The Significance of Tests. Petroleum Products. A Report Prepared by A.S.T.M. COMMITTEE D-2. On Petroleum Products and Lubricants PUBLISHED BY

Size: px
Start display at page:

Download "The Significance of Tests. Petroleum Products. A Report Prepared by A.S.T.M. COMMITTEE D-2. On Petroleum Products and Lubricants PUBLISHED BY"

Transcription

1

2 The Significance of Tests of Petroleum Products A Report Prepared by A.S.T.M. COMMITTEE D-2 On Petroleum Products and Lubricants ASIZs PUBLISHED BY AMERICAN SOCIETY FOR TESTING MATERIALS 260 S. Broad St. Philadelphia, Pa,

3 HpHE American Society for Testing Materials is a national tech- *- nical society of professional engineers, designers, testing experts, chemists, manufacturers, users and others interested in the properties of materials, organized for the purpose of "the promotion of knowledge of the materials of engineering, and the standardisation of specifications and the methods of testing" The work is done in two ways: first, through the presentation of scientific and technical data to the Society and its committees in the form of papers and discussions that are published in Proceedings; and, second, through the activities of its sixty standing and research committees appointed to study the properties of various materials of engineering. The committees are responsible for the development of standard specifications, methods of testing, and definitions of terms. In the development of these standards the committees function under definite regulations, governing their organization and procedure to insure adequate representation of producers, consumers and general interests, with the provision that producers may not predominate. THe regulations further provide for the procedure for acceptance and formal adoption of the standards by the Society. The several classes of Society membership are: Honorary, Sustaining, Company and Individual, Junior, and Student. Membership may be held by persons, corporations, firms, technical or scientific societies, teaching faculties, libraries, etc. All members, with the exception of student members, receive the regular publications of the Society which include: Proceedings, containing committee reports, new tentative standards and technical papers; Book of A.S.T.M. Standards, Part I on Metals or Part II on Non-Metallic Materials; Year Book; and A.S.T.M. Bulletin. The Society encourages, in every way possible, research that will contribute toward the general knowledge of materials, and carries on considerable research in the metals and non-metals fields through the activities of its sixty standing and research committees, which have a total membership of about The Society has also joined with other national bodies in a number of cooperative movements. Information regarding the activities of the American Society for Testing Materials may be obtained by addressing the Society at the Headquarters, 260 S. Broad St., Philadelphia, Pa.

4 The Significance of Tests of Petroleum Products A Report Prepared by A.S.T.M. COMMITTEE D-2 On Petroleum Products and Lubricants Second Printing, October, 1937 Price: One dollar COPYRIGHT, 1934, BY THE AMERICAN SOCIETY FOR TESTING MATERIALS 260 S. Broad St. Philadelphia, Pa.

5 FOREWORD c OMMITTEE D-2 on Petroleum Products and Lubricants has undertaken in this report to meet the growing demand on the part of the general public for information regarding the significance of the tests used in evaluating petroleum products. The first edition of this pamphlet was largely the work of Subcommittee XXVII on Application of Tests, a subcommittee composed of the chairmen of all other D-2 subcommittees and appointed specifically for this work. This revision was made by a special subcommittee with the cooperation of the chairmen of other subcommittees and of Committee D-4 on Road and Paving Materials under whose jurisdiction certain of the tests were developed. The character of the membership of Committee D-2 ensures that all points of view on tests for petroleum products are given proper consideration. < In common with other standing committees of the American Society for Testing Materials, the members are classified into "Consumers," "Producers" and "General Interests," depending upon whether they represent the buyer of oil, the seller, or the man interested in petroleum testing who does not belong to the preceding classes. The rules of the Society provide that the number of "Consumers" and "General Interests" combined may not be less than the number of "Producers" on the committee. The volume references for standards and tentative standards throughout this report are to the permanent publications of the Society. All of the standards and tentative standards referred to, however, appear in the special reprint pamphlet comprising the current Report of Committee D-2 on Petroleum Products and Lubricants and all of the A.S.T.M. Methods of Test and Specifications Relating to Petroleum Products, 2 which pamphlet may be more readily accessible than the permanent publications and thus serve as a means of ready reference to the methods. September, T. A. BOYD, Chairman, Committee D-2. 1 In this second printing of the 1934 edition, the references to the Standard and Tentative Methods of Test have been brought up to date and a portion of the Section on Viscosity (pages 44 to 46) has been rewritten because of developments in this field. Also a few errors have been corrected. ED. 2 The volume of "A.S.T.M. Standards on Petroleum Products and Lubricants" is issued annually in a special reprint pamphlet. ED.

6 CONTENTS Acidity (in Gasoline) Ash Autogenous Ignition Temperature Bituminous Materials, Tests fo Burning Quality (Illuminating Oils) Carbon Residue Cloud and Pour Points Coefficient of Friction. Color Consistency Corrosion Tests. Dielectric Strength Dilution of Crankcase Oils Distillation Tests Doctor Test. Ductility (Bituminous Materials) Emulsification. Emulsified Asphalts. Evaporation Tes Extreme-Pressure Lubricants. Flash and Fire Tests Float Test (Bituminous Materials) Flock Test Friction, Coemcient 01. Gravity Grease Analysis Gum (in Gasoline) Knock Characteristics (of Motor Fuels) Loss on Heating (Bituminous Materials) Melting Point Neutralization Number Oil and Moisture (in Paraffin Waxes). Oxidation at High Temperatures Penetration Test Pour Point Test Precipitation Tests Protection Tes Residue of Specified Penetration (Bituminous Materials) Saponification Number Sediment and Wate Softening Point (Bituminous Materials) Solubility Tests (Bituminous Materials) Specific Gravity PAGE , , 7, 54, , , i , , , 71, , 74.23,71, 74

7 CONTENTS Spot Test Sulfur Thermal Value Vapor Pressure Viscosity Volatility: Flash and Fire Tests Distillation Tests Vapor-Pressure and Evaporation Tests. Water and Sediment Wick-Feed Test PAGE 62 5, 7, , 7, 44, , 73,

8

#281A SYNTHETIC PLUS HEAT TRANSFER OIL

#281A SYNTHETIC PLUS HEAT TRANSFER OIL #281A SYNTHETIC PLUS HEAT TRANSFER OIL Synthetic Plus Heat Transfer Oil is a non-corrosive, non-fouling, para-synthetic heat transfer fluid that is formulated to provide fast and efficient heat transfer

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock

SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate

More information

SYMPOSIUMS ON RAILROAD MATERIALS LUBRICATING OILS

SYMPOSIUMS ON RAILROAD MATERIALS LUBRICATING OILS SYMPOSIUMS ON RAILROAD MATERIALS LUBRICATING OILS Presented at the SECOND PACIFIC AREA NATIONAL MEETING Los Angeles, Calif., September 18-19, 1956 AMERICAN SOCIETY FOR TESTING MATERIALS Reg. U.S.Pat. Off.

More information

Fuel Related Definitions

Fuel Related Definitions Fuel Related Definitions ASH The solid residue left when combustible material is thoroughly burned or is oxidized by chemical means. The ash content of a fuel is the non combustible residue found in the

More information

BITUMINOUS PAVING MATERIALS

BITUMINOUS PAVING MATERIALS BITUMINOUS PAVING MATERIALS Symposium on Methods of Test for Design of Bituminous Paving Mixtures Symposium on Practical and Statistical Significance of Tests and Properties of Bituminous Binders Session

More information

Softening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer

Softening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer Softening point by Ring & Ball Density and relative density of liquids by Hubbart pycnometer Distillation of petroleum Melting point of petroleum wax Precipitation number of lubricating oils Saponification

More information

SYMPOSIUM ON LUBRICANTS FOR AUTOMOTIVE EQUIPMENT

SYMPOSIUM ON LUBRICANTS FOR AUTOMOTIVE EQUIPMENT SYMPOSIUM ON LUBRICANTS FOR AUTOMOTIVE EQUIPMENT Presented at the FOURTH PACIFIC AREA NATIONAL MEETING AMERICAN SOCIETY FOR TESTING AND MATERIALS Los Angeles, Calif., Oct. 1-3, 1962 Reg. U. S. Pat. Oft.

More information

Special Provision No. 111S12 July 2017

Special Provision No. 111S12 July 2017 AMENDMENT TO OPSS 1103, NOVEMBER 16 Special Provision No. 111S12 July 17 OPSS 1103, November 16, Material Specification for Emulsified Asphalt, is deleted in its entirety and replaced with the following:

More information

DRAFT Jamaican Standard Specification for Bituminous materials

DRAFT Jamaican Standard Specification for Bituminous materials DRAFT Jamaican Standard Specification for Bituminous materials BUREAU OF STANDARDS Notice This is a draft standard and shall be used or referred to as a Jamaican Standard. It is subject to change without

More information

Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method) 1

Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method) 1 Designation: D 6749 02 An American National Standard Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method) 1 This standard is issued under the fixed designation D 6749;

More information

DEPARTMENT OF CHEMICAL ENGINEERING University of Engineering & Technology, Lahore. Energy Engineering Lab

DEPARTMENT OF CHEMICAL ENGINEERING University of Engineering & Technology, Lahore. Energy Engineering Lab DEPARTMENT OF CHEMICAL ENGINEERING University of Engineering & Technology, Lahore Energy Engineering Lab Introduction Energy is often defined as the capacity to do work. Several different forms of energy,

More information

Focus on Training Section: Unit 3

Focus on Training Section: Unit 3 All Pump Types Page 1 1. Title Page Unit learning objectives Understand the properties of common types of fuels Understand the principals of filtration Be able to make recommendations regarding fuel storage

More information

International Quality Assurance Exchange Program Schedule. Fuel Month Number Type Dispatch Date Closing Date

International Quality Assurance Exchange Program Schedule. Fuel Month Number Type Dispatch Date Closing Date Fuel 2018 Month Number Type Dispatch Date Closing Date January February March April May June July August September October November December M902 Motor Gasoline, Premium A372 Aviation Gasoline, 100LL D295

More information

Exceeding Expectations

Exceeding Expectations Technical Notes # 028 Linear vs. Non-Linear that is the question Exceeding Expectations When blending, it is important to understand whether the specification you are blending for is linear or non-linear

More information

Unit D: Agricultural Equipment Systems. Lesson 1: Understanding Applications of Fluids and Lubricants in Agricultural Equipment

Unit D: Agricultural Equipment Systems. Lesson 1: Understanding Applications of Fluids and Lubricants in Agricultural Equipment Unit D: Agricultural Equipment Systems Lesson 1: Understanding Applications of Fluids and Lubricants in Agricultural Equipment 1 Terms Ash content bottom dead center cloud point compression ratio coolant

More information

Standard Test Method for Dropping Point of Lubricating Grease 1

Standard Test Method for Dropping Point of Lubricating Grease 1 Designation: D 566 02 An American National Standard British Standard 2877 Designation: 132/96 Standard Test Method for Dropping Point of Lubricating Grease 1 This standard is issued under the fixed designation

More information

Louis Dreyfus Claypool Holdings, LLC. Biodiesel Production Plant Claypool, Indiana

Louis Dreyfus Claypool Holdings, LLC. Biodiesel Production Plant Claypool, Indiana Louis Dreyfus Claypool Holdings, LLC Biodiesel Production Plant Claypool, Indiana Soybeans 163,000 Bu. = 48 Railcars = 172 Trucks Electricity 156,695 Kwh Natural Gas 3,049 Dth Claypool Inputs/Outputs Per

More information

Standard Classification System for Carbon Blacks Used in Rubber Products 1

Standard Classification System for Carbon Blacks Used in Rubber Products 1 Designation: D 1765 04 Standard Classification System for Carbon Blacks Used in Rubber Products 1 This standard is issued under the fixed designation D 1765; the number immediately following the designation

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY & ON-STREAM ANALYSER DIVISION, SAUDI ARAMCO TOTAL REFINING AND PETROCHEMICAL COMPANY LAB & OSA Division Saudi Aramco Total Refining and Petrochemical

More information

MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT

MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 1103 NOVEMBER 16 MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT TABLE OF CONTENTS 1103.01 SCOPE 1103.02 REFERENCES 1103.03 DEFINITIONS 1103.04

More information

ASTM D Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels

ASTM D Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels ASTM D 6751 02 Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels Summary This module describes the key elements in ASTM Specifications and Standard Test Methods ASTM Specification

More information

GB Translated English of Chinese Standard: GB NATIONAL STANDARD

GB Translated English of Chinese Standard: GB NATIONAL STANDARD Translated English of Chinese Standard: GB17930-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2016 Replacing

More information

SINGLE CYLINDER ENGINE TESTS FOR EVALUATING THE PERFORMANCE OF CRANKCASE LUBRICANTS

SINGLE CYLINDER ENGINE TESTS FOR EVALUATING THE PERFORMANCE OF CRANKCASE LUBRICANTS SINGLE CYLINDER ENGINE TESTS FOR EVALUATING THE PERFORMANCE OF CRANKCASE LUBRICANTS Part I: Caterpillar IG2 Test Method Not an ASTM Standard Sponsored by Technical Division B on Automotive Lubricants of

More information

Table of Contents. Copyright and Trademarks 5. Copyright 5 Revision 5 Disclaimer of Liability 5 Copy and Use Restrictions 5.

Table of Contents. Copyright and Trademarks 5. Copyright 5 Revision 5 Disclaimer of Liability 5 Copy and Use Restrictions 5. Table of Contents Copyright and Trademarks 5 Copyright 5 Revision 5 Disclaimer of Liability 5 Copy and Use Restrictions 5 Introduction 6 Blending Quality Models Equations 7 Overview 7 Common Terms 7 Density

More information

ISBN SANS 342:2006 Edition 4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan roa

ISBN SANS 342:2006 Edition 4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan roa ISBN 0-626-18752-4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344

More information

FREQUENTLY ASKED QUESTIONS (FAQs)

FREQUENTLY ASKED QUESTIONS (FAQs) FREQUENTLY ASKED QUESTIONS (FAQs) What are the Petrochemicals? Any chemical derived from crude oil,crude products or natural gas. Where the petrochemicals are used? In the manufacture of Synthetic rubber,

More information

Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion

Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32948-8 SOUTH AFRICAN NATIONAL STANDARD Petroleum jelly (petrolatum) WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road

More information

Draft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION

Draft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard Doc:PCD 3(2537)C September 2012 SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Not to be reproduced without the permission

More information

Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method) 1

Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method) 1 This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because it may not be technically

More information

DMS-9203, Asphaltic Concrete Patching Material (Containerized)

DMS-9203, Asphaltic Concrete Patching Material (Containerized) Overview Effective Date: July 1999 July 2004 This specification shall govern for containerized asphaltic concrete mixture intended primarily for cool to cold, wet weather repair of small pavement areas.

More information

PETROLEUM LABORATORY TESTING AND OPERATIONS

PETROLEUM LABORATORY TESTING AND OPERATIONS * FM 10-67-2 Field Manual No. 10-67-2 HEADQUARTERS DEPARTMENT OF THE ARMY Washington, DC, 2 April 1997 PETROLEUM LABORATORY TESTING AND OPERATIONS Table of Contents Page PREFACE CHAPTER 1 I CHAPTER 2 I

More information

Regional Laboratory, Indian Oil Corporation Limited, Korukkupet Terminal, Kathivakkam High Road, Chennai, Tamil Nadu

Regional Laboratory, Indian Oil Corporation Limited, Korukkupet Terminal, Kathivakkam High Road, Chennai, Tamil Nadu Regional, Indian Oil Corporation Limited, Korukkupet Last Amended on 07.01.2014 Page 1 of 5 Specific Method Specification against Range of ing / I. PETROLEUM PRODUCTS 1. JetA1, JP5 Acidity, Total P-113

More information

Annex no. 1 of Accreditation Certificate no. LI 333 from

Annex no. 1 of Accreditation Certificate no. LI 333 from Valid from 04.02.2008 to 04.02.2012 Oil Products Laboratory DJ No. 226, Nvodari, Constana county belonging to SC ROMPETROL QUALITY CONTROL SRL 1 2 3 4 Physical tests 1. Determination of the density with

More information

Phillips Texas Pipeline Company, LTD. Amarillo-Lubbock Pipeline (SAAL) Product Specifications

Phillips Texas Pipeline Company, LTD. Amarillo-Lubbock Pipeline (SAAL) Product Specifications Current Publication Date: 5/12/2016 Previous Publication Date: Revision Notes: First Revision Published 5/12/2016 Product Index Product Name Gasoline, Subgrade, 82.4 octane (86.3 after 10% ETOH addition)

More information

Standard Specification for ASTM Hydrometers 1

Standard Specification for ASTM Hydrometers 1 Designation: E 100 03 Standard Specification for ASTM s 1 This standard is issued under the fixed designation E 100; the number immediately following the designation indicates the year of original adoption

More information

FUELS. Product Specifications

FUELS. Product Specifications FUELS Product Specifications This Lesson Is Designed: To provide you with an understanding of specifications and terms used in the marketing of fuels. To show you how to use the information contained in

More information

Section 4 DMS-9203, Asphaltic Concrete Patching Material (Containerized)

Section 4 DMS-9203, Asphaltic Concrete Patching Material (Containerized) Section 4 DMS-9203, Asphaltic Concrete Patching Overview Effective Date: August 2004 - December 2005. This Specification governs for rapid curing containerized asphaltic concrete mixture intended primarily

More information

PRICE LIST 2017/2018

PRICE LIST 2017/2018 PRECISION PETROLEUM LABS, INC. 5915 STAR LANE HOUSTON, TX 77057 PRICE LIST 2017/2018 PH: 713-680-9425 Fax: 713-680-9564* WEBSITE: PRECISIONLABS.ORG FUEL TESTING Acidity as Acetic Acid D-1613 $65.00 Alcohol

More information

Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints 1

Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints 1 Designation: A 865 97 AMERICAN SOCIETY FOR TESTING AND MATERIALS 00 Barr Harbor Dr., est Conshohocken, PA 9428 Reprinted from the Annual Book of ASTM Standards. Copyright ASTM Standard Specification for

More information

MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT

MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1103 FEBRUARY 1996 MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT 1103.01 SCOPE 1103.02 REFERENCES 1103.03 Not Used 1103.04 Not Used 1103.05 MATERIALS

More information

Specifications Of Straight Run Naphtha for Exportation

Specifications Of Straight Run Naphtha for Exportation Specifications Of Straight Run Naphtha for Exportation ASTM Specific Gravity @ 60/60 F 1298 160 0.690-0.730 Colour VISUAL Colourless R.V.P @ 100 F kg/cm2 max 323 69 0.07 Sulphur, Total %mass max 1266 107

More information

COMMERCIAL ITEM DESCRIPTION DRY CLEANING AND DEGREASING SOLVENT, PD680

COMMERCIAL ITEM DESCRIPTION DRY CLEANING AND DEGREASING SOLVENT, PD680 NOT MEASUREMENT SENSITIVE 27 September 00 COMMERCIAL ITEM DESCRIPTION DRY CLEANING AND DEGREASING SOLVENT, PD680 The General Services Administration has authorized the use of this commercial item description

More information

COLOMBIA. 2. Vehicle categories: 2.1. Categories for application with European limits. M = Passenger vehicle N = Commercial vehicle

COLOMBIA. 2. Vehicle categories: 2.1. Categories for application with European limits. M = Passenger vehicle N = Commercial vehicle COLOMBIA COLOMBIA 1. Introduction: American and European emissions limits, with respective test cycles, are applied. There are no emissions laboratories in, because of this test reports carried out by

More information

Supply of Services for Detailed OEB Crude Assay Analysis

Supply of Services for Detailed OEB Crude Assay Analysis Tender Number [9900009229] Supply of Services for Detailed OEB Crude Assay Analysis SCOPE OF WORK SCOPE OF WORK 1. Introduction Orpic is the brand name for Oman Oil Refineries and Petroleum Industries

More information

Corrections - STP 512A. Third paragraph - Change MIL-L-2105C to MIL-L-2105D. Table 3- Title change MIL-L-2105C to MIL-L-2105D

Corrections - STP 512A. Third paragraph - Change MIL-L-2105C to MIL-L-2105D. Table 3- Title change MIL-L-2105C to MIL-L-2105D @ INTERNATIONAL Standards Worldwtde Address 100 Ba~ Harbor Dnve PO Box C700 W Conshohocken. PA 79~28-2959' USA Phone 610832.9500 Fax 670.832.9555 e-mah serwce,~astm.org Web ww~astm.org Corrections - STP

More information

Crude & Petroleum Products Specification & Analysis

Crude & Petroleum Products Specification & Analysis Training Title Crude & Petroleum Products Specification & Analysis Training Duration 5 days Training Venue and Dates Crude & Petroleum Products Specification & Analysis 5 04-08 November $3,750 Abu Dhabi

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SGS West Thurrock Laboratory Contact: David Mercer (Laboratory Manager) 859 London Road Tel: +44 (0)1708 681943 West Thurrock Fax: +44 (0)1708

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 0-626-18752-4 SANS 342:2006 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911

More information

Neutral Oils : 60R, 110RVL, 100R, 150R, 220R, 600R

Neutral Oils : 60R, 110RVL, 100R, 150R, 220R, 600R Neutral Oils : 60R, 1RVL, 0R, 150R, 220R, 600R (80) Neutral Oils are all-hydroprocessed, / II+ paraffinic base oils that can be used in blending in a variety of lubricant and process oils. Application

More information

By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document

By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document By the Authority Vested By Part 5 of the United States Code 552(a) and Part 1 of the Code of Regulations 51 the attached document has

More information

Heartland Pipeline. Heartland Pipeline Company Product Specifications. Effective Date: 10/1/2015

Heartland Pipeline. Heartland Pipeline Company Product Specifications. Effective Date: 10/1/2015 Company Product Name Gasoline, Subgrade, 83 octane (87 after 0% ETOH addition) Destination(s) V Grade Gasoline, Conventional, 9 octane (no ethanol) A Grade Distillate, #2 Diesel Fuel / Fuel Oil, Ultra-Low

More information

Smoke Point Significance and Use

Smoke Point Significance and Use Smoke Point The maximum height, in millimetres, of a smokeless flame of fuel burned in a wick-fed lamp of specified design. The sample is burned in an enclosed wick-fed lamp that is calibrated against

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,

More information

Fuel oils Specification

Fuel oils Specification TANZANIA STANDARD CDC15 (4029)P3 (Rev. of TZS 673:2014) Fuel oils Specification 0 Foreword This Tanzania Standard was prepared under the direction of Petroleum and Petroleum Products Technical committee,

More information

MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT

MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1103 NOVEMBER 07 MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT TABLE OF CONTENTS 1103.01 SCOPE 1103.02 REFERENCES 1103.03 DEFINITIONS 1103.04 DESIGN

More information

Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan.

Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan. Issue : 10/08/15 Accreditation No: Awarded to Attock Refinery Limited, Rawalpindi, Pakistan. The scope of accreditation is in accordance with the standard specifications outlined in the following page(s)

More information

Lubricant Service Designations for Automotive Manual Transmissions, Manual Transaxles, and Axles

Lubricant Service Designations for Automotive Manual Transmissions, Manual Transaxles, and Axles Lubricant Service Designations for Automotive Manual Transmissions, Manual Transaxles, and Axles API PUBLICATION 1560 SEVENTH EDITION, JULY 1995 American Petroleum Institute 1220 L Street, Northwest Washington,

More information

DMS-9202, Asphaltic Concrete Patching Material (Stockpile Storage)

DMS-9202, Asphaltic Concrete Patching Material (Stockpile Storage) Overview Effective Date: July 1999 July 2004 This specification shall govern for an asphaltic concrete mixture intended primarily as a cool to cold weather stockpile patching mix for maintenance. It shall

More information

Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan

Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan Accreditation No: Awarded to Attock Refinery Limited, Rawalpindi, Pakistan The scope of accreditation is in accordance with the standard specifications outlined in the following page(s) of this document.

More information

MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL

MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL INCH-POUND MIL-DTL-83767C 24 September 2007 SUPERSEDING MIL-L-83767B 8 February 1980 MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL Reactivated after 24 September 2007 and may be used

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 13738 Second edition 2011-07-01 Lubricants, industrial oils and related products (class L) Family E (Internal combustion engine oils) Specifications for two-stroke-cycle gasoline

More information

*** DRAFT *** Lubricant Service Designations for Automotive Manual Transmissions, Manual Transaxles, and Axles

*** DRAFT *** Lubricant Service Designations for Automotive Manual Transmissions, Manual Transaxles, and Axles *** DRAFT *** Lubricant Service Designations for Automotive Manual Transmissions, Manual Transaxles, and Axles API PUBLICATION 1560 EIGHTH EDITION, 2011 American Petroleum Institute 1220 L Street, Northwest

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510

More information

USES FOR RECYCLED OIL

USES FOR RECYCLED OIL USES FOR RECYCLED OIL What happens to your recycled used oil? Used oil, or 'sump oil' as it is sometimes called, should not be thrown away. Although it gets dirty, used oil can be cleaned of contaminants

More information

Report of Committee on Industrial Trucks

Report of Committee on Industrial Trucks 386 REPORT OF COMMITTEE ON INDUSTRIAL TRUCKS IT-1 Report of Committee on Industrial Trucks Robert P. Day, Chairman Factory Insurance Association 85 Woodland Street, Hartford, Connecticut 06105 O. S. Carliss,

More information

Fundamentals of Petroleum Refining Refinery Products. Lecturers: assistant teachers Kirgina Maria Vladimirovna Belinskaya Natalia Sergeevna

Fundamentals of Petroleum Refining Refinery Products. Lecturers: assistant teachers Kirgina Maria Vladimirovna Belinskaya Natalia Sergeevna Fundamentals of Petroleum Refining Refinery Products Lecturers: assistant teachers Kirgina Maria Vladimirovna Belinskaya Natalia Sergeevna 1 Refinery Products Composition There are specifications for over

More information

CIMAC Position Paper

CIMAC Position Paper 06 2015 CIMAC Position Paper New 0.10% sulphur marine (ECA) fuels Introduced to the market to meet the SO x ECA fuel sulphur specification of maximum 0.10% By CIMAC WG7 Fuels This publication is only for

More information

REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST

REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST 51858-2002 Characteristics Units Result Test Method Density (Specific Gravity) @ 20 C g /sm 3 0.870 ASTM D5002 Sulphur Content wt.% 1.8 ASTM D4294

More information

EAST AFRICAN STANDARD. Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY. HS (regular); HS

EAST AFRICAN STANDARD. Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY. HS (regular); HS EAST AFRICAN STANDARD Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY HS 2710.11.10(regular); HS 2710.11.10(premium) ICS 75.160.20 EAS 2011 Second Edition 2011 ii Table

More information

Physical Constants of Hydrocarbon and Non- Hydrocarbon Compounds

Physical Constants of Hydrocarbon and Non- Hydrocarbon Compounds Physical Constants of Hydrocarbon and Non- Hydrocarbon Compounds 2nd Edition Compiled by ASTM COMMITTEE D-2 ON PETROLEUM PRODUCTS AND LUBRICANTS AND THE AMERICAN PETROLEUM INSTITUTE'S REFINING DEPARTMENT

More information

PURE SYNTHETIC COMPRESSOR OIL ISO 22 THROUGH ISO 220

PURE SYNTHETIC COMPRESSOR OIL ISO 22 THROUGH ISO 220 PURE SYNTHETIC COMPRESSOR OIL #8 ISO 22 THROUGH ISO 2 Pure Synthetic Compressor Oil is a full synthetic, non-detergent, ashless, non-zinc containing anti-wear, rust and oxidation inhibited premium quality

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-33225-9 SOUTH AFRICAN NATIONAL STANDARD Automotive fuels Requirements and test methods for diesel WARNING This document references other documents normatively. Published by SABS Standards

More information

Prediction of Physical Properties and Cetane Number of Diesel Fuels and the Effect of Aromatic Hydrocarbons on These Entities

Prediction of Physical Properties and Cetane Number of Diesel Fuels and the Effect of Aromatic Hydrocarbons on These Entities [Regular Paper] Prediction of Physical Properties and Cetane Number of Diesel Fuels and the Effect of Aromatic Hydrocarbons on These Entities (Received March 13, 1995) The gross heat of combustion and

More information

Significance of Each Test. 1. Color (Visual)

Significance of Each Test. 1. Color (Visual) Significance of Each Test 1. Color (Visual) Determine the color of lubricant product by assessing the appearance of transmitted light appearance and intensity, as compare with a standard. Color alone is

More information

Lubricant Service Designations for Automotive Manual Transmissions, Manual Transaxles, and Axles

Lubricant Service Designations for Automotive Manual Transmissions, Manual Transaxles, and Axles Lubricant Service Designations for Automotive Manual Transmissions, Manual Transaxles, and Axles API PUBLICATION 1560 EIGHTH EDITION, 2012 SPECIAL NOTES 1. API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS

More information

ASTM International ASTM Committee F-20 on Oil Spills and Hazardous Materials. 15 June 2010 OPRC Conference London, England

ASTM International ASTM Committee F-20 on Oil Spills and Hazardous Materials. 15 June 2010 OPRC Conference London, England ASTM International ASTM Committee F-20 on Oil Spills and Hazardous Materials 15 June 2010 OPRC Conference London, England 1 What is ASTM International? A one-hundred-and-ten year old forum for the development

More information

ADOPTED REGULATION OF THE STATE BOARD OF AGRICULTURE. LCB File No. R Effective February 20, 2013

ADOPTED REGULATION OF THE STATE BOARD OF AGRICULTURE. LCB File No. R Effective February 20, 2013 ADOPTED REGULATION OF THE STATE BOARD OF AGRICULTURE LCB File No. R106-10 Effective February 20, 2013 EXPLANATION Matter in italics is new; matter in brackets [omitted material] is material to be omitted.

More information

Sampling kits and test suites

Sampling kits and test suites Shell LubeAnalyst Sampling kits and test suites Oil sampling kits and test suites Basic K1 - Transport Monitors wear & contamination Basic Plus K1+ - Transport Determines optimum drain intervals Differentials,

More information

Oregon Department of Transportation Standard Specifications For Asphalt Materials 2004

Oregon Department of Transportation Standard Specifications For Asphalt Materials 2004 Oregon Department of Transportation Standard Specifications For Asphalt Materials 2004 Effective for contracts and purchase orders advertised after January 1, 2004 Revisions - Changes to the 2003 Asphalt

More information

SYNTHETIC BASE STOCKS

SYNTHETIC BASE STOCKS Polybutenes Acetylene Black Performance mance Chemical Additiv Additives Polyalphaolefins Alkylate Fluids Refrigeration Fluids Dielectric Fluids Cable Flood, Fill & Gels SYNTHETIC BASE STOCKS Corrosion

More information

AGREEMENT CONCERNING THE ADOPTION OF UNIFORM CONDITIONS OF APPROVAL AND RECIPROCAL RECOGNITION OF APPROVAL FOR MOTOR VEHICLE EQUIPMENT AND PARTS

AGREEMENT CONCERNING THE ADOPTION OF UNIFORM CONDITIONS OF APPROVAL AND RECIPROCAL RECOGNITION OF APPROVAL FOR MOTOR VEHICLE EQUIPMENT AND PARTS E/ECE/TRANS/505A Rev.1/Add.39 /Amend.1 18 May 1988 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM CONDITIONS OF APPROVAL AND RECIPROCAL RECOGNITION OF APPROVAL FOR MOTOR VEHICLE EQUIPMENT AND PARTS done

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ICS 75.160.20 ISBN 0-626-17621-2 SANS 465:2005 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Standard specification for denatured fuel ethanol for blending with gasolines for use as automotive spark-ignition

More information

DMS ASPHALTIC CONCRETE PATCHING MATERIAL (STOCKPILE STORAGE)

DMS ASPHALTIC CONCRETE PATCHING MATERIAL (STOCKPILE STORAGE) DMS - 9202 (STOCKPILE STORAGE) EFFECTIVE DATES: AUGUST 2004 APRIL 2010. 9202.1. Description. This Specification governs for an asphaltic concrete mixture intended primarily as a cool to cold weather stockpile

More information

ASTM International 1

ASTM International 1 1 ASTM International ASTM INTERNATIONAL Organized in 1898 Independent, private sector, not-for-profit Provides a global forum for the development of voluntary, consensus standards and promotion of related

More information

GB Translated English of Chinese Standard: GB NATIONAL STANDARD

GB Translated English of Chinese Standard: GB NATIONAL STANDARD Translated English of Chinese Standard: GB18351-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 18351-2015 Replacing

More information

SECTION 916 (Pages ) is deleted and the following substituted: SECTION 916 BITUMINOUS MATERIALS

SECTION 916 (Pages ) is deleted and the following substituted: SECTION 916 BITUMINOUS MATERIALS 916 BITUMINOUS MATERIALS. (REV 7-28-03) (FA 1-13-04) (7-04) SECTION 916 (Pages 785-797) is deleted and the following substituted: SECTION 916 BITUMINOUS MATERIALS 916-1 Superpave PG Asphalt Binder: 916-1.1

More information

SHELLSOL D60. Shell Chemicals. Data Sheet. Lemont, IL Cotton Valley, LA. Product Name

SHELLSOL D60. Shell Chemicals. Data Sheet. Lemont, IL Cotton Valley, LA. Product Name Shell Chemicals Data Sheet Product Name SHELLSOL D60 This product is manufactured at more than one production site. The sales specifications of these products are the same, some typical data however may

More information

The purpose of this rule is to limit VOC emissions from the transfer of organic liquids.

The purpose of this rule is to limit VOC emissions from the transfer of organic liquids. RULE 4624 TRANSFER OF ORGANIC LIQUID (Adopted April 11, 1991; Amended September 19, 1991; Amended May 21, 1992; Amended December 17, 1992; Amended December 20, 2007) 1.0 Purpose The purpose of this rule

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510

More information

Thank you, Chairman Taylor, Chairman Keller, Representative Quinn and members of

Thank you, Chairman Taylor, Chairman Keller, Representative Quinn and members of Testimony of Andrew Daga President and CEO, Momentum Dynamics Corporation Pennsylvania House of Representatives Committee on Transportation November 13, 2017 Thank you, Chairman Taylor, Chairman Keller,

More information

ASTM International Committee E18 on SENSORY EVALUATION. more than meets the eye. ASTM Committee E18.

ASTM International Committee E18 on SENSORY EVALUATION. more than meets the eye. ASTM Committee E18. ASTM International Committee E18 on SENSORY EVALUATION more than meets the eye www.astm.org High Standards for PERCEPTION Since 1960, on Sensory Evaluation has been promoting knowledge, stimulating research,

More information

T. Jafari Behbahani, H. Talachi & M. Taymori

T. Jafari Behbahani, H. Talachi & M. Taymori -,,,, STUDY OF LIQUID SOLVENT DEASPHALTING OF HEAVY RESIDUES T. Jafari Behbahani, H. Talachi & M. Taymori Research Institute of Petroleum Industry (RIPI), Tehran, Iran, jafarit@ripi.ir Abstract: In the

More information

T. Jafari Behbahani, H. Talachi & M. Taymori

T. Jafari Behbahani, H. Talachi & M. Taymori -,,,, STUDY OF LIQUID SOLVENT DEASPHALTING OF HEAVY RESIDUES T. Jafari Behbahani, H. Talachi & M. Taymori Research Institute of Petroleum Industry (RIPI), Tehran, Iran, jafarit@ripi.ir Abstract: In the

More information

Copyright Statement FPC International, Inc

Copyright Statement FPC International, Inc Copyright Statement All rights reserved. All material in this document is, unless otherwise stated, the property of FPC International, Inc. Copyright and other intellectual property laws protect these

More information

Project Reference No.: 40S_B_MTECH_007

Project Reference No.: 40S_B_MTECH_007 PRODUCTION OF BIODIESEL FROM DAIRY WASH WATER SCUM THROUGH HETEROGENEOUS CATALYST AND PERFORMANCE EVALUATION OF TBC DIESEL ENGINE FOR DIFFERENT DIESEL AND METHANOL BLEND RATIOS Project Reference No.: 40S_B_MTECH_007

More information

Standard Specification for ASTM Thermometers 1

Standard Specification for ASTM Thermometers 1 Contact International (www.astm.org) for the latest information. Designation: Method 9501 Federal Test Method Standard No. 791b Standard Specification for Thermometers 1 This standard is issued under the

More information

6. Lone Star NGL Mont Belvieu LP E/P Mix November 16, Lone Star NGL Mont Belvieu LP Refinery Grade Butane November 29, 2012

6. Lone Star NGL Mont Belvieu LP E/P Mix November 16, Lone Star NGL Mont Belvieu LP Refinery Grade Butane November 29, 2012 LONE STAR NGL LLC PURITY TABLE OF CONTENTS UPDATED AS OF: MARCH 4, 2013 ISSUING ENTITIES DATE 1. Ethane (Purity Ethane) November 29, 2012 2. 3. Propane November 28, 2012 Isobutane November 29, 2012 4.

More information

EAST AFRICAN STANDARD

EAST AFRICAN STANDARD DEAS 186:2013 ICS 71.100.40 Toilet soap Specification EAST AFRICAN STANDARD EAST AFRICAN COMMUNITY HS 3401.11.0000 EAS 2013 Second Edition 2013 Table of contents 1 Scope... 1 2 Normative references...

More information