Automations for garage doors and rolling shutters

Transcription

1 Automations for garage doors and rolling shutters

2 Technology Versatility Low consumption BLINKO Flashing LED Technological solutions for safe operation All V2 operators for garage doors allow: - Precise and constant monitoring of the door position via encoder - Obstacle detection - Self-learning of opening and closing times. Versatility of the range V2 offers a complete range of automation for tilting and sectional garage doors up to 15m². Always precise and silent operation even in case of blackout using emergency batteries. V2 2

3 Particular regard to energy consumption V2 research is geared towards the development of systems that reduce consumption and the impact on the environment. With this objective, ECO-LOGIC has been created: a solar energy device to power the automation of the garage door without connections to the electricity network. SIRMO DIGIT Digital selector via radio or cable SENSIVA XS Miniature wall and column photocells V2 3

4 Simplicity, Speed, Safe

5 ty, Guarantee Automations for garage doors and rolling shutters Comfort and simplicity Aimed at technicians and installers, the V2AppTool is the app that allows you to program the parameters of the V2 control units via smartphones and tablets. The V2AppTool, available for Android and ios, requires only the installation of the BT-01 Bluetooth module. What can you do with the V2AppTool? You can set all the parameters of the control panel, load the default data, read the current configuration, or load a previously saved one. V2AppTool the future is now... The V2AppTool also allows you to access the event log, quickly update the firmware of the control unit and place the previously saved configurations in cloud. Speed = shorter waiting times Within the V2 range, there are models of fast actuators (highlighted by the abbreviation Fast ) that guarantee opening and closing with shorter waiting times. Operating safety V2 offers a wide range of accessories and safety devices for the protection of end users against the danger of crushing. Quality guarantee V2 products comply with the European Directives and the main internationally recognised standards. In the V2 laboratories, scrupulous tests are carried out on all products before being certified by qualified external bodies. V2 5

6 EXAMPLE SYSTEM MOTORS FOR GARAGE DOORS AND ROLLING SHUTTERS C C A D A D B E B E 2 2 C 1 C A D A D B B E E 2 2 COMPONENTS ADDITIONAL ACCESSORIES Motor Transmitter Chain guide Control unit Receiving module A B C D E Key switch Photocells Flashing light Digital radio switch Safety edges CABLE TO BE USED LENGTH OF THE CABLE < 10 metres from 10 to 20 metres from 20 to 30 metres Power supply (230V) 3G x 1.5 mm 2 3G x 1.5 mm 2 3G x 2.5 mm 2 Power supply (400V) 4G x 1.5 mm 2 4G x 1.5 mm 2 4G x 2.5 mm 2 Photocells (TX) 2 x 0.5 mm 2 2 x 0.5 mm 2 2 x 0.5 mm 2 Photocells (RX) 4 x 0.5 mm 2 4 x 0.5 mm 2 4 x 0.5 mm 2 Key switch 2 x 0.5 mm 2 2 x 0.5 mm 2 2 x 0.5 mm 2 Safety edges 2 x 0.5 mm 2 2 x 0.5 mm 2 2 x 0.5 mm 2 Flashing light 2 x 1.5 mm 2 2 x 1.5 mm 2 2 x 1.5 mm 2 Antenna (integrated into the flashing light) RG174 RG174 RG174 V2 6

7 INDEX OF PRODUCTS MOTORS FOR GARAGE DOORS AND ROLLING SHUTTERS Motors for RESIDENTIAL USE azimut azimut kit atris atris kit vega vega kit argo Motors for INDUSTRIAL USE fm60 V2 7

8 SELECTION GUIDE MOTORS FOR GARAGE DOORS AND ROLLING SHUTTERS sectional and balanced doors centre roof installation 24V RESIDENTIAL USE balanced doors centre door installation 230V shaft Ø 60/48/42 - crown 200/220 mm 230V balanced rolling shutters shaft Ø 101/76 - crown 240 mm 230V shaft Ø 101/76 - crown 240 mm 230V INDUSTRIAL USE industrial sectional doors shaft Ø 25,4 mm 230V 400V V2 8

9 doors up to 8 m 2 azimut doors up to 10 m 2 atris doors up to 15 m 2 atris doors up to 9 m 2 vega-c 230V doors up to 14 m 2 (2-motor installation combined with VEGA-C 230V) vega-230v rolling shutters up to 160 Kg without electro-brake with electro-brake argo 160 argo 160-FR rolling shutters up to 170 Kg without electro-brake with electro-brake argo 170 argo 170-FR rolling shutters up to 300 Kg without electro-brake with electro-brake argo 300 argo 300-FR industrial doors up to 20 m 2 fm60 m industrial doors up to 20 m 2 fm60 t V2 9

10 MOTORS FOR GARAGE DOORS AND ROLLING SHUTTERS azimut Galvanized steel guide with chain conveying system Built-in digital control unit 24V electromechanical irreversible actuator Built-in courtesy light for sectional and balanced doors up to 8 m 2 Maximum force 500 N (50 Kg) PLUS Accurate and safe operation with encoder Sound signalling during automatic closing External control keypad and led display for easy changing of the control unit functions 170 mm Silent operation: chain conveying system on galvanized steel rail 105 mm 310 mm TECHNICAL FEATURES Description 24V maximum force 500N MODEL AZIMUT CODE 25B005 Power supply (Vac - Hz) Maximum electric power (W) 100 Door area (m 2 ) < 8 Start force (N) 500 Nominal force (N) 350 Average speed (cm/s) 11 Lamp (W) 25 Working temperature ( C) Duty cycle (%) 30 Protection degree (IP) 20 Motor weight (Kg) 10 V2 10

11 azimut CONTROL UNIT Programming via 4 buttons and display Input for photocells Input for an external start button MHz built-in receiver allowing the use of Personal Pass series transmitters Possibility to store up to 15 transmitters Self-learning of times, slow-downs and forces both in opening and closing phase Amperometric sensor obstacle detection function with programmable threshold PRE-ASSEMBLED CHAIN GUIDE CODE LENGTH MAXIMUM DOOR HEIGHT Sectional or spring balanced door Counterweight balanced door m (2 x 1.5 m) 2240 mm 2450 mm m (2 x 1.65 m) 2540 mm 2800 mm m (2 x 1.8 m) 2840 mm 3100 mm m (1 x 3 m) 2240 mm 2450 mm ACCESSORIES Adaptor bracket for counterweight balanced doors Additonal fixing support External release kit with key V2 11

12 MOTORS FOR GARAGE DOORS AND ROLLING SHUTTERS azimut kit Installation kit for sectional and balanced doors up to 8 m 2 COMPOSITION 2 PRE-ASSEMBLED CHAIN GUIDE CODE LENGTH MAXIMUM DOOR HEIGHT Sectional or spring balanced door Counterweight balanced door m (2 x 1.65 m) 2540 mm 2800 mm m (1 x 3 m) 2240 mm 2450 mm 1 3 PHOX2 Electromechanical irreversible actuator MHz rolling code transmitter ASSEMBLY DIAGRAM To complete the installation with other additional accessories refer to the example system at the beginning of the section V2 12

13 azimut kit TECHNICAL FEATURES Description 24V maximum force 500N MODEL AZIMUT CODE 25B005 Power supply (Vac - Hz) Maximum electric power (W) 100 Door area (m 2 ) < 8 Start force (N) 500 Nominal force (N) 350 Average speed (cm/s) 11 Lamp (W) 25 Working temperature ( C) Duty cycle (%) 30 Protection degree (IP) 20 Motor weight (Kg) 10 azimut kit Selection guide Kit MODEL (2 x 1.65 m) (1 x 3 m) PHOX2 Kit CODE 6 Kit AZIMUT 1 32B011 24V Kit AZIMUT 2 32B012 V2 13

14 V2 domotics x love MOTORS FOR GARAGE DOORS AND ROLLING SHUTTERS atris 24V electromechanical irreversible actuator Galvanized steel guide Built-in digital control unit Built-in LED courtesy light for sectional and balanced doors up to 15 m2 Maximum force 1000 N (100 Kg) Available in two versions: 700 N and 1000 N 113 mm PLUS Accurate and safe operation with encoder Sound signalling during automatic closing Control panel with keypad and LCD display Compartment of connections protected by a lid 218 mm Integrated LED courtesy light (400 lm), expandable to 1200 lm with the accessory modules Minimum consumption in stand-by (<0.5 Wh) Operation in case of absence of power using the B-PACK backup battery Operation with solar power using the ECO-LOGIC system 374 mm TECHNICAL FEATURES Description MODEL 24V maximum force 700N 24V maximum force 1000N 24V forza massima 1000N (fast motor) ATRIS-700 ATRIS-1000 ATRIS-1000-F CODE 25C015 25C016 25C021 Power supply (Vac - Hz) Maximum electric power (W) Consumption in stand-by (Wh) < 0,5 < 0,5 < 0,5 Door area (m2) < 10 < 15 < 14 Start force (N) Nominal force (N) Maximum speed (cm/s) Duty cycle (%) Protection degree (IP) Motor weight (Kg) Working temperature ( C) V2 14

15 atris CONTROL UNIT Programming via 4 buttons and display Quick menu for easy programming of the device Plug-in adaptor for modular radio receiver MR2 Input for photocells or safety edges Input for an external start button Input for an external stop button Output for flashing light 24V with intermittence Self-learning of times, slow-downs and forces both in opening and closing phase Obstacle detection function ADI connector for connecting optional modules PRE-ASSEMBLED GUIDE CODE TYPE LENGTH MAXIMUM DOOR HEIGHT Sectional or spring balanced door chain 3 m (1 x 3 m) 2200 mm 2500 mm chain 3.3 m (1 x 3.3 m) 2500 mm 2800 mm chain 3.3 m (2 x 1.65 m) 2500 mm 2800 mm chain 3.8 m (1 x 3.8 m) 3000 mm 3300 mm belt 3.3 m (1 x 3.3 m) 2500 mm 2800 mm belt 3.3 m (2 x 1,65 m) 2500 mm 2800 mm belt 3.8 m (1 x 3,8 m) 3000 mm 3300 mm Counterweight balanced door ACCESSORIES 11B047 MR MHz plug-in receiver module Also available in MHz version (code 11B048) BT LUX L400 ADI module for managing the control unit via Bluetooth and V2app ADI module for the management of lights, traffic light or electro-brake Light module of 400 lm B-PACK Backup battery with built-in charger Adaptor bracket for counterweight balanced doors External release kit with key V2 15

16 MOTORS FOR GARAGE DOORS AND ROLLING SHUTTERS atris kit Installation kit for sectional and balanced doors up to 15 m 2 COMPOSITION 2 PHOX2 3 MR MHz rolling code transmitter Plug-in module receiver 1 Electromechanical irreversible actuator ASSEMBLY DIAGRAM To complete the installation with other additional accessories refer to the example system at the beginning of the section V2 16

17 atris kit TECHNICAL FEATURES Description 24V maximum force 700N 24V maximum force 1000N MODEL ATRIS-700 ATRIS-1000 CODE 25C015 25C016 Power supply (Vac - Hz) Maximum electric power (W) Consumption in stand-by (Wh) < 0,5 < 0,5 Door area (m 2 ) < 10 < 15 Start force (N) Nominal force (N) Maximum speed (cm/s) Working temperature ( C) Duty cycle (%) Protection degree (IP) Motor weight (Kg) atris kit Selection guide Kit MODEL 6 PHOX2 MR2 Kit CODE 6 Kit ATRIS B042 Kit ATRIS B043 24V Kit ATRIS B044 Kit ATRIS B045 V2 17

18 MOTORS FOR GARAGE DOORS AND ROLLING SHUTTERS vega Starting button 230V electromechanical irreversible actuator for balanced doors up to 9 m 2 Easy-to-access release lever PLUS 186 mm 145 mm Compact form and strong mechanics to guarantee optimal performance with all types of balanced doors Obstacle detection Self-learning of opening and closing times Built-in courtesy light Adjustable cams to be set as a limit switch or slowing down start 640 mm TECHNICAL FEATURES Description 230V digital control unit 230V without control unit MODEL VEGA-C 230V VEGA-230V CODE 24A005 24A002 Power supply (Vac - Hz) Door area (m 2 ) 9 14* Full load current (A) Maximum electric power (W) Nominal speed of the motor (Rpm) Capacitor (μf) 8 8 Working temperature ( C) Duty cycle (%) Protection degree (IP) Motor weight (Kg) 9 9 Maximum accessory load 24V (W) 3 - * Installation with 2 motors in combination with VEGA-C 230V ** Installation with 2 motors connected by the accessory cable V2 18

19 vega CONTROL UNIT Programming achieved using 3 program buttons and display Plug-in adaptor for modular radio receiver MR2 1 photocell input with self-test function 1 input for mechanical or resistive sensitive safety edges Output for 24V flashing light or warning light Courtesy light output Self-learning opening time and obstacle detection function Operational cycle counter, with programmable maintenance reminders Slowing down in the limit switch area Soft start during the opening phase (programmable time) ACCESSORIES Straight telescopic arm with iron rod Curved telescopic arm Straight telescopic arm with sleeve Pair of curved telescopic arms with sleeve Pair of curved telescopic arms with iron rod Pair of transmission shafts with sleeves, 1.5 m in length Pair of transmission shafts with sleeves, 2 m in length Pair of sleeves Kit for anchoring to the structure Pair of tube guide brackets with bushes 1.2 m long anchoring backstay 1.8 m long anchoring backstay External release kit with metal wire 11B047 MR MHz plug-in receiver module Also available in MHz version (code 11B048) V2 19

20 MOTORS FOR GARAGE DOORS AND ROLLING SHUTTERS vega kit Installation kit for balanced garage doors up to 9 m 2 COMPOSITION 2 PHOX MHz rolling code transmitter 3 MR2 Plug-in module receiver Pair of curved telescopic arms with iron rod Pair of transmission shafts with sleeves, 2 m in length 1 230V electromechanical irreversible actuator m long anchoring backstay Kit for anchoring to the structure Pair of tube guide brackets with bushes ASSEMBLY DIAGRAM 1 2 To complete the installation with other additional accessories refer to the example system at the beginning of the section V2 20

21 vega kit TECHNICAL FEATURES Description 230V digital control unit MODEL VEGA-C 230V CODE 24A005 Power supply (Vac - Hz) Door area (m 2 ) 9 Full load current (A) 2.5 Maximum electric power (W) 575 Nominal speed of the motor (Rpm) 1.6 Capacitor (μf) 8 Working temperature ( C) Duty cycle (%) 30 Protection degree (IP) 20 Motor weight (Kg) 9 Maximum accessory load 24V (W) 3 vega kit Selection guide Kit MODEL 6 VEGA-C 230V PHOX2 MR Kit CODE 6 Kit VEGA 1 32C007 Kit VEGA 2 32C002 V2 21

22 MOTORS FOR GARAGE DOORS AND ROLLING SHUTTERS argo 230V irreversible electromechanical actuator for shutters weighing 160 to 300 Kg Available in two versions with or without electro-brake PLUS argo 160 argo Wires protected by special plastic container 315 External limit switch unit easily accessible Pre-wired condenser Simple, intuitive limit switch adjustment Special models with built-in electro-brake argo TECHNICAL FEATURES Description 160 Kg 160 Kg electro-brake 170 Kg 170 Kg electro-brake 300 Kg 300 Kg electro-brake MODEL ARGO 160 ARGO 160 FR ARGO 170 ARGO 170 FR ARGO 300 ARGO 300 FR CODE 26A017 26A018 26B020 26B021 26B022 26B023 Power supply (Vac - Hz) Absorbed current (A) x x 2.5 Maximum electric power (W) x x 700 Lifting power (Kg) Torque (Nm) Motor crown speed (rpm) Rolling shutter shaft Ø (B) (mm) 60/48 60/48 101/76 101/76 101/76 101/76 Motor crown Ø (A) (mm) 200/ / Motor weight (Kg) Shutter maximum height (m) Working temperature ( C) V2 22

23 V2 domotics x love argo CONTROL UNITS TO BE USED EASY-TOP EASY-BASIC Digital control unit for 230V motors Analogue control unit for 230V motors ACCESSORIES A012 Wall-mounting aluminium key switch with lock, push-button and lever for electro-brake release Recessed installation aluminium key switch with lock, push-button and electro-brake release Wall-mounted aluminium key switch Electro-brake Shaft adapter Ø 42 (only for ARGO 160) V2 23

24 MOTORS FOR GARAGE DOORS AND ROLLING SHUTTERS fm60 Electromechanic gearmotor for industrial sectional doors up to 20 m 2 Available in two versions 230V and 400V Ideal for shafts with Ø 25.4 mm Strong painted aluminium casing PLUS Easy installation: to be directly installed on sectional door frame with reduced overall dimensions to make installation easier in any position 55 Easy to use: thanks to the chain for door manual activation in case of black-out Reliable and precise: micrometric adjustment of opening and closing limit stops Aluminium reducer with oil-bath lubricated gears (bronze wheel) Motor in aluminium with cooling fins TECHNICAL FEATURES Description 230V for sectional doors up to 20 m 2 400V for sectional doors up to 20 m 2 MODEL FM60M FM60T CODE 25C018 25C019 Power supply (Vac - Hz) Door area (m 2 ) < 20 < 20 Absorbed power (W) Torque (Nm) Shaft diameter (mm) 25,4 25,4 Average speed (rpm) Duty cycle (%) 20% 20% Working temperature ( C) Protection degree (IP) V2 24

25 fm60 CONTROL UNITS TO BE USED CITY4-EVO Digital control unit for 230V motors HEAVY2 Digital control unit for THREEPHASE 400V motors ACCESSORIES push button keypad V2 25

26 ICONS Control unit power supply voltage Motor power supply Built-in receiver Connector for modular receiver Output for flashing light without intermittence Output for flashing light with intermittence Interface for connecting ADI modules Control unit suitable for operation with the backup battery module Compatible with the ECO-LOGIC system Control unit designed for connection to Bluetooth module and control via V2app V2 26

27

28 -