Electromechanical products Multibloc General information

Transcription

1 General information geared motors with worm and wheel gears are used to adapt the speed of the electric motor to that of the driven machine. Their size is therefore determined by the motor power (P) epressed in kilowatts (kw) and the output rotation speed of the gear bo (n S ) in revolutions per minute (min -1 ). The main characteristic of the speed reducers is the rated output torque (M ns ) epressed in Newton-metres (N.m) : P 9550 M ns = efficiency n S A range of si sizes : 31, 22, 23, 24,25, 26. ated output torque : from 20 N.m to 1500 N.m. Power rating : from 0.18 to 9 kw. eduction ratios : from 5.2 to 100. fficiency : 55 % to 88 %. Silent operation. Construction Description of Multibloc (Mb) gearboes Component Materials emarks Housing Cast iron - use of GL cast iron (flake graphite: tensile strength 150 MPa) single component perlite to ensure the complete sealing of the unit - monobloc with reinforced internal ribbing to absorb vibrations and noise and to increase rigidity - with NU housing, it becomes general - puropse for sizes 22, 23, 24, 25 by the adaptation of S basplate or BS, BD flanges or (+ Mb 31) torque arm kit. They are compact and meet industrial application related requirements Wheel Worm Bronze Steel - moulded around steel or cast iron inserts, blocked with respect to the worm, supported by two large diameter bearings without intermediate shields (ecepting Mb 26) - cut on whirl lathe, tempered and ground Shafts Steel - grinding of the sealing surfaces - hollow cylindrical or output with key in accordance with SO diameter tolerance h6 for output shaft and H7 for hollow shaft - tapped holes at output shaft end in accordance with DN 332 form D for mounting connecting equipment Seals Nitrile - anti-dust lipseals according to DN 3760 form AS - ground sealing surfaces nd shields Cast iron - on size 26, reinforced by large ribs, ensuring ruggedness of the gearbo under heavy loads Lubrication Oil - in accordance with SO 6743 / 6 - delivered with the quantity of oil corresponding to a multi-position operation, it is fitted with drain, level and vent plugs (ecepting Mb 31) Mounting AP : input shaft gearbo (ecepting Mb 31) MU (T or ) : geared motor with C motor, with universal mounting Standard motor LS : - multi-voltage 220/ / /415 - pressed steel fan cover, on request fitted with a drip cover for operation in vertical position (shaft facing down) - metal terminal bo fitted with cable gland - P 55 standard protection Brake motors C : failsafe brake asynchronous motor, ranging from 0.18 to 9 kw, P 55 protection Other motors See pages D0.7 to D0.9 inish Paint Shade : AL 6000 (green), system (1 polyurethane vinyl layer of 25/30 µm) D9.1

2 Standard position: gearbo seen from side, motor to the rear, side D facing the ground. 1 - Mounting Mounting - operating positions D NU NSD NS NSU NSK BSL BDL BNL 2 - Output shaft 3 - Option H H L H H L K 4 - Position NU, NS D, NS U, mounting B3 B6 B7 B8 5 6 BS, BN, BD mounting B5 B52 B53 B Terminal bo positions Cable gland positions D A B C 2 A 1 Non-brake motor 1 Brake motor D9.2

3 Adaptation possibilities Leroy-Somer offers several drives for its gearboes which rmeet a diverse range of needs. They are described below and offered in this catalogue in the section relating to gearboes. or other drives, consult Leroy-Somer technical specialists who will be pleased to assist you. Multibloc gearboes can be used in conjunction with the following drives : OUTPUT SHAT BOX HOUSNG D SYSTM 3-phase asynchronous motors : - LS motors from 0.18 to 9 kw, - C brake motor from 0.18 to 9 kw, Hollow cylindrical NU standard electronic variable speed motors : centralised system with separate drive - LSM motor from 0.25 to 9 kw, - LSM brake motor from 0.25 to 9 kw. Solid cylindrical on left or right NS baseplate MU-T or MU- universal mounting B5 or B14 C standard electric motor decentralised system with built-in drive - AMCA from 0.25 to 9 kw. AP input shaft Solid etenbded cylindrical BS, BN, BD flange Solid cylindrical dual Torque arm supplied in kit K Designation / Coding Mb 2301 B3 NS D H 20 MU-T 4P LS kw 230/ Hz UG Gearbo type Size Operating position Mounting type Mounting position Output shaft definition act reduction nput type No. of poles Series, frame size, manufacturer inde ated power oltage and mains frequency Use Codification eample : Multibloc Mb kw, 72 min -1, class Designation Code Mb 2301 B3 NS D H 20 MU-T 4P, LS kw - All the products in this catalogue have a code. The coding table is incorporated in the price list with the list of designations. ach electromechanical product is classified first in order of power and then in order of speed. D9.3

4 Selection The selection of a gearbo or of a geared motor should take account of the application. Some of these applications are listed in the indicative AGMA load classification, page D0.10. The opposite table summarises the relationship between the AGMA class and the gearbo duty factor K p. AGMA class Gearbo duty factor K p NB : n the case of worm and wheel gearboes such as, the operating factor must be taken into account, that is the operating time at full load in relation to the total daily operating time of the gearbo. n this catalogue, selection is made for an operating factor of 50 %. or an operating factor of 100 %, class becomes class, and class becomes class. (Kp multiplied by 1.4). ollow the indicative AGMA load classification table, page D0.10 of this catalogue. 1 st case. Your application is listed ndicative AGMA load classification Application eample : Belt CONYO Operating time: 10 hours/day Applications OPATON in hours / day 3h/day 10h/day 24h/day CONYOS (loaded or fed uniformly) belt chain AGMA class : Gearbo duty factor K p = 1 2 nd case. Your application is not listed The AGMA selection class is defined by the daily operating time and by the application operating type, according to the table below. Type of application Daily operating time AGMA class Shock-free, few starts 10 hours / day Damped shocks Shock-free, few starts 10 hours / day 24 hours / day iolent shocks, many starts Damped shocks 10 hours / day 24 hours / day D9.4

5 Selection Mb 3101, Mb 2000 : NU, NS, BS,BN,BD LS, LS brake C - P 55 - Cl Υ - 50 Hz nputs 1 AP - LS LS C 1. MU-T (B14) : MU- (B5) 2. MU- (B5) only Maimum quantity Mb 3101 Mb 2201 Mb 2301 Mb 2401 Mb 2501 Mb kw/8p kw/4p kw/4p kw/4p kw/8p kw/4p kw/4p kw/4p Mechanical options NU H NS H BSL H BDL H BNL H K BT L H NU HL NS HL BSL HL BDL HL BNL HL Mb Mb Mb Mb Mb Mb Page(s) of dimensions corresponding to mounting Mounting NU H NS H BSL H BDL H BNL H K BT L H NU HL NS HL BSL HL BDL HL BNL HL AP H shaft D9.10 D9.14 D9.16 D9.16 D9.14 D HL, H shaft D9.11 D9.13 D9.15 D9.17 D D9.11 MU-T H shaft D9.18 D9.22 D9.26 D9.30 D9.26 D9.34 D9.18 HL, H shaft D9.20 D9.24 D9.28 D9.32 D MU- H shaft D9.19 D9.23 D9.27 D9.31 D9.27 D9.34 D9.19 HL, H shaft D9.21 D9.25 D9.29 D9.33 D nputs lectrical options Brake options 4p / MU 230/ Δ PTO/CTP DLA Drip cover T Different Mf J01 LS kw LS C 4-9 kw kw kw kw - D9.5

6 Selection Class (Kp=1) The types of 8-pole motors and associated gearboes are in bold italics < LS 71, 80 : B14 T 85, ba obligatory < LS 90 : B5 130, ba obligatory < LS 100 : B5 165, ba obligatory > LS 80 : B14 T 100, ba obligatory < 2601 < LS 132 : B5 165, ba obligatory. Mb 3101, Mb 2000 : NU, NS, BS,BN,BD LS, LS brake C - P 55 - Cl Υ - 50 Hz - UG Mb 3101, Mb 2000 LS M B14 or M B5 C (kw) LS 4 p LS 8p min -1 i > < < < < < < < < < < < < < < < < < < < < < < < Brake motors LS B14 C or B5 LS 4 p C LS 8p C act reductions eduction indices Type Mb Mb Mb Mb Mb Mb ample of selection : equired power : 1.1 kw equired speed : 70 min -1 Duty factor necessary for the application : K = 1 Mounting : baseplate, hollow shaft Designation : Mb NS D H 20 MU- - 4P LS kw - 230/ Hz - U.G. D9.6

7 Selection Class (Kp=1.4) The types of 8-pole motors and associated gearboes are in bold italics < LS 71, 80 : B14 T 85, ba obligatory < LS 90 : B5 130, ba obligatory < LS 100 : B5 165, ba obligatory >, LS 80 : B14 T 100, ba obligatory <, 2601 < LS 132 : B5 165, ba obligatory. Mb 3101, Mb 2000 : NU, NS, BS,BN,BD LS, LS brake C - P 55 - Cl Υ - 50 Hz - UG Mb 3101, Mb 2000 LS M B14 or M B5 C (kw) LS 4 p LS 8p min -1 i > > > < < < < < < 2401 < < < < < < < < < < < Brake motor LS B14 C or B5 LS 4 p C LS 8p C act reductions eduction indices Type Mb Mb Mb Mb Mb Mb ample of selection : equired power : 1.1 kw equired speed : 70 min -1 Duty factor necessary for the application : K = 1.4 Mounting : baseplate, hollow shaft Designation : Mb 2301 B3 NS D H 20 MU-T - 4P LS kw - 230/ Hz - U.G. D9.7

8 Class (Kp=2) The types of 8-pole motors and associated gearboes are in bold italics < LS 71, 80 : B14 T 85, ba obligatory < LS 90 : B5 130, ba obligatory < LS 100 : B5 165, ba obligatory >, LS 80 : B14 T 100, ba obligatory <, 2601 < LS 132 : B5 165, ba obligatory. Selection Mb 3101, Mb 2000 : NU, NS, BS,BN,BD LS, LS brake C - P 55 - Cl Υ - 50 Hz - UG Mb 3101, Mb 2000 LS M B14 or M B5 C (kw) LS 4 p LS 8p min -1 i > > > > > > < < < < < Brake motors LS B14 C or B5 LS 4 p C LS 8p C act reductions eduction indices Type Mb Mb Mb Mb Mb Mb ample of selection : equired power : 1.1 kw equired speed : 70 min -1 Duty factor necessary for the application : K = 2 Mounting : baseplate, hollow shaft Designation : Mb 2401 B7 NS D H 20 MU-T - 4P LS kw - 230/ Hz - U.G. D9.8

9 of form Mb 3101 and Mb 2201 to Mb 2601 in millimetres Ø DB h6 Ø DB h6 GB Ø DB h6 Ø DB h6 GB W B O Z Hc screws C WB W B O Z B solid output shaft H L or H solid output shaft H L solid output shaft H L or H, for flange Solid output shaft Type D DB B C O Z W Hc screw Mb M M5 Mb M M5 Mb M M5 Mb M M5 Mb M M5 Mb M M5 W T 1 Ø 4 S / Ø M Ø Ø MC Ø N j6 Ø B Hc screws T WB 1 - Spigot on output housing 2 - Housing input, output flange 3 - emovable locking collar on shaft H L Type N T PN CP MC B T 1 M S W Hc screw WB Mb H6 120 M M5 8 Mb H6 110 M M5 8 Mb H6 105 M M5 8 Mb H6 84 M M5 8 Mb H6 82 M M5 8 Mb M Spigot depth. 2. Option for Mb 2601 BT. 3. BD flange type = 70. D9.9

10 of Multibloc (Mb) gearboes, AP input shaft mounting, Mb 2201 to Mb 2601 in millimetres - NU standard, H hollow shaft A A XA XB A 4 S / Ø M H GC OA ZA Ø DA Ø M 2 XA XB X XA XB H 4 S2 PN Ø N H7 MC T 1. Option for Mb 2601 BT : M2 = 165, S2 = 6 M NU gearbo Type H M2 A S2 X XA XB X Mb M Mb M M Mb M M Mb M M Mb M M Weight kg nput shaft Hollow output shaft Type DA A A GC OA D Mb j M Mb j M Mb j M MB j M Mb j M Spigot on housing Mounting on gearbo input Type N T MC PN M S Mb M12 20 Mb M10 16 Mb M8 12 Mb M8 12 Mb M Option for Mb 2601 BT. D9.10

11 of Multibloc (Mb) gearboes, AP input shaft mounting, Mb 2201 to Mb 2601 in millimetres - NU standard, H L, H or H L solid shaft A A A XA XB 4 S / Ø M Ø DB h6 H GC OA ZA Ø DA Ø M 2 XA XB O Z B W X XA XB H 4 S2 PN Ø N H7 MC T Hc screws C WB NU gearbo Weight kg Type H M2 A S2 X XA XB X H or H L H L Mb M Mb M M Mb M M Mb M M Mb M M Option for Mb 2601 BT : M2 = 165, S2 = 6 M nput shaft Solid output shaft Type DA A A GC OA ZA D DB B C O Z W Mb j M M Mb j M M Mb j M M Mb j M M Mb j M M Option for Mb 2601 BT. Spigot on housing, screw and washer of HL or H shaft, locking collar on HL shaft Mounting on gearbo input Type N T MC PN Hc screw WB M S Mb M M12 20 Mb M M10 16 Mb M M8 12 Mb M M8 12 Mb M M6 10 D9.11

12 of Multibloc (Mb) gearboes, AP input shaft mounting, Mb 2201 to Mb NS D baseplate [NS or NS U], H hollow shaft in millimetres A A H A H HA GC ØDA HU OA ZA HC B BB 4 K = A AB = NS gearbo Weight Type A AB B BB H HA HC H HU K A kg Mb Mb Mb Mb Mb nput shaft Hollow output shaft Type DA A A GC OA ZA D Mb j M Mb j M Mb j M Mb j M Mb j M D9.12

13 of Multibloc (Mb) gearboes, AP input shaft mounting, Mb 2201 to Mb NS D baseplate [NS or NS U], H L, H or H L solid shaft in millimetres A A H A Ø DB h6 H GC OA ZA Ø DA HU HA HC O Z B C B BB 4 K = A AB = NS gearbo Weight kg Type A AB B BB C H HA HC H HU K A H or H L H L Mb Mb Mb Mb Mb nput shaft Solid output shaft Type DA A A GC OA ZA D DB B C O Z C Mb j M M Mb j M M Mb j M M Mb j M M Mb j M M D9.13

14 of Multibloc (Mb) gearboes, AP input shaft mounting, Mb 2201 to Mb BS standard flange (or flange without BN spigot), H hollow shaft in millimetres A A A H A HU P N j6 H GC Ø DA OA ZA M T LA 4 S Gearbo with flange BS or BN flange Weight Type H HU A A M N 1 P LA S T 1 kg Mb Mb Mb Mb Mb BN flange without spigot : N j6 = 0 and T = 0. nput shaft Hollow output shaft Type DA A A GC OA ZA D Mb j M Mb j M Mb j M Mb j M Mb j M D9.14

15 of Multibloc (Mb) gearboes, AP input shaft mounting, Mb 2201 to Mb BS standard flange (or flange without BN spigot), H L, H or H L solid shaft in millimetres A A A H A P N j6 Ø DB h6 H GC OA ZA Ø DA M HU O Z T LA 4 S B Gearbo with flange BS or BN flange Weight kg Type H HU A A M N 1 P LA S T 1 H or H L H L Mb Mb Mb Mb Mb BN flange without spigot : N j6 = 0 and T = 0. nput shaft Solid output shaft Type DA A A GC OA ZA D DB B O Z Mb j M M Mb j M M Mb j M M Mb j M M Mb j M M D9.15

16 of Multibloc (Mb) gearboes, AP input shaft mounting, Mb 2201 to Mb BD flange, H hollow shaft in millimetres A A A H A HU P N j6 H GC Ø DA OA ZA M T LA 4 S Gearbo with flange BD flange Weight kg Type H HU A A M N P LA S T Mb consult us 51 Mb Mb Mb Mb nput shaft Hollow output shaft Type DA A A GC OA ZA D Mb j M10 22 consult us Mb j M Mb j M Mb j M Mb j M D9.16

17 of Multibloc (Mb) gearboes, AP input shaft mounting, Mb 2201 to Mb 2601 in millimetres - BD flange, H L, H or H L solid shaft A A A H A P N j6 Ø DB h6 H GC OA ZA Ø DA M HU O Z T LA 4 S B Gearbo with flange BD flange Weight kg Type H HU A A M N P LA S T H or H L H L Mb consult us Mb Mb Mb Mb Attention : the shoulder of the shaft is recessed 12 mm in relation to the flange face. nput shaft Solid output shaft Type DA A A GC OA ZA D DB B O Z Mb j M M Mb j M M Mb j M M Mb j M M Mb j M M D9.17

18 HJ of Multibloc (Mb) geared motors, MU-T universal mounting, with M 3601 (M B14) motor, Mb 3101, Mb 2201 to Mb 2601 in millimetres - NU standard, H hollow shaft LB U XA XB H PN Ø N H7 MC Ø AC Ø M 2 XB XA Ø PU X T Details on Mb 3101 XA XB H 4 S2 H B XB XB HG 4 S2 / Ø M2 1. Option for Mb 26 BT : M2 = 165, S2 = 6 M See details of Mb 3101 : HG = 45 and B = 127 (driling on side on request), XA does not eist. 1. Option for Mb 2601 BT 1. C J01 to J Attention : motor with larger C flange and shaft etension. 3. Attention : motor with smaller C flange and shaft etension. 4. for Mb 3101, input flange integrated into the housing, that is + U = 75 NU gearbo Type D H M2 S2 X XA XB X Mb M Mb M M Mb M M Mb M M Mb M M Mb M M Spigot on housing Hollow output shaft Type N T MC PN Type D Mb Ø186 1 Mb Mb Mb Mb Mb Mb Mb Mb Mb Asynchronous motors, brake and gearboes 3-phase LS LS and C 1 brake Gearboes rame Weight Weight size AC HJ LB LJ kg AC HJ LB LJ kg U 4 PU U PU U PU U PU U PU U PU Weight kg D9.18

19 HJ of Multibloc (Mb) geared motors, MU- universal mounting, with M 3001 (M B5) motor, Mb 2201 to Mb NU standard, H hollow shaft in millimetres LB U XA XB Ø D H7 H PN Ø N H7 MC Ø AC Ø M 2 XB XA X T Ø PU XA XB H 4 S2 1. Option for Mb 26 BT : M2 = 165, S2 = 6 M Option for Mb 2601 BT 1. C J01 to J Attention : motor with larger C flange and shaft etension. 3. Attention : motor with smaller C flange and shaft etension. NU gearbo Type D H M2 S2 X XA XB X Mb M Mb M M Mb M M Mb M M Mb M M Spigot on housing Hollow output shaft Type N T MC PN Type D Mb Ø186 1 Mb Mb Mb Mb Mb Mb Mb Mb Mb Asynchronous motors, brake and gearboes 3-phase LS LS and C 1 brake Gearboes rame Weight Weight size AC HJ LB LJ kg AC HJ LB LJ kg U PU U PU U PU U PU U PU Weight kg D9.19

20 HJ of Multibloc (Mb) geared motors, MU-T universal mounting, with M 3601 (M B14) motor, Mb 3101, Mb 2201 to Mb 2601 in millimetres - NU standard, H L, H or H L solid shaft LB U XA XB Ø DB h6 H MP Ø N H7 MC Ø AC Ø M 2 XB XA Ø PU O Z B W X T Hc screws Details on Mb 3101 XA XB H 4 S2 B C WB H XB XB HG 4 S2 / Ø M2 1. Option for Mb 2601 BT : M2 = 165, S2 = 6 M See detail of Mb 3101 : HG = 45 and B = 127 (drilling on side on request), XA does not eist. 1. Option for Mb 2601 BT. 1. C J01 to J Attention : motor with larger C flange and shaft etension. 3.Attention : motor with smaller C flange and shaft etension. 4. for Mb 3101, input flange integrated into the housing, that is + U = 75 NU gearbo Weight kg Type D H M2 S2 X XA XB X H or H L H L Mb M Mb M M Mb M M Mb M M Mb M M Mb M M Spigot on housing Solid output shaft Type N T MC PN Type vis Hc WB DB B C O Z W Mb Ø186 1 Mb M M Mb Mb M M Mb Mb M M Mb Mb M M Mb Mb M M Mb Mb M M Asynchronous motors, brake and gearboes 3-phase LS LS and C 1 brake Gearboes rame Weight Weight size AC HJ LB LJ kg AC HJ LB LJ kg U 4 PU U PU U PU U PU U PU U PU D9.20

21 HJ of Multibloc (Mb) geared motors, MU- universal mounting, with M 3001 (M B5) motor, Mb 2201 to Mb 2601 in millimetres - NU standard, H L, H or H L solid shaft LB U XA XB Ø DB h6 H PN Ø N H7 MC Ø AC Ø M 2 XB XA O Z B W X T Ø PU XA XB H 4 S2 Hc screws Details on Mb 3101 C WB H B XB XB HG 4 S2 / Ø M2 NU gearbo Weight kg Type D H M2 S2 X XA XB X H or H L H L Mb M Mb M M Mb M M Mb M M Mb M M Option for Mb 26 BT : M2 = 165, S2 = 6 M Spigot on housing Hollow output shaft Type N T MC PN Type Hc screw WB DB B C O Z W Mb Ø186 1 Mb M M Mb Mb M M Mb Mb M M Mb Mb M M Mb Mb M M Option for Mb 2601 BT. Asynchronous motors, brake and gearboes 3-phase LS LS and C 1 brake Gearbo rame Weight Weight size AC HJ LB LJ kg AC HJ LB LJ kg U PU U PU U PU U PU U PU C J01 to J Attention : motor with larger C flange and shaft etension. 3. Attention : motor with smaller C flange and shaft etension. D9.21

22 HJ of Multibloc (Mb) geared motors, MU-T universal mounting, with M 3601 (M B14) motor, Mb 3101, Mb 2201 to Mb 2601 in millimetres - NS D baseplate [NS or NS U], H hollow shaft LB LJ U H H HA HC Ø AC HU Ø PU B BB 4 K = A AB = NS gearbo Type A AB B BB D H HA HC H HU K Mb Mb Mb Mb Mb Weight kg Hollow output shaft Type D Mb Mb Mb Mb Mb Asynchronous motors, brake and gearboes 3-phase LS LS and C 1 brake Gearboes rame Weight Weight size AC HJ LB LJ kg AC HJ LB LJ kg U PU U PU U PU U PU U PU U PU C J01 to J Attention : motor with larger C flange and shaft etension. 3. Attention : motor with smaller C flange and shaft etension. D9.22

23 HJ of Multibloc (Mb) geared motors, MU- universal mounting, with M 3001 (M B5) motor, Mb 2201 to Mb 2601 in millimetres - NS D baseplate [NS or NS U], H hollow shaft LB U LJ H H Ø AC HA HU HC B BB Ø PU 4 K = A AB = NS gearbo Type A AB B BB D H HA HC H HU K Mb Mb Mb Mb Mb Weight kg Hollow output shaft Type D Mb Mb Mb Mb Mb Asynchronous motors, brake and gearboes 3-phase LS LS and C 1 brake Gearboes rame Weight Weight size AC HJ LB LJ kg AC HJ LB LJ kg U PU U PU U PU U PU U PU C J01 to J03. 2.Attention : motor with larger C flange and shaft etension. 3. Attention : motor with smaller C flange and shaft etension. D9.23

24 HJ of Multibloc (Mb) geared motors, MU-T universal mounting, with M 3601 (M B14) motor, Mb 3101, Mb 2201 to Mb 2601 in millimetres - NS D baseplate [NS or NS U], H L, H or H L solid shaft LB U LJ H W Ø DB h6 B Ø D H7 H Ø AC HU HA HC O Z C B BB Ø PU 4 K = A AB = Hc screws WB C NS gearbo Weight kg Type A AB B BB C D H HA HC H HU K H or H L H L Mb Mb Mb Mb Mb Solid output shaft Type Hc screw WB DB B C O Z W Mb M M Mb M M Mb M M Mb M M Mb M M Asynchronous motors, brake and gearboes 3-phase LS LS and C 1 brake Gearboes rame Weight Weight size AC HJ LB LJ kg AC HJ LB LJ kg U PU U PU U PU U PU U PU C J01 to J Attention : motor with larger C flange and shaft etension. 3. Attention : motor with smaller C flange and shaft etension. Other diemnsions on page D9.9. D9.24

25 HJ of Multibloc (Mb) geared motors, MU- universal mounting, with M 3001 (M B5) motor, Mb 2201 to Mb NS D baseplate [NS or NS U], H L, H or H L solid shaft in millimetres LB U LJ H W Ø DB h6 B Ø D H7 H Ø AC HU HA HC O Z C B BB Ø PU 4 K = A AB = Hc screws WB C NS gearbo Weight kg Type A AB B BB C D H HA HC H HU K H or H L H L Mb Mb Mb Mb Mb Solid output shhaft Type Hc screw WB DB B C O Z W Mb M M Mb M M Mb M M Mb M M Mb M M Asynchronous motors, brake and gearboes 3-phase LS LS and C 1 brake Gearboes rame Weight Weight size AC HJ LB LJ kg AC HJ LB LJ kg U PU U PU U PU U PU U PU C J01 to J03. 2.Attention : motor with larger C flange and shaft etension. 3. Attention : motor with smaller C flange and shaft etension. D9.25

26 HJ of Multibloc (Mb) geared motors, MU-T universal mounting, with M 3601 (M B14) motor, Mb 3101, Mb 2201 to Mb Standard BS flange (or flange without BN spigot), H hollow shaft in millimetres LB U A LJ H P N j6 H Ø AC M HU Ø PU T LA 4 S 1. BN flange without spigot : Nj6 = 0 and T = See details of Mb 3101 page D open holes on radius. Gearbo with BS or BN flange Type D H HU A M N 1 P LA S T 1 Mb Mb Mb Mb Mb Mb Weight kg 1. C J01 to J Attention : motor with larger C flange and shaft etension. 3. Attention : motor with smaller C flange and shaft etension. 4. for Mb 3101, input flange integrated into the housing, that is + U = 75 Asynchronous motors, brake and gearboes 3-phase LS LS and C 1 brake Gearboes rame Weight Weight size AC HJ LB LJ kg AC HJ LB LJ kg U 4 PU U PU U PU U PU U PU U PU D9.26

27 HJ of Multibloc (Mb) geared motors, MU- universal mounting, with M 3001 (M B5) motor, Mb 2201 to Mb Standard BS flange (or flange without BN spigot), H hollow shaft in millimetres A LB LJ U H P N j6 H Ø AC M HU T LA Ø PU 4 S 1. BN flange without spigot : Nj6 = 0 and T = 0. Gearbo with BS or BN flange Type D H HU A M N 1 P LA S T 1 Mb Mb Mb Mb Mb Weight kg Hollow output shaft Type D Mb Mb Mb Mb Mb Asynchronous motors, brake and gearboes 3-phase LS LS and C 1 brake Gearboes rame Weight Weight size AC HJ LB LJ kg AC HJ LB LJ kg U PU U PU U PU U PU U PU C J01 to J Attention : motor with larger C flange and shaft etension. 3. Attention : motor with smaller C flange and shaft etension. D9.27

28 HJ of Multibloc (Mb) geared motors, MU-T universal mounting, with M 3601 (M B14) motor, Mb 3101, Mb 2201 to Mb Standard BS flange (or flange without BN spigot), H L, H or H L solid shaft in millimetres A LB LJ U H P N j6 Ø DB h6 H Ø AC M HU O Z T LA Ø PU 4 S B Gearboes with BS or BN flange Weight kg Type D H HU A M N 1 P LA S T 1 H or H L H L Mb Mb Mb Mb Mb Mb lange without spigot : Nj6 = 0 and T = See details of Mb 3101 page D open holes on radius. 1. C J01 to J Attention : motor with larger C flange and shaft etension. 3. Attention : motor with smaller C flange and shaft etension. 4. for Mb 3101, input flange integrated into the housing, that is + U = 75 Asynchronous motors, brake and gearboes 3-phase LS LS and C 1 brake Gearboes rame Weight Weight size AC HJ LB LJ kg AC HJ LB LJ kg U 4 PU U PU U PU U PU U PU U PU D9.28

29 HJ of Multibloc (Mb) geared motors, MU- universal mounting, with M 3001 (M B5) motor, Mb 2201 to Mb Standard BS flange (or flange without BN spigot), H L, H or H L solid shaft in millimetres LB U A LJ H P N j6 Ø DB h6 H HD Ø AC M HU O Z T LA Ø PU 4 S B Gearbo with BS or BN flange Weight kg Type D H HU A M N 1 P LA S T 1 H or H L H L Mb Mb Mb Mb Mb lange without spigot : Nj6 = 0 and T = 0. Solid output shaft Type DB B O Z Mb M16 36 Mb M16 36 Mb M12 28 Mb M10 22 Mb M10 22 Asynchronous motors, brake and gearboes 3-phase LS LS and C 1 brake Gearboes rame Weight Weight size AC HJ LB LJ kg AC HJ LB LJ kg U PU U PU U PU U PU U PU Additional brake weight. 2. C J01 to J Attention : motor with larger C flange and shaft etension. 4. Attention : motor with smaller C flange and shaft etension. D9.29

30 HJ of Multibloc (Mb) geared motors, MU-T universal mounting, with M 3601 (M B14) motor, Mb 3101, Mb 2201 to Mb BD flange, H hollow shaft in millimetres A LB LJ U H P N j6 H Ø AC M HU Ø PU T LA 4 S 1. See details of Mb 3101 page D open holes on radius. Gearbo with BD flange Type D H HU A M N P LA S T Mb 2601 consult us consult us 55.5 Mb Mb Mb Mb Mb Mb Hollow output shaft Weight kg Type D Mb 2601 consult us Mb Mb Mb Mb Mb C J01 to J Attention : motor with larger C flange and shaft etension. 3. Attention : motor with smaller C flange and shaft etension. 4. for Mb 3101, input flange integrated into the housing, that is + U = 75 Asynchronous motors, brake and gearboes 3-phase LS LS and C 1 brake Gearboes rame Weight Weight size AC HJ LB LJ kg AC HJ LB LJ kg U 4 PU U PU U PU U PU U PU U PU D9.30

31 HJ of Multibloc (Mb) geared motors, MU- universal mounting, with M 3001 (M B5) motor, Mb 2201 to Mb BD flange, H hollow shaft in millimetres A LB LJ U H P N j6 H Ø AC M HU T LA Ø PU 4 S Gearbo with BD flange Type D H HU A M N P LA S T Mb 2601 consult us consult us 57 Mb Mb Mb Mb Weight kg Hollow output shaft Type D Mb 2601 consult us Mb Mb Mb Mb Asynchronous motors, brake and gearboes 3-phase LS LS and C 1 brake Gearboes rame Weight Weight size AC HJ LB LJ kg AC HJ LB LJ kg U PU U PU U PU U PU U PU Additional brake weight. 2. C J01 to J Attention : motor with larger C flange and shaft etension. 4. Attention : motor with smaller C flange and shaft etension. D9.31

32 HJ of Multibloc (Mb) geared motors, MU-T universal mounting, with M 3601 (M B14) motor, Mb 3101, Mb 2201 to Mb BD flange, H L, H or H L solid shaft in millimetres A LB LJ U H P N j6 Ø DB h6 H Ø AC M HU O Z T LA Ø PU 4 S B Gearbo with BD flange Weight kg Type D H HU A M N P LA S T H or H L H L Mb consult us Mb Mb Mb Mb Mb Mb See details of Mb 3101 page D open holes on radius. Solid output shaft Type DB B O Z Mb 2601 consult us Mb M16 36 Mb M12 28 Mb M10 22 Mb M10 22 Mb M C J01 to J Attention : motor with larger C flange and shaft etension. 3. Attention : motor with smaller C flange and shaft etension. 4. for Mb 3101, input flange integrated into the housing, that is + U = 75 Asynchronous motors, brake and gearboes 3-phase LS LS and C 1 brake Gearboes rame Weight Weight size AC HJ LB LJ kg AC HJ LB LJ kg U 4 PU U PU U PU U PU U PU U PU D9.32

33 HJ of Multibloc (Mb) geared motors, MU- (MU) universal mounting, with M 3001 (M B5) motor, Mb 2201 to Mb BD flange, H L, H or H L solid shaft in millimetres LB U A LJ H P N j6 Ø DB h6 H HD Ø AC M HU O Z T LA Ø PU 4 S B Gearbo with BD flange Weight kg Type D H HU A M N P LA S T H or H L H L Mb consult us Mb Mb Mb Mb Solid output shaft Type DB B O Z Mb 2601 consult us Mb M16 36 Mb M12 28 Mb M10 22 Mb M10 22 Asynchronous motors, brake and gearboes 3-phase LS LS and C 1 brake Gearboes rame Weight Weight size AC HJ LB LJ kg AC HJ LB LJ kg U PU U PU U PU U PU U PU Additional brake weight. 2. C J01 to J Attention : motor with larger C flange and shaft etension. 4. Attention : motor with smaller C flange and shaft etension. D9.33

34 and weight of torque arm, Mb 3101 and Mb 2201 to Mb Mb 2201 to 2501 : LD [or D] in millimetres 3 4 CHc screws Ø 1 Ø 2 2 A1 B1 1 G1 Ø C1 - Mb 3101 : LD [or D] 3 4 H screws Ø 1 Ø 2 2 A1 B1 1 Ø C1 G1 torque arm Weight Type 1 A1 B1 C G1 1 2 screw kg Mb H M Mb H M Mb H M Mb H M Mb H M n standard version, the torque arm (fitted with a fleible Silentbloc shock mount) is supplied separately, painted in black. Optionally, the torque arm is supplied mounted on the gearbo : in this case specify or L mounting side and D, or U orientation. D9.34