Rotary Potentiometer. 1/2 Watt, Composition. Electrocomponents. Industrial 24mm Diameter. Rotary Potentiometer. Features
|
|
|
- Alexia Horn
- 5 years ago
- Views:
Transcription
1 Electrocomponents Series 450 Data Sheet Rotary Potentiometer Industrial 4 Diameter 1/ Watt, Composition Rotary Potentiometer Features - Bushing - Twist or Bend Tab - Snap-in PC Bracket - PC Terminal Electrical and Mechanical Specifications Resistance Range 100 ohms through 10 Megohms, linear 1K ohms through 1 Megohms, audio Resistance Tolerance ±30%, ±0%, ±10% Rotational Torque Standard: gf-cm (Consult CTS for special torque) Stop Strength kgf-cm minimum Power Rating 1/ 55 C (Resistance up to 100K ohms) 1/3 55 C (Resistance above 100K ohms) Dielectric Strength 1080 VAC for 1 minute Maximum Operating Voltage 750 VDC Insulation Resistance 100 Megohms 50 VDC Angle of Rotation Total Rotation (Potentiometer and Switch) With rotary switch: 30 Without switch or with push switch: 300 Electrical Effective Angle (Potentiometer) 300 Push-Pull Strength of Shaft 10 kg for 10 seconds Rotational Life Standard: 10K cycles Special: 100K, 50K cycles Operating Temperature -10 C to +80 C Solder Heat Resistance 60 C for 5 seconds Mounting Information - Bushing - Twist Tab - Bend Tab - Snap-in PC Bracket - PC Terminal CTS Corporation. All rights reserved. Information subject to change. 04/9/15
2 OPTIONAL POWER SWITCHES Contact Series Arrangement Electrical Rating Outline Drawing FR-GC SPST 3 15 volts, Rotary 1 50 volts AC UL Recognized GC SPST 5 0 volts DC Rotary (Automotive) Actuating Angle 0 Actuating Torque 7 to 17 in. oz. (504 to 15 gf-cm) HOLES.39/.094x3.18/ Ø TGC SPST 6 15 volts AC Rotary UL & CSA Recognized Actuating Angle 0 Actuating Torque 7 to 17 in. oz. (504 to 15 gf-cm) HOLES.39/.094x3.18/ Ø TV-03 SPST TV-5 rating Rotary UL & CSA Recognized Actuating Angle 0 Actuating Torque 10 to 0 in. oz. (70 to 1441 gf-cm) Ø HOLES.39/.094x3.18/ CTS Corporation. All rights reserved. Information subject to change. 04/9/15
3 OPTIONAL POWER SWITCHES Contact Series Arrangement Electrical Ratin g Outline Drawing 040 SPST 6 15 volts AC Push-on Push-off Pre-travel 13/64 (5. ) Activating Force: to 5 lb (0.9 to.3 kg) Ø Ø HOLES-1.93/.076x3.15/ SPDT 6 15 volts AC Push-on Push-off Pre-travel 13/64 (5.) Activating Force: to 5 lb (0.9 to.3 kgf) Ø Ø HOLES-1.93/.076x3.15/ SPST 3 15 volts AC Rotary (Shallow construction switch) UL & CSA Recognized volts DC (Automotive) Actuating Angle: 5 Actuating Torque: to 15 in. oz. (144 to 1080 gf-cm) Ø FR-07 DPST 3 15 volts, Rotary 1 50 volts AC UL Recognized Actuating Angle: 0 Actuating Torque: 10 to 0 in. oz. (70 to 1441 gf-cm) POLE # Ø POLE # HOLES.39/.094 x 3.18/ CTS Corporation. All rights reserved. Information subject to change. 04/9/15
4 OPTIONAL POWER SWITCHES Contact Series Arrangement Electrical Ratin g Outline Drawing TV-00 Actuating Angle DPST Rotary Actuating Torque 10 to 0 in. oz. (70 to 1440 gf-cm) 15 volts AC Pole #1, TV-1 rating Pole #, TV-3 rating UL & CSA Recognized POLE #1 Ø POLE # HOLES.39/.094x3.18/.15 FR-0 8 SPDT 3 15 volts AC Rotary UL Recognized Actuating Angle Actuating Torque 10 to 0 in. oz. (70 to 1440 gf-cm) POLE #1 Ø POLE # HOLES.39/.094x3.18/.15 TV-01 SPDT TV-4 rating Rotary UL Recognized Actuating Angle Actuating Torque 10 to 0 in. oz. (70 to 1440 gf-cm) Ø POLE # POLE #1 HOLES.39/.094x3.18/.15 FR-K SPST 3 15 volts AC Pull-on Push-off UL & CSA Recognized Pre-travel 5/3 (3.97) Actuating force 7 to 16 oz. - Single section control (198 to 454 gf) 7 to 0 oz. - Tandem control (198 to 567 gf) HOLES.39/.094 X 3.18/ CTS Corporation. All rights reserved. Information subject to change. 04/9/15
5 450T Metal Shaft, Bushing Mou, Type "T" Solder Lug Terminals 0.4 "A"± "L"± ± ±.003 Ø3.8 3.± ± MAX..06± ±.003 3/8-3NEF 1.7 MAX C 450X / 450Y Metal Shaft, Bushing Mount, Printed Circuit Type "X" Or "Y" Terminals LOC. LUG ABOVE MOUNTING SUR FACE 3/8-3 UNEF- A THRD Ø3.8 A "L" 3.± ± X= Y= X= Y= C.08Ø (3) HOLES.08 ±0.05 PANEL PIERCING GEN. TOL. ± U Metal Shaft, Bushing Mount, Printed Circuit Type "U" Termina ls "L" A.08± ± ± ± ±0.08 Ø /8-3 UNEF- A THRD. 3.± ± ± ±.00 C 5.97± ± ±.00.35±.00.08± ±.00 DIA. 3 HOLES CTS Corporation. All rights reserved. Information subject to change. 04/9/15
6 450V Metal Shaft, Bushing Mount, Printed Circuit Type V Terminals A "L".08± ± ± ± ±0.08 Ø /8-3 UNEF- A THRD. 3.± ± ± ±.00 C 5.97± ± ±.00.35±.00.08± ±.00 DIA. 3 HOLES T-450 Dual-section, Metal Shaft, Bushing Moun t, Type T Solder Lug Terminals (R)..874 (P).08± ±.003 Ø3.8 3.± ± ± ±.003 3/8-3 UNEF- A THRD. C "A" L * Consult CTS for its part no. or availability of more sections CTS Corporation. All rights reserved. Information subject to change. 04/9/15
7 TC-450 Dual-section, Concentric Metal Shafts, Bushing Mount, Type T Solder Lug Terminals /8-3 UNEF- A THRD..08± ±.003 Ø3.8 "A" l L 3.± ± ±.003 C ± * Consult CTS for its part no., or availability of more sections 040-TMG450 Metal Shaft, Bushing Mount with Insulated Plate, Type T So lder Lug Terminals, 040 Switch MOUNTING SUR FACE ±0.05 0± ± ±.00 Ø3.8 3/8-3 UNEF- A THRD CLEARANCE FOR BUSHING Ø3.58 Ø.141 () HOLES TRAVEL C * Refer to page 3 for switch details MAX "L" TMG450 Metal Shaft, Bushing Mount with Insulated Plate, Type T So lder Lug Terminals, 041 Switch MOUNTING SUR FACE ±0.05 0± ± ±.00 Ø3.8 3/8-3 UNEF- A THRD CLEARANCE FOR BUSHING Ø3.58 Ø.141 () HOLES TRAVEL C MAX * Refer to page 3 for 041 switch detail "L" CTS Corporation. All rights reserved. Information subject to change. 04/9/15
8 050-T450 Metal Shaft, Bushing Mount, Solder Lug terminals, 050 Switch 1.5 (4) A MOUNTING SURFACE L * Refer to Ordering Information for switch details.08± ±.003 Ø ± ± ± ±.005 Ø () MAX 3/8-3 UNEF- A THRD C * Refer to page 3 for 050 switch detail TGC-TMG450 Metal Shaft, Bushing Mount with Insulated Plate, Type T Solder Lug Terminals, TGC Switch HOLES.4 x x MOUNTING SURFACE "L".08± ±.003 Ø3.8 Ø ± ± C 3/8-3 UNEF-A THRD * Refer to page for TGC switch detail Shaft Trim Options TEETH CTS Corporation. All rights reserved. Information subject to change. 04/9/15
Series 270. Commercial Miniature 5/8" (16mm) Diameter Composition Variable Resistors. Electrical and Mechanical Specifications.
Series 270 Commercial Miniature 5/8" (16mm) Diameter Composition Variable Resistors Miniature 5/8" (16mm) size Versatile mounting styles: bushing twist tab bend tab snap-in PC bracket solder lug or PC
30mm Diameter, Single-Turn, Wirewound Industrial Panel Controls RA30YME RA30YD RA30Y
TOCOS PANEL CONTROLS 30mm Diameter, Single-Turn, Wirewound Industrial Panel Controls RA30YME RA30YD RA30Y Features 30mm diameter, single-turn industrial panel controls Wirewound element Linear or audio
Features Metal shaft and bushing Consistent, smooth quality feel Up to 4 sections available Rotary switch option designed for on-off function control
*RoHS COMPLIANT VERSIONS AVAILABLE Features Metal shaft and bushing Consistent, smooth quality feel Up to sections available Rotary switch option designed for on-off function control RoHS compliant versions
24mm Diameter, Single-Turn, Carbon Industrial Panel Controls
TOCOS PANEL CONTROLS 24mm Diameter, Single-Turn, Carbon Industrial Panel Controls RV24YN RV24YGME RVT24YN Features 24mm diameter, single-turn industrial panel controls Carbon film element Linear or audio
Series 308 Electrical Specifications
Series 38 Potentiometer 1/2 in. sq..5 Watt Series 39 Potentiometer 1/2 in. sq. 1. Watt Description The Series 38 and 39 are high-performance, low-cost potentiometers. They are also available with S.P.S.T.
Single Turn Rotary Wirewound Potentiometers
Single Turn Rotary Wirewound Potentiometers THE POTENTIOMETER SPEILISTS QD & QDD Series 1.328" Diameter, 3 watts, Single or Dual Module... pg. 2 Suggested replacement for Honeywell R20 and 43-Series QE
Security Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter
Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless
Emergency Stop Switch A165E. Ordering Information. Mounting Aperture of 16 mm
Emergency Stop Switch Mounting Aperture of 16 mm Modular construction, easy installation Positive opening mechanism with minimum contact separation of 3 mm in accordance with EN60947-5-1, Conforms to EN418
Series R19. Power Rocker Switches MARK OPTIONS COLOR OPTIONS TERMINATION OPTIONS HOW TO ORDER
CONTACT RATING: 6A 250VAC 10A 125VAC. ELECTRICAL LIFE: 10,000 Operations. MECHANICAL LIFE: 50,000 Operations. CONTACT RESISTANCE: 1,000M-ohms. DIELECTRIC STRENGTHS: >1,500
OW20BU/B4PC1S OW20BU/N4PC1S-CH *
OW20BU/B4PC1S OW20BU/N4PC1S-CH * B4OW1S N4PC1S 4 Amp Single Pole Switch CH Change Over (Double Throw) OW Ordinary Wiring (recommended for soldering) PC For Printed Circuit * Representative of range: Switch
mm Square Sealed Panel Control
*RoHS COMPLIANT Features Conductive plastic PC board and bushing mount Plastic or metal bushing and plastic shaft Withstands typical industrial washing processes Compact package saves board and panel space
PD-Series Ground Fault Circuit Protection
PD-Series Ground Fault Circuit Protection SmartGuard is an equipment ground fault protection device that functions as a standard high-quality Carling hydraulic/ magnetic circuit breaker, offering customized
Power PCB Relay. Type Contact material Contact form Construction Part number General purpose AgCdO SPDT Semi-sealed G2R-1
Power PCB Relay Creepage distance of 8.0 mm (0.31 in) min. between coil and contact Dual-winding latching type available Plug-in and quick-connect terminals available High sensitivity (360 mw) and high
MS-Series. Circuit Breaker
MS-Series Circuit Breaker Carling Technologies MS-Series Sealed Toggle Circuit Breaker was designed and tested to operate flawlessly in the harshest of environments. Ideally suited for COTS (commercial
Series 206/208 Through-Hole DIP Switch
Available with SPST, SPDT, DPST, 3PST circuitry choices Available with low profile, standard, or extended actuator heights. Consult the ordering information for options. RoHS compliant Optional top tape
Series S127B Potentiometer 1/2" (12.7mm) Square
Series S17 Potentiometer 1/" (1.7mm) Square Features: Stackable - up to modules onductive Plastic or ermet Resistance lement Linear, W or audio Taper Metal Shaft and ushing Description: The Series S17
G-Series. Circuit Breaker.
-Series Circuit Breaker Carling Technologies -Series hydraulic/magnetic circuit breakers offer the highest quality solution to your circuit protection requirements. The -Series is designed to sense over-current
Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
EMO-21. Specifications. Elcom International Pvt. Ltd. Approvals: Screw mounting IEC outlet. Terminals: 6.3 mm Quick Disconnect Tabs.
EMO-21 Screw mounting IEC outlet Mounting Style: Panel, Screw-type Terminals: 6.3 mm Quick Disconnect Tabs. Reference Standard: IEC 60320, UL-498 Permissible Temp With/Without Load: 0 deg. C to + 70 deg.
F-Series. Circuit Breaker
F-Series Circuit Breaker The F-Series hydraulic/magnetic high amperage circuit breakers are designed to handle high current applications in extremely hot and/or cold locations. Due to its timeproven hydraulic/magnetic
PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS Reed Switches and Proximity Sensors 1 REED SWITCHES HIGH POWER 7 UNIVERSAL HIGH POWER & HIGH VOLTAGE 7 Form A Form C Form C Form A Form C 196W 134W 156W 634W 637W 907W 834W 933W
F-Series. Circuit Breaker
F-Series Circuit Breaker The F-Series hydraulic/magnetic high amperage circuit breakers are designed to handle high current applications in extremely hot and/or cold locations. Due to its timeproven hydraulic/magnetic
9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
Single Pole Circuit Protectors 55. Multi-Pole Circuit Protectors 56. Configurations 58. Operating Characteristics 59.
Single Pole Circuit Protectors 55 Multi-Pole Circuit Protectors 56 Configurations 58 Operating Characteristics 59 Delay Curves 60 Specifications 61 Decision Tables 62 SINGLE POLE CIRCUIT PROTECTORS The
XA16ECO/B1PC1S XA16ECO/B4PC1S
XA16ECO/B1PC1S XA16ECO/B4PC1S B4PC1S B1PC1S - 14 1 Amp Single Pole (Single Throw) Switch XA Terminals Bent Extra Long Toward Switch PC Printed Circuit Terminals This image shows the XA terminals located
AP/UP, AP/MIL Series Magnetic Circuit Protectors
AP/UP, AP/MIL AP/UP, AP/MIL Series Magnetic Circuit Protectors Introduction 68 Single Pole 69 Multi-Pole 70 Configurations 72 Operating Characteristics 73 Delay Curves 74 Specifications 75 Decision Tables
8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
Lighted Pushbutton Switch
Lighted Pushbutton Switch General Purpose and Micro-Voltage/Current Load Switch Requires only 22 mm mounting depth All LEDs, lamps, legends and pushbutton units replaceable without tools Oil-resistant
Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
48 Series - Contactor Relay 4PST - N.O. - Double Make, 15 Amp
48 Series - Contactor Relay 4PST - N.O. - Double Make, 15 Amp E13224 The 48 series is a contactor with a 4 normally open, double make contacts rated up to 3HP. It uses a solenoid type moving core design
5 Series - Mechanical Latch 2PDT - 4PST, 30 Amps
5 Series - Mechanical Latch 2PDT - 4PST, 30 Amps The 5 series is a 2 coil mechanical latch electrical reset power relay. It is panel mounted with screw terminals, and has 600 volt spacing. The 5 series
ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
Distinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
AC 250V AC 250V AC 250V AC 250V DC 110V DC 110V DC 110V DC 110V Max. Allowable Current 15A 10A 10A 10A
Main Feature 1. 1 Pole to 4-Poles versions available with switching current at 15A (1 Pole) and 10A (2-4 Poles). 2. Printed Circuit Board Terminal, Plug-in Terminal and Flanged Case are designed for easy
mm Square Sealed Panel Control
*RoHS COMPLIANT Features n Conductive plastic n PC board and bushing mount n Plastic or metal bushing and plastic shaft n Withstands typical industrial washing processes n Compact package saves board and
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
PCB Relay. Contact form Terminals Coil terminals Rated voltage Model SPST-NO #250 tab terminals PCB terminals 5, 12, 24 VDC G4A-1A
PCB Relay Miniature Single-pole Relay with 80-A Surge Current and 20-A Switching Current Ideal for motor switching. Miniature, relay with high switching capacity built-in applications. Creepage distance
ELUMILED.COM. Model 91, 92, 93, 94 & 95-5/8 Square Single-Turn Panel Control
*ohs COMPLIANT VESIONS AVAILABLE Features Available in a variety of pin-out configurations Virtually infinite electrical circuit isolation Metal or plastic shaft options ohs compliant versions available*
n Available in a variety of pin-out configurations
*ohs COMPLIANT Features n Available in a variety of pin-out configurations n Virtually infinite electrical circuit isolation n Metal or plastic shaft options n ohs compliant* Model 91, 9, 93, 94 & 95-5/8
POTENTIOMETERS ENCODERS & CODED SWITCHES TP/RH7& TP/RH9.
POTENTIOMETERS ENCODERS & CODED SWITCHES TP/RH7& TP/RH9 www.tocos.com We are TOCOS TOCOS America, Inc. is a wholly owned subsidiary of Tokyo Cosmos Electric Co., Ltd. ( TOCOS), a worldwide supplier of
A165-E. Ordering Information. Emergency Stop Switch. For Panel Cutout of 16 mm
Emergency Stop Switch For Panel Cutout of 16 mm H Modular construction, easy installation H Positive opening mechanism with a minimum contact separation of 3 mm in accordance with EN6947-5-1, for NC contacts
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer FEATURES Robust construction High rotational life (50 000 cycles) Up to three sections PC support plates Rotary switches and solder lugs terminals
General Purpose Relay
General Purpose Relay Arc barrier equipped High dielectric strength (2,000 VAC) Long dependable service life assured by AgCdO contacts Choose models with single or bifurcated contacts, LED indicator, diode
SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 0 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle mechanical life endurance up to 1 million switching cycles Wide variety Variants with IP 67 or dust protection insert Two
S E C Q - E - S T 1-2. Cap/ Sealing Hood (STD) 8.89 B solder lug Q (none) (none) Rubber Hood
T 8 0 1 3 - S E C Q - E - S 2 0 - T 1-2 Switch Function (SPDT) Actuator Bushing Termination Contact Switching Position Model No. S 10.41 E Epoxy Seal Vertical Support Bracket Cap/ Sealing Hood (STD) 8.89
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometers
, /" 7 mm Conductive Plastic and Cermet FEATURES Robust construction High rotational life cycles Up to three sections PC support plates Rotary switches and solder lugs terminals available Compliant to
Load Resistive load (p.f. = 1) Inductive load (p.f. = 0.40, L/R = 7 ms) Rated load 5 A at 250 VAC, 30 VDC 2 A at 250 VAC, 30 VDC
Power PCB Relay G6D-ASI Reduced board space ideal for high-density mounting (45% smaller than the surface area of G6B). Slim package: measures 6.5 W x 17.5 L x 12.5 H mm Switches loads up to 5 A, 250 VAC/30
Control Relays Overview
Control Relays Overview DESIGN FEATURES Among the advances Agastat Control Relays offer over existing designs is a unique contact operating mechanism. An articulated arm assembly amplifies the movement
table of contents Switches J 1 SECTION SECTION J Quick Guide to Switches... J2-J3
table of contents Switches Quick Guide to Switches....................................... J2-J3 Push Switches.............................................. J4-J7 Single Pole ON-OFF.......................................
or 0.5Ω whichever is greater (152 only) Temperature Coefficient of Resistance MODEL 152 MODEL 159 Refer to standard
Model 152, 159 FEATURES Rugged, High-Quality, All Metal Housing Short Length Behind Panel (11/32 ) Choice of Two Elements for Broad Resistance Range- 5Ω to 2MΩ No Glued Joints Extra Taps AVAILABLE High
DIM. A (+ 0,05 0,51) .437 ±.020 (11,10 ± 0,51) DIM. F ±.015 (0,38) INTEGRAL ASSEMBLY NUT, DO NOT REMOVE
Multi-Deck SERIES,, and " Diameter, Amp, Standard, Military SR0 FEATURES Rugged Construction Insures Switch Operation for the Life of Your Equipment Many Circuitry Options MIL Qualified Versions MIL-S-/0
D2SW-AQ. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend
Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal ) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive
Series AV. Pushbutton Switches NUT O-RING HOW TO ORDER
Pushbutton Switches SPECIFICATIS: BUSHING: 22mm. CTACT RATING: 2A @ 48VDC or 125VAC. ELECTRICAL LIFE: 10,000cycles at full load. CTACT RESISTANCE: 10m-ohms max. initial @2-4VDC. INSULATI RESISTANCE: 1,000M-ohms
Ordering Information. Text PCB Power Relay G5LE
A Cubic, Single-pole 10-A Power Relay Single-pole 10A 35VDC, 0.8mm contact gap: G5LE-G Single-pole 16A 250VAC: G5LE-E ROHS compliant. Sub-miniature sugar cube relay with universal terminal footprint. Conforms
Data Sheet for Precision Potentiometer
The RP22/23 potentiometers in 22 mm metal housing are suitable for applications where a accurate and compact sensor with high electrically effective rotation angle is required. Accurate wirewound potentiometer
BENEFITS 782 STANDARD PART NUMBERS FEATURES 782 XDX M4L- 120A ORDERING CODE DPDT 10 AMP & 4PDT 3 & 5 AMP MINIATURE POWER RELAY FLAG INDICATOR:
SERIES 782XBX/XDX DPDT 10 AMP & 4PDT 3 & 5 AMP MINIATURE POWER RELAY FEATURES FLAG INDICATOR: L.E.D. STATUS LAMP: PUSH BUTTON: LOCK-DOWN DOOR: FINGER-GRIP COVER: I.D. TAG/WRITE LABEL: COVER ADAPTERS: BENEFITS
TP Series, Tiny. Features. Pushbutton Switches. Pushbutton Switches
TP Series, Tiny Features Compact design Round or rectangular actuator buttons. Vertical or versions Typical performance characteristics Contact configuration........................ SPST, SPDT, DPDT Contact
37T Series Moisture Resistant Temperature Controls
37T Series Moisture Resistant Temperature Controls Moisture Resistant Temperature Control The 37T series of 3/4 (19mm) bimetal disc temperature controls from Therm-O-Disc offers proven reliability in a
C&K DA Series Miniature Single Pole Rocker Switches
Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants ON REQUEST Other
onlinecomponents.com
McGILL SWITCHES Contents Introduction......................................................................... 213 McGill Rocker Switches................................................................
Subminiature Basic Switch
Subminiature Basic Switch Subminiature Basic Switch Offers Long Life and High Reliability A design that combines simplicity and stability by the use of two split springs ensures a long durability of 30,000,000
General Specifications
Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications High Inrush 0 & 6 Amp Rockers Electrical Capacity (Resistive Load) Power Level: 0A @ 5/50V AC for
AP/UP, AP/MIL Series Magnetic Circuit Protectors
AP/UP, AP/MIL AP/UP, AP/MIL Series Magnetic Circuit Protectors Introduction 77 Single Pole 78 Multi-Pole 79 Configurations 8 Operating Characteristics 82 Delay Curves 83 Specifications 84 Decision Tables
Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
ST SERIES - MINIATURE TOGGLE SWITCHES
ST SERIES - MINIATURE TOGGLE SWITCHES K FEATURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted
8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
G7S. Ordering Information. Plug-In Safety Relay. Safety Relay for Machine Control Conforms to EN Standard. H Suitable for safety circuits in press
Plug-In Safety Relay Safety Relay for Machine Control Conforms to EN Standard H Suitable for safety circuits in press machinery, machine tools, and other production machinery Do Not Remove H CE mark (conforms
Miniature Switches & Pilot Devices
A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and
POSITION TRANSMITTERS
POSITION TRANSMITTERS GENERAL DESCRIPTION Jordan Control s Series of position transmitters are rugged, compact industrial components that couple a precision feedback component and/or limit switches to
18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
Series WP. Pushbutton Switches HOW TO ORDER. Toggle Rocker Slide Pushbutton AV Rotary Tact Touch Key Miscellaneous
RATING: AC125V 7A, AC250V 4A. CIRCUIT: DPDT. CONTACT RESISTANCE: 20m-ohms max. @ 5VDC 1A. DIELECTRIC STRENGTH: AC 1,500V for 1 min. LIFE EXPECTANCY: 6-10 cycle / min. ELECTRICAL LIFE: 6,000 cycle. OPERATING
H-Series. Circuit Breaker.
-Series Circuit Breaker The -Series hydraulic/magnetic circuit breaker provides dependable circuit protection in a low cost, compact package. By meeting the IEC spacing requirements, the -Series is the
Mounting type Contact form PCB terminals Screw terminals Quick-connect terminals
Power Relay A High-capacity, High-dielectric-strength, Multi-pole Relay Used Like a Contactor Miniature hinge for maximum switching power for motor loads as well as resistive and inductive loads. No contact
Series 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
Model Number Structure
Power Relay G7J Electromechanical Relays A High-capacity, High-dielectric-strength, Multi-pole Relay Used Like a Contactor Miniature hinge for maximum switching power for motor loads as well as resistive
1200 series. Momentary pushbutton switches - round plunger. Distinctive features and specifications. Butt action contacts, double break
Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts
RoHS. Specifications. Part Number Configurator
Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 48VDC Electrical Life: 50,000 Cycles Contact Resistance: 50mΩ Max. Insulation Resistance:
30C30 definite purpose contactor
30C 30FLA Definite Purpose Contactor Robust 1-4 Pole Contactor Arc Covers as standard Industry Standard Mounting RoHS Compliant UL File No: E61703 Contact Data Table 1 Arrangements: 1 Form X (SPST-NO-DM)
Safety Relay Unit. Ordering Information. Ideal for Safety Door and Emergency Stop Switch Circuits for Machines in European Countries
Safety Relay Unit Ideal for Safety Door and Emergency Stop Switch Circuits for Machines in European Countries Two-pole slim models that are only 22.5 mm wide, three-pole models that are only 68 mm wide,
General Specifications
Series JW High Inrush 0 & 6 Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical
2006 Series Geared Rotary Limit Switches
SUPERIOR DESIGN AND OPERATING FEATURES Quality parts make each Geared Rotary Limit Switch highly dependable. The limit switch s ½" input shaft is connected to a worm gear. Adjustable self-lubricating nylon
G Series Instrument Grade Miniature Slide Switches
SPCIFICATIONS Contact ratings: Gold; 0.4 Volt-Amps (VA) max. at 20 V max. (AC or DC) Silver; 4 A at 125 VAC,2 A at 250 VAC or 3 A at 30 VDC Initial contact resistance: 10 milliohms max. Insulation resistance:
Product Range. Keylock Switches. Keylock Switches. Keylock Switches
Product Range Medium Security : 2SWK, SKF Series High Security : SWK Series Main features: SPST type - 5 disc tumbler versions SPST type - 8 disc tumbler versions DPDT type - 4 disc tumbler versions All
Series 70 Custom Potentiometer Designer Guide
Series 70 Custom Potentiometer Designer Guide.05 [0.8mm] /8 [.8mm].50 [6.5mm].055 [.7mm] 6 ROUTE 0, STE 6 EST HNOVER NEW JERSEY 0796 Phone Internet POT PROTOTYPES PRONTO! Dual Potentiometer, Dual Rotary
300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES
FEATURES Dry circuit through power ratings. ompact size SPST momentary and alternate action models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted and unlighted. SPEIFIATIONS
KX Series Precision Sine Switches
Precision Sine Switches FEATURES Hermetic seal provides exceptional operational freedom from environmental conditions Compactly designed to fit small, narrow spaces Available with either screw or solder
IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS
Current Switches and Transducers
Current Switches and Transducers Models CT-800,-805, -810, -815, -820, -825, -830 and CU-850, -855, -860, -865, -870, -875, -880, and -885 Easy to install... Small size, built-in mounting flanges, and
T he Cole Series S3900 miniature P.C. termination rotary switch
S3900 series T he Cole Series S3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,
2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview
Overview 6 SERIES Electrical functions Frame type 1 ON - OFF 4 ON ON ON MOM - ON 6 ON - ON 7 MOM OFF MOM 8 ON OFF MOM 9 ON OFF ON double pole only LH LP Plain With protection guard Number of poles Special
2000 Series Geared Rotary Limit Switches
SUPERIOR DESIGN AND OPERATING FEATURES Quality parts make each Geared Rotary Limit Switch highly dependable. The limit switch s ½ input shaft drives a bronze gear which rotates the cam block. The cam block
Momentary pushbutton switches - round plunger
1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max.
Limit Switches E47 Precision Switches
1 PG.0C.0.T.E July 0 E47 Precision The Cost-Effective Solution for Highly Accurate Switching Applications Contents Overview...................... 1 Model Selection, Basic Switches................ 2 Model
C&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
Coil Data Nominal Current MA Nominal VA Sealed Single Pole Normally Open (SPNO) White Rodgers Q
14/03/08 A136 Relay - General Purpose 90-293Q Enclosed fan relays used for switching single or two speed fan motors, solenoids, relays, resistive loads, heating and cooling applications and general purpose