customers this means always keeping one step ahead regarding the time required for delivery,
Green Power 2.0 MASTERYS GP
Green Power 2.0 MASTERYS GP 60 to 120 kva/kw OBJECTIVES The aim of these specifications is to provide: the information required to choose the right uninterruptible power supply for a specific application.
1 ED. UNIT EN 02/2018 RULMECA DRIVE ROLLERS SERIES BL3. Moving ahead.
1 ED. UNIT EN 02/2018 RULMECA DRIVE ROLLERS SERIES BL3 Moving ahead. RDR DRIVE ROLLERS SERIES BL3 Moving ahead. Rulmeca - Moving ahead. Since its foundation in 1962, the Rulmeca Group, headquartered
Motorized Pulley 80LS A very compact strong drive for small high use conveyors
Product description This Motorized Pulley is perfect for high torque applications with limited space or access. Characteristics Applications Salt water resistant aluminum bearing housings Small conveyors
User manual Interroll RollerDrive EC310
User manual Interroll RollerDrive EC310 Chapter-ID: User manual Chapter-ID: Version Chapter-ID: Translation of the original instructions Manufacturer's address Interroll Engineering GmbH Hoeferhof 16 D-42929
RE-PR3-E-86&105 3-Phase Panel Mount 86 and 105kW
Page 1 of 6 3-Phase Panel Mount 86 and 105kW Features: Benefits: 0-10Vdc, 0-5Vdc, 4-20mA or manual via potentiometer control input Over temperature protection with auto reset Enclosed panel mounting Efficient
Driver Card. ZPA Hybrid driver card. Standard Accessories. Option. Built-in *ZPA logic for avoiding collisions between transferred loads
Driver Card ZPA Hybrid driver card Conformity Conformity Applicable MDR models Driver model CAUTION tandard Accessories Option Built-in *ZPA logic for avoiding collisions between transferred loads Multiple
Linear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46
Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS
Pilot-Operated Proportional DC Valve Series D*1FH
Characteristics The pilot-operated proportional DC valves series of the D*1FH series are high-performance valves with electronic spool position feedback. These valves are available in sizes NG10 to NG2
Urethane. Ralphs-Pugh Urethane Products
Ralphs-Pugh Products elastomers are unique because they combine many of the advantages of rigid plastics, metals and ceramics with the elasticity of rubber. resists abrasion and reduces the affects of
Lexium integrated drives
Description ILp for DeviceNet, EtherCAT, Modbus TCP, ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for DeviceNet, EtherCAT, Modbus TCP or and a brushless
MELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c
MELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c Voltage output The K7 Performance Level c series of Gefran are pressure transmitters for using in high temperature environment. The main characteristic
Belt Driven. Conveyors (989) Roller Conveyors Belt Driven Live. Roller Conveyors
Belt Driven Live Conveyors Conveyors - 195 - Light Duty Transportation Type... 196 Minimum Pressure Accumulation Type... 198 Medium Duty Transportation Type... 200 Heavy Duty Transportation Type... 202
CPLab / CP Factory. Application module magazine. Data sheets
CPLab / CP Factory Application module magazine Data sheets Data sheet: Push-in fitting QSM-M5-4 #153304 Size Mini Nominal size 2.2 mm Type of seal on screw-in stud Sealing ring Container size 10 Design
Dycon D2430 EN54-4 Fire Alarm Power Supply Series
Dycon D2430 EN54-4 Fire Alarm Power Supply Series Technical Description Installation and Operating Manual Construction Product Regulation 0359-CPR-00434 Page 1 of 14 Contents 1. General... 3 1.1 Product
Belt Conveyors GUF-P MINI
Belt Conveyors GUF-P MINI Conveyor frame profiles mk 2075 mk 2100 mk 2150 22 The minimal install height, as well as the lower walls for direct placement of the conveyor on the machine bed, are ideal for
Factor 1) Modulating torque 4) [Nm] 200 F14 G1/2 GK : :
![Factor 1) Modulating torque 4) [Nm] 200 F14 G1/2 GK : :](/thumbs/93/112621325.jpg "Factor 1) Modulating torque 4) [Nm] 200 F14 G1/2 GK : :")
Nominal Max. valve 4) Valve Valve attachment Type Reduction ratio EN ISO 5210 Factor 1) Nominal Gearbox Max. input s Input shaft 2) Weight 3) Option DIN 3210 Option [kg] 120 60 GK 10.2 1:1 0.9 135 66 20
MELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c
MELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c Voltage output The K7 Performance Level c series of Gefran are pressure transmitters for using in high temperature environment. The main characteristic
MOONS SM servo motors offer a great combination of Power, Precision and Value:
MOONS SM Series of servo motors has been expanded and improved. The SM Series now includes a variety of standard windings, more feedback options, and more connection options. Some ratings have increased,
6.2. Conveyor Sensor Systems. 200 Series Zero Pressure Accumulation. 200 Series Zero Pressure Accumulation
.2 Conveyor Systems Contents Description Product Overview...................... Product Selection Basic and Progressive Logic s..... Standard s.................... Accessories...........................
Differential Pressure Switch QBM81-
s 1 552 Differential Pressure Switch QBM81- for air and nonaggressive gases For ventilation and air conditioning plants To monitor air filters, air flow, fan belts To monitor pressure in clean rooms, kitchens
Fincor Series 2230 MKII/2240
Fincor Series 2230 MKII/ Fincor Series 2200 regenerative drives are ideal for your more demanding applications. They feature flexibility with ratings up to 5 horsepower. The Series 2230 MKII offers new
Lexium integrated drives
Description ILp for CANopen, PROFIBUS DP, RS ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for CANopen DS, PROFIBUS DP or RS and a brushless DC motor.
Gas-actuated thermometer with switch contacts Stainless steel version Model 73
Temperature Gas-actuated thermometer with switch contacts Stainless steel version Model 73 WIKA data sheet TV 27.01 for further approvals see page 12 Applications Control and regulation of industrial processes
Timing Belts
Timing Belts www.medway-uk.com 1 Timing Belts Imperial Product Description The MEDWAY classical timing belt (synchronous) has a trapezoidal tooth profile providing a positive drive by the meshing of belt
Contents. Part no.: MLC500T Safety light curtain transmitter
Part no.: 68000315 MLC500T30-1500 Safety light curtain transmitter Figure can vary Contents Technical data Suitable receivers Dimensioned drawings Electrical connection Circuit diagrams Operation and display
mk Roller Conveyors mk Conveyor Technology 240
mk Roller Conveyors mk Conveyor Technology 240 Contents mk Roller Conveyors RBS-P 2065/2066 242 RBS-P 2255 246 RBT-P 2255 250 RBM-P 2255 254 Rollers 258 Application Examples 260 mk Conveyor Technology
Online data sheet. DBS60E-S4EP05000 DBS60 Core INCREMENTAL ENCODERS
Online data sheet DBS60ES4EP05000 DBS60 Core DBS60ES4EP05000 DBS60 Core A B C D E F Ordering information Type Part no. DBS60ES4EP05000 1071649 Other models and accessories www.sick.com/dbs60_core Illustration
Wheels and castors with pneumatic tyres
Wheels and castors with pneumatic tyres 190 we innovate mobility www.blickle.com Table of Contents P L LS Series Load capacity Page P 180-490 mm 50-525 kg 192/193 194 L-P 200-20 mm 75-250 kg LS-P 400-415
Sizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
From a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling
ARNOTT HANDLING LTD From a modest beginning in 1976 producing small quantities of gravity conveyor rollers, Arnott Handling Equipment Limited has grown to become one of the United Kingdom s foremost manufacturers
Linear Actuator with Toothed Belt Series OSP-E..B
Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7
ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS
ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES 1 ELECTRIC AXIS - RODLESS ELEKTRO SK SERIES Electric axis without screw piston rod, with V-Lock interface. The cylinder frame is made of anodized extruded
index Megadyne PV-belts 2 Belt features and structure 3 Belt cross sections and dimensions 4 Pulleys 5 Standard belt range 6 Symbols, units, terms 8
pv-belts index Megadyne PV-belts 2 Belt features and structure 3 Belt cross sections and dimensions 4 Pulleys 5 Standard belt range 6 Symbols, units, terms 8 Drive calculation procedure 9 Table 8: performance
MODEL: PSN3. Final Control Elements. STROKE 6: 0 to 60 mm (0 to 2.36 )
Final Control Elements SERVO-TOP II ELECTRONIC ACTUATOR (linear type; max. thrust 5000 N) Functions & Features Control valve actuator drive I to I positioner incorporated Lightweight, compact design High
LONG LENGTH DESIGN MANUAL CONTENTS PAGE. Introduction Long Length features & benefits... 2 Long Length belting programme... 7
DESIGN MANUAL LONG CONTENTS PAGE LENGTH Introduction Long Length features & benefits... 2 Long Length belting programme... 7 Drive Design Belt drive selection procedure... 8 Belt pitch selection guides...
3242 G 024 BX4 CS/CC 24 3,6 18,2 77,3 1,6 / 12,4 9 / ball bearings, preloaded 0,015. stainless steel 370 electronically reversible
Brushless DC-Servomotor with integrated Motion Controller and or CN interface 6 mnm For combination with Gearheads: 3/1, 32, 32/3, 32/3 S, 38/1, 38/1 S, 38/2, 38/2 S 3242... BX4 CS/CC 1 2 3 4 Nominal voltage
Safety rope switches with reset for emergency stop
Safety rope switches with reset for emergency stop Selection diagram 8 8 83 ACTUATORS ACTUATORS CONTACT BLOCKS 18 9 21 1NO+ FP FD FL FC 22 33 34 LED signalling light CONDUIT ENTRIES For other available
catalogue Endless handling solutions CATALOGUE EDITION AU 04 AUTOMOTIVE MATERIALS HANDLINGS DRIVE AND DRIVEN ROLLERS
au Endless handling catalogue solutions CATALOGUE EDITION AU 04 AUTOMOTIVE MATERIALS HANDLINGS DRIVE AND DRIVEN ROLLERS INDEX DUGOMRULLI HISTORY 3 PRODUCT RANGE 5 AUTOMOTIVE ROLLER SOLUTIONS 7 COATED PALLET
THE TABLE OF CONTENTS
ROLLER CATALOG THE TABLE OF CONTENTS General Information Page Sizes and 2 Retention and 2 Construction 2 Bearing Features and Lubrication 2 Sprocket Information 2 Groove Information 3 Load Capacity Reference
POWER-WIN TECHNOLOGY CORP.
FEATURES Medical 60601-1 3.1 rd Edition approved U-Channel, End fan and Top fan types available Optional high efficiency OR-ing FET diode Current share function 2 year warranty ELECTRICAL SPECIFICATIONS
Motorized Pulley 630M & 630H, Ø in. (630 mm)
Our 24.80 diameter Motorized Pulley range fers two different performance levels for BULK applications: - M for Medium duty - H for Heavy duty It is important to note the product differences and choose
NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
XR Conveyor Maintenance Guide
XR Conveyor Maintenance Guide EN-0035 Rev. A XR Conveyor Maintenance Guide www.qdraw.com Table of Contents 05/20/2009 Overview Page 3 XR Conveyor Assembly Page 4 General Information Exploded View of an
MASTERYS IP+ 10 to 80 kva
MASTERYS IP+ 10 to 80 kva OBJECTIVES The aim of these specifications is to provide: the information required to choose the right uninterruptible power supply for a specific application. the information
150mm Conveyor System
150mm Conveyor System FlexMove Product Catalogue 231 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM.
C-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS
C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence: about
Mini slides SLTE, electric
Key features Range of applications Special features The electric mini slide SLTE is ideal for use in automation applications where controlled end-position cushioning (gentle stopping), constant travel
SE-3SCR-LM MANUAL MOTOR LOAD MANAGER
3714 Kinnear Place Saskatoon, SK Canada S7P 0A6 Ph: (306) 373-5505 Fx: (306) 374-2245 www.littelfuse.com/relayscontrols SE-3SCR-LM MANUAL MOTOR LOAD MANAGER MARCH 5, 2013 REVISION 4 MOTOR LOAD MANAGER
ATyS d M Remotely operated Transfer Switching Equipment from 40 to 160 A
ATyS d M Remotely operated Transfer Switching Equipment Transfer switches new The solution for > Applications with an external ATS/AMF controller > Building Management Systems (BMS) atys-md_002_b_1_cat
European standard. Safety instructions. Informations stipulated TAGS PRESENT ON ANY WEBBING. Lifting slings
European standard (Extract of European Standards NF EN 1492-1 and 2) This European standard specifies the application fields for all textile lifting equipment and accessories, as well as their manufacturing
Engineering Manual Multidirectional Roller Top Belt Series 2253RT
Engineering Manual Multidirectional Roller Top Belt Series 2253RT 1Chains 1 0& sprockets 5 0Wear 5strips 5 3accessories 3 0 0 5return 1 0systems 5 4supports 0 5 Curves 0 0& 0tracks 5 a Side 5 1guide 5
1/4 turn ACTELEC SG05.1 to SG12.1 (AUMA)
Type series booklet 8521.14/3--10 1/4 turn ACTELEC SG05.1 to SG12.1 Direct 1/4 turn electric actuators ACTELEC AUMA SG05.1 - SG07.1 - SG10.1 - SG12.1 Output torques up to 1200 Nm Applications All sectors
Differential Pressure Switch QBM81-
s 1 552 Differential Pressure Switch QBM81- for air and nonaggressive gases For ventilation and air conditioning plants To monitor air filters, air flow, fan belts To monitor pressure in clean rooms, kitchens
CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
Features. Description. Table of Contents
Features Very low profile Very high efficiency (typically 90%) Single and dual output versions Input voltages from 24V to 110VDC nominal voltages from 5V to 48VDC -40 C to +71 C operation without de-rating
DELPHYS GP. Green Power 2.0 range 160 to 1000 kva/kw
DELPHYS GP Green Power 2.0 range 160 to 1000 kva/kw OBJECTIVES The aim of these specifications is to provide: the information required to choose the right uninterruptible power supply for a specific application.
Spartec CONVEYORS DESIGN MANUFACTURE INSTALLATION CONVEYORS
DESIGN MANUFACTURE INSTALLATION PARTS SCRAP PACKAGE BULK HANDLING LOW PROFILE DIE-VEYORS 2 Frame Heavy Duty BELT WIDTH + 1 1/2" 3/4" BELT WIDTH 3/4" 2" 1" BELT WIDTH + 3/4" SECTION VIEW WIDTHS: 2 Thru
AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals
AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals 25 to 55 A culus CE Application AF09... AF38 4-pole contactors are used for controlling power circuits up to 600 V AC and 240 V DC.
Heating Cost Allocation Valve with local acquisition of the flow temperature
2 823 SYNERGYR Heating Cost Allocation Valve with local acquisition of the flow temperature WRV83... Electronic metering and positioning unit. Measures the flow rate and the temperature differential, calculates
2200 SERIES CONVEYORS Low Profile, High Performance, Fabric & Modular Belt Conveyors ENGINEERING MANUAL. Fast & Simple to Use Online Configurator
Superior V-Guided Belt Tracking Universal Motor & Mounting Package ENGINEERING MANUAL Fast & Simple to Use Online Configurator Industry-Best Product Transfers 2200 SERIES CONVEYORS Low Profile, High Performance,
A5 BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK
BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK Belt-driven rodless electric axis with a V-Lock interface. The structure features an extremely lightweight yet high-strength anodised aluminium extruded
Operating Instructions
Page 1 of 11 CONTENTS 1 PURPOSE... 3 2 APPLICATION... 3 3 DESCRIPTION... 3 4 FUNCTION... 5 5 TECHNICAL PARAMETERS... 5 6 TYPE IDENTIFICATION KEY MMP... 6 7 DIMENSIONAL DRAWING... 7 8 HYDRAULIC DIAGRAM...
LA LIBERTÉ DE CONCEVOIR. Flat belt conveyors
LA LIBERTÉ DE CONCEVOIR Flat belt conveyors FRENCH INDUSTRIAL LEADER has brought innovating solutions to the industry. Our approach offers a complete freedom of design thanks to a unique range of flat
KTR Torque Limiters Overload Protection Systems
KT Torque Limiters Overload Protection Systems UFLEX - Friction Disk - Zero Backlash Ball Detent KT SI - Ball/oller Bearing Style KT SI Compact - Zero Backlash Ball Detent Catalog Contents (Metric) Page
AF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101419D0201 06/04/11-40-00-.. / Z-40-00-.. 4-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 440
Directional control valves, direct operated, with electrical position feedback and integrated electronics (OBE)
Directional control valves, direct operated, with electrical position feedback and integrated electronics (OBE) Type 4WRPE RE 29122 Edition: 2014-11 Size 10 Component series 3X Maximum operating pressure
(1,5 modules per pole)
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 DX 3 MCB 36kA, 80A CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
MOTORIZED PULLEYS UNIT HANDLING
2 ED. MOT EN 03/14 2 ED. MOT EN 03/14 MOTORIZED PULLEYS UNIT HANDLING GENERAL CATALOGUE MOTORIZED PULLEYS UNIT HANDLING GENERAL CATALOGUE AXIS & Stuifmeel BV Coenecoop 1 2741 PG Waddinxveen Netherlands
ROTARY MOTION CONTROL
ROTARY MOTION ONTROL Technical Data Sheet Mechanical Torque Limiter The trend in industry is to design and incorporate more automation into production processes. Machines are becoming more accurate, requiring
PITNEY BOWES FLEXIBLE INK JET TRANSPORT 36 FIT BASE: FIT-36. Parts Manual. (BOM: FIT36rev1.0) FIT-36parts_rev0 1
FLEXIBLE INK JET TRANSPORT 36 FIT BASE: FIT-36 Parts Manual (BOM: FIT36rev1.0) FIT-36parts_rev0 1 VERSION HISTORY The table below summarizes the history of this document as it is published onto the company
Continuous level measuring system NB 3000 Selection list
Table of contents Page Overview 2 ------------------------------------------------------------------------------------------------------------------- Specifications 3 -------------------------------------------------------------------------------------------------------------------
KMH KMH500/630/800 HORIZONTAL MACHINING CENTERS
KMH KMH5/63/8 HORIZONTAL MACHINING CENTERS Index Cover 1 Cover Contents 2-3 Table of Contents Structure 4-5 Design & Rigidity 6 3 Axis Transmission 7 Ballscrew Cooling System 8-9 ATC Unit Maintenance &
G10TE HG Linear Guideway
G10TE01-0310 I HG Linear Guideway Preface... 1 1... 1 1-1... 1 1-2... 2 1-3... 3 1-3-1 1-3-2 1-4... 4 1-4-1 1-4-2 1-4-3 1-4-4 1-4-5 1-5... 6 1-5-1 1-5-2 1-5-3 1-5-4 1-6... 9 1-7... 9 1-7-1 1-7-2 1-8...