BODY CONTROL SYSTEM SECTION BCS CONTENTS ELECTRICAL & POWER CONTROL BCS-1 BCM PRECAUTION... 3 PREPARATION... 4 SYSTEM DESCRIPTION...

Transcription

1 TR & WR TR ST S Y TR SYSTM TTS M RUT... 3 RUTS... 3 recaution for Supplemental Restraint System (SRS) "R " and "ST T R-T- SR"...3 RRT... 4 RRT... 4 Special Service Tool...4 SYSTM SRT... 5 MT RTS... 5 Y TR SYSTM...5 Y TR SYSTM : omponent arts ocation...5 WR SUMT TR SYSTM...5 WR SUMT TR SYSTM : omponent arts ocation...6 SYSTM... 7 Y TR SYSTM...7 Y TR SYSTM : System...7 Y TR SYSTM : ail Safe...8 MT SWT R SYSTM...9 MT SWT R SYSTM : System...9 S UR SYSTM...12 S UR SYSTM : System...13 WR SUMT TR SYSTM...13 WR SUMT TR SYSTM : System...13 S M TR SYSTM...15 S M TR SYSTM : System...15 SS SYSTM (M)...16 MM TM...16 MM TM : SUT unction (M - MM TM)...16 R...17 R : SUT unction (M - R )...17 RR R...18 RR R : SUT unction (M - RR R)...18 UZZR...19 UZZR : SUT unction (M - UZZR)...19 T M...19 T M : SUT unction (M - T M)...19 M...20 M : SUT unction (M - M)...20 WR...21 WR : SUT unction (M - WR)...21 SR...22 SR : SUT unction (M - S- R)...22 R TR...23 R TR : SUT unction (M - R TR)...23 TT Y...23 TT Y : SUT unction (M - TT Y)...23 M SW...26 S S-1

2 M SW : SUT unction (M-M SW) M M : SUT unction (M - M) MMU MMU : SUT unction (M - MMU) TTRY SVR TTRY SVR : SUT unction (M - TTRY SVR) TRU TRU : SUT unction (M - TRU) TT M TT M : SUT unction (M - TT M) RT WR RT WR : SUT unction (M - RT WR) S UR S UR : SUT unction (M - S UR) R RSSUR MTR R RSSUR MTR : SUT unction (M - R RSSUR MTR) U SS RMT M (Y TR MU) Reference Value ail Safe T nspection riority hart T ndex WR RM M (Y TR MU) Wiring iagram S ST ST USTMT T SRV W R TR UT (M) T SRV W R TR UT (M) : T SRV W R TR UT (M) : Work rocedure URT (M) URT (M) : URT (M) : Work rocedure URT (M) : onfiguration ist S M RT Work rocedure T/RUT SS U1000 MM RUT T iagnosis rocedure U1010 TR UT () T iagnosis rocedure U0415 V S S T iagnosis rocedure SVT RRR T iagnosis rocedure W VT T iagnosis rocedure RM M US T iagnosis rocedure WR SUY RU RUT iagnosis rocedure Special Repair Requirement MT SWT UT RUT iagnosis rocedure Special Repair Requirement MT SWT UTUT RUT iagnosis rocedure Special Repair Requirement SYMTM SS MT SWT SYSTM SYM- TMS Symptom Table RM RT T RMV STT M (Y TR MU) Removal and nstallation MT SWT xploded View Removal and nstallation S-2

3 < RUT > RUT RUTS RUTS recaution for Supplemental Restraint System (SRS) "R " and "ST T R-TSR" : The Supplemental Restraint System such as R and ST T R-TSR, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collision. nformation necessary to service the system safely is included in the SR and S section of this Service Manual. WR: To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in the event of a collision which would result in air bag inflation, all maintenance must be performed by an authorized SS/T dealer. mproper maintenance, including incorrect removal and installation of the SRS, can lead to personal injury caused by unintentional activation of the system. or removal of Spiral able and ir ag Module, see the SR section. o not use electrical test equipment on any circuit related to the SRS unless instructed to in this Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness connectors. RUTS W US WR TS (R R TR) MMRS WR: When working near the irbag iagnosis Sensor Unit or other irbag System sensors with the gnition or engine running, T use air or electric power tools or strike near the sensor(s) with a hammer. eavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing serious injury. When using air or electric power tools or hammers, always switch the gnition, disconnect the battery and wait at least three minutes before performing any service. S S-3

4 < RRT > RRT RRT Special Service Tool RRT : The actual shape of the tools may differ from those illustrated here. Tool number (TechMate o.) Tool name (-50190) Signal Tech 0131ZZ ctivate and display TMS transmitter s isplay tire pressure reported by the TMS transmitter Read TMS Ts Register TMS transmitter s Test remote keyless entry keyfob relative to signal strength heck ntelligent ey relative signal strength onfirm vehicle ntelligent ey antenna signal strength ompatible with future sensors quipped with a display S-4

5 < SYSTM SRT > SYSTM SRT MT RTS Y TR SYSTM MT RTS Y TR SYSTM : omponent arts ocation : WM1699ZZ S. side of dash (view with instrument panel removed) 1. M WR SUMT TR SYSTM S-5

6 < SYSTM SRT > MT RTS WR SUMT TR SYSTM : omponent arts ocation : M0845ZZ 1. M /R 2. M 3. ombination meter S-6

7 < SYSTM SRT > SYSTM Y TR SYSTM SYSTM Y TR SYSTM : System : UT M (body control module) controls the various electrical components. t inputs the information required to the control from communication and the signal received from each switch and sensor. M has combination switch reading function for reading the operation status of combination switches (light, turn signal, wiper and washer) in addition to a function for controlling the operation of various electrical components. t also has the signal transmission function as the passed point of signal and the power saving control function that reduces the power consumption with the ignition switch. M is equipped with the diagnosis function that performs the diagnosis with SUT and various settings. communication control n communication, control units are connected with 2 communication lines (-, high) allowing a high rate of information transmission with less wiring. ach control unit transmits/receives the data but selectively reads required information only. communication signal Refer to the -32, " MMUT SYSTM : ommunication Signal hart". M UT ST System ombination switch reading system Signal buffer system ower consumption control system Shipping mode control system uto light system Turn signal and hazard warning lamp system eadlamp system ront fog lamp system xterior lamp battery saver system aytime running light system Refer to S-9, "MT SWT R SYSTM : System " S-13, "S UR SYSTM : System " S-13, "WR SUMT TR SYSTM : System " S-15, "S M TR SYSTM : System " X-12, "UT T SYSTM : System " ( type headlamp) X-135, "UT T SYSTM : System " (alogen type headlamp) X-14, "TUR S ZR WR M SYS- TM : System " ( type headlamp) X-137, "TUR S ZR WR M SYS- TM : System " (alogen type headlamp) X-11, "M SYSTM : System " ( type headlamp) X-134, "M SYSTM : System " (alogen type headlamp) X-16, "RT M SYSTM : System " ( type headlamp) X-139, "RT M SYSTM : System " (alogen type headlamp) X-17, "XTRR M TTRY SVR SYSTM : System " ( type headlamp) X-140, "XTRR M TTRY SVR SYSTM : System " (alogen type headlamp) X-13, "YTM RU T SYSTM : System " ( type headlamp) X-136, "YTM RU T SYSTM : System " (alogen type headlamp) S S-7

8 < SYSTM SRT > SYSTM ack-up lamp system arking, license plate, side marker and tail lamp system nterior room lamp control system nterior room lamp battery saver system llumination control system ront wiper and washer system Warning chime system oor lock system Trunk open system issan vehicle immobilizer system Vehicle security system anic alarm Rear window defogger system ntelligent ey system/engine start system ower window system System R (retained accessory power) system TMS (tire pressure monitor system) oor lock function Trunk open function Warning function ey reminder function ngine start function Y TR SYSTM : ail Safe X-16, "-U M SYSTM : System " ( type headlamp) X-139, "-U M SYSTM : System " (alogen type headlamp) X-15, "R, S T, S MRR T M SYSTM : System " ( type headlamp) X-137, "R, S T, S MRR T M SYSTM : System " (alogen type headlamp) -7, "TRR RM M TR SYSTM : System " -7, "TRR RM M TR SYSTM : System " -8, "UMT TR SYSTM : System " WW-9, "RT WR WSR SYSTM : System " WS-5, "WR M SYSTM : System " -19, "System " -34, "System " S-12, "SS V MMZR SYSTM-TS : System " S-14, "V SURTY SYSTM : System " -6, "System " -22, "R UT : System " (door request switch) -21, "TT Y SYSTM : System " (ntelligent ey) -34, "System " (trunk request switch) -21, "TT Y SYSTM : System " (ntelligent ey) -26, "WR UT : System " -29, "Y RMR UT : System " -30, "RMT STRT UT : System " W-8, "System " S-29, "RT WR : SUT unction (M - R- T WR)" WT-9, "System " Refer to : S TR Y T M performs fail-safe control when any T are detected. isplay contents of SUT ail-safe ancellation 2192: SR M-M nhibit engine cranking rase T 2193: M-M nhibit engine cranking rase T 2195: T-S nhibit engine cranking rase T S-8

9 < SYSTM SRT > SYSTM isplay contents of SUT ail-safe ancellation 2560: STRTR T RY nhibit engine cranking 500 ms after the following signal communication status has become consistent Starter control relay signal Starter relay status signal 2562: VT nhibit engine cranking 100 ms after the power supply voltage increases to more than 8.8 V 2608: STRTR RY nhibit engine cranking 260: T RY 260: STT S ST nhibit engine cranking Maintains the power supply position attained at the time of T detection 2617: STRTR RY R nhibit engine cranking 500 ms after the following signal communication status becomes consistent Starter motor relay control signal Starter relay status signal () 500 ms after the following conditions are fulfilled relay (M /R) control signal: (attery voltage) gnition signal ( to M /R): (Request signal) gnition signal ( from M /R): (ondition signal) When any of the following conditions is fulfilled ower position changes to Receives engine status signal () 1 second after the starter motor relay control inside M becomes normal 2618: M nhibit engine cranking 261: STT RV nhibit engine cranking MT SWT R SYSTM 1 second after the ignition relay (M /R) control inside M becomes normal When any of the following conditions are fulfilled ower position changes to Receives engine status signal () MT SWT R SYSTM : System SYSTM RM : S UT M reads the status of the combination switch (light, turn signal, wiper and washer) and recognizes the status of each switch. M has a combination of 5 output terminals (UTUT 1-5) and 5 input terminals (UT 1-5) and reads a maximum of 20 switch states. MT SWT MTRX WM1215 S-9

10 < SYSTM SRT > SYSTM ombination switch circuit WM1216 ombination switch UT-UTUT system list System UT 1 UT 2 UT 3 UT 4 UT 5 UTUT 1 R WSR R WR W TUR TUR R UTUT 2 R WR R WR T SS M 1 UTUT 3 T VUM 1 M 2 M UTUT 4 T VUM 3 UT T T M UTUT 5 T VUM 2 R MT SWT R UT M reads the status of the combination switch at 10ms intervals normally. M0609 T: M reads the status of the combination switch at 60ms intervals when M is controlled at low power consumption mode. M operates as follows and judges the status of the combination switch. - t operates the transistor on UTUT side in the following order: UTUT and outputs voltage waveform. - The voltage waveform of UTUT corresponding to the formed circuit is input into the interface on UT side if any (1 or more) switches are. S-10

11 < SYSTM SRT > SYSTM - t reads this change of the voltage as the status signal of the combination switch. peration xample n the following operation example, the combination of the status signals of the combination switch is replaced as follows: UT 1-5 to 1-5 and UTUT 1-5 to -. xample 1: When a switch (T M) is turned The circuit between UTUT 4 and UT 5 is formed when the T M is turned. MM0326 WM1217 M detects the combination switch status signal 5 when the signal of UTUT 4 is input to UT 5. M judges that the T M switch is when the signal 5 is detected. S xample 2: When some switches (TRU R, T M) are turned S-11

12 < SYSTM SRT > SYSTM The circuits between UTUT 1 and UT 5 and between UTUT 4 and UT 5 are formed when the TUR R switch and T M switch are turned. WM1218 M detects the combination switch status signal 5 when the signals of UTUT 1 and UTUT 4 are input to UT 5. M judges that the TUR R switch and T M switch are when the signal 5 is detected. WR TRMTTT ST STT (RT WR TRMTTT RT) M judges the wiper intermittent dial 1-7 by the status of T VUM 1, 2, and 3 switches. Wiper intermittent dial position ntermittent operation delay interval S UR SYSTM T VUM switch / status T VUM 1 switch T VUM 2 switch T VUM 3 switch 1 2 Short ong 7 S-12

13 < SYSTM SRT > SYSTM S UR SYSTM : System SYSTM RM : UT M has the signal transmission function that outputs/transmits each input/received signal to each unit. Signal transmission function list WR SUMT TR SYSTM WR SUMT TR SYSTM : System SYSTM RM WM1528 Signal name nput gnition switch signal gnition switch signal oor switch signal ngine switch (push switch) ny door switch M /R () ombination meter () M /R () nputs the push-button ignition switch (push switch) signal and transmits the ignition switch status judged with M via communication. nputs the door switch signal and transmits it via communication. : S WM1529 UT M incorporates a power saving control function that reduces the power consumption according to the vehicle status. S-13

14 < SYSTM SRT > SYSTM M switches the status (control mode) by itself with the power saving control function. t performs the sleep request to each unit (M /R and combination meter) that operates with the ignition switch. ormal mode (wake-up) - communication is normally performed with other units - ach control with M is operating properly communication sleep mode ( sleep) - transmission is stopped - ontrol with M only is operating ow power consumption mode (M sleep) - ow power consumption control is active - transmission is stopped W WR SUMT TR WT M M reduces the power consumption with the following operation in the low power consumption mode. The reading interval of the each switches changes from 10 ms interval to 60 ms interval. Sleep mode activation M receives the sleep-ready signal (ready) from M /R and combination meter via communication. M transmits the sleep wake up signal (sleep) to each unit when all of the sleep conditions are fulfilled. ach unit stops the transmission of communication with the sleep wakeup signal. M is in communication sleep mode. M is in the low power consumption mode and perform the low power consumption control when all of the M sleep conditions are fulfilled with sleep condition. Sleep condition sleep condition M sleep condition Receiving the sleep-ready signal (ready) from all units gnition switch: Vehicle security system alarm and panic alarm: o operation Warning lamp: o operation ntelligent ey system buzzer: o operation Trunk room lamp switch status: o change rake switch: Turn signal indicator lamp: o operation xterior lamp: oor lock status: o change SUT communication status: o communication Meter display signal: on-transmission oor switch status: o change Rear window defogger: nterior room lamp battery saver: Time out R system: ower window switch communication: o transmission ush-button ignition switch (push switch) illumination: TS: o operation Remote keyless entry receiver communication status: o communication Tire pressure monitor system: Stop Wake-up operation M changes from the low power consumption mode to the communication sleep mode when any of the M wake-up conditions is fulfilled. ly the control with M is activated. M transmits the sleep wake up signal (wake up) to each unit when any of the wake-up conditions is fulfilled. t changes from the low power consumption mode or the communication sleep mode to the normal mode. ach unit starts the transmission of communication with the sleep wake up signal. n addition, the combination meter transmits the wake up signal to M via communication to report the communication start. S-14

15 < SYSTM SRT > Wake-up condition S M TR SYSTM SYSTM S M TR SYSTM : System SYSTM RM M wake-up condition oor unlock sensor:, ront door lock assembly (key cylinder switch): ock or unlock oor lock switch: oor unlock switch: Trunk lid opener switch: ower window serial link communication: Receiving Remote keyless entry receiver: Receiving valid key fob wake-up condition Receiving the sleep-ready signal (ot-ready) from any units ush-button ignition switch (push switch): azard switch: SS switch:, T M switch: ront door switch :, ront door switch R:, Trunk room lamp switch:, ront door request switch : ront door request switch R: Trunk opener request switch: Stop lamp switch 2 signal: Remote keyless entry receiver: Receiving valid key fob : S WM1760 SRT The M switches the status (shipping mode or normal mode) by itself according to the extended storage switch condition, and transmits the shipping mode status signal to the combination meter and each unit via communication. When the shipping mode function is activated, the control units will not detect Ts. M control functions are limited in shipping mode. Refer to S-81, "". When the M is in shipping mode, a message may be shown in the combination meter or display. or shipping mode cancel operation refer to S-66, "Work rocedure". S-15

16 < SYSTM SRT > SS SYSTM (M) MM TM SS SYSTM (M) MM TM : SUT unction (M - MM TM) : T TM SUT performs the following functions via communication with M. irect iagnostic Mode U dentification Self iagnostic Result ata Monitor ctive Test Work support onfiguration iag Support Mntr SYSTM T M can perform the following functions: The M part number is displayed. The M self diagnostic results are displayed. The M input/output data is displayed in real time. The M activates outputs to test components. The settings for M functions can be changed. The vehicle specification can be read and saved. The vehicle specification can be written when replacing M. The result of transmit/receive diagnosis of communication is displayed. irect iagnostic Mode System Sub System U dentification Self iagnostic Result ata Monitor ctive Test Work support onfiguration iag Support Mntr oor lock R Rear window defogger RR R Warning chime UZZR nterior room lamp timer T M xterior lamp M Wiper and washer WR Turn signal and hazard warning lamps SR ir conditioner R TR ntelligent ey system TT Y ombination switch M SW M M mmobilizer MMU nterior room lamp battery saver TTRY SVR Trunk TRU Vehicle security system TT M R system RT WR Signal buffer system S UR TMS R RSSUR MTR RZ RM T () S-16

17 < SYSTM SRT > SS SYSTM (M) The M records the following vehicle condition at the time a particular T is detected, and displays it on SUT. SUT screen item ndication/unit Vehicle Speed km/h Vehicle speed at the moment a particular T is detected do/trip Meter km Total mileage (dometer value) at the moment a particular T is detected S> While turning M status from low power consumption mode to normal mode (ower supply position is *). S> While turning M status from low power consumption mode to normal mode (ower supply position is.) > While turning power supply position from *to > While turning power supply position from to RU> While turning power supply position from RU to (Vehicle is stopped and selector lever is in position.) R>RU RU>URT While turning power supply position from R to RU (rom cranking up the engine to run it) While turning power supply position from RU to (mergency stop operation) Vehicle ondition > > > >R ower position status at the moment a particular T is detected* While turning power supply position from to While turning power supply position from to * While turning power supply position from to While turning power supply position from to R >S While turning M status from normal mode (ower supply position is.) to low power consumption mode >S While turning M status from normal mode (ower supply position is *.) to low power consumption mode ower supply position is (gnition switch )* ower supply position is (gnition switch ) ower supply position is (gnition switch ) ower supply position is (gnition switch with engine stopped) RU R ower supply position is RU (gnition switch with engine running) ower supply position is R (t engine cranking) ounter 0-39 The number of times that ignition switch is turned after T is detected The number is 0 when a malfunction is detected now. The number increases like after returning to the normal condition whenever ignition is switched. The number is fixed to 39 until the self-diagnosis results are erased if it is over 39. S T: *: ower supply position shifts to from, when ignition switch is in the position, selector lever is in the position, and any of the following conditions are met: losing door pening door oor is locked using door request switch oor is locked using ntelligent ey The power supply position shifts to when the push-button ignition switch (push switch) is pushed at. R R : SUT unction (M - R ) : S ST RSUT Refer to S-53, "T ndex". S-17

18 < SYSTM SRT > T MTR Monitor tem [Unit] RQ SW-R [/] RQ SW-S [/] RQ SW-/TR [/] R SW-R [/] R SW-S [/] R SW-RR [/] R SW-R [/] R SW- [/] SW [/] U SW [/] Y Y -SW [/] Y Y U-SW [/] TV TST SS SYSTM (M) ndicates condition of door request switch ndicates condition of door request switch R ndicates condition of trunk opener request switch ndicates condition of front door switch ndicates condition of front door switch R ndicates condition of rear door switch R ndicates condition of rear door switch ndicates condition of trunk switch ndicates condition of lock signal from door lock and unlock switch ndicates condition of unlock signal from door lock and unlock switch ndicates condition of lock signal from door key cylinder switch ndicates condition of unlock signal from door key cylinder switch R Test tem WR SURT This test is able to check door lock operation [TR U/S U/R U/ U/ ]. * : nitial setting RR R RR R : SUT unction (M - RR R) T MTR Support tem Setting R -U ST UT U TY UT UT UT U UT STUR T STT * utomatic door locks function. utomatic door locks function. M2 river door only unlocks automatically. M1* ll doors unlock automatically. M3 This mode is not used. M2 oors lock automatically when shifted out of (park). M1* oors lock automatically when vehicle speed reaches 24 km/h (15 mph). M3 This mode is not used. M2 oors unlock automatically when shifted into (park). M1* oors unlock automatically when ignition is switched from to. * Signature light setting. Signature light setting. : Monitor tem [Unit] US SW [/] RR SW [/] ndicates condition of push button ignition switch ndicates condition of rear window defogger switch S-18

19 < SYSTM SRT > TV TST Test tem SS SYSTM (M) RR R WR SURT This test is able to check rear window defogger operation [/]. ST R- TMR * : nitial setting UZZR UZZR : SUT unction (M - UZZR) T MTR Support tem Setting M3 M2 M1* Rear defogger turns after 1 minute. Rear defogger remains until turned. Rear defogger turns after 15 minutes. : Monitor tem [Unit] US -SW [/] U S -R [/] V S 1 [km/h] T M SW [/] R SW [/] R SW-R [/] SW [/] TV TST ndicates condition of push button ignition switch. ndicates condition of door unlock sensor. ndicates vehicle speed signal received from S on communication line. ndicates condition of combination switch. ndicates condition of front fog lamp switch. ndicates condition of front door switch. ndicates condition of lock signal from door lock and unlock switch. Test tem ST T WR TST This test is able to check seat belt warning chime operation [/]. T WR M This test is able to check light warning chime operation [/]. RVRS WR This test is able to check reverse warning chime operation [/]. T M T M : SUT unction (M - T M) T MTR : S Monitor tem [Unit] RQ SW -R [/] RQ SW -S [/] US -SW [/] U S -R [/] R SW-R [/] R SW-S [/] R SW-RR [/] R SW-R [/] R SW- [/] SW [/] ndicates condition of door request switch ndicates condition of door request switch R ndicates condition of push button ignition switch ndicates condition of door unlock sensor ndicates condition of front door switch ndicates condition of front door switch R ndicates condition of rear door switch R ndicates condition of rear door switch ndicates condition of trunk switch ndicates condition of lock signal from door lock and unlock switch S-19

20 < SYSTM SRT > Monitor tem [Unit] U SW [/] Y Y -SW [/] Y Y U-SW [/] TR/T MTR [/] R- [/] R-U [/] TV TST SS SYSTM (M) ndicates condition of unlock signal from door lock and unlock switch ndicates condition of lock signal from door key cylinder switch ndicates condition of unlock signal from door key cylinder switch ndicates condition of trunk room lamp switch ndicates condition of lock signal from ntelligent ey ndicates condition of unlock signal from ntelligent ey T M ST M TST R M TST WR SURT T: The items listed below are the only applicable Work Support items for this vehicle. f other items are displayed on SUT, do not use or change the setting for these other items. * : nitial setting M M : SUT unction (M - M) T MTR Test tem This test is able to check interior room lamp operation [/]. This test is able to check step lamp operation [/]. This test is able to check cargo lamp operation [/]. Support tem Setting SR T STT ST / -U T M VRR * * * T: o not use this function since interior room lamp control is changed. nterior room lamp timer function. nterior room lamp timer function. og lamp override function. og lamp override function. : Monitor tem [Unit] US SW [/] STT [Stop/Stall/rank/Run] V S 1 [km/h] TUR S R [/] TUR S [/] T M SW [/] M SW [/] M SW 1 [/] M SW 2 [/] SS SW [/] UT T SW [/] R SW [/] R SW-R [/] R SW-S [/] ndicates condition of push button ignition switch ndicates engine status received from M on communication line ndicates vehicle speed signal received from S on communication line ndicates condition of combination switch ndicates condition of front door switch ndicates condition of front door switch R S-20

21 < SYSTM SRT > SS SYSTM (M) Monitor tem [Unit] R SW-RR [/] R SW-R [/] R SW- [/] T S (TT) [V] T S (T) [V] T SSR [/] TV TST Test tem R M YTM RU T M S WR SURT ndicates condition of rear door switch R ndicates condition of rear door switch ndicates condition of trunk switch ndicates voltage signal from optical sensor ndicates voltage signal from optical sensor ndicates condition of optical sensor This test is able to check front fog lamp operation [/]. This test is able to check daytime running light operation [/R/]. This test is able to check head lamp illumination dimming operation [/]. TWT WR * : nitial setting WR Support tem Setting USTM /T STT Y ST M2* M1 M4 M3* M2 M1 M4 M3 M2 M1* M 8 M 7 M 6 M 4 M 5 M 3 M 2 M 1* WR : SUT unction (M - WR) uto lamp function. uto lamp function. This mode is not used. Wiper link function operates in T, W and. Wiper link function operates in W and. Wiper link function. ess sensitive than normal setting (turns later). More sensitive than M2. More sensitive than normal setting (turns earlier). ormal setting. uto lamp delay timer. : S T MTR Monitor tem [Unit] US SW [/] V S 1 [km/h] ndicates condition of push button ignition switch ndicates vehicle speed signal received from S on communication line S-21

22 < SYSTM SRT > SS SYSTM (M) Monitor tem [Unit] R WR [/] R WR W [/] R WSR SW [/] R WR T [/] R WR ST [/] T VUM [1 7] R SSR [/] TV TST Test tem R WR WR SURT ndicates condition of wiper operation of combination switch ndicates front wiper auto stop signal received from M /R on communication line ndicates condition of intermittent wiper operation of combination switch ndicates condition of rain sensor. This test is able to check front wiper operation [T/o/i/]. Support tem Setting R SSR * Rain sensor function. Rain sensor function WR S STT * Wiper speed setting function. Wiper speed setting function. * : nitial setting SR SR : SUT unction (M - SR) : T MTR Monitor tem [Unit] RQ SW -R [/] RQ SW -S [/] US SW [/] TUR S R [/] TUR S [/] ZR SW [/] R- [/] R-U [/] R- [/] TV TST Test tem SR WR SURT ndicates condition of door request switch ndicates condition of door request switch R ndicates condition of push button ignition switch ndicates condition of turn signal function of combination switch ndicates condition of hazard switch ndicates condition of lock signal from ntelligent ey ndicates condition of unlock signal from ntelligent ey ndicates condition of panic alarm signal from ntelligent ey This test is able to check turn signal lamp operation [//R]. Support item Setting 3-TM SR STT * 3-Time flasher setting. 3-Time flasher setting. * : nitial setting S-22

23 < SYSTM SRT > SS SYSTM (M) R TR R TR : SUT unction (M - R TR) T MTR Monitor tem [Unit] S [/] ndicates condition of fan switch. R SW [/] ndicates condition of / switch. TRM M [/] ndicates condition of thermo amp. TT Y TT Y : SUT unction (M - TT Y) T MTR : : Monitor tem [Unit] Main RQ SW -R [/] ndicates condition of door request switch RQ SW -S [/] ndicates condition of door request switch R RQ SW -/TR [/] ndicates condition of trunk opener request switch US SW [/] ST S WR SY [/] ndicates condition of push button ignition switch ndicates condition of shiftlock solenoid power supply R SW 1 [/] ndicates condition of brake switch R SW 2 [/] ndicates condition of brake switch T/ SW [/] ndicates condition of position ST / SW [/] ndicates condition of or position U S -R [/] ndicates condition of door unlock sensor US SW -M [/] RY1 -/ [/] T SW -M [/] ST -M [/] ST -MT [/] ST -MT [/] ndicates condition of push button ignition switch received from M /R on communication line ndicates condition of ignition relay 1 received from M /R on communication line ndicates condition of detent switch received from TM on communication line ndicates condition of or position from TM on communication line ndicates condition of position from TM on communication line ndicates condition of position from M /R on communication line STT [Stop/Start/rank/Run] ndicates condition of engine state from M on communication line V S 1 [mph/km/h] V S 2 [mph/km/h] ndicates condition of vehicle speed signal received from S on communication line ndicates condition of vehicle speed signal received from combination meter on communication line R STT -R [/RY/U] ndicates condition of driver side door status. R STT -S [/RY/U] ndicates condition of passenger side door status. R STT -RR [/RY/U] ndicates condition of rear right side door status. R STT -R [/RY/U] ndicates condition of rear left side door status. [Set/Reset] RMT STRT [Set/Reset] -Y [Set/Reset] ndicates condition of intelligent key ndicates condition of engine start possibility from intelligent key ndicates condition of ntelligent ey. S S-23

24 < SYSTM SRT > SS SYSTM (M) UTT TMR [under a stop] TTRY SVR [under a stop] R RT TMR [/] UT R TMR [/] R TM [sec] SRT R ST RY -RQ RY 1 -RQ RY 2 -RQ T SW WR [/] RY 3 -RQ RY -RQ RT STRT [Set/Reset] RMT R STRT [Set/Reset] TR/T MTR [/] R- [/] R-U [/] R-TR/ [/] R- [/] R-M [/] R TV TST Monitor tem [Unit] Main R U1 [0-19] R U2 [0-19] ndicates condition of ntelligent ey authentication. ndicates condition of battery saver. ndicates condition of crank prohibit timer. ndicates condition of automatic engine crank timer from ntelligent ey. ndicates condition of engine cranking time from ntelligent ey. ndicates condition of condition of short crank from intelligent key ndicates condition of starter relay. ndicates condition of ignition 1 relay. ndicates condition of ignition 2 relay. ndicates condition of park position switch voltage. ndicates condition of ignition 3 relay. ndicates condition of relay. ndicates condition of engine start possibility. ndicates condition of engine start possibility from ntelligent ey. ndicates condition of trunk lid. ndicates condition of lock signal from ntelligent ey. ndicates condition of unlock signal from ntelligent ey. ndicates condition of trunk open signal from ntelligent ey. ndicates condition of panic signal from ntelligent ey. ndicates condition of mode change signal from ntelligent ey. ndicates condition of trunk signal from ntelligent ey. When remote keyless entry receiver receives the signal transmitted while operating on ntelligent ey, the numerical value start changing. When remote keyless entry receiver receives the signal transmitted while operating on ntelligent ey, the numerical value start changing. Test tem TT Y () T M SR R TTRY SVR TRU/ R UTS UZZR S UZZR TR T2 SW UM US SWT TR T T1 ST T W This test is able to check ntelligent ey identification number [/ o1/ o2/ o3/ o4/ o5]. This test is able to check interior room lamp operation [/]. This test is able to check hazard lamp operation [/R/]. This test is able to check horn operation []. This test is able to check battery saver operation [/]. This test is able to check trunk actuator operation [pen]. This test is able to check ntelligent ey warning buzzer operation [/]. This test is able to check combination meter warning chime operation [Take ut/nob/ey/ ]. This test is able to check combination meter warning lamp operation [Y /Y /]. This test is able to check ignition relay-2 control operation [/]. This test is able to check push-button ignition switch STRT indicator operation [/]. This test is able to check push-button ignition switch indicator operation [/]. This test is able to check accessory relay control operation [/]. This test is able to check ignition relay-1 control operation [/]. This test is able to check starter control relay operation [/]. S-24

25 < SYSTM SRT > SS SYSTM (M) Test tem T RY RVRS M TST R M TST R ST M TST S ST M TST ST ST M TST TRU/U M TST Y W TST ST S TST WR SURT This test is able to check ignition relay operation [/]. This test is able to check reverse lamp illumination operation [/]. This test is able to check door handle lamp illumination operation [/]. This test is able to check driver seat lamp operation [/]. This test is able to check passenger seat lamp operation [/]. This test is able to check shift spot lamp operation [/]. This test is able to check cargo lamp illumination operation [/]. This test is able to check power window operation using the ntelligent ey [/W up/down /Send /W down /Send /W up ]. This test is able to check shift lock solenoid operation [/]. Support tem Setting / TTRY SVR RMT STRTR SWR -Y U SWR YSS U- SWR RTRT MRRR ST /U Y -Y STRT Y -Y TRU/SS T * * UZZR* R V * * * * * * attery saver function. attery saver function. Remote engine start function. Remote engine start function. uzzer reminder function by door lock/unlock request switch. orn chirp reminder function by door lock request switch. o reminder function by door lock/unlock request switch. This mode is not used. uzzer or horn chirp reminder when doors are locked/unlocked with ntelligent ey. o buzzer or horn chirp reminder when doors are locked/unlocked with ntelligent ey. orn chirp reminder when doors are locked with ntelligent ey. o horn chirp reminder when doors are locked with ntelligent ey. Retractable mirror set. Retractable mirror set. oor lock/unlock function from ntelligent ey. oor lock/unlock function from ntelligent ey. ngine start function from ntelligent ey. ngine start function from ntelligent ey. uzzer reminder function by trunk request switch. uzzer reminder function by trunk request switch. RM Y ntelligent ey code can be checked. 70 msec Start 100 msec Starter motor operation duration times. SRT R UTUT 200 msec nd S T SS This function allows inside key antenna self-diagnosis. S S-25

26 < SYSTM SRT > SS SYSTM (M) Support tem Setting M7 5 min M6 4 min M5 3 min UT ST M4 2 min uto door lock time can be set in this mode. M3* 1 min M2 30 sec M1 *: nitial Setting M SW M SW : SUT unction (M-M SW) : T MTR Monitor tem [Unit] R WR [/] R WR W [/] R WSR SW [/] ndicates condition of wiper operation of combination switch R WR T [/] T VUM [1-7] TUR S R [/] TUR S [/] T M SW [/] M SW [/] M SW 1 [/] M SW 2 [/] SS SW [/] UT T SW [/] R SW [/] M ndicates condition of intermittent wiper operation of combination switch ndicates condition of right turn signal operation of combination switch ndicates condition of left turn signal operation of combination switch ndicates condition of tail lamp switch operation of combination switch ndicates condition of i beam switch operation of combination switch ndicates condition of head lamp switch 1 operation of combination switch ndicates condition of head lamp switch 2 operation of combination switch ndicates condition of passing switch operation of combination switch ndicates condition of auto light switch operation of combination switch ndicates condition of front fog lamp switch operation of combination switch M : SUT unction (M - M) : U TT The M part number is displayed. S ST RSUT Refer to S-53, "T ndex". WR SURT Support tem Setting RST STT VU Reset ancel Returns M to initial value in factory shipment. ancels the reset function. URT Refer to S-64, "URT (M) : ". SURT MTR Refer to -14, " iagnostic Support Monitor". MMU S-26

27 < SYSTM SRT > SS SYSTM (M) MMU : SUT unction (M - MMU) S ST RSUT Refer to S-53, "T ndex". T MTR : Monitor tem [Unit] RM [Yet/] RM 4 [Yet/] RM 3 [Yet/] RM 2 [Yet/] RM 1 [Yet/] T RSTR T 4 [Yet/] T 3 [Yet/] T 2 [Yet/] T 1 [Yet/] US SW [/] TU [Yet/] TV TST Switches to when a registered ntelligent ey is inserted into the key slot. ndicates [ ] when key that is registered is received or is not yet received. ndicates { ] when key that is not registered is received. indicates the number of ntelligent ey which has been registered. ndicates condition of push button ignition switch ndicates condition of telematics control unit Test tem TT This test is able to check security indicator operation [/]. TTRY SVR TTRY SVR : SUT unction (M - TTRY SVR) T MTR : Monitor tem [Unit] RQ SW -R [/] RQ SW -S [/] US SW [/] U S -R [/] R SW-R [/] R SW-S [/] R SW-RR [/] R SW-R [/] R SW- [/] SW [/] U SW [/] Y Y -SW [/] Y Y U-SW [/] TR/T MTR [/] R- [/] R-U [/] ndicates condition of door request switch ndicates condition of door request switch R ndicates condition push button ignition switch ndicates condition of door unlock sensor ndicates condition of front door switch ndicates condition of front door switch R ndicates condition of rear door switch R ndicates condition of rear door switch ndicates condition of trunk switch ndicates condition of lock signal from door lock and unlock switch ndicates condition of unlock signal from door lock and unlock switch ndicates condition of lock signal from door key cylinder switch ndicates condition of unlock signal from door key cylinder switch ndicates condition of trunk room lamp switch ndicates condition of lock signal from ntelligent ey ndicates condition of unlock signal from ntelligent ey S S-27

28 < SYSTM SRT > TV TST SS SYSTM (M) Test item TTRY SVR This test is able to check battery saver operation [/]. TRU TRU : SUT unction (M - TRU) : T MTR Monitor tem [Unit] US SW [/] ndicates condition of push button ignition switch U S -R [/] ndicates condition of door unlock sensor V S 1 [km/h] ndicates vehicle speed signal received from S on communication line TR SW [/] ndicates condition of trunk lid opener cancel switch TR/ SW [/] ndicates condition of trunk lid opener switch TR/T MTR [/] ndicates condition of trunk room lamp switch R-TR/ [/] ndicates condition of trunk open signal from ntelligent ey TT M TT M : SUT unction (M - TT M) : T MTR Monitored tem RQ SW -R [/] RQ SW -S [/] RQ SW -/TR [/] US SW [/] U S -R [/] R SW-R [/] R SW-S [/] R SW-RR [/] R SW-R [/] R SW- [/] SW [/] U SW [/] Y Y -SW [/] Y Y U-SW [/] TR/ SW [/] TR/T MTR [/] R- [/] R-U [/] R-TR/ [/] TV TST ndicates condition of door request switch ndicates condition of door request switch R ndicates condition of trunk opener request switch ndicates condition of push button ignition switch ndicates condition of door unlock sensor ndicates condition of front door switch ndicates condition of front door switch R ndicates condition of rear door switch R ndicates condition of rear door switch ndicates condition of trunk switch ndicates condition of lock signal from door lock and unlock switch ndicates condition of unlock signal from door lock and unlock switch ndicates condition of lock signal from door key cylinder switch ndicates condition of unlock signal from door key cylinder switch ndicates condition of trunk lid opener switch ndicates condition of trunk room lamp switch ndicates condition of lock signal from ntelligent ey ndicates condition of unlock signal from ntelligent ey ndicates condition of trunk open signal from ntelligent ey S-28

29 < SYSTM SRT > SS SYSTM (M) Test tem TT V SURTY R M() SR WR SURT This test is able to check security indicator lamp operation [/]. This test is able to check vehicle security horn operation []. This test is able to check vehicle security lamp operation []. This test is able to check turn signal lamp operation [//R]. Support tem Setting SURTY RM ST Security alarm Security alarm RT WR RT WR : SUT unction (M - RT WR) T MTR : Monitor tem [Unit] R SW-R [/] R SW-S [/] S UR ndicates condition of front door switch ndicates condition of front door switch R S UR : SUT unction (M - S UR) T MTR : Monitor tem [Unit] US SW [/] TV TST Test tem ndicates condition of the push button ignition switch RSSUR SW R SWT R RSSUR MTR This test is able to check the oil pressure warning lamp operation [/]. This test is able to check the brake switch operation [/]. R RSSUR MTR : SUT unction (M - R RSSUR M- TR) : T: The Signal Tech Tool [ (-50190)] can be used to perform the following functions. Refer to the Signal Tech User uide for additional information. ctivate and display TMS transmitter s isplay tire pressure reported by the TMS transmitter Read TMS Ts Register TMS transmitter s S ST RSUT T: efore performing Self iagnostic Result, be sure to register the, or else the actual malfunction may be different from that displayed on SUT. Refer to S-53, "T ndex". T MTR S S-29

30 < SYSTM SRT > SS SYSTM (M) R RSS R RSS R R RSS RR R RSS R RST 1 RST R1 RST RR1 RST R1 WR M UZZR TV TST Monitor tem ondition Specification rive vehicle for a few minutes. or gnition switch and activation tool is transmitting activation signals. gnition switch gnition switch gnition switch Tire pressure (ka, kg/cm 2 or si) Registration : reen o registration: Red ow tire pressure warning lamp on: ow tire pressure warning lamp off: uzzer in combination meter on: uzzer in combination meter off: SR R Test tem This test is able to check turn signal lamp operation [//R]. This test is able to check horn operation []. S-30

31 M (Y TR MU) < U SS RMT > U SS RMT M (Y TR MU) Reference Value : T: The Signal Tech Tool [ (-50190)] can be used to perform the following functions. Refer to the Signal Tech User uide for additional information. ctivate and display TMS transmitter s isplay tire pressure reported by the TMS transmitter Read TMS Ts Register TMS transmitter s heck ntelligent ey relative signal strength onfirm vehicle ntelligent ey antenna signal strength VUS T SS T Monitor tem ondition Value/Status TTRY SVR When battery saver is Under a stop RY -RQ R SW When M is not requesting accessory relay activation. When M is requesting accessory relay activation. / switch / switch R RSS ront left tire air pressure value ka, kg/cm 2, psi R RSS R ront right tire air pressure value ka, kg/cm 2, psi R RSS R Rear left tire air pressure value ka, kg/cm 2, psi R RSS RR Rear right tire air pressure value ka, kg/cm 2, psi S ST M TST UT R TMR UT T SW R SW 1 R SW 2 UZZR SW U SW RM RM 4 assenger seat lamp assenger seat lamp When the remote engine start timer is. When the remote engine start timer is. ighting switch ighting switch UT When the brake pedal is released When the brake pedal is depressed rake pedal released rake pedal depressed uzzer in combination meter uzzer in combination meter oor lock/unlock switch does not operate ress door lock/unlock switch to the side oor lock/unlock switch does not operate ress door lock/unlock switch to the U side The key does not match any key registered to M. The key matches any key registered to M. The key does not match the fourth key registered to M. The key matches the fourth key registered to M. Yet Yet S S-31

32 M (Y TR MU) < U SS RMT > Monitor tem ondition Value/Status RM 3 The key does not match the third key registered to M. Yet The key matches the third key registered to M. RM 2 The key does not match the second key registered to M. Yet The key matches the second key registered to M. RM 1 The key does not match the first key registered to M. Yet The key matches the first key registered to M. R TM ngine start timer duration. sec R RT TM ngine start prohibit timer duration. sec R RT TMR When the engine start prohibit timer is. When the engine start prohibit timer is. T SW -M When selector lever is in position When selector lever is in any position other than T SW WR When M is not supplying power to park position switch. When M is supplying power to park position switch. T/ SW When selector lever is in position When selector lever is in any position other than assenger door status R STT-S assenger door U status U Wait with selective U operation (5 seconds) RY river door status R STT-R river door U status U Wait with selective U operation (5 seconds) RY Rear left door status R STT-R Rear left door U status U Wait with selective U operation (5 seconds) RY Rear right door status R STT-RR Rear right door U status U Wait with selective U operation (5 seconds) RY R SW-S ront door R closed ront door R opened R SW- Trunk closed Trunk opened R SW-R ront door closed ront door opened R SW-R Rear door closed Rear door opened R SW-RR Rear door R closed Rear door R opened R ST M TST river seat lamp river seat lamp ngine stopped Stop STT While the engine stalls Stall t engine cranking rank ngine running Run S-32

33 M (Y TR MU) < U SS RMT > S R SW R WSR SW R WR W R WR R WR T R WR ST ZR SW M SW 1 M SW 2 M SW UTT TMR Monitor tem ondition Value/Status RST 1 RST R1 RST R1 RST RR1 RY1 / RY 1 -RQ RY 2 -RQ RY 3--RQ lower motor fan switch lower motor fan switch ront fog lamp switch ront fog lamp switch ront washer switch ront washer switch ront wiper switch ront wiper switch ront wiper switch ront wiper switch ront wiper switch ront wiper switch T ny position other than front wiper stop position ront wiper stop position When hazard switch is not pressed When hazard switch is pressed eadlamp switch eadlamp switch 1st eadlamp switch eadlamp switch 1st igh beam switch igh beam switch When -ey authentication is. gnition switch or gnition switch registration of front left tire incomplete registration of front left tire complete registration of front right tire incomplete registration of front right tire complete registration of rear left tire incomplete registration of rear left tire complete registration of rear right tire incomplete registration of rear right tire complete gnition switch or gnition switch gnition switch or gnition switch gnition switch or gnition switch gnition switch or gnition switch T VUM Wiper intermittent dial is in dial position Y -ey -ey S-33 Under a stop Reset Set YT YT YT YT ey ey S

34 M (Y TR MU) < U SS RMT > Y Y -SW Y Y U-SW T RSTR T S (TT) T S (T) T SSR SS SW RT STRT RMT STRT RMT R STRT US SW US SW-M R SSR RR SW RQ SW-S RQ SW-/TR RQ SW-R RQ SW -R RQ SW -RR R- Monitor tem ondition Value/Status R-M oor key cylinder position oor key cylinder other than position oor key cylinder U position oor key cylinder other than U position M detects registered ntelligent ey, or M does not detect ntelligent ey M detects non-registration ntelligent ey right outside the vehicle ark outside the vehicle right outside the vehicle ark outside the vehicle ptical sensor ptical sensor ther than lighting switch SS ighting switch SS When the engine start is prohibited When the engine start is permitted When the engine start is prohibited When the engine start is permitted When the engine start is prohibited When the engine start is permitted Return ignition switch to position ress ignition switch When engine switch (push switch) is not pressed When engine switch (push switch) is pressed Rain sensor Rain sensor Rear window defogger switch Rear window defogger switch When passenger door request switch is not pressed When passenger door request switch is pressed When trunk request switch is not pressed When trunk request switch is pressed When driver door request switch is not pressed When driver door request switch is pressed When rear door request switch is not pressed When rear door request switch is pressed When rear door request switch R is not pressed When rear door request switch R is pressed When button of ntelligent ey is not pressed When button of ntelligent ey is pressed When /U button of ntelligent ey is not pressed and held simultaneously When /U button of ntelligent ey is pressed and held simultaneously lose to 5V lose to lose to 5V lose to Reset Set Reset Set Reset Set S-34

35 M (Y TR MU) < U SS RMT > R U1 peration frequency of ntelligent ey 0-19 R U2 peration frequency of ntelligent ey 0-19 R- R R-TR/ R-U ST -MT ST -MT ST -M ST / SW ST S WR SY ST ST M TST When button of ntelligent ey is not pressed When button of ntelligent ey is pressed When TRU button of ntelligent ey is not pressed When TRU button of ntelligent ey is pressed When TRU button of ntelligent ey is not pressed When TRU button of ntelligent ey is pressed When U button of ntelligent ey is not pressed When U button of ntelligent ey is pressed When selector lever is in any position other than When selector lever is in position When selector lever is in any position other than When selector lever is in position When selector lever is in any position other than or When selector lever is in or position When selector lever is in any position other than or When selector lever is in or position When M is not supplying power to shift lock. When M is supplying power to shift lock. Shift spot lamp Shift spot lamp SRT R ngine start short crank signal from intelligent key ST RY -RQ T M SW TRM M TU T 4 T 3 T 2 T 1 Monitor tem ondition Value/Status TR/T MTR TR/ SW gnition switch or gnition switch ther than lighting switch 1ST and 2 ighting switch 1ST or 2 Thermo amp is Thermo amp is The of the TU is not registered to M The of the TU is registered to M The of fourth key is not registered to M The of fourth key is registered to M The of third key is not registered to M The of third key is registered to M The of second key is not registered to M The of second key is registered to M The of first key is not registered to M The of first key is registered to M Trunk closed Trunk opened Trunk opener switch While the trunk opener switch is turned Yet Yet Yet Yet Yet S S-35