NSF International Certified. Polished matte finish maintains clean appearance throughout operation. Optional high. pressure washdown.

Transcription

1 SS700 Series Worm Gear Speed educers IP69 When ordered with high pressure washdown seal option* Trusted Worm Gearing with a evolutionary Smooth xterior NS International ertified Polished matte finish maintains clean appearance throughout operation Laser marked nameplate provides worry-free part identification while maintaining a smooth, unetched surface The Original Domed rown rounded housing prevents foreign matter adherence and fluid accumulation 316 Stainless Steel housing, motor flange and carrier to withstand tough washdown environments Metal detectable covers for all hardware and counter bored holes prevent particle accumulation and pooling fluids to optimize washdown efficiency Quill-Style Motor Mount or Q Quick- onnect oupling Motor Mount vailable Optional Stainless Steel output flange or torque arm mounting Double lipped shaft seals ensure superior performance and leak resistance Optional high pressure washdown seal available* Motor flange design incorporates an O-ring to minimize ingress of particles or fluids lange features (2) jackbolt holes for easy motor dismount Motor frame sizes 56 to 180T Two-piece mounting base maintains standard 700 Series footprint and enables the unit to be washed down without trapping foreign matter under the reducer 1 ood grade lubersynth U maximizes torque capacity and efficiency Large oil reservoir provides highly efficient heat dissipation and lubrication for longer operating life. Up to 20% more oil capacity than standard 700 series. Integral input worm and shaft design made from high strength case hardened alloy steel igh pressure angle and proprietary polishing on worm provides greater operating efficiency vailable in hollow and solid output shafts 303 Stainless Steel output shafts igh strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities. P-1998-BG 4/18 4

2 SS700 Series Worm Gear Speed educers Ordering Information Single eduction Worm Speed educer xample: SS732B-30T-B7-S1-P20-UTSS-3 SS 7 32 B 30 Style Blank Solid Shaft BostMount ollow SS Stainless Steel Material Quill Style Motor lange Q Quick onnect Motor lange (lose oupled) 700 Series enter Distance (Inches) Base Blank No Base B orizontal Base V lange - ight Mount W lange - Left Mount T rm (Ships separately as kit) eduction atio To Lubrication Blank No Lubrication lubersynth U ood-grade Double eduction Worm - Planetary Speed educer xample: SSWP732B-300T-B5-S1-P20 SS WP 7 32 B 300 Style Blank Solid Shaft BostMount ollow SS Stainless Steel Material Quill Style Motor lange Q Quick onnect Motor lange (lose oupled) Planetary Multiplier 700 Series enter Distance Base Blank No Base B orizontal Base V lange - ight Mount W lange - Left Mount T rm (Ships separately as kit) eduction atio To Double eduction Worm - Worm Speed educer SS WB xample: SSWB732B-3600T-B5-LS1-P B 3600 Style Blank Solid Shaft BostMount ollow SS Stainless Steel Material Quill Style Motor lange Q Quick onnect Motor lange (lose oupled) 700 Series & Style WB Double eduction Parallel Shafts WD Double eduction ight ngle Shafts enter Distance (Inches) Base Blank No Base B orizontal Base V lange - ight Mount W lange - Left Mount T rm (Ships separately as kit) eduction atio To P-1998-BG 4/18

3 SS700 Series Worm Gear Speed educers T B7 S 1 P20 UTSS 3 Seal Options Blank Standard Seals T Double Seals igh pressure washdown output seals and double input seals IP69 BO OD NM Motor Mounting NM INPUT MOUNTING BO YWY SIZS B4 42Z.500 1/8 x 1/16 B /16 x 3/32 B7 140T/ /16 x 3/32 B9 180T/ /4 x 1/8 Shaft 303 Stainless Steel (when facing input) GS Stainless Projection - Left S Stainless Double Projection S Stainless Projection - ight Mounting Positions 1 Standard Mounting (Worm Over) 2-6 efer to Mounting Positions on Page 7 BostMount Bore ode Blank - Solid Shaft Specified in 1/16" increments. See Table 1 on Page 7 x: 1-1/4" = P20 Motor -ace Motor Blank No Motor See Table 2 on Page 7 Motor onduit Box Orientation (When looking at fan end of motor and gearbox is in mounting position #1) 0 12 O clock 3 3 O clock (standard for G & shaft assemblies) 6 6 O clock 9 9 O clock (standard for shaft assemblies) T B5 S 1 P20 Lubrication Blank No Lubrication lubersynth U ood-grade BO OD Seal Options Blank Standard Seals T Double Seals igh pressure washdown output seals and double input seals IP69 NM Motor Mounting NM MOUNTING INPUT BO YWY SIZS B /16 x 3/32 Shaft 303 Stainless Steel (when facing input) GS Stainless Ouput Projection - Left S Stainless Double Projection S Stainless Projection - ight Mounting Positions 1 Standard Mounting (Worm Over) 2-6 efer to Mounting Positions on Page 7 BostMount Bore ode Blank - Solid Shaft Specified in 1/16" increments. See Table 1 on Page 7 x: 1-1/4" = P20 Motor -ace Motor Blank No Motor See Table 2 on Page 7 Motor onduit Box Orientation (When looking at fan end of motor and gearbox is in mounting position #1) 0 12 O clock 3 3 O clock (standard for G & shaft assemblies) 6 6 O clock 9 9 O clock (standard for shaft assemblies) T B5 LS 1 P20 Lubrication Blank No Lubrication Provided lubersynth U ood-grade Seal Options Blank Standard Seals T Double Seals igh pressure washdown output seals and double input seals IP69 NM Motor Mounting Bore ode NM Mounting Bore eyway Sizes B4 42Z.500 1/8 x 1/16 B /16 x 3/32 B7 140T/ /16 x 3/32 Shaft 303 Stainless Steel (when facing input of base housing) MS Stainless Ouput Projection - Left LS Stainless Double Projection S Stainless Projection - ight BostMount Bore ode Blank - Solid Shaft Specified in 1/16" increments. See Table 1 on Page 7 x: 1-1/4" = P20 Mounting Positions 1 Standard Mounting (Worm Over) 2-6 efer to Mounting Positions on Page 7 Motor -ace Motor Blank No Motor See Table 2 on Page 7 Motor onduit Box Orientation (When looking at fan end of motor and gearbox is in mounting position #1) 0 12 O clock 3 3 O clock (standard for M & L shaft assemblies) 6 6 O clock 9 9 O clock (standard for shaft assemblies) P-1998-BG 4/18 6

4 SS700 Series Worm Gear Speed educers Ordering Information orizontal Base its for SS700 Series (If ordered separately) Size it XSS B XSS B XSS B XSS B XSS B XSS B XSS B it includes (2) feet, (4) attaching bolts and (4) hardware covers. Table 1: ollow Shaft Bore odes raction Decimal ey Size Bore Size* Size ode 5/8 P10 S x.125 x /4 P x.156 x /8 P x.156 x /16 P x.218 x P16 S S S S S x.218 x /8 P x.218 x /16 P19 S S x.218 x /4 P20 S S S x.218 x /16 P23 S S S S x.312 x /2 P24 S S x.312 x /16 P31 S x.375 x P x.375 x /16 P x.375 x 2.00 eplacement ardware overs ousing Bearing Mounting Motor lange Size Oil Plugs arrier eet lange B5/B7 B9 (56/140T) (180T) N/ N/ & & & & & & & has nominal O.D of 0.605" has nominal O.D. of 0.812" Material: Stainless Steel disk (metal detectable) with over-molded rubber Table 2: Stainless Steel Motors Part # Type rame Size UT-SS 0.5 TNV 56 GUT-SS 0.75 TNV 56 UT5/8-SS 1.0 TNV 56 UT5/8-SS 1.0 T 56 UT-SS 1.0 TNV 140T UT-SS 1.0 T 140T UT-SS 1.5 T 140T UT-SS 2.0 T 140T LUT-SS 3.0 T 180T MUT-SS 5.0 T 180T TNV = Totally enclosed, non-ventilated T = Totally enclosed, fan-cooled *Bore tolerance /.0000 S Standard Bore Included in xpress Program Optional Bore ectangular key is provided with reducer to fit hollow shaft. Drive shaft requires standard width and depth keyway. Note: or all other bore sizes, contact factory. Mounting Positions & Lubrication Oil Levels or Typical Mounting Positions (xamples shown for single-reduction models only) MOTO OIZONTL LOO LOO 1 3 LOO LOO Indicates proper oil level. 2 4 MOTO VTIL LOO LOO Double input seals are recommended for all positions except #1 and #5. 5 NOT OMMNDD NOT: Double input seals are required for all positions except #1 and #5. 6 nclosed Worm Gear educers Lubricant vailable from Boston Gear mbient (oom) Temp. -20 to 225 ** (-29 to 107 ) Oil apacity in luid Ounces Unit Size ecommended Oil (or equivalent) lubersynth* U Synthetic 1 ood Grade Oil Viscosity ange 100 ISO Viscosity Grade No. Positions & Double reduction stainless gearboxes require the primary and secondary boxes to be filled independently to their respective mounting position. lubersynth U Qt. Part No. 1950/ * Synthetic recommendation is exclusively lubersynth U , other lubricants will reduce performance ratings. ** The lubersynth U lubricant will perform at temperatures considerably higher than 225. owever, the factory should always be consulted prior to operating at higher temperatures, as damage may occur to oil seals and other components. 7 P-1998-BG 4/18

5 SS700 Series Single eduction Single eduction atios and Performance Series Size atio PM PM Overhung Load* 200 lbs 300 lbs 500 lbs 700 lbs. 900 lbs 1000 lbs 1300 lbs Shaft Thrust Load 300 lbs 400 lbs 500 lbs 700 lbs 800 lbs 900 lbs 1100 lbs atings shown reflect maximum gear capacity based on GM standards (Service actor = 1.0) with lubersynth U *Overhung Load is at centerline of output shaft projection and with NO TUST Load. Note: or input speeds above 1750 PM, do NOT exceed maximum listed input horsepower. P-1998-BG 4/18 8

6 SS700 Series Double eduction atios and Performance Worm-Planetary Double eduction (WP) atio Series Size SS_WP713 SS_WP715 SS_WP718 SS_WP721 SS_WP724 SS_WP726 SS_WP732 PM PM Overhung Load* 200 lbs 300 lbs 500 lbs 700 lbs 900 lbs 1000 lbs 1300 lbs Shaft Thrust Load 300 lbs 400 lbs 500 lbs 700 lbs 800 lbs 900 lbs 1100 lbs Stand-lone Planetary SSSP5 and SSSP5 atio PM PM atings shown reflect maximum gear capacity based on GM standards (Service actor = 1.0) with lubersynth U Worm-Planetary and Stand-lone Planetary gearing is not recommended for use in applications with repetitive vibrational or impact loading. *Overhung Load is at centerline of output shaft projection and with NO TUST Load. Note: or input speeds above 1750 PM, do NOT exceed maximum listed input horsepower. Worm-Worm Double eduction (WB & WD) atio Series Size SS_WB/WD713 SS_WB/WD718 SS_WB/WD721 SS_WB/WD726 SS_WB/WD732 PM PM Overhung Load* 200 lbs. 500 lbs. 700 lbs lbs lbs. Shaft Thrust Load 300 lbs. 500 lbs. 700 lbs. 900 lbs lbs. atings shown reflect maximum gear capacity based on GM standards (Service actor = 1.0) with lubersynth U *Overhung Load is at centerline of output shaft projection and with NO TUST Load. Note: or input speeds above 1750 PM, do NOT exceed maximum listed input horsepower. 9 P-1998-BG 4/18

7 SS700 Series Single eduction, With and Without Base Dimensions S SS700 & SSQ700 ollow Shaft without Base (2) Q socket setscrews 120 apart both sides key Z SS700 & SSQ700 ollow Shaft with Base (2) Q Socket Setscrews 120 apart both sides key Z S U2 Y N2 1 D1 B1 N P1 (4) T1 tapped holes S U2 Y 2 D2 B2 N2 N G P2 (4) T2 holes GS S S SS700 & SSQ700 GS Solid Shaft without Base key W SS700 & SSQ700 GS Solid Shaft with Base key W 1 1 D1 B1 N1 M1 V ØU P1 (4) T1 tapped holes SIZ 2 B1 B2 1 2 D1 D G 2 D2 B2 M2 N1 V ØU P2 (4) T2 holes SIZ G Q700 NW 1 2 M1 M2 N1 N2 P1 P2 Q 56/140T 180T 56/140T 180T # # # / / / /16-24 SIZ T2 S T1 'Bore/ U1 Max pprox. Weight (lbs.) ole Dias. U2* V W Y Z 56/140T 180T/210T SS700 SS700 SS700B SS700B / /16 x * / / /16 x * / / /16 x * / / /4 x 1-1/ * / / /4 x 1-1/ * / / /4 x 1-15/ * / / /16 x 2-7/ * * efer to Table 1 on page 7. 42Z lange Dimensions: (Q713 Only) = 4.15; =2.16 P-1998-BG 4/

8 SS700 Series Single eduction, With lange Dimensions SS700W & SSQ700W ollow Shaft, W Position ey W N U2 S W lange (vailable for all sizes) 45º 45º (4) T Dia. oles on B L P M (2) B Socket Setscrews 120º part Both nds SS700V & SSQ700V ollow Shaft, V Position ey W S U2 N V lange (Not available for sizes 718 & 721) (2) B Socket Setscrews 120º part Both nds M P L 45º 45º (4) T Dia. oles on B SIZ B B.. 56/140T 180T 56/140T 180T # # # / / / / T** Low Speed Shaft ollow Bore pprox SIZ M N P S Weight 56/140T 180T/210T ole -Bore Dia Dia W - ey Max U2* (lbs.) Sq. Length * * * * * * * * * * * * * * 80 * efer to Table 1 on page 7. ** Designed for use with socket head capscrews. 42Z lange Dimensions: (Q713 Only) = 4.15; = Q700 NW 11 P-1998-BG 4/18 L

9 SS700 Series Single eduction, With rm Dimensions SS700T & SSQ700T ollow Shaft, T rm enterline of D T rm (Shown assembled to SS700 but ships separately as kit) B.625 Ø.411 2X Bolt Size it atalog Number B D Bolt* 713 XSS IT /16-18 X 1 /2 715 XSS IT /16-18 X 1 /2 718 XSS IT /16-18 X 1 /2 721 XSS IT /8-16 X 5/8 724 XSS IT /8-16 X 5/8 726 XSS IT /8-16 X 3/4 732 XSS IT /16-14 X 7/8 *Stainless hex head bolt (x2) supplied. SS700 WP Series Double eduction SSWP700 & SSQWP700 ollow Shaft Size 700 Q700 NW P1 56/140T 56/140T * /16 DI. P1 *Motor flange will drop below the bottom of the speed reducer. Same dimensions for SSWP700 & SSQWP700 Solid Shaft Models. P-1998-BG 4/

10 SS700 WB Series Double eduction, Parallel Shafts Dimensions SSWB700 & SSQWB700 ollow Shaft ey See Bore hart or ey Sizes * O G N2 LS U2 P S (4) T tapped oles D B (2) Q Socket (2) Setscrews Setscrews 120 part 120º part (both sides) (both sides) V2 SSWB700 & SSQWB700 Solid Shaft O G N1 ey W MS P U1 LS (4) T tapped oles D B V1 S SIZ B D G 700 Q700 NW N1 N2 O P 56/140T 56/140T T Low Speed Shaft pprox Weight Solid Shaft ollow Bore SIZ Q 56/140T S Tap (lbs.) W - ey Size U1 V1 Max U2* V2 Sq. Length SSWB SSWB 713 # / / # / / / / /4 1-1/ / / /4 1-15/ / / /16 2-7/ * efer to Table 1 on page 7. 42Z lange Dimensions: (Q713 Only) = 4.15; = P-1998-BG 4/18

11 SS700 WD Series Double eduction, ight ngle Shafts Dimensions SSWD700 & SSQWD700 ollow Shaft O LS ey See Bore hart or ey Sizes G N2 P U2 S (4) T tapped oles D B V2 (2) Q Socket Setscrews 120º part (Both Sides) SSWD700 & SSQWD700 Solid Shaft O G N1 MS ey W U1 P LS S (4) T tapped oles P SIZ B D G 700 Q700 NW N1 N2 O 700 Q700 56/140T 56/140T 56/140T 56/140T SIZ Q T Low Speed Shaft pprox Weight Solid Shaft ollow Bore 56/140T S Tap (lbs.) W - ey Size U1 V1 Max U2* V2 Sq. Length SSWD SSWD 713 # / / # / / / / /4 1-1/ / / /4 1-15/ / / /16 2-7/ * efer to Table 1 on page 7 42Z lange Dimensions: (Q713 Only) = 4.15; =2.16; P=7.20 P-1998-BG 4/18 D B V1 NW 14

12 Notes 15 P-1998-BG 4/18