Double Reduction Worm / Worm
|
|
- Miles Dalton
- 5 years ago
- Views:
Transcription
1 The Double Reduction Worm/Worm Flexaline Speed Reducer Double Reduction Worm / Worm New and improved dimension and assembly drawings, quick reference charts and rating tables plus more in the Worm/Worm section...
2 Worm / Worm Reduction Product Features Rugged iron housings, covers, and flanges provide superior strength and rigidity. Single cover output design ensures gear centering for maximum efficiency and minimum noise levels.* Two separate housings in the double reduction design insures long trouble free life of all components. The worm shaft is cut integral with the input shaft then hardened, ground, and polished to provide maximum efficiency with minimum gear noise. The bronze worm gear is chill cast from the highest quality bronze to provide superior wear and lubricity characteristics for longer life and higher efficiency. Premium tapered roller bearings on output shafts provide greater life, overhung load and thrust capacity. Oversized steel output shafts provide superior overhung load and torque characteristics. Premium Chicago Rawhide Viton double lip seals provide extended life because of increased resistance to high temperature, abrasion and chemicals.* O-rings on input and output covers provide positive sealing without undependable gaskets or messy silicone sealants.* Non-compressible metal shims maintain factory bearing settings and gear alignment throughout the life of the product.* The unique quill seal guard protects the input seal from damage during motor installation.* Large oil capacity provides positive splash lubrication and superior cooling capability. Metal nameplate drive screwed to housing insures easy field identification for repair parts and replacement. Units are oil filled at the factory with the proper lubrication to provide simple and economical installation.** All units are 100% run and leak tested at the factory to insure that you receive the highest quality product. * Standard on unit sizes up to and including 5 1/4 inch center distance only. (Size 213 to 252) ** Seven, eight, and ten inch center distance reducers are shipped without oil. (Sizes 2700, 2800, & 21000)
3 Worm / Worm Selection Guide Style D Style DM Style DMQ Style DT Style DTM Style DTMQ Style DU Style DUM Style DUMQ Style DVL Style DVLM Style DVLMQ Style DVH Style DVHM Style DVHMQ Style DJ Style DJM Style DJMQ Style DF Style DFM
4 Worm / Worm Selection Guide Style DFMQ Style DH Style DHM Style DHMQ Style DFH Style DFHM Style DFHMQ Style DVLH Style DVLHM Style DVLHMQ Style DVHH Style DVHHM Style DVHHMQ Style DJH Style DJHM Style DJHMQ Style DFE Style DFEM Style DFEMQ
5 Quick Reference Model Selection Chart Worm/Worm Class I (1.0 Service Factor) Input 1750 RPM Reduc. Output Ratio RPM 1/8 1/6 1/4 1/3 1/2 3/ Not Available Note: This chart is meant only as a guide. Class II (1.25 Service Factor) Input 1750 RPM Reduc. Output RATIO RPM 1/8 1/6 1/4 1/3 1/2 3/ Not Available For Class III (2.00 Service Factor) contact factory. Note: This chart is meant only as a guide.
6 Worm / Worm Approximate Shipping Weights (LBS.) STYLE D DM DMQ DT & DU DTM & DUM DTMQ & DUMQ DVL & DVH DVLM & DVHM DVLMQ & DVHMQ DJ DJM DJMQ DF DFM DFMQ DH DHM DHMQ DFH DFHM DFHMQ DFE DFEM DFEMQ Flexaline Accessories Approximate Shipping Weights (LBS.) Double Reduction Worm/Worm Design ACCESSORY Horizontal Base Verical Base "J" Mount Base "C" Flange Kits
GR SERIES DOUBLE REDUCTION WORM - WORM APPROXIMATE WEIGHTS (LBS.)
GR Series Weights GR SERIES DOUBLE REDUCTION WORM - WORM APPROXIMATE WEIGHTS (LBS.) Reducer Style GR813 GR815 GR818 GR821 GR824 GR826 GR830 GR832 GR842 GR852 GR860 GR870 GR880 GR8100 DMQ 34 38 41 46 62
More informationThe Single Reduction Flexaline Speed Reducer
The Single Reduction Flexaline Speed Reducer Single Reduction Worm Gear New and improved dimension and assembly drawings, quick reference charts and rating tables plus more in the Single Reduction section...
More informationOutput Shaft Mounting Output Series Code Style Size Ratio Orientation Assembly Motor Flange Bore Code
Single Reduction Worm - Helical - and GEAR+MOTOR Ratio Multipliers Model Number System Worm - Worm 800 Series Gear Reducer Model Number Nomenclature All new stock and custom 800 Series Grove Gear and Electra-Gear
More information800 Series Gear Reducers Built For Industrial Use
800 Series Built For Industrial Use Precision mounting surfaces and extra threaded bolt holes on top and bottom for flexibility and to accept a wide range of stock mounting accessories. Cast iron NEMA
More informationTechnical Information
5 11 10 1 8 1 19 1 10 1 4 1 1 1 5 8 1 14 High Efficiency 1 1 19 14 15 1 18A 18B 4 0 18B 18A 1 MODEL B81-8100 (Basic SINGLE REDUCTION BASIC SINGLE REDUCTION UNIT (B-STYLE) ITEM # DESCRIPTION 1 HOUSING PIPE
More informationFABRICATED AIRLOCK. Installation, Operation & Maintenance Instructions 312 SOUTH HWY. 73, PO BOX 398 FALLS CITY, NE
FABRICATED AIRLOCK Installation, Operation & Maintenance Instructions 31 SOUTH HWY. 73, PO BOX 398 FALLS CITY, NE 68355-0398 800-500-9777 Revision Date 06/7/08 Index Introduction... 3 Receiving Your Equipment...
More informationCONTENTS. Adaptable TIGEAR Right Angle Speed Reducers. Specification... How To Order...
CONTENTS Right Angle Speed Reducers Features/Benefits... G4--2 Specification... How To Order... G4--4 G4--5 Nomenclature Easy Selection...... G4--5 G4--6 Selection/Dimensions... Mounting Positions... G4--10
More informationPower Transmission solutions for every
Power Transmission solutions for every IRONMAN GR Series Stainless Steel ironman High Efficiency Gear Reducers washguard Recognized throughout the world as a leader in industrial-duty gear reducers, GEAR+MOTORS
More informationHub City TM Worm Gear Drives
Worm Gear Features -2 to -6 Factory Options -7 Rating Parameters -8 Pre-Selection Information -9 How To Select and Order Standard Models -10 Single Reduction -11 to -56 Single Reduction Model Index -12
More informationA ccessories Kits & Accessories
Kits & Accessories Accessories Base Kits & Riser Blocks Horizontal Base Kits Vertical Base Kits 213 16460 215 16461 218 16462 220 16463 224 16464 226 16465 230 16466 232 16467 242 16468 252 16469 2600
More informationCHILL CAST BRONZE WORM GEAR, HARDENED STEEL WORM
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 GF5032BG F-932-50-B7-G Baldor Electric CO. Catalog Number Manufacturer Description Weight per unit Product Category Features
More information800 Series Gear Reducers Built For Industrial Use
Helical - Push-off holes drilled and tapped into flange for quick motor removal on quill input styles (56 & 140TC frames). 800 Series Gear Reducers Built For Industrial Use Cast iron IEC and NEMA C input
More informationHow To Use Maximum Rating Tables
How To Use for Double Reduction Gear Reducers are shown on pages 193-196. 1 Locate the Input RPM and Output RPM columns in the charts beginning on page 204. Scroll down the Input RPM column to locate a
More informationCONTENTS ComboGear Updated 5/17/2016
MASTER CONTENTS Updated 5/17/2016 Contents Features / Benefits...CG-2 Specification...CG-4 How To Order...CG-4 Nomenclature...CG-4 Easy Selection...CG-5 Selection Using Rating Tables...CG-12 Dimensions...CG-23
More informationGrove Gear IRONMAN High Effiiciency Helical - Bevel Gear Reducers
Grove Gear IRONMAN High Effiiciency Helical - Bevel K Series Features and Benefits standard double lip Seals provide extra protection against entry of contaminants or loss of lubrication. Bearing spans
More informationGROVE GEAR IRONMAN HIGH EFFICIENCY HELICAL-INLINE GEAR REDUCERS & GEAR+MOTOR SOLUTIONS
GROVE GEAR IRONMAN HIGH EFFICIENCY HELICAL-INLINE GEAR REDUCERS & GEAR+MOTOR SOLUTIONS R SERIES FEATURES AND BENEFITS ALL GEARING is HARDENED AND GROUND (AGMA class 10 or better) for enhanced efficiency
More informationGROVE GEAR IRONMAN HIGH EFFICIENCY HELICAL-BEVEL GEAR REDUCERS K SERIES FEATURES AND BENEFITS
GROVE GEAR IRONMAN HIGH EFFICIENCY HELICAL-BEVEL GEAR REDUCERS K SERIES FEATURES AND BENEFITS standard double lip Seals provide extra protection against entry of contaminants or loss of lubrication. Bearing
More informationGrove Gear Ironman High Efficiency Helical - Inline Gear Reducers and GEAR+MOTOR Solutions
BRAVO Grove Gear Ironman and GEAR+MOTOR Solutions R Series Features and Benefits ALL GEARING is HARDENED AND GROUND (AGMA class 10 or better) for enhanced efficiency and noise reduction. Double reduction
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More informationWASHGUARD Gear Reducers & GEAR+MOTOR
Single Reduction WASHGUARD Gear Reducers & GEAR+MOTOR With gear reducers in epoxy painted cast iron, polished aluminum and stainless steel, Grove Gear offers a solution for any washdown application. GOOD
More informationSHAFT MOUNT REDUCERS. For Additional Models of Shaft Mount Reducers See Sections F & J G-1
SHAFT MOUNT REDUCERS PowerTorque Features and Description... -2 Nomenclature... -4 Selection Instructions... -5 Selection By Horsepower... -7 Mechanical Ratings... -12 Dimensions... -14 Accessories...
More informationCA1600 Effective Date: August, 2004
Gear Products CA1600 Effective Date: August, 2004 Why Baldor? For over 80 years, Baldor has strived to provide customers with the best value and reliability in industrial products. To be considered by
More information8" Submersible Turbine Pump 450 GPM
8" Submersible Turbine Pump 450 GPM Submersible Turbine Pumps Features Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More informationMASTER SPECIFICATION XL RIGHT ANGLE GEARING XL PARALLEL GEARING
SPECIFICATION XL RIGHT ANGLE GEARING The speed reducer shall be suitable for integral gearmotor construction, readily adaptable for C-face mounting, in either integrally cast feet, output flange, multi-mount,
More information5" Submersible Turbine Pump 120 GPM
5" Submersible Turbine Pump 120 GPM Submersible Turbine Pumps Features: n 100% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More informationMASTER SPECIFICATION XL RIGHT ANGLE GEARING XL PARALLEL GEARING
SPECIFICATION XL RIGHT ANGLE GEARING The speed reducer shall be suitable for integral gearmotor construction, readily adaptable for C-face mounting, in either integrally cast feet, output flange, multi-mount,
More information5" Submersible Turbine Pump 220 GPM
5" Submersible Turbine Pump 220 GPM Submersible Turbine Pumps Features: n 00% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More informationCOUNTY OF ROCKLAND Department of General Services Purchasing Division
COUNTY OF ROCKLAND Department of General Services Purchasing Division Title: Contract Period: Gear Reducers-Grove Gear or Equal August 31, 2016 through August 30, 2017 with 2 one-year options, Extended
More informationDIAPHRAGM METERING PUMPS
JANUARY 2004 DIAPHRAGM METERING PUMPS JN Series 5 Models 1-7 GPH MF Series 11 Models 5-75 GPH MH Series 5 Models 96-180 GPH Simple, Rugged and Accurate Designed For Continuous Heavy Duty Service Manufacturing,
More informationModels 9202C, 9203C, 9252C-C, and 9253C-C
Models 0C, 03C, C-C, and 3C-C 3 0 3 consists of () Ref. O-ring, () Ref. Mechanical Seal (Viton) and () Ref. Gasket. NOTE: When ordering parts, give quantity, part number, decription, and complete model
More informationQUICK REFERENCE Stock Sub-FHP Gearmotors
Parallel Shaft PZ Series QUICK REFERENCE Stock Sub-FHP P240 & P300 Series AC Single & Three Phase Single Phase 115V 12-100 In-Lbs Page 102 Single Phase 115/230V 43-391 In-Lbs Page 103 DC SCR & Low Voltage
More informationSHAFT MOUNT & SCREW CONVEYOR REDUCERS. Cleveland
SHAFT MOUNT & SCREW CONVEYOR REDUCERS Cleveland SHAFT MOUNT & SCREW CONVEYOR REDUCER FEATURES Shaft Mount reducers available in sizes 2 Screw Conveyor reducers available in sizes 2 6 Suitable for AGMA
More informationEngineering Data. Single Reduction Parts List. Item # Description
Single Reduction Basic Single Reduction Unit. Gear Housing. Pipe Plug. Vent Plug 4. Splash Guard. Input Cover. O-Ring. Hex Head Cap Screw 8. Input Oil Seal 9. Input Bearing. Input Bearing *. Retaining
More informationHub City Spartan Aluminum Worm Gear Drives
Spartan Aluminum Worm Gear Features C-2 Selection Instructions C-3 Descriptions C-4 Single Reduction Ratings C-5 Single Reduction Dimensions C-6 to C-7 Double Reduction Worm-Worm Ratings C-8 Double Reduction
More informationSERIES 12 SUB-FHP RIGHT ANGLE DC GEARMOTORS
SERIES 12 SUB-FHP RIGHT ANGLE DC GEARMOTORS SERIES 12 SUB-FHP Electrical Specifications: Both SCR (90 volt) and Low Voltage (12 volt) right angle gearmotors. the 90 volt motors are performance matched
More informationSUBMERSIBLE TURBINE PUMPS
FEATURES Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life Spiral cutlass rubber intermediate bearings designed for abrasive
More informationHub City Spartan Aluminum Worm Gear Drives
Spartan Aluminum Worm Gear Features C-2 Selection Instructions C-3 Descriptions C-4 Single Reduction Ratings C-5 Single Reduction Dimensions C-6 to C-7 Double Reduction Worm-Worm Ratings C-8 Double Reduction
More informationAPG Updated APG
MASTER CONTENTS Updated 5-24-2017 Contents Features / Benefits...-2 Specification...-4 How To Order...-4 Nomenclature...-6 Selection Gearmotors... -7 C-Face and Separate Reducers... -25 Dimensions Gearmotors...
More informationSUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS
SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS 12-100 In-Lbs Single phase gearmotors, totally enclosed for continuous duty, general purpose applications. Permanent TEFC split capacitor designs are rated
More informationVIKING SG SERIES SINGLE PUMPS (WITH SHAFT SEAL)
SERIES SG-04, -05, -07, -10, -14 () Page 341.1.1 OPERATING RANGE: SERIES SG-04/-05 PUMP SG Pumps (, Lip or Mechanical Sealed) Displacements No. 29 Flow Range Pressure Range Temperature Range Viscosity
More informationGROVE GEAR PRODUCTS BROCHURE
GROVE GEAR PRODUCTS BROCHURE A Multitude of Applications Chemicals Processing Meat GR Series Worm Gear Reducers EL Series Worm Gear Reducers SS Series Worm Gear Reducers Fourteen sizes available with ratings
More informationQUICK REFERENCE Stock Sub-FHP Gearmotors
QUICK REFERENCE Stock Sub-FHP Right-Angle Worm Type 10 & 13 Series AC Single & Three Phase Single Phase 115/230V 14-113 In-Lbs Page 155 DC SCR & Low Voltage DC SCR 90 & 180V 5-135 In-Lbs Low Voltage (12V)
More informationSingle Reduction Falk Omnibox Worm Gear Drives Parts Guide
Single Reduction Falk Omnibox Worm Gear Drives Parts Guide Type W Sizes 33 thru 00 (Page of ) Introduction This parts guide is designed to assist in ordering replacement parts for standard single reduction
More informationDuctile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationPony V Page 1 of 24 Battery Mounting Bracket
5151 Pony V Page 1 of 24 Battery Mounting Bracket 5151 Pony V Page 2 of 24 Battery Mounting Bracket 2 9296 2 CABLE- battery (replaces #9223) 4 9224 1 CLIP- vent tube shield (small) 6 9826 2 NUT- hex, 5/16"-24
More informationFKL PUMP HEAD ASSEMBLY
FKL Series Pumps 14 FKL PUMP HEAD ASSEMBLY (FOR COP PUMP HEAD ASSEMBLY, SEE PAGE 21) 25 24 51 28 12b 31 23 53 52 15 30 29 9b 26 10 3 5 12600616 7/1/2011 33 32 11b 36 FKL PUMP GEARBOX ASSEMBLY 39d 34 9a
More informationSPARTAN ALUMINUM WORM GEAR DRIVES. For Cast Iron Worm Gear Drives See Section B. New Ratings and Ratios! See Pages C-7, C-10, C-13 C-1
SPARTAN ALUMINUM WORM GEAR DRIVES Spartan Aluminum Worm Gear Features......................................-2 Selection Instructions.........................................................-3 Mounting
More informationSUBMERSIBLE TURBINE PUMPS
FEATURES 100% factory wet tested with test results shipped with each pump Premium ductile iron casting for long life and high pressures Longer discharge and motor bracket bearings for increased pump life
More information900 SERIES. Specifications. Features
900 SERIES Over 350 models in stock, a 24-hour Quick Ship program on most popular non-stock items, and 35 warehouses throughout North America Baldor gives you the features you want, where and when you
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationFeatures: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
More informationDraw on Our Strength. Complete Reciprocating Pumps Line. Quality Service Innovation
Draw on Our Strength INDUSTRIAL OIL & GAS SPECIAL PURPOSE Complete Reciprocating Pumps Line Quality Service Innovation History of Myers Founded in 1870 by brothers Frances and Philip Myers in Ashland,
More informationDISASSEMBLY AND ASSEMBLY (Continued)
205-03-23 Front Drive Axle/Differential Ford 8.8-Inch Ring Gear 205-03-23 49. Measure the ring gear backlash at four places to obtain a consistent reading. 1 Mount the special tools on the indicator base.
More informationBravo! An Alternative For Machine
Bravo! An Alternative For Machine Vent Free Design.** No breather or vents to leak! Factory lubricated for life with premium synthetic Mobil Glygoyle 460 (PAG) lubricant with an operation range of -25
More information21A Tuffy Tiller Page 1 of 18 Bolo Tines & Wheels
21A-510-081 Tuffy Tiller 12155 Page 1 of 18 Bolo Tines & Wheels 21A-510-081 Tuffy Tiller 12155 Page 2 of 18 Bolo Tines & Wheels Ref # Part Number Qty S/P/F Description 1 1100046 16 S Bolt-Hex Head, 3/8-16
More informationVIKING SPUR GEAR SINGLE PUMPS SERIES SG-04, SG-05, SG-07 AND SGN-05, SGN-07 STANDARD CONSTRUCTION FEATURES
VIKING SPUR GEAR SINGLE PUMPS FEATURES Section 34 Page 34. SERIES SG-04 and SG-05 Pumps Cutaway View.0 to.2 GPM Sizes (.0 to 2.5 m³/hr) SERIES SG-07 Pump Cutaway View 2.8 to 32.0 GPM Sizes (. to 7 m³/hr)
More informationHEAVY DUTY WORM GEARBOX MODEL SBWG
FEATURES AND BENEFITS The SBWG model is suitable for use with Butterfly, Plug and any other type requiring quarter turn motion for thrust and torque applications High Tensile Aluminium bronze material
More informationA REGAL-BELOIT COMPANY. More Than Just a Motor Company WASHGUARD WASHDOWN DUTY PT PRODUCTS ELECTRIC MOTORS, GEARMOTORS AND DRIVES.
A REGAL-BELOIT COMPANY More Than Just a Motor Company WASHGUARD WASHDOWN DUTY PT PRODUCTS ELECTRIC MOTORS, GEARMOTORS AND DRIVES Bulletin 1500 WASHGUARD WHITE EPOXY Enhanced Performance in Wet, Humid Areas
More informationProduct Range IDEX CORPORATION
Product Range IDEX CORPORATION Viking Pump provides an unmatched combination of application expertise and positive displacement pumping products to meet your pumping needs. We specialize in the design,
More informationWorm Gear Reducers Installation, Lubrication and Maintenance Instructions
Selection Information Read ALL instructions prior to operating reducer. Injury to personnel or reducer failure may be caused by improper installation, maintenance or operation. Written authorization from
More informationSUB-FHP DC GEARMOTORS PARALLEL SHAFT GEARMOTORS
10-100 In-Lbs Torque 36-100 In-Lbs Torque Electrical Specifications: SCR Rated Totally enclosed, permanent magnet DC gearmotors, performance matched for continuous duty service over a 60:1 speed range.
More informationQUICK REFERENCE Stock Sub-FHP Gearmotors
QUICK REFERENCE Stock Sub-FHP AC Single & Three Phase DC SCR & Low Voltage Parallel Shaft PZ Series Single Phase 115V 12-100 In-Lbs Page 166 DC SCR 90 & 180V 10-100 In-Lbs 36-100 In-Lbs torque Page 156
More informationRatio Multipliers. A Regal Brand
Ratio Multipliers A Regal Brand Driven to be the Best Ratio Multipliers Dual purpose design can be used as a stand alone single reduction inline reducer or as a bolt-on to the input of any c-faced gear
More informationFIXED MOUNT MIXERS FRG, FRH, FRG-C & FRH-C SERIES
FIXED MOUNT MIXERS FRG, FRH, FRG-C & FRH-C SERIES modular design for easy adaptation between sealed, closed, and open tanks. quick shipping usually within 2 days based on configuration selected. durable
More informationParts List Single Reduction Models, Cast Iron Units
Parts List Single Reduction Models, Cast Iron Units 60 51 51 10 24 11 11 9 24 12 19 17 27 31 8 23 7 14 20 28 26 5 1 2 6 44 60 50 23 7 6 30 27 30 4 3 30 13 29 14 22 18 27 43 48 50 8 15 16 12 25 9 51 51
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE:
Page 1701.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationAll Products Catalog We Provide Solutions
All Products Catalog We Provide Solutions A Regal Brand We Listen Define your critical application and business needs, and we ll help you determine the right path to success. and Provide Solutions. We
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More informationCentrifugal End Suction Fire Pumps
Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These
More informationfile://c:\program Files\tsocache\OFFICE_5416\SY1~us~en~file=SY131B46.htm~gen~ref...
Page 1 of 41 SECTION 303-01B: Engine 4.6L and 5.4L 2000 F-150 Workshop Manual ASSEMBLY Procedure revision date: 01/27/2004 Engine 4.6L Special Tool(s) Compressor, Valve Spring 303-567 (T97P-6565-AH) Compressor
More informationMINA-GEAR GEARMOTORS P-1. Mina-Gear Features... P-2 Application & Selection... P-3 Right-Angle Worm Gearmotors Series Parallel Shaft Gearmotors
MINA-GEAR GEARMOTORS Mina-Gear..................................................... -2 Application & Selection................................................... -3 Right-Angle Worm Gearmotors 2100 Series
More informationEngine. Special Tool(s) Compressor, Valve Spring (T97P-6565-AH) Compressor Spacer, Valve Spring (T91P-6565-AH)
Page 1 of 41 SECTION 303-01A: Engine 5.4L (2V) 2000 F-Super Duty 250-550/Excursion/F-53 Motorhome Chassis Workshop Manual ASSEMBLY Procedure revision date: 04/04/2003 Engine Special Tool(s) Compressor,
More informationHelical Multiplier Series
Helical Multiplier Series Section Contents HM Series eatures / How to Order...............................................240 HM Series standard products... 241 Mounting Assemblies.... 242 Lubrication
More informationNSF International Certified. Polished matte finish maintains clean appearance throughout operation. Optional high. pressure washdown.
SS700 Series Worm Gear Speed educers IP69 When ordered with high pressure washdown seal option* Trusted Worm Gearing with a evolutionary Smooth xterior NS International ertified Polished matte finish maintains
More informationD-90 Type DE Double Enveloping Worm Gear Speed Reducers.
T D-90 Type DE Double Enveloping Worm Gear Speed Reducers www.winsmith.com WINSMITH D-90 TYPE DE S NEW DOUBLE ENVELOPING WORM GEAR REDUCERS HIGH POWER HIGH EFFICIENCY COMPACT DESIGN WORM SHAFT Heat-treated
More informationALUMINUM RATIO MULTIPLIERS
More Than Just a Motor Company ALUMINUM RATIO MULTIPLIERS Bulletin 7052 FEATURES 7 5 1 2 3 9 6 8 4 10 1 2 3 4 Lightweight Aluminum Construction is up to 75% lighter and 35% smaller than cast iron reducers
More informationLACT PERFORMANCE PRODUCTS
LACT PRODUCTS DURABLE & RELIABLE SOLUTIONS BOLTS PLUG LID Low Pressure Drop Inclined basket design for low pressure drop and high system efficiency O-RING Easy to Clean Top basket removal eliminates the
More informationAC METRIC (IEC) MOTORS THREE PHASE
These high efficiency motors meet North American performance standards and EPACT energy efficiency mandates, and have.5 service factors. Typically used for replacement on machine tools, textile machinery
More informationGearmotors Parallel Shaft - PZ Series - DC
90 & 180 - TENV - PZ Series Price Model Frame P X XL XH 4 40 1 40 M1115002.00 496 985.620 PZ5-30A 450 90 0.46 155 3.00 3.25 9.28 7.72 S, US 40 1 40 M1125046.00 496 985.623 PZ5-30A 450 180 0.19 155 3.00
More informationFrom the industry leader in concrete batch plants and mixers... Rugged Reliability Superior Performance. PRINTED IN U.S.A.
From the industry leader in concrete batch plants and mixers... 237 North 13th Street P.O. Box 430 Blair, Nebraska 68008 402-426-4181 Fax 402-426-4180 MEMBER OF www.con-e-co.com PRINTED IN U.S.A. Rugged
More informationNC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
More informationUniversal Series Style Reference Guide
STF Universal Series Style Reference Guide SVF Accessories Dimensions P. 161 Dimensions P. 162 ST SB SV Ratio Multipliers In-Line Helical (ILH) Universal Series Universal Series STL Dimensions P. 163 SVL
More informationCENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES
FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics
More informationIntake Components 1117
Item Part Number Description 1 W705654 Bolt 2 N807309 Bolt (2 req'd) 3 9F460 Bracket 4 N807071 Bolt (5 req'd) 5 9A448 Intake manifold (upper) 6 9E498 Vacuum harness 7 9F792 Fuel injection supply manifold
More information2000RA WORM GEAR REDUCER
2000RA WORM GEAR REDUCER INSTALLATION AND MAINTENANCE MANUAL February 22, 2010 Indianapolis, Indiana (800) 866-7973 Hamilton, Ontario (800) 809-0330 e-mail: sales@sterlingelectric.com www.sterlingelectric.com
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
More informationSeries Bloom TM Hydraulic Speed Reducers Standard Features. Fast Dependable Bloom Winches. A Pull Above the Rest HYDRAULIC CAPSTAN WINCHES
Series 1400 HYDRAULIC CAPSTAN WINCHES Series 1400 Capstan Series 1400V Capstan Fast Dependable Bloom Winches A Pull Above the Rest Bloom TM Hydraulic Speed Reducers Standard Features GEAR CASE WORM SHAFT
More informationASME END SUCTION PUMPS Catalogue K-90
ASME END SUCTION PUMPS Catalogue K-90 ASME B3.1-01 ISO 9001:008 REGISTERED COMPANY Engineered Pumps for Industrial and Municipal Services ASME B3.1 / ANSI END SUCTION PUMPS This catalogue provides the
More informationDischarge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft
More informationSUBMERSIBLE TURBINE PUMPS
FEATURES 1% Franklin Electric factory wet tested with test results shipped with each pump Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for
More informationTransfer Valve Actuator Service Parts List
Document Number SPL82395 Issue Date 12/10/99 Rev. Date 01/22/08 Transfer Valve Actuator Service Parts List Manual Actuator, Top Mounted Manual Actuator, Bottom Mounted Electric Actuator, Top Mounted Electric
More information+1 (800) Gear Reducers STOCK PRODUCTS CATALOG. Industry. DRIVING & Controlling WorldWideElectric.net
+1 (800) 808-2131 2017-2018 Gear Reducers STOCK PRODUCTS CATALOG ndustry DRVNG & Controlling WorldWideElectric.net VST OUR WEBSTE www.worldwideelectric.net Table Of Contents SHAFT MOUNT REDUCERS PAGE MULTPLER
More informationALL PRODUCTS CATALOG
ALL PRODUCTS CATALOG W E P R OV I D E S O L U T I O N S WE LISTEN Define your critical application and business needs, and we ll help you determine the right path to success. AND PROVIDE SOLUTIONS. We
More informationSUGGESTED SPECIFICATIONS
PART 1 - GENERAL 1.01 SCOPE A. Pumps to be supplied under this specification shall be of a severe duty, recessed cupped impeller design suitable for use in (SLUDGE, GRIT, ETC. APPLICATIONS) with a 20 year
More informationBulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter
Bulletin C 1.2.34.5 Dean Pump Division ANSI/ASME B73.1 Horizontal Process ph2140 Telescoping Guard ph2140 C-Face Adapter Dean Pump Series ph Centrifugal Process Pumps Capacities to 3200 GPM (726 m 3 /hr)
More informationVal-Matic 3-72 Cam-Centric Plug Valve
Manual No. CCPV-OM2-8 Val-Matic 3-72 Cam-Centric Plug Valve Operation, Maintenance and Installation Manual INTRODUCTION... 2 RECEIVING AND STORAGE... 2 DESCRIPTION OF OPERATION... 2 VALVE CONSTRUCTION...
More informationTrash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service
Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Liquids Entrained with Solids General Industrial, Pulp & Paper,
More informationDISASSEMBLY AND ASSEMBLY
205-03-1 Front Drive Axle/Differential Ford 8.8-Inch Ring Gear 205-03-1 DISASSEMBLY AND ASSEMBLY Axle Front Drive Special Tool(s) 2-Jaw Puller 205-D072 (D97L-4221-A) Special Tool(s) Carrier Bearing Replacer
More information1999 F-150/250 Workshop Manual
Page 1 of 30 SECTION 205-03: Front Drive Axle/Differential Ford 8.8-Inch Ring Gear 1999 F-150/250 Workshop Manual DISASSEMBLY AND ASSEMBLY Procedure revision date: 01/08/2003 Axle Front Drive Special Tool(s)
More information