Dimensions for motor Type 9
|
|
- Blaise McDowell
- 6 years ago
- Views:
Transcription
1 4 Dimensions for motor A B Changeable drive adapter. Standard drive adapters 20mm, variations possible Grub screw (for changing motor bolt) l50 l48 Plug-In cable with standard 16 x 10mm bolt (short side) with standard 16 x 10mm bolt (long side) x10 16x10 10x10 16x16 4 Type Also includes electronic versions ending with: Dimension Dimension A B 9/05 K 9/1.3 K ACS-E ACS-E, ACS-868, ACS-SMI, CSJR-SMI, CSJR-DMI 9/05 9/ CSM-E, CSM-868, CSM-F-868, CSM-SMI ACS-E, ACS-868, ACS-SMI, CSJR-SMI, CSJR-DMI 9/ CSM-E, CSM-868, CSM-F-868, CSM-SMI ACS-E, CSJR-SMI, CSJR-DMI 9/4 9/ CSM-E, CSM-868, CSM-F-868, CSM-SMI 9/05/ /05/25 9/1.3/25 CSM-E, CSM-868, CSM-F-868, DMS with optional 10 x 10mm bolt (# ) maximum 30 Nm with optional 16 x 16mm bolt (# ) dimensions and technical data subject to changes
2 Technical data for motor Type Max. Max. lifting Smallest Speed Max. limit Side Voltage Current Power Running Ingress VDE-EMC VDE CE torque capacity clear inside switch space 50 Hz time protection approved approved approved on 50 mm diameter range require- interoutside of tube ment mittent dia. tube Nm N mm rpm turns mm volt ampere watts min. IP 9/ Z /05/ * Z /05 K Z / * Z /08 K Z /1/ * Z / Z /1.3/ * Z /1.3 K Z / Z / Z / Z / Z / Z /05k ACS-E Z 0, /08k ACS-E Z 0, /1.3k ACS-E Z 0, /05 ACS-E Z 0, /08 ACS-E Z 0, /08 ACS Z /1.3 ACS-E Z 0, /1.3 ACS Z /2 ACS-E Z /2 ACS Z 0, /2.5 ACS-E Z 0, /3 ACS-E Z 1, /3 ACS Z 1, /4 ACS-E Z 1, /05 CSM-E Z 0, /05/25 CSM-F Z 0, /08 CSM-E Z 0, /1/25 CSM-E Z 0, /1/25 CSM Z 0, /1/25 CSM-F Z 0, /1.3 CSM-E Z 0, /1.3 CSM Z 0, /1.3 CSM-F Z 0, /1.3/25 CSM-E Z 0, /2 CSM-E Z 0, /2.5 CSM-E Z 0, /2.5 CSM Z 0, /2.5 CSM-F Z 0, /3 CSM-E Z 1, /3 CSM Z 1, /3 CSM-F Z 1, /4 CSM-E Z 1, /4 CSM Z 1, /4 CSM-F Z 1, /5 CSM-E Z 1, Motors for different Voltages ( V) and frequencies (50 60 Hz) are available. Contact us for more information. Radio motors are alternatively available with MHz. Contact us for more information. * On request available with 32 turns limit switch range. dimensions and technical data subject to changes 25
3 Technical data and dimensions for motor NHK with manual override limit switch adjusting screw hexagon 4 mm X hexagon socket SW7 Optional square bolt Type A B C 9/ NHK /3.3 4 NHK /5 NHK interchangeable drive wheel X = Dimension depending on drive adapter in use. Dimensions available on request. l 12.5 x 18.5 depth with plug-in cable! Wall bracket Technical data 7 mm hexagonal with awning eyelet Wall bracket Built-on roller shutter Type Max. Lifting Smallest Speed Max. limit Side Voltage Current Power Running Ingress Manual VDE-EMC VDE CE torque capacity clear inside switch space 50 Hz time protection override approved approved approved on diameter range require- intermittent splash gear smallest of tube in one ment water ratio tube direction proof Nm N mm rpm turns mm volt amps watts min. IP Counterpart support for adapter cone hinged crank handle with counterpart support an 7 mm hexagonal Counterpart support with awning eyelet /08 NHK Z : 1 9/1.3 NHK Z : 1 9/2 NHK Z : 1 9/2.5 NHK Z : 1 9/3 NHK Z : 1 9/4 NHK Z : 1 9/5 NHK Z : 1 Motors for different Voltages ( V) and frequencies (50-60 Hz) are available. Contact us for more information. 26 dimensions and technical data subject to changes
4 motors (50 mm tubes and bigger) Item Number Type/Item Description Motor with mechanical limit switch 230 V/50 Hz smallest clear inside diameter of tube: 47 mm motor bolt 16 x 10 mm, 1.5 m connecting cable /05, torque 5 Nm, 14 rpm /05/68, torque 5 Nm, 25 rpm /05 K*, torque 5 Nm, 14 rpm /08, torque 8 Nm, 14 rpm /08 K*, torque 8 Nm, 14 rpm /1/25, torque 10 Nm, 25 rpm /1.3, torque 13 Nm, 14 rpm /1.3/25, torque 13 Nm, 25 rpm /1.3 K*, torque 13 Nm, 14 rpm /2, torque 20 Nm, 14 rpm /2.5, torque 25 Nm, 14 rpm /3, torque 30 Nm, 14 rpm /4, torque 40 Nm, 14 rpm /5, torque 50 Nm, 10 rpm *Short version (dimensions on page 24) Motor with mechanical limit switch and manual override 230 V/50 Hz, smallest clear inside diameter of tube: 47 mm motor bolt 16 x 16 mm 1.5 m connecting cable /08 NHK, torque 8 Nm, 14 rpm /1.3 NHK, torque 13 Nm, 14 rpm /2 NHK, torque 20 Nm, 14 rpm /2.5 NHK, torque 25 Nm, 14 rpm /3 NHK, torque 30 Nm, 14 rpm Drive adapters (on page 30) Wall brackets (on page 31-32) Switches (on page 84) Manual override accessories (on page 63) and brackets (on page 63) /4 NHK, torque 40 Nm, 14 rpm /5 NHK, torque 50 Nm, 10 rpm Motors for different Voltages ( V) and frequencies (50 60 Hz) are available. Contact us for more information. dimensions and technical data subject to changes 27
5 motors (50 mm tubes and bigger) Item Number Type/Item Description ACS-E roller shutter drive with electronic obstacle detection (Torque stop on top, limited or self learning on bottom) 230 V/50 Hz, smallest clear inside diameter of tube: 48 mm profile tubes, motor bolt 16 x 10 mm 1.5 m connecting cable /05 ACS-E torque 5 Nm, 14 rpm /05 K* ACS-E torque 5 Nm, 14 rpm /08 ACS-E torque 8 Nm, 14 rpm /08 K* ACS-E torque 8 Nm, 14 rpm Prices do not include drive adapters wall brackets (motor brackets) switches /1.3 ACS-E torque 13 Nm, 14 rpm /1.3 K* ACS-E torque 13 Nm, 14 rpm /2 ACS-E torque 20 Nm, 14 rpm /2.5 ACS-E torque 25 Nm, 14 rpm /3 ACS-E torque 30 Nm, 14 rpm /4 ACS-E torque 40 Nm, 14 rpm * short version (for dimensions see page 24) ACS-868 roller shutter drive with electronic obstacle detection and built in radio receiver 868 MHz (Torque stop on top, limited or self learning on bottom) 230 V/50 Hz, smallest clear inside diameter of tube: 48 mm profile tubes, motor bolt 16 x 10 mm 1.5 m connecting cable /08 ACS-868, torque 8 Nm, 14 rpm /1.3 ACS-868, torque 13 Nm, 14 rpm /2 ACS-868, torque 20 Nm, 14 rpm /3 ACS-868, torque 30 Nm, 14 rpm Drive adapters (on page 30) Wall brackets (on page 31-32) Switches (on page 84) Radio transmitters (on page 77-79) Motors for different Voltages ( V) and frequencies (50 60 Hz) are available. Radio motors are alternatively available with MHz. Contact us for more information. 28 dimensions and technical data subject to changes
6 motors (50 mm tubes and bigger) Item Number Type/Item Description CSM-E awning drive with electronic limits (Torque stop on top, limited or self learning on bottom) 230 V/50 Hz, smallest clear inside diameter of tube: 47 mm, motor bolt 16 x 10 mm, 1.5 m connecting cable /05 CSM-E torque 5 Nm, 14 rpm /08 CSM-E torque 8 Nm, 14 rpm /1/25 CSM-E torque 10 Nm, 25 rpm /1.3 CSM-E torque 13 Nm, 14 rpm /1.3/25 CSM-E torque 13 Nm, 25 rpm /2 CSM-E torque 20 Nm, 14 rpm /2.5 CSM-E torque 25 Nm, 14 rpm /3 CSM-E torque 30 Nm, 14 rpm /4 CSM-E torque 40 Nm, 14 rpm CSM-868 awning drive with electronic limits and built in radio receiver 868 MHz (Torque stop on top, limited or self learning on bottom) Voltage, diameter, bolt and cable same as CSM-E motor /05/25 CSM-868 torque 5 Nm, 25 rpm /1/25 CSM-868 torque 10 Nm, 25 rpm /1.3 CSM-868 torque 13 Nm, 14 rpm /2.5 CSM-868 torque 25 Nm, 14 rpm /3 CSM-868 torque 30 Nm, 14 rpm /4 CSM-868 torque 40 Nm, 14 rpm CSM-F-868 awning drive with electronic limits and built in radio receiver 868 MHz (Electronically limited on to and bottom) Voltage, diameter, bolt and cable same as CSM-E motor /05/25 CSM-F-868 torque 5 Nm, 25 rpm /1/25 CSM-F-868 torque 10 Nm, 25 rpm /1.3 CSM-F-868 torque 13 Nm, 14 rpm /2.5 CSM-F-868 torque 25 Nm, 14 rpm /3 CSM-F-868 torque 30 Nm, 14 rpm /4 CSM-F-868 torque 40 Nm, 14 rpm Alternative motor bolts for all motors, except NHK x 10 mm, max. 30 Nm Drive adapters (on page 30) Wall brackets (on page 31-32) Switches (on page 84) Radio transmitters (on page 77-79) x 16 mm, to suit T11 motor brackets (page 18 & 48). Dimensions designed to replace Type 11with motor without change in bracket and spacing. Motors for different Voltages ( V) and frequencies (50 60 Hz) are available. Radio motors are alternatively available with MHz. Contact us for more information. dimensions and technical data subject to changes 29
7 drive adapters Item Number Type/Item Description drive wheel limit switch crown For 1:1 scaled drive adapter outlines for easy matching with your tube refer to Page for Notch & Profile tubes Page for hexagonal and octagonal tubes Drive adapters for Round and Notch tubes includes drive wheel and limit switch crown Ø 50 x 1.5 mm round tube not for ACS-E, wheel only Ø 50 mm round tube (Siral) not for ACS-E, wheel only Ø 55 mm elero profile tube Ø 57 mm aluminium profile tube (MHZ, Ates) Ø 58 mm aluminium profile tube (Thermo Perco) Ø 60 mm profile tube (Alu-Plastik) Ø 60 profile/ notch tube (Griesser, Hüppe, Carros) Ø 60 x 1.5 & 62 x 2 mm round tube Ø 62 mm notch tube Ø 62 mm profile tube (LeProfil, Krülland) Ø 63 x 1.5 mm round tube Ø 63 x 1 mm notch tube (Welser) Ø 63 mm notch tube Ø 64 mm profile tube (Zurflüh-Feller) Ø 65 mm profile tube (HOOS) Ø 65 mm profile tube (IMBAC, Metalpress, Eckermann) Ø 67.5 x 1.5 mm profile tube (MHZ) Ø 70 x 1.5 mm round tube Ø 70 x 1 mm notch tube (MHZ) Ø 70 mm notch tube (round notch) Ø 70 mm notch tube Ø 70 mm notch tube (Imbac, Ahlquist) Ø 70 mm decagonal notch tube (Perma) Ø 70 mm notch tube (Griesser) Ø 70 mm notch tube (Welser) ooo1 Ø 71 x 1.5 mm notch tube (Hassinger) Ø 74 mm notch tube Ø 76 x 1.2 mm profile tube Kittelberger Ø 78 mm notch tube Ø 78 mm notch tube (Döhner/Hassinger) Ø 78 mm notch tube (MHZ) Ø 78 x 1 mm notch tube Ø 80 mm Zurflüh Ø 83 x 1.5 mm round tube Ø 85 mm notch tube Ø 85 mm notch tube (Griesser) Ø 90 mm wide notch tube (Le Profil) Ø 90.5 x 1.25 mm notch tube (MHZ) Ø 102 x 1.5 mm round tube Ø 135 x 2.5 mm round tube Octagonal and hexagonal drive adapters x 1.5 mm octagonal (Rau, not for ACS-E) mm octagonal (Selve) mm hexagonal (Butzbach, Mäule) mm octagonal (Imbac) mm octagonal (Selve, Döhner, Eckermann) mm octagonal (Martin) mm octagonal (Bonfonte) mm octagonal (Selve, Döhner, Eckermann) mm hexagonal (Butzbach, Mäule) Pentagonal tube (Meimo) 30 dimensions and technical data subject to changes
8 wall brackets Item Number Type/Item Description White plastic adapter for any brackets with 16 x 16 mm (page 18 & 48) to convert to 16 x 10 mm ( motors) M6 Wall brackets (motor bracket) Wall bracket (10 x 16 mm), limbus Ø 48 mm M Wall bracket (10 x 16 mm), limbus Ø 60 mm screw thread M M Flat wall bracket (2x 10 x 16 mm), limbus Ø 48 mm 40 Wall brackets (motor bracket) Universal wall bracket (10 x 16 mm), disengageable Metal wall bracket (10 x 16 mm), with rubber damping Spring "Clip-in" wall bracket (10 x 16 mm), limbus Ø 48 mm Closed wall bracket (2x 10 x 16 mm) brace Wall bracket (2x 10 x 16 mm), cross, for plastering into wall Forked wall bracket (10 x 16 mm) Mounting plate for motor bracket type 8 and type 9 (Stakusit) Mounting plate for motor bracket type 8 and type 9 (Thyssen, Schüco, Brügmann, Home, VEKA) 78 mm l 93 mm 48 mm Universal mounting plate for type 8 & 9 brackets 60 mm Mounting plate with motor bracket (for Thyssen, Schüco, Veka, Home) dimensions and technical data subject to changes 31
9 48 wall brackets Item Number Type/Item Description Motor bracket to place over 12 mm centre pin, with torque support for pre-mounting units ( mm) up to 30 Nm Special wall bracket type 9 for Elket overhead-mounting units up to 20 Nm 6, Base plate with motor bracket type Clamping bracket onto roller bearing support for type 9 motors with max. 25 Nm torque. 30 Nm torque in conjunction with plastered bearing support Wall bracket for type 9 up to 20 Nm only for mini roller shutter cases with bolts up to Ø 12 mm Plastic wall bracket for pre-mounting units, complete with steel base plate, spring clip and bracket for type 9 drives with max. 25 Nm torque As above, plastic bracket only Aluminium wall bracket for pre-mounting units, complete with steel base plate, spring clip and bracket for all type 9 drives Same dimensions as # As above, aluminium bracket only Same dimensions as bracket # dimensions and technical data subject to changes
10 Drive adapters for type 9 motors Round and profil tubes Profiles for drive adapters. Scale 1 : 1 ø 50 x 1.5 mm round tube x 1.5 Siral ø 55 mm profile tube, round ø 57 mm Ates aluminium profile tube ø 58 mm profile tube Thermo Perco ø 62 x 2 mm, ø 60 x 1.5 mm round tube dimensions and technical data subject to changes 33
11 Drive adapters for type 9 motors Round and profil tubes Profiles for drive adapters. Scale 1 : 1 ø 60 x 1 mm profile tube (Alu-Plastik) ø 63 mm, Griesser, Hüppe, Ø 62 mm Le Profil + Krülland ø 62 mm round tube ø 63 x 1.5 mm round tube mm notch tube mm notch tube ø 64 mm Zurflüh-Feller dimensions and technical data subject to changes
12 Drive adapters for type 9 motors Round and profil tubes Profiles for drive adapters. Scale 1 : 1 ø 65 mm Hoos ø 65 mm Imbac, Metallpress, Eckermann ø 67.5 x 1.5 mm, MHZ ø 70 x 1.5 mm, round tube ø 70 x 1 mm, MHZ ø 70 mm notch tube (round notch) ø 70 mm notch tube dimensions and technical data subject to changes 35
13 Drive adapters for type 9 motors Round and profil tubes Profiles for drive adapters. Scale 1 : 1 ø 70 mm notch tube (Imbac, Ahlquist) Ø 70 mm, notch tube (Perma) 70 x 0.7 mm, decagonal ø 70 mm notch tube (Griesser) Ø 70 mm notch tube ø 71 x 1.5 mm Hassinger ø 74 mm notch tube ø 76 x 1.2 mm Kittelberger dimensions and technical data subject to changes
14 Drive adapters for type 9 motors Round and profil tubes Profiles for drive adapters. Scale 1 : 1 Ø 83 x 1.5 mm round tube ø 85 x 1 mm notch tube ø 85 mm round tube (Griesser) Ø 90 mm LeProfil, Ø 89 mm Deprat dimensions and technical data subject to changes
15 Drive adapters for type 9 motors Round and profil tubes Profiles for drive adapters. Scale 1 : 1 Ø 90.5 x 1.25 mm, MHZ ø 102 x 1.5 mm round tube ø 135 x 2.5 mm round tube dimensions and technical data subject to changes 39
16 Drive adapters for type 9 motors Hexagonal and octagonal tubes Profiles for drive adapters. Scale 1 : 1 50 x 1.5 mm octagonal, Rau Flats 50 mm Selve octagonal mm Butzbach, Mäule hexagonal Flats 60 mm Imbac octagonal Flats 60 mm, octagonal, Döhner, Selve, Eckermann, Heizmann Flats 60 mm Martin octagonal dimensions and technical data subject to changes
17 Drive adapters for type 9 motors Hexagonal and octagonal tubes Profiles for drive adapters. Scale 1 : 1 Flats 60, octagonal Bonfante x 1 mm Selve, Eckermann octagonal mm Butzbach / Mäule hexagonal mm, Meimo pentagonal dimensions and technical data subject to changes 41
Drives and controls. for intelligent building technology
2015 Drives and controls for intelligent building technology 2015 Drives and controls for intelligent building technology Tubular drives Venetian blind drives Speciality drives Home automation Controls
More informationTechnology Versatility Practicality
Tubular motors Technology Versatility Practicality TECHNOLOGICAL SOLUTIONS FOR SECURE OPERATION Tubular gearmotors (Ø 3mm and Ø mm) equipped with an encoder and an electronic limit switch for total control
More informationIndex 01 NEWS NEWS 2007/2008 GENERAL CATALOGUE TUBULAR MOTORS AND ACCESSORIES FOR AWNINGS AND ROLLER SHUTTERS A NAME, A BRAND, A COMPANY A WELL DEFINE
Main catalogue - www.cherubini.it 2007 september edition www.lapianacom.it MOTION SYSTEMS FOR SOLAR PROTECTION Via Adige, 55 081 Bedizzole (BS) italy tel. +9 00 6872.09 fax +9 00 6872.00 Tubular Motors
More informationOperators Type /24 DC and 120V-60Hz AC
Type 3.5 12/24 DC and 120V-60Hz AC -Fits in 1.5" or 1.75" tube (120V) (120V) 2 38.2 29 470 433 12 Volt Reference Torque Speed Watts Amps Limit Switch (in. lb./nm) (rpm) (max. turns) 2004981 26 3 30 32
More informationACCESSORIES. adapters SERIES Ø35 p. 134 SERIES Ø45 p. 135 SERIES Ø58 p brackets
ACCESSORIES adapters SERIES Ø p. SERIES Ø p. SERIES Ø p. s Series Ø p. Series Ø - Ocean - Plug&Play Ocean Easy p. 9 Series Ø - Wave RX - Wave Wire - Senso RX - Senso Wire - Garda p. Series Ø - Roll - Micro
More informationELEKTROMATEN SI Rapid Safedrive. Emergency manual operation. Door controls. Limit switches. Mounting. Special versions. Series SG63F SI 17.
SI Rapid Safedrive For driving: High-speed sectional doors and high-speed rolling doors which require an anti-fallback device Series SG6F SI 7. Series SI 5. - SI 0. SI 0.70 - SI 8.6 Series SG5F SI 60.
More informationtubular motors guidelines for choosing a motor motors Ø 35 motors Ø 45 motors Ø 58 fast motors innovative fixing-system tubular motors p.
guidelines for choosing a p. 20 s Ø 35 Motor with wire control - Mechanical limit switch ROLL Ø35 p. 22 Motor with built-in receiver - Electronic limit switch WAVE RX Ø35 p. 24 Motor with built-in receiver
More informationSilent Gliss. Roller Blind Systems
Roller Blind Systems 2 Motorised Roller Blind System Product Information Medium duty motorised roller blind system for contract and rential applications Fixed switch or optional radio remote control The
More informationELEKTROMATEN ST Sliding-door-drive
ST Sliding-door-drive for sliding doors ST 9.5 ST 80. Output torque: 90-800 Nm Output speed: 5 - rpm Control panels for ST WS 905 / TS 00.0.0 Subject to alterations. (_Db).000 ST Sliding-door-drive For
More informationGearing Revolution Brushless Concept
Motors and Controls Gearing Revolution Brushless Concept Side Range completion Controls Enhancement Gearing Revolution A true revolution in the tubular motor industry. Our gear is now the quietest technology
More informationTypical Roll Shutter Hood* Assembly
Typical Roll Shutter Hood* Assembly Override Motor * Various Hood sizes, styles & colors listed on Hurricane p34 Hurricane 26 website: www.easternmetal.com e-mail: info@easternmetal.com version: 11/05/13
More informationDICTATOR RTS Tube Door Closer
DICTATOR RTS Tube Door Closer The "Invisible" Door Closer The DICTATOR RTS tube door closer is virtually invisible because being built into the door. The joint can only be seen when the door is open. The
More informationR1000-R1500 Range. Automatic Labelling Machine. Wine Industry
R1000-R1500 Range Automatic Labelling Machine Wine Industry R1000 - R1500 Range Automatic Labelling Machine General Description The R1000-R1500 range enables up to 4 labels applications and the crimping
More informationSilent Gliss. Electric Curtain Track Systems
Electric Curtain Track Systems 2 Electric Curtain Track System Autoglide Product Information Electric Curtain Track System Silent Gliss for light to medium weight curtains. This system is powered by a
More informationSilent Gliss. Electric Curtain Track Systems
Electric Curtain Track Systems 2 Electric Curtain Track System Autoglide Product Information Electric Curtain Track System Silent Gliss for light to medium weight curtains. This system is powered by a
More informationTABLE OF CONTENTS
TABLE OF CONTENTS THE NEW GENERATION OF A PROVEN CONCEPT (RTS) ALTUS (RTS) THE SOMFY RANGE DIMENSIONS SOMFY LV5/LW5/LT5/LT8 DC S SOMFY LS40/LT50/LT/FTS/SLT SOMFY LT50/LT CMO, LT50 RH, LT50 ILT and LT50
More informationCassette awning markilux 6000
A designer cassette awning that is individually modifiable in both colour and specification. The enormous variety of combinations of both the visual and technical aspects makes this awning unique. Product
More informationwww.cherubini-group.com 2014 GB Passion is the driving force behind our work Our tocco italiano...is a positive attitude to life....is a passionate approach to the world....is an ingenious way of doing
More informationTime scale: from 0.05s to 100h Multi-function Plug-in for use with 90.02, 90.03, and sockets
86 Series - Timer modules Features 86.00 86.30 Timer modules for use in conjunction with relay & socket. 86.00 - Multi-function & multi-voltage timer module 86.30 - Bi-function & multi-voltage timer module
More informationAutomations for garage doors and rolling shutters
Automations for garage doors and rolling shutters Technology Versatility Low consumption BLINKO Flashing LED Technological solutions for safe operation All V2 operators for garage doors allow: - Precise
More informationShaft mounted rolling door drives DFM/DFE 100, 170, 250, 350, 500 and 750 WFM/WFE 170
Shaft mounted rolling door drives DFM/DFE 100, 170, 250, 350, 500 and 750 WFM/WFE 170 Assembly instructions (translation) DIN EN ISO 9001: 2008 Certificate 01 100 070016/03 For the safety of persons it
More informationSlide gate openers MOVEMENT BRINGS MORE
Slide gate openers MOVEMENT BRINGS MORE Our standard. Responsible production. - 2 - Our tradition. Striving for perfection. 30 years of experience made ELKA one of the leading companies in the field of
More informationRolling door drives and controls robust and safe
Rolling door drives and controls robust and safe A lot of advantages The robust elero door drives are available in different versions. Combined with equal controls they offer a solution for almost every
More informationimmagine n codice descrizione prezzo Motors
immagine n codice descrizione prezzo Motors T-ONE - Ø45mm Tubolar motors with electronic limit switch and integrated radio for ROLLING SHUTTERS 1 MTE45102 10 Nm for rolling shutters. 180,00 1 MTE45152
More informationHanging Cabinets & Accessories
.0 Hanging Cabinets & Accessories.1 Blum AVENTOS HK-Stay lift for wooden fronts or wide alu frames Material: Steel mechanism, plastic cover caps Finish: Mechanism galvanized, cover cap grey Adjustment:
More informationunipark Parking space saver operator for single CAR space. Gearmotors 24 V DC
unipark Parking space saver operator for single CAR space. Gearmotors 24 V DC 1 1 Control panel 2 UNIP+ARK1 2 3 Max distance from the loop to the UNIPARK 2 m 3 guaranteed parking, with Unipark. Ideal for
More informationThe world of SOMMER garage door operators
The world of SOMMER garage door operators www.sommer.eu The SOMMER garage door operators: Numerous fields of application SOMMER garage door operators are suitable for the following types of door: Sectional
More informationOpen style folding-arm awning markilux 930 swing. The designer awning with unique pitch adjustment mechanism. markilux.com
The designer awning with unique pitch adjustment mechanism. Product characteristics 3 1 2 1 face fixture 1 top fixture top fixture 1 view from the rear during extension, pitch at 45 pitch adjustment range
More informationDitec PWR Automation system for swing gates with wings up to 5 metres
SAFE 24 V VIRTUAL ENCODER EASY TO INSTALL COMPLETE RANGE Ditec PWR Automation system for swing gates with wings up to 5 metres EN www.entrematic.com Ditec PWR a complete range Ditec PWR is the new range
More informationTime scale: from 0.05 s to 100 h Multi-function Plug-in for use with 96 series sockets. Relay + socket. Wiring diagram (without control signal)
86 Timer modules 86 Timer modules for use in conjunction with relay & socket. 86.00T - Multi-function & multi-voltage timer module 86.30T - Bi-function & multi-voltage timer module Complies with EN 45545-2:2013
More informationJdB cassette. Version 1.03 Sun Protection AVZ 3J.1
Version 1.0 Sun Protection AVZ J.1 J.2 Sun Protection AVZ Version 1.0 4211 424-000 Alu wall bracket JdB 95 mm Mill finish 4211 424-006 Idem RAL 9010 pure white 4211 424-755 Idem (* = Textured) RAL 7016
More information90 Series - Socket overview for 60 series relays
90 Series - Socket overview for 0 series relays See page 90 90.0 99.0 90.0 0. Screw terminal (Box clamp) socket Panel or mm rail - Coil indication and EMC 90.0 0. Double terminal (EN 00) mount suppression
More informationground cones Ground Sockets screw thread tubes spehrical joints stoppers tubing connectors universal connectors interchangeable GLASSWARE
ground cones Ground Sockets screw thread tubes spehrical joints stoppers tubing connectors universal connectors interchangeable GLASSWARE 2 Cones 1001 Acc. to DIN 12249 form B and in addition to standard,
More informationamp ramp Operators Manual Page 1 Saftronics 2S Ltd Turnbridge Mills Quay Street Huddersfield West Yorkshire HD1 6QT
amp ramp Operators Manual Saftronics S Ltd Turnbridge Mills Quay Street Huddersfield West Yorkshire HD 6QT Tel: 0484 530893 Fax: 0484 550500 Website:www.saftronics.co.uk E-Mail: sales@saftronics.co.uk
More informationACCESSORI PER VENEZIANE KOMPONENTEN FÜR JALOUSIEN ACCESSORIES FOR VENETIAN BLINDS COMPOSANTS POUR STORES A LAMELLES ACCESORIOS PARA VENECIANA
ACCESSORI PER VENEZIANE KOMPONENTEN FÜR JALOUSIEN ACCESSORIES FOR VENETIAN BLINDS COMPOSANTS POUR STORES A LAMELLES ACCESORIOS PARA VENECIANA ACCESSORI PER AVVOLGIBILI KOMPONENTEN FÜR ROLLLADEN ACCESSORIES
More informationCatalogue Operators for awnings, winding shutters and blinds
Catalogue Operators for awnings, winding shutters and blinds 4 4 Operators for: Awnings, winding shutters and blinds Summary 6 ART Advanced Revolution Technology 6 Came means group power 7 home evolution
More informationSilent Gliss. Roller Blind Systems
Roller Blind Systems 2 Electrically Operated Roller Blind System Product Information Medium/medium-heavy duty motorised roller blind system, ideal for contract applications Connected systems can be mounted
More informationaccess
184 Table of Contents Access Garage door Motors Dexxo Pro 800 RTS... 188 Dexxo Pro 1000 RTS... 189 Dexxo Optimo RTS... 190 Receiver Axroll NS... 191 Freeroll ESE RTS, RTS receiver for roller garage doors...
More informationMotorized Drapery Track
The Glystro Drapery Motor: Motorized Drapery With smooth operation and noise reduction technology, the Glystro motor is designed to automate drapery window coverings, while offering a variety of control
More informationSOLAR MOTORIZATION AUTOSUN 2
SOLAR MOTORIZATION AUTOSUN 2 RENO TRADI TUNNEL CWS THE SOLAR SOLUTION 100% AUTONOMOUS, WITHOUT WORK Autonomous motorization system for roof and facade roller shutters, operating with solar energy, a free,
More informationProportional Solenoids for Hydraulics G RC Y 037, 045, 063
Proportional Solenoids for Hydraulics 4 Product group G RC Y 037, 045, 063 According to DIN VDE 0580 Armature space pressure tight Nominal operating pressure (dynamic) Magnetic force vs stroke graph horizontal
More information3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
More informationIP44 - IP66 Rated RCD, Power & Cable Management
IP44 - IP66 Rated RCD, Power & Cable Management IP54 Rated 10 amp Switches IP66 Rated 10 amp Switches IP66 Rated 13 amp Sockets IP66 13 amp RCD switched Socket IP66 13 amp unswitched socket with timer
More informationBAYT 980. Oil-hydraulic OIL-HYDRAULIC BARRIER FOR TRAFFIC CONTROL INSTALLATION MANUAL. code 4425 Post with fixing base. POLO 44 - optional -
Oleodinamica BAYT 980 Oil-hydraulic OIL-HYDRAULIC BARRIER FOR TRAFFIC CONTROL POLO 44 - optional - BAYT 980 560 code 4425 Post with fixing base the gate opener Made in Italy INSTALLATION MANUAL GB INSTRUCTIONS
More informationELEKTROMATEN SI FI Safedrive with built-on frequency inverter
SI FI Safedrive with built-on frequency inverter For driving: High-speed sectional doors and high-speed rolling doors which require an anti-fallback device Series SGF SI,.0 FI - SI.0 FI Series SG8F SI
More informationLocks and Catches Information
Information SYMO 3000 is the worldwide unique furniture locking system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum expenditure and effort. The
More informationstainless steel Cover hinge The cover hinge is simply screwed to the box protection channel and to the edge fold. Model No. KL
aus HB, S. 46 The Rittal range of terminal boxes offers 44 practical designs, developed and improved in constant dialogue with users. Whether with or without gland plates, in stainless steel, EMC version
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G V
Description Single and two pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast magnetic only or hydraulically delayed switching characteristics
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More informationGULLIVER BS SERIES. Low NOx One Stage Gas Burners FIRING RATES. BS kw BS kw BS kw BS kw.
The Riello Gulliver BS series of one stage gas burners, is a complete range of Low NOx emission products, developed to respond to any request for home heating, conforming to the most severe standards regarding
More informationEasy. Easier. Mhouse.
Easy. Easier. Mhouse. The revolutionary system for automating your home in an incredibly quick and easy way. Now even with solar energy supply. SOLAR POWER Mhouse self fit Kit: everything s easy, everything
More informationWindow Fittings Sliding/Folding Fittings
Folding window fitting Fold 35 Features For timber door frames For 2- to 6-leaf folding doors Floating suites possible Full corrosion resistant construction, ideal for coastal applications Concealed channel
More informationPIN VICES 02 2 DRILL 02 9 CUTTING BROACHES SMOOTHING BROACHES 02 13
02 PIN VICES 02 2 DRILL 02 9 CUTTING BROACHES 02 10 SMOOTHING BROACHES 02 13 PIN VICES i Pin vices are used to firmly hold items such as winding stems, cutting and smoothing broaches, drills, taps, wires,
More information1329I Integrated Drive/Motor CE Filter Option Kit
Instruction Sheet 1329I Integrated Drive/Motor CE Filter Option Kit CE filter options are designed to be used with the 1329I Integrated Drive/Motor. The main function of the CE filter is to reduce the
More information1 Safety instructions. 2 Device components. Blinds Management Motor control insert Universal AC 230 V ~ Art. No. 232 ME. Operating instructions
Art. No. 232 ME Operating instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Serious injuries, fire or property damage possible. Please
More informationGULLIVER BSD SERIES. Low NOx Two Stage Gas Burners FIRING RATES. BS1D 16/19 52 kw BS2D 35/40 91 kw BS3D 65/ kw BS4D 110/ kw.
The Riello Gulliver BSD series of two stage gas burners, is a complete range of Low NOx emission products, developed to respond to any request for home heating, conforming to the most severe standards
More informationPRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS Reed Switches and Proximity Sensors 1 REED SWITCHES HIGH POWER 7 UNIVERSAL HIGH POWER & HIGH VOLTAGE 7 Form A Form C Form C Form A Form C 196W 134W 156W 634W 637W 907W 834W 933W
More informationTable Of Contents. Motor Selection Guide Installation Instructions Operators 20-32
Table Of Contents Motor Selection Guide 2-12 - Shades, Shutters and Doors - Retractable Awnings Installation Instructions 13-1 - Operator Adaptors - Operator Limit Adjustment - Wiring Considerations -
More informationCurtains. Motors & Accessories. Motor Selection Chart...2. Glydea 35 DCT & Glydea 35 WT Glydea 60e DCT & Glydea 60e WT RTS...
Curtains Motors & Accessories Motor Selection Chart...2 Glydea 5 DCT & Glydea 5 WT... Glydea 60e DCT & Glydea 60e WT... 4 Technical Characteristics & Features: Glydea 5 DCT & Glydea 5 WT... 56 Glydea 60e
More informationEasy. Easier. Mhouse.
Easy. Easier. Mhouse. The revolutionary system for automating your home in an incredibly quick and easy way 2006 Catalogue Mhouse Mhouse self fit Kit: everything s easy, everything s included! 2 Mhouse
More informationSectional Garage Doors Alutech Trend Series Price List
2017 Alutech Trend Series Price List 40mm Alutech trend series insulated sectional garage doors Avanti garage door openers and accessories Sectional Garage Doors High quality sectional garage doors designed
More informationDRUM MOTOR 113LP 113.5Ø 0.06kW kW, with planetary gearbox in polymer or polymer / steel combination for non-continuous operation
16 DRUM MOTOR UNIT HANDLING DRUM MOTOR 11LP 11.5Ø 0.06kW - 0.7kW, with planetary gearbox Product description This Pulley is the ideal operator for light and medium conveyors, for non-continuous use. Characteristics
More information500 Series. Databook. Sonesse ULTRA 50 AC and DC
500 Series Databook Sonesse ULTA 50 AC and DC Why Somfy? Somfy is the leading global manufacturer of strong, quiet, motors with electronic and app controls for interior and exterior window coverings. Over
More informationTools and ferrules. Contents. Tools and ferrules. Tools and ferrules J.1
Contents Cutting, stripping and crimping tools.2 Rechargeable and electric torque screwdriver.10 Screwdrivers.12 Wire end ferrules / Insulated cable lugs.21 Wire end ferrules with plastic collar.22 Twin-wire
More informationmechanics Features Technical specification Ordering information Dimensioned drawings Aluminium profiles made by isel
Panel profiles PP profiles For fast and easy erection of frames, benches and racks luminium, naturally anodised easy, very strong under load Top edge particularly suitable as a load-bearing cladding, also
More informationAIR-T AIR-T AIR-T AIR-T
Exhaust Fan Units INDEX PAG. HIGH HEAD ASPIRATORS WITH SIDE GROOVE TURBINE KW m 3 /h mm H O 3 NC /70 TRAILER-MOUNTED WITH CYLINDER Ø 300, 35 000 3 NC 5/30 " " " " ",5 00 " 5 N 5/30A " " " " ",5 00 500
More informationCVR-625. Compact Vibrating Rod Instruction Manual
CVR-625 Compact Vibrating Rod Instruction Manual BinMaster: Division of Garner Industries 7201 N. 98th St., Lincoln, NE 68507 402-434-9102 email: info@binmaster.com www.binmaster.com OPERATING INSTRUCTIONS
More informationKüba Green Line XXXXXXXXXX. Küba market plus SP. High Performance Unit Cooler.
Küba Green Line XXXXXXXXXX 35 High Performance Unit Cooler GEA Küba Application Benefits for Contractors and Operators Expanded capacity range Up to 52 kw Closer-spaced capacity steps Thanks to five different
More informationPracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht
prachteck Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht acht Pracht Pracht Pracht Pracht EDITION Pracht
More informationAzur SG2400. Mounting bar awning SG2400. Description. Options:
Azur Description One-piece, corrosion-resistant square mounting bar (35 x 35 mm) made of galvanised steel for erection of aluminium arm supports, brackets and roller tube. Brackets can be used for wall
More informationEnvironment-Sealed Basic Switches
HoneywellSensing and Control 1-800-537-6945 USA 1-815-235-6847International 1-416-293-8111Canada 13 Environment-Sealed Basic Switches GENERAL INFORMATION SE and XE switches are the smallest environment-sealed
More informationPERFORMANCE IP67 (IEC60529, JIS C 0920) Silver contact: Max.50 mω (6 to 8 Vdc, energizing current 1A, measured by voltage drop method) Gold alloy cros
Waterproof Vertical Type Limit Switches Model VCL-mm 2 sets of SPDT built-in switches enable use as a 2-point detection switch or multi-circuit control switch. On the 2-point detection (center-neutral)
More information212, 312 & 412 Vista Series Analog Panel Meter
C R LISTED File No. E471457 Analog Panel Meter Application The VISTA range of analog panel meters offers accurate measurement and indication of most electrical and electronic parameters in industry as
More informationOperating Instructions. VEGASWING 61, 63 with oscillator SW E60N (EX)
Operating Instructions VEGASWING 61, 63 with oscillator SW E60N (EX) Contents Contents Safety information... 2 Note Ex area... 2 1 Product description... 3 2 Function and application... 4 2.1 Principle
More informationSwitches- and Indicators
Switches- and Indicators Contents Description... 3 Product Assembly... 4 Mounting instruction... 6 Devices raised mounting... 7 Devices flush mounting... 17 Accessories... 22 Technical Data... 25 Typical
More informationMultiple Lever Types. Proximity Limit Switch. Circuitry. The Proximity Limit Switch utilises magnetic switching to sense and trigger off ferrous
Proximity Limit Switch The Proximity Limit Switch utilises magnetic switching to sense and trigger off ferrous metals. All components are sealed and protected within the rugged brass housing eliminating
More informationDOOR TECHNOLOGY. Standard electric strike series No. 5
DOOR TECHNOLOGY Standard electric strike series No. 5 Standard electric strike series No. 5 The range to meet all requirements Gretsch-Unitas Group With its forward-thinking innovations, the Gretsch-Unitas
More informationThe controllableollable Torque Limiting Clutch for
The controllableollable Torque Limiting Clutch for Filling Machinery Printing Machinery Packaging Machinery Conveyors and Materials Handling Equipment pneumatic or electromagnetic clutch Controllable during
More informationED SERIES SAFETY LIMIT SWITCH
Description The ED series safety limit switches conform to EN 547 and have been developed to provide a range of options including plastic cases in various sizes, a choice of snap acting, slow break/make
More informationTechnical data. Safety notes. Power consumption In operation At rest For wire sizing. 1.5 nominal torque 0.2 W 4 VA Auxiliary switch
echnical data sheet Damper actuator NM4A-S-P Damper actuator for operating air control dampers in ventilation and air-conditioning systems for building services installations For air control dampers up
More informationSECURELY HELD. OKW ACCESSORIES are designed to be practical, thus providing you with more flexibility for your individual case.
SECURELY HELD RATIONAL HINGE AND LOCKING TECHNIQUES For easy opening of the devices. THE PRODUCT WALL / RAIL OKW offers you a comprehensive range of. Adapted to the application, our standard cases can
More informationJewell 212, 312 and 412 VISTA Series Analog Panel Meter Series BEST IN CLASS
Application: The VISTA range of analog panel meters offers accurate measurement and indication of most electrical and electronic parameters in industry as per industrial standard case size. Available Models:
More informationCurrent consumption Auxiliary switch. Angle of rotation 90 (internal electrical stops) Running time
Technical data sheet Rotary actuator SY-4--T Rotary actuators for butterfly valves Torque 50 Nm Nominal voltage AC 4 V Control: Open-close or -point Auxiliary switch Technical data Electrical data Nominal
More informationDC/DC converters - MINI-PS DC/ 5-15DC/
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
More informationTechnical data. Safety notes. Power consumption In operation At rest For wire sizing. 1 nominal torque 0.2 W 2 VA Auxiliary switch
echnical data sheet Damper actuator LM4A-S-P Damper actuator for operating air control dampers in ventilation and air-conditioning systems for building services installations For air control dampers up
More informationCeiling lift Pro 250/300/350 No /-054/-055/-063/-064/-065
Ceiling lift Pro 120/165/210 No. 7465 000 050/-051/-052 Ceiling lift Pro 250/300/350 No. 7465 000 053/-054/-055/-063/-064/-065 Installation manual GB 01.2016 2 1. Safety instructions This unit can be operated
More informationa p prove d ELECTROMECHANICAL SLIDING GATE OPENER
EN 25 EN 25 ELETROMEHNIL SLIING GTE OPENER G The Junior gear box is built completely of die cast aluminium, and the coupling is supported by shielded roller bearings. ll of the internal operational components
More informationActuators for Fire Protection Dampers
4 620 OpenAir TM Actuators for Fire Protection Dampers GNA126.1E/T. GNA326.1E/T. Rotary version, 2-position control, with spring return and ready connected temperature monitoring unit, / DC 24 48 V / AC
More informationPALAZZO Royal The premier class
PLZZO Royal The premier class Point of use Fixations The PLZZO Royal is perfect for the restaurant industry and wins you over with its countless little details. It can either be opened and closed with
More informationgarage door operators
garage door operators Application area SOMMER garage door operators are suited for the following types of doors: sectional doors swing doors canopy doors (with special accessory) horizontal sectional doors
More informationPARTS LIST FOR MECCANO No. 10 vs No. 7 & "L" 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes a
PARTS LIST FOR MECCANO No. 10 vs No. 7 & "L" 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes 50 24 24 24 24 38 1a Perforated Strip 19 holes 12 6 6 6 6 16 1b Perforated
More informationH13.11 HANDLES H13 HORIZONTAL AND VERTICAL PIVOT WINDOWS
H13 HORIZONTL N VERTIL PIVOT WINOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - coercial@sobinco.com - www.sobinco.com ONTENTS 1. General information....03
More informationStandard Parts for Mould Making
Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves
More informationPressure Transmitters
Transmitters Wetted parts are all made of stainless steel for high resistance to chemicals Stainless steel diaphragm welded with casing No seals and thus low leakage rate even with difficult gases High
More informationRectangular profiles RE 40
8.3 luminium profiles Rectangular profiles Features Universal precision, clamping and machining surface s a stabiliser for machine and subframe constructions luminium, ly anodised Produced in accordance
More informationMaterial: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated
4-249 Hinge Pr01 180 Small elegant hinge. 180 Opening. Adjustments are possible with respective bores provided. The nut plate can be mounted in different ways, according to the application. zinc die, matt
More informationGEZE TS 4000 E Overhead door closer with electrohydraulic hold-open according to EN 1155, closing force size 1-6
Overhead door closer with electrohydraulic hold-open according to EN 1155, closing force size 1-6 Product features Closing force size EN 1-6 adjustable Closer in only one construction size Optical power
More informationMAIN PRICE LIST. - B 487 Perforated Strip 2 1/2" B 488 Perforated Strip 3 1/2" B 482 Perforated Strip 4 1/2" 9 1.
PERFORATED STRIPS LENGTH HOLES GBP 1 Perforated Strip 12 1/2" 25 1.63 1 a Perforated Strip 9 1/2" 19 1.51 1 b Perforated Strip 7 1/2" 15 1.39 2 Perforated Strip 5 1/2" 11 0.90 2 a Perforated Strip 4 1/2"
More informationENNACTO 200 to Single acting hydraulic actuators with gas cartridge (Nitrogen) ENNACTO 200 to 1600: scotch -yoke kinematic
Type series booklet ENNACTO 200 to 12500 8560.11/4--10 Single acting hydraulic actuators with gas cartridge () ENNACTO 200 to 1600: scotch -yoke kinematic ENNACTO 3200 to 12500: Rod and crank kinematic
More informationApprovals UL 508; CSA-C22.2 No ; IEC/EN ; CE marking
MainswitchRearmounting Partno. T0-2-1/V/SVB-SW Articleno. 045992 Front IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual override switches
More information