ELEKTROMATEN SI Rapid Safedrive. Emergency manual operation. Door controls. Limit switches. Mounting. Special versions. Series SG63F SI 17.

Size: px
Start display at page:

Download "ELEKTROMATEN SI Rapid Safedrive. Emergency manual operation. Door controls. Limit switches. Mounting. Special versions. Series SG63F SI 17."

Transcription

1 SI Rapid Safedrive For driving: High-speed sectional doors and high-speed rolling doors which require an anti-fallback device Series SG6F SI 7. Series SI 5. - SI 0. SI SI 8.6 Series SG5F SI SI 00. Rapid Safedrive FI SI are special drives for industrial doors which require an anti-fallback device. The patented safety brake is built into the gear. The drive unit is fitted directly to the door shaft. Safedrive comprises of: Worm gear with safety brake and hollow shaft, emergency manual operator, integrated limit switches and electrical motor. SG6F Patented built-in safety brake Safety against failure of worm or wheel Independent of speed / direction Maintenance free, self-monitoring Excellent damping characteristics in operation Approvals and certificates Type test according to: DIN EN 5 DIN EN 605- DIN EN TÜV NORD CERT GmbH Built-in safety brake Certificate of conformity according to: DIN EN 60 / 605 TÜV SÜD Industrieservice GmbH SG5F Emergency manual operation Hand crank NHK Hand chain operator KNH Limit switches Mechanical limit NES operating, emergency- and auxiliary limit switches Digital limit DES Absolute encoder, after a power failure, re-adjustment is not required Mounting Floating foot (standard fitting) Torque mount Special versions Increase of movements per hour Higher protection class Other voltages and frequencies Explosion-proof according to ATEX (page 6.0) SI with built-on frequency inverter (page.0) Door controls Simple connection to the limit switch by means of non-interchangeable plug connections allowing simple exchange with other GfA door controls Control voltage: V Frequency: 50 / 60 Hz Mains supply: N~0V, ~0V, N~00V, ~00V Details of all GfA door controls can be found in Section 8. Subject to alterations. (_Fd).07

2 . Technical data. Rapid Safedrive Output speed up to 5 Series SI 7. SG6F SI 5. SI 5.5 SI 5.0 Output torque Output speed Output shaft / hollow shaft (Ø) Locking torque Safety brake (approval number) Max. output speed OPEN / CLOSE for frequency inverter operation Motor power Supply voltage Operating frequency Operating current Max. movements per hour Supply side wiring / fusing (delayed action) Limit switch range 5 Max. hand force NHK / KNH 6 Weight Spare parts: Catalogue page Part no. installation drawing (dxf, dwg) Part no. Fußnoten unter. mm kw V Hz A N kg / 5, / 0 /,75 / 0 0 /,75 0 /, / 0 / / 60 / 60 5 / 5 0,0 0,85 0,85,0 ~0 / 00V ~0 / 00V ~0 / 00V ~0 / 00V , /,9, /,6, /,6 5, /, (60, 0) 0 (60, 0) 0 (60, 0) 99 / 0 90 / 9 08 / 0 8 / (Ø5) 0005 (Ø5,) (Ø0) (Ø,75) (Ø0) (Ø0) (Ø,75) (Ø0) (Ø,75) Series SI 0. SI 60. SG5F SI 75. SG5F SI 00. SG5F Output torque Output speed Output shaft / hollow shaft (Ø) Locking torque Safety brake (approval number) Max. output speed OPEN / CLOSE for frequency inverter operation Motor power Supply voltage Operating frequency Operating current Max. movements per hour Supply side wiring / fusing (delayed action) Limit switch range 5 Max. hand force NHK / KNH 6 Weight Spare parts: Catalogue page Part no. installation drawing (dxf, dwg) Part no. Footnotes under. mm kw V Hz A N kg / 06 / 06 / 06 / / / /,0,50,00,00 ~0 / 00V ~0 / 00V ~0 / 00V ~0 / 00V , /,0 6,7 /,9 8, /,7,9 / 6, x,5² / 5x,5² / 0 (60, 0) 0 (60, 0) 0 (60, 0) 0 (60, 0) 55 / 6 9 / / 06 / Subject to alterations. (_Fd)

3 . Rapid Safedrive Output speed from 6 Series SI 0.70 SI.70 SI 0.90 SI 5.60 SI 8.6 Output torque Output speed Output shaft / hollow shaft (Ø) Locking torque Safety brake (approval number) Max. output speed OPEN / CLOSE for frequency inverter operation Motor power Supply voltage Operating frequency Operating current Max. movements per hour Supply side wiring / fusing (delayed action) Limit switch range 5 Max. hand force NHK / KNH 6 Weight Spare parts: Catalogue page Part no. installation drawing (dxf, dwg) Part no. mm kw V Hz A N kg / 0 0 / 0 0 / / 90 / / 90 0 / / 80 0,0,0,80,80,0 ~0 / 00V ~0 / 00V ~0 / 00V ~0 / 00V ~0 / 00V , /,8 5,0 /,9 6, /,8 6, /,8 5, /, (0) 0 (0) 0 (0) 0 (0) 0 (0) 58 / 75 7 / 7 0 / / 99 5 / (9.057) (9.057) (9.057) (9.057) (9.057) (Ø0) (Ø0) (Ø0) (Ø0) (Ø0) (Ø0) Generally applies: Protection class IP5, permissible temperature range -0 C...+0 C (+60 C), operating sound pressure level SPL 70 db(a) See.5 We recommend the selection of a special GfA -FI for use with frequency inverter, OPEN drive speed at 87 Hz, see.7 The max. current in door drives can reach up to x the rated operating current for limited periods, see.6 and.7 When using a temperature range of +0 C C use half of maximum movements per hour, see also. 5 Maximum revolutions of hollow shaft 6 See. 7 List of spare parts does not apply to motor and gear, we can draw up article- and / or model-specific lists of spare parts on request. Selection chart. Roller shutters Tube EN 00 [mm] SI 7. SI 0.90 SI 5. SI 5.5 SI 5.60 SI 8.6 0,6 x,6 7 5, 6 57, 89 9,6 89, 89 8, 68 9, 08,0 x,6 5 6, , 5 0, 5,5 5 0, 500 0,8,0 x, , 09 7, 6,0 6 8,0 6 8, 98 6,9 59,0 x,5 50, , 5, 5,8 5 56, 50, 77,8 x 5,0 75,9 68 9, 0 5,5 0 6, 0 6, 65 7,6 9,7 x 5, ,8 87 9, 87 67, 096 5,5. Roller shutters Tube EN 00 [mm] SI 5.0 SI 0. SI 60. SI 75. SI ,0 x,6 75 0, , ,0 x,0 660,0 8 9, ,0 x,5 8 8, 575,5 56,5 670, ,8 x 5,0 8, 6,9 85,9 6067,9 8089,9 9,7 x 5, 60, ,9 9 6, , ,9 9, x 5, ,0 05 0, , ,0,5 x 6, , 57, 609, 7,0 x 6, , ,8 56 6,8 98,5 x 7, ,0 50 0,0,9 x 7, , F = Lift [N] v a = Initial speed Includes 0% friction for single-wall profiles (profile thickness 0mm) Read note in. Subject to alterations. (_Fd).07

4 . Sectional doors Cable drum [mm] SI 7. F [N] v SI 0.90 F [N] v SI 5. F [N] v SI 5.5 F [N] v SI 5.60 F [N] v SI 8.6 F [N] v Ø , 50 75, 8 0, 8 9, 8 9, 50 8,5 Ø , 800 5, 50 5, 50 6,7 50 6,7 50 8,. Sectional doors Cable drum [mm]] SI 5.0 F [N] v SI 0. F [N] v SI 60. F [N] v SI 75. F [N] v SI 00. F [N] v Ø , 500 0, Ø 00 50, 600 5, 500 5, , , F = Lift [N] v = Door speed Includes 0% friction Read notes in. and.8. Notes. European directive In accordance with the product standard EN - Doors- and EN 5 Safety in use of power operated doors-requirements.. Selection chart / Movements per hour Reduce weight of the door if the stated number of movements per hour is exceeded (See item -. Technical data) e.g. high frequently used doors (enquire). The selection chart includes 0% friction for roller shutters with single-wall profiles (profile thickness 0mm) and 0% friction for sectional doors. Reduce the weight by a further 0% for vertical lifted doors and insulated shutters with double walled, thick and / or deep sections. Do not calculate using the tube diameter. The highest torque will occur normally after - turns of the barrel from close.. Gear self-braking / Brake Drives without an electric brake have a self-sustaining worm gear and stop automatically. On drives with an electric brake, stopping is achieved by the external brake. Brake inspection must always be carried out by qualified service engineers.. Manual operation In accordance with EN 5 and 60 hand force up to 90 N is permissible. For large, heavy doors, manual operation is only used for closing the door. In the case of drive units with an electric brake; emergency manual operation is carried out against the closed brake (Read note in.)..6 Motor overload protection Motor overload protection must be able to withstand x the operating motor current because the starting current of the drive unit can reach these levels for short periods..7 Use with external frequency inverter We recommend FI with an integrated frequency inverter (page.0). For external frequency inverters applies: A higher than recommended drive speed puts extra load onto the gear. This extra load must be taken into account when sizing a drive by reducing the available output torque. Increasing the drive speed by 0% reduces the admissible drive torque by 5%. In the case of higher drive speeds reduce the drive torque accordingly (enquire if necessary). The admissible drive speeds may not be exceeded (See item -. Technical data). The operating forces must comply with EN 5, and the corresponding EMC directives must likewise be observed. If selecting a frequency inverter, note that the starting current of the drive unit can reach x the operating motor current..8 Cable / Cable drums When calculating the cable size the max. permitted door weight is required with a safety of 6x for the cables requirement of EN 60. Cable drum selection ensure that two turns of the cable remain on the drum at all times. The diameter of the cable drum must be at least 0x the diameter of the cable..5 Locking torque / Holding torque The permissible loads on walls, fastenings, mountings and transmission elements must not be exceeded, even for maximum holding torques or locking torques..07 Subject to alterations. (_Fd)

5 . Dimensions. SI 7. SG6F 7 5 Worm gear with safety brake Motor Limit switch Optional: WS 900 control panel, removable, with 0,8m cable 5 Hand crank NHK 6 Floating foot 7 Brake 6 Ø D H B 5 8, 8 5, 8, 6,5 0, 8,75,7 6,5 0, Permitted installation: horizontal (as shown) or vertical (motor at the bottom). SI 5. SI 0. / SI 0.70 SI L Worm gear with safety brake Motor Limit switch Optional: WS 900 control panel, removable, with 0,8m cable 5 Hand crank NHK 6 Floating foot 7 Brake Ø D H B 0, 8,75,7 6,5 0, SI SI SI SI SI SI SI SI SI Permitted installation: horizontal (as shown) or vertical (motor at the bottom) Subject to alterations. (_Fd).075

6 . SI 60. SI 00. SG5F Worm gear with safety brake Motor Limit switch Optional: WS 900 control panel, removable, with 0,8m cable 5 Hand crank NHK 6 Floating foot 7 Brake 8 Intermediate gear (not shown) L L L SI SI SI Permitted installation: horizontal (as shown), vertical (motor at the bottom) only with torque mount (page.077 item 6.) 5. Emergency manual operation for horizontal or vertical installation Manual hand crank operation NHK (Standard) Manual hand crank operation with knuckle joint NHKK Hand chain operator KNH For series Part no. L H SG6F / SG5F SG6F / Manual forces, see item of technical data Read note in..076 Subject to alterations. (_Fd)

7 6. Attachments / Accessories 6. Bracket For series SG6F / SG5F Part no. Max. load kn kn 6. Torque mount - or left-hand use vertical (as shown) or horizontal For series Ø D Part no. L L L L L5 SG6F , SG6F / , , SG5F , For mounting with floating foot (additional requirements: bracket 6. and bearing) 6. Cable drum D D B D L Cable drum-ø 60 mm For tube-ø mm for Cable -Ø Useful cable length SI 7. / SI 5. / SI mm 9 m SI 5.0 / SI 0. / SI mm 6,5 m Lead Part no Permitted cable force D D D L 800 N N Cable-drum-Ø 00 mm For tube-ø 59 mm for Cable -Ø Useful cable length SI 5.0 / SI 0. 6 mm 7 m SI 5.0 / SI 0. / SI mm,5 m SI 75. / SI mm 0 m Lead Part no Permitted cable force D D D L 880 N N N 600 N Read note in.8 In case of B 6 mm Subject to alterations. (_Fd).077

ELEKTROMATEN SI FI Safedrive with built-on frequency inverter

ELEKTROMATEN SI FI Safedrive with built-on frequency inverter SI FI Safedrive with built-on frequency inverter For driving: High-speed sectional doors and high-speed rolling doors which require an anti-fallback device Series SGF SI,.0 FI - SI.0 FI Series SG8F SI

More information

ELEKTROMATEN SE Sectional-door-drive. Emergency manual operation. Special versions. Limit switches. Door controls. Mounting

ELEKTROMATEN SE Sectional-door-drive. Emergency manual operation. Special versions. Limit switches. Door controls. Mounting SE Sectional-door-drive For driving: Counterbalanced sectional doors Series KG0 SE. / SE. WS Series / E SE 9. -. SE. DU SE.80 FI / SE.80 FI SE are special drives for counterbalanced sectional doors. The

More information

ELEKTROMATEN ST Sliding-door-drive

ELEKTROMATEN ST Sliding-door-drive ST Sliding-door-drive for sliding doors ST 9.5 ST 80. Output torque: 90-800 Nm Output speed: 5 - rpm Control panels for ST WS 905 / TS 00.0.0 Subject to alterations. (_Db).000 ST Sliding-door-drive For

More information

Mechanical Operating Instructions

Mechanical Operating Instructions Mechanical Operating Instructions SE 5.24 WS / SE 5.24 51172095 / 04.2006 Bau muster Zertifizierung geprüft EN 13241-1 OPERATING INSTRUCTIONS 52210111 consisting of: M : Mechanical Operating Instructions

More information

Mechanical operating instructions

Mechanical operating instructions en Mechanical operating instructions Safedrive - ELEKTROMATEN SI / SIK 51172028 - i 09.2011 OPERATING INSTRUCTIONS 52210113 consisting of: M : Mechanical operating instructions E : Electrical operating

More information

Operating Instructions for Roll-Up Door Operators / MDF

Operating Instructions for Roll-Up Door Operators / MDF Operating Instructions for Roll-Up Door Operators / MDF GB Roll-Up Door Operator / MDF / Rev. 0.0 1 1. Contents 3. General safety instructions 1. Contents 2 2. Key to symbols 2 3. General safety instructions

More information

Installation Instructions

Installation Instructions Installation Instructions ELEKTROMAT SE 15.48-25,40 NOT DEFINED Model: 10004112 10006 -en- Status: 21.07.2016 2 GfA ELEKTROMATEN UK Ltd Titan Business Centre Spartan Close Warwick CV34 6RR United Kingdom

More information

Operating instructions

Operating instructions Pos: 1.1 /BA_Module/BA_AA Deckblatt/BAAA000001_M001 @ 0\mod_1190623555800_6.doc @ 448 Pos: 1.2 /BA_Module/BA_Seitenumbruch @ 0\mod_1190719383361_0.doc @ 548 en Operating instructions Safety brake FG 220-60

More information

Lexium integrated drives

Lexium integrated drives Description ILp for DeviceNet, EtherCAT, Modbus TCP, ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for DeviceNet, EtherCAT, Modbus TCP or and a brushless

More information

Lexium integrated drives

Lexium integrated drives Description ILp for CANopen, PROFIBUS DP, RS ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for CANopen DS, PROFIBUS DP or RS and a brushless DC motor.

More information

Assembly and Operating Instructions

Assembly and Operating Instructions A35AE FU...A150AE FU en Assembly and Operating Instructions Plug-in drives Important information for: Fitters / Electricians / Users Please forward accordingly! These instructions must be kept safe for

More information

Helical Gear Motors BEGE Type G & M. Your drive, our (trans)mission. BEGE Power Transmission

Helical Gear Motors BEGE Type G & M. Your drive, our (trans)mission. BEGE Power Transmission Helical Gear Motors BEGE Type G & M BEGE Power Transmission Anton Philipsweg 30 2171 KX Sassenheim The Netherlands T: +31 252-220 220 E: bege@bege.nl W: www.bege.nl Your drive, our (trans)mission General

More information

Shaft mounted rolling door drives DFM/DFE 100, 170, 250, 350, 500 and 750 WFM/WFE 170

Shaft mounted rolling door drives DFM/DFE 100, 170, 250, 350, 500 and 750 WFM/WFE 170 Shaft mounted rolling door drives DFM/DFE 100, 170, 250, 350, 500 and 750 WFM/WFE 170 Assembly instructions (translation) DIN EN ISO 9001: 2008 Certificate 01 100 070016/03 For the safety of persons it

More information

Rolling door drives and controls robust and safe

Rolling door drives and controls robust and safe Rolling door drives and controls robust and safe A lot of advantages The robust elero door drives are available in different versions. Combined with equal controls they offer a solution for almost every

More information

Lenze ATEX-compliant gearboxes Gearboxes for use in potentially explosive atmospheres

Lenze ATEX-compliant gearboxes Gearboxes for use in potentially explosive atmospheres Lenze ATEX-compliant gearboxes Gearboxes for use in potentially explosive atmospheres ATEX for drive technology The ATEX directive, which has been in force since July 1, 2003, has been introduced in an

More information

Instruction Manual. Sewage lifting station compli 300

Instruction Manual. Sewage lifting station compli 300 Instruction Manual Sewage lifting station compli 300 Safety instructions Areas of application Electrical connection Installation Servicing Technical data Appendix JUNG PUMPEN GmbH Industriestr. 4-6 33803

More information

C-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS

C-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence: about

More information

Flow limiter SP/SMB13 for line installation in circulating-oil lubrication systems.

Flow limiter SP/SMB13 for line installation in circulating-oil lubrication systems. 1-3004-EN Flow limiter SP/SMB13 for line installation in circulating-oil lubrication systems. Flow limiters are used in circulating-oil lubrication systems. The task of a flow limiter is to divide up the

More information

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics /2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx

More information

SITRANS P measuring instruments for pressure

SITRANS P measuring instruments for pressure Overview Application The pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials guarantees compliance with

More information

Lenze. Drives with worm gearboxes 52.

Lenze. Drives with worm gearboxes 52. 6 887 Lenze Drives with worm gearboxes 5. Lenze Drive Systems GmbH, Postfach 0 5, D-76 Hameln, Site: Groß Berkel, Hans-Lenze-Straße, D-855 Aerzen, Phone ++9 (0) 55 8-0, Telefax ++9 (0) 55 8- E-Mail: Lenze@Lenze.de

More information

DATAFLEX 42/1000 Torque Measuring Shaft Operating/Assembly instructions DATAFLEX

DATAFLEX 42/1000 Torque Measuring Shaft Operating/Assembly instructions DATAFLEX DATAFLEX 4/1000 1 of 1 DATAFLEX Torque measuring shaft type 4/1000 Drawn: 017-01-0 Shg/Koe Replaced for: dated 015-04-13 Verified: 017-01-0 Shg Replaced by: DATAFLEX 4/1000 of 1 DATAFLEX is a maintenance-free

More information

Some customers opt to manually power their actuators. In those cases hand wheels are usually the preferred drive component.

Some customers opt to manually power their actuators. In those cases hand wheels are usually the preferred drive component. EXTERNAL POWER SOURCE AND GEAR REDUCER All actuators require an external power source. Whether this power source be an electric motor or hand wheel Duff-Norton has the required component. Customers who

More information

Actuators for air dampers and control valves of oil burners

Actuators for air dampers and control valves of oil burners 7 812 Actuators for air dampers and control valves of oil burners SQM1... SQM2... Reversible electromotoric actuators Torques: - SQM1... up to 10 Nm - SQM2... up to 20 Nm Running times: - SQM1... 14...100

More information

AE 9... AE 40 Contactors NE... Contactor Relays

AE 9... AE 40 Contactors NE... Contactor Relays Technical data AE 9... AE 0 Contactors NE... Contactor Relays AE 9... AE 0 Contactors NE.. Contactor Relays Contents AE 9... AE 0 Contactors Description... 2 Ordering Details... 3 Technical Data... Terminal

More information

Operating Instructions

Operating Instructions Operating Instructions Ex UPS Combination of > 8265/5 GUBox control panel > 8316 battery box Contents 1 Contents 1 Contents 2 2 General Information 2 3 Safety Instructions 2 4 Conformity to standards 3

More information

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics /-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx

More information

DATAFLEX 110/... Torque Measuring Shaft Operating/Assembly instructions DATAFLEX. Torque measuring shaft type 110/

DATAFLEX 110/... Torque Measuring Shaft Operating/Assembly instructions DATAFLEX. Torque measuring shaft type 110/ DATAFLEX 0/... of 22 DATAFLEX Torque measuring shaft type 0/ DATAFLEX 0/... 2 of 22 DATAFLEX is a maintenance-free torque measuring shaft with integrated speed measurement. Combined with the steel lamina

More information

Threaded Resistance Thermometers Model TR10-C, with Fabricated Thermowell Model TW35

Threaded Resistance Thermometers Model TR10-C, with Fabricated Thermowell Model TW35 Electrical Temperature Measurement Threaded Resistance Thermometers Model TR10-C, with Fabricated Thermowell Model TW35 WIKA Data Sheet TE 60.03 Applications Machinery, plant and tank construction Energy

More information

Safety Switches Series 8537

Safety Switches Series 8537 Safety Switches www.stahl.de > 3- and 6-pole switches 12 / 16, 25, 40, 63 / 80, 125 / 160, 250, 315, 400, 500 A > Motor switching capacity AC-3 and AC-23 acc. to IEC 60947-3, EN 60947, DIN VDE 0660 part

More information

(fairleaders) BALANCED HEAD FAIRLEADS DECK MOUNTED DOUBLE SHEAVE SHEAVE FAIRLEADS TYPE CFF BALANCED HEAD FAIRLEADS

(fairleaders) BALANCED HEAD FAIRLEADS DECK MOUNTED DOUBLE SHEAVE SHEAVE FAIRLEADS TYPE CFF BALANCED HEAD FAIRLEADS FAIRLEADS 4.2.2. SHEAVE FAIRLEADS Pagina 1. (fairleaders) 2.2.1. BALANCED HEAD FAIRLEADS 2.2.2. DECK MOUNTED DOUBLE SHEAVE 2.2.3. SHEAVE FAIRLEADS TYPE CFF 2.2.4. BALANCED HEAD FAIRLEADS FAIRLEADS 4.2.2.

More information

Technical description... 1 Limit switch versions MR 6 Power tables... 6 Dimensions... 7 Spare part lists... 8

Technical description... 1 Limit switch versions MR 6 Power tables... 6 Dimensions... 7 Spare part lists... 8 Index Technical description... 1 Limit switch versions... 3 MR 6 Power tables... 6 Dimensions... 7 Spare part lists... 8 MS 12 Power tables... 10 Dimensions... 11 Spare part lists... 13 MR 30 Power tables...

More information

Magnetic Field Sensor for pneumatic cylinders BIM-UNT-AP6X-0.3-PSG3S/3GD

Magnetic Field Sensor for pneumatic cylinders BIM-UNT-AP6X-0.3-PSG3S/3GD ATEX category II 3 G, Ex zone 2 ATEX category II 3 D, Ex zone 22 For T-groove cylinders without mounting accessories Optional accessories for mounting on other cylindrical housings. One-hand mounting possible

More information

Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518

Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518 3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions

More information

Control panel. For 3 three-phase electric pumps with thermal protection and exchanger

Control panel. For 3 three-phase electric pumps with thermal protection and exchanger AUTOCLAVES PRODUCTS Control panel For 3 three-phase electric pumps with thermal protection and exchanger General features: Electromechanic panel with electronic control Sequence exchanger for 2 electro

More information

Ex m Solenoid Operator Type 0519

Ex m Solenoid Operator Type 0519 nass magnet GmbH Eckenerstrasse 4-6 D-30179 Hannover Doc. No. 113-720-0002 Revision No. 2 01.06.2015 Ex m Solenoid Operator Type 0519 Operating Instructions Dear Customer! To ensure the function and for

More information

Sanitary Pumps Type F 560 S Version with bearing flange

Sanitary Pumps Type F 560 S Version with bearing flange Sanitary Pumps Type F 560 S Version with bearing flange Recommended for transferring Thin to highly viscous, even pasty, still free flowing substances. Typical applications A pump designed to meet the

More information

Operating / Assembly Instructions Type A and CS Coupling

Operating / Assembly Instructions Type A and CS Coupling Page: 1 of 14 Subject Index 1. Technical Data 2. Hints 2.1. General Hints 2.2. Warning and Safety Hints. 2.3. General Hints to Danger. 2.4. Proper use. 3. Storage. 4. Assembly. 4.1. Coupling components.

More information

SATRON VDt Differential Pressure Transmitter

SATRON VDt Differential Pressure Transmitter SATRON VDt differential pressure transmitter belongs to V-transmitter family. The series V transmitters have both analog and smart properties. SATRON VDt is used for -,1kPa...-15 MPa ranges. It is a 2-wire

More information

SATRON VT Pressure Transmitter

SATRON VT Pressure Transmitter SATRON VT pressure transmitter belongs to the series V-transmitters. SATRON VT is used for 0-1.4 kpa...0-100 MPa ranges. It is a 2-wire transmitter with HART standard communication. In pressure measuring

More information

DC motors. G-motion. CTi Automation - Phone: Fax: Web:

DC motors. G-motion. CTi Automation - Phone: Fax: Web: G-motion No matter which drive solution you imagine, we make your dreams come true. True to our slogan (one stop shopping) we offer you a complete programme of electronic and mechanical drive systems which

More information

Volute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C

Volute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C Volute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C Series CMIT in inline design Series CMAT with axial inlet ATEX 0 a Series CMAT Series

More information

Installation Instructions

Installation Instructions ``````````````````````` Wolf cdn een n en Installation Instructions SDS SPRINGLESS DOOR SYSTEM 230VAC 1PH Date: 23.03.2016 Version: II-SDS-001-01 1 1 1. SAFETY DIRECTIONS Basic Directions This system has

More information

Threaded resistance thermometer Model TR10-C, with fabricated thermowell model TW35

Threaded resistance thermometer Model TR10-C, with fabricated thermowell model TW35 Electrical temperature measurement Threaded resistance thermometer Model TR10-C, with fabricated thermowell model TW35 WIKA data sheet TE 60.03 for further approvals see page 7 Applications Machinery,

More information

BSW , -204 Inductive Rotary Cam Switches. User's Guide. Rotary Cam Switches BSW BSW

BSW , -204 Inductive Rotary Cam Switches. User's Guide. Rotary Cam Switches BSW BSW BSW 86-0, -04 User's Guide Rotary Cam Switches BSW 86-0 BSW 86-04 Balluff GmbH Schurwaldstrasse 9 7765 Neuhausen a.d.f. Germany Tel. +49 758 7-0 Fax +49 758 500 balluff@balluff.de www.balluff.com Read

More information

INDUSTRY PROCESS AND AUTOMATION SOLUTIONS. Technical Bulletin

INDUSTRY PROCESS AND AUTOMATION SOLUTIONS. Technical Bulletin INDUSTRY PROCESS AND AUTOMATION SOLUTIONS Technical Bulletin Guidelines for selection of planetary gear units of the 300- INDUSTRIAL series for installation in hazardous areas, classified by Directive

More information

MODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC

MODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC MODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC ... 3... 4 3000 rpm 50 Hz / 3600 rpm 60 Hz... 4... 5... 7 Modular pump / motor systems... 7 Materials...........................................................

More information

ENGINE WINCHES from 300 to 5000 kg - TS and TD Series

ENGINE WINCHES from 300 to 5000 kg - TS and TD Series ENGINE WINCHES from 300 to 5000 kg - TS and TD Series INSTRUCTION MANUAL START-UP AND MAINTENANCE In an endeavor to improve its products, HUCHEZ reserves the right to alter the equipment described herein,

More information

Classic Rolling Shutters and Classic Rolling Grilles

Classic Rolling Shutters and Classic Rolling Grilles Classic Rolling Shutters and Classic Rolling Grilles Technical Manual: Issue 01.04.2015 Abbreviations Used B U = Width of the steel subframe DHV = Loss of passage height ET DMS = Minimum fitting depth

More information

C-SERIES S-SERIES EMA LINEAR ACTUATORS. Metric Machine Screw Jacks.

C-SERIES S-SERIES EMA LINEAR ACTUATORS. Metric Machine Screw Jacks. C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS 0i 02 Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence:

More information

ILA2D572TC1F0 integrated drive ILA with servo motor V - DeviceNet - indus connector

ILA2D572TC1F0 integrated drive ILA with servo motor V - DeviceNet - indus connector Characteristics integrated drive ILA with servo motor - 24..48 V - DeviceNet - indus connector Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Phase

More information

Roadheaders. Groundbreaking Solutions for Mining & Tunnelling.

Roadheaders. Groundbreaking Solutions for Mining & Tunnelling. Roadheaders Groundbreaking Solutions for Mining & Tunnelling www.schmittwerke.com Features Benefits Robust, modular design Durability Ease of transport and assembly Transverse ripping cutting heads Suitable

More information

Interroll. Product Description. Material Versions. Technical Data. Options. Order Information. Accessories. Standard Asynchronous

Interroll. Product Description. Material Versions. Technical Data. Options. Order Information. Accessories. Standard Asynchronous D rum Motor Product Description Material Versions Applications Characteristics The drum motor is perfect for high torque applications with limited space or access. Small feed conveyors with high-duty cycles

More information

Linear Valve Electric Actuator

Linear Valve Electric Actuator Linear Valve Electric Actuator www.powervalves.nl Company Profile Company Profile Sun Yeh Electrical Ind. Co., Ltd. was founded in 1986. We always strive for technical excellence, innovation and the highest

More information

MIKRO R HETTICH DATA SHEET MICROLITRE CENTRIFUGES FASTER RESULTS IN MOLECULAR BIOLOGY FEATURES HIGHLIGHTS

MIKRO R HETTICH DATA SHEET MICROLITRE CENTRIFUGES FASTER RESULTS IN MOLECULAR BIOLOGY FEATURES HIGHLIGHTS HETTICH DATA SHEET MICROLITRE CENTRIFUGES MIKRO 200 200 R FASTER RESULTS IN MOLECULAR BIOLOGY The MIKRO 200 are amongst the highest-speed microliter centrifuges in their class. s are designed to spin microliter

More information

CENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue

CENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalogue air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalogue Contents GENERAL Description and survey chart Application... 3 General Survey

More information

HOLLOW SPRINGS. BATEGU Gummitechnologie GmbH & Co KG 1190 Vienna, Muthgasse 22 Austria

HOLLOW SPRINGS. BATEGU Gummitechnologie GmbH & Co KG 1190 Vienna, Muthgasse 22 Austria HOLLOW SPRINGS BATEGU Gummitechnologie GmbH & Co KG 1190 Vienna, Muthgasse 22 Austria T. +43 (1) 368 21 53-0 F. + 43 (1) 368 21 53-24 office@bategu.at www.bategu.at Properties: Due to their spherical shape,

More information

Electric Chain Hoists. CLF & CLW Series. The New CLF Series: Reliable, safe, convenient, efficient and compact size

Electric Chain Hoists. CLF & CLW Series. The New CLF Series: Reliable, safe, convenient, efficient and compact size Industrial Cranes Customized Cranes Light Crane Systems Crane Components Electric Wire Rope Hoists Electric Chain Hoists Spare Parts Electric Chain Hoists CLF & CLW Series The New CLF Series: Reliable,

More information

Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)

Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv) Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port

More information

RADEX -N Composite Operating/Assembly instructions

RADEX -N Composite Operating/Assembly instructions 1 of 14 RADEX -N is a torsionally stiff flexible steel lamina coupling. It is able to compensate for shaft misalignment, for example caused by thermal expansion, etc. note ISO 101. Drawn: 0.05.15 Kb/Wig

More information

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve 3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for

More information

A product of Coel Motori Srl, Milano, Italy

A product of Coel Motori Srl, Milano, Italy A product of Coel Motori Srl, Milano, Italy www.coelmotori.it Page 1 Description 2 General Features 3 Mounting 4 Motors 5 PMT85 Performances data 6 PMT95 Performances data 7 PMT105-125 Performances data

More information

Opener with external control unit Opener with integrated control unit (Illustration: Deadman mode)

Opener with external control unit Opener with integrated control unit (Illustration: Deadman mode) Informations Door system Opener with external control unit 1 8 2 7 6 5 6 7 4 Opener with integrated control unit (Illustration: Deadman mode) 1 2 4 Opener with external control unit 1 Opener 2 Control

More information

A44 W0...W2: Motorised actuator

A44 W0...W2: Motorised actuator A44 W0...W2: Motorised actuator How energy efficiency is improved Electric cut-off in end position to save energy Features Actuation of control units such as air dampers, gates, butterfly valves, etc.

More information

ELA Electromechanical Linear Actuators

ELA Electromechanical Linear Actuators ELA Electromechanical Linear Actuators D Electromechanical Linear Actuators ELA Electromechanical Linear Actuators (ELA) consist of a completely enclosed aluminium housing with worm gearing and axial bearing

More information

Technical specifications

Technical specifications KINGDOM OF SAUDI ARABIA THE SAUDI FUND FOR DEVELOPMENT ( SFD) ITB -207-7 Technical specifications Project name: Reconstruction, Furniture and Equipping of Three Schools Photovoltaic Solar System for Holly

More information

I Ex-Safety switches I

I Ex-Safety switches I 3-pole, 20 A Technical data Ex-Safety switch 20 A for variable-speed three-phase drives Marking to 94/9/EC II 2 G Ex ed ia IIC T6 / II 2 D Ex td A21 IP66 T80 C EC-Type Examination Certificate PTB 99 ATEX

More information

Microswitches MK series

Microswitches MK series Microswitches MK series Microswitches of MK series have been developed in order to add new features to traditional and tested microswitches of Pizzato Elettrica. These products have been designed with

More information

TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E

TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415

More information

JUMO DELOS SI. Precision pressure transmitter with switching contacts and display. Application. Brief description. Key features.

JUMO DELOS SI. Precision pressure transmitter with switching contacts and display. Application. Brief description. Key features. Data sheet 405052 Page 1/10 JUMO DELOS SI Precision pressure transmitter with switching contacts and display Application Food & pharma CIP/SIP systems Machine and system construction Air conditioning and

More information

Limit Switch Type 4747

Limit Switch Type 4747 Limit Switch Type 4747 Ex d flameproof enclosure with inductive or mechanical contacts for linear actuators or rotary actuators acc. to VDI/VDE 3845 General The Type 4747 Limit Switch issues an electrical

More information

Free space height 340 (330) height 360 (340) height 400 (360) height

Free space height 340 (330) height 360 (340) height 400 (360) height KLAUS Multiparking GmbH Hermann-Krum-Straße 2 D-8831 Aitrach Fon +4 (0 ) 7 6 08-0 Fax +4 (0 ) 7 6 08-88 info@multiparking.com www.multiparking.com PRODUCT DATA 1 2 2000 kg / 0 kg Page 1 Car Page 6 Garage

More information

TAE pole Contactors

TAE pole Contactors TAE9...26 3-pole Contactors d.c. operated with double-winding coil SB8033C3 Utilisation TAE9 to TAE26 contactors are a compliment to the DC control contactor range. The coils have large voltage ranges

More information

Electropneumatic Converters i/p Converters Type 6111 Mounting and Operating Instructions EB 6111 EN

Electropneumatic Converters i/p Converters Type 6111 Mounting and Operating Instructions EB 6111 EN Electropneumatic Converters i/p Converters Type 6111 Fig. 1 Type 6111 in standard version Fig. Type 6111 mounted on a supply air manifold Fig. 3 Type 6111 in field enclosure Mounting and Operating Instructions

More information

Product Information ECN 425 EQN 437. Absolute Rotary Encoders with Hollow Shaft and Expanding Ring Coupling for Safety-Related Applications

Product Information ECN 425 EQN 437. Absolute Rotary Encoders with Hollow Shaft and Expanding Ring Coupling for Safety-Related Applications Product Information ECN 425 EQN 437 Absolute Rotary Encoders with Hollow Shaft and Expanding Ring Coupling for Safety-Related Applications 4/2014 ECN 425, EQN 437 Rotary encoders for absolute position

More information

10 Load and Motor Switchgear

10 Load and Motor Switchgear 10 Load and Motor gear Safety es 01941E00 Safety switches ensure the obligatory isolation of electrical power under condition of equipment cleaning, maintenance and repair. Other methods of isolation,

More information

Motorized Pulley 80LS A very compact strong drive for small high use conveyors

Motorized Pulley 80LS A very compact strong drive for small high use conveyors Product description This Motorized Pulley is perfect for high torque applications with limited space or access. Characteristics Applications Salt water resistant aluminum bearing housings Small conveyors

More information

Interroll. Material Versions. Product Description. Technical Data. Options. Accessories. Order Information. Standard Asynchronous

Interroll. Material Versions. Product Description. Technical Data. Options. Accessories. Order Information. Standard Asynchronous Product Description Material Versions Applications Characteristics This drum motor has been developed especially for applications requiring a strong drive. Small conveyors with high-duty cycles Airport

More information

Control Equipment. ATHEX bvba Tel: +32 (0) Fax: +32 (0) Alpenroosbaan 2, 2900 Schoten, België

Control Equipment. ATHEX bvba Tel: +32 (0) Fax: +32 (0) Alpenroosbaan 2, 2900 Schoten, België Control Equipment 01616E00 Position switches are used to monitor the position of moving parts of machines and plant. Can be used in safety circuits, as the device satisfies EN 60 947-5-1/DIN VDE 0660 part

More information

Compact System NRGS 11-2 NRGS Original Installation Instructions English

Compact System NRGS 11-2 NRGS Original Installation Instructions English Compact System NRGS 11-2 NRGS 16-2 EN English Original Installation Instructions 810366-05 1 Contents Important Notes Page Usage for the intended purpose...4 Safety note...4 LV (Low Voltage) Directive

More information

SYMBOL LEGEND DANGER WARNING NOTE THIS INDICATES DANGER TO THE LIFE AND HEALTH OF THE USER IS APPROPRIATE PRECAUTIONS ARE NOT TAKEN

SYMBOL LEGEND DANGER WARNING NOTE THIS INDICATES DANGER TO THE LIFE AND HEALTH OF THE USER IS APPROPRIATE PRECAUTIONS ARE NOT TAKEN SYMBOL LEGEND DANGER THIS INDICATES DANGER TO THE LIFE AND HEALTH OF THE USER IS APPROPRIATE PRECAUTIONS ARE NOT TAKEN WARNING THIS WARNS THAT MATERIALS MAY BE DAMAGED IF APPROPRIATE PRECAUTIONS ARE NOT

More information

CLAMPEX KTR 100 Operating/Assembly instructions

CLAMPEX KTR 100 Operating/Assembly instructions 1 of 9 The CLAMPEX clamping set is a frictionally engaged, detachable shaft-to-shaft connection for cylindrical shafts and bores without feather key. Table of contents 1 Technical data 2 2 Advice 4 2.1

More information

SCHMIDT ServoPress. Unmatched Precision and Flexibility

SCHMIDT ServoPress. Unmatched Precision and Flexibility SCHMIDT ServoPress Unmatched Precision and Flexibility An economic and high quality assembly is the key to the success of your product. The aim is to join together precise assemblies from low-cost individual

More information

SPARE PARTS CATALOGUE Z560 BERTA BALE WRAPPER. Sokółka 20...

SPARE PARTS CATALOGUE Z560 BERTA BALE WRAPPER. Sokółka 20... SPARE PARTS CATALOGUE Z560 BERTA BALE WRAPPER Sokółka 20... LIST OF CATALOGUE ITEMS No. Table title Page number 1. Complete main frame 3 2. Wrapping foil feeder 7 3. Stretcher roll, set 11 4. Complete

More information

IECEx Certificate of Conformity

IECEx Certificate of Conformity IECEx Certificate of Conformity Certificate No.: IECEx TUN 04.0006X Date of Issue: 2012-06-12 Issue No.: 3 Page 2 of 4 Manufacturer: FAFNIR GmbH Bahrenfelder Straße 19 22765 Hamburg Germany Manufacturing

More information

Low-Voltage Motors N-compact Standardline Operation on supply system

Low-Voltage Motors N-compact Standardline Operation on supply system Low-Voltage Motors N-compact Standardline Operation on supply system 2 2/2 Overview 2/2 Benefits 2/2 Technical specifications 2/2 Selection and Ordering Data 2/ Options 2/ Dimensional drawings 2/4 More

More information

Dewatering Submersible sewage pumps

Dewatering Submersible sewage pumps Series description Wilo-Drain TP 80/TP 100 Equipment/function Thermal motor monitoring Leakage detection in the motor ATEX-certified Sheath current cooling Materials Pump housing: PUR Impeller: PUR Shaft:

More information

Solenoid Operator 0516 / 1216

Solenoid Operator 0516 / 1216 nass magnet GmbH Edition no. 2 Eckenerstraße 4-6 2007-01-10 D-30179 Hannover Rev.2 070110 Solenoid Operator 0516 / 1216 Operating Instructions NN 8220 126 and EC Declaration of Conformity Dear Customer!

More information

The new rotomoulded tank system ACO Grease and light liquid separators for below ground installation

The new rotomoulded tank system ACO Grease and light liquid separators for below ground installation he new rotomoulded tank system ACO Grease and light liquid separators for below ground installation ACO Light liquid separator Oleopator P Class I Light liquid separator of polyethylene for below ground

More information

Electronic Ignition Module

Electronic Ignition Module 7 607 Electronic Ignition Module TQO31A27 Electronic ignition module for use with oil or gas burners operating with singleor double-pole ignition. The TQO31A27 and this Data Sheet are intended for use

More information

Load Cells SIWAREX WL230 BB-S SA

Load Cells SIWAREX WL230 BB-S SA Load cell The bending beam load cell is particularly suitable for use in small-scale container and platform scales. The measuring element is a double bending beam made of stainless steel to which 4 strain

More information

IECEx Certificate of Conformity

IECEx Certificate of Conformity IECEx Certificate of Conformity Certificate No.: IECEx TUN 04.0006X Date of Issue: 2014-04-01 Issue No.: 4 Page 2 of 4 Manufacturer: FAFNIR GmbH Bahrenfelder Straße 19 22765 Hamburg Additional Manufacturing

More information

Drive units for cranes and hoists. Durable Reliable Powerful

Drive units for cranes and hoists. Durable Reliable Powerful Drive units for cranes and hoists Durable Reliable Powerful Reliability in many areas ABM Greiffenberger develops and manufactures cutting edge drive unit solutions in highest quality. The individual components

More information

Flow limiter SP/SMB9 for mounting plates

Flow limiter SP/SMB9 for mounting plates 1-3002-EN Flow limiter SP/SMB for mounting plates Advantages reliable perpetual dispensation of individual volume flows - self-adjusting metering, thus identical volume flows despite different back pressures.

More information

GEARBOXES for operation of industrial valves

GEARBOXES for operation of industrial valves GEARBOXES for operation of industrial valves TECHNICAL DOCUMENTATION 2018 Part-turn gearboxes GS 50.3 GS 250.3 GS 50.3 GS 250.3 with base and lever GS 315 GS 500 GS 630.3 GHE 05.1 GHE 12.1 Multi-turn gearboxes

More information

Industrial Switchgear New Products Catalogue Pole Switching with the DILMP Contactors

Industrial Switchgear New Products Catalogue Pole Switching with the DILMP Contactors Industrial Switchgear New Products Catalogue 2007 4 Pole Switching with the The complete range of contactors, efficient motorstarters and variable speed drives for the motor circuit. New simple to install

More information

UD and UC Gear pump unit

UD and UC Gear pump unit 1-19-EN for SKF CircOil or hydraulic lubrication systems General Information The UC and UD gear pump units are vertically or horizontally arranged units that are used in hydraulic or circulating-oil lubrication

More information

Defender Mini Online Emergency Central Lighting Inverter (CLI) Technical Specifications

Defender Mini Online Emergency Central Lighting Inverter (CLI) Technical Specifications Defender Mini Online Emergency Central Lighting Inverter (CLI) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. The Defender Mini CLI specification describes a single phase, online, solid state Lighting

More information

NEW. Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm. E03.050e

NEW. Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm. E03.050e Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm NEW E03.050e Backlash free positioning Excellent concentricity Quick mounting by central clamping nut Issue

More information

Magnetic Field Sensor for pneumatic cylinders BIM-UNT-AY1X/S1139

Magnetic Field Sensor for pneumatic cylinders BIM-UNT-AY1X/S1139 ATEX category II 1 G, Ex Zone 0 ATEX category II 1 D, Ex Zone 20 For T-groove cylinders without mounting accessories Optional accessories for mounting on other cylindrical housings. One-hand mounting possible

More information