ISO Cylinders. Features

Transcription

1 Features Three versions of the Piston Rod Guidance modules are available. For standard applications, units with plain PTFE coated bearings are available but for more demanding applications with greater loadings, versions featuring linear ball bearings provide excellent stability and rigidity. Anti-rotation Anti-rotation is achieved by twin guide bars. The piston rod is attached to the end plate by a self aligning coupling. High loading torque The units provide high resistance to torque loading and greatly increased linear load bearing capacity. Light weight The cast aluminium body is of a compact and light design, providing mounting in vertical or horizontal positions. The flange plate mounting holes are fully compatible with the 3D manipulators and short stroke modules, providing even greater flexibility. Long life Sealed linear ball bearings are greased for life. Aluminium body provides 3 mounting faces. Guide bars Ball bearing versions stainless steel Plain bearing version hard chrome plated Anti rotation achieved by integral bearings. Choice of linear ball bearings or plain PTFE coated bearings Lubrication points. Cylinder mounting conforms to ISO 31 and DIN 3 standard Flange compatible with 3D product range. Self aligning adaptor for ISO cylinder piston rod.

2 Technical information 'H style' Rod guide with ball bearings Maximum load carried Load (kg) Ø & 1 Ø Ø Ø3 Maximum load carried Load (kg) Ø & 1 Ø Ø f Graphs established at mid point of stroke / C Rod guide with plain bearings Ø3 Stroke (mm) Maximum deflection/max load Maximum deflection/max load Deflection (mm) Deflection (mm) 1.3 Ø Ø Ø Graphs established at mid point of stroke / C Ø3 & 1 Ø3 - & Stroke (mm) Maximum permissible torque (Nm) Maximum permissible torque (Nm) 55 5 Formula: C(Nm) = F(N) x L(m) 5 L Ø 1 Ø Ø Ø Ø 3 F Ø 1 Ø Ø Ø Ø3

3 Dimensions, H style, Rod Guidance Modules A1 B1 L3 + Stroke L1 + Stroke L B7 B N1 on flats B B3 ØD ØB5 C C3 ISO Cylinder B8 F1 +,1 R1 R ØC1 L Lubrication point L5 (Adaptors to W) P1±1 1 holes D5 Deputy thread E1 P±1 E3 D5 P3 ØD3 ØD ØD E ØD1 Dimensions (mm) Bore A1 B1 B B3 B5 B B7 B8 C1 C C3 D1 D D3 D D5 D E ,5 31, ,5, 11 5, 9 M , ,5 58, 11 5, 9 M , , , 11 M , , , 11 M , 1 M , , , 1 M1 Bore E E3 F1 L1 L L3 L L5 N1 P1 P P3 R1 R S W M M M8 1 3, M8 1 1, M M1 1-1 H style order codes and weights (g) Bore Part nos. Part nos. Weights (g) size Ball bearing Plain bearing mm stroke per 1mm extra 3 P1E-KRH-XXX P1E-KRJ-XXX P1E-LRH-XXX P1E-LRJ-XXX 3 P1E-MRH-XXX P1E-MRJ-XXX 95 3 P1E-NRH-XXX P1E-NRJ-XXX 7 95 P1E-PRH-XXX P1E-PRJ-XXX P1E-QRH-XXX P1E-QRJ-XXX

4 Dimensions, U style, Rod Guidance Modules SW1 SW T L7 ØF1 L L T3 ØD3 L11 L A1 A A3 L13 L1 L1 L1 L3 L9 L L5 ØD1 ØD A5 T1 L8 L1 + Stroke Cyl. bore A1 A3 A A5 D1 D D3 F1 L1 L L3 L L5 mm 3 7 3,5 78 1,, M , 8 9 9,, 11 1 M ,5 1 85, 9, M ,5 1,5 9, 5 M , , 11, 18 5 M , 1 1 5, 11, M Cyl. bore L L7 L8 L9 L1 L11 L1 L13 L1 L SW1 SW T1 T T3 mm 3 9 5,5 +/ +/ 8,75 9,5 3, 18,, 13 17,5 1 HEX ,5 +/ 1 +/ 1,,5 38, 3, 51 58, 19,5 1 Ø , +5/ 8 +/ 11,75 18,5 5,, 7, 9, 13 Ø5 3 7, +5/ 8 +/ 1, 3,5 7,75, 75 85, 9, 13 Ø , +/ 5 +/ 1, 9,5 58, 9,5 11, , 1 Ø ,5 +/ 5 +/, 31,5, 31,5 1 13, , 1 Ø 'U' style max load U style order codes and weights (g) Bore Part nos. Weights (g) size Plain bearing mm stroke per 1mm extra 3 P1E-KRK-XXX P1E-LRK-XXX P1E-MRK-XXX 3 P1E-NRK-XXX P1E-PRK-XXX 1 P1E-QRK-XXX 8

5 Mounting kits Horizontal mounting (1) A C B F ØE Raw material: Galvanised steel Note: Mounting kits include fixing screws Vertical mounting () Mounting kits conform to ISO 31 and DIN 3 standard. D D Raw material: Galvanised steel Note: Mounting kits include fixing screws ØE J G K H L Part nos. dimensions (mm) - Weights Bore Mounting (1) Mounting () A B C D E F G H J K L Weight (g) size horizontal vertical (1) () 3 3-1R PIC-KMB 18 3,5 11 1, R PIC-LMB R PIC-MMB 175 7, R PIC-NMB 19 5, R PIC-PMB , R PIC-QMB , ,

6 Sensor clamps for tie bar cylinders used with guidance modules S Reed Switch or Solid State sensors are used in conjunction with the bolt on modular Piston Rod Guidance units. Assembly: Simply hook the bracket over the cylinder tie rods making sure the switch is in contact with the cylinder tube and lock in place with integral grub screw. Reed switch sensor Tie bar mounting bracket Bore Part no. S size Dim , , Smooth profile mounting bracket Bore size Part no Type/Symbol For Contact- Cable Voltage Weight Order code cyl. function length range Current Capacity Kg mm m max A max, W Brown Blue 3- NO 3 1- AC/3 DC,, A 3- NO 3 1- AC/3 DC,38, 1A** 3- NO * 1- AC/3 DC,,1 A 3- NO * 1- AC/3 DC,38,1 3A** 3- NO * 1- AC/DC,38, 31A** * Cable with 8 mm plug must be ordered separately ** With LED indication Solid state sensor, With LED indication Type/Symbol For Contact- Cable Voltage Weight Order code cyl. function length range Current Capacity Kg mm m VDC max A max, W Black Brown Blue 3- PNP NO 3 1-8, 1,5 3A** Cables Type Weight Order Code Kg Cables complete with 8 mm round connections 3 m Flex PVC, m Flex PVC, m Super Flex PVC, m Super Flex PVC, m Polyurethene, m Polyurethene,