Hydrofluoric Acid Processing Valves

Transcription

1 Hydrofluoric Acid Processing Valves Catalog_0416.indd 1 4/16/09 10:44:23 PM

2 Catalog_0416.indd 2 4/16/09 10:44:28 PM

3 Hydrofluoric Acid Processing Valves Table of Contents Introduction 1 Company Overview 2 HF Alkylation 3 Key Points 5 Gate Valves 6 Globe Valves 10 Check Valves 14 Special Features 17 Technical Support 27 Valves Illustration Index Gate Valves Small Bore 6 Small Bore with Stem Grease Injector 7 Large Bore 8 Large Bore with Stem Grease Injector 9 Globe Valves Small Bore 10 Small Bore with Stem Grease Injector 11 Large Bore 12 Large Bore with Stem Grease Injector 13 Check Valves Small Bore Swing 14 Small Bore Lift 15 Large Bore Swing Catalog_0416.indd 3 4/16/09 10:44:30 PM

4 Catalog_0416.indd 4 4/16/09 10:44:31 PM

5 PetrolValves is a leading manufacturer of valves for the oil and gas industry. Formed in 1956, PetrolValves is privately held and has grown to a medium size company with sales, services and manufacturing facilities throughout the world. We have a direct presence in the United States, Norway, United Kingdom, Italy, Algeria, Saudi Arabia and Singapore. Our continuous investment in the development of new technology has resulted in the growth and ongoing success of our company. PetrolValves' line of production includes some of the most sophisticated valves and actuators in the world. Although we also supply commodity valves, PetrolValves' strategy has always been focused on the development of custom or niche products designed according to customers specifi c requirements. Some of our clients include: Aramco, BP, Chevron, Conocophillips, ExxonMobil, NASA, PDVSA, Pemex, Petrobras, Repsol, Shell and Statoil. By developing exclusive products, we have distinguished ourselves and gained prominence within this competitive industry. Our line of production serves the following industries: Oil and Gas Production and Transportation - Onshore, Offshore and Subsea; Refi ning, Petrochemical and Power Generation. Our areas of downstream specialization include: Cryogenic (LNG), Hydrofluoric Acid (Alkylation) and Hydrogen processes. The types of valves we produce for the above services include: ball, gate, globe, check, axial fl ow check, choke through conduit slab and expanding type gates. Introduction Catalog_0416.indd Sec2:3 4/16/09 10:44:32 PM

6 Company Overview Head Office and Manufacturing Plan in Castellanza - Italy Head Office & Manufacturing Plant PetrolValves S.r.l. Viale G. Borri, Castellanza (VA), ITALY tel: fax: sales@petrolvalves.it Western Hemisphere PetrolValves LLC (USA) 6000 W. Sam Houston Parkway North Houston, Texas 77041, USA tel: fax: petrolvalves@petrolvalves.com Europe PetrolValves (G.B.) Ltd Church Street Hampton, Middlesex TW12 2EG, England, UK tel: fax: pvgb@petrolvalves.co.uk PetrolValves (G.B.) Ltd - Aberdeen 20 Rubislaw Terrace Aberdeen AB10 1XE, Scotland, UK tel: fax: general@petrolvalvesabd.co.uk PetrolValves A.S. (Norway) Luramyrveien 57, N-4313 P.O. Box 1153 Lura, N-4391 Sandnes, Norway tel: fax: mail@petrolvalves.no Africa & Middle East TKA - PetrolValves Algeria N 108 Lotissement Saidoun Mohamed Kouba, Alger, Algeria tel: fax: tka-petrolvalves-alger@petrolvalves.it Saudi PetrolValves Co. Ltd Dammam Second Industrial City P.O. Box 1280 Al Khobar 31952, Kingdom of Saudi Arabia tel: fax: saudi-petrolvalves@petrolvalves.it Central & East Asia PetrolValves Singapore Block 86, Marine Parade Central, , Singapore tel: fax: sales@petrolvalves.sg In addition to the PV owned Subsidiaries, PetrolValves has developed a worldwide network of Alliance Facilities. 2 Company Overview Catalog_0416.indd Sec2:4 4/16/09 10:44:35 PM

7 HF Alkylation PetrolValves l began producing speciality valves destined d for the HF Alkylation industry and for the processing of Hydrofluoric Acid in The engineering, design, production, manufacturing and quality control departments have worked, in conjunction with the industries innovators and technology licensors, in a concerted effort to continuously improve the performance and reliability of our HF Valve. This evolution has been achieved by improving design features and machining standards while upgrading the selection of material utilized to meet or exceed applicable codes (API and ANSI) and customer's requirements. This, combined with an in-line quality control system, has resulted in PetrolValves being the leading supplier of valves for HF application worldwide. PetrolValves is the only European manufacturer that is listed by all HF Alkylation licensors for all sizes and classes. PetrolValves has long been approved by both Phillips and UOP. However, now that UOP has acquired Phillips HF Technology and intends to consolidate the technology, we prominently feature the UOP standards in our catalog. Please be advised that PetrolValves continues to supply a complete range of Phillips valves and has worldwide capability to perform full valve reconditioning during HF unit shutdown. PetrolValves extends a full guarantee on the performance of its valves for Alkylation and HF acid production and processing Catalog_0416.indd Sec2:5 4/16/09 10:44:38 PM

8 Catalog_0416.indd Sec2:6 4/16/09 10:44:40 PM

9 Key Points Enhanced HF Valve Design Features By working with end users, the technology licenser, and following API and ANSI standards, PetrolValves has enhanced the HF Valve design in the following ways: Increased Body and Bonnet Wall Thickness - Offers Substantial Increase of Corrosion Allowance Oversized Bonnet Bolting and Gasket Seal Faces - Increases Integrity Renewable Seat Rings threaded into Monel overlaid pockets - Simplifies Maintenance Renewable Seal Welded Seats options: Proprietary single and double seal weld processes ensure integrity in the heat affected zone and provide long term solutions extending operation between turnarounds while maintaining integrity Monel Stuffing Box Sleeve options with Anti-Blow Out Design - Reduces Corrosion and Extends Service Life Gland Packing System, that conforms to applicable International Standards The periphery of HF valve flanges, bonnet flanges included, are painted with VOC compliance HF indicating paint. Complete Fire-Safe Design Special Sizes available Design which Allows for Simple, Low-Cost Maintenance and Extends Life Extended Life Expectancy HF Material Selection All trim parts are constructed in solid Monel materials and only K500 Monel stems are used for increased strength to minimize stem bending. Combining Monel 400 seat rings with K500 solid forged Monel wedges eliminates the risk of galling between the critical sealing surfaces to ensure long-term sealing performance. Monel overlayed carbon steel is not utilized as a base element in primary closure member components, such as the wedge or seat rings. All Monel is procured from leading suppliers in the EU and US. HF Valve Testing All HF valves are tested at each stage of production. Castings, forged bodies and bonnets, and wedge parts are exposed to RT, UT and visual testing procedures to verify pressure boundary integrity and to ensure that the items are suitable for production. All Monel trim materials are spot tested with a nitric acid solution prior to assembly. Finished HF valves are shell tested with Helium. Further pressure testing is executed in-line according to API 598 standards using Kerosene and compressed air for all seat seal and shell tests. HF Valve Serviceability PetrolValves has designed all valve components to be renewable and to be readily available as spare parts. In addition, HF valves have been designed for easy disassembly and maintenance. Valve seats can be renewed while valve body remains in the pipeline (with threaded designs options only). Monel overlays in the seat pocket areas extend the life expectancy of the product while offering unequalled performance between turnarounds. Since the effect of corrosion is greatly reduced in the critical areas, standard replacement parts can be utilized during the life of the valve. PetrolValves offers complete HF valve the service and maintenance both on-site and at PetrolValves service facilities. Our scope of activities encompasses the service and reconditioning associated with minor and major shutdowns. Please contact the nearest PetrolValves office (see back cover) to assist you in your service, maintenance or reconditioning needs. All work comes with a manufacture warranty and is consistent with technology licensor requirements. Key Points Catalog_0416.indd Sec2:7 4/16/09 10:44:42 PM

10 Gate Valves per API 602 Small Bore Gate Valves Grease nipple for yoke sleeve lubrication reduces wear and operating torques. Used for open/close media flow control, the gate valve is the valve of choice for primary isolation double block and bleed. PetrolValves manufactures HF acid gate valves with a number of available options to meet any specific requirements (see special features section). The PetrolValves gate valve is ideal in applications where the valve is exposed to fire situations internally (through the pipeline) and externally (atmospheric), offering reliable isolation if exposed to fire. Gate valves can be operated by hand wheel, gear operated, or actuated depending on specific requirements. Actuated or gear operated packages available. Rising stem for positive open/close position. Large diameter hand wheel. Easy operation opening and closing. Monel K500 Stem, with integral backseat seal, offers strength and durability in HF service. Yoke bush in Ni-Resist or Gunmetal. Self centering two piece Monel 400 Gland with A105 Gland Flange. Monel 400 Stuffing Box Sleeve option available. Anti blow out design with integral back seat bush. Designed to accommodate additional packing rings if required. Double seal welded. Body/Bonnet materials: WCB/LF2 carbon steel or full Monel. Seat rings in Monel 400 swagged into body. PTFE insert option for seat rings. Stem: Monel K500 exceeds API 602 minimum stem diameter limitations. Gland bolting A194 B7M. Gland Nuts A193 2HM. Combination Graphitic Rings gland packing Body Bonnet bolting/nuts. A193 B7M/A194 2HM. Body Bonnet Gasket sp/w Monel/Graphite Solid Monel K500 Wedge. TSHP Teflon insert option available. End connections: Socket weld. Raised face flange options available. 6 Gate Valves PetrolValves Catalog_0416.indd Sec2:8 4/16/09 10:44:43 PM

11 Gate Valves per API 602 Small Bore - with stem grease injector Grease nipple for yoke sleeve lubrication reduces wear and operating torques. Actuated or gear operated packages available. Rising stem for positive open/close position. Large diameter hand wheel. Easy operation when opening and closing. Gate Valves Monel K500 Stem, with integral backseat seal, offers strength and durability in HF service. Yoke bush in Gunmetal. Self centering two piece Monel 400 Gland with A105 Gland Flange. Stem: Monel K500 exceeds API 602 minimum stem diameter limitations. Monel 400 Stuffing Box Sleeve option available. Anti blow out design with integral back seat bush. Designed to accommodate additional packing rings if required. Double seal welded. Lantern ring in Monel 400 with Combination Graphitic Gland packing rings. Gland bolting A194 B7M. Gland Nuts A193 2HM. Monel 400 Grease Injector with double ball isolation option available. Polymel 410 primed at factory. Body/Bonnet materials: WCB/A105 carbon steel or full Monel. Seat rings in Monel 400 swagged into body. PTFE insert option for seat rings. Seal Welded Seat Ring option available (NS 1 1 /2") Body Bonnet bolting/nuts. A193 B7M/A194 2HM. Body Bonnet Gasket sp/w Monel/Graphite or Monel Ring Joint. Solid Monel K500 Wedge. End connections: Socket weld. Raised face flange options available. Monel overlayed seat pocket option available Hydrofluoric Acid Processing Valves Gate Valves Catalog_0416.indd Sec2:9 4/16/09 10:44:45 PM

12 Gate Valves per API 600 Large Bore Gate Valves Grease nipple for yoke sleeve lubrication reduces wear and operating torques. Actuated or gear operated packages available. Rising stem for positive open/close position. Large diameter hand wheel. Easy operation opening and closing. Monel K500 Stem, with integral backseat seal, offers strength and durability in HF service. Yoke bush in Gunmetal. Stem: Monel K500 exceeds API 600 minimum stem diameter limitations. Self centering two piece Monel 400 Gland with A105 Gland Flange. Gland bolting A194 B7M. Gland Nuts A193 2HM. Combination Graphitic Gland packing. Body Bonnet bolting/nuts A194 B7M/A193 2HM. Body/Bonnet materials: WCB cast carbon steel, A105/LF2 forged carbon steel or full Monel M35/1. Seat rings in solid Monel 400 screwed into Monel overlaid seat pockets or double seal welded to body pockets Renewable Monel 400 Backseat Bush. Monel 400 Stuffing Box Sleeve option available. Anti blow out design with integral back seat bush. Designed to accommodate additional packing rings if required. Double seal welded. Body Bonnet Gasket sp/w Monel/Graphite. Solid Monel Wedge. TSHP Teflon insert option available. End connections: Raised face flange 125/250 AARH or smooth finished. Ring joint type gasket option available. 8 Gate Valves PetrolValves Catalog_0416.indd Sec2:10 4/16/09 10:44:48 PM

13 Gate Valves per API 600 Large Bore - with stem grease injector Grease nipple for yoke sleeve lubrication reduces wear and operating torques. Monel K500 Stem, with integral backseat seal, offers strength and durability in HF service. Actuated or gear operated packages available. Rising stem for positive open/close position. Large diameter hand wheel. Easy operation opening and closing. Yoke bush in Gunmetal. Gate Valves Stem: Monel K500 exceeds API 600 minimum stem diameter limitations. Self centering two piece Monel 400 Gland with A105 Gland Flange. Monel 400 Grease injector with double ball isolation. Body/Bonnet materials: WCB cast carbon steel, A105/LF2 forged carbon steel or full Monel M35/1. Seat rings in solid Monel 400 screwed into Monel overlaid seat pockets or double seal welded to body pockets. Seat seals grease injectors Monel 400 with double ball isolation. See options. Gland bolting A194 B7M. Gland Nuts A193 2HM. Lantern ring in Monel 400 with combination Graphitic Gland packing. Renewable Monel 400 backseat bush. Monel 400 Stuffing Box Sleeve option available. Anti blow out design with integral backseat bush. Designed to accommodate additional packing rings if required. Double seal welded. Body Bonnet bolting/nuts. A193 B7M/A194 2HM. Body Bonnet Gasket Monel 400 ring joint or sp/w Monel/Graphite. Solid Monel Wedge. TSHP Teflon insert option available. End connections: Raised face flange 125/250 AARH or smooth finished. Ring joint type option available. Hydrofluoric Acid Processing Valves Gate Valves Catalog_0416.indd Sec2:11 4/16/09 10:44:50 PM

14 Globe Valves Small Bore Globe Valves Grease nipple for yoke sleeve lubrication reduces wear and operating torques. Monel K500 Stem, with integral backseat seal, offers strength and durability in HF service. The globe valve is utilized as a throttling device to regulate pressure, flow, temperature or level control. At 10% or greater open position the valve permits throttling. The PetrolValves globe valve is ideal in applications where the valve is exposed to fire situations, offering reliable isolation to fire. Globe valves can be operated by hand wheel, gear operated, or actuated depending on specific requirements. Actuated or gear operated packages available. Rising stem for positive open/close position. Large diameter hand wheel. Easy operation opening and closing. Yoke bush in Gunmetal or Ni Resist. Self centering two piece Monel 400 Gland with A105 Gland Flange. Monel 400 Stuffing Box Sleeve option available. Anti blow out design with integral back seat bush. Designed to accommodate additional packing rings if required. Double seal welded. Body/Bonnet materials: WCB cast carbon steel, A105/LF2 forged carbon steel or full Monel M35/1. Seat Rings in Monel 400 threaded into body. End connections: Socket weld or raised face flange options available. Gland bolting A194 B7M. Gland Nuts A193 2HM. Combination Graphitic Gland packing. Body Bonnet bolting/nuts. A193 B7M/A194 2HM. Stem: Monel K500 Body Bonnet Gasket sp/w Monel/Graphite. Solid Monel K500 disc. Teflon insert option available. Monel overlaid seat pocket available. 10 Globe Valves PetrolValves Catalog_0416.indd Sec2:12 4/16/09 10:44:52 PM

15 Globe Valves Small Bore - with stem grease injector Grease nipple for yoke sleeve lubrication reduces wear and operating torques. Monel K500 Stem, with integral backseat seal, offers strength and durability in HF service. Actuated or gear operated packages available. Rising stem for positive open/close position. Large diameter hand wheel. Easy operation opening and closing. Yoke bush in Gunmetal. Globe Valves Self centering two piece Monel 400 Gland with A105 Gland Flange. Gland bolting A194 B7M. Gland Nuts A193 2HM. Monel 400 Stuffing Box Sleeve option available. Anti blow out design with integral back seat bush. Designed to accommodate additional packing rings if required. Double seal welded. Lantern ring in Monel 400 with combination Graphitic Gland packing. Stem: Monel K500 Monel 400 grease injector with double ball isolation option available. Polymel 410 primed at factory. Body Bonnet bolting/nuts. A193 B7M/A194 2HM. Body/Bonnet materials: WCB cast carbon steel, A 105/LF2 forged carbon steel or full Monel M35/1. Body Bonnet Gasket sp/w Monel/Graphite or Monel Ring Joint. Seat rings in Monel 400 threaded into body. End connections: Socket weld. Raised face flange or ring joint type flange options available. Solid Monel K500 Disc. Teflon insert option available. Seat seals grease injectors Monel 400 with double ball isolation option available. Monel overlaid seat pocket option available. Hydrofluoric Acid Processing Valves Globe Valves Catalog_0416.indd Sec2:13 4/16/09 10:44:54 PM

16 Globe Valves Large Bore Globe Valves Grease nipple for yoke sleeve lubrication reduces wear and operating torques. Monel K500 Stem, with integral backseat seal, offers strength and durability in HF service. Actuated or gear operated packages available. Rising stem for positive open/close position. Large diameter hand wheel. Easy operation opening and closing. Yoke bush in Gunmetal. Self centering two piece Monel 400 Gland with A105 Gland Flange. Gland bolting A194 B7M. Gland Nuts A193 2HM. Body Bonnet bolting/nuts. A194 B7M/A193 2HM. Body/Bonnet materials: WCB cast carbon steel, A105/LF2 forged carbon steel or full Monel M35/1. Combination Graphite Gland packing. Body Bonnet Gasket sp/w Monel/Graphite. Seat rings in Monel 400 screwed into Monel welding overlaid seat pocket. Renewable Monel 400 backseat bush. Monel 400 Stuffing Box Sleeve option available. End connections: Raised face flange. 125/250 AARH or smooth finished. Ring joint type option available. Stem: Monel K500 Solid Monel K500 Disc. 12 Globe Valves PetrolValves Catalog_0416.indd Sec2:14 4/16/09 10:44:55 PM

17 Globe Valves Large Bore - with stem grease injector Grease nipple for yoke sleeve lubrication reduces wear and operating torques. Monel K500 Stem, with integral backseat seal, offers strength and durability in HF service. Actuated or gear operated packages available. Rising stem for positive open/close position. Large diameter hand wheel. Easy operation opening and closing. Yoke bush in Gunmetal. Globe Valves Self centering two piece Monel 400 Gland with A105 Gland Flange. Monel 400 grease injector with double ball isolation. Body/Bonnet materials: WCB cast carbon steel, A105/LF2 forged carbon steel or full Monel M35/1. Seat ring in Monel 400 screwed into Monel welding overlaid seat pocket. End connections: Raised face flange 125/250. AARH or smooth finished Seat Seal Grease Injectors Monel 400 with double ball isolation option available. Gland bolting A194 B7M. Gland nuts A193 2HM. Lantern ring in Monel 400 with combination Graphite Gland packing. Body Bonnet bolting/nuts. A194 B7M/A193 2HM. Body Bonnet Gasket Monel 400 ring joint or Monel/Graphite sp/w. Renewable Monel 400 backseat bush. Monel 400 Stuffing Box Sleeve available. Anti blow out design with integral back seat bush. Designed to accommodate additional packing rings if required. Double seal welded. Stem: Monel K500 Solid Monel K500 Disc. Teflon insert option available. Hydrofluoric Acid Processing Valves Globe Valves Catalog_0416.indd Sec2:15 4/16/09 10:44:57 PM

18 Check Valves Small Bore Swing Check Valves Designed to prevent back flow, the PetrolValves swing check valve has the flexibility to be installed in a horizontal or vertical orientation where flow velocity conditions are light to medium. The swing check valve is ideal for regular duty or in stand-by conditions and will prevent re-circulation when the pump is out of service and the stand-by pump sets are discharging into a common header. The PetrolValves Check valve is ideal in applications where the valve is exposed to fire situations offering reliable isolation if exposed to fire. Body Bonnet bolting/nuts. A194 B7M/A193 2HM. Body Bonnet Gasket sp/w Monel/Graphite or Monel Ring Joint. Body/Bonnet materials: WCB cast carbon steel, A105/LF2 forged carbon steel or full Monel M35/1. Seat rings in Monel 400 swagged into body. Teflon insert option for seat ring. End connections: raised face flange 125/250 AARH or smooth finished. Monel 400 hinge, hinge pin, disc nut, washer and disc cotter pin. Solid Monel K500 Swing Disc. Socket weld ends options available. 14 Check Valves PetrolValves Catalog_0416.indd Sec2:16 4/16/09 10:45:00 PM

19 Check Valves Small Bore Lift Body Bonnet bolting/nuts. A194 B7M/A193 2HM. Check Valves Body Bonnet Gasket Monel 400 ring joint or Monel/Graphite spiral wound. Body/Bonnet materials: WCB cast carbon steel, A105/LF2 forged carbon steel or full Monel M35/1. K500 solid Monel disk. Seat ring in Monel 400 screwed into body. Monel welding overlay on seat pocket option available. End connections: socket weld. Raised face flange. 125/250 AARH or smooth finished option available. Hydrofluoric Acid Processing Valves Check Valves Catalog_0416.indd Sec2:17 4/16/09 10:45:02 PM

20 Check Valves Large Bore Swing Check Valves Seat rings in Monel 400 screwed into body. Monel welding overlaid seat pocket. Body Bonnet bolting/nuts. A194 B7M/A193 2HM. Body Bonnet Gasket Monel 400 ring joint or Monel/Graphite spiral wound. Body/Bonnet materials: WCB cast carbon steel, A105/LF2 forged carbon steel or full Monel. Monel 400 hinge, hinge pin, disc nut, washer and disc cotter pin. Solid Monel Swing Disc. End connections: raised face flange. 125/250 AARH or smooth finished. Ring joint type option available. Monel K500 Body plugs. 16 Check Valves PetrolValves Catalog_0416.indd Sec2:18 4/16/09 10:45:04 PM

21 Special Features Monel Overlaid Seat Pockets 18 Double Seal Welded Seat Rings 19 Tight Shut Off Gate Valves Small Bore Gate Valves 20 Large Bore Gate Valves 21 Monel 400 Stuffing Box Sleeve 22 Grease Injection System Grease Injector 23 Stem Grease Injector 24 Gate Valves -Seat Injection System 25 Globe Valves -Seat Injection System Catalog_0416.indd Sec2:19 4/16/09 10:45:06 PM

22 Globe/Check/Gate Valves Monel Overlaid Seat Pocket Globe/Check/Gate Valves Monel Overlay to Seat Pocket (Seat Execution Code: OP) PetrolValves has developed a technique for the overlay of Monel on Cast/Forged Carbon Steel. Our procedures have proven over the long-term to eliminate any risk of HF Acid attacking and cutting through the heat affected zone, effectively extending operating cycles between turnarounds while maintaining high integrity isolation capability. This offers a high performance long-term solution for seat pocket corrosion. Globe Valves Check Valves Gate Valves 18 Special Features PetrolValves Catalog_0416.indd Sec2:20 4/16/09 10:45:08 PM

23 Gate/Check Valves Double Seal Welded Seat Rings Double Seal Welding Monel Seat Rings (Seat Execution Code: PW) PetrolValves has developed a technique for (Monel) double seal welding of Monel seat rings to Cast/Forged Carbon Steel body pockets. Our procedures have been proven over the long-term to eliminate any risk of HF Acid attacking and cutting through the heat affected zone. This offers a high-performance long-term solution for seat pocket corrosion. Gate Valves Gate/Check Valves Check Valves Hydrofluoric Acid Processing Valves Special Features Catalog_0416.indd Sec2:21 4/16/09 10:45:12 PM

24 Small Bore Gate Valves Tight Shut Off Small Bore Gate Valves Teflon Seat Seal Inserts The Monel 400 Swaged seat ring with an integral Teflon insert, is fitted using PetrolValves unique retention system. Once fitted, it can be relied on to stay in place. As a primary seal, Teflon offers isolation integrity where bubble tight shut off is critical. Construction guarantees metal back-up to the soft insert, therefore the valves are firesafe. While the Teflon provides a dependable seal, the wedge life is extended as its wear ratio is reduced considerably. 20 Special Features PetrolValves Catalog_0416.indd Sec2:22 4/16/09 10:45:16 PM

25 Large Bore Gate Valves Tight Shut Off Tight Shut Off - High Performance, Seat Sealing System Where absolute bubble tight isolation is critical, TSHP offers unsurpassed integrity of design coupled with the capability to provide a tight shut off. The wedge is fitted with a Teflon insert leaving the seat as a solid Monel component. This design takes the Teflon seal outwith the direct flow dynamics of the media thereby protecting the insert. No retaining rings or cap bolts are required to retain the Teflon insert, which helps to extend the life of the wedge and seat ring components, by reducing wear on the seal faces. The PTFE insert is fitted using PetrolValves unique retention system. Welding Overlaid Seat Pocket Large Bore Gate Valves Double Seal Welded Seat Ring Hydrofluoric Acid Processing Valves Special Features Catalog_0416.indd Sec2:23 4/16/09 10:45:19 PM

26 Gate/Globe Valves Monel 400 Stuffing Box Sleeve Gate/Globe Valves Monel Stuffing Box Sleeves with Integrated Backseat Bush A one piece Monel 400 Sleeve, designed to fit into the backseat bush stuffing box bore, the Monel Stuffing Box Sleeve is double seal welded after installation and has an antiblowout feature. The sleeve provides a repair solution to corroded stuffing box bores and acts as an excellent corrosion control element in a critical area thereby extending the life of the valve using standard spare parts. The Monel Stuffing Box Sleeve can be easily replaced during the life cycle of the valve. Double seal welded. Monel Sleeve Bushing. Double seal welded. Monel 400 Stuffing Box Sleeve. Anti-blowout design. Integral backseat bush. 22 Special Features PetrolValves Catalog_0416.indd Sec2:24 4/16/09 10:45:22 PM

27 Gate/Globe Valves Grease Injector Housing and Housing head in solid Monel or Carbon Steel. Grease Injectors For all applications where emergency sealant or HF resistant grease injection is a requirement, PetrolValves uses the standardized construction shown below for all factory fitted grease injectors. The double ball isolation system is employed for both gland and seat seal grease applications, where integrity must be assured. PetrolValves only recommends Polymel 410 for sealant/lubrication suitability in HF Alkylation service. The body can be supplied either in Carbon Steel or solid Monel while the ball checks are always in Monel. Monel Ball Check. Monel Ball Check. Gate/Globe Valves Monel Ball Check. Monel Pin. Spring. Hydrofluoric Acid Processing Valves Special Features Catalog_0416.indd Sec2:25 4/16/09 10:45:25 PM

28 Gate/Globe Valves Stem Grease Injector Gate/Globe Valves Braided graphite packing ring. (Top & Bottom rings) Stem Grease Injector Grease Injector with double Monel 400 ball isolation feeds Polymel 410 into the lantern ring which ensures also grease distribution between the two packing sections. Die formed graphite packing. Lantern ring. Monel 400 Grease Injector. Braided graphite packing ring. Die formed graphite packing. 24 Special Features PetrolValves Catalog_0416.indd Sec2:26 4/16/09 10:45:27 PM

29 Gate Valves Seat Injection System Gate Valve Seat Seal Grease Injection System Detail Grease Injector with double Monel 400 ball isolation feeds Polymel 410 through the precision grease ducts in the body to the radial groove machined into the seat rings. This ensures even distribution of grease to the seat sealing surfaces of the wedge and seat seals. The Grease Injector is further detailed on page 23. Gate Valves Hydrofluoric Acid Processing Valves Special Features Catalog_0416.indd Sec2:27 4/16/09 10:45:29 PM

30 Globe Valves Seat Injection System Globe Valves Globe Valve Seat Seal Grease Injection System Detail Grease Injector with double Monel 400 ball isolation feeds Polymel 410 through the precision grease ducts in the body to the radial groove machined into the seat rings. This ensures even distribution of grease to the seat sealing surfaces of the wedge and seat seals. The Grease Injector is further detailed on page Special Features PetrolValves Catalog_0416.indd Sec1:3 4/16/09 10:45:31 PM

31 Technical Support PetrolValves offers clients world-wide technical assistance through a professional team of service engineers. Our multidisciplined specialists provide effective service in accordance with rigorous procedures developed by PetrolValves over the course of the company's long history. We understand the true meaning of service. We are committed to the continuous improvement of our systems to respond to the constantly evolving standards and heightened requirements of our industry. Quality service has always been and will remain, a significant priority for our company. Our dedicated field support department conducts service operations in the following primary areas: Maintenance & Operations of: 1. Valve refurbishment, remanufacture, modifications and repairs 2. Structured technical training on special products repair techniques and procedures 3. Pre-turnaround - walkthrough HF plant survey 4. Turnaround repair valves, inspection and supervision 5. Documentation generation/updating of all historical maintenance records on individual valve by valve basis 6. On-site service with local workshop in-line 7. In-house complete refurbishment works 8. Audits on preferred valve repair vendor facilities with status report 9. Selected refurbishing vendor training on repair 10. Unequalled Field Service capability through quality after sales care Catalog_0416.indd Sec1:4 4/16/09 10:45:33 PM

32 Technical Drawings Technical Drawings Technical Drawings Technical Drawings Technical Drawings Technical Drawings Technical Drawings Divider_0416.indd 1 4/16/09 8:56:01 PM

33 Divider_0416.indd 2 4/16/09 8:56:05 PM

34 HF Valves CLASS 800 VALVES Fig. No. Valve Type Class Nominal Size Page No. F 101 UHF 2-TG GATE VALVE ½ F 101 UHF 5G GATE VALVE ½ - 1½ 2 F 102 UHF 2-AG GLOBE VALVE ½ F 102 UHF 2-TG GLOBE VALVE ½ - 1½ 4 HF Valves F 102 UHF 5G GLOBE VALVES ½ - 1½ 4 F 501 UHF 5G LIFT CHECK VALVE ½ - 1½ 5 FLANGED END VALVES 1014 UHF 1G GATE VALVE - MONEL BODY CLASS 600 ½ UHF 1G GATE VALVE - MONEL BODY CLASS 300 1½ UHF 2-TG GATE VALVE CLASS 600 ½ UHF 2-TG GATE VALVE CLASS 300 1½ UHF 4G GATE VALVE - MONEL BODY CLASS 150 1½ UHF 5G GATE VALVE - MONEL BODY CLASS 300 1½ UHF 1G GLOBE VALVE - MONEL BODY CLASS 600 ½ UHF 1G GLOBE VALVE - MONEL BODY CLASS 300 1½ UHF 2-AG GLOBE VALVE CLASS 600 ½ UHF 2-AG GLOBE VALVE CLASS 300 1½ UHF 2-TG GLOBE VALVE CLASS 600 ½ UHF 2-TG GLOBE VALVE CLASS 300 ½ UHF 2-TG GLOBE VALVE CLASS 300 1½ UHF 4G GLOBE VALVE CLASS 150 1½ UHF 5G GLOBE VALVE CLASS 300 1½ UHF 1 LIFT CHECK VALVE - MONEL BODY CLASS 600 ½ UHF 1 SWING CHECK VALVE - MONEL BODY CLASS 300 1½ UHF 2G SWING CHECK VALVE CLASS 600 ½ UHF 2 SWING CHECK VALVE CLASS 300 1½ UHF 4G SWING CHECK VALVE CLASS 150 1½ UHF 5 SWING CHECK VALUE CLASS 300 1½ Blk lvs 416.indd 1 4/16/09 8:48:56 PM

35 Blk lvs 416.indd 2 4/16/09 8:48:56 PM

36 SMALL BORE GATE VALVES - Class (API 602) Piping Class HF 2 & HF 20 Fig No. F 101 UHF 2-TG Stem Grease Injector Seat Execution ST (with Teflon Insert) F 101 UHF 2-TG-ST Seat Execution M-ST (metal seated) F 101 UHF 2-TG-M-ST Pipe Class HF 2 & HF 20 Figure No. F 101 UHF 2-TG POS PART NAME MATERIAL 1 Body A216 WCb or A 105 or A350 LF2 2 Seat Ring Monel (w. Teflon seat insert) 3 Wedge Monel K500 4 Stem Monel K500 5 Bonnet A216 WCb or A 105 or A350 LF2 6 Bonnet Gasket Monel / Graphite SWT 7 Bonnet Stud A 193 B7M 10 Bonnet Stud Nut A 194 2HM 12 / 18 Gland Stud / Gland Stud Nut A 193 B7M / A 194 2HM 15 Gland Monel 16 Gland Flange A Packing Graphite 24 Yoke Nut B 148 Gr Handwheel Carbon Steel 51 Lantern Ring Monel 95 Grease Injector Carbon Steel Body / Monel Ball DIMENSIONS & WEIGHTS Valve Size [inch] 1 A in. [mm] 3.15 [80] 3.54 [90] 4.33 [110] H open in. [mm] 7.91 [201] 7.91 [201] 9.49 [241] G in. [mm] 3.94 [100] 3.94 [100] 4.72 [120] Weight lbs [Kg] 5.5 [2.5] 6.6 [3] 10.1 [4.6] Small Bore Gate Valves Technical Drawing Blk lvs 416.indd 3 4/16/09 8:48:59 PM

37 SMALL BORE GATE VALVES - Class (API 602) Piping Class HF 4 & HF 40 Piping Class HF 5 & HF 50 Fig No. F 101 UHF 5G Fig No. F 101 UHF 5G Seat Execution ST (NS " to 1") Expanded seats F 101 UHF 5G-ST Seat Execution MI (NS 1 ") Single-Welded seats F 101 UHF 5G-MI Pipe Class HF 4 HF 40 Pipe Class HF 5 HF 50 Figure No. F 101 UHF 5G POS PART NAME MATERIAL 1 Body A216 WCb or A 105 or A350 LF2 2 Seat Ring Monel 3 Wedge Monel K500 4 Stem Monel K500 5 Bonnet A216 WCb or A 105 or A350 LF2 6 Bonnet Gasket Monel / Graphite SWT 7 Bonnet Stud A 193 B7M 10 Bonnet Stud Nut A 194 2HM 12 / 18 Gland Stud / Gland Stud Nut A 193 B7M / A 194 2HM 15 Gland Monel 16 Gland Flange A Packing Graphite 24 Yoke Nut B 148 Gr Handwheel Carbon Steel 51 Lantern Ring Not Applicable 95 Grease Injector Not Applicable DIMENSIONS & WEIGHTS Valve Size [inch] 1 1 A in. [mm] 3.15 [80] 3.54 [90] 4.33 [110] 5.00 [127] H open In. [mm] 7.91 [201] 7.91 [201] 9.49 [241] [305] G in. [mm] 3.94 [100] 3.94 [100] 4.72 [120] 5.51 [140] Weight lbs [Kg] 5.5 [2.5] 6.6 [3] 10.1 [4.6] 19.2 [8.7] 2 Technical Drawing Small Bore Gate Valves Blk lvs 416.indd 4 4/16/09 8:49:00 PM

38 SMALL BORE GLOBE VALVES - Class 800 Piping Class HF 2 & HF 20 Fig. No. F102 UHF 2-AG Stem Grease Injector Seat Grease Injector Pipe Class HF 2 & HF 20 Fig. No. F 102 UHF 2-AG POS PART NAME MATERIAL 1 Body A 216 WCB or A 105 or A 350 LF2 2 Seat Ring Monel (w. Seat grease injector) 3 Disc Monel K500 4 Stem Monel K500 5 Bonnet A 216 WCB or A 105 or A 350 LF2 6 Bonnet Gasket Soft Iron 7 Bonnet Stud A 193 B7M 10 Bonnet Stud Nut A 194 2HM 12 / 18 Gland Stud / Gland Stud Nut A 193 B7M / A 194 2HM 15 Gland Monel 16 Gland Flange A Packing Graphite 24 Yoke Nut B 148 Gr Handwheel Carbon Steel 51 Lantern Ring Monel 95 Grease Injector Carbon Steel Body / Monel Ball DIMENSIONS & WEIGHTS Valve Size [inch] 1 A in. [mm] 4.49 [114] 4.49 [114] 4.49 [114] H open in. [mm] 8.86 [225] [267] [286] G in. [mm] 3.94 [100] 3.94 [100] 4.72 [120] Weight lbs [Kg] 5.5 [2.5] 6.6 [3] 10.1 [4.6] Small Bore Globe Valves Technical Drawing Blk lvs 416.indd 5 4/16/09 8:49:01 PM

39 SMALL BORE GLOBE VALVES - Class 800 Piping Class HF 2 & HF 20 Piping Class HF 4 & HF 40 Piping Class HF 5 & HF 50 Fig. No. F102 UHF 2-TG Fig. No. F102 UHF 5G Fig. No. F102 UHF 5G Fig. No. F102 UHF 5G Seat Execution ST (NS " to 1") F 102 UHF 5G-ST Fig. No. F102 UHF 2-TG Stem Grease Injector Seat Execution OP (NS 1 " ) F 102 UHF 5G-OP PTFE Disc Insert Pipe Class HF 4 & HF 40 Pipe Class HF2 & HF 20 Pipe Class HF 5 & HF 50 Fig. No. F 102 UHF 5G Fig. No. F 102 UHF 2-TG POS PART NAME MATERIAL MATERIAL 1 Body A 216 WCB or A 105 or A350 LF2 A 216 WCB or A 105 or A350 LF2 2 Seat Ring Monel Monel 3 Disc Monel K500 Monel K500 (w. Teflon insert) 4 Stem Monel K500 Monel K500 5 Bonnet A 216 WCB or A 105 or A 350 LF2 A 216 WCB or A 105 or A350 LF2 6 Bonnet Gasket Monel / Graphite (Sp. wound type.) Monel / Graphite (Sp. wound type.) 7 Bonnet Stud A 193 B7M A 193 B7M 10 Bonnet Stud Nut A 194 2HM A 194 2HM 12 / 18 Gland Stud / Gland Stud Nut A 193 B7M / A 194 2HM A 193 B7M / A 194 2HM 15 Gland Monel Monel 16 Gland Flange A 105 A Packing Graphite Graphite 24 Yoke Nut B 148 Gr 953 B 148 Gr Handwheel Carbon Steel Carbon Steel 51 Lantern Ring Not Applicable Monel 95 Grease Injector Not Applicable Monel DIMENSIONS & WEIGHTS Valve Size [inch] 1 1 A in. [mm] 3.15 [80] 3.54 [90] 4.33 [110] 6.10 [155] H open in. [mm] 7.95 [202] 7.95 [202] 9.65 [245] [308] G in. [mm] 3.94 [100] 3.94 [100] 4.72 [120] 5.51 [140] Weight lbs [Kg] 5.5 [2.5] 6.6 [3] 10.1 [4.6] 19.4 [8.8] 4 Technical Drawing Small Bore Globe Valves Blk lvs 416.indd 6 4/16/09 8:49:01 PM

40 SMALL BORE LIFT CHECK VALVES - Class 800 Piping Class HF 2 & HF 20 Piping Class HF 4 & HF 40 Piping Class HF 5 & HF 50 Fig. No. F501 UHF 5G Fig. No. F501 UHF 5G Fig. No. F501 UHF 5G Seat Execution OP (NS 1 ") F 501 UHF 5G-OP Seat Execution ST (NS " to 1") F 501 UHF 5G-ST Pipe Class HF 2 & HF 20 Pipe Class HF 4 & HF 40 Pipe Class HF 5 & HF 50 Fig. No. F 501 UHF 5G Fig. No. F 501 UHF 5G POS PART NAME MATERIAL MATERIAL 1 Body A 105 or A350 LF2 A 105 or A350 LF2 2 Seat Ring Monel Monel 3 Disc Monel K500 Monel K500 5 Bonnet A 105 or A350 LF2 A 105 or A350 LF2 6 Bonnet Gasket Monel / Graphite (sp. wound type) Monel / Graphite (sp. wound type) 7 Bonnet Stud A 193 B7M A 193 B7M 10 Bonnet Stud Nut A 194 2HM A 194 2HM DIMENSIONS & WEIGHTS Valve Size [inch] 1 1 A in. [mm] 3.15 [80] 3.54 [90] 4.33 [110] 6.10 [155] H in. [mm] 2.17 [55] 2.17 [55] 2.91 [74] 4.33 [110] Weight lbs [Kg] 2.6 [1.2] 3.1 [1.4] 5.5 [2.5] 13.2 [6] Small Bore Lift Check Valves Technical Drawing Blk lvs 416.indd 7 4/16/09 8:49:02 PM

41 FLANGED SMALL BORE GATE VALVES - Class 600 Piping Class HF 1 & HF 10 Fig. No UHF 1G Stem Grease Injector Seats Grease Injector Pipe Class HF 1 & HF 10 Fig. No UHF 1G POS PART NAME MATERIAL 1 Body Monel 2 Seat Ring Monel (w. Grease injector) 3 Wedge Monel K500 4 Stem Monel K500 5 Bonnet Monel 6 Bonnet Gasket Monel (RTJ) 7 Bonnet Stud A 193 B7M 10 Bonnet Stud Nut A 194 2HM 12 / 18 Gland Stud / Gland Stud Nut A 193 B7M / A 194 2HM 15 Gland Monel 16 Gland Flange A Packing Graphite 24 Yoke Nut B 148 Gr Handwheel Carbon Steel 51 Lantern Ring Monel 95 Grease Injector Monel DIMENSIONS & WEIGHTS Valve Size [inch] 1 A in. [mm] 6.50 [165] 7.50 [191] 8.50 [216] H open in. [mm] 8.74 [222] 7.99 [203] 9.57 [243] G in. [mm] 3.94 [100] 3.94 [100] 4.72 [120] Weight lbs [Kg] 11.0 [5] 13.2 [6] 17.6 [8] 6 Technical Drawing Flanged Small Bore Gate Valves Blk lvs 416.indd 8 4/16/09 8:49:03 PM

42 LARGE BORE GATE VALVES - Class 300 Piping Class HF 1 & HF 10 Fig. No UHF 1G Stem Grease Injector Seat Grease Injector Pipe Class HF 1 & HF 10 Fig. No UHF 1G POS PART NAME MATERIAL 1 Body A 494 M Seat Ring Monel 3 Wedge Monel 4 Stem Monel K500 5 Bonnet A 494 M Bonnet Gasket Monel (RTJ) 7 Bonnet Stud A 193 B7M 10 Bonnet Stud Nut A 194 2HM 12 Gland Stud A 193 B7M 15 Gland Monel 12 / 18 Gland Stud / Gland Stud Nut A 193 B7M / A 194 2HM 17 Packing Graphite 24 Yoke Nut B 148 Gr Handwheel Carbon Steel 51 Lantern Ring Monel 53 Back Seat Bushing Monel 95 Grease Injector Monel DIMENSIONS & WEIGHTS Valve Size [inch] RF in. [mm] 7.50 [190] 8.50 [216] 9.50 [241] [283] H open in. [mm] [460] [470] [495] [570] G in. [mm] 8.66 [220] 8.66 [220] 8.66 [220] [300] Weight lbs [Kg] 52.9 [24] 68.3 [31] [48] [61] DIMENSIONS & WEIGHTS Valve Size [inch] RF in. [mm] [305] [403] [419] H open in. [mm] [679] [900] [1138] G in. [mm] [350] [400] [500] Weight lbs [Kg] [95] [170] [265] Large Bore Gate Valves Technical Drawing Blk lvs 416.indd 9 4/16/09 8:49:04 PM

43 FLANGED SMALL BORE GATE VALVES - Class 600 Piping Class HF 2 & HF 20 Fig. No UHF 2-TG Stem Grease Injector Seat Execution: ST Teflon Sear Insert 1014 UHF 2-TG-st Seat Execution: M-ST Metal Seated 1014 UHF 2-TG-M-st Pipe Class HF 2 & HF 20 Fig. No UHF 2-TG POS PART NAME MATERIAL 1 Body A216 WCB or A105 or A350 LF2 2 Seat Ring Monel (w. Teflon insert) 3 Wedge Monel K500 4 Stem Monel K500 5 Bonnet A216 WCB or A105 or A350 LF2 6 Bonnet Gasket Monel / Graphite SWT 7 Bonnet Stud A 193 B7M 10 Bonnet Stud Nut A 194 2HM 12 / 18 Gland Stud / Gland Stud Nut A 193 B7M / A 194 2HM 15 Gland Monel 16 Gland Flange A Packing Graphite 24 Yoke Nut B 148 Gr Handwheel Carbon Steel 51 Lantern Ring Monel 95 Grease Injector Carbon Steel Body / Monel Ball DIMENSIONS & WEIGHTS Valve Size [inch] 1 A in. [mm] 6.50 [165] 7.50 [191] 8.50 [216] H open in. [mm] 8.74 [222] 7.99 [203] 9.57 [243] G in. [mm] 3.94 [100] 3.94 [100] 4.72 [120] Weight lbs [Kg] 11.0 [5] 13.2 [6] 17.6 [8] 8 Technical Drawing Flanged Small Bore Gate Valves Blk lvs 416.indd 10 4/16/09 8:49:04 PM

44 LARGE BORE GATE VALVES - Class 300 Piping Class HF 2 & HF 20 Piping Class HF 5 & HF 50 Fig. No UHF2-TG Fig. No UHF5 G Fig. No UHF 2-TG G Stem Sealant Injector Fig. No UHF 5G Seat Execution OP (NS 1 " to 4") 1012 UHF 5G-OP Seat Execution H-OP (NS 1 " to 4") 1012 UHF2 TG-H-OP Seat Execution PW (NS 6" and larger) 1012 UHF2 5G-PW Seat Execution H-PW (NS 6" and larger) 1012 UHF2 TG-H-PW Pipe Class HF 5 & HF 50 Pipe Class HF 2 & HF 20 Fig. No UHF 5G Fig. No UHF 2-TG POS PART NAME MATERIAL MATERIAL 1 Body A 216 WCB or A105 or A350 LF2 A 216 WCB or A105 or A350 LF2 2 Seat Ring Monel Monel (w Teflon Insert) 3 Wedge Monel K500 Monel K500 4 Stem Monel K500 Monel K500 5 Bonnet A 216 WCB or A105 or A350 LF2 A 216 WCB or A105 or A350 LF2 6 Bonnet Gasket Monel (RTJ) Monel (RTJ) 7 Bonnet Stud A 193 B7M A 193 B7M 10 Bonnet Stud Nut A 194 2HM A 194 2HM 12 / 18 Gland Stud/Gland Stud Nut A 193 B7M / A 194 2HM A 193 B7M / A 194 2HM 15 Gland Monel Monel 16 Gland Flange A 105 A Packing Graphite Graphite 24 Yoke Nut B 148 Gr 953 B 148 Gr Handwheel Carbon Steel Carbon Steel 51 Lantern Ring Not Applicable Monel 53 Back Seat Bushing Monel Monel 95 Stem Grease Injector Not Applicable Carbon Steel Body / Monel Ball Valve Size [inch] RF in. [mm] H open in. [mm] G in. [mm] Weight lbs [Kg] DIMENSIONS & WEIGHTS [190] [460] 8.66 [220] 52.9 [24] 8.50 [216] [470] 8.66 [220] 68.3 [31] 9.50 [241] [495] 8.66 [220] [48] [283] [570] [300] [61] [305] [679] [350] [95] [403] [900] [400] [170] [419] [1138] [500] [265] [457] [1315] [600] [398] [502] [1539] [762] [1657] [838] [1926] [914] [2096] [991] [2362] [1092] [2580] [1143] [2791] [570] [765] [1030] [1280] [1470] [2185] [2205] Large Bore Gate Valves Technical Drawing Blk lvs 416.indd 11 4/16/09 8:49:05 PM

45 LARGE BORE GATE VALVES - Class 150 Piping Class HF 4 & HF 40 Fig. No UHF 4G Seat Execution OP (NS 1 " to 4") 1011 UHF 4G-OP Seat Execution PW (NS 6 and larger) 1011 UHF 4G-PW Pipe Class HF 4 & 40 Fig. No UHF 4G POS PART NAME MATERIAL 1 Body A216 WCB or A105 or A350 LF2 2 Seat Ring Monel 3 Wedge Monel 4 Stem Monel K500 5 Bonnet A216 WCB or A105 or A350 LF2 6 Bonnet Gasket Monel / Graphite SWT 7 Bonnet Stud A 193 B7M 10 Bonnet Stud Nut A 194 2HM 12 / 18 Gland Stud / Gland Stud Nut A 193 B7M / A 194 2HM 15 Gland Monel 16 Gland Flange A Packing Graphite 24 Yoke Nut B 148 Gr Handwheel Carbon Steel 53 Back Seat Bushing Monel Valve Size [inch] RF in. [mm] H open in. [mm] G [mm] in DIMENSIONS & WEIGHTS [165] [440] 5.90 [150] 7.00 [178] [470] 8.66 [220] 7.50 [190] [490] 8.66 [220] 8.00 [203] [555] [300] 9.00 [229] [655] [350] [267] [855] [400] [292] [1110] [500] [330] [1290] [500] [356] [1510] [600] [381] [1630] [650] [406] [1800] [650] [432] [2030] [700] [457] [2230] [508] [2460] [508] [2615] Weight lbs [Kg] 35.3 [16] 48.5 [22] 66.1 [30] 81.6 [37] [56] [97] [152] [245] [347] [450] [585] [701] [860] [1024] [1275] 10 Technical Drawing Large Bore Gate Valves Blk lvs 416.indd 12 4/16/09 8:49:06 PM

46 FLANGED SMALL BORE GLOBE VALVES - Class 600 Piping Class HF1 & HF 10 Piping Class HF2 & HF 20 Fig. No UHF 1G Fig. No UHF 2-AG Seat Grease Injector Stem Grease Injector Pipe Class HF 1 & HF 10 Pipe Class HF 2 & HF 20 Fig. No UHF 1G Fig. No UHF 2-AG POS PART NAME MATERIAL 1 Body Monel A 216 WCB or A 105 or A350 LF2 2 Seat Ring Monel (w. Grease injector) Monel (w. Grease injector) 3 Disc Monel K500 Monel K500 4 Stem Monel K500 Monel K500 5 Bonnet Monel A 216 WCB or A 105 or A350 LF2 6 Bonnet Gasket Monel (RTJ) Soft Iron (RTJ) 7 Bonnet Stud A 193 B7M A 193 B7M 10 Bonnet Stud Nut A 194 2HM A 194 2HM 12 / 18 Gland Stud / Gland Stud Nut A 193 B7M / A 194 2HM A 193 B7M / A 194 2HM 15 Gland Monel Monel 16 Gland Flange Monel A Packing Graphite Graphite 24 Yoke Nut B 148 Gr 953 B 148 Gr Handwheel Carbon Steel Carbon Steel 51 Lantern Ring Monel Monel 95 Grease Injector Monel Carbon Steel Body / Monel Ball DIMENSIONS & WEIGHTS Valve Size [inch] 1 A ( RF/ RTJ ) in. [mm] 6.50 [165] 7.52 [191] 8.50 [216] H open in. [mm] 8.86 [225] [267] [286] G in. [mm] 3.94 [100] 4.72 [120] 5.51 [140] Weight lbs [Kg] 11.0 [5] 13.2 [6] 17.6 [8] Flanged Small Bore Globe Valves Technical Drawing Blk lvs 416.indd 13 4/16/09 8:49:07 PM

47 LARGE GLOBE VALVES - Class 300 Piping Class HF 1 Piping Class HF 2A Fig. No UHF 1G Fig. No UHF 2-AG Stem Grease Injector Seat Grease Injector Seat Execution OP 1022 UHF 2-AG-OP Pipe Class HF 1 & HF 10 Pipe Class HF 2 & HF 20 Fig. No UHF 1G Fig. No UHF 2-AG POS PART NAME MATERIAL MATERIAL 1 Body A 494 M35-1 A 216 WCB or A105 or A350 LF2 2 Seat Ring Monel (w. Grease injector) Monel (w. Grease injector) 3 Wedge Monel K500 Monel K500 4 Stem Monel K500 Monel K500 5 Bonnet A 494 M35-1 A 216 WCB or A105 or A350 LF2 6 Bonnet Gasket Monel (RTJ.) Monel (RTJ.) 7 Bonnet Stud A 193 B7M A 193 B7M 10 Bonnet Stud Nut A 194 2HM A 194 2HM 12 / 18 Gland Stud / Gland Stud Nut A 193 B7M / A 194 2HM A 193 B7M / A 194 2HM 15 Gland Monel Monel 16 Gland Flange Monel A Packing Graphite Graphite 24 Yoke Nut B 148 Gr 953 B 148 Gr Handwheel Carbon Steel Carbon Steel 51 Lantern Ring Monel Monel 53 Back Seat Bushing Monel Monel 95 Grease Injector Monel Carbon Steel Body / Monel Ball DIMENSIONS & WEIGHTS Valve Size [inch] RF in. [mm] 9.00 [229] [267] [292] [318] [356] [444] [559] H open in. [mm] [360] [387] [435] [459] [486] [593] [700] G in. [mm] 8.86 [225] 8.66 [220] [300] [350] [400] [400] [500] Weight lbs [Kg] 44.1 [20] 70.6 [32] 44.1 [20] [59] [83] [148] [254] 12 Technical Drawing Large Globe Valves Blk lvs 416.indd 14 4/16/09 8:49:08 PM

48 FLANGED SMALL BORE GLOBE VALVES - Class 300 & 600 Piping Class HF 2 & HF 20 Class 600 Piping Class HF 2 & HF 20 Class 300 Fig No UHF 2-TG Fig No UHF 2-TG PTFE Disc Insert Stem Grease Injector Valve Class 600 Valve Class 300 Fig. No UHF 2-TG Fig. No UHF 2-TG POS PART NAME MATERIAL 1 Body A 216 WCB or A 105 or A350 LF2 A 216 WCB or A 105 or A350 LF2 2 Seat Ring Monel Monel 3 Disc Monel K500 (w. Teflon Insert) Monel K500 (w. Teflon Insert) 4 Stem Monel K500 Monel K500 5 Bonnet A 216 WCB or A 105 or A350 LF2 A 216 WCB or A 105 or A350 LF2 6 Bonnet Gasket Monel / Graphite SWT Monel / Graphite SWT 7 Bonnet Stud A 193 B7M A 193 B7M 10 Bonnet Stud Nut A 194 2HM A 194 2HM 12 / 18 Gland Stud / Gland Stud Nut A 193 B7M / A 194 2HM A 193 B7M / A 194 2HM 15 Gland Monel Monel 16 Gland Flange A 105 A Packing Graphite Graphite 24 Yoke Nut B 148 Gr 953 B 148 Gr Handwheel Carbon Steel Carbon Steel 51 Lantern Ring Monel Monel 95 Stem Grease Injector Carbon Steel Body / Monel Ball Carbon Steel Body / Monel Ball DIMENSIONS & WEIGHTS Valve Class 600 Fig. No UHF 2-TG Valve Class 300 Fig. No UHF 2-TG Valve Size [inch] 1 1 A in. [mm] 6.50 [165] 7.50 [191] 8.50 [216] 6.00 [152] 7.00 [178] 8.00 [203] H open in. [mm] 7.87 [200] 8.82 [224] 9.88 [251] 7.87 [200] 8.82 [224] 9.88 [251] G in. [mm] 3.94 [100] 4.72 [120] 4.72 [120] 3.94 [100] 4.72 [120] 4.72 [120] Weight lbs [Kg] 11.0 [5] 13.2 [6] 17.6 [8] 9.92 [4.5] [5.7] 17.0 [7.7] Flanged Small Bore Globe Valves Technical Drawing Blk lvs 416.indd 15 4/16/09 8:49:09 PM

49 LARGE GLOBE VALVES - Class 300 Piping Class HF 2 & HF 20 Piping Class HF 5 & HF 50 Fig. No UHF 2-TG Fig. No UHF 5G Fig. No UHF 2-TG Stem Grease Injector NS 1 " to 10" 1022 UHF 2-TG Fig. No UHF 5G Metal-to-Metal Plug Seal 1022 UHF 5G-OP Teflon Disc Insert 1022 UHF 2-TG-OP Pipe Class HF 5 & 50 Pipe Class HF 2 & 20 Fig. No UHF 5G Fig No UHF 2-TG POS PART NAME MATERIAL MATERIAL 1 Body A 216 WCB or A105 or A350 LF2 A 216 WCB or A105 or A350 LF2 2 Seat Ring Monel Monel 3 Disc Monel K500 Monel K500 (w. Teflon insert) 4 Stem Monel K500 Monel K500 5 Bonnet A 216 WCB or A105 or A350 LF2 A 216 WCB or A105 or A350 LF2 6 Bonnet Gasket Monel / Graphite (SWT) Monel / Graphite (SWT) 7 Bonnet Stud A 193 B7M A 193 B7M 10 Bonnet Stud Nut A 194 2HM A 194 2HM 12 / 18 Gland Stud / Gland Stud Nut A 193 B7M / A 194 2HM A 193 B7M / A 194 2HM 15 Gland Monel Monel 16 Gland Flange A 105 A Packing Graphite Graphite 24 Yoke Nut B 148 Gr 953 B 148 Gr Handwheel Carbon Steel Carbon Steel 51 Lantern Ring Not Applicable Monel 53 Back Seat Bushing Monel Monel 95 Grease Injector Not Applicable Carbon Steel Body / Monel Ball DIMENSIONS & WEIGHTS Valve Size [inch] RF [mm] H open [mm] G [mm] Weight [Kg] in. in. in. lbs 9.00 [229] [360] 8.86 [225] 44.1 [20] [267] [387] 8.66 [220] 70.6 [32] [292] [435] [300] 44.1 [20] [318] [459] [350] [59] [356] [486] [400] [83] [444] [593] [400] [148] [559] [700] [500] [254] [622] [978] [381] 14 Technical Drawing Large Globe Valves Blk lvs 416.indd 16 4/16/09 8:49:10 PM

50 LARGE GLOBE VALVES - Class 150 Piping Class HF 4 & HF 40 Fig. No UHF 4 G Seat Execution OP 1021 UHF 4G-OP Pipe Class HF 4 & HF 40 Fig. No UHF 4G POS PART NAME MATERIAL 1 Body A 216 WCB or A105 or A350 LF2 2 Seat Ring Monel 3 Wedge Monel K500 4 Stem Monel K500 5 Bonnet A 216 WCB or A105 or A350 LF2 6 Bonnet Gasket Monel / Graphite SWT 7 Bonnet Stud A 193 B7M 10 Bonnet Stud Nut A 194 2HM 12 / 18 Gland Stud / Gland Stud Nut A 193 B7M / A 194 2HM 15 Gland Monel 16 Gland Flange A Packing Graphite 24 Yoke Nut B 148 Gr Handwheel Carbon Steel 53 Back Seat Bushing Monel DIMENSIONS & WEIGHTS Valve Size [inch] RF in. [mm] 6.50 [165] 8.00 [203] 11.5 [292] 9.50 [241] [292] [406] H open in. [mm] [365] [365] [435] [445] [465] [560] G in. [mm] 8.66 [220] 8.66 [220] [300] 8.66 [220] [300] [400] Weight lbs [Kg] 37.5 [17] 46.3 [21] 44.1 [20] 81.6 [37] [56] [97] Large Globe Valves Technical Drawing Blk lvs 416.indd 17 4/16/09 8:49:11 PM

51 FLANGED SMALL BORE LIFT CHECK VALVE - Class 600 Pipe Class HF 1 & HF 10 Fig. No UHF 1 Pipe Class HF 1 & HF 10 Fig. No UHF 1 POS PART NAME MATERIAL 1 Body Monel 2 Seat Ring Monel 3 Disc Monel K500 5 Bonnet Monel 6 Bonnet Gasket Monel (RTJ) 7 Bonnet Stud A 193 B7M 10 Bonnet Stud Nut A 194 2HM DIMENSIONS & WEIGHTS Valve Size [inch] 1/2 3/4 1 A in. [mm] 6.50 [165] 7.50 [190] 8.50 [216] H in. [mm] 1.93 [49] 2.20 [56] 2.64 [67] Weight lbs [Kg] 6.2 [2.8] 1.04 [4.7] 12.6 [5.7] 16 Technical Drawings Flanged Small Bore Lift Check Valve Blk lvs 416.indd 18 4/16/09 8:49:12 PM

52 SMALL BORE SWING CHECK VALVES - Class 600 Piping Class HF 2 & HF 20 Fig. No UHF 2G Pipe Class HF 2 & HF 20 Fig. No UHF 2G POS PART NAME MATERIAL 1 Body A216 WCB or A105 or A350 LF2 2 Seat Ring Monel 3 Disc Monel K500 5 Bonnet A216 WCB or A105 6 Bonnet Gasket Monel / Graphite (SWT) 7 Bonnet Stud A 193 B7M 10 Bonnet Stud Nut A 194 2HM 31 Disc Arm Pin Monel K Disc Arm Monel 36 Disc Nut Monel DIMENSIONS & WEIGHTS Valve Size [inch] 1 A in. [mm] 6.50 [165] 7.50 [190] 8.50 [216] H in. [mm] 3.27 [83] 2.16 [55] 2.95 [75] Weight lbs [Kg] 6.8 [3.1] 11.0 [5] 16.1 [7.3] Small Bore Swing Check Valves Technical Drawing Blk lvs 416.indd 19 4/16/09 8:49:12 PM

53 LARGE BORE - Monel BODY - CHECK VALVES - Class 300 Piping Class HF1 & HF 10 Fig. No UHF 1 34 Pipe Class HF 1 & HF 10 Fig. No UHF 1 POS PART NAME MATERIAL 1 Body A 494 M Seat Ring Monel 3 Disc Monel 5 Bonnet Monel 6 Bonnet Gasket Monel (RTJ) 7 Bonnet Stud A 193 B7M 10 Bonnet Stud Nut A194 2HM 31 Disc Arm Pin Monel K Disc Arm Monel 34 Plug Monel K Disc Nut Monel DIMENSIONS & WEIGHTS Valve Size [inch] 1 1/ / A in [mm] [241] [267] [292] [318] [356] [444] [533] [622] H open in [mm] [165] [175] [190] [215] [255] [300] [355] [395] Weight lbs [Kg] [22] [25] [33] [45] [70] [130] [225] [334] H A 18 Technical Drawing Large Bore Monel Body Check Valves Blk lvs 416.indd 20 4/16/09 8:49:13 PM

54 LARGE BORE CHECK VALVES - Class 300 Piping Class HF 2 & HF 20 Fig. No UHF 2 Piping Class HF 5 & HF 50 Fig. No UHF 5 Seat Execution OP (2" to 4") 1032 UHF 2 OP / 1032 UHF 5-OP Seat Execution PW (6"and larger) 1032 UHF 2 PW / 1032 UHF 5-PW 34 Pipe Class HF2 & HF 20 Pipe Class HF 5 & HF 50 Fig. No UHF 2 NS 1 " to 24" Fig. No UHF 5 NS 2" to 16" POS PART NAME MATERIAL MATERIAL 1 Body A 216 WCB or A105 or A350 LF2 A 216 WCB or A105 or A350 LF2 2 Seat Ring Monel Monel 3 Disc Monel Monel 5 Bonnet A 216 WCB or A350 LF2 A 216 WCB or A350 LF2 6 Bonnet Gasket Monel / Graphite SWT Monel / Graphite SWT 7 Bonnet Stud A 193 B7M A 193 B7M 10 Bonnet Stud Nut A 194 2HM A 194 2HM 31 Disc Arm Pin Monel K500 Monel K Disc Arm Monel Monel 34 PLug Monel K500 Monel K Disc Nut Monel Monel DIMENSIONS & WEIGHTS Valve Size [inch] A in [mm] [241] [267] [292] [318] [356] [444] [533] [622] [711] [838] [864] [978] [1016] [1118] [1346] H [mm] in [165] 6.89 [175] 7.48 [190] 8.46 [215] [255] [300] [355] [395] [447] [515] [530] [630] [640] [670] [740] H Weight lbs [Kg] 48.5 [22] 55.1 [25] 72.8 [33] 99.2 [45] [70] [130] [225] [334] [475] [705] [870] [1040] [1270] [1730] [2250] A Large Bore Check Valves Technical Drawing Blk lvs 416.indd 21 4/16/09 8:49:14 PM

55 LARGE BORE CHECK VALVES - Class 150 Piping Class HF 4 & HF 40 Fig. No UHF 4G SEAT OPTION OP (NS 2" to 4") 1031 UHF 4G-OP SEAT OPTION PW (NS 6" and larger) 1031 UHF 4G-PW 34 Pipe Class HF 4 & HF 40 Fig. No UHF 4G POS PART NAME MATERIAL 1 Body A 216 WCB or A105 or A350 LF2 2 Seat Ring Monel 3 Disc Monel 5 Bonnet A 216 WCB or A350 LF2 6 Bonnet Gasket Monel / Graphite (sp. wound type) 7 Bonnet Stud A 193 B7M 10 Bonnet Stud Nut A 194 2HM 31 Disc Arm Pin Monel K Disc Arm Monel 34 Plug Monel K Disc Nut Monel DIMENSIONS & WEIGHTS Valve Size [inch] A in [mm] [203] [216] [241] [292] [356] [495] [622] [698] [787] [864] H in [mm] [155] [170] [205] [240] [280] [330] [390] [440] [500] [510] Weight lbs [Kg] [17] [22] [30] [49] [80] [161] [218] [350] [473] [480] H A 20 Technical Drawings Large Bore Check Valves Blk lvs 416.indd 22 4/16/09 8:49:15 PM

56 HEAD OFFICE & MANUFACTURING PLANT PetrolValves S.r.l. Viale G. Borri, Castellanza (VA), ITALY Tel: Fax: REGIONAL OFFICES PetrolValves LLC (USA) 6000 W. Sam Houston Parkway North Houston, Texas 77041, USA Tel: Fax: PetrolValves (G.B.) Ltd Church Street Hampton, Middlesex TW12 2EG, England, UK Tel: Fax: PetrolValves (G.B.) Ltd -Aberdeen 20 Rubislaw Terrace Aberdeen AB10 1XE, Scotland, UK Tel: Fax: PetrolValves A.S. (Norway) Luramyrveien 57, N-4313 P.O. Box 1153 Lura, N-4391 Sandnes, NORWAY Tel: Fax: TKA - PetrolValves Algeria N 108 Lotissement Saidoun Mohamed, Kouba, Alger, ALGERIA Tel: Fax: tka-petrolvalves-alger@ petrolvalves.it Saudi PetrolValves Co. Ltd Dammam Second Industrial City P.O. Box 1280 Al Khobar 31952, Kingdom of Saudi Arabia Tel: Fax: saudi-petrolvalves@petrolvalves.it PetrolValves Singapore Block 86, Marine Parade Central, , Singapore Tel: Fax: sales@petrolvalves.sg PETROLVALVES IS A REGISTERED TRADEMARK Catalog_0416.indd Sec1:5 4/16/09 10:45:39 PM