Cutting Tools AEROSPACE & DEFENSE NATURAL RESOURCES INFRASTRUCTURE TRANSPORTATION DURABLE GOODS SPECIALTY APPLICATIONS

Transcription

1 Cutting Tools 2009 AEROSACE & DEFENSE NATURAL RESOURCES INFRASTRUCTURE TRANSORTATION DURABLE GOODS SECIALTY ALICATIONS

2 INTRODUCING BEYOND from ennametal... A New Era in Tooling ennametal, the trusted innovator in metalcutting technology, introduces a new era in tooling. Harnessing advanced science and exceptional experience, we ve gone more than a cut above and created Beyond,our next generation, ultra-performance tooling platform. This powerful collection delivers unheard of levels of productivity, efficiency, dependability, and profitability. And beyond. Higher productivity and profitability up to 30% higher Achieve higher metal removal rate (speed, feed, and depth-of-cut). Gain longer tool life. Versatility roducts can be applied across a wide range of applications. Can be used in low- to high-speed applications. Reliability roducts deliver uniform wear for predictable tool life. Achieve reduced depth-of-cut notching. Virtually eliminate chip flow damage. Complete ortfolio The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel turning workpieces.

3 BEYOND Advanced Technology Delivers Superior erformance Typical Inserts Coating under stress Beyond Inserts Reduced stress ost-coat Treatment Reduces stresses. inimizes micro-chipping. Improves coating adhesion. BY ENNAETAL Exceeding expectations. Surpassing excellence.

4 New Grade Naming System = ennametal Brand = Steel = Stainless steel = Cast iron N = Non-ferrous S = High-temp alloys H = Hard materials U = Universal rimary Workpiece aterial ( 513) A = Generation 1 B = Generation 2 C = Generation 3 etc... Future Upgrades of Versions Optional C 25 A Insert aterial Blank = Carbide, uncoated C = Carbide coated T = Cermet Y = Ceramic D = CD B = CBN S = Steel = Steel Secondary Workpiece aterial ( 513) Optional = Stainless steel = Cast iron N = Non-ferrous S = High-temp alloys H = Hard materials U = Universal Relative Hardness ( 513) 01 = Hardest 05 = 10 = 15 = 20 = 25 = 30 = 35= 40 = 45 = 50 = Toughest B4 To place an order, contact ennametal or your authorized ennametal distributor, or visit

5 roduct ortfolio Steel Turning Grades Wear Resistance Toughness Cast Iron Turning Grades Stainless Steel Turning Grades Wear Resistance Wear Resistance Toughness Toughness To place an order, contact ennametal or your authorized ennametal distributor, or visit B5

6 Steel Carbon, Alloy, and Tool Steels up to 450 HB (48 HRC) 1st Step Select the Insert Geometry Negative Wiper Inserts edium Wiper ositive Wiper Inserts edium Wiper feed rate (in/rev) feed rate (in/rev) -W -W Finishing Wiper depth-of-cut (inch) -FW depth-of-cut (mm) depth-of-cut (mm) depth-of-cut (inch) Finishing Wiper -FW feed rate (mm) feed rate (mm) 2nd Step Select the Grade Negative Insert Geometry -FW -W Cutting Condition heavily interrupted cut lightly interrupted cut varying depth-of-cut, casting, or forging skin smooth cut, pre-turned surface ositive Insert Geometry -FW -W C20 C20 C20 C20 1st Step Select the Insert Geometry Negative Inserts ositive Inserts Roughing depth-of-cut (inch) depth-of-cut (mm) -N Finishing depth-of-cut (inch) edium achining feed rate (in/rev) -F -R* (positive) depth-of-cut (mm) -RN edium achining feed rate (in/rev) -LF Fine Finishing Finishing -UF -FN feed rate (mm) Fine Finishing feed rate (mm) *-R Supplemental geometry for high-strength materials -FF 2nd Step Select the Grade -FF Cutting Condition heavily interrupted cut lightly interrupted cut varying depth-of-cut, casting, or forging skin smooth cut, pre-turned surface B6 Negative Insert Geometry -FN -N -RN C30/40 /30 C30/40 /30 -R C30/40 /30 ositive Insert Geometry -UF -LF -F C30 To place an order, contact ennametal or your authorized ennametal distributor, or visit C40 C9125

7 BEYOND 3rd Step Select the Cutting Speed Low-Carbon (< 0,3% C) and Free-achining Steel Speed - m/min (sfm) Starting Conditions aterial Group grade 135 (450) 180 (600) 225 (800) 275 (900) 320 (1050) 360 (1200) 410 (1350) 455 (1500) 495 (1650) m/min sfm C30 C edium- and High-Carbon Steels (> 0,3% C) Speed - m/min (sfm) Starting Conditions aterial Group grade 135 (450) 180 (600) 225 (800) 275 (900) 320 (1050) 360 (1200) 410 (1350) 455 (1500) 495 (1650) m/min sfm C30 C Alloy Steels and Tool Steels ( 330 HB) ( 35 HRC) Speed - m/min (sfm) Starting Conditions aterial Group grade 135 (450) 180 (600) 225 (800) 275 (900) 320 (1050) 360 (1200) 410 (1350) 455 (1500) 495 (1650) m/min sfm C30 C Alloy Steels and Tool Steels ( HB) (36 48 HRC) Speed - m/min (sfm) Starting Conditions aterial Group grade 60 (200) 90 (300) 120 (400) 150 (500) 180 (600) 210 (700) 240 (800) 270 (900) 300 (1000) m/min sfm C30 C Ferritic, artensitic, and H Stainless Steels ( 330 HB) ( 35 HRC) Speed - m/min (sfm) Starting Conditions aterial Group grade 120 (400) 150 (500) 180 (600) 210 (700) 240 (800) 270 (900) 300 (1000) 330 (1100) 360 (1200) m/min sfm C30 C Ferritic, artensitic, and H Stainless Steels ( HB) (36 48 HRC) Speed - m/min (sfm) Starting Conditions aterial Group grade 105 (350) 135 (450) 165 (550) 195 (650) 225 (750) 255 (850) 285 (950) 315 (1050) 345 (1150) m/min sfm C30 C To place an order, contact ennametal or your authorized ennametal distributor, or visit B7

8 Stainless Steel Austenitic Stainless Steels 1st Step Select the Insert Geometry Negative Wiper Inserts Finishing Wiper feed rate (in/rev) -FW depth-of-cut (mm) depth-of-cut (inch) 2nd Step Select the Grade Cutting Condition heavily interrupted cut heavily interrupted cut varying depth-of-cut, casting, or forging skin smooth cut, pre-turned surface feed rate (mm) Negative Insert Geometry -FW C15 C15 C15 1st Step Select the Insert Geometry Negative Inserts ositive Inserts Roughing feed rate (in/rev) edium achining feed rate (in/rev) -R -F edium achining - -U Finishing depth-of-cut (mm) depth-of-cut (inch) -LF Finishing depth-of-cut (mm) depth-of-cut (inch) -FF feed rate (mm) feed rate (mm) 2nd Step Select the Grade Negative Insert Geometry ositive Insert Geometry -F -/-U -R -LF -F Cutting Condition heavily interrupted cut C15 C35 C35 C35 C35 lightly interrupted cut C15 C25 C25 C25 C25 varying depth-of-cut, casting, or forging skin C15 C15/25 C15/25 C15/25 C15/25 smooth cut, pre-turned surface C15 C15 C15 C15 C15 B8 To place an order, contact ennametal or your authorized ennametal distributor, or visit

9 BEYOND 3rd Step Select the Cutting Speed Austenitic Stainless Steel Speed - m/min (sfm) Starting Conditions aterial Group grade 90 (300) 135 (450) 180 (600) 225 (800) 270 (900) 315 (1050) 360 (1200) 405 (1350) 450 (1500) m/min sfm C C25 C Austenitic Stainless Steel Speed - m/min (sfm) Starting Conditions aterial Group grade 90 (300) 135 (450) 180 (600) 225 (800) 270 (900) 315 (1050) 360 (1200) 405 (1350) 450 (1500) m/min sfm C C25 C Austenitic Stainless Steel: Duplex (Ferritic and Austenitic ixture) Speed - m/min (sfm) Starting Conditions aterial Group grade 90 (300) 135 (450) 180 (600) 225 (800) 270 (900) 315 (1050) 360 (1200) 405 (1350) 450 (1500) m/min sfm C C25 C To place an order, contact ennametal or your authorized ennametal distributor, or visit B9

10 Cast Iron Gray and Ductile Irons 1st Step Select the Insert Geometry Negative Inserts ositive Inserts Roughing feed rate (in/rev) edium achining feed rate (in/rev)..a -F..W edium achining -UN -R depth-of-cut (mm) depth-of-cut (inch) -LF Finishing depth-of-cut (mm) depth-of-cut (inch) Finishing -FN feed rate (mm) feed rate (mm) * Geometry can be used in medium machining operations to reduce tool pressure in high-strength metals. 2nd Step Select the Grade Gray Iron Negative Insert Geometry ositive Insert Geometry -FN -UN(-R)..A -LF -F /..W Cutting Condition heavily interrupted cut C05 C20 C20 C20 C20 lightly interrupted cut C05 C15 C15 C20 C20 varying depth-of-cut, casting, or forging skin C05 C15 C15 C15 C20 smooth cut, pre-turned surface C05 C05 C05 C15 C20 Ductile Iron Negative Insert Geometry ositive Insert Geometry -FN -UN(-R)..A -LF -F /..W Cutting Condition heavily interrupted cut C05 C20 C20 C20 C20 lightly interrupted cut C05 C20 C20 C20 C20 varying depth-of-cut, casting, or forging skin C05 C15 C20 C15 C15 smooth cut, pre-turned surface C05 C15 C15 C15 C15 B10 To place an order, contact ennametal or your authorized ennametal distributor, or visit

11 BEYOND 3rd Step Select the Cutting Speed Gray Cast Iron Speed - m/min (sfm) Starting Conditions aterial Group grade 60 (200) 150 (500) 240 (800) 330 (1100) 420 (1400) 510 (1700) 600 (2000) 690 (2300) 780 (2600) m/min sfm C C C Ductile, Compacted Graphite & alleable Cast Irons (<80 SI tensile strength) Speed - m/min (sfm) Starting Conditions aterial Group grade 60 (200) 150 (500) 240 (800) 330 (1100) 420 (1400) 510 (1700) 600 (2000) 690 (2300) 780 (2600) m/min sfm C C C Ductile, Compacted Graphiote & alleable Cast irons (>80 SI tensile strength) Speed - m/min (sfm) Starting Conditions aterial Group grade 60 (200) 150 (500) 240 (800) 330 (1100) 420 (1400) 510 (1700) 600 (2000) 690 (2300) 780 (2600) m/min sfm C C C To place an order, contact ennametal or your authorized ennametal distributor, or visit B11

12 Steel Carbon, Alloy, and Tool Steels up to 450 HB (48 HRC) 1st Step Select the Insert Geometry Negative Inserts feed rate (in/rev) -RH Rouging Heavy -R Rouging edium depth-of-cut (mm) depth-of-cut (inch) -R Rouging ositive 2nd Step Select the Grade feed rate (mm) Negative Insert Geometry Cutting Condition -R -R -RH heavily interrupted cut C30/40 lightly interrupted cut /30 varying depth-of-cut, casting, or forging skin smooth cut, pre-turned surface /10 /10 Low-Carbon (<0.3% C) and Free-achining Steel Speed - m/min (sfm) Starting Conditions aterial Group grade 15 (50) 45 (150) 75 (250) 110 (350) 140 (450) 170 (550) 200 (650) 230 (750) 260 (850) m/min sfm C30 C B12 To place an order, contact ennametal or your authorized ennametal distributor, or visit

13 BY ENNAETAL Exceeding expectations. Surpassing excellence. ennametal, the trusted innovator in metalcutting technology, introduces a new era in tooling. Harnessing advanced science and exceptional experience, we ve gone more than a cut above and created Beyond, our next generation, ultra-performance tooling platform. This powerful collection delivers unheard of levels of productivity, efficiency, dependability, and profitability. And beyond. To take your operations to a new plateau of excellence, visit Turning l Threading l Grooving l Cut-Off l Holemaking l Indexable illing l Solid-Carbide End illing l Tooling Systems l Services 2008 ennametal Inc. l All rights reserved.

14 Grade Coating C Class C3 C4 Composition and Application Composition: An innovative, highly deformation resistant cobalt-enriched substrate with a specially designed adherent TCVD-TiCN-Al 2 O 3 coating. Application: The grade is for finishing to semi-finishing of most steels, ferritic, martensitic, and H stainless steels and cast irons. The specially designed substrate provides excellent combination of deformation resistance and insert edge strength. The new coating combined with a state-of-the-art post coat treatment provides high-productivity with long predictable tool life and superior workpiece surface finish. Standard designation N S H Wear resistance Toughness C3, C7 Composition: A specially engineered cobalt-enriched carbide grade with thick TCVD-TiCN-Al 2 O 3 coating for maximum wear resistance. Application: An excellent finishing to medium machining grade for a variety of workpiece materials including most steels, ferritic and martensitic stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. The smooth coating provides good resistance to edge build-up and microchipping and produces excellent surface finishes. N S H C2 C3, C6 C7 Composition: A tough cobalt-enriched carbide grade with a newly designed multi-layer TCVD-TiCN-Al 2 O 3 coating with superior interlayer adhesion. Application: This is the industry s best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance along with excellent insert edge strength. The coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimizes microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes. N S H C30 C5 C6 Composition: A newly engineered, tough cobalt-enriched carbide grade with an advanced multi-layered TiN-T-TiCN-Al 2 O 3 coating. Application: For medium to rough machining of all carbon, alloy, and stainless steels. The substrate design provides superior insert strength that is required for this application, and the multilayer coating adds wear resistance to the insert resulting in long tool life. N S H C40 C5 C6 Composition: A tough carbide grade with a moderately thick TiN-T-TiCN-Al 2 O 3 coating. Application: For heavy roughing of carbon, alloy, and stainless steels. The substrate-coating combination provides unbelievable toughness and operational security allowing high metal removal rates even in most demanding interrupted cuts. N S H C15 C2 C3 Composition: A patented, multi-layered TCVD-TiCN-Al 2 O 3 coated carbide grade. Application: An excellent finishing to medium machining grade for austenitic stainless steels at higher speeds and covers a broad range of steel applications in the range. C15 grade in combination with unique geometries have been designed to resist depth-of-cut notching and minimize burr formation in the machining of stainless steels. The post coat treatment reduces coating stresses, improves coating adhesion, minimizes microchipping and edge build-up, and improves workpiece finish. N S H B14 To place an order, contact ennametal or your authorized ennametal distributor, or visit

15 Technical Information Grade Coating C Class Composition and Application Standard designation Wear resistance Toughness C25 C1 C2 Composition: A multi-layered CVD coating comprised of TiN-T-TiCN-Al 2 O 3 layers over a tough, cobalt-enriched carbide substrate. Application: This CVD coated grade is designed for general purpose machining of austenitic stainless steels at moderate speeds and feeds. C25 inserts offer an extraordinary combination of toughness, built-up edge resistance, and wear resistance in stainless steel applications. N S H C35 C1 C2 Composition: A multi-layered TiN-T-TiCN-Al 2 O 3 CVD coating over a super-tough substrate. Application: The C35 grade is engineered to take on the most brutal cast stainless steel machining applications. The substrate withstands heavy interruptions, while the coating provides wear resistance needed for long tool life. The polished surface resists edge build-up, even at slow cutting speeds. C35 grade is available in insert sizes and geometries appropriate for heavy feeds and large depths-of-cut. N S H C05 C3 C4 Composition: A multi-layered coating with moderately thick TCVD TiCN-Al 2 O 3 layers over a highly deformation resistant carbide substrate. Application: The C05 grade is designed for high-speed machining of gray and ductile irons. The substrate and coating architecture together with CW5 post-coat treatment ensure a tremendous tool life advantage, especially when cutting higher tensile strength ductile and gray irons where workpiece size consistency and reliability of tool life are critical. This new ennametal grade is excellent both in straight and varied-depth cuts. N S H C15 C3 C4 Composition: A multi-layered coating with thick TCVD TiCN-Al 2 O 3 layers applied over a carbide substrate specifically engineered for cast irons. Application: The C15 grade delivers consistent performance in high-speed machining of gray and ductile irons. The substrate design permits the insert to stay in the cut for a long time at high speeds with minimum deformation. The thick CVD coating and post coat treatment provide superior wear resistance to the insert assuring long and consistent tool life. This new ennametal grade can be applied both in straight and lightly interrupted cuts. N S H C20 C2 C3 Composition: A specially toughened TCVD-TICN-Al 2 O 3 coating over a wear-resistant substrate. Application: The C20 grade is specifically engineered to maximize coating adhesion and edge strength making this grade ideal in wet interrupted cutting of gray and ductile irons. It can be used in a wide range of applications from finishing to roughing to maximize productivity wherever strength and reliability are needed. N S H To place an order, contact ennametal or your authorized ennametal distributor, or visit B15

16 enloc Inserts HOLEAING CNA CNG C30 C40 C15 C25 C35 C05 C15 C20 mm in mm in mm in mm in mm in CNA CNA431 12,70 1/2 12, ,76 3/16 0,4 1/64 5, v v v CNA CNA432 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v CNA CNA433 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v CNA CNA434 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v v CNA CNA542 15,88 5/8 16, ,35 1/4 0,8 1/32 6, v v v CNA CNA543 15,88 5/8 16, ,35 1/4 1,2 3/64 6, v v v CNA CNA544 15,88 5/8 16, ,35 1/4 1,6 1/16 6, v v v CNA CNA642 19,05 3/4 19, ,35 1/4 0,8 1/32 7, v v CNA CNA643 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v CNA CNA644 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v CNG CNG642 19,05 3/4 19, ,35 1/4 0,8 1/32 7, v v CNG CNG643 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v CNG CNG644 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v CNG CNG866 25, , ,53 3/8 2,4 3/32 9, v v INDEXABLE ILLING CNG-CT CNG120408CT CNG432CT 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v CNG120412CT CNG433CT 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v CNG120416CT CNG434CT 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v SOLID END ILLS CNG-FF CNG090304FF CNG321FF 9,53 3/8 9, ,18 1/8 0,4 1/64 3, v CNG090308FF CNG322FF 9,53 3/8 9, ,18 1/8 0,8 1/32 3, v CNG120404FF CNG431FF 12,70 1/2 12, ,76 3/16 0,4 1/64 5, v v CNG120408FF CNG432FF 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v CNG-FN TOOLING SYSTES CNG090304FN CNG321FN 9,53 3/8 9, ,18 1/8 0,4 1/64 3, v v CNG090308FN CNG322FN 9,53 3/8 9, ,18 1/8 0,8 1/32 3, v v CNG120404FN CNG431FN 12,70 1/2 12, ,76 3/16 0,4 1/64 5, v v v v CNG120408FN CNG432FN 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v v CNG120412FN CNG433FN 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v v CNG120416FN CNG434FN 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v v CNG-F INDEX B16 CNG120404F CNG431F 12,70 1/2 12, ,76 3/16 0,4 1/64 5, v CNG120408F CNG432F 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v CNG120412F CNG433F 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v : CNG120404F : CNG431F Insert grade: C15 To place an order, contact ennametal or your authorized ennametal distributor, or visit

17 enloc Inserts CNG-FW CNG-N CNG- CNG-W CNG-R mm in mm in mm in mm in mm in CNG120404FW CNG431FW 12,70 1/2 12, ,76 3/16 0,40 1/64 5, v v CNG120408FW CNG432FW 12,70 1/2 12, ,76 3/16 0,80 1/32 5, v v CNG120412FW CNG433FW 12,70 1/2 12, ,76 3/16 1,20 3/64 5, v v CNG090304N CNG321N 9,53 3/8 9, ,18 1/8 0,4 1/64 3, v v v CNG090308N CNG322N 9,53 3/8 9, ,18 1/8 0,8 1/32 3, v v v CNG090312N CNG323N 9,53 3/8 9, ,18 1/8 1,2 3/64 3, v CNG120404N CNG431N 12,70 1/2 12, ,76 3/16 0,4 1/64 5, v v v v CNG120408N CNG432N 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v v v CNG120412N CNG433N 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v v v CNG120416N CNG434N 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v CNG160608N CNG542N 15,88 5/8 16, ,35 1/4 0,8 1/32 6, v v v CNG160612N CNG543N 15,88 5/8 16, ,35 1/4 1,2 3/64 6, v v v v CNG160616N CNG544N 15,88 5/8 16, ,35 1/4 1,6 1/16 6, v v CNG190608N CNG642N 19,05 3/4 19, ,35 1/4 0,8 1/32 7, v v v CNG190612N CNG643N 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v v CNG190616N CNG644N 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v v CNG120408W CNG432W 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v CNG120412W CNG433W 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v CNG190612R CNG643R 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v CNG190616R CNG644R 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v CNG250924R CNG866R 25, , ,53 3/8 2,4 3/32 9, v v : CNG190612R : CNG643R Insert grade: C30 C40 C15 C25 C35 C05 C15 C20 CNG CNG322 9,53 3/8 9, ,18 1/8 0,8 1/32 3, v v CNG CNG431 12,70 1/2 12, ,76 3/16 0,4 1/64 5, v v v CNG CNG432 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v CNG CNG433 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v CNG CNG434 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v CNG CNG542 15,88 5/8 16, ,35 1/4 0,8 1/32 6, v v v CNG CNG543 15,88 5/8 16, ,35 1/4 1,2 3/64 6, v v v CNG CNG544 15,88 5/8 16, ,35 1/4 1,6 1/16 6, v v CNG CNG642 19,05 3/4 19, ,35 1/4 0,8 1/32 7, v v CNG CNG643 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v CNG CNG644 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v INDEX TOOLING SYSTES SOLID END ILLS INDEXABLE HOLEAING ILLING To place an order, contact ennametal or your authorized ennametal distributor, or visit B17

18 enloc Inserts HOLEAING CNG-RN CNG-R mm in mm in mm in mm in mm in CNG120408RN CNG432RN 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v v v CNG120412RN CNG433RN 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v v v CNG120416RN CNG434RN 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v v v v CNG160608RN CNG542RN 15,88 5/8 16, ,35 1/4 0,8 1/32 6, v v v CNG160612RN CNG543RN 15,88 5/8 16, ,35 1/4 1,2 3/64 6, v v v v CNG160616RN CNG544RN 15,88 5/8 16, ,35 1/4 1,6 1/16 6, v v v CNG190608RN CNG642RN 19,05 3/4 19, ,35 1/4 0,8 1/32 7, v v v CNG190612RN CNG643RN 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v v CNG190616RN CNG644RN 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v v v CNG190624RN CNG646RN 19,05 3/4 19, ,35 1/4 2,4 3/32 7, v v v C30 C40 C15 C25 C35 C05 C15 C20 INDEXABLE ILLING CNG120404R CNG431R 12,70 1/2 12, ,76 3/16 0,4 1/64 5, v v v v v CNG120408R CNG432R 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v v v v v v v v v CNG120412R CNG433R 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v v v v v v v v v CNG120416R CNG434R 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v v v v v v CNG160608R CNG542R 15,88 5/8 16, ,35 1/4 0,8 1/32 6, v v v v CNG160612R CNG543R 15,88 5/8 16, ,35 1/4 1,2 3/64 6, v v v v v v v v v v CNG160616R CNG544R 15,88 5/8 16, ,35 1/4 1,6 1/16 6, v v v v v CNG190612R CNG643R 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v v v v v v v v CNG190616R CNG644R 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v v v v v v v CNG-UN SOLID END ILLS TOOLING SYSTES INDEX CNG-U CNG120404UN CNG431UN 12,70 1/2 12, ,76 3/16 0,40 1/64 5, v v v CNG120408UN CNG432UN 12,70 1/2 12, ,76 3/16 0,80 1/32 5, v v v CNG120412UN CNG433UN 12,70 1/2 12, ,76 3/16 1,20 3/64 5, v v v CNG120416UN CNG434UN 12,70 1/2 12, ,76 3/16 1,60 1/16 5, v v v CNG160608UN CNG542UN 15,88 5/8 16, ,35 1/4 0,80 1/32 6, v v v CNG160612UN CNG543UN 15,88 5/8 16, ,35 1/4 1,20 3/64 6, v v v CNG160616UN CNG544UN 15,88 5/8 16, ,35 1/4 1,60 1/16 6, v v v CNG190608UN CNG642UN 19,05 3/4 19, ,35 1/4 0,80 1/32 7, v v v CNG190612UN CNG643UN 19,05 3/4 19, ,35 1/4 1,20 3/64 7, v v v CNG190616UN CNG644UN 19,05 3/4 19, ,35 1/4 1,60 1/16 7, v v v CNG120404U CNG431U 12,70 1/2 12, ,76 3/16 0,40 1/64 5, v v CNG120408U CNG432U 12,70 1/2 12, ,76 3/16 0,80 1/32 5, v v v CNG120412U CNG433U 12,70 1/2 12, ,76 3/16 1,20 3/64 5, v v v CNG160608U CNG542U 15,88 5/8 16, ,35 1/4 0,80 1/32 6, v v v CNG160612U CNG543U 15,88 5/8 16, ,35 1/4 1,20 3/64 6, v v v CNG190608U CNG642U 19,05 3/4 19, ,35 1/4 0,80 1/32 7, v v CNG190612U CNG643U 19,05 3/4 19, ,35 1/4 1,20 3/64 7, v v v CNG190616U CNG644U 19,05 3/4 19, ,35 1/4 1,60 1/16 7, v v v : CNG120404U : CNG431U Insert grade: C15 B18 To place an order, contact ennametal or your authorized ennametal distributor, or visit

19 enloc Inserts CN-RH CN-R CN-R CN- mm in mm in mm in mm in mm in CN190612RH CN643RH 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v v CN190616RH CN644RH 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v v v CN190624RH CN646RH 19,05 3/4 19, ,35 1/4 2,4 3/32 7, v v v CN250924RH CN866RH 25, , ,53 3/8 2,4 3/32 9, v v v v CN120408R CN432R 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v CN120412R CN433R 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v v CN120416R CN434R 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v v CN160612R CN543R 15,88 5/8 16, ,35 1/4 1,2 3/64 6, v v v CN160616R CN544R 15,88 5/8 16, ,35 1/4 1,6 1/16 6, v v v CN160624R CN546R 15,88 5/8 16, ,35 1/4 2,4 3/32 6, v v CN190612R CN643R 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v v CN190616R CN644R 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v v v CN190624R CN646R 19,05 3/4 19, ,35 1/4 2,4 3/32 7, v v CN250924R CN866R 25, , ,53 3/8 2,4 3/32 9, v v v v C30 C40 C15 C25 C35 C05 C15 C20 CN120408R CN432R 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v v v v v CN120412R CN433R 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v v v v v v CN120416R CN434R 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v v v v CN160608R CN542R 15,88 5/8 16, ,35 1/4 0,8 1/32 6, v v CN160612R CN543R 15,88 5/8 16, ,35 1/4 1,2 3/64 6, v v v v v v v v CN160616R CN544R 15,88 5/8 16, ,35 1/4 1,6 1/16 6, v v v v v v v CN190612R CN643R 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v v v v CN190616R CN644R 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v v v v v v CN190624R CN646R 19,05 3/4 19, ,35 1/4 2,4 3/32 7, v v v CN250924R CN866R 25, , ,53 3/8 2,4 3/32 9, v v : CN : CN431 Insert grade: CN CN431 12,70 1/2 12, ,76 3/16 0,4 1/64 5, v CN CN432 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v CN CN433 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v INDEX TOOLING SYSTES SOLID END ILLS INDEXABLE HOLEAING ILLING To place an order, contact ennametal or your authorized ennametal distributor, or visit B19

20 enloc Inserts HOLEAING DNA DNG-CT mm in mm in mm in mm in mm in DNA DNA332 9,53 3/8 11, ,76 3/16 0,8 1/32 3, v v DNA DNA333 9,53 3/8 11, ,76 3/16 1,2 3/64 3, v DNG110408CT DNG332CT 9,53 3/8 11, ,76 3/16 0,8 1/32 3, v v DNG150404CT DNG431CT 12,70 1/2 15, ,76 3/16 0,4 1/64 5, v v v DNG150408CT DNG432CT 12,70 1/2 15, ,76 3/16 0,8 1/32 5, v v v DNG150412CT DNG433CT 12,70 1/2 15, ,76 3/16 1,2 3/64 5, v DNG150604CT DNG441CT 12,70 1/2 15, ,35 1/4 0, , v DNG150608CT DNG442CT 12,70 1/2 15, ,35 1/4 0, , v v v DNG150612CT DNG443CT 12,70 1/2 15, ,35 1/4 1, , v v v C30 C40 C15 C25 C35 C05 C15 C20 DNA DNA432 12,70 1/2 15, ,76 3/16 0,8 1/32 5, v v v DNA DNA433 12,70 1/2 15, ,76 3/16 1,2 3/64 5, v v v DNA DNA434 12,70 1/2 15, ,76 3/16 1,6 1/16 5, v v DNA DNA442 12,70 1/2 15, ,35 1/4 0,4 1/64 5, v v v DNA DNA443 12,70 1/2 15, ,35 1/4 0,8 1/32 5, v v v DNA DNA444 12,70 1/2 15, ,35 1/4 1,2 3/64 5, v INDEXABLE ILLING DNG-FF DNG110404FF DNG331FF 9,53 3/8 11, ,76 3/16 0,4 1/64 3, v v DNG110408FF DNG332FF 9,53 3/8 11, ,76 3/16 0,8 1/32 3, v v DNG150404FF DNG431FF 12,70 1/2 15, ,76 3/16 0,4 1/64 5, v v DNG150408FF DNG432FF 12,70 1/2 15, ,76 3/16 0,8 1/32 5, v v DNG150604FF DNG441FF 12,70 1/2 15, ,35 1/4 0,4 1/64 5, v v DNG150608FF DNG442FF 12,70 1/2 15, ,35 1/4 0,8 1/32 5, v v SOLID END ILLS TOOLING SYSTES INDEX DNG-FN DNG-F B20 DNG110404FN DNG331FN 9,53 3/8 11, ,76 3/16 0,4 1/64 3, v v v v DNG110408FN DNG332FN 9,53 3/8 11, ,76 3/16 0,8 1/32 3, v v v v DNG110412FN DNG333FN 9,53 3/8 11, ,76 3/16 1,2 3/64 3, v v v DNG150404FN DNG431FN 12,70 1/2 15, ,76 3/16 0,4 1/64 5, v v v v DNG150408FN DNG432FN 12,70 1/2 15, ,76 3/16 0,8 1/32 5, v v v v DNG150412FN DNG433FN 12,70 1/2 15, ,76 3/16 1,2 3/64 5, v v v DNG150604FN DNG441FN 12,70 1/2 15, ,35 1/4 0,4 1/64 5, v v v v DNG150608FN DNG442FN 12,70 1/2 15, ,35 1/4 0,8 1/32 5, v v v v DNG150612FN DNG443FN 12,70 1/2 15, ,35 1/4 1,2 3/64 5, v v v v DNG110404F DNG331F 9,53 3/8 11, ,76 3/16 0,4 1/64 3, v DNG110408F DNG332F 9,53 3/8 11, ,76 3/16 0,8 1/32 3, v DNG150404F DNG431F 12,70 1/2 15, ,76 3/16 0,4 1/64 5, v DNG150408F DNG432F 12,70 1/2 15, ,76 3/16 0,8 1/32 5, v DNG150412F DNG433F 12,70 1/2 15, ,76 3/16 1,2 3/64 5, v DNG150604F DNG441F 12,70 1/2 15, ,35 1/4 0,4 1/64 5, v DNG150608F DNG442F 12,70 1/2 15, ,35 1/4 0,8 1/32 5, v DNG150612F DNG443F 12,70 1/2 15, ,35 1/4 1,2 3/64 5, v : DNG110404F : DNG331F Insert grade: C15 To place an order, contact ennametal or your authorized ennametal distributor, or visit

21 enloc Inserts DNG-FW DNG-N DNG- DNG-W mm in mm in mm in mm in mm in DNG110404FW DNG331FW 9,53 3/8 11, ,76 3/16 0,4 1/64 3, v v DNG110408FW DNG332FW 9,53 3/8 11, ,76 3/16 0,8 1/32 3, v v DNG150404FW DNG431FW 12,70 1/2 15, ,76 3/16 0,4 1/64 5, v v DNG150408FW DNG432FW 12,70 1/2 15, ,76 3/16 0,8 1/32 5, v v DNG150604FW DNG441FW 12,70 1/2 15, ,35 1/4 0,4 1/64 5, v v DNG150608FW DNG442FW 12,70 1/2 15, ,35 1/4 0,8 1/32 5, v v DNG110404N DNG331N 9,53 3/8 11, ,76 3/16 0,4 1/64 3, v v v v DNG110408N DNG332N 9,53 3/8 11, ,76 3/16 0,8 1/32 3, v v v v DNG110412N DNG333N 9,53 3/8 11, ,76 3/16 1,2 3/64 3, v v DNG150404N DNG431N 12,70 1/2 15, ,76 3/16 0,4 1/64 5, v v v v DNG150408N DNG432N 12,70 1/2 15, ,76 3/16 0,8 1/32 5, v v v v v DNG150412N DNG433N 12,70 1/2 15, ,76 3/16 1,2 3/64 5, v v v v DNG150416N DNG434N 12,70 1/2 15, ,76 3/16 1,6 1/16 5, v v DNG150604N DNG441N 12,70 1/2 15, ,35 1/4 0,4 1/64 5, v v v v DNG150608N DNG442N 12,70 1/2 15, ,35 1/4 0,8 1/32 5, v v v v v DNG150612N DNG443N 12,70 1/2 15, ,35 1/4 1,2 3/64 5, v v v v DNG150616N DNG444N 12,70 1/2 15, ,35 1/4 1,6 1/16 5, v DNG190612N DNG543N 15,88 5/8 19, ,35 1/4 1,2 3/64 6, v v DNG150408W DNG432W 12,70 1/2 15, ,76 3/16 0,8 1/32 5, v v v DNG150412W DNG433W 12,70 1/2 15, ,76 3/16 1,2 3/64 5, v v v DNG150608W DNG442W 12,70 1/2 15, ,35 1/4 0,8 1/32 5, v v v DNG150612W DNG443W 12,70 1/2 15, ,35 1/4 1,2 3/64 5, v v v : DNG150408W : DNG432W Insert grade: C30 C40 C15 C25 C35 C05 C15 C20 DNG DNG332 9,53 3/8 11, ,76 3/16 0,8 1/32 3, v v DNG DNG333 9,53 3/8 11, ,76 3/16 1,2 3/64 3, v v DNG DNG431 12,70 1/2 15, ,76 3/16 0,4 1/64 5, v v v DNG DNG432 12,70 1/2 15, ,76 3/16 0,8 1/32 5, v v v DNG DNG433 12,70 1/2 15, ,76 3/16 1,2 3/64 5, v v DNG DNG441 12,70 1/2 15, ,35 1/4 0,4 1/64 5, v v v DNG DNG442 12,70 1/2 15, ,35 1/4 0,8 1/32 5, v v v DNG DNG443 12,70 1/2 15, ,35 1/4 1,2 3/64 5, v v INDEX TOOLING SYSTES SOLID END ILLS INDEXABLE HOLEAING ILLING To place an order, contact ennametal or your authorized ennametal distributor, or visit B21

22 enloc Inserts HOLEAING DNG-R mm in mm in mm in mm in mm in DNG190608R DNG542R 15,88 5/8 19, ,35 1/4 0,8 1/32 6, v DNG190612R DNG543R 15,88 5/8 19, ,35 1/4 1,2 3/64 6, v C30 C40 C15 C25 C35 C05 C15 C20 DNG-RN DNG150408RN DNG432RN 12,70 1/2 15, ,76 3/16 0,8 1/32 5, v v v v DNG150412RN DNG433RN 12,70 1/2 15, ,76 3/16 1,2 3/64 5, v v v DNG150416RN DNG434RN 12,70 1/2 15, ,76 3/16 1,6 1/16 5, v v DNG150608RN DNG442RN 12,70 1/2 15, ,35 1/4 0,8 1/32 5, v v v v v DNG150612RN DNG443RN 12,70 1/2 15, ,35 1/4 1,2 3/64 5, v v v v v DNG150616RN DNG444RN 12,70 1/2 15, ,35 1/4 1,6 1/16 5, v v v v DNG190608RN DNG542RN 15,88 5/8 19, ,35 1/4 0,8 1/32 6, v v v DNG190612RN DNG543RN 15,88 5/8 19, ,35 1/4 1,2 3/64 6, v v v INDEXABLE ILLING SOLID END ILLS DNG-R DNG110408R DNG332R 9,53 3/8 11, ,76 3/16 0,8 1/32 3, v v v v DNG110412R DNG333R 9,53 3/8 11, ,76 3/16 1,2 3/64 3, v v v v DNG150408R DNG432R 12,70 1/2 15, ,76 3/16 0,8 1/32 5, v v v v v v v v v v DNG150412R DNG433R 12,70 1/2 15, ,76 3/16 1,2 3/64 5, v v v v v v v v v DNG150416R DNG434R 12,70 1/2 15, ,76 3/16 1,6 1/16 5, v DNG150608R DNG442R 12,70 1/2 15, ,35 1/4 0,8 1/32 5, v v v v v v v v v v v DNG150612R DNG443R 12,70 1/2 15, ,35 1/4 1,2 3/64 5, v v v v v v v v v v v DNG150616R DNG444R 12,70 1/2 15, ,35 1/4 1,6 1/16 5, v v v v TOOLING SYSTES DNG-UN DNG110408UN DNG332UN 9,53 3/8 11, ,76 3/16 0,8 1/32 3, v v v DNG110412UN DNG333UN 9,53 3/8 11, ,76 3/16 1,2 3/64 3, v v v DNG150408UN DNG432UN 12,70 1/2 15, ,76 3/16 0,8 1/32 5, v v v DNG150412UN DNG433UN 12,70 1/2 15, ,76 3/16 1,2 3/64 5, v v v DNG150416UN DNG434UN 12,70 1/2 15, ,76 3/16 1,6 1/16 5, v v DNG150608UN DNG442UN 12,70 1/2 15, ,35 1/4 0,8 1/32 5, v v v DNG150612UN DNG443UN 12,70 1/2 15, ,35 1/4 1,2 3/64 5, v v v DNG150616UN DNG444UN 12,70 1/2 15, ,35 1/4 1,6 1/16 5, v v INDEX : DNG110408UN : DNG332UN Insert grade: C15 B22 To place an order, contact ennametal or your authorized ennametal distributor, or visit

23 enloc Inserts DNG-U DN-R DN-R DN- RNA To place an order, contact ennametal or your authorized ennametal distributor, or visit C30 C40 C15 C25 C35 C05 C15 C20 mm in mm in mm in mm in mm in DNG110408U DNG332U 9,53 3/8 11, ,76 3/16 0,8 1/32 3, v v DNG110412U DNG333U 9,53 3/8 11, ,76 3/16 1,2 3/64 3, v v : RNA : RNA43 Insert grade: C05 DNG150404U DNG431U 12,70 1/2 15, ,76 3/16 0,4 1/64 5, v v DNG150408U DNG432U 12,70 1/2 15, ,76 3/16 0,8 1/32 5, v v v DNG150412U DNG433U 12,70 1/2 15, ,76 3/16 1,2 3/64 5, v v v DNG150604U DNG441U 12,70 1/2 15, ,35 1/4 0,4 1/64 5, v v DNG150608U DNG442U 12,70 1/2 15, ,35 1/4 0,8 1/32 5, v v v DNG150612U DNG443U 12,70 1/2 15, ,35 1/4 1,2 3/64 5, v v v DN150408R DN432R 12,70 1/2 15, ,76 3/16 0,8 1/32 5, v v DN150412R DN433R 12,70 1/2 15, ,76 3/16 1,2 3/64 5, v v DN150416R DN434R 12,70 1/2 15, ,76 3/16 1,6 1/16 5, v DN150608R DN442R 12,70 1/2 15, ,35 1/4 0,8 1/32 5, v v v DN150612R DN443R 12,70 1/2 15, ,35 1/4 1,2 3/64 5, v v v v DN150616R DN444R 12,70 1/2 15, ,35 1/4 1,6 1/16 5, v v v DN150608R DN442R 12,70 1/2 15, ,35 1/4 0,8 1/32 5, v v v v DN150612R DN443R 12,70 1/2 15, ,35 1/4 1,2 3/64 5, v v v v DN150616R DN444R 12,70 1/2 15, ,35 1/4 1,6 1/16 5, v v v DN DN332 9,53 3/8 11, ,76 3/16 0,8 1/32 3, v DN DN431 12,70 1/2 15, ,76 3/16 0,4 1/64 5, v DN DN432 12,70 1/2 15, ,76 3/16 0,8 1/32 5, v v DN DN433 12,70 1/2 15, ,76 3/16 1,2 3/64 5, v C30 C40 C15 C25 C35 C05 C15 C20 RNA RNA43 12,70 1/2 4,76 3/16 5, v v v B23 INDEX TOOLING SYSTES SOLID END ILLS INDEXABLE HOLEAING ILLING

24 enloc Inserts RNG mm in mm in mm in mm in mm in RNG RNG64 19,05 3/4 6,35 1/4 7, v v RNG RNG86 25,40 1 9,53 3/8 9, v v C30 C40 C15 C25 C35 C05 C15 C20 RNG-RN HOLEAING RNG090300RN RNG32RN 9,53 3/8 3,18 1/8 3, v v RNG120400RN RNG43RN 12,70 1/2 4,76 3/16 5, v v v RNG150600RN RNG54RN 15,88 5/8 6,35 1/4 6, v v v RNG190600RN RNG64RN 19,05 3/4 6,35 1/4 7, v v v RNG190900RN RNG66RN 19,05 3/4 9,52 3/8 7, v RNG250900RN RNG86RN 25,40 1 9,53 3/8 9, v v v RNG-UN RNG120400UN RNG43UN 12,70 1/2 4,76 3/16 5, v v v INDEXABLE ILLING SOLID END ILLS TOOLING SYSTES SNA SNG C30 C40 C15 C25 C35 C05 C15 C20 SNA SNA432 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v SNA SNA433 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v SNA SNA434 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v v SNA SNA542 15,88 5/8 15, ,35 1/4 0,8 1/32 6, v SNA SNA543 15,88 5/8 15, ,35 1/4 1,2 3/64 6, v v v SNA SNA544 15,88 5/8 15, ,35 1/4 1,6 1/16 6, v v SNA SNA643 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v SNA SNA644 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v v SNG SNG643 19,05 3/4 19, ,35 1/4 1,20 3/64 7, v v SNG SNG644 19,05 3/4 19, ,35 1/4 1,60 1/16 7, v v SNG SNG866 25, , ,53 3/8 2,40 3/32 9, v v INDEX : SNA : SNA643 Insert grade: C40 B24 To place an order, contact ennametal or your authorized ennametal distributor, or visit

25 enloc Inserts SNG-FF SNG-FN SNG-F SNG-FW SNG-N mm in mm in mm in mm in mm in SNG090304FF SNG321FF 9,53 3/8 9, ,18 1/8 0,4 1/64 3, v v SNG090308FF SNG322FF 9,53 3/8 9, ,18 1/8 0,8 1/32 3, v v SNG120404FF SNG431FF 12,70 1/2 12, ,76 3/16 0,4 1/64 5, v SNG120408FF SNG432FF 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v C30 C40 C15 C25 C35 C05 C15 C20 SNG090304FN SNG321FN 9,53 3/8 9, ,18 1/8 0,4 1/64 3, v v v SNG090308FN SNG322FN 9,53 3/8 9, ,18 1/8 0,8 1/32 3, v v v SNG120404FN SNG431FN 12,70 1/2 12, ,76 3/16 0,4 1/64 5, v v v SNG120408FN SNG432FN 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v v SNG120412FN SNG433FN 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v SNG120416FN SNG434FN 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v SNG120404F SNG431F 12,70 1/2 12, ,76 3/16 0,4 1/64 5, v SNG120408F SNG432F 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v SNG120412F SNG433F 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v SNG120408FW SNG432FW 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v SNG120412FW SNG433FW 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v SNG090304N SNG321N 9,53 3/8 9, ,18 1/8 0,4 1/64 3, v SNG090308N SNG322N 9,53 3/8 9, ,18 1/8 0,8 1/32 3, v v v SNG090312N SNG323N 9,53 3/8 9, ,18 1/8 1,2 3/64 3, v v SNG120404N SNG431N 12,70 1/2 12, ,76 3/16 0,4 1/64 5, v v v SNG120408N SNG432N 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v v SNG120412N SNG433N 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v v SNG120416N SNG434N 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v v v SNG150612N SNG543N 15,88 5/8 15, ,35 1/4 1,2 3/64 6, v v v SNG150616N SNG544N 15,88 5/8 15, ,35 1/4 1,6 1/16 6, v SNG190612N SNG643N 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v SNG190616N SNG644N 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v : SNG090304N : SNG321N Insert grade: INDEX TOOLING SYSTES SOLID END ILLS INDEXABLE HOLEAING ILLING To place an order, contact ennametal or your authorized ennametal distributor, or visit B25

26 enloc Inserts HOLEAING SNG- mm in mm in mm in mm in mm in C30 C40 C15 C25 C35 C05 C15 C20 SNG SNG432 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v SNG SNG433 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v SNG SNG434 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v SNG SNG542 15,88 5/8 15, ,35 1/4 0,8 1/32 6, v v SNG SNG543 15,88 5/8 15, ,35 1/4 1,2 3/64 6, v v SNG SNG544 15,88 5/8 15, ,35 1/4 1,6 1/16 6, v SNG SNG643 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v SNG SNG644 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v SNG-W SNG120408W SNG432W 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v SNG120412W SNG433W 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v SNG-R INDEXABLE ILLING SNG190612R SNG643R 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v SNG190616R SNG644R 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v SNG250924R SNG866R 25, , ,53 3/8 2,4 3/32 9, v v SNG-RN SOLID END ILLS TOOLING SYSTES SNG090412RN SNG333RN 9,53 3/8 9, ,76 3/16 1,2 3/64 3, v SNG120408RN SNG432RN 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v v SNG120412RN SNG433RN 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v v SNG120416RN SNG434RN 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v v v SNG150608RN SNG542RN 15,88 5/8 15, ,35 1/4 0,8 1/32 6, v v SNG150612RN SNG543RN 15,88 5/8 15, ,35 1/4 1,2 3/64 6, v v v v SNG150616RN SNG544RN 15,88 5/8 15, ,35 1/4 1,6 1/16 6, v v v v SNG190608RN SNG642RN 19,05 3/4 19, ,35 1/4 0,8 1/32 7, v v SNG190612RN SNG643RN 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v v SNG190616RN SNG644RN 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v v v SNG190624RN SNG646RN 19,05 3/4 19, ,35 1/4 2,4 3/32 7, v v INDEX : SNG090412RN : SNG333RN Insert grade: B26 To place an order, contact ennametal or your authorized ennametal distributor, or visit

27 enloc Inserts SNG-R SNG-UN SNG-U SN-RH SNG120416R SNG434R 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v SNG150612R SNG543R 15,88 5/8 15, ,35 1/4 1,2 3/64 6, v v v v v v v v v C30 C40 C15 C25 C35 C05 C15 C20 mm in mm in mm in mm in mm in SNG120408R SNG432R 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v v v v v v v v v SNG120412R SNG433R 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v v v v v v v v v SNG150616R SNG544R 15,88 5/8 15, ,35 1/4 1,6 1/16 6, v v v v v v SNG190612R SNG643R 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v v v v v v SNG190616R SNG644R 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v v v v v SNG120408UN SNG432UN 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v SNG120412UN SNG433UN 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v SNG120416UN SNG434UN 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v v SNG150612UN SNG543UN 15,88 5/8 15, ,35 1/4 1,2 3/64 6, v v v SNG150616UN SNG544UN 15,88 5/8 15, ,35 1/4 1,6 1/16 6, v v v SNG190612UN SNG643UN 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v SNG190616UN SNG644UN 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v v SNG120408U SNG432U 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v SNG120412U SNG433U 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v SNG120416U SNG434U 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v v SNG150612U SNG543U 15,88 5/8 15, ,35 1/4 1,2 3/64 6, v v v SNG190612U SNG643U 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v SN190612RH SN643RH 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v SN190616RH SN644RH 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v v v SN190624RH SN646RH 19,05 3/4 19, ,35 1/4 2,4 3/32 7, v v v v SN250724RH SN856RH 25, , ,94 5/16 2,4 3/32 9, v v v v SN250732RH SN858RH 25, , ,94 5/16 3,2 1/8 9, v v SN250924RH SN866RH 25, , ,53 3/8 2,4 3/32 9, v v v v : SN190612RH : SN643RH Insert grade: INDEX TOOLING SYSTES SOLID END ILLS INDEXABLE HOLEAING ILLING To place an order, contact ennametal or your authorized ennametal distributor, or visit B27

28 enloc Inserts TOOLING SYSTES HOLEAING INDEXABLE ILLING SN-R SN-R mm in mm in mm in mm in mm in SN120408R SN432R 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v SN120412R SN433R 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v SN120416R SN434R 12,70 1/2 12, ,76 3/16 1,6 1/16 5, v v SN150612R SN543R 15,88 5/8 15, ,35 1/4 1,2 3/64 6, v v SN150616R SN544R 15,88 5/8 15, ,35 1/4 1,6 1/16 6, v v v SN190612R SN643R 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v v SN190616R SN644R 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v v SN190624R SN646R 19,05 3/4 19, ,35 1/4 2,4 3/32 7, v v SN250724R SN856R 25, , ,94 5/16 2,4 3/32 9, v v v SN250924R SN866R 25, , ,53 3/8 2,4 3/32 9, v v v v C30 C40 C15 C25 C35 C05 C15 C20 SN120408R SN432R 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v v v SN120412R SN433R 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v v SN150612R SN543R 15,88 5/8 15, ,35 1/4 1,2 3/64 6, v v v v SN150616R SN544R 15,88 5/8 15, ,35 1/4 1,6 1/16 6, v v SN190612R SN643R 19,05 3/4 19, ,35 1/4 1,2 3/64 7, v v v v SN190616R SN644R 19,05 3/4 19, ,35 1/4 1,6 1/16 7, v v v SN190624R SN646R 19,05 3/4 19, ,35 1/4 2,4 3/32 7, v v SN250724R SN856R 25, , ,94 5/16 2,4 3/32 9, v v v SN250924R SN866R 25, , ,53 3/8 2,4 3/32 9, v v SOLID END ILLS SN- SN SN432 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v INDEX : SN : SN432 Insert grade: B28 To place an order, contact ennametal or your authorized ennametal distributor, or visit

29 enloc Inserts TNA TNG TNG-CT TNG-FF TNG-FN TNG-F mm in mm in mm in mm in mm in TNA TNA332 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v v TNA TNA333 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v v v C30 C40 C15 C25 C35 C05 C15 C20 TNA TNA334 9,53 3/8 16, ,76 3/16 1,6 1/16 3, v v TNA TNA432 12,70 1/2 22, ,76 3/16 0,8 1/32 5, v v v TNA TNA433 12,70 1/2 22, ,76 3/16 1,2 3/64 5, v v v TNA TNA434 12,70 1/2 22, ,76 3/16 1,6 1/16 5, v v TNA TNA544 15,88 5/8 27, ,35 1/4 1,6 1/16 6, v v TNG TNG666 19,05 3/4 33, ,53 3/8 2,4 3/32 7, v v TNG220408CT TNG432CT 12,70 1/2 22, ,76 3/16 0,8 1/32 5, v v TNG220412CT TNG433CT 12,70 1/2 22, ,76 3/16 1,2 3/64 5, v v TNG160404FF TNG331FF 9,53 3/8 16, ,76 3/16 0,4 1/64 3, v v TNG160408FF TNG332FF 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v TNG110304FN TNG221FN 6,35 1/4 11, ,18 1/8 0,4 1/64 2, v v v TNG110308FN TNG222FN 6,35 1/4 11, ,18 1/8 0,8 1/32 2, v v v TNG160404FN TNG331FN 9,53 3/8 16, ,76 3/16 0,4 1/64 3, v v v v TNG160408FN TNG332FN 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v v v TNG160412FN TNG333FN 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v v v v TNG220404FN TNG431FN 12,70 1/2 22, ,76 3/16 0,4 1/64 5, v v v TNG220408FN TNG432FN 12,70 1/2 22, ,76 3/16 0,8 1/32 5, v v v TNG220412FN TNG433FN 12,70 1/2 22, ,76 3/16 1,2 3/64 5, v v TNG160404F TNG331F 9,53 3/8 16, ,76 3/16 0,4 1/64 3, v TNG160408F TNG332F 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v TNG160412F TNG333F 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v TNG220404F TNG431F 12,70 1/2 22, ,76 3/16 0,4 1/64 5, v : TNG160404F : TNG331F Insert grade: C15 TNG220408F TNG432F 12,70 1/2 22, ,76 3/16 0,8 1/32 5, v INDEX TOOLING SYSTES SOLID END ILLS INDEXABLE HOLEAING ILLING To place an order, contact ennametal or your authorized ennametal distributor, or visit B29

30 enloc Inserts TNG-FW mm in mm in mm in mm in mm in TNG160404FW TNG331FW 9,53 3/8 16, ,76 3/16 0,4 1/64 3, v v TNG160408FW TNG332FW 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v TNG160412FW TNG333FW 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v v C30 C40 C15 C25 C35 C05 C15 C20 TNG-N HOLEAING TNG160404N TNG331N 9,53 3/8 16, ,76 3/16 0,4 1/64 3, v v v v TNG160408N TNG332N 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v v v TNG160412N TNG333N 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v v v v v TNG220404N TNG431N 12,70 1/2 22, ,76 3/16 0,4 1/64 5, v v v TNG220408N TNG432N 12,70 1/2 22, ,76 3/16 0,8 1/32 5, v v v v TNG220412N TNG433N 12,70 1/2 22, ,76 3/16 1,2 3/64 5, v v v v TNG220416N TNG434N 12,70 1/2 22, ,76 3/16 1,6 1/16 5, v INDEXABLE ILLING SOLID END ILLS TNG- TNG-W TNG TNG331 9,53 3/8 16, ,76 3/16 0,4 1/64 3, v v v TNG TNG332 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v v TNG TNG333 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v v TNG TNG432 12,70 1/2 22, ,76 3/16 0,8 1/32 5, v v TNG TNG433 12,70 1/2 22, ,76 3/16 1,2 3/64 5, v v TNG TNG434 12,70 1/2 22, ,76 3/16 1,6 1/16 5, v TNG160408W TNG332W 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v v TNG160412W TNG333W 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v v v TOOLING SYSTES TNG-R TNG330924R TNG666R 19,05 3/4 32, ,53 3/8 2,4 3/32 7, v v INDEX : TNG330924R : TNG666R Insert grade: C40 B30 To place an order, contact ennametal or your authorized ennametal distributor, or visit

31 enloc Inserts TNG-RN TNG-R TNG-UN TNG-U mm in mm in mm in mm in mm in TNG160408RN TNG332RN 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v v TNG160412RN TNG333RN 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v v v TNG220408RN TNG432RN 12,70 1/2 22, ,76 3/16 0,8 1/32 5, v v v v TNG220412RN TNG433RN 12,70 1/2 22, ,76 3/16 1,2 3/64 5, v v v v TNG220416RN TNG434RN 12,70 1/2 22, ,76 3/16 1,6 1/16 5, v v TNG270608RN TNG542RN 15,88 5/8 27, ,35 1/4 0,8 1/32 6, v v v TNG270612RN TNG543RN 15,88 5/8 27, ,35 1/4 1,2 3/64 6, v v v v TNG270616RN TNG544RN 15,88 5/8 27, ,35 1/4 1,6 1/16 6, v v v TNG330924RN TNG666RN 19,05 3/4 33, ,53 3/8 2,4 3/32 7, v v v v C30 C40 C15 C25 C35 C05 C15 C20 TNG160408R TNG332R 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v v v v v v v v TNG160412R TNG333R 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v v v v v v TNG160416R TNG334R 9,53 3/8 16, ,76 3/16 1,6 1/16 3, v v v TNG220408R TNG432R 12,70 1/2 22, ,76 3/16 0,8 1/32 5, v v v v v v v v TNG220412R TNG433R 12,70 1/2 22, ,76 3/16 1,2 3/64 5, v v v v v v v v TNG220416R TNG434R 12,70 1/2 22, ,76 3/16 1,6 1/16 5, v v v v TNG220432R TNG438R 12,70 1/2 22, ,76 3/16 3,2 1/8 5, v v v TNG270612R TNG543R 15,88 5/8 27, ,35 1/4 1,2 3/64 6, v v v v v v TNG270616R TNG544R 15,88 5/8 27, ,35 1/4 1,6 1/16 6, v v v v v TNG330924R TNG666R 19,05 3/4 33, ,53 3/8 2,4 3/32 7, v v v v TNG160408UN TNG332UN 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v v TNG160412UN TNG333UN 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v v v TNG160416UN TNG334UN 9,53 3/8 16, ,76 3/16 1,6 1/16 3, v v v TNG220408UN TNG432UN 12,70 1/2 22, ,76 3/16 0,8 1/32 5, v v v TNG220412UN TNG433UN 12,70 1/2 22, ,76 3/16 1,2 3/64 5, v v v TNG220416UN TNG434UN 12,70 1/2 22, ,76 3/16 1,6 1/16 5, v v v TNG160404U TNG331U 9,53 3/8 16, ,76 3/16 0,4 1/64 3, v v TNG160408U TNG332U 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v TNG160412U TNG333U 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v v TNG220408U TNG432U 12,70 1/2 22, ,76 3/16 0,8 1/32 5, v v v TNG220412U TNG433U 12,70 1/2 22, ,76 3/16 1,2 3/64 5, v v v : TNG160404U : TNG331U Insert grade: C15 INDEX TOOLING SYSTES SOLID END ILLS INDEXABLE HOLEAING ILLING To place an order, contact ennametal or your authorized ennametal distributor, or visit B31

32 enloc Inserts TOOLING SYSTES HOLEAING INDEXABLE ILLING SOLID END ILLS TN-R mm in mm in mm in mm in mm in TN160408R TN332R 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v v TN160412R TN333R 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v TN220408R TN432R 12,70 1/2 22, ,76 3/16 0,8 1/32 5, v v TN220412R TN433R 12,70 1/2 22, ,76 3/16 1,2 3/64 5, v v TN220416R TN434R 12,70 1/2 22, ,76 3/16 1,6 1/16 5, v v TN270612R TN543R 15,88 5/8 27, ,35 1/4 1,2 3/64 6, v v TN270616R TN544R 15,88 5/8 27, ,35 1/4 1,6 1/16 6, v v C30 C40 C15 C25 C35 C05 C15 C20 TN-R TN160408R TN332R 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v TN160412R TN333R 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v TN220408R TN432R 12,70 1/2 22, ,76 3/16 0,8 1/32 5, v v TN220412R TN433R 12,70 1/2 22, ,76 3/16 1,2 3/64 5, v v v v v TN220416R TN434R 12,70 1/2 22, ,76 3/16 1,6 1/16 5, v v TN270616R TN544R 15,88 5/8 27, ,35 1/4 1,6 1/16 6, v TN- INDEX TN TN331 9,53 3/8 16, ,76 3/16 0,4 1/64 3, v TN TN332 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v TN TN432 12,70 1/2 22, ,76 3/16 0,8 1/32 5, v : TN : TN331 Insert grade: B32 To place an order, contact ennametal or your authorized ennametal distributor, or visit

33 enloc Inserts VNA VNG-FF VNG-FN VNG-F VNG-N VNG- mm in mm in mm in mm in mm in VNA VNA332 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v v VNG160404FF VNG331FF 9,53 3/8 16, ,76 3/16 0,4 1/64 3, v v VNG160408FF VNG332FF 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v C30 C40 C15 C25 C35 C05 C15 C20 VNG160404FN VNG331FN 9,53 3/8 16, ,76 3/16 0,4 1/64 3, v v v v VNG160408FN VNG332FN 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v v v VNG160404F VNG331F 9,53 3/8 16, ,76 3/16 0,4 1/64 3, v VNG160408F VNG332F 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v VNG160404N VNG331N 9,53 3/8 16, ,76 3/16 0,4 1/64 3, v v v v VNG160408N VNG332N 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v v v VNG160412N VNG333N 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v v v VNG VNG331 9,53 3/8 16, ,76 3/16 0,4 1/64 3, v v v VNG VNG332 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v v VNG VNG333 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v v : VNG : VNG331 Insert grade: C25 INDEX TOOLING SYSTES SOLID END ILLS INDEXABLE HOLEAING ILLING To place an order, contact ennametal or your authorized ennametal distributor, or visit B33

34 enloc Inserts HOLEAING INDEXABLE ILLING VNG-RN mm in mm in mm in mm in mm in VNG160408RN VNG332RN 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v VNG160412RN VNG333RN 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v v VNG220408RN VNG432RN 12,70 1/2 22, ,76 3/16 0,8 1/32 5, v v v v VNG220412RN VNG433RN 12,70 1/2 22, ,76 3/16 1,2 3/64 5, v v v C30 C40 C15 C25 C35 C05 C15 C20 VNG-R VNG160408R VNG332R 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v v v v VNG160412R VNG333R 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v v v v v v v VNG-UN VNG160404UN VNG331UN 9,53 3/8 16, ,76 3/16 0,4 1/64 3, v v v VNG160408UN VNG332UN 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v v SOLID END ILLS VNG-U VNG160404U VNG331U 9,53 3/8 16, ,76 3/16 0,4 1/64 3, v v VNG160408U VNG332U 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v VNG160412U VNG333U 9,53 3/8 16, ,76 3/16 1,2 3/64 3, v v TOOLING SYSTES VN- VN VN331 9,53 3/8 16, ,76 3/16 0,4 1/64 3, v VN VN332 9,53 3/8 16, ,76 3/16 0,8 1/32 3, v v INDEX : VN : VN331 Insert grade: B34 To place an order, contact ennametal or your authorized ennametal distributor, or visit

35 enloc Inserts WNA WNG-FF WNG-FN WNG-F WNG-FW WNG-N mm in mm in mm in mm in mm in C30 C40 C15 C25 C35 C05 C15 C20 WNA WNA332 9,53 3/8 6, ,76 3/16 0,8 1/32 3, v v v WNA WNA333 9,53 3/8 6, ,76 3/16 1,2 3/64 3, v v v WNA WNA432 12,70 1/2 8, ,76 3/16 0,8 1/32 5, v v v WNA WNA433 12,70 1/2 8, ,76 3/16 1,2 3/64 5, v v v WNA WNA434 12,70 1/2 8, ,76 3/16 1,6 1/16 5, v v v WNG060404FF WNG331FF 9,53 3/8 6, ,76 3/16 0,4 1/64 3, v WNG060408FF WNG332FF 9,53 3/8 6, ,76 3/16 0,8 1/32 3, v WNG080404FF WNG431FF 12,70 1/2 8, ,76 3/16 0,4 1/64 5, v WNG080408FF WNG432FF 12,70 1/2 8, ,76 3/16 0,8 1/32 5, v WNG060404FN WNG331FN 9,53 3/8 6, ,76 3/16 0,4 1/64 3, v v WNG060408FN WNG332FN 9,53 3/8 6, ,76 3/16 0,8 1/32 3, v v v WNG080404FN WNG431FN 12,70 1/2 8, ,76 3/16 0,4 1/64 5, v v v v WNG080408FN WNG432FN 12,70 1/2 8, ,76 3/16 0,8 1/32 5, v v v v WNG060404F WNG331F 9,53 3/8 6, ,76 3/16 0,4 1/64 3, v WNG060408F WNG332F 9,53 3/8 6, ,76 3/16 0,8 1/32 3, v WNG080404F WNG431F 12,70 1/2 8, ,76 3/16 0,4 1/64 5, v WNG080408F WNG432F 12,70 1/2 8, ,76 3/16 0,8 1/32 5, v WNG080412F WNG433F 12,70 1/2 8, ,76 3/16 1,2 3/64 5, v WNG060404FW WNG331FW 9,53 3/8 6, ,76 3/16 0,4 1/64 3, v v WNG060408FW WNG332FW 9,53 3/8 6, ,76 3/16 0,8 1/32 3, v v WNG060412FW WNG333FW 9,53 3/8 6, ,76 3/16 1,2 3/64 3, v v WNG080404FW WNG431FW 12,70 1/2 8, ,76 3/16 0,4 1/64 5, v v WNG080408FW WNG432FW 12,70 1/2 8, ,76 3/16 0,8 1/32 5, v v WNG080412FW WNG433FW 12,70 1/2 8, ,76 3/16 1,2 3/64 5, v v WNG060404N WNG331N 9,53 3/8 6, ,76 3/16 0,4 1/64 3, v v WNG060408N WNG332N 9,53 3/8 6, ,76 3/16 0,8 1/32 3, v v v WNG060412N WNG333N 9,53 3/8 6, ,76 3/16 1,2 3/64 3, v v WNG080408N WNG432N 12,70 1/2 8, ,76 3/16 0,8 1/32 5, v v v v v WNG080412N WNG433N 12,70 1/2 8, ,76 3/16 1,2 3/64 5, v v v v WNG080416N WNG434N 12,70 1/2 8, ,76 3/16 1,6 1/16 5, v : WNG060404N : WNG331N Insert grade: INDEX TOOLING SYSTES SOLID END ILLS INDEXABLE HOLEAING ILLING To place an order, contact ennametal or your authorized ennametal distributor, or visit B35

36 enloc Inserts WNG- mm in mm in mm in mm in mm in WNG WNG331 9,53 3/8 6, ,76 3/16 0,4 1/64 3, v v WNG WNG332 9,53 3/8 6, ,76 3/16 0,8 1/32 3, v v v WNG WNG333 9,53 3/8 6, ,76 3/16 1,2 3/64 3, v WNG WNG432 12,70 1/2 8, ,76 3/16 0,8 1/32 5, v v v WNG WNG433 12,70 1/2 8, ,76 3/16 1,2 3/64 5, v v v C30 C40 C15 C25 C35 C05 C15 C20 WNG-W HOLEAING WNG-RN WNG060408W WNG332W 9,53 3/8 6, ,76 3/16 0,8 1/32 3, v v v WNG060412W WNG333W 9,53 3/8 6, ,76 3/16 1,2 3/64 3, v v v WNG080408W WNG432W 12,70 1/2 8, ,76 3/16 0,8 1/32 5, v v v WNG080412W WNG433W 12,70 1/2 8, ,76 3/16 1,2 3/64 5, v v v INDEXABLE ILLING WNG-R WNG060408RN WNG332RN 9,53 3/8 6, ,76 3/16 0,8 1/32 3, v v WNG060412RN WNG333RN 9,53 3/8 6, ,76 3/16 1,2 3/64 3, v v WNG080408RN WNG432RN 12,70 1/2 8, ,76 3/16 0,8 1/32 5, v v v v v WNG080412RN WNG433RN 12,70 1/2 8, ,76 3/16 1,2 3/64 5, v v v v v WNG080416RN WNG434RN 12,70 1/2 8, ,76 3/16 1,6 1/16 5, v v v SOLID END ILLS TOOLING SYSTES WNG-UN WNG-U WNG060408R WNG332R 9,53 3/8 6, ,76 3/16 0,8 1/32 3, v v v v v WNG060412R WNG333R 9,53 3/8 6, ,76 3/16 1,2 3/64 3, v v v WNG080408R WNG432R 12,70 1/2 8, ,76 3/16 0,8 1/32 5, v v v v v v v v v v v WNG080412R WNG433R 12,70 1/2 8, ,76 3/16 1,2 3/64 5, v v v v v v v v v v v WNG080416R WNG434R 12,70 1/2 8, ,76 3/16 1,6 1/16 5, v v v v v v WNG060404UN WNG331UN 9,53 3/8 6, ,76 3/16 0,4 1/64 3, v v v WNG060408UN WNG332UN 9,53 3/8 6, ,76 3/16 0,8 1/32 3, v v v WNG060412UN WNG333UN 9,53 3/8 6, ,76 3/16 1,2 3/64 3, v v v WNG080404UN WNG431UN 12,70 1/2 8, ,76 3/16 0,4 1/64 5, v v v WNG080408UN WNG432UN 12,70 1/2 8, ,76 3/16 0,8 1/32 5, v v v WNG080412UN WNG433UN 12,70 1/2 8, ,76 3/16 1,2 3/64 5, v v v WNG080416UN WNG434UN 12,70 1/2 8, ,76 3/16 1,6 1/16 5, v v v WNG060408U WNG332U 9,53 3/8 6, ,76 3/16 0,8 1/32 3, v v WNG080408U WNG432U 12,70 1/2 8, ,76 3/16 0,8 1/32 5, v v v WNG080412U WNG433U 12,70 1/2 8, ,76 3/16 1,2 3/64 5, v v v INDEX : WNG060408U : WNG332U Insert grade: C15 B36 To place an order, contact ennametal or your authorized ennametal distributor, or visit

37 Screw-On Inserts CCT-FW CCT-LF CCT-F CCT-W CCT-UF mm in mm in mm in mm in mm in CCT060204FW CCT2151FW 6,35 1/4 6, ,38 3/32 0,4 1/64 2, CCT060208FW CCT2152FW 6,35 1/4 6, ,38 3/32 0,8 1/32 2, CCT09T304FW CCT3251FW 9,53 3/8 9, ,97 5/32 0,4 1/64 4, CCT09T308FW CCT3252FW 9,53 3/8 9, ,97 5/32 0,8 1/32 4, CCT060204LF CCT2151LF 6,35 1/4 6, ,38 3/32 0,4 1/64 2, v v v v v v v v v v CCT060208LF CCT2152LF 6,35 1/4 6, ,38 3/32 0,8 1/32 2, v v v v v v v v v CCT09T304LF CCT3251LF 9,53 3/8 9, ,97 5/32 0,4 1/64 4, v v v v v v v v v v CCT09T308LF CCT3252LF 9,53 3/8 9, ,97 5/32 0,8 1/32 4, v v v v v v v v v v CCT120404LF CCT431LF 12,70 1/2 12, ,76 3/16 0,4 1/64 5, v v v v v v v CCT120408LF CCT432LF 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v v v v v v v v CCT120412LF CCT433LF 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v v v v CCT060204F CCT2151F 6,35 1/4 6, ,38 3/32 0,4 1/64 2, v v v v v v v v CCT09T304F CCT3251F 9,53 3/8 9, ,97 5/32 0,4 1/64 4, v v v v v v v v CCT09T308F CCT3252F 9,53 3/8 9, ,97 5/32 0,8 1/32 4, v v v v v v v v CCT09T312F CCT3253F 9,53 3/8 9, ,97 5/32 1,2 3/64 4, v v v v v v CCT120408F CCT432F 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v v v v v v CCT120412F CCT433F 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v v v v CCT09T304W CCT3251W 9,53 3/8 9, ,97 5/32 0,4 1/64 4, v v CCT09T308W CCT3252W 9,53 3/8 9, ,97 5/32 0,8 1/32 4, v v CCT120404W CCT431W 12,70 1/2 12, ,76 3/16 0,4 1/64 5, v v CCT120408W CCT432W 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v CCT060204UF CCT2151UF 6,35 1/4 6, ,38 3/32 0,4 1/64 2, v v v CCT09T302UF CCT32505UF 9,53 3/8 9, ,97 5/32 0, , v v CCT09T304UF CCT3251UF 9,53 3/8 9, ,97 5/32 0,4 1/64 4, v v v CCT09T308UF CCT3252UF 9,53 3/8 9, ,97 5/32 0,8 1/32 4, v v v : CCT060204UF : CCT2151UF Insert grade: To place an order, contact ennametal or your authorized ennametal distributor, or visit v v v v C30 C40 C15 C25 C35 C05 C15 C20 v v v v B37 INDEX TOOLING SYSTES SOLID END ILLS INDEXABLE HOLEAING ILLING

38 Screw-On Inserts TOOLING SYSTES HOLEAING INDEXABLE ILLING CT-FW mm in mm in mm in mm in mm in C30 C40 C15 C25 C35 C05 C15 C20 CT060204FW CT2151FW 6,35 1/4 6, ,38 3/32 0,4 1/64 2, v v CT060208FW CT2152FW 6,35 1/4 6, ,38 3/32 0,8 1/32 2, v v CT09T304FW CT3251FW 9,53 3/8 9, ,97 5/32 0,4 1/64 4, v v CT09T308FW CT3252FW 9,53 3/8 9, ,97 5/32 0,8 1/32 4, v v CT-LF CT060204LF CT2151LF 6,35 1/4 6, ,38 3/32 0,4 1/64 2, v v v v v v v v CT060208LF CT2152LF 6,35 1/4 6, ,38 3/32 0,8 1/32 2, v v v v v v v v CT09T304LF CT3251LF 9,53 3/8 9, ,97 5/32 0,4 1/64 4, v v v v v v v v CT09T308LF CT3252LF 9,53 3/8 9, ,97 5/32 0,8 1/32 4, v v v v v v v v CT-F SOLID END ILLS CT-W CT-UF CT060208F CT2152F 6,35 1/4 6, ,38 3/32 0,8 1/32 2, v v v v v v CT09T308F CT3252F 9,53 3/8 9, ,97 5/32 0,8 1/32 4, v v v v v v v v CT09T312F CT3253F 9,53 3/8 9, ,97 5/32 1,2 3/64 4, v v v v v v CT09T304W CT3251W 9,53 3/8 9, ,97 5/32 0,4 1/64 4, v v CT09T308W CT3252W 9,53 3/8 9, ,97 5/32 0,8 1/32 4, v v CT060204UF CT2151UF 6,35 1/4 6, ,38 3/32 0,4 1/64 2, v v v CT09T304UF CT3251UF 9,53 3/8 9, ,97 5/32 0,4 1/64 4, v v v INDEX : CT060204UF : CT2151UF Insert grade: B38 To place an order, contact ennametal or your authorized ennametal distributor, or visit

39 Screw-On Inserts DCT-FW DCT-LF DCT-F DCT-W DCT-UF mm in mm in mm in mm in mm in DCT11T304W DCT3251W 9,53 3/8 11, ,97 5/32 0,4 1/64 4, v v DCT11T308W DCT3252W 9,53 3/8 11, ,97 5/32 0,8 1/32 4, v v C30 C40 C15 C25 C35 C05 C15 C20 DCT11T304FW DCT3251FW 9,53 3/8 11, ,97 5/32 0,4 1/64 4, v v DCT11T308FW DCT3252FW 9,53 3/8 11, ,97 5/32 0,8 1/32 4, v v DCT070204LF DCT2151LF 6,35 1/4 7, ,38 3/32 0,4 1/64 2, v v v v v v v v v DCT11T304LF DCT3251LF 9,53 3/8 11, ,97 5/32 0,4 1/64 4, v v v v v v v v v v DCT11T308LF DCT3252LF 9,53 3/8 11, ,97 5/32 0,8 1/32 4, v v v v v v v v v v DCT11T312LF DCT3253LF 9,53 3/8 11, ,97 5/32 1,2 3/64 4, v v v v DCT150404LF DCT431LF 12,70 1/2 15, ,76 3/16 0,4 1/64 5, v v v v DCT150408LF DCT432LF 12,70 1/2 15, ,76 3/16 0,8 1/32 5, v v v v v DCT11T304F DCT3251F 9,53 3/8 11, ,0 5/32 0,4 1/64 4, v v v v v v v DCT11T308F DCT3252F 9,53 3/8 11, ,0 5/32 0,8 1/32 4, v v v v v v v v DCT11T312F DCT3253F 9,53 3/8 11, ,0 5/32 1,2 3/64 4, v v v v v v DCT070204UF DCT2151UF 6,35 1/4 7, ,38 3/32 0,4 1/64 2, v v v DCT11T302UF DCT32505UF 9,53 3/8 11, ,97 5/32 0, , v v v DCT11T304UF DCT3251UF 9,53 3/8 11, ,97 5/32 0,4 1/64 4, v v v DCT11T308UF DCT3252UF 9,53 3/8 11, ,97 5/32 0,8 1/32 4, v v v : DCT070204UF : DCT2151UF Insert grade: INDEX TOOLING SYSTES SOLID END ILLS INDEXABLE HOLEAING ILLING To place an order, contact ennametal or your authorized ennametal distributor, or visit B39

40 Screw-On Inserts TOOLING SYSTES HOLEAING INDEXABLE ILLING DT-LF C30 C40 C15 C25 C35 C05 C15 C20 mm in mm in mm in mm in mm in DT070204LF DT2151LF 6,35 1/4 7, ,38 3/32 0,4 1/64 2, v v v v v v v DT11T304LF DT3251LF 9,53 3/8 11, ,97 5/32 0,4 1/64 4, v v v v v v v DT11T308LF DT3252LF 9,53 3/8 11, ,97 5/32 0,8 1/32 4, v v v v v v v DT-F DT-UF DT11T308F DT3252F 9,53 3/8 11, ,97 5/32 0,8 1/32 4, v v v v v v DT070204UF DT2151UF 6,35 1/4 7, ,38 3/32 0,4 1/64 2, v v DT11T304UF DT3251UF 9,53 3/8 11, ,97 5/32 0,4 1/64 4, v DT11T308UF DT3252UF 9,53 3/8 11, ,97 5/32 0,8 1/32 4, v SOLID END ILLS RCGT-R RCGT08030R RCGT08030R 8, ,18 1/8 3, v v RCGT12040R RCGT12040R 12, ,76 3/16 4, v RCGX10030R RCGX10030R 10, ,18 1/8 3, v INDEX C30 C40 C15 C25 C35 C05 C15 C20 : DT070204UF : DT2151UF Insert grade: B40 To place an order, contact ennametal or your authorized ennametal distributor, or visit

41 Screw-On Inserts RCT RCT-RH RCT-R RCT-R RCT20060RH RCT20060RH 20, ,35 1/4 6, v v RCX25070RH RCX25070RH 25, ,94 5/16 7, v v RCX32090RH RCX32090RH 32, ,53 3/8 10, v v RCT12040R RCT12040R 12, ,76 3/16 4, v v v v RCT16060R RCT16060R 16, ,35 1/4 5, v v v RCT20060R RCT20060R 20, ,35 1/4 6, v v v RCX10030R RCX10030R 10, ,18 1/8 3, v v v RCX25070R RCX25070R 25, ,94 5/16 7, v v RCX32090R RCX32090R 32, ,53 3/8 10, v : RCT : RCT215 Insert grade: mm in mm in mm in mm in mm in RCT20060R RCT20060R 20, ,35 1/4 6, v C30 C40 C15 C25 C35 C05 C15 C20 RCT06020 RCT , ,38 3/32 2, v v v v RCT08030 RCT , ,18 1/8 3, v v v v RCT10T30 RCT10T30 10, ,97 5/32 4, v v v v RCT12040 RCT , ,76 3/16 4, v v v RCT16050 RCT , ,56 7/32 5, v v v RCT20060 RCT , ,35 1/4 6, v v v v RCT RCT215 6,35 1/4 2,38 3/32 2, v v v RCT09T3 RCT325 9,53 3/8 3,97 5/32 4, v v v RCT RCT43 12,70 1/2 4,76 3/16 5, v v INDEX TOOLING SYSTES SOLID END ILLS INDEXABLE HOLEAING ILLING To place an order, contact ennametal or your authorized ennametal distributor, or visit B41

42 Screw-On Inserts Inserts SCT-LF C30 C40 C15 C25 C35 C05 C15 C20 mm in mm in mm in mm in mm in SCT09T304LF SCT3251LF 9,53 3/8 9, ,97 5/32 0,4 1/64 4, v v v v v v v v SCT09T308LF SCT3252LF 9,53 3/8 9, ,97 5/32 0,8 1/32 4, v v v v v v v v v SCT120404LF SCT431LF 12,70 1/2 12, ,76 3/16 0,4 1/64 5, v v v v v v v SCT120408LF SCT432LF 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v v v v v v v v HOLEAING SCT09T308F SCT3252F 9,53 3/8 9, ,97 5/32 0,8 1/32 4, v v v v v v v SCT120408F SCT432F 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v v v v v v SCT120412F SCT433F 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v v v TOOLING SYSTES SOLID END ILLS INDEXABLE ILLING SCT120412LF SCT433LF 12,70 1/2 12, ,76 3/16 1,2 3/64 5, v v v v SCT-F INDEX SCT-UF SCT09T308UF SCT3252UF 9,53 3/8 9, ,97 5/32 0,8 1/32 4, v v Order Example: : RCX10030R : RCX10030R insert grade: B42 To place an order, contact ennametal or your authorized ennametal distributor, or visit

43 Screw-On Inserts ST-LF ST-F ST-UF : SCT09T308UF : SCT3252UF Insert grade: mm in mm in mm in mm in mm in ST09T304UF ST3251UF 9,53 3/8 9, ,97 5/32 0,4 1/64 4, v v C30 C40 C15 C25 C35 C05 C15 C20 ST09T304LF ST3251LF 9,53 3/8 9, ,97 5/32 0,4 1/64 4, v v v v ST09T308LF ST3252LF 9,53 3/8 9, ,97 5/32 0,8 1/32 4, v v v v v ST09T308F ST3252F 9,53 3/8 9, ,97 5/32 0,8 1/32 4, v v v v v v ST120408F ST432F 12,70 1/2 12, ,76 3/16 0,8 1/32 5, v v v v v v v INDEX TOOLING SYSTES SOLID END ILLS INDEXABLE HOLEAING ILLING To place an order, contact ennametal or your authorized ennametal distributor, or visit B43

44 Screw-On Inserts TCT-LF mm in mm in mm in mm in mm in C30 C40 C15 C25 C35 C05 C15 C20 TCT110204LF TCT2151LF 6,35 1/4 11, ,38 3/32 0,4 1/64 2, v v v v v v v v v v TCT110208LF TCT2152LF 6,35 1/4 11, ,38 3/32 0,8 1/32 2, v v v v v v v v v TCT16T304LF TCT3251LF 9,53 3/8 16, ,97 5/32 0,4 1/64 4, v v v v v v v v v v TCT16T308LF TCT3252LF 9,53 3/8 16, ,97 5/32 0,8 1/32 4, v v v v v v v v v v TCT16T312LF TCT3253LF 9,53 3/8 16, ,97 5/32 1,2 3/64 4, v v v v v v v v TCT220408LF TCT432LF 12,70 1/2 22, ,76 3/16 0,8 1/32 5, v v v v HOLEAING TCT-F TCT110208F TCT2152F 6,35 1/4 11, ,38 3/32 0,8 1/32 2, v v v v v v TCT16T308F TCT3252F 9,53 3/8 16, ,97 5/32 0,8 1/32 4, v v v v v v v v TCT16T312F TCT3253F 9,53 3/8 16, ,97 5/32 1,2 3/64 4, v v v v v v TCT-UF INDEXABLE ILLING TT-LF TCT110204UF TCT2151UF 6,35 1/4 11, ,38 3/32 0,4 1/64 2, v v TCT110208UF TCT2152UF 6,35 1/4 11, ,38 3/32 0,8 1/32 2, v v TCT16T308UF TCT3252UF 9,53 3/8 16, ,97 5/32 0,8 1/32 4, v v TT090204LF TT18151LF 5,56 7/32 9, ,38 3/32 0,4 1/64 2, v v v v v v v TT110204LF TT2151LF 6,35 1/4 11, ,38 3/32 0,4 1/64 2, v v v v v v v v SOLID END ILLS TT-F TT110208LF TT2152LF 6,35 1/4 11, ,38 3/32 0,8 1/32 2, v v v v v v v v TT16T304LF TT3251LF 9,53 3/8 16, ,97 5/32 0,4 1/64 4, v v v v v v v v TT16T308LF TT3252LF 9,53 3/8 16, ,97 5/32 0,8 1/32 4, v v v v v v v v v TT16T312LF TT3253LF 9,53 3/8 16, ,97 5/32 1,2 3/64 4, v v TT220408LF TT432LF 12,70 1/2 22, ,76 3/16 0,8 1/32 5, v v TOOLING SYSTES TT-UF TT110208F TT2152F 6,35 1/4 11, ,38 3/32 0,8 1/32 2, v v v v v TT16T308F TT3252F 9,53 3/8 16, ,97 5/32 0,8 1/32 4, v v v v v v v TT16T312F TT3253F 9,53 3/8 16, ,97 5/32 1,2 3/64 4, v v v v TT110202UF TT21505UF 6,35 1/4 11, ,38 3/32 0, , v TT110204UF TT2151UF 6,35 1/4 11, ,38 3/32 0,4 1/64 2, v v TT16T304UF TT3251UF 9,53 3/8 16, ,97 5/32 0,4 1/64 4, v TT16T308UF TT3252UF 9,53 3/8 16, ,97 5/32 0,8 1/32 4, v v INDEX : TT110202UF : TT21505UF Insert grade: B44 To place an order, contact ennametal or your authorized ennametal distributor, or visit

45 Screw-On Inserts VBT-LF WT-LF LNUX-RRH W L1 S Rε D1 Bγ mm in mm in mm in mm in mm in mm in LNUX191940RRH LNUX191940RRH 10, , ,05 3/4 4,00 5/32 6, v v LNUX301940RRH LNUX301940RRH 12, , ,05 3/4 4,00 5/32 6, v v : WT040204LF : WT2151LF Insert grade: B5625 mm in mm in mm in mm in mm in C30 C40 C15 C25 C35 C05 C15 C20 VBT110304LF VBT221LF 6,35 1/4 11, ,18 1/8 0,4 1/64 2, v v v v v v v v VBT110308LF VBT222LF 6,35 1/4 11, ,18 1/8 0,8 1/32 2, v v v v v v v v VBT160404LF VBT331LF 9,53 3/8 16, ,76 3/16 0,4 1/64 4, v v v v v v v v v v VBT160408LF VBT332LF 9,53 3/8 16, ,76 3/16 0,8 1/32 4, v v v v v v v v v v VBT160412LF VBT333LF 9,53 3/8 16, ,76 3/16 1,2 3/64 4, v v WT040204LF WT2151LF 6,35 1/4 4, ,38 3/32 0,4 1/64 2, v v v WT06T304LF WT3251LF 9,53 3/8 6, ,97 5/32 0,4 1/64 4, v v v v v v WT06T308LF WT3252LF 9,53 3/8 6, ,97 5/32 0,8 1/32 4, v v v v v v Heavy-Duty Turning C30 C40 C15 C25 C35 C05 C15 C20 INDEX TOOLING SYSTES SOLID END ILLS INDEXABLE HOLEAING ILLING To place an order, contact ennametal or your authorized ennametal distributor, or visit B45