10.6 Schedule of Accreditation
|
|
|
- Emily Osborne
- 5 years ago
- Views:
Transcription
1 Testing Laboratory is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration laboratories Address. Qualitas Material Testing Laboratories Qualitas Material Testing Laboratories Issue No: 3 Issue Date: 12 th March 2018 PO Box: 9035, M-15, Plot No;21, Block C, Stores 7&8, Mussafah, Abu Dhabi, United Arab Emirates. Contact: Mrs. Anila George Tel: anila@qualitasme.com Web Address: Locations where testing activities covered by the above Accreditation Standard are undertaken 1- address: PO Box: 9035, M-15, Plot No;21, Block C, Stores 7&8, Mussafah, Abu Dhabi, United Arab Emirates. For the following scope: Version: 3.2 Page 1 of 11
2 Scope: 7. Chemical Testing: 7.16 Fuels 7.81 Constituents of the environment 7.51 Foods 8. Biological Testing 8.70 Waters, including effluents Scope details are as follows: Version: 3.2 Page 2 of 11
3 TEST CATEGORY Physical Testing, Chemical Testing ITEMS, MATERIALS OR PRODUCTS TESTED SPECIFIC TESTS / PARAMETERS OR PROPERTIES, COMPONENTS, CHARACTERISTICS TESTED SPECIFICATION, STANDARD TEST METHOD OR TECHNIQUE USED Transformer Oil Appearance Visual QMTL-SOP-24 / ASTM E 2680 & D 4176 Colour ASTM D1500/12 (2017) Breakdown Voltage ASTM D /ASTM D877-13/ IEC Moisture Content IEC / ASTM D 1533/12 Dissipation Factor@ 90 C IEC C IEC Power 100 C ASTM D924/15 Acid Number ASTM D974/14 e2 Flash Point Density ASTM D97/17b ASTM D1298/12 ASTM D4052/16 Dissolved gas Analysis (DGA) ASTM D3612C/02 (2017) Interfacial tension ASTM D971/12 Pour Point ASTM D97/17 Version: 3.2 Page 3 of 11
4 Total Sulphur ASTM D4294/16e1 Corrosive Sulphur ASTM D1275 B/15 Potentially corrosive Sulphur IEC Furans IEC / ASTM D Physical Testing, Chemical Testing Diesel Appearance Visual QMTL-SOP-24 / ASTM E 2680 & D 4176 Colour ASTM D1500/12 (2017) Density/Specific Gravity ASTM D1298/12b(2017) ASTM D4052/16 Kinematic Viscosity@40 C Water Content ASTM D445/17a ASTM D95/13e1 BS & Water ASTM D2709/16 Acid Number Strong Acid Number Flash Point Total Sulphur ASTM D974/14e2 ASTM D974/14e2 ASTM D93A/16a ASTM D4294/16e1 Ash Content ASTM D482/13 Version: 3.2 Page 4 of 11
5 Distillation ASTM D86/17 CCR ASTM D189/06(2014) Cetane Index ASTM D 4737/10 (2016) Calorific Value (Gross & net) ASTM D 4868/17 Pour Point ASTM D97/17b Physical Testing, Chemical Testing Cloud Point ASTM D2500/17a Water/Wastewater ph at 25 o C APHA 4500H+ B, 22 nd edition, 2012 Conductivity at 25 o C APHA 2510 B, 22 nd edition, 2012 Oil and Grease APHA 5520 B, 22 nd edition, 2012 Total Dissolved Solids APHA 2540C, 22 nd edition, 2012 Total Suspended Solids APHA 2540D, 22 nd edition, 2012 Total Solids and Volatile Solids APHA 2540G, 22 nd edition, 2012 BOD APHA 5210D, 22 nd edition, 2012 COD APHA 5220D, 22 nd edition, 2012 Odor APHA 2150A, 22 nd edition, 2012 Colour APHA 2120B B, 22 nd edition, 2012 Version: 3.2 Page 5 of 11
6 Turbidity APHA 2130 B, 22 nd edition, 2012 Chloride Ion APHA 4500Cl B, 22 nd edition, 2012 Calcium APHA 3500Ca B, 22 nd edition, 2012 Magnesium APHA 3500 Mg B, 22 nd edition, 2012 Total Hardness(as CaCO 3) APHA 2340C, 22 nd edition, 2012 Calcium Hardness APHA 2340 B &C, 22 nd edition, 2012 Total Alkalinity APHA 2320 B, 22 nd edition, 2012 Carbonates and Bicarbonates APHA 2320 B, 22 nd edition, 2012 Free Chlorine APHA 4500Cl, 22 nd edition, 2012 Cadmium APHA 3120 B, 22 nd edition, 2012 Chromium APHA 3120 B, 22 nd edition, 2012 Cobalt APHA 3120 B, 22 nd edition, 2012 Copper APHA 3120 B, 22 nd edition, 2012 Iron APHA 3120 B, 22 nd edition, 2012 Lead APHA 3120 B, 22 nd edition, 2012 Manganese APHA 3120 B, 22 nd edition, 2012 Version: 3.2 Page 6 of 11
7 Nickel APHA 3120 B, 22 nd edition, 2012 Silver APHA 3120 B, 22 nd edition, 2012 Zinc APHA 3120 B, 22 nd edition, 2012 Calcium APHA 3120 B, 22 nd edition, 2012 Magnesium APHA 3120 B, 22 nd edition, 2012 Environmental Testing Clean Room Validation Sodium APHA 3120 B, 22 nd edition, 2012 Clean Room Validation - Airflow velocity Differential pressure test - (Containment leak/ Air pressure difference measurement) Filter Integrity (Installed filter Leakage) Airflow direction and visualization Airborne particle count for classification and test measurement Air Volume Temperature ISO 7726:1998 Humidity ISO 7726:1998 Occupational Noise level ISO :2016 Version: 3.2 Page 7 of 11
8 Indoor Air Quality Illuminance (Lx) BS EN :2011 Air borne contamination - Total Bacterial Count -Yeast and Mould ISO :2003, ISO :2003, CCFRA , 5 th Edition CCFRA , 5 th Edition Total Bacterial Count CCFRA , 5 th Edition Yeast and Mould CCFRA , 5 th Edition Temperature ISO 7726:1998 Humidity ISO 7726:1998 Occupational Noise level ISO :2016 Illuminance ( Lx) BS EN :2011 TSP, PM- 1, 2.5, 4,7, 10 BS EN 481 & BS EN :2014, Internal method QMTL/ SOP/ 147 Ammonia (NH3) Nitrogen Dioxide (NO2) Sulphur Dioxide (SO2) Total Volatile Organic Compound Carbon dioxide (CO2) Carbon monoxide (CO) Hydrogen Sulphide (H2S) Oxygen(O2) Ozone(O3) Wet Bulb temperature Formaldehyde Temperature Relative Humidity Version: 3.2 Page 8 of 11
9 Outdoor Air Quality TSPM, RSPM, PM10 BS EN :2014, Internal method QMTL/SOP/148 PM2.5 BS EN :2014, Internal method QMTL/SOP/149 Ammonia (NH3) BS EN :2015, Internal method QMTL/SOP/150 Nitrogen Dioxide(NO2) BS EN :2015, Internal method QMTL/SOP/151 Sulphur Dioxide(SO2) BS EN :2015, Internal method QMTL/SOP/152 Ozone(O3) BS EN :2015, Internal method QMTL/SOP/153 Wind speed Wind direction Rainfall Relative Humidity Temperature Solar Radiation Sensor Noise monitoring Noise monitoring ISO 1996:2016 Physical Tests Clean Waters Taste Organoleptic QMTL-SOP-23 / APHA 2160A, 22 nd Edition 2012 Biological Testing Microbial Contamination in Air Air borne contamination - Total Bacterial Count -Yeast and Mould Water / Wastewater (including clean waters, Potable, Drinking & Ice water / Ground water / Swimming Pool & Marine water) ISO :2003, ISO :2003, CCFRA , 5 th Edition CCFRA , 5 th Edition Total Bacterial (heterotrophic counts) APHA 9215D, 22 nd Edition 2012 Enumeration of Total Coliforms APHA 9222B, 22 nd Edition 2012 Enumeration of Fecal Coliforms APHA 9222D, 22 nd Edition 2012 Enumeration of Fecal Streptococci APHA 9230C, 22 nd Edition 2012 Version: 3.2 Page 9 of 11
10 Chemical Testing Food (Dairy Products/ Sea foods, Ready to eat Foods, Juices) Food Enumeration of Pseudomonas aeruginosa APHA 9213E, 22 nd Edition 2012 Heterotrophic plate count APHA 9215B, 22 nd Edition 2012 Enumeration of E. coli APHA 9222G, 22 nd Edition 2012 Detection of Legionella Spp. CCFRA 3.9.1, 5 th Edition 2003 Enumeration of Legionella ISO Total Plate Count CCFRA 1.1.1, 5 th Edition 2007 Enumeration of Yeast &Mould CCFRA 2.1.1, 5 th Edition 2007 Enumeration of Enterobacteriacae CCFRA 2.3.1, 5 th Edition 2007 Enumeration of Coliforms CCFRA 2.2.1,5 th Edition 2007 Enumeration of E. Coli CCFRA 2.4.2, 5 th Edition 2003 Detection of E. Coli O/157 AOAC Enumeration of Staphylococcus CCFRA 3.5.1, 5 th Edition 2007 Aureus Detection of Salmonella CCFRA & 3.1.5, 5 th Edition 2007 Detection of Vibrio Parahaemolyticus CCFRA 3.8.1, 5 th Edition 2007 Enumeration of presumptive Bacillus CCFRA 3.7.1, 5 th Edition 2007 Cereus Enumeration of Listeria CCFRA 3.2.1, 5 th Edition 2007 Monocytogenes Enumeration of Clostridium CCFRA 3.6.1, 5 th Edition 2007 Perfringens Moisture Internal method QMTL/SOP/202 based on AOAC methods Ash Internal method QMTL/SOP/203 based on AOAC methods Version: 3.2 Page 10 of 11
11 Fat Protein Carbohydrates Energy Internal method QMTL/SOP/204 based on AOAC methods Internal method QMTL/SOP/205 based on AOAC methods Internal method QMTL/SOP/201 based on AOAC methods Internal SOP, QMTL/SOP/33 Rev 01 based on AOAC methods(calculation) Note: the text in blue indicates the new scope OR update in the Edition of a test method in this issue of the schedule of accreditation. END Qualitas Material Testing Laboratories is recorded as issuing accredited reports to organizations in the countries listed below. This list is current at the time of issue of this schedule. United Arab Emirates Bahrain Saudi Arabia Oman Qatar Kuwait Yemen Version: 3.2 Page 11 of 11
10.6 Schedule of Accreditation
Testing Laboratory is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration laboratories
10.6 Scope of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
10.6 Schedule of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
Envirochem Testing Lab & Research Centre, Plot No. 165, Sector-25, Part-II, HUDA, Panipat, Haryana. Discipline Chemical Testing Issue Date
Last Amended on - Page 1 of 5 I. WATER 1. Potable / Drinking Temperature IS 3025 (Part 9): 1984 (RA 2006) Ambient - 50 C Turbidity IS 3025 (Part 10): 1984 (RA 2006) 1 NTU to 100 NTU Specific Conductivity
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 120 Ballymena Road Doagh Ballyclare Co Antrim Northern Ireland BT39 0TL Contact: Mr A J McMorris Tel: +44 028 9335 2691 Fax: +44 028 9335
Discipline Chemical Testing Issue Date Certificate Number T-3037 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I. AIR, GASES & ATMOSPHERE 1. Ambient Air Quality Monitoring Respirable Suspended Particulate Matter Less than 10µm or PM10 IS:5182 (Part 23):2006 5-1000 µg/m3 Respirable
Ecosteps Laboratory Pvt. Ltd., D-79, Sector-6, Noida, Uttar Pradesh. Discipline Chemical Testing Issue Date
Ecosteps Pvt. Ltd., D-79, Sector-6, Noida, Uttar Pradesh Last Amended on - Page 1 of 10 Specific Performed Method Specification Range of ing / At I. WATER 1. Potable Water/ Domestic Bore Water/ De-mineralized
10.6 Scope of Accreditation
Testing Laboratory Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration
Discipline Chemical Testing Issue Date Certificate Number T-1695 Valid Until Last Amended on - Page 1 of & 2013.
Last Amended on - Page 1 of 7 I. FOOD & AGRICULTURAL PRODUCTS 1. Food Grains Moisture AOAC (19 th Eddition): 2012, 930.15 Total Ash AOAC (19 th Eddition): 2012, 923.03 Protein AOAC (19 th Eddition): 2012,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,
Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Unit 3 Georges Farm West Buckland Near Wellington Somerset TA21 9LE Contact: Mrs Sally Bellekom Tel: +44 (0)1823 662062 Fax: +44 (0)1823 660505 E-Mail:
ČSN EN ISO ČSN ISO 4832
Testing laboratory working sites: 1 Praha 2 Brno Areál Slatina, Tuřanka 115, 627 00 Brno The laboratory is qualified to provide expert opinions and to interpret test results. The Laboratory is qualified
SAMPLING CONTAINERS & HOLDING TIMES. Parameters Method Holding Time 8 Minimum Volume Water Sampling Water Soil Water Soil Container Preservative 9
Acidity SM 2310B 14 days - - 100 ml - - 250mL P None Alkalinity (as CaCO 3) SM 2320B 14 days NS 5 100 ml - - 250mL P None Ammonia Nitrogen SM 4500NH3-D 28 days - - 100 ml - - 250mL P H 2 SO 4 Asbestos
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY & ON-STREAM ANALYSER DIVISION, SAUDI ARAMCO TOTAL REFINING AND PETROCHEMICAL COMPANY LAB & OSA Division Saudi Aramco Total Refining and Petrochemical
Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Unit A Shears Way Brooklands Close Sunbury-on-Thames Middlesex TW16 7EE Contact: Mr Craig Stone Tel: +44 (0)1932 732103 Fax: +44 (0)1932 732113 E-Mail: craig.stone@intertek.com Website: SUMMARY OF ACCREDITATION
Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
Certificate of Accreditation
Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L2264.03 Analysts, Inc. 2450 Hassell Road Hoffman Estates IL 60195 has met the requirements set forth in L-A-B s policies and procedures,
Index 1. ISO 8217 :
Index 1. ISO 8217 : 2010... 2 a. MARINE DISTILLATE FUELS... 2 b. MARINE RESIDUAL FUELS...3 2. ISO 8217 : 2005... 4 a. MARINE DISTILLATE FUELS... 4 b. MARINE RESIDUAL FUELS Grades 30, 80, 180 mm 2 /s (cst)...
Supply of Services for Detailed OEB Crude Assay Analysis
Tender Number [9900009229] Supply of Services for Detailed OEB Crude Assay Analysis SCOPE OF WORK SCOPE OF WORK 1. Introduction Orpic is the brand name for Oman Oil Refineries and Petroleum Industries
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
PRICE LIST 2017/2018
PRECISION PETROLEUM LABS, INC. 5915 STAR LANE HOUSTON, TX 77057 PRICE LIST 2017/2018 PH: 713-680-9425 Fax: 713-680-9564* WEBSITE: PRECISIONLABS.ORG FUEL TESTING Acidity as Acetic Acid D-1613 $65.00 Alcohol
Sampling kits and test suites
Shell LubeAnalyst Sampling kits and test suites Oil sampling kits and test suites Basic K1 - Transport Monitors wear & contamination Basic Plus K1+ - Transport Determines optimum drain intervals Differentials,
International Quality Assurance Exchange Program Schedule. Fuel Month Number Type Dispatch Date Closing Date
Fuel 2018 Month Number Type Dispatch Date Closing Date January February March April May June July August September October November December M902 Motor Gasoline, Premium A372 Aviation Gasoline, 100LL D295
REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST
REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST 51858-2002 Characteristics Units Result Test Method Density (Specific Gravity) @ 20 C g /sm 3 0.870 ASTM D5002 Sulphur Content wt.% 1.8 ASTM D4294
Water analysis, QC and more:
Water analysis, QC and more: photoflex THE REAL MULTI COLORIMETER Standardized and easy-to-use Sturdy and waterproof Sophisticated and versatile Environmental Protection: Fish Farming and Surface Water:
Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan
Accreditation No: Awarded to Attock Refinery Limited, Rawalpindi, Pakistan The scope of accreditation is in accordance with the standard specifications outlined in the following page(s) of this document.
Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan.
Issue : 10/08/15 Accreditation No: Awarded to Attock Refinery Limited, Rawalpindi, Pakistan. The scope of accreditation is in accordance with the standard specifications outlined in the following page(s)
Introducing Zep MicroSolve TM. Now Microorganisms Have No Place to Hide
Introducing Zep MicroSolve TM Now Microorganisms Have No Place to Hide Eliminate the Possibility of Cross-Contamination. Removes biofilm and kills its microorganisms, such as Listeria, E. coli, and Salmonella,
Specifications Of Straight Run Naphtha for Exportation
Specifications Of Straight Run Naphtha for Exportation ASTM Specific Gravity @ 60/60 F 1298 160 0.690-0.730 Colour VISUAL Colourless R.V.P @ 100 F kg/cm2 max 323 69 0.07 Sulphur, Total %mass max 1266 107
Annex to the accreditation certificate D-PL according to DIN EN ISO/IEC 17025: and council directives 90/385/EWG 2 and 93/42/EWG 3
Deutsche Akkreditierungsstelle GmbH Annex to the accreditation certificate D-PL-13422-01-02 according to DIN EN ISO/IEC 17025:2005 1 and council directives 90/385/EWG 2 and 93/42/EWG 3 Period of validity:
Physico-chemical Characterization of Water Body with Special Reference to Battery, Power Sources and Metal Plating Effluents
Current World Environment Vol. 7(1), 125-131 (2012) Physico-chemical Characterization of Water Body with Special Reference to Battery, Power Sources and Metal Plating Effluents DHANANJAY DWIVEDI 1 and
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SGS West Thurrock Laboratory Contact: David Mercer (Laboratory Manager) 859 London Road Tel: +44 (0)1708 681943 West Thurrock Fax: +44 (0)1708
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 031 Issue date: 21 ugust 2018 ccredited to Unit 7 Prince William Drive
Annex no. 1 of Accreditation Certificate no. LI 333 from
Valid from 04.02.2008 to 04.02.2012 Oil Products Laboratory DJ No. 226, Nvodari, Constana county belonging to SC ROMPETROL QUALITY CONTROL SRL 1 2 3 4 Physical tests 1. Determination of the density with
Crude Assay Report. Crude Oil sample marked. Barrow Crude Oil. On Behalf Of. Chevron Australia Pty Ltd. Laboratory Supervisor. Crude Assay Chemist
Crude Assay Report on Crude Oil sample marked Barrow Crude Oil On Behalf Of Chevron Australia Pty Ltd. Reported by: Approved by: Michelle Fernandez Laboratory Supervisor Jhonas Fernandez Crude Assay Chemist
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
Softening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer
Softening point by Ring & Ball Density and relative density of liquids by Hubbart pycnometer Distillation of petroleum Melting point of petroleum wax Precipitation number of lubricating oils Saponification
Middle East CAPABILITY MANUAL
Middle East CAPABILITY MANUAL Management Office & Dubai Laboratory : P.O Box.5778, TP/010305, Techno Park, Dubai, U.A.E., Tel. +971-4-8867400, Fax. +971-4-8867401/8867402 Email : sales@geochem.ae; laboratory@geochem.ae;
Eraring Power Station - EPA Licence Coal Unloader - EPA Licence Environmental Monitoring Data July 2016
Eraring Power Station - EPA Licence 1429 Rocky Point Rd, Morriset NSW 2264 Coal Unloader - EPA Licence 4297 Eraring Coal Delivery Facility, Construction Rd, Dora Creek NSW 2264 Environmental Monitoring
ANNEX 2, REFERENCE FUELS
ANNEX 2, REFERENCE FUELS A.2.1. A.2.1.1. EUROPE, INDIA, SOUTH AFRICA Petrol (E5) Parameter Unit Limits (1) Test method Research octane number, RON 95.0 EN 25164 pren ISO 5164 Motor octane number, MON 85.0
FREQUENTLY ASKED QUESTIONS (FAQs)
FREQUENTLY ASKED QUESTIONS (FAQs) What are the Petrochemicals? Any chemical derived from crude oil,crude products or natural gas. Where the petrochemicals are used? In the manufacture of Synthetic rubber,
OIL PT. Scheme Description. Oils and Fuels Analysis Proficiency Testing Scheme
OIL PT Oils and Fuels Analysis Proficiency Testing Scheme Scheme Description LGC Standards Proficiency Testing 1 Chamberhall Business Park Chamberhall Green Bury, BL9 0AP UK. Telephone: +44 (0) 161 762
Regional Laboratory, Indian Oil Corporation Limited, Korukkupet Terminal, Kathivakkam High Road, Chennai, Tamil Nadu
Regional, Indian Oil Corporation Limited, Korukkupet Last Amended on 07.01.2014 Page 1 of 5 Specific Method Specification against Range of ing / I. PETROLEUM PRODUCTS 1. JetA1, JP5 Acidity, Total P-113
ITS Caleb Brett India:
ITS Caleb Brett India: World-Class Inspection & Quality Control Testing. Serving India, the region and the world. See Our Services Pages 2-17. ITS Caleb Brett India has six analytical testing laboratories
ANNEX 3 REFERENCE FUELS. Parameter Unit Limits (1) Test method Minimum Maximum Research octane number, RON
WLTP-2012-018 Annex 3 Draft Reference fuels 03.06.2012 ANNEX 3 REFERENCE FUELS The reference fuel specifications listed in this annex are those that are to be used for the WLTP Validation 2 exercise and
PRODUCT CONFORMITY & REGULATORY REQUIREMENTS FOR AUTOMOTIVE PARTS FOR THE REGION-TYRES & BATTERIES
PRODUCT CONFORMITY & REGULATORY REQUIREMENTS FOR AUTOMOTIVE PARTS FOR THE REGION-TYRES & BATTERIES AT A GLANCE Nº1 90,000 2,000 WORLD LEADER EMPLOYEES OFFICES AND LABORATORIES 12 GLOBAL SERVICE LOCAL EXPERTISE
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
NeuGen. sustainable. environmentally. dielectric fluid. IMCD Australia Limited. Level 1 / 372 Wellington Road Mulgrave VIC 3170
environmentally sustainable dielectric fluid www.biolectric.com.au IMCD Australia Limited Level 1 / 372 Wellington Road Mulgrave VIC 3170 environmentally sustainable dielectric fluid An essential component
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that has been assessed by ANAB and meets the requirements
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
WHITE OILS MAX 160 MIN. liquid cst
WHITE OIL 8 0.812 0.845 0.810 0.842 0.819 0.816 7 10 cst 5 cst 476 6 MAX 39 150 MIN 154 WHITE OIL 12 0.818 0.858 0.815 0.855 0.824 0.821 10 14 cst 19 cst 6 MAX 24 160 MIN 166 476 The above data is indicated
Variation Notice with introductory note
Variation Notice with introductory note Pollution Prevention and Control Regulations 2000 Dudley Energy from Waste Facility MES Environmental Ltd Lister Road Dudley West Midlands DY2 8JT. Variation Notice
APPENDIX D WATER QUALITY DATA
APPENDIX D WATER QUALITY DATA Mr. John Keating August 9, 2002 Page 2/8 SW-4 and at the settling pond near the bulk extraction area. In addition, total and faecal coliform bacteria samples are collected
MONITORING SOLUTION FOR MARINE MAIN ENGINE CYLINDERS PROTECTION
COLD CORROSION MONITORING SOLUTION FOR MARINE MAIN ENGINE CYLINDERS PROTECTION UNIMARINE MARINE ENGINES CYLINDERS SCRAPE-DOWN OIL ANALYSIS (CSDOA) FOCUS ON PREVENTIVE MAINTENANCE UniMarine provides high
Tests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL. SINCE 1985 Quality Controlled Through Analysis
Tests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL SINCE 1985 Client: Powertron LLC Requested By: Mr. Tony Sgarbi Sample: 10% PermaFrost + 90% Report
MiniLab EL Series for High Performance Engine Development and Maintenance
MiniLab EL Series for High Performance Engine Development and Maintenance Optimize performance output Detect problems early Ensure safety in operation Engine Oil Analysis: A Reliable Technique for Engine
ASTM D Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels
ASTM D 6751 02 Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels Summary This module describes the key elements in ASTM Specifications and Standard Test Methods ASTM Specification
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK retby usiness Park Ashby Road Stanhope urton upon Trent Staffordshire DE15 0YZ Contact: Mr R M Allen Tel: +44 (0)1283 216334 Fax: +44 (0)1283
GLYCERIN PACKAGE 100mL $ Glycerin, Ibs/gallon, MONG Material Organic, Non-Glycerin, Ash, Specific Gravity, Moisture by Karl Fisher, Methanol
FUEL BIODIESEL SUGGESTED SAMPLE SIZE (MINIMUM) FEE GLYCERIN PACKAGE 100mL $350.00 Glycerin, Ibs/gallon, MONG Material Organic, Non-Glycerin, Ash, Specific Gravity, Moisture by Karl Fisher, Methanol ETHANOL
ISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements
INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de
Our reputation is the wheel of our success.
1 2 3 Our reputation is the wheel of our success www.ftmaritime.com FT Maritime Services Ltd. 4 5 Our company During the team s past experience in the marine industry as cargo brokers, the need to offer
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
Tintometer -Group. Comparator Highlights. The system for colorimetric water analysis
Tintometer -Group Highlights More than 400 different test discs are available Compensation for coloured and turbid samples Guaranteed constancy of the coloured glass standards Integrated prism The system
Jet fuel control: Specification test methodology
Jet fuel control: Specification test methodology 2 Contents appreciation of test methodology Recap specification requirements Key attributes of test methods Overview of test types Precision, accuracy,
CRUDE OIL SPECIFICATIONS
CRUDE OIL SPECIFICATIONS CRUDE OIL TYPE Results RUSSIAN EXPORT BLEND CRUDE OIL (REBCO) Specifications Corresponding to GOST TU 39-1623-93: Density API at 30 degrees C 0,870 API Gravity 32.00 Viscosity
1. Introduction: 2. Vehicle categories. Gross Vehicle Weight (kg) Curb Weight (kg) Motorcycles - - Passenger Cars and Variations
1. Introduction: Brazilian emissions regulation for light vehicles is based on American limits and procedures while for heavy duty vehicles and motorcycles it is based on European limits and procedures.
Comparator The system for colorimetric water analysis. Applications. Water Treatment (e.g. Drinking Water) Pool-Water.
Comparator 2000+ The system for colorimetric water analysis Applications Water Treatment (e.g. Drinking Water) Pool-Water Research Centres Universities Special Applications Laboratory and Field Testing
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33225-9 SOUTH AFRICAN NATIONAL STANDARD Automotive fuels Requirements and test methods for diesel WARNING This document references other documents normatively. Published by SABS Standards
Complete Laboratory Solutions
Ros Muc, Connemara, Co.Galway Testing Laboratory Registration number: 108T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule bearing the Registration Number
GUIDELINES FOR USE OF LOW SULPHUR FUEL OILS IN SHIPS
GUIDANCE NOTES GD 12-2013 CHINA CLASSIFICATION SOCIETY GUIDELINES FOR USE OF LOW SULPHUR FUEL OILS IN SHIPS 2013 Beijing CONTENTS 0 Foreword...1 Chapter 1 General...3 1.1 Application...3 1.2 Definitions
Crude & Petroleum Products Specification & Analysis
Training Title Crude & Petroleum Products Specification & Analysis Training Duration 5 days Training Venue and Dates Crude & Petroleum Products Specification & Analysis 5 04-08 November $3,750 Abu Dhabi
SAN ANTONIO WATER SYSTEM
Detection Limit Concentration Range CONSTITUENTS for Reporting Found MCL Hardness as CaCO3 (mg/l) 1.50 338 to 348 Total dissolved solids (mg/l) 5.00 392 to 448 500 ** Specific Conductance (umhos/cm) 639
Tung Xiao Dan Assistant Chemist Mark Tan Section Head Feedstock Evaluation Department
Sample ID : Lab ID : Date : Client : Chim Sao Crude 2014-FED-051699 01 October 2014 Premier Oil Sample Number : Sample Date : Sample Time : Location : 4/4 10/9/2014 1500hrs Run Down Reported by : Approved
Spring 2015 Summary Report Residential Drinking Water Well Sampling LRI Landfill
Spring 2015 Summary Report Residential Drinking Water Well Sampling LRI Landfill Contents 1. Summary 2. Table 1 Spring 2015 Water Quality Results 3. Table 2 Spring 2015 Water Quality VOC Results 4. Table
Anglomoil Hydraulic BIO-FR was designed to replace anti-wear, mineral oil based hydraulic fluids used in applications where fire hazards exist.
Product Description Anglomoil Hydraulic BIO-FR was designed to replace anti-wear, mineral oil based hydraulic fluids used in applications where fire hazards exist. Product Features & Benefits PRODUCT DATA
Quantitative Analysis of Chemical Compositions from Various Sources of Crude Glycerine
CMU.J.Nat.Sci.Special Issue on Agricultural & Natural Resources (2012) Vol.11 (1) 157 Quantitative Analysis of Chemical Compositions from Various Sources of Crude Glycerine Adisorn Settapong * and Chaiyawan
Formulated for better protection, longer oil life and better system efficiency. Extra protection Industrial applications
SHELL TELLUS INDUSTRIAL HYDRAULIC FLUIDS The Shell Tellus range of hydraulic fluids is designed to help make it easy for equipment operators to select the Shell lubricant that will best deliver value to
ULSFO (0.10) and RM (VLSFO) Category Potential future trends
ULSFO (0.10) and RM (VLSFO) Category Potential future trends Douglas Raitt Regional Marine Consultancy Manager Working together for a safer world Revised MARPOL Annex VI - Methods for compliance SOx NOx
Significance of Each Test. 1. Color (Visual)
Significance of Each Test 1. Color (Visual) Determine the color of lubricant product by assessing the appearance of transmitted light appearance and intensity, as compare with a standard. Color alone is
Fuel Related Definitions
Fuel Related Definitions ASH The solid residue left when combustible material is thoroughly burned or is oxidized by chemical means. The ash content of a fuel is the non combustible residue found in the
Alberta Innovates - Technology Futures ~ Fuels & Lubricants
Report To: 5 Kings College Road Toronto, Ontario, M5S 3G8 Attention: Curtis Wan E-mail: curtis.wan@utoronto.ca Fax: Alberta Innovates - Technology Futures ~ Fuels & Lubricants 250 Karl Clark Road, Edmonton,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 611 Dream Valley Road Rogers, AR 72756 Chessie Koko Phone: 479-636-8782 CHEMICAL Valid To: May 31, 2018 Certificate Number:
ION EXCHANGE (I) LTD INDUSTRIAL CHEMICAL DIVISION
ION EXCHANGE (I) LTD INDUSTRIAL CHEMICAL DIVISION WATER QUALITY PRODUCTS You can t manage what you can t measure. The importance of measurement is very well recognized by the industry. However, lack of
VHG Labs, Inc. Standards and Supplies for Spectrochemical Oil Analysis
VHG Labs, Inc. Standards and Supplies for Spectrochemical Oil Analysis Metallo-Organic Standards from VHG Labs VHG Labs has been a provider of quality analytical products and services for over 25 years.
SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009
SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009 DCG PARTNERSHIP 1, LTD. 4170 A South Main Pearland, TX 77581 Louis D Agostaro Phone: 281-648-1894 Ext. 201 REFERENCE MATERIAL PRODUCER Valid To: November 30,
ATTENTION: DIESEL FUEL USERS
P a g e 2 ATTENTION: DIESEL FUEL USERS Have you noticed Smelly fuel? Water in your fuel? Diesel bug? Algae/bacteria? Slime in fuel tanks? Excessive black smoke? Nature itself adds to the problems of the
National Oil Corporation Libyan Petroleum Institute. Crude oil assay Sarir crude oil
National Oil Corporation Libyan Petroleum Institute Crude oil assay Sarir crude oil Work Order No. LPI- 00344/10/IL02/2008 Client: National Oil Corporation Date of Issue: Dec., 2008 Prepared by: Industrial
Fuel oils Specification
TANZANIA STANDARD CDC15 (4029)P3 (Rev. of TZS 673:2014) Fuel oils Specification 0 Foreword This Tanzania Standard was prepared under the direction of Petroleum and Petroleum Products Technical committee,
National Oil Corporation Libyan Petroleum Institute. Crude Oil Assay Messla Crude Oil
National Oil Corporation Libyan Petroleum Institute Crude Oil Assay Messla Crude Oil Work Order No. LPI- 00344/08/IL02/2008 Client: National Oil Corporation Date of Issue: Nov., 2008 Prepared by: Industrial
Louis Dreyfus Claypool Holdings, LLC. Biodiesel Production Plant Claypool, Indiana
Louis Dreyfus Claypool Holdings, LLC Biodiesel Production Plant Claypool, Indiana Soybeans 163,000 Bu. = 48 Railcars = 172 Trucks Electricity 156,695 Kwh Natural Gas 3,049 Dth Claypool Inputs/Outputs Per
ASTM Methods that are feasible with Metrohm instruments
ASTM Methods that are feasible with Metrohm instruments Automotive ASTM D5827-09 Standard test method for analysis of engine coolant for chloride and other anions by ion Biofuels a) Biodiesel ASTM D664-09
Plate Heat Exchangers
Plate Heat Exchangers General Plate heat exchangers are used wherever thermal energy (heat) has to be transferred from one fl uid to another. The advantage is that they can maintain the fl uid temperature
Metallic Systems TYPE SPTC
CONDUIT 27/01/2009 Technical Data Sheet Page No. 1 Applications Hospitals External Safety Critical Area Fittings IP54 SPB Fittings type A & B Characteristics Very High UV Resistance High Flexibility Medium
Sample Containers, Preservation Techniques, and Holding Times For Aqueous Matrices
Babcock Laboratories, Inc. Quality Manual Page App K-1 of App K-5 Sample Containers, Preservation Techniques, and Holding Times For Aqueous Matrices Bacteriological Analyses Coliform, Total SM9221B,SM9223
Backup Power. Renewable Resources. Fleet Fueling. Industrial Applications Community Fueling. Personal Energy Station
Backup Power Renewable Resources Fleet Fueling Industrial Applications Community Fueling Personal Energy Station Stuart Energy, 2002 1 H2 Integration into Retail Stations Works! FCEV safety is affected
ENGINEERED LUBRICANTS CO.
ENGINEERED LUBRICANTS CO. LABORATORY FEE SCHEDULE Effective August 1, 2017 Page 1 of 5 Please send in SDS with samples. If you do not have an SDS please give a generic make-up of the product. (If we do
D ISB Lubricant Performance Test. Report Packet Version No. Method. Conducted For:
D 7484 - ISB Lubricant Performance Test Report Packet Version No. Method Conducted For: V = I = N = Valid; The reference oil / non-reference oil was evaluated in accordance with the test procedure. Invalid;
MiniLab EL Series for High Performance Engine Development and Maintenance
MiniLab EL Series for High Performance Engine Development and Maintenance Optimize performance output Detect problems early Ensure safety in operation Engine Oil Analysis: A Reliable Technique for Engine
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Prenton Way Contact: Dr J Roberts North Cheshire Trading Estate Tel: +44 (0)151 649 9955 Prenton Fax: +44 (0)151 649 9977 Wirral E-Mail: