BODY CONTROL SYSTEM SECTION BCS CONTENTS ELECTRICAL & POWER CONTROL BCS-1 WITH INTELLIGENT KEY SYSTEM PRECAUTION... 5 SYSTEM DESCRIPTION...

Transcription

1 TR & POWR ONTRO STON S OY ONTRO SYSTM ONTNTS WT NTNT Y SYSTM PRUTON... 5 PRUTONS... 5 Precaution for Supplemental Restraint System (SRS) "R " and "ST T PR-TN- SONR"...5 SYSTM SRPTON... 6 OMPONNT PRTS... 6 OY ONTRO SYSTM...6 OY ONTRO SYSTM : omponent Parts ocation...6 POWR ONSUMPTON ONTRO SYSTM...6 POWR ONSUMPTON ONTRO SYSTM : omponent Parts ocation...6 SYSTM... 7 OY ONTRO SYSTM...7 OY ONTRO SYSTM : System...7 OY ONTRO SYSTM : ail-safe...8 OMNTON SWT RN SYSTM...9 OMNTON SWT RN SYSTM : System iagram...9 OMNTON SWT RN SYSTM : System...9 SN UR SYSTM...12 SN UR SYSTM : System iagram...12 SN UR SYSTM : System...12 POWR ONSUMPTON ONTRO SYSTM...13 POWR ONSUMPTON ONTRO SYSTM : System iagram...13 POWR ONSUMPTON ONTRO SYSTM : System...13 NOSS SYSTM (M)...16 OMMON TM...16 OMMON TM : ONSUT unction (M - OMMON TM)...16 OOR O...17 OOR O : ONSUT unction (M - OOR O)...17 RR WNOW OR...18 RR WNOW OR : ONSUT unction (M - RR OR)...19 UZZR...19 UZZR : ONSUT unction (M - UZZR)...19 NT MP...19 NT MP : ONSUT unction (M - NT MP)...20 MP...21 MP : ONSUT unction (M - MP)...21 WPR...24 WPR : ONSUT unction - WPR...24 SR...25 SR : ONSUT unction (M - S- R)...25 R ONTONR...26 R ONTONR : ONSUT unction (M - R ONTONR) (utomatic /)...26 NTNT Y...26 NTNT Y : ONSUT unction (M - NTNT Y)...26 OM SW...29 OM SW : ONSUT unction (M - OM SW)...29 M...29 M : ONSUT unction (M - M)...29 S N O P S-1

2 MMU MMU : ONSUT unction (M - MMU) TTRY SVR TTRY SVR : ONSUT unction (M - TTRY SVR) TRUN TRUN : ONSUT unction (M - TRUN) TT M TT M : ONSUT unction (M - TT) RTN PWR RTN PWR : ONSUT unction (M - R- TN PWR) SN UR SN UR : ONSUT unction (M - SN UR) R PRSSUR MONTOR R PRSSUR MONTOR : ONSUT unction (M - R PRSSUR MONTOR) U NOSS NORMTON M Reference Value ail-safe T nspection Priority hart T ndex WRN RM M Wiring iagram S NSPTON TON SRV WN RPN ONTRO UNT Work Procedure ONURTON (M) Work Procedure onfiguration list TRNST MO N OPRTON Work Procedure T/RUT NOSS U1000 N OMM T ogic iagnosis Procedure U1010 ONTRO UNT (N) T ogic iagnosis Procedure U0415 V SP T ogic iagnosis Procedure OW VOT T ogic iagnosis Procedure POWR SUPPY N ROUN RUT iagnosis Procedure OMNTON SWT OUTPUT RUT iagnosis Procedure OMNTON SWT NPUT RUT iagnosis Procedure SYMPTOM NOSS OMNTON SWT SYSTM SYMP- TOMS Symptom Table NORM OPRTN ONTON RMOV N NSTTON M Removal and nstallation OMNTON SWT xploded View Removal and nstallation WTOUT NTNT Y SYSTM PRUTON PRUTONS Precaution for Supplemental Restraint System (SRS) "R " and "ST T PR-TN- SONR" SYSTM SRPTON OMPONNT PRTS OY ONTRO SYSTM OY ONTRO SYSTM : omponent Parts ocation POWR ONSUMPTON ONTRO SYSTM POWR ONSUMPTON ONTRO SYSTM : omponent Parts ocation SYSTM OY ONTRO SYSTM OY ONTRO SYSTM : System S-2

3 OY ONTRO SYSTM : ail-safe...85 OMNTON SWT RN SYSTM...85 OMNTON SWT RN SYSTM : System iagram...85 OMNTON SWT RN SYSTM : System...86 SN UR SYSTM...89 SN UR SYSTM : System iagram...89 SN UR SYSTM : System...89 POWR ONSUMPTON ONTRO SYSTM...89 POWR ONSUMPTON ONTRO SYSTM : System iagram...90 POWR ONSUMPTON ONTRO SYSTM : System...90 NOSS SYSTM (M)...92 OMMON TM...92 OMMON TM : ONSUT unction (M - OMMON TM)...92 OOR O...92 OOR O : ONSUT unction (M - OOR O)...92 RR WNOW OR...94 RR WNOW OR : ONSUT unction (M - RR OR)...94 UZZR...94 UZZR : ONSUT unction (M - UZZR)...94 NT MP...95 NT MP : ONSUT unction (M - NT MP)...95 MUT RMOT NT...97 MUT RMOT NT : ONSUT unction (M - MUT RMOT NT)...97 MMU MMU : ONSUT unction (M - MMU) TTRY SVR TTRY SVR : ONSUT unction (M - TTRY SVR) TRUN TRUN : ONSUT unction (M - TRUN) TT M TT M : ONSUT unction (M - TT) RTN PWR RTN PWR : ONSUT unction (M - R- TN PWR) SN UR SN UR : ONSUT unction (M - SN UR) PN RM PN RM : ONSUT unction (M - PN RM) R PRSSUR MONTOR R PRSSUR MONTOR : ONSUT unction (M - R PRSSUR MONTOR) U NOSS NORMTON M (OY ONTRO MOU) Reference Value ail-safe T nspection Priority hart T ndex WRN RM M Wiring iagram MP...98 MP : ONSUT unction (M - MP)...98 WPR WPR : ONSUT unction (M - WPR) SR SR : ONSUT unction (M - S- R) R ONTONR R ONTONR : ONSUT unction (M - R ONTONR) (Manual /) OM SW OM SW : ONSUT unction (M - OM SW) M M : ONSUT unction (M - M) S-3 S NSPTON TON SRV WN RPN ONTRO UNT Work Procedure ONURTON (M) Work Procedure onfiguration list TRNST MO N OPRTON Work Procedure T/RUT NOSS U1000 N OMM S N O P

4 T ogic iagnosis Procedure U1010 ONTRO UNT (N) T ogic iagnosis Procedure N RUT OPN T ogic iagnosis Procedure POWR SUPPY N ROUN RUT iagnosis Procedure OMNTON SWT OUTPUT RUT. 135 iagnosis Procedure OMNTON SWT NPUT RUT iagnosis Procedure SYMPTOM NOSS OMNTON SWT SYSTM SYMP- TOMS Symptom Table NORM OPRTN ONTON RMOV N NSTTON M (OY ONTRO MOU) Removal and nstallation OMNTON SWT xploded View Removal and nstallation S-4

5 PRUTONS < PRUTON > [WT NTNT Y SYSTM] PRUTON PRUTONS Precaution for Supplemental Restraint System (SRS) "R " and "ST T PR-TNSONR" NO: The Supplemental Restraint System such as R and ST T PR-TNSONR, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted. nformation necessary to service the system safely is included in the SRS R and ST T of this Service Manual. WRNN: lways observe the following items for preventing accidental activation. To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in the event of a collision that would result in air bag inflation, all maintenance must be performed by an authorized NSSN/NNT dealer. mproper maintenance, including incorrect removal and installation of the SRS, can lead to personal injury caused by unintentional activation of the system. or removal of Spiral able and ir ag Module, see SRS R. Never use electrical test equipment on any circuit related to the SRS unless instructed to in this Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness connectors. PRUTONS WN USN POWR TOOS (R OR TR) N MMRS WRNN: lways observe the following items for preventing accidental activation. When working near the ir ag iagnosis Sensor Unit or other ir ag System sensors with the ignition ON or engine running, never use air or electric power tools or strike near the sensor(s) with a hammer. eavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing serious injury. When using air or electric power tools or hammers, always switch the ignition O, disconnect the battery, and wait at least 3 minutes before performing any service. S N O P S-5

6 OMPONNT PRTS < SYSTM SRPTON > [WT NTNT Y SYSTM] SYSTM SRPTON OMPONNT PRTS OY ONTRO SYSTM OY ONTRO SYSTM : omponent Parts ocation NO: MM0577ZZ 1. M. ehind of instrument lower panel (eft side) POWR ONSUMPTON ONTRO SYSTM POWR ONSUMPTON ONTRO SYSTM : omponent Parts ocation NO: MM0635ZZ 1. ombination meter 2. Multi display unit Refer to MS-3, "omponent Parts ocation". 4. M Refer to S-6, "OY ONTRO SYSTM : omponent Parts ocation". 3. PM /R Refer to PS-5, "omponent Parts ocation". S-6

7 SYSTM < SYSTM SRPTON > [WT NTNT Y SYSTM] SYSTM OY ONTRO SYSTM OY ONTRO SYSTM : System NO: OUTN M (ody ontrol Module) controls the various electrical components. t inputs the information required to the control from N communication and the signal received from each switch and sensor. M has combination switch reading function for reading the operation status of combination switches (light, turn signal, wiper and washer) in addition to a function for controlling the operation of various electrical components. t also has the signal transmission function as the passed point of signal and the power saving control function that reduces the power consumption with the ignition switch O. M is equipped with the diagnosis function that performs the diagnosis with ONSUT and various settings. M ONTRO UNTON ST System ombination switch reading system Signal buffer system Power consumption control system uto light system Turn signal and hazard warning lamp system eadlamp system Parking, license plate, side maker and tail lamps system ront fog lamp system xterior lamp battery saver system aytime running light system nterior room lamp control system nterior room lamp battery saver system llumination control system ront wiper and washer system Rear wiper and washer system Warning chime system Power door lock system Nissan Vehicle mmobilizer System (NVS) - NTS Vehicle security system Rear window defogger system ntelligent ey system/engine start system Theft warning alarm Panic alarm S-7 Reference S-9, "OMNTON SWT RN SYSTM : System iagram" S-12, "SN UR SYSTM : System iagram" S-13, "POWR ONSUMPTON ONTRO SYSTM : System iagram" X-8, "UTO T SYSTM : System iagram" X-11, "TURN SN N ZR WRNN MP SYS- TM : System iagram" X-7, "MP SYSTM : System iagram" X-12, "PRN, NS PT, S MRR N T MP SYSTM : System iagram" X-11, "RONT O MP SYSTM : System iagram" X-13, "XTROR MP TTRY SVR SYSTM : System iagram" X-10, "YTM RUNNN T SYSTM : System iagram" N-6, "NTROR ROOM MP ONTRO SYSTM : System iagram" N-8, "NTROR ROOM MP TTRY SVR SYSTM : System iagram" N-9, "UMNTON ONTRO SYSTM : System iagram" WW-6, "RONT WPR N WSR SYSTM : System iagram" WW-9, "RR WPR N WSR SYSTM : System iagram" WS-6, "WRNN M SYSTM : System iagram" -13, "System iagram" S-15, "NSSN V MMOZR SYSTM-NTS : System iagram" S-18, "V SURTY SYSTM : System iagram" -6, "WT UTO / : System iagram" (With automatic /) -6, "WTOUT UTO / : System iagram" (Without automatic /) -15, "NTNT Y SYSTM : System iagram" S N O P

8 SYSTM < SYSTM SRPTON > [WT NTNT Y SYSTM] System ack door opener system utomatic / ir conditioning control system Manual / Power window system Retained accessory power (Retain power operation) Tire pressure monitoring system (TPMS) OY ONTRO SYSTM : ail-safe Reference -26, "System iagram" -11, "System iagram" -99, "System iagram" PW-7, "POWR WNOW SYSTM : System iagram" PW-7, "POWR WNOW SYSTM : System " WT-8, "System " NO: S ONTRO Y T M performs fail-safe control when any T are detected. isplay contents of ONSUT ail-safe ancellation 2192: SOR M-M nhibit engine cranking rase T 2193: N O M-M nhibit engine cranking rase T 2195: NT-SNNN nhibit engine cranking gnition switch ON O 2196: ON N nhibit engine cranking rase T 2198: NTS NTNN MP nhibit engine cranking rase T 2608: STRTR RY nhibit engine cranking 260: N STT S OST 261: N RY O 262: N RY ON 263: STRT ONT RY ON 264: STRT ONT RY O 267: M nhibit engine cranking nhibit engine cranking nhibit engine cranking nhibit engine cranking nhibit engine cranking nhibit engine cranking by ntelligent ey system 500 ms after the following signal communication status becomes consistent Starter motor relay control signal Starter relay status signal (N) When any of the following conditions are fulfilled Power position changes to Receives engine status signal (N) When the following conditions are fulfilled gnition switch ON signal (N: Transmitted from M): ON gnition switch ON signal (N: Transmitted from PM /R): ON When the following conditions are fulfilled gnition switch ON signal (N: Transmitted from M): O gnition switch ON signal (N: Transmitted from PM /R): O When the following conditions are fulfilled Starter control relay signal (N: Transmitted from M): O Starter control relay signal (N: Transmitted from PM /R): O When the following conditions are fulfilled Starter control relay signal (N: Transmitted from M): ON Starter control relay signal (N: Transmitted from PM /R): ON When room antenna and luggage room antenna functions normally RR WPR MOTOR PROTTON M detects the rear wiper stopping position according to the rear wiper stop position signal. When the rear wiper stop position signal does not change for more than 5 seconds while driving the rear wiper, M stops power supply to protect the rear wiper motor. ondition of cancellation 1. More than 1 minute is passed after the rear wiper stop. 2. Turn rear wiper switch O. 3. Operate the rear wiper switch or rear washer switch. -S ONTRO O OMNTON SWT RN UNTON US Y OW POWR SUPPY VOT f voltage of battery power supply lower, M maintains combination switch reading to the status when input voltage is less than approximately 9 V. S-8

9 SYSTM < SYSTM SRPTON > [WT NTNT Y SYSTM] When voltage of battery power supply is approximately 9 V or more, combination switch reading function returns to normal operation. OMNTON SWT RN SYSTM OMNTON SWT RN SYSTM : System iagram NO: *: T MP switch links lighting switch 1ST and 2N positions. OMNTON SWT RN SYSTM : System NO: OUTN M reads the status of the combination switch (light, turn signal, wiper and washer) and recognizes the status of each switch. M has a combination of 5 output terminals (OUTPUT 1-5) and 5 input terminals (NPUT 1-5). t reads a maximum of 20 switch status. OMNTON SWT MTRX ombination switch circuit MM0636 S N O P *: T MP switch links lighting switch 1ST and 2N positions. MM0637 S-9

10 SYSTM < SYSTM SRPTON > [WT NTNT Y SYSTM] ombination switch NPUT-OUTPUT system list System NPUT 1 NPUT 2 NPUT 3 NPUT 4 NPUT 5 OUTPUT 1 R WSR R WPR OW TURN TURN R OUTPUT 2 R WPR R WPR NT PSSN MP 1 OUTPUT 3 NT VOUM 1 RR WSR MP 2 M OUTPUT 4 RR WPR NT NT VOUM 3 UTO T T MP OUTPUT 5 NT VOUM 2 RR WPR ON R O eadlamp has a dual system switch. OMNTON SWT RN UNTON M reads the status of the combination switch at 10 ms interval normally. PM0609 M reads the status of the combination switch at 60 ms interval when M is controlled at low power consumption control mode. M operates as follows and judges the status of the combination switch. - t operates the transistor on OUTPUT side in the following order: OUTPUT , and outputs voltage waveform. - The voltage waveform of OUTPUT corresponding to the formed circuit is input into the interface on NPUT side if any (1 or more) switches are ON. - t reads this change of the voltage as the status signal of the combination switch. Operation xample MM0326 S-10

11 SYSTM < SYSTM SRPTON > [WT NTNT Y SYSTM] n the following operation example, the combination of the status signals of the combination switch is replaced as follows: NPUT 1-5 to 1-5 and OUTPUT 1-5 to -. xample 1: When a switch (T MP switch) is turned ON The circuit between OUTPUT 4 and NPUT 5 is formed when the T MP switch is turned ON. PM1545 M detects the combination switch status signal 5 when the signal of OUTPUT 4 is input to NPUT 5. M judges that the T MP switch is ON when the signal 5 is detected. xample 2: When some switches (TURN R switch, T MP switch) are turned ON The circuits between OUTPUT 1 and NPUT 5 and between OUTPUT 4 and NPUT 5 are formed when the TURN R switch and T MP switch are turned ON. S M detects the combination switch status signal 5 when the signals of OUTPUT 1 and OUTPUT 4 are input to NPUT 5. M judges that the TURN R switch and T MP switch are ON when the signal 5 is detected. WPR NTRMTTNT POSTON M judges the wiper intermittent dial 1-7 by the status of NT VOUM 1, 2 and 3 switches. Wiper intermittent dial position Switch status PM1546 NT VOUM 1 NT VOUM 2 NT VOUM 3 1 ON ON ON 2 ON ON O 3 ON O O 4 O O O N O P S-11

12 SYSTM < SYSTM SRPTON > [WT NTNT Y SYSTM] Wiper intermittent dial position or details of wiper intermittent dial position, refer to WW-6, "RONT WPR N WSR SYSTM : System ". SN UR SYSTM SN UR SYSTM : System iagram Switch status NT VOUM 1 NT VOUM 2 NT VOUM 3 5 O O ON 6 O ON ON 7 O ON O NO: f vehicle models is gasoline engine models, oil pressure switch is not applied. SN UR SYSTM : System MM0578 NO: OUTN M has the signal transmission function that outputs/transmits each input/received signal to each unit. Signal transmission function list Signal name nput gnition switch ON signal Push-button ignition switch (Push switch) PM /R (N) nputs the push-button ignition switch (push switch) signal and transmits the ignition switch status judged with M via N communication. oor switch signal ny door switch ombination meter (N) PM /R (N) nputs the door switch signal and transmits it via N communication. lower fan ON signal / auto amp. (uto /) / control (Manual /) M (N) nput blower fan switch signal, and transmit the blower fan ON signal via N communication. S-12

13 SYSTM < SYSTM SRPTON > [WT NTNT Y SYSTM] / ON signal Signal name nput / auto amp. (uto /) / control (Manual /) M (N) Stop lamp switch signal Stop lamp switch TM (N) nterlock/pnp switch signal Transmission range switch PM /R (N) POWR ONSUMPTON ONTRO SYSTM POWR ONSUMPTON ONTRO SYSTM : System iagram nput / ON signal (automatic /) or / switch signal (manual /), and transmit the / ON signal via N communication. nputs the stop lamp switch 1 signal and stop lamp switch 2 signal, and transmits it via N communication. nputs the P/N position signal, and transmits the interlock/pnp switch signal via N communication. NO: MM0579 POWR ONSUMPTON ONTRO SYSTM : System NO: OUTN M incorporates a power saving control function that reduces the power consumption according to the vehicle status. M switches the status (control mode) by itself with the power saving control function. t performs the sleep request to each unit (PM /R, combination meter and multi display unit) that operates with the ignition switch O. Normal mode (wake-up) - N communication is normally performed with other units - ach control with M is operating properly N communication sleep mode (N sleep) - N transmission is stopped - ontrol with M only is operating ow power consumption mode (M sleep) - ow power consumption control is active - N transmission is stopped OW POWR ONSUMPTON ONTRO WT M M reduces the power consumption with the following operation in the low power consumption mode. The reading interval of the each switches changes from 10 ms interval to 60 ms interval. Sleep mode activation S N O P S-13

14 SYSTM < SYSTM SRPTON > [WT NTNT Y SYSTM] M receives the sleep-ready signal (ready) from PM /R and combination meter via N communication. M transmits the sleep wake up signal (sleep) to each unit when all of the N sleep conditions are fulfilled. ach unit stops the transmission of N communication with the sleep wake up signal. M is in N communication sleep mode. M is in the low power consumption mode and perform the low power consumption control when all of the M sleep conditions are fulfilled with N sleep condition. Sleep condition N sleep condition M sleep condition Receiving the sleep-ready signal (ready) from all units 1 minute after turning ignition switch O Theft warning alarm and panic alarm: Not operation Warning chime: Not operation ntelligent ey system buzzer: Not operation Stop lamp switch: O Turn signal indicator lamp: Not operation xterior lamp: O oor lock status: No change ONSUT communication status: Not communication Meter display signal: Non-transmission oor switch status: No change nterior room lamp battery saver: Time out* RP system: No communication Nissan Vehicle mmobilizer System (NVS) - NTS: Not operation Remote keyless entry receiver communication status: No communication Tire pressure monitoring system (TPMS): Stop /ON indicator lamp: Not operation *: Refer to N-8, "NTROR ROOM MP TTRY SVR SYSTM : System " for details of the interior room lamp battery saver time. Wake-up operation M transmits sleep wake up signal (wake up) to each unit when any condition listed below is established, and then goes into normal mode from low power consumption mode. ach unit starts transmissions with N communication by receiving sleep wake up signals. ach unit transmit wake up signals to M with N communication to convey the start of N communication. S-14

15 SYSTM < SYSTM SRPTON > [WT NTNT Y SYSTM] Wake-up condition M wake-up condition ack door opener switch: O ON N wake-up condition Receiving the sleep-ready signal (Not-ready) from any units Push-button ignition switch (push switch): O ON azard switch: ON M switch: O ON, ON O PSSN switch: O ON, ON O MP 1 switch: O ON, ON O MP 2 switch: O ON, ON O T MP switch: O ON R O switch: O ON, ON O TURN R: O ON, ON O TURN : O ON, ON O river door switch: O ON, ON O Passenger door switch: O ON, ON O Rear R door switch: O ON, ON O Rear door switch: O ON, ON O ack door switch: O ON, ON O river door request switch: O ON Passenger door request switch: O ON ack door request switch: O ON Stop lamp switch: ON oor lock and unlock switch: NUTR O, NUTR UNO ront door lock assembly (driver side) (door key cylinder switch): NUTR O, NUTR UNO Remote keyless entry receiver communication: Receiving ront door lock assembly (driver side) (unlock sensor): O ON, ON O S N O P S-15

16 NOSS SYSTM (M) < SYSTM SRPTON > [WT NTNT Y SYSTM] NOSS SYSTM (M) OMMON TM OMMON TM : ONSUT unction (M - OMMON TM) NO: PPTON TM ONSUT performs the following functions via N communication with M. iagnosis mode Work Support Self iagnostic Result N iag Support Monitor ata Monitor ctive Test cu dentification onfiguration unction hanges the setting for each system function. isplays the diagnosis results judged by M. Monitors the reception status of N communication viewed from M. The M input/output signals are displayed. The signals used to activate each device are forcibly supplied from M. The M part number is displayed. Read and save the vehicle specification. Write the vehicle specification when replacing M. SYSTM PPTON M can perform the following functions for each system. t can perform the diagnosis modes except the following for all sub system selection items. : pplicable item System Sub system selection item *: or models with automatic /, this diagnosis mode is not used. iagnosis mode Work Support ata Monitor ctive Test oor lock OOR O Rear window defogger RR OR Warning chime UZZR nterior room lamp timer NT MP xterior lamp MP Wiper and washer WPR Turn signal and hazard warning lamps SR ir conditioning system R ONTONR * ntelligent ey system ngine start system NTNT Y ombination switch OM SW ody control system M NVS - NTS MMU nterior room lamp battery saver TTRY SVR ack door open TRUN Theft warning alarm TT M RP RTN PWR Signal buffer system SN UR TPMS R PRSSUR MONTOR RZ RM T () The M records the following vehicle condition at the time a particular T is detected, and displays on ONSUT. S-16

17 NOSS SYSTM (M) < SYSTM SRPTON > [WT NTNT Y SYSTM] ONSUT screen item ndication/unit Vehicle Speed km/h Vehicle speed of the moment a particular T is detected Odo/Trip Meter km Total mileage (Odometer value) of the moment a particular T is detected Vehicle ondition SP>O SP>O O> >ON RUN> N ounter 0-39 RN>RUN RUN>URNT >O O>O O> ON>RN O>SP O>SP O O ON NN RUN RNN Power position status of the moment a particular T is detected *: Power position shifts to O from O, when ignition switch is in the O position, selector lever is in the P position (/T models and VT models), and any of the following conditions are met. losing door Opening door oor is locked using door request switch oor is locked using ntelligent ey The power position shifts to when the push-button ignition switch (push switch) is pushed at O. OOR O OOR O : ONSUT unction (M - OOR O) While turning M status from low power consumption mode to normal mode (Power position is O *.) While turning M status from low power consumption mode to normal mode (Power position is O.) While turning power position from O * *to While turning power position from to N While turning power position from RUN to (Vehicle is stopping and selector lever is except P position.) While turning power position from RNN to RUN (rom cranking up the engine to run it) While turning power position from RUN to (mergency stop operation) While turning power position from to O While turning power position from O to O * While turning power position from O to While turning power position from N to RNN While turning M status from normal mode (Power position is O.) to low power consumption mode While turning M status from normal mode (Power position is O *.) to low power consumption mode Power position is O * Power position is O (gnition switch O) Power position is (gnition switch ) Power position is N (gnition switch ON with engine stopped) Power position is RUN (gnition switch ON with engine running) Power position is RNN (t engine cranking) The number of times that ignition switch is turned ON after T is detected The number is 0 when a malfunction is detected now. The number increases like after returning to the normal condition whenever ignition switch O ON. The number is fixed to 39 until the self-diagnosis results are erased if it is over 39. NO: S N O P M ONSUT UNTON ONSUT performs the following functions via N communication with M. WOR SUPPORT S-17

18 NOSS SYSTM (M) < SYSTM SRPTON > [WT NTNT Y SYSTM] Monitor item OOR O-UNO ST UTOMT OOR O S- T UTOMT OOR UNO ST UTOMT O/UNO ST nti-hijack function mode can be changed to operation with this mode : Operate : Non-operation utomatic door lock function mode can be selected from the following in this mode V SP: ll doors are locked when vehicle speed more than 24km/h (15MP) P RN*: ll doors are locked when shifting the selector lever from P position to other than the P position utomatic door unlock function mode can be selected from the following in the mode MO 1: ll doors are unlocked when the power supply position is changed from ON to O MO 2*: ll doors are unlocked when shifting the selector lever from any position other than the P to P position MO 3: river side door is unlocked when the power supply position is changed from ON to O MO 4*: river side door is unlocked when shifting the selector lever from any position other than the P to P position MO 5: This item is displayed, but cannot be monitored MO 6: This item is displayed, but cannot be monitored utomatic door lock/unlock function mode can be selected from the following in this mode : Non-operational Unlock ly: oor unlock operation only ock ly: oor lock operation only ock/unlock: ock and unlock operation *: P range interlock door lock can be selected for M/T models, but automatic door lock/unlock function does not operate. T MONTOR Monitor tem RQ SW-R RQ SW-S RQ SW-/TR OOR SW-R OOR SW-S OOR SW-RR OOR SW-R OOR SW- O SW UNO SW Y Y -SW Y Y UN-SW ontents ndicated [/] condition of door request switch (driver side) ndicated [/] condition of door request switch (passenger side) ndicated [/] condition of back door request switch ndicated [/] condition of front door switch (driver side) ndicated [/] condition of front door switch (passenger side) ndicated [/] condition of rear door switch R ndicated [/] condition of rear door switch ndicated [/] condition of back door switch ndicated [/] condition of lock signal from door lock unlock switch ndicated [/] condition of unlock signal from door lock unlock switch ndicated [/] condition of lock signal from door key cylinder ndicated [/] condition of unlock signal from door key cylinder TV TST Test item OOR O RR WNOW OR This test is able to check door lock/unlock operation The all door lock actuators are locked when O on ONSUT screen is touched The all door lock actuators are unlocked when UN on ONSUT screen is touched The door lock actuator (driver side) is unlocked when R UN on ONSUT screen is touched The door lock actuator (passenger side) is unlocked when S UN on ONSUT screen is touched The door lock actuator (other) is unlocked when OTR U on ONSUT screen is touched S-18

19 NOSS SYSTM (M) < SYSTM SRPTON > [WT NTNT Y SYSTM] RR WNOW OR : ONSUT unction (M - RR OR) NO: ata monitor Monitor tem RR SW PUS SW isplays Press (ON)/other (O) status determined with the rear window defogger switch. ndicates [ON/O] condition of push switch. TV TST Test tem RR OR Rear window defogger operates when ON on ONSUT screen is touched. UZZR UZZR : ONSUT unction (M - UZZR) ONSUT PPTON TMS NO: Test item iagnosis mode ata Monitor isplays M input data in real time. UZZR ctive Test Operation of electrical loads can be checked by sending driving signal to them. T MONTOR isplay item [Unit] PUS SW [/] UN SN-R [/] V SP 1 [km/h] T MP SW [/] R O SW [/] OOR SW-R [/] O SW [/] TV TST isplay item [Unit] ST T WRN TST Y RMNR WRN T WRN M NT MP Status of push-button ignition switch judged by M. Status of unlock sensor judged by M. Value of vehicle speed signal received from combination meter with N communication line. Status of lighting switch judged by M using the combination switch readout function. Status of front fog lamp switch judged by M using the combination switch readout function. Status of driver side door switch judged by M. Status of door lock unlock switch judged by M. The seat belt warning chime operation can be checked by operating the relevant function (/). The key warning chime operation can be checked by operating the relevant function (/). The light warning chime operation can be checked by operating the relevant function (/). S N O P S-19

20 NOSS SYSTM (M) < SYSTM SRPTON > [WT NTNT Y SYSTM] NT MP : ONSUT unction (M - NT MP) NO: WOR SUPPORT P0093 ROOM MP TMR ST ST / -UN NTON *: actory setting T MONTOR Service item Setting item Setting ROOM MP ON TM ST ROOM MP O TM ST R MP TMR O ST MO 2 MO 3* MO 4 * MO 1 MO 2* MO 3 MO 4 MO 5 MO 1 MO 2* MO 3 MO 4 MO 5 MO 1* MO sec. 15 sec. Sets the interior room lamp ON time. (Timer operating time) 30 sec. With the interior room lamp timer function Without the interior room lamp timer function 0.5 sec. 1 sec. 2 sec. Sets the interior room lamp gradual brightening time. 3 sec. 0 sec. 0.5 sec. 1 sec. 2 sec. Sets the interior room lamp gradual dimming time. 3 sec. 0 sec. nterior room lamp timer activates with synchronizing all doors. nterior room lamp timer activates with synchronizing the driver door only. RQ SW-R [/] RQ SW-S [/] RQ SW-RR [/] RQ SW-R [/] Monitor item [Unit] The switch status input from request switch (driver side) The switch status input from request switch (passenger side) The item is indicated, but not monitored. S-20

21 NOSS SYSTM (M) < SYSTM SRPTON > [WT NTNT Y SYSTM] PUS SW [/] UN SN -R [/] OOR SW-R [/] OOR SW-S [/] OOR SW-RR [/] OOR SW- R [/] OOR SW- [/] O SW [/] UNO SW [/] TRN/T MNTR [/] Y Y -SW [/] Y Y UN-SW [/] R-O [/] R-UNO [/] Monitor item [Unit] Push switch status received from ntelligent ey unit by N communication The item is indicated, but not monitored The switch status input from front door switch (driver side) The switch status input from front door switch (passenger side) The switch status input from rear door switch R The switch status input from rear door switch The switch status input from back door switch ock switch status input from door lock and unlock switch Unlock switch status input from door lock and unlock switch The item is indicated, but not monitored ock switch status received from key cylinder switch Unlock switch status received from key cylinder switch ock signal status received from remote keyless entry receiver Unlock signal status received from remote keyless entry receiver TV TST NT MP MP MP : ONSUT unction (M - MP) WOR SUPPORT Test item Operation STP MP TST s the interior room lamp control signal to turn the interior room lamps ON. [Map lamp, room lamp (when applicable lamps switch is in OOR position.)] Stops the interior room lamp control signal to turn the interior room lamps. This item is indicated, but can not tested NO: S N O Service item Setting item Setting USTOM /T ST- TN* 1 MO 1* 2 MO 2 Normal More sensitive setting than normal setting (Turns ON earlier than normal operation) MO 3 More sensitive setting than MO 2 (Turns ON earlier than MO 2) MO 4 ess sensitive setting than normal setting (Turns ON later than normal operation) P S-21

22 NOSS SYSTM (M) < SYSTM SRPTON > [WT NTNT Y SYSTM] Service item Setting item Setting TTRY SVR ST Y ST* 1 T TMR UTO T O ST* 1 * 2 MO 1* 2 MO 2 MO 3 MO 4 MO 5 MO 6 MO 7 MO 8 MO 1 MO 2 *2 MO 1* 2 MO 2 MO 3 MO 4 MO 5 MO 6 With the exterior lamp battery saver function Without the exterior lamp battery saver function 45 sec. Without the function 30 sec. 60 sec. 90 sec. 120 sec. 150 sec. 180 sec. 10 sec. 30 sec. Sets delay timer function timer operation time (ll doors closed) Sets follow me home function activating time With twilight ON custom & with wiper NT, O and With twilight ON custom & with wiper O and With twilight ON custom & without Without twilight ON custom & with wiper NT, O and Without twilight ON custom & with wiper O and Without twilight ON custom & without * 1 : or models without auto light system, this item is displayed but is not operated. * 2 : actory setting T MONTOR PUS SW [/] Monitor item [Unit] NN STT [Stop/Stall/rank/Run] V SP 1 [km/h] The switch status input from push-button ignition switch The engine status received from M via N communication The value of the vehicle speed received from combination meter via N communication S-22

23 NOSS SYSTM (M) < SYSTM SRPTON > [WT NTNT Y SYSTM] TURN SN R [/] TURN SN [/] T MP SW [/] M SW [/] MP SW1 [/] MP SW2 [/] PSSN SW [/] UTO T SW* 1 [/] R O SW* 2 [/] OOR SW-R [/] OOR SW-S [/] OOR SW-RR [/] OOR SW- R [/] OOR SW- [/] OPT SNSOR [//N] OPT SN (TT)* 1 [V] OPT SN (T)* 1 [V] Monitor item [Unit] ach switch status that M judges from the combination switch reading function The switch status input from front door switch (driver side) The switch status input from front door switch (passenger side) The switch status input from rear door switch R The switch status input from rear door switch The switch status input from back door switch This item is indicated, but can not monitored The value of outside brightness voltage input from the optical sensor The value of outside brightness voltage filtered by M * 1 : or models without auto light system, this item is not displayed. * 2 : or models without front fog lamp, this item is displayed but is not monitored. TV TST T MP MP R O MP* 1 Test item Operation i o Transmits the position light request signal to PM /R via N communication to turn the tail lamp ON Stops the tail lamp request signal transmission Transmits the high beam request signal via N communication to turn the headlamp () Transmits the low beam request signal via N communication to turn the headlamp (O) Stops the high & low beam request signal transmission Transmits the front fog lights request signal to PM /R via N communication to turn the front fog lamp ON Stops the front light request signal transmission S N O P S-23

24 NOSS SYSTM (M) < SYSTM SRPTON > [WT NTNT Y SYSTM] YTM RUNNN T* 2 M SN Test item Operation Transmits the daytime running light request signal via N communication to PM /R Stop the daytime running light request signal transmission This item is indicated, but can not tested * 1 : or models without front fog lamp, this item is displayed but is not tested. * 2 : or models without daytime running light system, this item is not displayed. WPR WPR : ONSUT unction - WPR NO: WOR SUPPORT Service item Setting item WPR SP STTN *:actory setting T MONTOR * With vehicle speed (ront wiper intermittent time linked with the vehicle speed and wiper intermittent dial position) Without vehicle speed (ront wiper intermittent time linked with the wiper intermittent dial position) PUS SW [/] V SP 1 [km/h] R WPR [/] Monitor tem [Unit] R WPR OW [/] R WSR SW [/] R WPR NT [/] R WPR STOP [/] NT VOUM [1 7] RR WPR ON [/] RR WPR NT [/] RR WSR SW [/] RR WPR STOP [/] / WS SW [/] The switch status input from push-button ignition switch isplays the value of the vehicle speed signal received from combination meter via N communication Status of each switch judged by M using the combination switch reading function isplays the status of the front wiper stop position signal received from PM /R via N communication. Status of each switch judged by M using the combination switch reading function Status of each switch judged by M using the combination switch reading function Rear wiper motor (stop position) status input from the rear wiper motor The item is indicated, but not monitored TV TST S-24

25 NOSS SYSTM (M) < SYSTM SRPTON > [WT NTNT Y SYSTM] R WPR RR WPR SR SR : ONSUT unction (M - SR) WOR SUPPORT *: actory setting T MONTOR Test item Operation i o NT Transmits the front wiper request signal () to PM /R via N communication to operate the front wiper operation. Transmits the front wiper request signal (O) to PM /R via N communication to operate the front wiper O operation. Transmits the front wiper request signal (NT) to PM /R via N communication to operate the front wiper NT operation. Stops transmitting the front wiper request signal to stop the front wiper operation. the voltage to operate the rear wiper motor. Stops the voltage to stop the rear wiper motor. Service item Setting item Setting ZR NSWR ock ly Unlk ly ock&unlk * With locking only With unlocking only With locking/unlocking Without the function NO: Sets the hazard warning lamp answer back function when the door is lock/unlock with the request switch or the ntelligent ey. RQ SW-R [/] RQ SW-S [/] PUS SW [/] TURN SN R [/] TURN SN [/] ZR SW [/] R-O [/] R-UNO [/] R-PN [/] TV TST Monitor item [Unit] The switch status input from the request switch (driver side) The switch status input from the request switch (passenger side) The switch status input from the push-button ignition switch ach switch status that M detects from the combination switch reading function The switch status input from the hazard switch ock signal status received from the remote keyless entry receiver Unlock signal status received from the remote keyless entry receiver Panic alarm signal status received from the remote keyless entry receiver S N O P SR Test item Operation R s the voltage to blink the right side turn signal lamps s the voltage to blink the left side turn signal lamps Stops the voltage to turn the turn signal lamps O S-25

26 NOSS SYSTM (M) < SYSTM SRPTON > [WT NTNT Y SYSTM] R ONTONR R ONTONR : ONSUT unction (M - R ONTONR) (utomatic / ) NO: T MONTOR isplay tem ist Monitor tem [Unit] ontents N ON S [/] isplays the blower fan status as jugged from the / auto amp. R ON SW [/] isplays [OMP ()/OMP ()] status as judged from the / auto amp. NTNT Y NTNT Y : ONSUT unction (M - NTNT Y) NO: WOR SUPPORT Monitor item NS NT NOSS O/UNO Y -Y NN STRT Y -Y TRUN/SS T OPN ORN WT YSS O PN RM ST TRUN OPN Y O- TT O Y O WRN NT Y O N UNT ZR NSWR NS -Y O This function allows inside key antenna self-diagnosis oor lock/unlock function by door request switch mode can be changed to operation in this mode : Operate : Non-operation ngine start function mode can be changed to operation with this mode : Operate : Non-operation This item is displayed, but cannot be monitored orn reminder function mode by ntelligent ey button can be changed to operate (ON) or not operate (O) with this mode : Operate : Non-operation Panic alarm button pressing time on ntelligent ey remote control button can be selected from the following with this mode MO 1: 0.5 sec MO 2: Non-operation MO 3: 1.5 sec This item is displayed, but cannot be monitored ntelligent ey low battery warning mode can be changed to operation with this mode : Operate : Non-operation ey reminder function mode can be changed to operation with this mode : Operate : Non-operation azard reminder function mode by door request switch and ntelligent ey button can be selected from the following with this mode ock ly: oor lock operation only Unlock ly: oor unlock operation only ock/unlock: ock and unlock operation : Non-operation uzzer reminder function (lock operation) mode by door request switch can be selected from the following with this mode orn hirp: Sound horn uzzer: Sound ntelligent ey warning buzzer : Non-operation S-26

27 NOSS SYSTM (M) < SYSTM SRPTON > [WT NTNT Y SYSTM] NS -Y UNO SORT RNN OUTPUT ONRM Y O UTO O ST Monitor item S- RSUT Refer to S-58, "T ndex". T MONTOR uzzer reminder function (unlock operation) mode by door request switch can be changed to operation with this mode : Operate : Non-operation Starter motor can operate during the times below 70 msec 100 msec 200 msec t can be checked whether ntelligent ey code is registered or not in this mode uto door lock operation time can be changed in this mode MO 1: O MO 2: 30 sec MO 3: 1 minute MO 4: 2 minutes MO 5: 3 minutes MO 6: 4 minutes MO 7: 5 minutes Monitor tem RQ SW -R RQ SW -S RQ SW -/TR PUS SW UT SW* 1 ondition ndicates [/] condition of door request switch (driver side) ndicates [/] condition of door request switch (passenger side) ndicates [/] condition of back door request switch ndicates [/] condition of push-button ignition switch ndicates [/] condition of clutch interlock switch R SW 1 ndicates [/]* 2 condition of stop lamp switch power supply R SW 2 ndicates [/] condition of stop lamp switch T/N SW ndicates [/] condition of P position ST PN/N SW ndicates [/] condition of P or N position UN SN -R ndicates [/] condition of driver door UNO status PUS SW -PM ndicates [/] condition of push-button ignition switch N RY1 -/ ndicates [/] condition of ignition relay 1 T SW -PM ndicates [/] condition of P position ST PN -PM ndicates [/] condition of P or N position ST P -MT ndicates [/] condition of P position ST N -MT ndicates [/] condition of N position NN STT ndicates [Stop/Stall/rank/Run] condition of engine states S/ O-PM This item is displayed, but cannot be monitored S/ UN-PM S/ RY-RQ V SP 1 V SP 2 OOR STT-R OOR STT-S This item is displayed, but cannot be monitored This item is displayed, but cannot be monitored isplay the vehicle speed signal received from combination meter by numerical value [m/h] isplay the vehicle speed signal received from S or V or TM by numerical value [m/h] ndicates [O/RY/UN] condition of driver side door status ndicates [O/RY/UN] condition of passenger side door status S N O P S-27

28 NOSS SYSTM (M) < SYSTM SRPTON > [WT NTNT Y SYSTM] Monitor tem O PRMT N STRT PRMT R STRT TRN/T MNTR R-O R-UNO R-TR/ R-PN R-MO R OP OUN1 R OP OUN2 ondition ndicates [Set/Reset] condition of key ndicates [Set/Reset] condition of engine start possibility This item is displayed, but cannot be monitored This item is displayed, but cannot be monitored ndicates [/] condition of O signal from ntelligent ey ndicates [/] condition of UNO signal from ntelligent ey This item is displayed, but cannot be monitored ndicates [/] condition of PN button of ntelligent ey ndicates [/] condition of MO N signal from ntelligent ey When remote keyless entry receiver receives the signal transmitted while operating on ntelligent ey, the numerical value start changing This item is displayed, but cannot be monitored * 1 : t is displayed but does not operate on VT models. * 2 : O is displayed when brake pedal is depressed while brake switch power supply is O. TV TST Test item OUTS UZZR NS UZZR NTOR NT MP SR ORN P RN This test is able to check ntelligent ey warning buzzer operation : Operate : Non-operation This test is able to check warning chime in combination meter operation Take Out: Take away warning chime sounds when ONSUT screen is touched ey: ey warning chime sounds when ONSUT screen is touched nob: O position warning chime sounds when ONSUT screen is touched : Non-operation This test is able to check warning lamp operation Y ON: Y Warning lamp illuminates when ONSUT screen is touched Y N: Y Warning lamp blinks when ONSUT screen is touched : Non-operation This test is able to check interior room lamp operation : Operate : Non-operation This test is able to check meter display information P N: ngine start operation indicator lamp indicate when ONSUT screen is touched P : ngine start operation indicator lamp indicate when ONSUT screen is touched N: This item is displayed, but cannot be monitored ROTT: This item is displayed, but cannot be monitored ST P: Shift P warning lamp indicate when ONSUT screen is touched NSRT: This item is displayed, but cannot be monitored TT: ey warning lamp indicator when ONSUT screen is touched NO Y: ey warning lamp indicator when ONSUT screen is touched OUTY: ngine start operation indicator lamp indicate when ONSUT screen is touched WN: ngine start operation indicator lamp indicate when ONSUT screen is touched This test is able to check security hazard lamp operation The hazard lamps are activated after /R/ on ONSUT screen is touched This test is able to check horn operation The horn is activated after ON on ONSUT screen is touched This test is able to check VT shift selector power supply : Operate : Non-operation S-28

29 NOSS SYSTM (M) < SYSTM SRPTON > [WT NTNT Y SYSTM] OM SW OM SW : ONSUT unction (M - OM SW) T MONTOR M Test item NN SW UM PUS SWT NTOR TTRY SVR TRUN/ OOR Monitor item [UNT] R WPR [/] R WPR OW [/] R WSR SW [/] R WPR NT [/] NT VOUM [1-7] TURN SN R [/] TURN SN [/] T MP SW [/] M SW [/] MP SW 1 [/] MP SW 2 [/] PSSN SW [/] UTO T SW [/] R O SW [/] M : ONSUT unction (M - M) This test is able to check push-ignition switch illumination operation Push-ignition switch illumination illuminates when ON on ONSUT screen is touched This test is able to check O indicator in push-ignition switch operation O indicator in push-ignition switch illuminates when ON on ONSUT screen is touched This test is able to check interior room lamp operation. The interior room lamp will be activated after ON on ONSUT screen is touched. This test is able to check back door opener actuator open operation. This actuator opens when Open on ONSUT screen is touched. NO: isplays the status of the R WPR switch in combination switch judged by M with the combination switch reading function. isplays the status of the R WPR OW switch in combination switch judged by M with the combination switch reading function. isplays the status of the R WSR switch in combination switch judged by M with the combination switch reading function. isplays the status of the R WPR NT switch in combination switch judged by M with the combination switch reading function. isplays the status of wiper volume dial position judged by M with the combination switch reading function. isplays the status of the TURN R switch in combination switch judged by M with the combination switch reading function. isplays the status of the TURN switch in combination switch judged by M with the combination switch reading function. isplays the status of the T MP switch in combination switch judged by M with the combination switch reading function. isplays the status of the M switch in combination switch judged by M with the combination switch reading function. isplays the status of the MP 1 switch in combination switch judged by M with the combination switch reading function. isplays the status of the MP 2 switch in combination switch judged by M with the combination switch reading function. isplays the status of the PSSN switch in combination switch judged by M with the combination switch reading function. isplays the status of the UTO T switch in combination switch judged by M with the combination switch reading function. isplays the status of the R O switch in combination switch judged by M with the combination switch reading function. NO: S N O P WOR SUPPORT tem RST STTN VU MMU Return a value set with Work Support of each system to a default value in factory shipment. S-29

30 NOSS SYSTM (M) < SYSTM SRPTON > [WT NTNT Y SYSTM] MMU : ONSUT unction (M - MMU) NO: WOR SUPPORT Service item ONRM ON t is possible to check that dongle unit is applied to the vehicle. T MONTOR Monitor item ONRM ONRM 4 ONRM 3 ONRM 2 ONRM 1 NOT RSTR TP 4 TP 3 TP 2 TP 1 PUS SW ontent ndicates [YT] at all time. Switches to [ON] when a registered ntelligent ey backside is contacted to push-button ignition switch. ndicates [ O] when key that is registered is received or is not yet received. ndicates [ N] when key that is not registered is received. ndicates the number of s that are registered. ndicates [ON/O] condition of push-button ignition switch. TV TST TT N Test item TTRY SVR This test is able to check security indicator lamp operation. Security indicator lamp is turned on when ON on ONSUT screen is touched. TTRY SVR : ONSUT unction (M - TTRY SVR) NO: WOR SUPPORT ROOM MP TMR ST TTRY SVR ST *:actory setting T MONTOR Service item Setting item Setting ROOM MP T SV ST MO 1 MO 2 MO 3 * * * 30 min. 60 min. 15 min. Sets the interior room lamp battery saver timer operating time. With the exterior lamp battery saver function Without the exterior lamp battery saver function With the interior room lamp battery saver function Without the interior room lamp battery saver function S-30

31 NOSS SYSTM (M) < SYSTM SRPTON > [WT NTNT Y SYSTM] RQ SW-R [/] RQ SW-S [/] RQ SW-RR [/] RQ SW-R [/] PUS SW [/] UN SN -R [/] OOR SW-R [/] OOR SW-S [/] OOR SW-RR [/] OOR SW- R [/] OOR SW- [/] O SW [/] UNO SW [/] TRN/T MNTR [/] Y Y -SW [/] Y Y UN-SW [/] R-O [/] R-UNO [/] TV TST Monitor item [Unit] *: ach lamp switch is in ON position. TRUN TRUN : ONSUT unction (M - TRUN) The switch status input from request switch (driver side) The switch status input from request switch (passenger side) The item is indicated, but not monitored. Push switch status received from ntelligent ey unit by N communication The item is indicated, but not monitored The switch status input from front door switch (driver side) The switch status input from front door switch (passenger side) The switch status input from rear door switch R The switch status input from rear door switch The switch status input from back door switch ock switch status input from door lock and unlock switch Unlock switch status input from door lock and unlock switch The item is indicated, but not monitored ock switch status received from key cylinder switch Unlock switch status received from key cylinder switch ock signal status received from remote keyless entry receiver Unlock signal status received from remote keyless entry receiver Test item Operation TTRY SVR uts the interior room lamp power supply to turn interior room lamps O. s the interior room lamp power supply to turn interior room lamps ON.* NO: S N O P T MONTOR S-31