Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan
|
|
|
- Andrew Glenn
- 5 years ago
- Views:
Transcription
1 Accreditation No: Awarded to Attock Refinery Limited, Rawalpindi, Pakistan The scope of accreditation is in accordance with the standard specifications outlined in the following page(s) of this document. The accredited scope shall be visible and legible in areas such as customer service, sample-receiving section etc and shall not mislead its users. The accreditation was first time granted on by Pakistan National Accreditation Council The laboratory complies with the requirements of ISO/IEC 17025:2005. The accreditation requires regular surveillance, and is valid until The decision of accreditation made by Pakistan National Accreditation Council implies that the organization has been found to fulfill the requirements for accreditation within the scope. The organization however, itself is responsible for the results of performed measurements/tests. PAKISTAN NATIONAL ACCREDITATION COUNCIL General Page 1 of 14
2 Testing Laboratory. Accreditation Scope of Attock Refinery Limited, Rawalpindi, Pakistan Permanent laboratory premises X Materials/Pr oducts tested Testing field (e.g. environmental testing or mechanical testing) Types of test/ Properties measured Reference to standardized method (e.g. ISO :2003)/ Internal method reference Export Naphtha Petroleum Testing Distillation ASTM D Petroleum Testing Distillation ASTM D Premium Motor Gasoline (PMG) Petroleum Testing Reid Vapour Pressure ASTM D Petroleum Testing Research Octane No. ASTM D a Page 2 of 14
3 Petroleum Testing Aromatics ASTM D Petroleum Testing Sulfur Content ASTM D Petroleum Testing Distillation ASTM D JP-1 / JP-8 Petroleum Testing Flash Point ABLE IP Petroleum Testing Density ASTM D b Petroleum Testing Freezing Point ASTM D Petroleum Testing Viscosity -20 C ASTM D445-15a ASTM D Petroleum Testing Existent Gum ASTM D Page 3 of 14
4 Petroleum Testing Water Separometer Index ASTM D Petroleum Testing Total acidity ASTM D Petroleum Testing Electrical Conductivity ASTM D Petroleum Testing Distillation ASTM D Kerosene Petroleum Testing Flash Point ABLE IP High Speed Diesel (HSD) Petroleum Testing Cloud Point ASTM D ASTM D Petroleum Testing Pour Point ASTM D97-16 Page 4 of 14
5 Petroleum Testing Distillation ASTM D Petroleum Testing Colour ASTM D Petroleum Testing Flash Point PMCC ASTM D93-15a Petroleum Testing Sulfur Content ASTM D Petroleum Testing Kin Viscosity, 40 C ASTM D445-15a ASTM D Petroleum Testing Water Content ASTM D95-13 Jute Batching Oil (JBO) Petroleum Testing Color ASTM ASTM D Petroleum Testing Flash Point PMCC ASTM D93-15a Page 5 of 14
6 Diesel Fuel Oil (DFO) Petroleum Testing Kin Viscosity, 37.8 C ASTM D445-15a Petroleum Testing Flash Point PMCC ASTM D93-15a Petroleum Testing Kin Viscosity, 50 C ASTM D445-15a Furnace Fuel Oil (FFO) Petroleum Testing Flash Point PMCC ASTM D93-13 Petroleum Testing Water Content ASTM D95-13 Petroleum Testing Pour Point ASTM D97-16 Page 6 of 14
7 Petroleum Testing Sulphur Content ASTM D Petroleum Testing Ductility ASTM D Petroleum Testing Flash Point COC ASTM D92-12b Bitumen Petroleum Testing Loss on Heating ASTM D6 95 Petroleum Testing Penetration ASTM D Waste Water Testing Chemical Oxygen Demand (COD) HACH DR/870 Colorimeter, 02/99 1Edition Waste Water Testing Biological Oxygen Demand (BOD) Instruction manual BOD TRAK-II/02/2010/ Edition 2 Refinery Waste Water Waste Water Testing Total Dissolved Solids (TDS) USEPA Waste Water Testing Total Suspended Solids (TSS) USEPA Page 7 of 14
8 All Petroleum Products Petroleum Products Sampling Sampling from Tanks ASTM D Calibration Laboratory Accreditation Scope of Attock Refinery Limited, Rawalpindi, Pakistan Permanent laboratory premises X Field of measurement: Measured quantity Range Calibration & Measurement Capability (CMC) expressed as an uncertainty ( + ) Field of measurement: (i) TEMPERATURE MEASUREMENTS 155~170 C C Brief description of measurement and equipment used ASTM E1-14 & ASTM 80~130 F F ASTM E1-14 & ASTM 0~+300 C C ASTM E1-14 & ASTM Page 8 of 14
9 23~25 C C ASTM E1-14 & ASTM 60~160 F F ASTM E1-14 & ASTM 0~+400 C C ASTM E1-14 & ASTM -80~+20 C C ASTM E1-14 & ASTM Page 9 of 14
10 -50~+5 C C ASTM E1-14 & ASTM ASTM E1-14 & ASTM 23~25 C C 0~370 C C ASTM E1-14 & ASTM 20~230 F F ASTM E1-14 & ASTM Page 10 of 14
11 -38~+50 C C ASTM E1-14 & ASTM 34~42 C C ASTM E1-14 & ASTM -2~+80 C C ASTM E1-14 & ASTM -20~102 C C ASTM E1-14 & ASTM Page 11 of 14
12 58.6~61.4 C C ASTM E1-14 & ASTM 119.5~124.5 F F ASTM E1-14 & ASTM 38.6~41.4 C C ASTM E1-14 & ASTM 97.5~102.5 F F ASTM E1-14 & ASTM -21.4~-18.6 C C ASTM E1-14 & ASTM Page 12 of 14
13 Watch, Temperature Field of measurement: (ii) Specific Gravity Measurement Glass Hydrometer ASTM E126-13a Zeal Reference Hydrometer, Temperature Controlled Liquid Bath, Magnifying Lens, Hygrometer Cole Parmer CE china Glass Hydrometer ASTM E126-13a Zeal Reference Hydrometer, Temperature Controlled Liquid Bath, Magnifying Lens, Hygrometer Cole Parmer CE china Glass Hydrometer ASTM E126-13a Zeal Reference Hydrometer, Temperature Controlled Liquid Bath, Magnifying Lens, Hygrometer Cole Parmer CE china Glass Hydrometer ASTM E126-13a Zeal Reference Hydrometer, Temperature Controlled Liquid Bath, Magnifying Lens, Hygrometer Cole Parmer CE china Glass Hydrometer ASTM E126-13a Zeal Reference Hydrometer, Temperature Controlled Liquid Bath, Magnifying Lens, Hygrometer Cole Parmer CE china Glass Hydrometer ASTM E126-13a Zeal Reference Hydrometer, Temperature Controlled Page 13 of 14
14 Liquid Bath, Magnifying Lens, Hygrometer Cole Parmer CE china Glass Hydrometer ASTM E126-13a Zeal Reference Hydrometer, Temperature Controlled Liquid Bath, Magnifying Lens, Hygrometer Cole Parmer CE china Field of measurement: (iii) Mass Mass 0.1 mg 210g NATA Technical Note 13- User checks and maintenance of laboratory balances NMI Monograph 4, The Calibration of Weights and Balances, E Morris and K Fen, Australian Government National Measurement Institute Standard Weights Comparison, Forceps. Page 14 of 14
Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan.
Issue : 10/08/15 Accreditation No: Awarded to Attock Refinery Limited, Rawalpindi, Pakistan. The scope of accreditation is in accordance with the standard specifications outlined in the following page(s)
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY & ON-STREAM ANALYSER DIVISION, SAUDI ARAMCO TOTAL REFINING AND PETROCHEMICAL COMPANY LAB & OSA Division Saudi Aramco Total Refining and Petrochemical
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,
Regional Laboratory, Indian Oil Corporation Limited, Korukkupet Terminal, Kathivakkam High Road, Chennai, Tamil Nadu
Regional, Indian Oil Corporation Limited, Korukkupet Last Amended on 07.01.2014 Page 1 of 5 Specific Method Specification against Range of ing / I. PETROLEUM PRODUCTS 1. JetA1, JP5 Acidity, Total P-113
Supply of Services for Detailed OEB Crude Assay Analysis
Tender Number [9900009229] Supply of Services for Detailed OEB Crude Assay Analysis SCOPE OF WORK SCOPE OF WORK 1. Introduction Orpic is the brand name for Oman Oil Refineries and Petroleum Industries
Specifications Of Straight Run Naphtha for Exportation
Specifications Of Straight Run Naphtha for Exportation ASTM Specific Gravity @ 60/60 F 1298 160 0.690-0.730 Colour VISUAL Colourless R.V.P @ 100 F kg/cm2 max 323 69 0.07 Sulphur, Total %mass max 1266 107
Multi-Parameter Certified Reference Material
Multi-Parameter Certified Reference Material MPCRM s are premium level, dual certified reference materials certified in accordance with both ISO 17025 and ISO Guide 34 under our UKAS accreditation. They
Annex no. 1 of Accreditation Certificate no. LI 333 from
Valid from 04.02.2008 to 04.02.2012 Oil Products Laboratory DJ No. 226, Nvodari, Constana county belonging to SC ROMPETROL QUALITY CONTROL SRL 1 2 3 4 Physical tests 1. Determination of the density with
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
Accreditation No: LAB 007. SGS Consumer & Retail Services - Laboratory H-3/3, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan.
F-0602 Issue : 100815 Accreditation No: Awarded to SGS Consumer & Retail Services - Laboratory H-33, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan. The scope of accreditation is in accordance
एमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018. Page 1 of 17
एमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ २०१८ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018 Page 1 of 17 INDIAN STANDARD (IS) SPECIFICATION FOR DOMESTIC PRODUCTS: 2018 S. No Product Name Specification
International Quality Assurance Exchange Program Schedule. Fuel Month Number Type Dispatch Date Closing Date
Fuel 2018 Month Number Type Dispatch Date Closing Date January February March April May June July August September October November December M902 Motor Gasoline, Premium A372 Aviation Gasoline, 100LL D295
एमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018. Page 1 of 16
एमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ २०१८ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018 Page 1 of 16 INDIAN STANDARD (IS) SPECIFICATION FOR DOMESTIC PRODUCTS: 2018 S. No Product Name Specification
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SGS West Thurrock Laboratory Contact: David Mercer (Laboratory Manager) 859 London Road Tel: +44 (0)1708 681943 West Thurrock Fax: +44 (0)1708
On-Line NIR Analysis for Blending
Application Note On-Line NIR Analysis for Blending Introduction Gasoline and Diesel blending is a refinery operation that blends different component streams into various grades of final product. The main
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Prenton Way Contact: Dr J Roberts North Cheshire Trading Estate Tel: +44 (0)151 649 9955 Prenton Fax: +44 (0)151 649 9977 Wirral E-Mail:
एमआरप एल ग णव नय ण य गश ल उप दन व श:२०१७ MRPL QC LABORATORY
एमआरप एल ग णव नय ण य गश ल उप दन व श:२०१७ MRPL QC LABORATORY PRODUCTS SPECIFICATIONS:2017 INDIAN STANDARD (IS) SPECIFICATIONS FOR DOMESTIC PRODUCTS: 2017 S.No Product Name Specification Number 1 Liquefied
PETROLEUM PRODUCTS INSPECTION OPERATIONS MANUAL
Kenya Bureau of Standards PETROLEUM PRODUCTS INSPECTION OPERATIONS MANUAL 2016-01-14 Version 2.0 Page 1 1.0 INTRODUCTION 1.1 Purpose and Background This manual provides a frame work for inspection of petroleum
Paragon Scientific Ltd Proficiency Testing Scheme Schedule
Paragon Scientific Ltd Proficiency Testing Scheme Schedule Proficiency Testing Scheme Schedule Page 1 of 16 Issue : 29/01/2015 Print : 25/06/2018 Viscosity ASTM D445 - Standard Test Method for Kinematic
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
10.6 Schedule of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
Crude Assay Report. Crude Oil sample marked. Barrow Crude Oil. On Behalf Of. Chevron Australia Pty Ltd. Laboratory Supervisor. Crude Assay Chemist
Crude Assay Report on Crude Oil sample marked Barrow Crude Oil On Behalf Of Chevron Australia Pty Ltd. Reported by: Approved by: Michelle Fernandez Laboratory Supervisor Jhonas Fernandez Crude Assay Chemist
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
Certificate of Accreditation
Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L2264.03 Analysts, Inc. 2450 Hassell Road Hoffman Estates IL 60195 has met the requirements set forth in L-A-B s policies and procedures,
एमआरप एल ग णव नय ण य गश ल वष 2019 क लए प उ!प द# क लए भ रत य म नक QC LABORATORY INDIAN STANDARD FOR PETROLEUM PRODUCTS SPECIFICATION FOR YEAR 2019
एमआरप एल ग णव नय ण य गश ल वष 2019 क लए प उ!प द# क लए भ रत य म नक MRPL QC LABORATORY INDIAN STANDARD FOR PETROLEUM PRODUCTS SPECIFICATION FOR YEAR 2019 Page 1 of 15 BUREAU OF INDIAN STANDARDS (BIS) SPECIFICATION
ANNEX 2, REFERENCE FUELS
ANNEX 2, REFERENCE FUELS A.2.1. A.2.1.1. EUROPE, INDIA, SOUTH AFRICA Petrol (E5) Parameter Unit Limits (1) Test method Research octane number, RON 95.0 EN 25164 pren ISO 5164 Motor octane number, MON 85.0
Crude & Petroleum Products Specification & Analysis
Training Title Crude & Petroleum Products Specification & Analysis Training Duration 5 days Training Venue and Dates Crude & Petroleum Products Specification & Analysis 5 04-08 November $3,750 Abu Dhabi
Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
ISBN SANS 342:2006 Edition 4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan roa
ISBN 0-626-18752-4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344
ANNEX 3 REFERENCE FUELS. Parameter Unit Limits (1) Test method Minimum Maximum Research octane number, RON
WLTP-2012-018 Annex 3 Draft Reference fuels 03.06.2012 ANNEX 3 REFERENCE FUELS The reference fuel specifications listed in this annex are those that are to be used for the WLTP Validation 2 exercise and
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009
SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009 DCG PARTNERSHIP 1, LTD. 4170 A South Main Pearland, TX 77581 Louis D Agostaro Phone: 281-648-1894 Ext. 201 REFERENCE MATERIAL PRODUCER Valid To: November 30,
GB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB18351-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 18351-2015 Replacing
PRICE LIST 2017/2018
PRECISION PETROLEUM LABS, INC. 5915 STAR LANE HOUSTON, TX 77057 PRICE LIST 2017/2018 PH: 713-680-9425 Fax: 713-680-9564* WEBSITE: PRECISIONLABS.ORG FUEL TESTING Acidity as Acetic Acid D-1613 $65.00 Alcohol
10.6 Scope of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
National Oil Corporation Libyan Petroleum Institute. Crude oil assay Sarir crude oil
National Oil Corporation Libyan Petroleum Institute Crude oil assay Sarir crude oil Work Order No. LPI- 00344/10/IL02/2008 Client: National Oil Corporation Date of Issue: Dec., 2008 Prepared by: Industrial
Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Unit A Shears Way Brooklands Close Sunbury-on-Thames Middlesex TW16 7EE Contact: Mr Craig Stone Tel: +44 (0)1932 732103 Fax: +44 (0)1932 732113 E-Mail: craig.stone@intertek.com Website: SUMMARY OF ACCREDITATION
10.6 Scope of Accreditation
Testing Laboratory Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration
EAST AFRICAN STANDARD. Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY. HS (regular); HS
EAST AFRICAN STANDARD Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY HS 2710.11.10(regular); HS 2710.11.10(premium) ICS 75.160.20 EAS 2011 Second Edition 2011 ii Table
Carl Stuart Ltd. Tallaght Business Park, Whitestown, Dublin 24. Calibration Laboratory Registration number: 270C
Tallaght Business Park, Whitestown, Dublin 24 Calibration Laboratory Registration number: 270C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in the Schedule bearing
ALL TESTS. Density Oscillating U-tube method * IP 365. Distillation characteristics of petroleum products - Micro distillation method IP 596
Tests marked * are ISO17025 accredited ALL TESTS TEST NAME Density Oscillating U-tube * IP 365 Distillation characteristics of petroleum products - Micro distillation IP 596 Mercaptans, hydrogen sulphide,
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Nordic Camp Supply Kabul (HKIA) Fuel Testing
Warter Fuels JSC Aviation Gasoline AVGAS 115/145 Edition II
1. Scope of TS 2. Usage scope of TS subject 3. Division and designation 4. Requirements and research 4.1. General properties 4.1.1. Antiknock additives 4.1.2. Dyeing additives 4.1.3. Antioxidant additives
GB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB17930-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2013 Replacing
SCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION InnoTech Alberta Inc.
10.6 Schedule of Accreditation
Testing Laboratory is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration laboratories
DRAFT EAST AFRICAN STANDARD
ICS 75.160.20 DRAFT EAST AFRICAN STANDARD Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY EAC 2018 Third Edition 2018 Copyright notice This EAC document is copyright-protected
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33225-9 SOUTH AFRICAN NATIONAL STANDARD Automotive fuels Requirements and test methods for diesel WARNING This document references other documents normatively. Published by SABS Standards
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
Warter Fuels JSC Aviation Gasoline AVGAS 100LL Edition VIII
1. Scope of TS 2. Usage scope of TS subject 3. Division and designation 4. Requirements and research 4.1. General properties 4.1.1. Antiknock additives 4.1.2. Dyeing additives 4.1.3. Antioxidant additives
GB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB17930-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2016 Replacing
Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 20281 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.08.2016 to 30.08.2021 Holder of certificate: Deutsche
MUTINEER EXETER CRUDE OIL. Santos Limited
Crude Assay Job Number 08-January-2015 43.1 API 0.10 mgkoh/g TAN 0.038 %m Sulphur 11.8 K Factor on behalf of Santos Limited :Report By Approved By: Joshua Camens Lab. Supervisor Jhonas Fernandez Lab. Manager
National Oil Corporation Libyan Petroleum Institute. Crude Oil Assay Messla Crude Oil
National Oil Corporation Libyan Petroleum Institute Crude Oil Assay Messla Crude Oil Work Order No. LPI- 00344/08/IL02/2008 Client: National Oil Corporation Date of Issue: Nov., 2008 Prepared by: Industrial
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METTLER TOLEDO (INDUSTRIAL) 1900 Polaris Parkway Columbus, OH 43240 Frank Gardone Phone: 412 213 2263 CALIBRATION Valid To: April 30,
Table of Contents. Copyright and Trademarks 5. Copyright 5 Revision 5 Disclaimer of Liability 5 Copy and Use Restrictions 5.
Table of Contents Copyright and Trademarks 5 Copyright 5 Revision 5 Disclaimer of Liability 5 Copy and Use Restrictions 5 Introduction 6 Blending Quality Models Equations 7 Overview 7 Common Terms 7 Density
SOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-18752-4 SANS 342:2006 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METTLER TOLEDO (INDUSTRIAL) 1900 Polaris Parkway Columbus, OH 43240 Frank Gardone Phone: 412 213 2263 CALIBRATION Valid To: April 30,
Draft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION
Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard Doc:PCD 3(2537)C September 2012 SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Not to be reproduced without the permission
ISO/TC 28 Plenary Meeting. Delft, settembre Riunione Plenaria Unichim 8 Novembre 2016, UNI
ISO/TC 28 Plenary Meeting Delft, 26-30 settembre 2016 Davide Faedo ISO/ TC 28 Title and scope ISO/TC 28 Petroleum products and related products of synthetic or biological origin ISO/TC 28 Petroleum products
Exceeding Expectations
Technical Notes # 028 Linear vs. Non-Linear that is the question Exceeding Expectations When blending, it is important to understand whether the specification you are blending for is linear or non-linear
FINAL DRAFT BELIZE STANDARD SPECIFICATION FOR UNLEADED GASOLINE FOR MOTOR VEHICLES. ooooooooooooooooooooo
ISSUED FOR COMMENTS ONLY oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo FINAL DRAFT BELIZE STANDARD SPECIFICATION FOR UNLEADED GASOLINE FOR MOTOR VEHICLES ooooooooooooooooooooo
ANNEX 18. RESOLUTION MSC.150(77) (adopted on 2 June 2003)
RESOLUTION MSC.150(77) (adopted on 2 June 2003) RECOMMENDATION FOR MATERIAL SAFETY DATA SHEETS FOR MARPOL ANNEX I CARGOES AND MARINE FUEL OILS THE MARITIME SAFETY COMMITTEE, RECALLING Article 28(b) of
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 QUALITY CONTROL SERVICES, INC. 2340 SE 11 th Avenue Portland, OR 97214 George Cahill Phone: 503 236 2712 CALIBRATION Valid To: September
Standard Diesel & FCC Additive Technical Analysis on Lubricity
Revision A Standard Diesel & FCC Additive Technical Analysis on Lubricity ADDF-REP-TA-0002 Michelle Lam Disclaimer: The content of this technical shall only summarise the information and results provided
Fuel oils Specification
TANZANIA STANDARD CDC15 (4029)P3 (Rev. of TZS 673:2014) Fuel oils Specification 0 Foreword This Tanzania Standard was prepared under the direction of Petroleum and Petroleum Products Technical committee,
Certificate of Accreditation
PERRY JOHNSON LABORATORYACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
Ceiba Crude (31.44 API, Sul WT%)
Ceiba Crude (31.44 API, 0.398 Sul WT%) Crude Name: Ceiba Crude API Gravity API 31.44 Component Wt % Vol % Crude ID: CEIBA2015 Density @15 deg C KG/L 0.8679 C2 Minus 0.004 0.01 Country: Equatorial Guinea
Shriram Institute For Industrial Research, 14-15, Sadarmangala Industrial Area, Whitefield Road, Bangalore, Karnataka
Certificate Number CC-2083 (in lieu of C-0216, C-0304, C-1497) Page 1 of 7 ELECTRO-TECHNICAL CALIBRATION I. MEASURE 1. Time $ 5 sec to 9900 sec 0.12 sec to 5.8 sec Using Digital Time Totalizer (Digital
Tung Xiao Dan Assistant Chemist Mark Tan Section Head Feedstock Evaluation Department
Sample ID : Lab ID : Date : Client : Chim Sao Crude 2014-FED-051699 01 October 2014 Premier Oil Sample Number : Sample Date : Sample Time : Location : 4/4 10/9/2014 1500hrs Run Down Reported by : Approved
Softening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer
Softening point by Ring & Ball Density and relative density of liquids by Hubbart pycnometer Distillation of petroleum Melting point of petroleum wax Precipitation number of lubricating oils Saponification
Production of Biodiesel from Used Groundnut Oil from Bosso Market, Minna, Niger State, Nigeria
Production of Biodiesel from Used Groundnut Oil from Bosso Market, Minna, Niger State, Nigeria Alabadan B.A. Department of Agricultural and Bioresources Engineering, Federal University, Oye Ekiti. Ajayi
Various tests and analysis will be carried out at testing laboratory on the received samples such as:
2 Testing Various tests and analysis will be carried out at testing laboratory on the received samples such as: - General Quality Control Test - Special Analysis Tests as requested 2.1 General Quality
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 EUSTIS CO., INC./PYROCOM CALIBRATION LAB 12407-B Mukilteo Speedway Lynnwood, WA 98087 Bill LeMesurier Phone: 425 423 9996 CALIBRATION
D ISM Lubricant Performance Test. Report Packet Version No. Method. Conducted For:
D 7468 - ISM Lubricant Performance Test Report Packet Version No. Method Conducted For: V = I = N = Valid; The reference oil / non-reference oil was evaluated in accordance with the test procedure. Invalid;
On-Line Process Analyzers: Potential Uses and Applications
On-Line Process Analyzers: Potential Uses and Applications INTRODUCTION The purpose of this report is to provide ideas for application of Precision Scientific process analyzers in petroleum refineries.
Conversion of Peanut Oil into Jet and Diesel Fuels. Panama City, Florida 22 July 2016 Edward N. Coppola
Conversion of Peanut Oil into Jet and Diesel Fuels Panama City, Florida 22 July 2016 Edward N. Coppola SOLVING PROBLEMS OF GLOBAL IMPORTANCE About ARA, Inc. Founded 1979, Albuquerque, New Mexico 1,086
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that EPA National Vehicle and Fuel Emissions Laboratory
On-Line NIR Analysis of Crude Distillation Unit
Application Note On-Line NIR Analysis of Crude Distillation Unit Introduction Petroleum refining is the process of separating the many compounds present in crude petroleum. The principle which is used
Fig:1.1[15] Fig.1.2 Distribution of world energy resources. (From World Energy Outlook 2005, International Energy Agency.)[16,17]
![Fig:1.1[15] Fig.1.2 Distribution of world energy resources. (From World Energy Outlook 2005, International Energy Agency.)[16,17]](/thumbs/89/100738047.jpg "Fig:1.1[15] Fig.1.2 Distribution of world energy resources. (From World Energy Outlook 2005, International Energy Agency.)[16,17]")
Introduction :Composition of petroleum,laboratory tests,refinery feedstocks and products Fig:1.1[15] Fig.1.2 Distribution of world energy resources. (From World Energy Outlook 2005, International Energy
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NORTHERN BALANCE AND SCALE, INC. 9556 W. Bloomington Freeway Bloomington, MN 55431 Joey Kaluser Phone: 952 881 7716 CALIBRATION Valid
Petro Solutions. Analytical Instruments for the Petrochemical Industry
Petro Solutions Analytical Instruments for the Petrochemical Industry Analytical Excellence Petrochemical Analytical Instruments for Accurate and Compliant Analyses From crude to gasoline, diesel, liquid
Index 1. ISO 8217 :
Index 1. ISO 8217 : 2010... 2 a. MARINE DISTILLATE FUELS... 2 b. MARINE RESIDUAL FUELS...3 2. ISO 8217 : 2005... 4 a. MARINE DISTILLATE FUELS... 4 b. MARINE RESIDUAL FUELS Grades 30, 80, 180 mm 2 /s (cst)...
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022
HQCEC has contracted KBC to obtain an assessment of future market and market pricing. The market study results have been used as the basis of study.
3 STUDY BASIS 3.1 Production goals of the refinery SERESCO is studying the feasibility of expanding the Refinery, and the associated utilities to support a capacity of 400 m 3 /h (60,000 barrels per day
AGREEMENT CONCERNING THE ADOPTION OF UNIFORM CONDITIONS OF APPROVAL AND RECIPROCAL RECOGNITION OF APPROVAL FOR MOTOR VEHICLE EQUIPMENT AND PARTS
E/ECE/TRANS/505A Rev.1/Add.39 /Amend.1 18 May 1988 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM CONDITIONS OF APPROVAL AND RECIPROCAL RECOGNITION OF APPROVAL FOR MOTOR VEHICLE EQUIPMENT AND PARTS done
COLOMBIA. 2. Vehicle categories: 2.1. Categories for application with European limits. M = Passenger vehicle N = Commercial vehicle
COLOMBIA COLOMBIA 1. Introduction: American and European emissions limits, with respective test cycles, are applied. There are no emissions laboratories in, because of this test reports carried out by
REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST
REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST 51858-2002 Characteristics Units Result Test Method Density (Specific Gravity) @ 20 C g /sm 3 0.870 ASTM D5002 Sulphur Content wt.% 1.8 ASTM D4294
BQ-9000 Quality Management System. Accredited Producer Requirements
BQ-9000 Quality Management System Accredited Producer Requirements Revision 4 Effective Date: February 1, 2007 This requirements document has been prepared by the National Biodiesel Accreditation Commission,
Alberta Innovates - Technology Futures ~ Fuels & Lubricants
Report To: 5 Kings College Road Toronto, Ontario, M5S 3G8 Attention: Curtis Wan E-mail: curtis.wan@utoronto.ca Fax: Alberta Innovates - Technology Futures ~ Fuels & Lubricants 250 Karl Clark Road, Edmonton,
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that has been assessed by ANAB and meets the requirements
The Significance of Tests. Petroleum Products. A Report Prepared by A.S.T.M. COMMITTEE D-2. On Petroleum Products and Lubricants PUBLISHED BY
The Significance of Tests of Petroleum Products A Report Prepared by A.S.T.M. COMMITTEE D-2 On Petroleum Products and Lubricants 865.5 ASIZs PUBLISHED BY AMERICAN SOCIETY FOR TESTING MATERIALS 260 S. Broad
PETROLEUM LABORATORY TESTING AND OPERATIONS
* FM 10-67-2 Field Manual No. 10-67-2 HEADQUARTERS DEPARTMENT OF THE ARMY Washington, DC, 2 April 1997 PETROLEUM LABORATORY TESTING AND OPERATIONS Table of Contents Page PREFACE CHAPTER 1 I CHAPTER 2 I
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 EMPIRE SCALE CORPORATION d.b.a. PRECISION SCALE & BALANCE d.b.a. EMPIRE SCALE & BALANCE 140 Rotech Drive Lancaster, NY 14086 Margery
NEAT ASPHALTS 40-50, 60-70, , , , & Complies to ASTM D 946 & AASHTO M20, BS 3670 DIN 1995
NEAT ASPHALTS 4050, 6070, 80100, 85100, 120150, 180200 & 200300 Complies to 946 & AASHTO M20, BS 3670 DIN 1995 DESCRIPTION PenetrationGrade Asphalt Cement for use in the construction and maintenance of
COOPER BASIN CRUDE OIL. Santos Limited
Crude Assay Job Number 13-September-2016 43.1 API
Flow Research and Test Center. Creating resource technology for today and tomorrow.
Flow Research and Test Center Creating resource technology for today and tomorrow. "The Measurement Solutions Flow Research and Test Center in Erie is certainly one of the gems of our corporation s technological
BQ-9000 Quality Management System. Producer Requirements
BQ-9000 Quality Management System Producer Requirements Revision 5 Effective Date: February 1, 2008 2008 National Biodiesel Board This requirements document has been prepared by the National Biodiesel