Contents. Compact ACB 1600A. Ratings 03 Ordering 04 Electrical diagram. 06 Accessories 08 Structure 09 Dimensions 10

Size: px

Start display at page:

Download "Contents. Compact ACB 1600A. Ratings 03 Ordering 04 Electrical diagram. 06 Accessories 08 Structure 09 Dimensions 10"

Curtis Perry
5 years ago
Views:

1 Compact ACB 100A

2 Contents Compact ACB 100A Ratings 0 Ordering 04 Electrical diagram 0 Accessories 08 Structure 09 Dimensions 10

3 Compact ACB 100A Main Characteristics Rated current : Cat.A ~1000A, (Ics: 0kA/4Vac Ics=100%*Icu) Cat.B ~100A Rated breaking time : cycle Short time withstand current : 50kA/1sec (Cat.B) Mechanical life cycle(without maintenance) : 12,500(Cat.B), 5,000(Cat.A) Cradle : Standard type(bottom operating) Various operating(control) powers - DC 24/V, AC/DC110V, DC125V, AC/DCV, AC 80V Accessories - ACB: UVT, Ready to Close S/W, Remote reset coil(res), Rating Plug, Manual Reset Button, Counter, ON/OFF Button Lock, Key Lock, etc. - Cradle: MOC(Mechanism Operating Cell s/w), Cell S/W(Cradle Position Cell s/w), Mechanical Interlock, Door Interlock, Position Keylock, Padlock/Position Lock, Safety Shutter, etc. Standards IEC DEKRA CB & CCC Certificates (Test for the certificates is expected to be finished in Jun.) Ratings Common Characteristics Number of poles (P) P/4P Frequency (Hz) 50/0Hz Rated operating voltage (V, Ue) V Rated insulation voltage (V, Ui) 1000V Rated impulse withstand voltage (kv, Uimp) Circuit Breaker as per IEC Type 12kV AN/AH/AR-C Description AN-1C AH-1C AR-10C Ampere Frame (AF) Rated current (In Max.) at 40 (A) (A) (A) (A) (A) (A) Rated current of neutral pole (A) Rated breaking capacity (Icu) (ka) IEC AC V/00V/0V 50 - AC 500V/0V AC 4V/80V/0V 50 - AC 4V/80V 0 50 AC 240V/V 0 Rated breaking capacity (Ics) (ka,% Icu) 100% Rated making capacity (Icm) (ka) /18. - Rated Short-time capacity (Icw) (ka) 1sec 42/ Operating time (t) (ms) Common Mechanical and Electrical Life Cycle Life cycle (time) Common Demension and Weight Weight (P/4P) Dimension (P/4P) (kg) (mm) Draw-out type (P/4P) 1/19.5 Fixed type (P/4P) 1/19.5 Draw-out type (H : 1., D : 257) Fixed type (H : 28, D : 185.) Total breaking time 40 Closing time Mechanical 12,500 5,000 Electrical,000,000 Cradle (P/4P) 22/2 W(P/4P) 2.4/2 W(P/4P) 272.4/42.4 I

4 Ordering AN-1C-10J M1 D1 D1 FX NG0 Motor rated voltage MA Without Motor M1 AC/DC 100V ~ 10V M2 AC/DC 200V ~ 250V M DC 125V M4 DC 24V ~ 0V M5 DC V ~ 0V M AC 80V ~ 4V M7 AC 0V ~ 0V M8 AC V Closing coil rated voltage D0 D1 D2 D D4 D5 D D7 Without Closing coil AC/DC 100V ~ 10V AC/DC 200V ~ 250V DC 125V DC 24V ~ 0V DC V ~ 0V AC 80V ~ 0V AC V Shunt coil rated voltage D0 Without Shunt coil D1 AC/DC 100V ~ 10V D2 AC/DC 200V ~ 250V D DC 125V D4 DC 24V ~ 0V D5 DC V ~ 0V D AC 80V ~ 0V D7 AC V Auxiliary switch with charging type FX Standard 4C with "OFF" charging type FC Standard 4C with "ON" charging type SC Standard 4C with "ON" charging type for TCS type * TCS : Tripping coil supervision 0 Without trip relay N OCR TYPE N NORMAL 0 Without trip relay G Communication & protection G Ground fault (Residual earth fault protection), No Communication * L,S,I,G configuration as standard (with LED indicators) 0 Without trip relay 0 Control voltage & frequency 0 Self-Power, 0Hz 5 Self-Power, 50Hz A A OCR TYPE Ammeter G E C X * Comm. And output contacts DO NOT work under self-power condition. (AC0, AK0, AX0, AC5, AK5, AX5) * Communication and output contacts for L,S,I,G do not work except OCR LED without control power supply. - AG0, AG5, AZ0, AZ5, AE0, AE5 G Communication & protection Ground fault (Residual earth fault protection), No Communication Earth Leakage(Extermal CT), No Communication Communication + Ground fault (Residual earth fault protection) Communication + Earth Leakage(Extermal CT) 0 Control voltage & frequency 0 Self-Power, 0Hz 1 AC/DC 110V~V, 0Hz 2 DC 24V~V, 0Hz 5 Self-Power, 50Hz AC/DC 110V~V, 50Hz 7 DC 24V~V, 50Hz P P OCR TYPE Power meter C X * Communication functions are Normal. (Function unavailable without control power supply) * Applicable to generator protection purpose * Voltage module of P type or more is basic. G Communication & protection Communication + Ground fault (Residual earth fault protection) Communication + Earth Leakage(Extermal CT) 0 Control voltage & frequency 1 AC/DC 110V~V, 0Hz 2 DC 24V~V, 0Hz AC/DC 110V~V, 50Hz 7 DC 24V~V, 50Hz S S OCR TYPE Supreme meter C X * Communication functions are Normal. (Function unavailable without control power supply) * Applicable to generator protection purpose * Voltage module of P type or more is basic. G Communication & protection Communication + Ground fault (Residual earth fault protection) Communication + Earth Leakage(Extermal CT) 0 Control voltage & frequency 1 AC/DC 110V~V, 0Hz 2 DC 24V~V, 0Hz AC/DC 110V~V, 50Hz 7 DC 24V~V, 50Hz N N OCR TYPE NORMAL V Pre-Trip Alarm * Ground fault detection is basic. (Internal CT Vector Sum system) * L,S,I,G configuration as standard (with LED indicators) V Communication & protection 1 Control voltage & frequency 1 AC/DC 110V~V, 0Hz AC/DC 110V~V, 50Hz 4I

5 U1 AL / C U0 U1 U2 U U4 U5 U U7 UVT coil rated voltage Without UVT coil AC/DC 100V ~ 10V AC/DC 200V ~ 250V DC 125V DC 24V ~ 0V DC V ~ 0V AC 80V ~ 0V AC V * UVT Delay module is available over AC / DC V Character AL A1 A A4 A5 A7 A8 A9 Option Table Option name AL1 + MRB AL1 + MRB + RES(AC110~10V) * AC private use AL1 + MRB + RES(DC110~125V) * DC private use AL1 + MRB + RES(AC200~250V) ** AC private use AL1 + MRB + Auto Reset AL1 + MRB + RES(DC110~125V) + Auto Reset * DC private use AL1 + MRB + RES(AC200~250V) + Auto Reset * AC private use AL1 + MRB + RES(AC110~10V) + Auto Reset * AC private use C C COUNTER **AH only B B On/Off Button lock M MI Mechanical interlock **AH only D DI or MOC Mechanism operated cell switch K K1 Key Lock K2 K2 Key Interlock Set R RCS Ready to Close switch T TM Temperature Monitoring **AH only H1 H2 H H4 H5 H H7 SHT2 Note 1) AC/DC 100V ~ 10V AC/DC 200V ~ 250V DC 125V DC 24V ~ 0V DC V ~ 0V AC 80V ~ 0V AC V Note 1) UVT and SHT2 can not be selected together, Select one of two. Note 2) Codes for over 5 optional accessories are composed separately N01 N02 N0 N04 N05 A4 (AL1 + MRB + RES(AC200~250V))+C(Counter)+B(ON/OFF Button Lock) +K(Key Lock)+R(Ready to Close switch)+m(mechanicl Interlock)+E(Spring Auto Release) AL (AL1 + MRB)+K(Key Lock(OFF Lock))+R(Ready to Close switch)+d(door Interlock or MOC) +H1(AC/DC 100V ~ 10V, Double Shunt coil)+e(spring Auto Release) C(Counter)+B(ON/OFF Button Lock)+K2(Key Interlock Set)+R(Ready to Close switch)+t(temperature Monitoring) A4(AL1 + MRB + RES(AC200~250V))+B(ON/OFF Button Lock)+K(Key Lock(OFF Lock))+M(Mechanical Interlock) +T(Temperature Monitoring) A1(AL1+MRB+RES110~10V)+B(ON/OFF Button Lock)+K(Key Lock(OFF Lock))+R(Ready to Close switch)+m(mechanical Interlock)+T(Temprature Monitoring)Interlock)+T(Temprature Monitoring) AN / AH / AR - 1 C 10 J Automatic circuit breaker AN/AH AR Ampare Frame E(CT Spec.) AF 1 100AF AF Phasing C : 800~100AF /4P Standard (N)RST V : 800~100AF 4P Reversed RST(N) Poles : P(C) 4 : 4P(C,V) Rated current 00 None A 0 0A A A A J S T Connections Drawout Bottom operating (Auto Connect) Bottom operating Side operating (Auto Connect) Side operating AF A Fixed 1 100A H Horizontal terminals 00 None V Vertical terminals A M Horizontal for line, Vertical for load 0 0A N Vertical for line, Horizontal for load A P Front terminal A Z Horizontal with speaders * 1) AR can be selected up to Ampere Frame 1000AF. * 2) AR can be selected up to 1000AF(CT Spec.) R T Vertical with spreaders Front connection via vertical connection adapters fitted with cable-lug adapter X Cable Lug I 5

6 Electrical diagram Internal / External wiring (by customer) Connector of the control circuit terminal of drawout type V1 Voltage Module Temperature Power supply Module ZSI Output ZSI Input Reset Common ACB This diagram is based on CONNECTED position of a circuit breaker and Opening, Motor charging, Releasing of locking plate should be normal condition. ZCT V2 V VN E1 Z Z1 5+ R11 R22 51 R2 R /RES(+) D1 C11 C1 A1 U2 U Trip relay UVT SHT2 SHT1 CC M Temperature Sensor-1 Temperature Sensor-2 or E2 Z4 Z /RES(-) D2 C12 C2 A2 U Main circuit Digital trip relay Alarm Contact Ready to close Electrical operation circuit Secondary trip coil Charge completion contact Auxiliary switch Thermal, communication remote control module UVT ON T1 TC1 T2 TC2 OFF OFF ON Charged OFF Terminal code description Accessory code description U1 U1 A1 C U2 U4 A2 C2 ~ ~ 42 Auxiliary switch "b" contact Auxiliary switch "a" contact Charge completion signal Motor charging Closing coil Shunt trip D1 D2 C11 C12 2nd shunt trip R11 R22 Alarm reset (Trip cause LEDs, contacts) R1 51 ~ R2 514 Voltage input terminal of UVT coil Alarm1 "b" contact Alarm2 "b" contact or RES Coil Ready to close switc Control power for trip unit Fault cause indication contacts 5+ Z1 Z E1 VN TC1 5- ~ ~ Z2 Z4 E2 TC2 V ~ T1 T2 Note) 1. The diagram is shown with circuit de-energized, all devices open and charged and relays in normal position 2. Relay is normal condition and charging type is "Off-Charging". The standard of auxiliary contact is 4C. The auxiliary switch in above diagram is composed of 4C. See page for more detail on auxiliary switches. 4. Option - Ready to close contact, Trip alarm contact, UVT coil, Fully charged contact, secondary trip coil - Temperature module, Voltage module, ZCT, ZSI 5. Please consult us for the use of ZSI (Zone selective Interlocking).. Refer to the page for the connection of Trip relay and the page 4 for UVT. 7. For connecting RS-5 verify if the polarity is correct RS-5 communication ZSI input ZSI output ZCT Voltage module Temperature module Cell switch Ax LTD STD/Inst GTD CL1~CL4 M CC SHT1 SHT2 UVT Auxiliary switch Long time delay trip indicator Short time delay/instantaneous Ground fault trip indicator Cell switch Motor Closing coil 1st Shunt coil 2nd Shunt coil UVT coil I

7 Trip Coil Supervision(Option) C1 A1 U2 U SHT1 CC M C2 A2 U Electrical operation circuit Charge completion contact Auxiliary switch OFF ON CL4 (DISCON) or CL4 (TEST) CL (TEST) CL2 (CONNECTED) CL1 (CONNECTED) CL8 (DISCON) CL7 (TEST) OFF ON Charged OFF ON CL (CONNECTED) CL5 (CONNECTED) Axc Axc Axc Axc Cell switch 4C Cell switch 8C (4C Addition) MOC (Mechanical Operated Cell switchs) Terminal code description ~ ~ Cell switch MOC Note) 8. Contact configuration for Cell Switch can be changeable if necessary I 7

8 Accessories Main ACB ACB Trip Relay(OCR) Under Voltage Trip Device(UVT) Auxiliary Switch(AX) Miss Insertion Preventing Device Motor(M) Ready to Close switch(rcs) Key Lock(K1) (MIP) Closing Coil(CC) Door Interlock(DI) Counter(C) Manual Reset Button(MRB) Shunt Coil(SHT) Mechanical Operated Cell SW(MOC) ON/OFF Button Lock(B) Cradle Cradle Safety Shutter(ST) Mechanical Operated Cell SW(MOC) OCR Tester(OT) Remote Close Open(RCO) Insulation Barrier(IB) Miss Insertion Prevent Device(MIP) Dust Cover(DC) Lifting Hook(LH) Cell SW(CEL) Racking Interlock & Position Lock(RI) Door Frame(DF) Door Interlock(DI) Condensor Trip Device(CTD) UVT Time Delay Controller(UDC) 8I

9 Structure Lower type cradle (Main-Type) Side bracket (Lower type) [ Compact ACB 100A Cradle Structure ] I 9

10 Dimensions Fixed Type (Front view) AN/AH/AR-C P/4P Fixed Type(Horizontal type) AN/AH/AR-C P R Fixed Type(Horizontal type) AN/AH/AR-C 4P R I

11 Fixed Type(Front view) AN/AH/AR-C P/4P Fixed Type(Vertical Type) AN/AH/AR-C P R Fixed Type(Vertical Type) AN/AH/AR-C 4P R I 11

12 Dimensions Draw-out Type(Front view) AN/AH/AR-C P/4P Draw-out Type(Horizontal type) AN/AH/AR-C P 12Ｉ 18.5 Disconnected 4.5 Test Disconnected18.5 Disconnected 4.5 Test 4.5 Test Disconnected 18.5 Disconnected 4.5 Test 4.5 Test Disconnected Test Draw-out Type(Horizontal type) AN/AH/AR-C 4P (Insul bar

13 Draw-out Type(Front view) AN/AH/AR-C P/4P 18.5 Disconnected 4.5 Test 18.5 Disconnected Test Disconnected18.5 Disconnected 4.5 Test 4.5 Test 18.5 Disconnected 18.5 Disconnected 4.5 Test 4.5 Test Draw-out Type(Vertical Type) AN/AH/AR-C 4P Draw-out Type(Vertical Type)AN/AH/AR-C P Ｉ 1 (Insulati barrier

14 MEMO 14I

15 I

16 Head Quarter 127 LS-ro (Hogye-dong) Dongan-gu, Anyang-si, Gyeonggi-Do, 119, Korea Tel , 4, 29 Fax: Overseas Subsidiaries LSIS(Dalian) Co., Ltd. (Dalian, China) Tel: Fax: LSIS(Wuxi) Co., Ltd. (Wuxi, China) Tel: Fax: LS VINA Industrial Systems Co., Ltd (Hanoi, Vietnam) Tel: Fax: LSIS Middle East FZE (Dubai, U.A.E.) Tel: Fax: LSIS Europe B.V. (Amsterdam, Netherlands) Tel: Fax: LSIS Japan Co., Ltd. (Tokyo, Japan) Tel: Fax: LSIS USA Inc. (Chicago, U.S.A) Tel: Fax: Overseas Branches LSIS Shanghai Office (China) Tel: Fax: LSIS Beijing Office (China) Tel: Fax: LSIS Guangzhou Offce (China) Tel: Fax: LSIS Qingdao Office (China) Tel: Fax: LSIS Chengdu Office (China) Tel: Fax: LSIS ShenYang Office (China) Tel: Fax: LSIS Jinan Office (China) Tel: Fax: LSIS Co., Ltd. Tokyo Office (Japan) Tel: Fax: LSIS Co., Ltd. Rep. Office (Vietnam) Tel: LSIS Moscow Office (Rossia) Tel: Fax: LSIS Jakarta Office (Indonesia) Tel: Specifications in this catalog are subject to change without notice due to c7. 5 LSIS Co.,Ltd. All rights reserved. / English (01) Staffcom continuous product development and improvement.

Contents. Compact ACB 1600A. Ratings 03 Ordering 04 Electrical diagram. 06 Accessories 08 Structure 09 Dimensions 10

Contents. Compact ACB 1600A. Ratings 03 Ordering 04 Electrical diagram. 06 Accessories 08 Structure 09 Dimensions 10 Compact ACB 100A Contents Compact ACB 100A Ratings 0 Ordering 04 Electrical diagram 0 Accessories 08 Structure 09 Dimensions 10 Compact ACB 100A Main Characteristics Rated current : Cat.A ~1000A, (Ics: