ELEKTROMATEN SI FI Safedrive with built-on frequency inverter

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "ELEKTROMATEN SI FI Safedrive with built-on frequency inverter"

Transcription

1 SI FI Safedrive with built-on frequency inverter For driving: High-speed sectional doors and high-speed rolling doors which require an anti-fallback device Series SGF SI,.0 FI - SI.0 FI Series SG8F SI 0.00 FI - SI.0 FI Series SGF SI 0.80 FI - SI 80. FI Safedrive FI SI are special drives for industrial doors which require an anti-fallback device. The patented safety brake is built into the gear. The drive unit is fitted directly to the door shaft. Safedrive SI FI comprises of: Worm gear with safety brake and hollow shaft, emergency manual operator, integrated limit switches and electrical motor with built-on frequency inverter. SGF Patented built-in safety brake Safety against failure of worm or wheel Independent of speed / direction Maintenance free, self-monitoring Excellent damping characteristics in operation Built-on frequency inverter to be used with door controls TS 90, TS 9 or TS 98 Individual adjustable output speed The speed appears directly into the display extra work to evaluate frequency and speed is not required Soft start and soft stop Automatic optimising of acceleration and deceleration speed Adjustable distance for acceleration and deceleration speed Individual adjustment and programming of all functions from the ground by a rotary switch and display SG8F SGF Approvals and certificates and FI-motors Type test according to: DIN EN DIN EN 0- DIN EN 0--0 TÜV NORD CERT GmbH Built-in safety brake Certificate of conformity according to: DIN EN 0 / 0 TÜV SÜD Industrieservice GmbH Emergency manual operation Hand crank NHK Hand chain operator KNH Limit switches Digital limit DES Absolute encoder, after a power failure, re-adjustment is not required Mounting Floating foot (standard fitting) Torque mount Special versions Other drive speeds and other drive torques on request Door controls Simple connection to the limit switch by means of non-interchangeable plug connections allowing simple exchange with other GfA door controls Control voltage: V DC Frequency: 0 / 0 Hz Mains supply at motors with 0,8/,kW: N~0V, N~00V Mains supply at motors with,kw: N~00V, ~00V Details of all GfA door controls can be found in Section 8. See. Subject to alterations. (_Ge).0

2 . Technical data. SGF Output torque - 0 / 0,8kW Series Output torque Output speed OPEN CLOSE >,m CLOSE,m Output shaft / hollow shaft (Ø) Locking torque Safety brake (approval number) Motor power Supply voltage Operating frequency Max. movements per hour Supply side wiring / fusing (delayed action) Limit switch range Max. hand force NHK / KNH Weight Spare parts: Catalogue page Part no. installation drawing (dxf, dwg) Part no. rpm mm kw V Hz N kg SI,.0 FI SI.0 FI SI 8.80 FI SI.00 FI SI.0 FI SGF SGF SGF SGF SGF /, / 0 /, / 0 /, / 0 /, / 0 /, / 0 /, / 0 /, / 0 /, / 0 /, / 0 /, / / 0 / 0 / 0 / 0 / 0 0,8 0,8 0,8 0,8 0,8 N~0V N~0V N~0V N~0V N~0V 0 / 0 0 /0 0 /0 0 /0 0 / x,² / x,² / x,² / x,² / x,² / / 0 99 / / / 8 / (9.0) (9.0) (9.0) (9.0) (9.0) (Ø) 000xxxx (Ø,) (Ø0) 000xxxx (Ø,) 0000 (Ø0) (Ø) (Ø,) 000 (Ø0) 000xxxx (Ø,) (Ø0) (Ø) (Ø,) 0008 (Ø0) 000xxxx (Ø,) (Ø0) 0008 (Ø) 0008 (Ø,) 000 (Ø0) 0008 (Ø,) 0008 (Ø0) 0008 (Ø) (Ø,) 0008 (Ø0) (Ø,) (Ø0). SG8F Output torque /,kw Series Output torque Output speed Footnotes under. OPEN CLOSE >,m CLOSE,m Output shaft / hollow shaft (Ø) Locking torque Safety brake (approval number) Motor power Supply voltage Operating frequency Max. movements per hour Supply side wiring / fusing (delayed action) Limit switch range Max. hand force NHK / KNH Weight Spare parts: Catalogue page Part no. installation drawing (dxf, dwg) Part no. rpm mm kw V Hz N kg SI 0.00 FI SI.0 FI SI 0.00 FI SG8F SG8F SG8F / 0 0 / 0 0 / ,0,0,0 N~0V N~0V N~0V 0 / 0 0 / 0 0 / x,² / x,² / x,² / / 9 9 / 0 / (9.0) (9.0) (9.0) (Ø0) 000 (Ø0) 000 (Ø0) 0009 (Ø0) 000 (Ø0) 000 (Ø0).0 Subject to alterations. (_Ge)

3 . SG8F Output torque 0-0 /,kw Series Output torque Output speed OPEN CLOSE >,m CLOSE,m Output shaft / hollow shaft (Ø) Locking torque Safety brake (approval number) Motor power Supply voltage Operating frequency Max. movements per hour Supply side wiring / fusing (delayed action) Limit switch range Max. hand force NHK / KNH Weight Spare parts: Catalogue page Part no. installation drawing (dxf, dwg) Part no. rpm mm kw V Hz N kg SI.0 FI SI.80 FI SI 0.0 FI SI. FI SG8F SG8F SG8F SG8F /, / 0 0 /, / ,0,0,0,0 N~0V N~0V N~0V N~0V 0 / 0 0 / 0 0 / 0 0 / 0 0 x,² / x,² / x,² / x,² / / 99 / / / 0 (9.0) (9.0) (9.0) (9.0) (Ø0) 0000 (Ø,) 0008 (Ø0) 0008 (Ø0) (Ø,) 0008 (Ø0) SG8F Output torque 0-0 /,kw Series Output torque Output speed Footnotes under. OPEN CLOSE >,m CLOSE,m Output shaft / hollow shaft (Ø) Locking torque Safety brake (approval number) Motor power Supply voltage Operating frequency Max. movements per hour Supply side wiring / fusing (delayed action) Limit switch range Max. hand force NHK / KNH Weight Spare parts: Catalogue page Part no. installation drawing (dxf, dwg) Part no. rpm mm kw V Hz N kg SI.0 FI SI.00 FI SI.0 FI SI.0 FI SG8F SG8F SG8F SG8F ,0,0,0,0 ~00V ~00V ~00V ~00V 0 / 0 0 / 0 0 / 0 0 / x,² / x,² / x,² / x,² / / / 8 / 0 / 8 (9.0) (9.0) (9.0) (9.0) Subject to alterations. (_Ge).0

4 . SGF Output torque /,kw Series Output torque Output speed OPEN CLOSE >,m CLOSE,m Output shaft / hollow shaft (Ø) Locking torque Safety brake (approval number) Motor power Supply voltage Operating frequency Max. movements per hour Supply side wiring / fusing (delayed action) Limit switch range Max. hand force NHK / KNH Weight Spare parts: Catalogue page Part no. installation drawing (dxf, dwg) Part no. rpm mm kw V Hz N kg SI 0.80 FI SI. FI SI 00.0 FI SI 0.0 FI SI 80. FI SGF SGF SGF SGF SGF / 0 / 0 / 0 / 0 / 0,0,0,0,0,0 ~00V ~00V ~00V ~00V ~00V 0 / 0 0 / 0 0 / 0 0 / 0 0 / x,² / x,² / x,² / x,² / x,² / / 90 / 0 / / 8 / (09.08) (09.08) (09.08) (09.08) (09.08) Generally applies: Protection class IP, permissible temperature range + C...+0 C (+0 C), operating sound pressure level SPL 0 db(a) See. See. When using a temperature range of +0 C...+0 C use half of maximum movements per hour, see also. Maximum revolutions of hollow shaft, E0 standard with DES See. List of spare parts for all SI FI does not apply to motor and gear, we can draw up article- and / or model-specific lists of spare parts on request. Selection chart. Roller shutters Tube EN 00 [mm] SI.0 FI SI.80 FI SI 0.0 FI SI. FI SI.0 FI SI.0 FI SI 0.80 FI SI. FI SI 00.0 FI SI 0.0 FI SI 80. FI 0, x, ,0 x, ,0 x, ,0 x, ,8 x, , x, , x, , x, ,0 x, , x, ,9 x, F = Lift [N] Read note in. Includes 0% friction for single-wall profiles (profile thickness 0 mm) Select not mentioned drives as required by the door construction. Sectional doors Cable drum [mm] SI.0 FI SI.0 FI SI.80 FI SI 0.0 FI SI. FI SI.0 Fi SI.0 FI SI 0.80 FI SI. FI SI 00.0 FI SI 0.0 FI Ø Ø F = Lift [N] Read notes in. and. Includes 0% friction Select not mentioned drives as required by the door construction.0 Subject to alterations. (_Ge)

5 . Notes. European directive In accordance with the product standard EN - Doors- and EN Safety in use of power operated doors-requirements.. Selection chart / Movements per hour Reduce weight of the door if the stated number of movements per hour is exceeded (See item -. Technical data) e.g. high frequently used doors (enquire). The selection chart includes 0% friction for roller shutters with single-wall profiles (profile thickness 0mm) and 0% friction for sectional doors. Reduce the weight by a further 0% for vertical lifted doors and insulated shutters with double walled, thick and / or deep sections. Do not calculate using the tube diameter. The highest torque will occur normally after - turns of the barrel from close.. Gear self-braking / Brake Drives without an electric brake have a self-sustaining worm gear and stop automatically. On drives with an electric brake, stopping is achieved by the external brake. Brake inspection must always be carried out by qualified service engineers.. Locking torque / Holding torque The permissible loads on walls, fastenings, mountings and transmission elements must not be exceeded, even for maximum holding torques or locking torques.. Output speed The maximum admissible speed is dependent on the door construction and type of the door. All materials must be designed to be used for doors with higher speeds. The admissible closing speed shall be adjusted so that the operating forces must comply with EN. Cable / Cable drums When calculating the cable size the max. permitted door weight is required with a safety of x for the cables requirement of EN 0. Cable drum selection ensure that two turns of the cable remain on the drum at all times. The diameter of the cable drum must be at least 0x the diameter of the cable.. Manual operation In accordance with EN and 0 hand force up to 90 N is permissible. For large, heavy doors, manual operation is only used for closing the door. In the case of drive units with an electric brake; emergency manual operation is carried out against the closed brake (Read note in.).. Dimensions. SI,.0 FI SI.0 FI SGF Ø D H B 8, 8, 8,, 0, 8,,, 0, Worm gear with safety brake Motor with built-on frequency inverter Limit switch Hand crank NHK Floating foot Brake on motor Brake on gear L L SI.00 FI 09 SI,.0 FI SI.0 FI SI 8.80 FI SI.0 FI } 9 9 Permitted installation: horizontal (as shown) or vertical (motor at the bottom) Subject to alterations. (_Ge).0

6 . SI 0.00 FI SI.0 FI SG8F SI 0.00 FI SI.0 FI SI 0.00 FI SI.0 FI SI.80 FI SI 0.0 FI SI. FI SI.0 FI SI.00 FI SI.0 FI SI.0 FI L L Worm gear with Hand crank NHK Motor with built-on Floating foot Brake safety brake ØD H B 0, 0,,, 8, frequency inverter nd brake (not shown) Limit switch Permitted installation: horizontal (as shown) or vertical (motor at the bottom). SI 0.80 FI SI 80. FI SGF 8 D H B L L SI 0.80 FI SI. FI SI 00.0 FI SI 0.0 FI SI 80. FI 0 9, 9, 9, 9,, Worm gear with safety brake Motor with built-on frequency inverter Limit switch Hand crank NHK Floating foot Brake Intermediate gear (not shown) 8 nd brake (not shown) Permitted installation: horizontal (as shown), vertical (motor at the bottom) only with torque mount (page.0 item.).0 Subject to alterations. (_Ge)

7 . Emergency manual operation for horizontal or vertical installation Manual hand crank operation NHK (Standard) Manual hand crank with knuckle joint NHKK Hand chain operator KNH Flange in use with: SI,.0 FI, SI.0 FI, SI 8.80 FI, SI.00 FI, SI.0 FI, SI.0 FI, SI.00 FI, SI 80. FI Manual forces, see item of technical data For Series L H SGF / SG8F SGF SGF / SG8F Read note in.. Attachments / Accessories. Bracket (SI 80. FI). Bracket For Series Max. load SGF / SG8F SGF ( SI 0.0 FI) kn kn For Series Max. load SGF (SI 80. FI) kn. Torque mount For Series ØD L L L L L SGF SGF / SG8F SG8F SGF SGF ,,9 9,, 9, Right- or left-hand use vertical (as shown) or horizontal (for vertikal mounting, the FI-motor has to be turned by 90 ) For mounting with floating foot (additional requirements: bracket. or. and bearing) Subject to alterations. (_Ge).0

8 . Cable drum D D B D L Cable drum-ø 0mm For tube-ø mm for SI.0 FI / SI.0 FI / SI.80 FI SI 0.0 FI / SI. FI / SI.0 FI / SI.0 FI / SI 0.80 FI cable -Ø Useful cable length mm 9 m 8 mm, m Lead Right Left Right Left Permitted cable force D D D L 800 N N 98 Cable drum-ø 00mm For tube-ø 9mm for SI 0.0 FI / SI. FI / SI.0 FI SI 0.0 FI/ SI. FI / SI.0 FI / SI.0 FI / SI 0.80 FI SI. FI / SI 00.0 FI / SI 0.0 FI cable -Ø Useful cable length mm m 8 mm, m 0 mm 0 m Lead Right Left Right Left Right Left Permitted cable force D D D L 880 N N N 00 N Read notes in. In case of B mm.08 Subject to alterations. (_Ge)

9 SI FI Safedrive with built-on frequency inverter For driving: Non-balanced sectional doors, roller shutters and rolling grilles which require an anti-fallback device Series SG8F SI 00.0 FI Safedrive FI SI are special drives for industrial doors which require an anti-fallback device. The patented safety brake is built into the gear. The drive unit is fitted directly to the door shaft. Safedrive SI FI comprises of: Worm gear with safety brake and hollow shaft, emergency manual operator, integrated limit switches and electrical motor with built-on frequency inverter. SG8F Patented built-in safety brake Safety against failure of worm or wheel Independent of speed / direction Maintenance free, self-monitoring Excellent damping characteristics in operation Built-on frequency inverter to be used with door controls TS 90, TS 9 or TS 98 Individual adjustable output speed The speed appears directly into the display extra work to evaluate frequency and speed is not required Soft start and soft stop Automatic optimising of acceleration and deceleration speed Adjustable distance for acceleration and deceleration speed Individual adjustment and programming of all functions from the ground by a rotary switch and display Approvals and certificates and FI-motors Type test according to: DIN EN DIN EN 0- DIN EN 0--0 TÜV NORD CERT GmbH Built-in safety brake Certificate of conformity according to: DIN EN 0 / 0 ift Rosenheim GmbH Emergency manual operation Hand chain operator KNH Limit switches Digital limit DES Absolute encoder, after a power failure, re-adjustment is not required Mounting Floating foot (Fitting requires a torque mount system) Door controls Simple connection to the limit switch by means of non-interchangeable plug connections allowing simple exchange with other GfA door controls Control voltage: V Frequency: 0 / 0 Hz Mains supply: N~00V, ~00V Details of all GfA door controls can be found in Section 8. See. Subject to alterations. (_Dd).

10 . Technical data Series Output torque Output speed OPEN CLOSE >,m CLOSE,m Output shaft / hollow shaft (Ø) Locking torque Safety brake (approval number) Motor power Supply voltage Operating frequency Max. movements per hour Supply side wiring / fusing (delayed action)) Limit switch range Max. hand force KNH Weight Part no. installation drawing (dxf, dwg) Part no. rpm mm kw V Hz N kg SI 00.0 FI SG8F PR,0 ~00 0 / 0 8 x,² / Generally applies: Protection class IP, permissible temperature range + C...+0 C (+0 C), operating sound pressure level SPL 0 db(a) See. See. When using a temperature range of +0 C...+0 C use half of maximum movements per hour, see also. Maximum revolutions of hollow shaft See.. Selection chart Roller shutters Tube EN 00 [mm] SI 00.0 FI v b [cm/s] 98, x, 8, -,,9 x, 9, - 8,0 8,0 x 8,0 0 8, - 0, 0, x 8,8 8 8,9 -, F = Lift [N] v b = Range of speed Includes 0% friction for single-wall profiles (profile thickness 0 mm) Read note in.. Subject to alterations. (_Dd)

11 . Notes. European directive In accordance with the product standard EN - Doors- and EN Safety in use of power operated doors-requirements.. Selection chart / Movements per hour Reduce weight of the door if the stated number of movements per hour is exceeded (See item -. Technical data) e.g. high frequently used doors (enquire). The selection chart includes 0% friction for roller shutters with single-wall profiles (profile thickness 0mm) and 0% friction for sectional doors. Reduce the weight by a further 0% for vertical lifted doors and insulated shutters with double walled, thick and / or deep sections. Do not calculate using the tube diameter. The highest torque will occur normally after - turns of the barrel from close.. Gear self-braking / Brake Drives without an electric brake have a self-sustaining worm gear and stop automatically. On drives with an electric brake, stopping is achieved by the external brake. Brake inspection must always be carried out by qualified service engineers.. Manual operation In accordance with EN and 0 hand force up to 90 N is permissible. For large, heavy doors, manual operation is only used for closing the door. In the case of drive units with an electric brake; emergency manual operation is carried out against the closed brake (Read note in.).. Locking torque / Holding torque The permissible loads on walls, fastenings, mountings and transmission elements must not be exceeded, even for maximum holding torques or locking torques.. Output speed The maximum admissible speed is dependent on the door construction and type of the door. All materials must be designed to be used for doors with higher speeds. The admissible closing speed shall be adjusted so that the operating forces must comply with EN. Dimensions SI 00.0 FI SG8F Worm gear with safety brake Motor with built-on frequency inverter Limit switch Hand chain operaotr KNH Floating foot Brake Fitting belt Permitted installation: horizontal with an additional torque mount system, see Subject to alterations. (_Dd).

12 . Emergency manual operation for horizontal or vertical installation Hand chain operator KNH Manual forces, see item of technical data Read note in.. Attachments / Accessories Bracket Mounting of the door shaft via separat bearing nd bracket as a torque mount is required. For series Max. load SG8F kn Permitted installation: horizontal Subject to alterations. (_Dd)

Mechanical Operating Instructions

Mechanical Operating Instructions Mechanical Operating Instructions SE 5.24 WS / SE 5.24 51172095 / 04.2006 Bau muster Zertifizierung geprüft EN 13241-1 OPERATING INSTRUCTIONS 52210111 consisting of: M : Mechanical Operating Instructions

More information

Rolling door drives and controls robust and safe

Rolling door drives and controls robust and safe Rolling door drives and controls robust and safe A lot of advantages The robust elero door drives are available in different versions. Combined with equal controls they offer a solution for almost every

More information

SPARE PARTS CATALOGUE Z560 BERTA BALE WRAPPER. Sokółka 20...

SPARE PARTS CATALOGUE Z560 BERTA BALE WRAPPER. Sokółka 20... SPARE PARTS CATALOGUE Z560 BERTA BALE WRAPPER Sokółka 20... LIST OF CATALOGUE ITEMS No. Table title Page number 1. Complete main frame 3 2. Wrapping foil feeder 7 3. Stretcher roll, set 11 4. Complete

More information

COMBISTOP NEW. Spring applied brakes

COMBISTOP NEW. Spring applied brakes COMBISTOP NEW Spring applied brakes With manufacturing sites on three continents and a global sales network KEB ensures worldwide availability and support of the KEB COMBISTOP 38. This latest generation

More information

DATAFLEX 42/1000 Torque Measuring Shaft Operating/Assembly instructions DATAFLEX

DATAFLEX 42/1000 Torque Measuring Shaft Operating/Assembly instructions DATAFLEX DATAFLEX 4/1000 1 of 1 DATAFLEX Torque measuring shaft type 4/1000 Drawn: 017-01-0 Shg/Koe Replaced for: dated 015-04-13 Verified: 017-01-0 Shg Replaced by: DATAFLEX 4/1000 of 1 DATAFLEX is a maintenance-free

More information

Load Cells SIWAREX WL230 BB-S SA

Load Cells SIWAREX WL230 BB-S SA Load cell The bending beam load cell is particularly suitable for use in small-scale container and platform scales. The measuring element is a double bending beam made of stainless steel to which 4 strain

More information

Assembly and Operating Instructions

Assembly and Operating Instructions A35AE FU...A150AE FU en Assembly and Operating Instructions Plug-in drives Important information for: Fitters / Electricians / Users Please forward accordingly! These instructions must be kept safe for

More information

Flow limiter SP/SMB13 for line installation in circulating-oil lubrication systems.

Flow limiter SP/SMB13 for line installation in circulating-oil lubrication systems. 1-3004-EN Flow limiter SP/SMB13 for line installation in circulating-oil lubrication systems. Flow limiters are used in circulating-oil lubrication systems. The task of a flow limiter is to divide up the

More information

Rotary Measurement Technology Encoder Accessories

Rotary Measurement Technology Encoder Accessories Incremental encoder bracket (T8.58XX) 8.0010.7000.0010 Spring loaded right angle bracket for measuring wheels and rack and pinion systems Used with clamping flange 58 mm face mount screws included Incremental

More information

ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)

ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP

More information

ARI-STEVI ANSI (NPS 1/2" - 2") with electric and pneumatic actuators Control valve in straightway form

ARI-STEVI ANSI (NPS 1/2 - 2) with electric and pneumatic actuators Control valve in straightway form with electric and pneumatic actuators Control valve in straightway form ARI-STEVI 440 - ANSI Pneumatic actuator ARI-DP 32-33 Reversible pneumatic actuator Actuator with rolling diaphragm Air supply pressure

More information

Opener with external control unit Opener with integrated control unit (Illustration: Deadman mode)

Opener with external control unit Opener with integrated control unit (Illustration: Deadman mode) Informations Door system Opener with external control unit 1 8 2 7 6 5 6 7 4 Opener with integrated control unit (Illustration: Deadman mode) 1 2 4 Opener with external control unit 1 Opener 2 Control

More information

Screw limit switches XRBA and XR2. Catalogue

Screw limit switches XRBA and XR2. Catalogue XRBA and XR2 Catalogue Contents XRBA and XR2 Selection guide.............................................. page 2 for standard duty: XRBA Presentation.............................................. page

More information

Interroll. Material Versions. Product Description. Technical Data. Options. Accessories. Order Information. Standard Asynchronous

Interroll. Material Versions. Product Description. Technical Data. Options. Accessories. Order Information. Standard Asynchronous Product Description Material Versions Applications Characteristics This drum motor has been developed especially for applications requiring a strong drive. Small conveyors with high-duty cycles Airport

More information

SPARE PARTS CATALOGUE SELF-LOADING BALE WRAPPER Z-577 Sokół. Sokółka 20...

SPARE PARTS CATALOGUE SELF-LOADING BALE WRAPPER Z-577 Sokół. Sokółka 20... SPARE PARTS CATALOGUE SELF-LOADING BALE WRAPPER Z-577 Sokół Sokółka 20... LIST OF CATALOGUE ITEMS No. Table title Page number 1. Complete lower frame 3 2. Wrapping film feeder 9 3. Movable frame 13 4.

More information

CENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue

CENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalogue air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalogue Contents GENERAL Description and survey chart Application... 3 General Survey

More information

DRIVE-TECHNOLOGY INKOMA - GROUP. KG bevel shaft mounting right angle gear units

DRIVE-TECHNOLOGY INKOMA - GROUP. KG bevel shaft mounting right angle gear units -GROUP - DRIVE-TECHNOLOGY GROUP KG bevel shaft mounting right angle gear units -GROUP Headoffice Sitz der Maschinenbau GmbH Neue Reihe 44 D - 38162 Schandelah - Germany phone: +49/(0)5306-9221-0 fax: +49/(0)5306-9221-50

More information

Immersion Pumps PS and PSL ( Slurp Pump ) sealless

Immersion Pumps PS and PSL ( Slurp Pump ) sealless Immersion Pumps PS and PSL ( Slurp Pump ) sealless 1-6014-US Centrifugal pumps of metal for clean, polluted and viscous fluids Technical data Delivery rate Q max = 1250 l/min Delivery head H max = 105

More information

IECEx Certificate of Conformity

IECEx Certificate of Conformity IECEx Certificate of Conformity Certificate No.: IECEx TUN 04.0006X Date of Issue: 2012-06-12 Issue No.: 3 Page 2 of 4 Manufacturer: FAFNIR GmbH Bahrenfelder Straße 19 22765 Hamburg Germany Manufacturing

More information

Horizontal Directional Drilling Rigs t

Horizontal Directional Drilling Rigs t Made in Germany Horizontal Directional Drilling Rigs 30-100 t HDD-RIGS 300 kn - 1,000 kn pull force (30 t - 100 t) 18 knm - 64 knm torque PRIME DRILLING operates worldwide and is specialised in Horizontal

More information

Interroll. Material Versions. Product Description. Technical Data. Options. Accessories. Order Information. Standard Asynchronous

Interroll. Material Versions. Product Description. Technical Data. Options. Accessories. Order Information. Standard Asynchronous D rum Motor Product Description Material Versions Applications Characteristics The drum motor is outstandingly robust with a strong torque and can take a high radial load. Conveyors with high-duty cycles

More information

EBA 21. Small Centrifuge

EBA 21. Small Centrifuge EBA 21 Small Centrifuge EBA 21 PERFORMANCE Maximum performance in microlitre centrifugation coupled with reliability in daily laboratory tasks. The EBA 21 is powerful and versatile not only in microlitre

More information

Door Control Panel TS 960. instructions. (Design and functions subject to change) /

Door Control Panel TS 960. instructions. (Design and functions subject to change) / Electrical operating Operating instructions Door Control Panel TS 960 GB (Design and functions subject to change) 51171098 / 10.2002 OPERATING INSTRUCTIONS PAGE SAFETY DIRECTIONS...4 FUNCTION OVERVIEW...6

More information

ROBATIC ROBA -quick ROBA -takt. Reliable coupling and braking.

ROBATIC ROBA -quick ROBA -takt. Reliable coupling and braking. Reliable coupling and braking Equipment Technology Packaging Machinery Conveyors and Materials Handling Equipment Door drives Indexing tables ROBATIC ROBA -quick ROBA -takt www.mayr.de Electromagnetic

More information

Orbital Motors OMS, OMT and OMV Orbital Motors

Orbital Motors OMS, OMT and OMV Orbital Motors MKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV Orbital Motors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 214 Converted

More information

Lenze. Drives with worm gearboxes 52.

Lenze. Drives with worm gearboxes 52. 6 887 Lenze Drives with worm gearboxes 5. Lenze Drive Systems GmbH, Postfach 0 5, D-76 Hameln, Site: Groß Berkel, Hans-Lenze-Straße, D-855 Aerzen, Phone ++9 (0) 55 8-0, Telefax ++9 (0) 55 8- E-Mail: Lenze@Lenze.de

More information

TWO STAGE PROGRESSIVE AND MODULATING GAS BURNERS RIELLO 40 GS/M SERIES GS 10/M 22/ kw GS 20/M 43/ kw

TWO STAGE PROGRESSIVE AND MODULATING GAS BURNERS RIELLO 40 GS/M SERIES GS 10/M 22/ kw GS 20/M 43/ kw TWO STAGE PROGRESSIVE AND MODULATING GAS BURNERS RIELLO GS/M SERIES GS /M / 5 3/8 19 The Riello GS/M series of two stage progressive or modulating gas burners, is a complete range of products developed

More information

CPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm

CPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm 95 Nm to 2900 Nm Introduction The range of IP23 protection CPLS asynchronous motors was designed for fixed and variable speed applications when there is little space available or (and) there is a wide

More information

Off-line Oil Filter Module Pi 8400

Off-line Oil Filter Module Pi 8400 Off-line Oil Filter Module Pi 8400 Volume flow l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance

More information

Installation Manual. RW240/400/600 Motor Gearbox

Installation Manual. RW240/400/600 Motor Gearbox Installation Manual RW240/400/600 Motor Gearbox Ridder Drive Systems Lorentzstraat 36-38 C 3846 AX Harderwijk P.O. Box 360 C 3840 AJ Harderwijk The Netherlands T +31 (0)341 416 854 C F +31 (0)341 416 611

More information

Line filter. Features. RE 51400/01.09 Replaces: Types 40/100 LEN 0040 to 0400; 40/100 LE 0003, 0015, 0018

Line filter. Features. RE 51400/01.09 Replaces: Types 40/100 LEN 0040 to 0400; 40/100 LE 0003, 0015, 0018 Line filter RE /.9 Replaces: 8.8 / Types / LEN to ; / LE,, 8 Nominal sizes according to DIN : to Nominal sizes according to BRFS:,, 8 Nominal pressures, bar Connections up to G / Operating temperature

More information

SATRON VTe pressure transmitter

SATRON VTe pressure transmitter SATRON VTe pressure transmitter belongs to the series V-transmitters which will have both analog and smart properties. SATRON VTe is used for 0-4 kpa...0-00 MPa ranges. The transmitter communicates in

More information

Compact Safedrive with built-in Safety Brake. innovative drive systems for industrial doors. Variable Speed Safedrive with built-in Safety Brake

Compact Safedrive with built-in Safety Brake. innovative drive systems for industrial doors. Variable Speed Safedrive with built-in Safety Brake GfA-ELEKTROMATEN Chain Drive Operatr fr Rller Shutter Cmpact Safedrive with built-in Safety Brake Safedrive with built-in Safety Brake Chain Drive with separate Safety Brake Fire Shutter Operatr innvative

More information

ELASTOMERIC ISOLATORS

ELASTOMERIC ISOLATORS ELASTOMERIC ISOLATORS ELASTOMERIC ISOLATORS series SI S02 INTRODUCTION CERTIFICATIONS In 1992, FIP Industriale secured CISQ-ICIM certification for its Quality Assurance System in conformance with EN 29001

More information

4,5 / 27 2,0 / steel, black coated. clockwise, viewed from the front face. ø15,9 ø17-0,052 ø6-0,05. ø3,5 8,1 ±0,3 2, T

4,5 / 27 2,0 / steel, black coated. clockwise, viewed from the front face. ø15,9 ø17-0,052 ø6-0,05. ø3,5 8,1 ±0,3 2, T DC-Micromotors Precious Metal Commutation mnm For combination with (overview on page 4-5) Gearheads: 5, 6, 6/7 Encoders: IE 6... 5 Series 3 4 77... SR Nominal voltage Terminal resistance Output power Efficiency

More information

Electrical operating instructions

Electrical operating instructions en Electrical operating instructions Door control panel TS 958 Software 1.0 - (Design and functions subject to change) 51171324 - c 03.2007 OPERATING INSTRUCTIONS Page SAFETY DIRECTIONS...4 INSTALLATION

More information

Permanent magnet brakes. Safety from the market leader. PM Line High Torque Line

Permanent magnet brakes. Safety from the market leader. PM Line High Torque Line Permanent magnet brakes Safety from the market leader PM Line High Torque Line Industrial Drive Systems Die Welt von Kendrion Industrial Drive Systems Kendrion The brake experts As a solution provider,

More information

RADEX -N Operating/Assembly instructions

RADEX -N Operating/Assembly instructions 1 of 30 Steel lamina couplings types NN, NANA 1 to 4, NENA 1 and 2, NENE 1, NNZ, NNW according to directive 2014/34/EU for finish bored, pilot bored and unbored couplings type NN type NANA 1 type NNZ type

More information

Spindles and converters

Spindles and converters High Speed Spindles F A C T S A B O U T Spindles and converters SPINTEC spindles are designed for clients with high demands on accuracy and reliability of service. The spindles are manufactured with the

More information

Chain wheel rolling door drives DKM 170, 250, 350, 500 and 750 WKM 170

Chain wheel rolling door drives DKM 170, 250, 350, 500 and 750 WKM 170 EN Chain wheel rolling door drives DKM 170, 250, 350, 500 and 750 WKM 170 Assembly instructions (translation) DIN EN ISO 9001: 2008 Certificate 01 100 07001/03 For the safety of persons it is important

More information

Low-Voltage Motors N-compact Standardline Operation on supply system

Low-Voltage Motors N-compact Standardline Operation on supply system Low-Voltage Motors N-compact Standardline Operation on supply system 2 2/2 Overview 2/2 Benefits 2/2 Technical specifications 2/2 Selection and Ordering Data 2/ Options 2/ Dimensional drawings 2/4 More

More information

Clamping device Ratio-Clamp. Safe and efficient fixation of round rods

Clamping device Ratio-Clamp. Safe and efficient fixation of round rods Clamping device Safe and efficient fixation of round rods 2 3 The patented clamping device fixes any round rod directly from the standstill and completely locks it into position. The clamping effect is

More information

JUMO DELOS SI. Precision pressure transmitter with switching contacts and display. Application. Brief description. Key features.

JUMO DELOS SI. Precision pressure transmitter with switching contacts and display. Application. Brief description. Key features. Data sheet 405052 Page 1/10 JUMO DELOS SI Precision pressure transmitter with switching contacts and display Application Food & pharma CIP/SIP systems Machine and system construction Air conditioning and

More information

Energy-saving motors (ESM)

Energy-saving motors (ESM) Energy-saving motors (ESM) Technology Accessories EC-SYSTEMS ESM General information K series Q-motor EC axial EC axial fans A series fans Energy-saving motors (ESM) 316 Air performance curves 3 Energy-saving

More information

Adjustable speed for opening and closing Possibility to set different speed levels for opening and closing.

Adjustable speed for opening and closing Possibility to set different speed levels for opening and closing. NICE ERA INN XS THE NICE ERA INN RANGE IS NOW WIDER WITH THE XS TUBULAR MOTORS LINE, THE VERSATILE AND SILENT SOLUTION FOR THE AUTOMATION OF SMALLER INTERIOR BLINDS ERA INN EDGE XS DC RADIO 24 Vdc Tubular

More information

Microswitches MK series

Microswitches MK series Microswitches MK series Microswitches of MK series have been developed in order to add new features to traditional and tested microswitches of Pizzato Elettrica. These products have been designed with

More information

Technical Description Edition 2007 Mounting, maintenance and repair of propshafts with flanged universal joints

Technical Description Edition 2007 Mounting, maintenance and repair of propshafts with flanged universal joints Technical Description Edition 2007 Mounting, maintenance and repair of propshafts with flanged universal joints 1. Recommendations Assembly, disassembly, maintenance and repair of propshafts should be

More information

with electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE

with electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE with electric and pneumatic actuators Stop valve in straightway form DN 300-500 ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE Electric multiturn actuator capable of high closing pressures Enclosure

More information

Electromagnetic clutch-brake combinations INTORQ

Electromagnetic clutch-brake combinations INTORQ Electromagnetic clutch-brake combinations INTORQ 14.800 14.867 7.5 120 Nm setting the standard 2 CBC en 5/2005 Contents Clutch-brake combinations Product information 4 Type code 6 Design selection 8 Overview

More information

Brake Chopper BC BC 4.1. Instruction and Operation Manual

Brake Chopper BC BC 4.1. Instruction and Operation Manual Brake Chopper BC 2.1 - BC 4.1 Instruction and Operation Manual Caution: There is always a risk involved in the handling of electrical machinery! Therefore mounting and maintenance should only be done by

More information

S826, S926 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en

S826, S926 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en 2 Snap-action switches S826, S26 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en 2 Snap-action switches S826 Series Dual changeover switches with positive

More information

Flexible Couplings BIPEX Series

Flexible Couplings BIPEX Series Siemens AG 2008 Flexible Couplings BIPEX Series /2 Overview /2 Benefits /2 Application /3 Design /4 Technical data /5 Type BWN /5 Selection and ordering data /6 Type BWT /6 Selection and ordering data

More information

TS 5 Transfer System Version 2.0

TS 5 Transfer System Version 2.0 Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service TS Transfer System Version.0 The Drive & Control Company 0 Bosch Rexroth AG TS.0 3 0 30 (00. Symbols No.

More information

Replacement cartridge filter

Replacement cartridge filter Replacement cartridge filter RE 426/0. /2 Type 7 SL 0 to 260; 7 SLS 90 to 260; SL 0 to 80 D Size 7 SL: 0 to 260 7 SLS: 90 to 260 SL: 0 to 80 D Nominal pressure 7 and/or bar Port up to G /4, SAE /2 (000

More information

Table of contents. Three-phase asynchronous motors DA

Table of contents. Three-phase asynchronous motors DA be in motion be in motion AC Asynchronous Motors DA 100-280 Table of contents 1. Three-phase asynchronous motor DA 100-280... 3 1.1. General technical data... 3 1.2. Ratings definition for ventilated

More information

Free space car height car height. height 340 (330) height 360 (340) car height car height

Free space car height car height. height 340 (330) height 360 (340) car height car height KLAUS Multiparking GmbH Hermann-Krum-Straße 2 D-8831 Aitrach Fon +4 (0 ) 6 08-0 Fax +4 (0 ) 6 08-88 info@multiparking.com www.multiparking.com PRODUCT DATA 1 2 2000 kg / 0 kg Page 6 Garage (basement garage)

More information

Rotary limit switches FCR FGR series

Rotary limit switches FCR FGR series Rotary limit switches FCR FGR series Rotary control switches with 00mm rods from up to positions. Control switches with rotary gear from up to 00 rpm with or micro switches. 0 Rotary limit switches FCR

More information

SCHMIDT-KUPPLUNG GmbH

SCHMIDT-KUPPLUNG GmbH Loewe GK About us Many years of experience For 50 years, we have been advising machine manufacturers as partners for compact coupling systems. Our experience in power transmission has given us extensive

More information

EIPC3 EIPC5 INTERNAL GEAR PUMPS EIPC5 NEW!

EIPC3 EIPC5 INTERNAL GEAR PUMPS EIPC5 NEW! EIPC3 EIPC5 INTERNAL GEAR PUMPS new Generation EIPC new technology up to 320 bar industrial version aluminium housing noise-optimized multi-flow-pumps with common suction port NEW! EIPC5 Internal gear

More information

/2017. Hollow piston cylinder, single-acting spring clamping hydraulic unclamping

/2017. Hollow piston cylinder, single-acting spring clamping hydraulic unclamping , single-acting spring clamping hydraulic unclamping Applications: un-pressurized long-term clamping of dies or fixtures on press beds and rams when the space available is limited T-bolt Spring clamping

More information

WIRE ROPE HOISTS & TROLLEYS. XM Series MISIA HOISTS & LIFTING SOLUTIONS

WIRE ROPE HOISTS & TROLLEYS. XM Series MISIA HOISTS & LIFTING SOLUTIONS WIRE ROPE HOISTS & TROLLEYS XM Series MISIA HOISTS & LIFTING SOLUTIONS INDEX MISIA THE COMPANY 2 QUALITY AND CERTIFICATIONS 4 MISIA WIRE ROPE HOISTS XM SERIES 6 Standard configurations 8 Components 10

More information

ATEX LABELLING FOR MOTORS AND GEAR UNITS

ATEX LABELLING FOR MOTORS AND GEAR UNITS ATEX LABELLING FOR MOTORS AND GEAR UNITS EN ATEX INFORMATION GAS AND DUST COMPLETE DRIVE SOLUTIONS FROM A SINGLE SOURCE RELIABLE n Reliable products n Coordinated components n NORD's own development and

More information

Type. 437 Safety Relief Valves spring loaded

Type. 437 Safety Relief Valves spring loaded Type Packed knob H4 437 Safety Relief Valves spring loaded Packed knob H4 Flanged connection Cap H2 Contents Chapter/Page Materials Available designs 01/02 Available designs materials 01/03 How to order

More information

Electric Actuators Type SAM Linear Actuator

Electric Actuators Type SAM Linear Actuator Electric Actuators Type SAM Linear Actuator Application Electric actuators designed for control valves used in industrial applications, particularly suitable for attachment to Series 240, 250 and 280 Valves

More information

PTEX extruder pumps Pneumatic extruder pump for drums of grease up to NLGI grade 2

PTEX extruder pumps Pneumatic extruder pump for drums of grease up to NLGI grade 2 1-4009-EN PTEX extruder pumps Pneumatic extruder pump for drums of grease up to NLGI grade 2 The PTEX extruder pumps are pneumatically actuated pumps designed to deliver lubricant under pressure to lubrication

More information

Operating Instructions

Operating Instructions Operating Instructions Ex UPS Combination of > 8265/5 GUBox control panel > 8316 battery box Contents 1 Contents 1 Contents 2 2 General Information 2 3 Safety Instructions 2 4 Conformity to standards 3

More information

pag. 5 pag. 8 Who we are: evolution sectors pag. 11 pag. 14 Designation pag. 27 Versions pag. 18 pag. 31 Accessories and Options pag.

pag. 5 pag. 8 Who we are: evolution sectors pag. 11 pag. 14 Designation pag. 27 Versions pag. 18 pag. 31 Accessories and Options pag. 1 2 1 pag. 4 2 pag. 5 3 pag. 7 4 pag. 8 Who we are: evolution Introduction Industry sectors Plus & Benefit 5 pag. 10 6 pag. 11 7 pag. 12 8 pag. 14 Designation Compliance Directives and Standards Operating

More information

For air dampers and control valves of oil or gas burners

For air dampers and control valves of oil or gas burners 7 813 Actuators For air dampers and control valves of oil or gas burners SQM33... Electromotoric actuators Torques: - SQM33.4 up to 1.2 Nm nominal output torque - SQM33.5 up to 3 Nm nominal output torque

More information

Legal notice. FIBRO GmbH. This document has been created by. FIBRO GmbH. Rotary Table Division. Postfach Weinsberg, Germany

Legal notice. FIBRO GmbH. This document has been created by. FIBRO GmbH. Rotary Table Division. Postfach Weinsberg, Germany [Enter text] 33 Legal notice This document has been created by FIBRO GmbH Rotary Table Division Postfach 11 20 74183 Weinsberg, Germany Weidachstraße 41-43 T +49(0)7134 / 73 0 F +49(0)7134 / 73 218 info@fibro.de

More information

Electric pump EP-1. Electric pump with 1.9 kg reservoir:

Electric pump EP-1. Electric pump with 1.9 kg reservoir: The BEKA-MA central lubrication pump model EP-1 is electrically actuated and has up to a maximum of independently operating lubricant outlets. A separate pump element is required for each outlet. Three

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings

More information

Electromagnetic clutches and brakes INTORQ and INTORQ

Electromagnetic clutches and brakes INTORQ and INTORQ Electromagnetic clutches and brakes INTORQ 14.105 and INTORQ 14.115 7.5 480 Nm setting the standard Product information INTORQ electromagnetic clutches and brakes transmit the drive torque or braking torque

More information

OPERATING INSTRUCTIONS (Translation) Hoisting crane

OPERATING INSTRUCTIONS (Translation) Hoisting crane 1. User Groups Duties Operator Operation, visual inspection Specialist personnel OPERATING INSTRUCTIONS (Translation) Hoisting crane Type 4781.0,25 Assembly, disassembly, repair, maintenance Tests GB Qualifications

More information

Versions of Prime Drilling HDD-Rigs PD 30/18 RP - PD 100/64 RP

Versions of Prime Drilling HDD-Rigs PD 30/18 RP - PD 100/64 RP Versions of Prime Drilling HDD-Rigs PD 30/18 RP - PD 100/64 RP HDD-RIGS 300 kn - 1,000 kn pull force (30 t - 100 t) 18 knm - 64 knm torque PRIME DRILLING operates worldwide and is specialized in Horizontal

More information

UNIVERSAL 320/320 R Benchtop Centrifuges classic/cooled

UNIVERSAL 320/320 R Benchtop Centrifuges classic/cooled UNIVERSAL 320/320 R Benchtop Centrifuges classic/cooled UNIVERSAL 320/320 R PERFORMANCE There are good reasons why we have called these centrifuges UNIVERSAL. Their excellent performance and comprehensive

More information

Data Sheet WÖHR PARKING PLATFORM 501

Data Sheet WÖHR PARKING PLATFORM 501 Data Sheet WÖHR PARKING PLATFORM 501 For lateral shunting. Suitable for condominium and office buildings. Dimensions in cm. Load per parking place max. 2000 kg (max. wheel load 500 kg). 500 500 90 *safety

More information

Control Gate Valve with stepper motor actuator

Control Gate Valve with stepper motor actuator Control Gate Valve with stepper motor actuator This manual is valid for the valve ordering numbers: 64036-.E52 and 64040-.E52 The respective product identification is given on each valve in the following

More information

RS/1 SERIES. One Stage Gas Burners RS 34/1 MZ RS 44/1 MZ kw kw GAS

RS/1 SERIES. One Stage Gas Burners RS 34/1 MZ RS 44/1 MZ kw kw GAS The RS/1 series of burners covers a firing range from 70 to 550 kw, and they have been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic oil boilers.

More information

ARI-FABA -ANSI LongLife Stop valve with bellows seal

ARI-FABA -ANSI LongLife Stop valve with bellows seal Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053

More information

T e c h n o l o g y f o r T h e W e l d e r s W o r l d. TIG. Product Catalogue 3.1 / V1.

T e c h n o l o g y f o r T h e W e l d e r s W o r l d. TIG. Product Catalogue 3.1 / V1. T e c h n o l o g y f o r T h e W e l d e r s W o r l d. TIG Product Catalogue 3.1 / V1 www.binzel-abicor.com Content TIG Welding Torches TIg Welding Torches ABITIg grip air and liquid cooled Page 04

More information

TUBUS-Series Type TA

TUBUS-Series Type TA TUBUS-Series Type TA Profile Damper Axial Damping 84 The profile damper type TA from the innovative ACE TUBUS series is a maintenancefree, self-contained damping element made from a special Co-Polyester

More information

TUBUS-Series Type TA

TUBUS-Series Type TA TUBUS-Series Type TA Profile Damper Axial Damping The profile damper type TA from the innovative ACE TUBUS series is a maintenancefree, self-contained damping element made from a special Co-Polyester Elastomer.

More information

Pressure Transmitter JUMO dtrans p30 Type

Pressure Transmitter JUMO dtrans p30 Type Data Sheet 40466 Page 1/6 Pressure Transmitter JUMO dtrans p0 Type 40466 General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The

More information

Dewatering Submersible sewage pumps

Dewatering Submersible sewage pumps Series description Wilo-Drain TP 80/TP 100 Equipment/function Thermal motor monitoring Leakage detection in the motor ATEX-certified Sheath current cooling Materials Pump housing: PUR Impeller: PUR Shaft:

More information

Series S847 Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.

Series S847 Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47. Snap-action switches Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.en Snap-action switches, S847 Series Dual changeover

More information

TUBUS-Series Type TA

TUBUS-Series Type TA TUBUS-Series Type TA Profi le Damper Axial Damping 76 The profile damper type TA from the innovative ACE TUBUS series is a maintenance-free, self-contained damping element made from a special Co-Polyester

More information

cyber force motors linear actuators

cyber force motors linear actuators cyber motor cyber force motors linear actuators reliable compact precise Your Applications WITTENSTEIN Products that know no limits Joining Electromechanical cylinder with high accuracy for mating and

More information

Mounting instructions Directions for use MAKROLUX. Halogen-spot lamp for consulting room and hospital

Mounting instructions Directions for use MAKROLUX. Halogen-spot lamp for consulting room and hospital Mounting instructions Directions for use MAKROLUX Halogen-spot lamp for consulting room and hospital Stand model with five-feet base, design without heat protection filter 1100 1012 00 Stand model with

More information

Fire damper ETPR. Specifications. Product code example Fire damper ETPR

Fire damper ETPR. Specifications. Product code example Fire damper ETPR Fire damper ETPR ETPR fire damper is CE marked based on product standard EN 15650:2010 and tested according to the test standard EN 1366-2. ETPR meets the requirements of fire class EI 60 S / EI 90 S.

More information

Accessories smart additions for efficiency and intelligent performance

Accessories smart additions for efficiency and intelligent performance smart additions for efficiency and intelligent performance Metal bellows couplings Perfectionists you can count on Metal bellows couplings are designed for the highest requirements in servo drive technology.

More information

Profi le rail guides LLR

Profi le rail guides LLR Profi le rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout

More information

CONA -control Monitoring system for steam traps

CONA -control Monitoring system for steam traps CONA -control - Monitoring system for steam traps CONA -control Monitoring system for steam traps Central status indication External test chamber Bolt-on test chamber Inclusive: - AS-i-Master - Power supply

More information

Hose pumps SP 04. Otto Huber GmbH Heubergstraße 2 D Böttingen. integrated pump. exterior pump. laboratory pump

Hose pumps SP 04. Otto Huber GmbH Heubergstraße 2 D Böttingen. integrated pump. exterior pump. laboratory pump Hose pumps SP 04 integrated pump exterior pump laboratory pump Otto Huber GmbH Heubergstraße 2 D-78583 Böttingen Phone: Fax: E-Mail: Internet: +49(0)7429/9312-0 +49(0)7429/9312-50 info@otto-huber.de www.otto-huber.de

More information

Accessories: Dust collector. Slope winch. Bit grinder Application: Water wells

Accessories: Dust collector. Slope winch. Bit grinder Application: Water wells Deltabase 430 - DTH drill rig Deltabase 430 - DTH drill rig Deltabase 430 is a compact, lightweight drill rig especially designed for DTH work on modern job sites. The DB 430 is optimised to drill 4 to

More information

Electric Actuators Maximum in-lbs

Electric Actuators Maximum in-lbs Maximum 14040 in-lbs NEMA 4, 4X, 7 ER- Series Features ISO / DIN valve interface Mounting in any position Thermal overload protection (AC & DC except 12 VDC) Friction brake (standard for AC motors except

More information

Operating instructions

Operating instructions Operating instructions Type TEKA filtoo TEKA Absaug- und Entsorgungstechnologie GmbH Industriestraße 13 D-46342 Velen Postfach 1137 D-46334 Velen Tel.: +49 (0) 2863 9282-0 Fax: +49 (0) 2863 9282-72 E-Mail:

More information

HOFFMANN Fördertechnik GmbH Wurzen

HOFFMANN Fördertechnik GmbH Wurzen HOFFMA Fördertechnik GmbH Wurzen Innovative electric chain hoists Milestones on the way to success 95 954 955 956 The initial LIFTKET design has introduced the change to low headroom hoists by placing

More information

ROTARY MOTION CONTROL

ROTARY MOTION CONTROL ROTARY MOTION ONTROL Technical Data Sheet Mechanical Torque Limiter The trend in industry is to design and incorporate more automation into production processes. Machines are becoming more accurate, requiring

More information

Orbital Motors OMEW Standard and with Low Speed Option

Orbital Motors OMEW Standard and with Low Speed Option MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMEW Standard and with Low Speed Option powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev October 2014 Changed

More information