Precision Potentiometers, Turns-Counting Dials and Servo Components
|
|
- Emmeline Sparks
- 5 years ago
- Views:
Transcription
1 Selection Guide For Precision Potentiometers, Turns-Counting Dials and Components Multi-turn Potentiometers See pages 29 to 48 Appearance Model Construction Resistive Outer Shaft ( mm.) ( mm.) Standard Special HP.5 4 World's smallest multi-turn pot. since HP (12HP-E) 12HPC (12HPC-E) Pipe type 1 (.175) Small multi-turn pot. with outer dia. of 1mm. Terminals for P.C. board are also available in addition to standard lug terminals. Low-cost small multi-turn pot. with outer dia. of 1mm. Terminals for p.c. board and rear lug terminals are also available in addition to standard lug terminals. 2 () 4 (5) 20HP 20 Precision multi-turn pot. with outer dia. of 20mm. type and with limit-switches adaptor are also available. 22HP 22.5 Lowest-cost multi-turn pot. with outer dia. of 22mm. and this pot. has an international patented snapping-in construction. 7 25HP 25 4 Precision multi-turn pot. with outer dia. of 25mm. There are 4 kinds of combination with a shaft and a bushing dimensions. 8 4HD 4 Drum type 0HDS 27 Precision multi-turn pot. with outer dia. 4mm. and high reliability. This pot. is manufacturing continuously over 45 years. With limit-switches incorporated type is also available. Super-precision small multi-turn pot. with outer dia. of 27mm. Independent linearity tolerance of ±0.05% to ±0.025% is available HDS 49 Super-precision multi-turn pot. with outer dia. of 49mm. Independent linearity tolerance of ±0.02% to ±0.01% is available HHP (12HHP-E) 1 (.175) Small size, high resolution and long life are offerable and outer dimensions are same as those of model 12HP series. 4 (44) 20HHP Pipe type Hybrid 20 High resolution and long life are offerable and outer dimensions are same as those of model 20HP series HHP 22.5 Low-cost, high resolution and long life are offerable and outer dimensions are same as those of model 22HP series. type is also available. 4 7
2 Turns-Counting Dials See pages 49 to 0 Appearance Model Read-out MA Max. Number of Turns-Counting, 5,, 15, 20 (mm.) Matching Shaft Special graduations are available and this dial is always supplying by the pot. and dial combination from us because of necessity of a little technical skill to the pot. with this dial. 50 MB The window of read-out is larger for easy reading. 52 MF Analog There are 4 kinds of size in this series and all of them have an international patented flexible coupling inside. 5 MG Low-cost and most popular type and 2 kinds of lock mechanism are selected. 55 DA 24 Round-shaped digital read-out dial. To save the height of this dial above the panel, the combination with this dial, recessed adaptor and the pot. is available. 5 DB Digital Rectangular shape digital read-out dial. With or without an international patented flexible coupling inside are selected. 57 DC Low-cost and round-shaped digital dial. Recessed ing type is selected turn Potentiometers See pages 1 to 85 Appearance Model Output Resistive ( mm.) Shaft Standard Special CP22C Low-cost, metal housing and rear lug terminals. CP22E Linear Bushing 22 Low-cost, plastic housing with an international patented snapping-in construction and side lug terminals. 4 CP22 See next page
3 1-turn Potentiometers See pages 1 to 85 Appearance Model Output Resistive ( mm.) Shaft Standard Special CP0 27 CP45 41 type with ball bearings and there are 4 kinds of outer diameter of the body for your suitable selection. Turret side terminals are fitted. 7 CP50 8 FCP12AC Bushing Low-cost and rear pin terminals. 9 1 FCP12A type with ball bearings and rear pin terminals FCP22AC Low-cost, metal housing and rear turret terminals. 70 FCP22E Linear Bushing Low-cost, plastic housing with an international patented snapping-in construction and side lug terminals FCPS22AC Conductive Plastic Low-cost, servo type with oilless metal bearings and rear turret terminals. 72 FCP22A 72 7 FCP0A FCPA 27 7 type with ball bearings and there are 4 kinds of outer diameter of the body for your suitable selection. Turret side terminals are fitted FCP50A
4 1-turn Potentiometers See pages 1 to 85 Resistive ( mm.) Appearance Model Output Shaft Standard Special LNB22 Linear 22 2 Low-torque, servo type with ball bearings with outer diameter of 22mm SCB50 Most popular functional precision pot. with a wirewound resistive element. Sine-cosine output is standard version. 80 FP50 Various kinds of special output function are available in this series. E.G. X 2 1, X etc.. 81 FSCB22A FSCB0A Non- Linear 27 type with ball bearings and precision sine-cosine output potentiometers with different kinds of body diameter FSCB50A Conductive Plastic 8 FFP12A 1 Miniature sized servo type with ball bearings and special output functions are available. Rear pin terminals. 84 FFP22A 22 type with ball bearings. Various kinds of special output function are available in this series. 85 Linear-motion Potentiometers See pages 87 to Appearance Model Resistive Shaft/ (mm.) Body(H W) Shaft Standard Special 18LP Screw holes and Rear 0LP 2 2 Screw holes 5 Rigid housing case. Stroke from 15mm. to 0mm. is available. Medium stroke from 50mm. to 200mm. is available
5 Linear-motion Potentiometers See pages 87 to Appearance Model Resistive Shaft/ and Rear 50LP Using fixing nails and Rear 8FLP 8 7 Circle holes (mm.) Body(H W) 8 12* (over00 strokes) 2 Shaft Standard Special Long stroke from 00mm. to 1,000mm. is available. Miniature sized and low-cost item with leadwire terminals. (Stroke: mm.) FLP 11 1 Circle holes M (threaded) Low-cost item with side turret terminals and a thread cutting at the end of shaft. (Stroke: 12mm. to 0mm.) 94 15FLP and Rear Screw holes M (threaded) Low-cost item with a thread cutting at the end of shaft and short stroke from mm. to 0mm FLPA Screw holes Rigid housing case and with fastonterminals. (Stroke: 15mm. to 0mm.) 9 18FLPB 18FLPC Conductive Plastic Using fixing nails and Rear Using fixing nails M4 (threaded) Ball tip Connector block on the housing case and a shaft with a cardan joint. (Stroke: 25mm. to 150mm.) Connector block on the housing case and a shaft with a spring return device and a ball tip at the end of shaft. (Stroke: 25mm. to 50mm.) FLP Using fixing nails 5 2 M5 (threaded) Medium and long stroke from 0mm. to 1,000mm. is available and with a connector as terminals. 99 Slider/ FLP Using 47 fixing nails Travelling by a slider Long stroke from 200mm. to 1,000mm. is available. Dust-proof and with a connector as terminals. 0 Slider/ CFL Circle holes Travelling by a slider Long stroke from 200mm. to 1,000mm. is available. Open-frame housing. 1 Slider/ 9HLP Hybrid 20 9 Circle holes Travelling by a slider with knob Manual adjustment by operating the knob. (Stroke: 0mm. and 120mm.) 2 11
6 Oil-filled Potentiometers See pages 4 to 115 Appearance Model Mechanism Resistive Body Outer ( mm.) Shaft Standard OF Small sized 1-turn and generalpurpose type. Bushing OF turn type OF50PB General-purpose type with a stopper and suitable for highvoltage use. Long-life type with sleeve bearings and a stopper. Suitable for highvoltage use. 7 8 OFCP Long-life type with servo and ball bearings. Suitable for precision servo use. (endless) 9 OF4HD 2 5 Precision multi-turn type and servo type is also available. 1 OF20HHP Multiturn type Hybrid 2 5 Small sized precision multi-turn type with long-life and high resolution. type is also available turn Conductive Bushing OF0-MCA 5 type Plastic 5 Small sized long-life 1-turn type and with infinite resolution. 112 OFLP Small sized long-life linear-motion type with leadwire terminals. (Stroke: 0mm. to 0mm.) 11 Linearmotion 20 5 OF20LP type 55 Long-life type with a water-proof connector. (Stroke: 0mm. to 200mm.) 114 Ball end OFLP ing With a universal joint 55 Long-life and long stroke type with a water-proof connector. (Stroke: 0mm. to 00mm.)
7 Contactless Potentiometers See pages 11 to 121 Appearance Model Outer ( mm.) Body Shaft Grade(IP) KSM22F KSM22FI Bushing 4 5 Popular type with oilless bearings. Possible to meet with special requirements. Completely sealed type with oilless bearings. Possible to meet with special requirements. 118 KSM22FS 22 Low-torque and long-life type with ball bearings. Possible to meet with special requirements. KSM22E Low-cost type with oilless bearings. KSM22EI Bushing 4 Simple sealed version of lowcost type with oilless bearings. 119 LSM22--5 LSM LSM Linear-motion contactless potentiometer. 121 Digital Potentiometers See pages 122 to 12 Appearance Model Using DP Potentiometer use Fixed resistors connected in parallel For use of voltage adjustment. 2 to 4 digits connected type is available. 12 MR Rheostat use Fixed resistors connected in series For use of current adjustment. 2 to 4 digits connected type is available. Components See pages 124 to 15 Kinds Appearance Model Rating, etc. Motor Potentiometer MPH22 MPH0 V.D.C., 0.2W type (With A motor) V.D.C., 0.4W type (With B motor) Panel ing type for 1-turn or -turn potentiometer to be combined. Chasis ing type for 1-turn or -turn potentiometer to be combined. Suitable for use of automatic balancer
8 Components See pages 124 to 15 Kinds Appearance Model Rating, etc. Motor Potentiometer MPH5 MPH4 V.D.C.,.1W type (With C motor) Panel ing type for 1-turn potentiometer to be combined. Panel ing type for multi-turn potentiometer to be combined Amplifier AP121 Output: W Change over of ±, ±12 and ±18V is possible. Developed only for use of our motor-potentiometers. Save-energy type with pulse width modulated control. 129 D.C. Power Supply AP9201A Output ±ma(±v) for pot. Abt. 700mA(24V) for amp. Power supply for driving of motorpotentiometer and servo amplifier. Helicaswitch 50HS 0 contacts/1 circuit Patented multi-turn rotary switch. Can select a heavy starting torque type (H) or light starting torque type (L). (H) is our standard version. 1 Coupling C17 Allowable eccentricity: Below 0.15mm. Allowable angle of deflection: Below 5 Allowable torque: 0.9N m(9kgf m) Mountable to fit the shaft diameters of, 4, 5 and mm. Slipping Clutch USC15 USC20 Slipping torque 20mN m (200gf cm) Slipping torque 50mN m (500gf cm) For low torque use. Mountable to fit the shaft diameters of 2,, 4, 5 and mm. For high torque use. Mountable to fit the shaft diameters of 4, 5 and mm. 14 SFN1 For servo dia. from 0 to 50mm. (For large diameter) For large diameter fixing to be used by pcs. Fixing Nail for use of servo type potentiometer SFN2 For servo dia. from 19 to 25mm. (For medium diameter) For medium diameter fixing to be used by pcs. 15 SFN For servo dia. from 9 to 12mm. (For small diameter) For small diameter fixing to be used by 2 pcs. Joystick Controller Foot Controller Outline Explanation Only (For details, please refer to separate catalog on joystick controllers / foot controllers.)
Section 26: Capacitors, Resistors, Potentiometers, Trimmers. Capacitors Resistors Potentiometers Trimmers...
Section 26: Capacitors, Resistors, Potentiometers, Trimmers Sub-Section Page Capacitors.....................................................680 Resistors......................................................681
More informationRotary Potentiometer. 1/2 Watt, Composition. Electrocomponents. Industrial 24mm Diameter. Rotary Potentiometer. Features
Electrocomponents Series 450 Data Sheet Rotary Potentiometer Industrial 4 Diameter 1/ Watt, Composition Rotary Potentiometer Features - Bushing - Twist or Bend Tab - Snap-in PC Bracket - PC Terminal Electrical
More informationRotary Motor-driven Potentiometer
Motor-driven Potentiometer Available in a variety of models, for remote controls for various equipment. Features Remote-controllable potentiometers for various audio products. Supports motor driving and
More informationPOSITION TRANSMITTERS
POSITION TRANSMITTERS GENERAL DESCRIPTION Jordan Control s Series of position transmitters are rugged, compact industrial components that couple a precision feedback component and/or limit switches to
More informationSeries 270. Commercial Miniature 5/8" (16mm) Diameter Composition Variable Resistors. Electrical and Mechanical Specifications.
Series 270 Commercial Miniature 5/8" (16mm) Diameter Composition Variable Resistors Miniature 5/8" (16mm) size Versatile mounting styles: bushing twist tab bend tab snap-in PC bracket solder lug or PC
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More informationT he Cole Series P3900 miniature P.C. termination rotary switch
P3900 series T he Cole Series P3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,
More informationLINEAR ACTUATOR INDUSTRIAL DUTY LACT BALL SCREW DRIVE
Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame with stainless steel extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [152mm], 8 [203mm], 12 [305mm],
More informationBESTSELLER. Linear bushings. Product properties:
are reliable and cost-efficient bearings based on the roller bearing principle. Hereby, the balls move along an internal track on the load side, and then return via a return track resulting in an overall
More informationPOTENTIOMETERS ENCODERS & CODED SWITCHES TP/RH7& TP/RH9.
POTENTIOMETERS ENCODERS & CODED SWITCHES TP/RH7& TP/RH9 www.tocos.com We are TOCOS TOCOS America, Inc. is a wholly owned subsidiary of Tokyo Cosmos Electric Co., Ltd. ( TOCOS), a worldwide supplier of
More informationPOWER SUPPLY MODEL XP-800. TWO AC VARIABLE VOLTAGES; 0-120V and 7A, PLUS UP TO 10A. Instruction Manual. Elenco Electronics, Inc.
POWER SUPPLY MODEL XP-800 TWO AC VARIABLE VOLTAGES; 0-120V and 0-40V @ 7A, PLUS 0-28VDC @ UP TO 10A Instruction Manual Elenco Electronics, Inc. Copyright 1991 Elenco Electronics, Inc. Revised 2002 REV-I
More informationDLA SERIES + ACCESSORIES
LINEAR ACTUATORS SERIES + ACCESSORIES 50 mm to 300 mm stroke 10 N series 50-300 mm 0-10 N 95 Ø40 9 Extracted - - Example: --5-A-50- Reduction 5 10 30 40 Voltage (VDC) / / / / / Max. thrust (N) 0 300 500
More informationSTRIP NAILER. Model NR 90AD (E3) LIST NO. E016 38A 16A 37A 18A 41A 19A 40A 38A 46B 47A 76A 96 46A 75A 24A 23A 48A 68A 50A 32B 51A 32A 52A 53B 53A 54A
5A 28A 48A 24A 29A 35A 59A 58A 57A 56A 55A 54A 53A 52A 46B 47A 50A 41A 37A 39 73A 79B 85A 81A 20 44 45 38 49 51A 34A 89A 506 501 505 1 2 3 4 6 7 8 9 10 11 12 13A 14 15 16 17 18 19 20 91 22 23 25 1 27 29
More information8710 EN. Potentiometric Displacement Sensors. Models 8710, 8711
Potentiometric Displacement Sensors Models 8710, 8711 Code: Delivery: Warranty: 8710 EN ex stock 24 months Model 8711 Model 8710 Application Displacement sensors models 8710 and 8711 with resistance tracks
More informationMP-Series Integrated Gear Motors
Installation Instructions MP-Series Integrated Gear Motors (Catalog Numbers: MPG-A004-031, MPG-A004-091, MPG-A010-031, MPG-A010-091, MPG-B010-031, MPG-B010-091, MPG-A025-031, MPG-A025-091, MPG-B025-031,
More informationLINEAR ACTUATOR INDUSTRIAL DUTY LACT ACME DRIVE SERIES
Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame and extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [152mm], 8 [203mm], 12 [305mm], 18 [457mm], 24 [610mm],
More informationElectromechanical Line Card Catalog
Electromechanical Line Card Catalog 800-344-2112 na.industrial.panasonic.com industrial@us.panasonic.com ELECTROMECHANICAL na.industrial.panasonic.com/products/electromechanical Light Touch Switches Detector
More informationLINEAR ACTUATOR INDUSTRIAL DUTY 10A SERIES
Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame and extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [153mm], 8 [203mm], 12 [305mm], 18 [457mm], 24 [610mm],
More informationROTARY SWITCHES. Quality Features: LIGHTED ROTARY UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.
SWITCH R2 UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.83 PANEL CUTOUT Used in the heavy equipment, marine, process control and instrumentation markets the R2 rotary switch
More informationProduct and Company Overview
Product and Company Overview Company History Founded in 1885 2015 marked 130 years of incorporation 12 Factories 2,850 Employees $500 Million in Revenue Quality is First and Foremost Quick Delivery (1-9
More informationLINEAR ACTUATOR INDUSTRIAL DUTY LACT SERIES
Product Data Sheet Standard Features: All steel frame and extension tube o Aluminum gearbox housing o Ball screw version has stainless steel extension tube Nominal stroke lengths: 4 [102mm], 6 [152mm],
More informationEnvironment-Sealed Basic Switches
HoneywellSensing and Control 1-800-537-6945 USA 1-815-235-6847International 1-416-293-8111Canada 13 Environment-Sealed Basic Switches GENERAL INFORMATION SE and XE switches are the smallest environment-sealed
More informationT he Cole Series S3900 miniature P.C. termination rotary switch
S3900 series T he Cole Series S3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,
More informationData Sheet for Precision Potentiometer
The RP22/23 potentiometers in 22 mm metal housing are suitable for applications where a accurate and compact sensor with high electrically effective rotation angle is required. Accurate wirewound potentiometer
More informationTurboDisc Stepper Motors
TurboDisc Stepper Motors P43 P532 P31 P11 P1 The TurboDisc provides exceptional dynamic performance unparalleled by any other stepper on the market. The unique thin disc magnet enables finer step resolutions
More informationSTAR. series. 2-Stage Servovalve Flight Simulation Motion Control. Features
STAR series 99 2-Stage Servovalve Flight Simulation Motion Control Features Maximum operating pressure 14 bar ISO 1372-6-5--92 mounting pattern Internal pilot supply (4 port) Low hysteresis & zero point
More informationChanges in direction.! Using pulleys with belts
Mechanisms Changes in direction! Using pulleys with belts Changes in direction! Using friction wheels Changes in direction! Using gears Worm drive! Reduces the speed! It is non-reversible Worm drive! Multiple
More informationDIM. A (+ 0,05 0,51) .437 ±.020 (11,10 ± 0,51) DIM. F ±.015 (0,38) INTEGRAL ASSEMBLY NUT, DO NOT REMOVE
Multi-Deck SERIES,, and " Diameter, Amp, Standard, Military SR0 FEATURES Rugged Construction Insures Switch Operation for the Life of Your Equipment Many Circuitry Options MIL Qualified Versions MIL-S-/0
More informationAirflex Spring Applied Brakes
Airflex Spring Applied Brakes CS and CSA Brake Elements... 232 Technical and Dimensional Data... 233 Applications... 235 Component Parts... 237 CTE Brake Elements... 239 Technical and Dimensional Data...
More informationROD SLIDERS INDEX ACTUATORS GENERAL CATALOG. Characteristics 779. Handling Instructions, and Precautions 783
Presenting our CAD drawing data catalog ACTUATORS GENERAL CATALOG ROD SLIDERS INDEX Characteristics 779 Handling Instructions, and Precautions 783 Standard Cylinders Specifications 785 Order 78 Dimensions
More informationSLS Linear Displacement Sensors
YOUR PARTNERS In Control SLS Linear Displacement Sensors Creative solutions for position measurement and control Hybrid Technology LINEAR SENSORS Hybrid Track The SLS range of linear position sensors is
More informationLinear Rotary Motors. Linear-Rotary Motors. The linear motor technology for industrial applications. Linear and rotary direct drive
Linear Rotary Motors Linear-Rotary Motors Linear and rotary direct drive Independent linear and rotary motion Synchronised linear and rotary motion Programmable press force up to 1 24N Programmable tightening
More informationElectronic Sensors Solid State, Reed and Proximity Sensors Feedback Packages
Electronic Solid State, Reed and Proximity Feedback Packages & Feedback Contents Hall Effect... 2 Reed Switches... 3 Cordsets... 4 Proximity... 5 Feedback Packages... 8 1 Sensor Specifications Solid State
More informationData Sheet. HEDR-54xx Series Mid-Sized Housed Encoder. Description. Features. applications. Available Styles
HEDR-54xx Series Mid-Sized Housed Encoder Data Sheet Description The HEDR-542x series are high performance, cost-effective, two-channel optional incremental housed encoders. These encoders emphasize high
More informationInstallation & Operation Manual. Electrak 10 Series / Electromechanical Linear Actuator
www..com Installation & Operation Manual Electrak 10 Series / Electromechanical Linear Actuator INTRODUCTION Thomson has many years of experience designing and manufacturing linear actuators for a wide
More informationSupport Units. FA Units
Support Units FA Units Sungil Support Units EK, EF Type Support Units BK, BF Type Support Units AK, AF Type Support Units FK, FF Type Support Units Support Units Sungil Support Units Lock Nut Joint Unit
More informationHeavy Duty Actuator Type HDS and HDB With Ball Screw or Belt Drive
Heavy Duty Actuator Type HDS and HDB With Ball Screw or Belt Drive Catalog No. 0001-A Introducing Bearing Engineers new line of Heavy Duty Actuators Type HDS & HDB Construction 1. Base: Anodized Aluminum
More informationDial and Electronic. Indicators Gauges
Dial and Electronic Indicators Gauges 37 AGD Group 2 2900 Electronic Indicators Innovative, Full Featured & Tough 2900 Electronic Indicators are available in a choice of configurations to meet a range
More informationSTAR Ball Rail Tables TKK
before operating X4 X8 X3 X1 X2 S1 S2 12 4 13 5 14 6 15 7 16 8 1 2 3 9 10 11 1 2 3 4 5 6 8.8 S3 X30 Indramat DANGER! AC-CONTROLLER High voltage Danger of electrical shock Do not touch electrical connnections
More informationLINEAR ACTUATOR INDUSTRIAL DUTY 10A/B SERIES
Product Data Sheet Standard Features: All steel frame and extension tube o Aluminum gearbox housing o Ball screw version has stainless steel extension tube Nominal stroke lengths: 4 [102mm], 6 [153mm],
More informationDA 15 T 06 BLDC 1000 DA 15 T 12 BLDC 1000
1/12 DA 15 T DA 15 T 6 BLDC 1 DA 15 T 12 BLDC 1 2/12 Content 1. General Description... 3 2. Operating Data... 4 3. Performance... 5 4. Command Signal... 6 4.1. Position Feedback Signal... 6 4.2. Default
More information30mm Diameter, Single-Turn, Wirewound Industrial Panel Controls RA30YME RA30YD RA30Y
TOCOS PANEL CONTROLS 30mm Diameter, Single-Turn, Wirewound Industrial Panel Controls RA30YME RA30YD RA30Y Features 30mm diameter, single-turn industrial panel controls Wirewound element Linear or audio
More informationSingle Phase EMI Filter PNF201 上 Series 上上上上上上上上上上上上上上上上上上上上上上上上上上上上上上上上上 AERODEV 上
Single Phase EMI Filter PNF201 上 Series 上上上上上上上上上上上上上上上上上上上上上上上上上上上上上上上上上 AERODEV 上 1 Features 上 PNF201-GF Series IEC-inlet and fuse container 上 PNF201-GFS Series IEC-inlet, switch and fuse container 上
More informationChapter 10: Valves for Pipe Mounting
Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure
More informationReplace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator
LINEAR SERVO ECONO-SLIDE Ultimate Solution for High Throughput Precision Positioning Replace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator
More informationSeries MXH/ ø6, ø10, ø16, ø20
Compact Slide Series / ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. CL MLG CNA CNG MNB CNS CLS CB CV/MVG
More informationX-LSM-E Series Datasheet
Simplifying Motion Control X-LSM-E Series Datasheet * 25, 50, 100, 150, 200 mm travel * 10 kg load capacity * Up to speed and up to 55 N thrust * Built-in controller; daisy-chains with other Zaber products
More information1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7
Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z
More informationDial Test Indicators SERIES 513
Dial Test s SERIES 513 Description of Icon Icon Description With revolution counter Long contact point Jeweled bearing Double scale spacing, easy to read Compact Dustproof Anti-magnetic FEATURES Narrow
More informationCompact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company
with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
More informationREELS. Spring & Motor Driven. For LONG CABLE or HOSE Retrieve Applications SERIES SHO SERIES TMR. Monospiral or Random Wrap Spools.
Spring & Motor Driven REELS SERIES SHO SPRING SERIES TMR MOTOR Monospiral or Random Wrap Spools For LONG CABLE or HOSE Retrieve Applications RET-d Eight Steps to Reliable Production with Gleason SHO/TMR
More informationLINEAR AND ROTARY SENSORS
LINEAR AND ROTARY SENSORS MMP WPL-OS linear HWL 60 PE rotary FIRST IN SENSORS FIRST IN SENSORS TRUST THE X! Welcome to Metallux USA, Inc. Metallux USA, Inc. is the sole distributor of products for Metallux
More informationKR15. LM Guide Miniature Actuator. KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body. CATALOG No.
LM Guide Miniature Actuator KR1 KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body US, EPC Patent pending CATALOG No.76E LM Guide Actuator KR1 Miniature LM Guide
More informationPrecision Potentiometers
Precision Potentiometers w w w. b o u r n s. c o m I. Product Selection Guide...58 II. Potentiometers Multiturn...60 Single-Turn...65 Knobpot...70 Pushbutton (Digital Readout)...7 III. Definitions & Test
More information1This is a positioning module developed for alignment stage by. 2 Height adjustment is not required.
31 31 Alignment Module Ball screw Linear / Rotation Points Flexibility of freely designing the stage according to the usage Linear Way Positioning module enabling various motions 1This is a positioning
More informationSR1V. Industrial Low Cost String Pot
SR1V Industrial Low Cost String Pot User Scalable VDC Output Signal Linear Position Measurement up to 125 inches (3 meters) Designed for Outdoor / Wet environments In-Stock! SR1V is a rugged, low-cost,
More informationDirectional Seat Valve Series D4S (Denison)
Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01)
More informationLinear Motion Technology Handbook. The Drive & Control Company
Linear Motion Technology Handbook The Drive & Control Company 1-2 Bosch Rexroth AG Linear Motion Technology Handbook R310EN 2017 (2006.07) Linear Motion and Assembly Technologies www.boschrexroth.com/brl
More informationPARTS LIST GAS TILTING SKILLETS MODELS: GLTS-30 GLTS-40
PARTS LIST GAS TILTING SKILLETS MODELS: CROWN FOOD SERVICE EQUIPMENT LTD. 70 OAKDALE ROAD, DOWNSVIEW, (TORONTO), ONTARIO, M3N 1V9 TELEPHONE: (416) 746-2358, FAX: (416) 746-8324 PRINTED IN CANADA PART NUMBER
More informationACA-20PC Series Digital, LED-Display AC Ammeters with Built-in Current Transformers
www.murata-ps.com Now Available with Wire Lead CTs FEATURES for direct measurement of 0 to 2/20/50/100 Amps Functionally complete: On-board current transformers Scaling/interface circuitry Precision A/D
More informationUltra Series: Crossed Roller Ultra Precision Stages
Ultra Series: Crossed Roller Ultra Precision Stages Bayside Motion Group, has developed Ultra Positioning Stages for applications requiring the ultimate in accuracy. Available with a linear motor, ball
More informationLIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES
SERIES 77 For use at machine or inspection area for checking inside and outside diameters, shallow bores, counter bores, pitch diameters of gears, and many other dimensions. LIGHTWEIGHT ADJUSTABLE SHALLOW
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 1" D-HANDLE ROTARY HAMMER SERIAL NUMBER G43A See page 6.
00 0 CATALOG NO. EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). = Component of the 14-4-525 522-21 Maintenance Service Kit SEE PAGE TWO FOR THE PROCEDURE ON CHECKING
More informationActuator LD3. Product Data Sheet Feature
Product Data Sheet www.moteck.com Actuator LD LD features its compact design, which is suitable for various applications that require limited installation space, such as window opener and adjustable car
More informationABS System. Inductive Digital Comparator µmaxµm. Features. Technical Data. The most valueable electronic indicator for high production measurements.
+ Millimess. Digital Comparators 6- Inductive Digital Comparator µmaxµm ABS System 0 TOL RS232C Digimatic The most valueable electronic indicator for high production measurements. Inch/Metric operator
More informationI. Product Selection Guide Specifications H-46 H-22 H-506 CT-23 CT-26 H-490. Turns
Turns-Counting Dials w w w. b o u r n s. c o m I. Product Selection Guide...131 II. Dials 46, 0-20 Turn Dials...132 22, 0-15 Turn Dials...133, 134 27, 0-10 Turn Dials...135 28, 0-10 Turn Dials...135 25.4,
More informationFDXS Series. required at temperatures below 0 C (32 F) None required, or ISO VG32. 0 ~ 5mm Standard with rubber bumper (both sides)
Bulletin FDXS-09 Features 1. Magnetic piston is standard in all sizes. 2. Non-rotating design enables precision positioning. ng. 3. Compact design saves space. 4. Suitable for multi-axis assemblies and
More informationPosition Transmitters. Instruction Manual. Established Leaders in Valve Actuation. Electric Actuators and Control Systems
Electric Actuators and Control Systems Established Leaders in Valve Actuation Position Transmitters Instruction Manual Publication P973E Issue 08/09 Instruction Manual IM-0665 Position Transmitters Where
More informationJohn Deere , 9940 Picker Bar and Spindle Assembly 30-1
www.certipik.com Certi-Pik, USA Litho in USA 2017 John Deere 9900-9920, 9940 Picker Bar and Spindle Assembly 30-1 Item Part OEMPart Qty Desc 1 93500PRM N193500 1 2.1 14682R N114682 NA 2.2 14683L N114683
More informationCatalog FGYBR-11 NEW PRODUCT. Magnetically Coupled Rodless Cylinders. FGYB & FGYR Series
Catalog FGYBR- NEW PRODUCT Magnetically Coupled Rodless Cylinders FGYB & FGYR Series Series FGYB Basic cylinder mounting See pages 6 & for dimensions and ordering information. Series FGYR Through hole
More informationFeatures. Specification. Model. Acting type. Tube I.D. (mm) Stroke (mm) 5, 10, 15 5, 10, 15, 20. Port size. Proof pressure.
MCGS series ø6, ø0 Features Multi-ports as standard enabling both direction mounting. Non-rotating accuracy ± 0. mbedding type sensors. The sensor cable will be in the same direction as the piping tube
More informationPRODUCT OVERVIEW. Our Mission:
PRODUCT OVERVIEW Material Handling Construction Agriculture Waste Management Industrial Our Mission: Brand Hydraulics Co. will conduct business with integrity and strive to exceed customer expectations
More informationLighted Pushbutton Switch
Lighted Pushbutton Switch General Purpose and Micro-Voltage/Current Load Switch Requires only 22 mm mounting depth All LEDs, lamps, legends and pushbutton units replaceable without tools Oil-resistant
More informationspectrasymbol.com Rev F3 - Page 1
Features - Linear Position Sensor - IP65 Dust Proof, Water Proof (Intense Spray) - Polyester Substrate - 3M Pressure Sensitive Adhesive (PSA) - Upon Request - Male or Female Nicomatic or Berg - Wiper of
More informationReaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
More information2Fully closed loop control is configure and the positioning. 4 Simple system configuration is available
TXM CTXM TXMCTXM 13 1 Super Precision Positioning Table TX Ball screw TX M inear Points Ball screw inear Roller Way Slide table 1 Ultimate high accuracy table of rolling guide type High precision, high
More informationPrecision Positioning Table LH
CTLH32M Precision Positioning Table LH TSLH12M/J Table with bellows 12 -M Depth 1( 1 ) 1( 1 ) 32 29 29 18 19 -M8 Depth 16 13 (3.7) (7.3) L 1( 2 ) (2.3) E S/2 13 S/2 E (2.3) 1 1 12 TSLH M CTLH M 28 7 Hole
More informationHigh-Precision, Direct-Drive Linear Servo Systems
High-Precision, Direct-Drive Linear Servo Systems (EM and LVD) pending The is a direct drive linear actuator servo system. Each complete system consists of a brushless linear servo motor, microprocessor-based
More informationElectric Actuator Controller/Driver
Slider Series LEF Electric Actuator Controller/Driver Slider /High Rigidity Series LEJ Guide Rod Slider Series LEL P.1 P.2 P.3 Slider / Low Profile Series LEM Rod Series LEY Slide Table Series LES P.4
More informationDA 15 N 06 BLDC 250 DA 15 N 12 BLDC 250
1/16 DA 15 N DA 15 N 6 BLDC 25 DA 15 N 12 BLDC 25 2/16 Content 1. General Description... 3 2. Operating Data... 4 3. Performance... 5 4. Command Signal... 7 4.1. Position Feedback Signal... 7 5. Materials
More informationpressure transducer Miniature pressure transducer model 81530
Section 8.1 8.2 8.3 High Pressure transducer model 8201 N Miniature pressure transducer model 81530 pressure transducer model 8221 Pressure Transducers 8103-8107 Pressure transducers / pressure transmitters
More informationProduct 1 Mini Linear Servo Motor
Product 1 Mini Linear Servo Motor Stroke : 30mm (50mm & 100mm versions to be released in this year) Force : 20~100N (varies depending on gear ratio.) Position Control (Positional Accuracy 100um) Protocol
More informationPC4G20BU. PC Printed Circuit Terminals
PC4G20BU PC Printed Circuit Terminals W Y X L A S E Mounting Height Mounting Diameter Spindle Diameter Spindle Length Initial Termination Wiper (or moving contact) termination End Termination Prefix (Potentiometer
More informationACA-20PC Series Digital, LED-Display AC Ammeters with Built-in Current Transformers
www.murata-ps.com Now Available with Wire Lead CTs C US E156931 FEATURES for direct measurement of 0 to 2/20/50/100 Amps Functionally complete: On-board current transformers Scaling/interface circuitry
More informationFEEDMAX W/ SHUTTLE IJ SERIES. Parts Manual
FEEDMAX W/ SHUTTLE IJ SERIES Parts Manual TABLE OF CONTENTS FEEDMAX SYSTEM FEEDMAX CONVEYOR (FIG. 1)....3 FRAME ASSEMBLY (FIG. 2).. 5 ADJUSTABLE PULLEY ASSEMBLY (FIG. 3)..7 DRIVE ASSEMBLY (FIG. 4)....9
More informationUltrasonic Sensor U-B
MAINTAIN CONSTANT TENSION - The ultrasonic sensor is used to maintain constant tension when using a brake for producing unwind (payout) tension, or when using a clutch for rewind tension. The sensor measures
More informationmm Square Sealed Panel Control
*RoHS COMPLIANT Features Conductive plastic PC board and bushing mount Plastic or metal bushing and plastic shaft Withstands typical industrial washing processes Compact package saves board and panel space
More informationSeries ADR. Double Rod Cylinder W1H ADR M Bore Size : ф10, ф16, ф20, ф25. How to Order A ACP UACP AM2 AM AL ALX ARD AQ2 AGX GX ADM ADR
Double Rod Cylinder Bore Size : ф10, ф16, ф, ф25 HIGH ATERA OAD CAPABIITY ADJUSTABE STROKE IS AVAIABE A THIN AND COMPACT DOUBE ROD CYINDER BA BUSHING OPTION AUTO SWITCH READY NON-UBE SERVICE STAND. A 2
More informationDrop Feeder Control. Part Number Introduction. Setting the Control. Time Clock operation. Manual Operation
Part Number 28999 Introduction The 28999 Drop Feeder Control is designed to be used with a Chore-Time Drop Feeding System and Chore- Time Flex-Auger System. The control will automatically open the Drop
More informationTH23 POWER HOOK Spare Parts Manual
TH23 POWER HOOK Spare Parts Manual For spares and service support & the latest service network listings refer to www.edbro.com Spares Tel: +44 (0) 120 4902319 Spares fax: +44 (0) 120 4393561 Service Tel:
More informationPNEUMATIC LINEAR ACTUATORS SECTION 1
PNEUMATIC LINEAR ACTUATORS SECTION 1 1-888-638-6337 Typical Applications: Larger versions of these examples are available on the CD-ROM version of our catalog or on our web site: www.meto-fer.com Subject
More informationParallel long travel pneumatic gripper
Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated
More information24P Installation and Operations Manual
24P Installation and Operations Manual P/N 24P01A1A P/N 24P02A1A ler with integral potentiometer ler with cable for remote potentiometer 24P00M1H 5/15/2015 This instruction manual covers the 24P01A1A Proportional
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
More informationUser's Manual O
11/3/99 3535.ai User's Manual 3535 3535 O Step Motor Drivers Copyright 1998 Applied Motion Products, Inc. 404 Westridge Drive Watsonville, CA 95076 Tel (831) 761-6555 (800) 525-1609 Fax (831) 761-6544
More informationBall Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
More informationAPPARATUS AND MATERIAL REQUIRED Resistor, ammeter, (0-1.5A) voltmeter (0-5V ), battery, one way key, rheostat, sand paper, connecting wires.
ACTIVITIES ACTIVITY 1 AIM To assemble the components of a given electrical circuit. APPARATUS AND MATERIAL REQUIRED Resistor, ammeter, (0-1.5A) voltmeter (0-5V ), battery, one way key, rheostat, sand paper,
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HALF SIZE GAS CONVECTION OVENS ML-114573 ML-114575 HGC20 HGC20D A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 33717 Rev. A (April 2013) F-33717 Rev. A
More informationProtection Equipment. 5/2 Introduction
Protection Equipment /2 Introduction SIRIUS 3RV2 Motor Starter Protectors/ Circuit Breakers up to 40 A /6 General data /12 For motor protection /14 For motor protection with overload relay function /1
More informationWadi Mai Item Description Status UOM Quantity
Wadi Mai Item Description Status UOM Quantity 10281 BEARING New NOS 2.00 10884 SWITCH DIMMER ASSY New NOS 1.00 12451 AIR FILTER New NOS 1.00 12452 FILTER SUCTION New NOS 2.00 12454 V-BELT New NOS 4.00
More information