Series S127B Potentiometer 1/2" (12.7mm) Square
|
|
- Iris Sharp
- 5 years ago
- Views:
Transcription
1 Series S17 Potentiometer 1/" (1.7mm) Square Features: Stackable - up to modules onductive Plastic or ermet Resistance lement Linear, W or audio Taper Metal Shaft and ushing Description: The Series S17 modules are 1/" square (1.7mm), with metal shaft and bushing. ombine up to modules: One or two potentiometer modules, or a single potentiometer module with a rotary SPDT Switch or a DPDT Push- Pull switch module. For more information about this product, visit our website at: lectrical Specifications Resistance Range 500 to 500K ohms, Linear and Logarithmic taper Total Resistance Tolerance ±10% Standard (±5% or ±0% Optional) Independent Linearity: ±5 % bsolute Minimum Resistance: ohms maximum ffective lectrical ngle: 70 ±5 (Rotary switch unit is 40 ±5 ) ontact Resistance Variation: % Dielectric Withstanding Voltage (MIL-STD-0 - Method 301) Sea Level: 1,500 V minimum 70,000 feet: 500 V minimum Insulation Resistance: 1,000 megohms minimum Power Rating t 70 (Derate To 0 t 15 ) (Voltage Limited y Power Dissipation or 350 V, Whichever Is Less) onductive Plastic Linear Taper watt ermet Linear Taper watt onductive Plastic udio Taper watt ermet udio Taper- 0.5 watt Theoretical Resolution: ssentially infinite P or Solder Lug Terminals Rotary Switch module - SPDT, 30Vdc Push-Pull Switch module - DPDT, 30Vdc Detents - enter Detent option ntire Unit: IP64; Shaft & ushing: IP65 RoHS ompliant Mechanical Specifications Total Mechanical Travel: 90 ±5 Stop Strength: Potentiometer, Rotary Module: 56 N-cm (5 lb.-in.) Push-Pull Module: 39.5 N-cm (3.5 lb.-in.) Starting Torque, Maximum: Dual Section: 0.35 N-cm (0.5 oz.-in.) Push-Pull: 0. to 1.3 N-cm (0.5 to.0 oz.-in.) Rotary: 0. to 1.3 N-cm (0.5 to.0 oz.-in.) Running Torque, Maximum: Single Section: 0.15 to 1.4 N-cm (0. to.0 oz.-in.) Dual Section: N-cm (+0.5 oz.-in.) Detent (Single Section): 1.94 N-cm (.75 oz.-in.) min. Mounting (Torque on ushing): 1.7 to.0 N-m (15 to 18 lb.-in.) maximum Weight: Single Section: 5.5 grams dditional Section: 3.0 grams Push-Pull: 10 grams Rotary: 8.5 grams Terminals: Pot only or Push-Pull: P pin or solder lug Rotary: P pin Soldering ondition: Recommended hand soldering using Sn95/g5 no clean solder, 0.05 wire diameter. Page 1 TH POTNTIOMTR SPILISTS
2 Mechanical Specifications (continued) Maximum temperature: 399 (750 F) for 3 seconds. No wash process to be used with no clean flux. Part can be wave soldered at 60 (500 F) for 5 seconds, no wash process with no clean flux. Marking: Manufacturer s trademark, part number, resistance value and date code. Ganging (Multiple Potentiometer Sections): sections maximum (dditional sections available on special request with higher minimum order quantities) Multiple Potentiometer sections plus switch: Inquire for availability, minimum order quantity and price. Hardware: One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number. nvironmental Specifications Operating Temperature Range: +1 to +15 Storage Temperature Range: -55 to +15 Temperature oefficient over -55 to +15 Range: onductive Plastic: ±1,000 ppm/ ; ermet: ±150 ppm/ Vibration (Single Section) 15 G Total Resistance Shift: ±% maximum Voltage Ratio Shift: ±5% maximum Shock (Single Section) 30 G Total Resistance Shift: ± % maximum Voltage Ratio Shift: ±5 % maximum Load Life: 1,000 hours Total Resistance Shift: onductive Plastic: ±10 % TRS maximum ermet: ±5 % TRS maximum Rotational Life (No Load) onductive Plastic: 50,000 cycles ermet: 5,000 cycles Total Resistance Shift: ±10 % TRS maximum ontact Resistance 5,000 ycles: onductive Plastic - ± % ermet - ±4 % Moisture Resistance (MIL-STD-0, Method 103, ondition ) Total Resistance Shift: onductive Plastic - ±10 % TRS ermet - ±5 % TRS Switch Units ( & Taper): ±10 % TRS Switch Units (D & S Taper): ±0 % TRS IP Rating: ntire Unit: IP64 Shaft/ushing: IP65 Page TH POTNTIOMTR SPILISTS
3 Switch Module lectrical Specifications Switch Type Rotary: SPDT (reak before make) Push-Pull: DPDT (reak before make) Power Rating (Resistive Load) Rotary: 30 VD Push-Pull: 30 VD Dielectric Withstanding Voltage (MIL-STD-0, Method 301) Sea Level: 1000 V minimum Insulation Resistance Rotary: 1000 megohms minimum Push-Pull: 1500 megohms minimum ontact Resistance Rotary: 30 milliohms maximum Push-Pull: 100 milliohms maximum Rotary Switch ontact ounce: 5 milliseconds maximum ctuation ngle: 35 maximum Switch Travel: 5 maximum Detent Torque: 1.3 N-cm (.0 oz.-in) nominal Push-Pull Switch ctuating Stroke: 0.41 cm (0.16 in.) maximum Switch Module nvironmental Specifications Vibration: 8 G Rotary ontact Resistance: 30 milliohms max Push-Pull ontact Resistance: 100 milliohms max ontact ounce: 0.1 milliseconds maximum Shock: 0 G Rotary ontact Resistance: 30 milliohms max Push-Pull ontact Resistance: 100 milliohms max ontact ounce: 0.1 milliseconds maximum Rotary Rotational Rated Power: 50,000 cycles Push-Pull Rated Power: 15,000 actuations ontact Resistance: 100 milliohms maximum Moisture Resistance (MIL-STD-0, Method 103, ondition ) Rotary ontact Resistance: 30 milliohms max Push-Pull ontact Resistance: 100 milliohms max Insulation Resistance: 100 megohms minimum after 4 Room Temperature and 500 VD S17 Resistance Taper Resistance (%) udio Linear W udio Rotational Travel (%) Page 3 TH POTNTIOMTR SPILISTS
4 S17 Dimensions - Single Potentiometer Module PKG DIMNSIONS 7.6 ± 0.30 (.300 ±.01) ± 0.5 (.650 ±.010) 8.89 ± 0.18 (.350 ±.007).64 "L" (.05) 0.30 (.0118) ± 0.30 (SINGL ND DUL MODUL SHOWN) (.43) 0.74 (.09).66 ±.05 3 X (.06 ±.00) MODL S ±0.38 (.60 ±.015) TRMINL SPING TYP. (.50) 1.7 (.050) 4 PLS. 7.6 (.300) 1.0 (.040) 6 PLS. FMS 1.3 (.05) L OF POT (DOUL MODUL FRONT ND RR RKT SHOWN) PKG DIMNSIONS P MOUNTING RKT SOLDR LUG TRMINLS.64 "L" (.05) (.43) 0.74 (.09) (.094) ± 0.51 (.197 ±.00) 0.91 ±.051 (.036 ±.00) ± ± 0.5 (.05 ±.010) ± ± 0.30 (.300 ±.01).41 ±.05 (.016 ±.00) 6.60 ±0.38 (.60 ±.015) 0.90 (.036) 1.80 (.071) 4.70 (.185) LTRIL SHMTI 1 3 W NTI-ROTTION LUG (Style "" Shown) ± 0.30 (.016) (.031 ±.01) 1.5 (.060) 5.70 (.4) SHFT FLT ORINTTION 13 ± 5 ND SUGGSTD PNL LYOUT 6.0 (.44).6 (.089) TOLRN +0.5 ( +.010).5 FOR TOLRNS SHOWN:.XX = ± (.010).XXX = ±.13 (.005) SHFT DIMNSIONS ±.80 (1/3) DIMNSIONS: MM (INHS) Page 4 TH POTNTIOMTR SPILISTS
5 S17 Dimensions - Single Potentiometer with Rotary Switch Module Product Dimensions ± 0.5 (.650 ±.010) 8.89 ± 0.18 (.350 ±.007).64 "L" (.05) 0.30 (.0118) ± ± 0.30 (.300 ±.01) (.43) 0.74 (.09).66 ±.05 3 X (.06 ±.00) 7.00 ± 0.5 (.100) TRMINL SPING Recommended P Layout TYP. (.50) 1.7 (.050) 4 PLS. 7.6 (.300) 1.0 (.040) 6 PLS. (Double Module Front and Rear racket Shown) Suggested Panel Layouts FMS 1.3 (.05) L OF POT PKG DIMNSIONS W/P MOUNTING RKT 6.0 (.44) (.50) 0.91 ±.051 (.036 ±.00) ± ± 0.5 (.650 ±.010).64 "L"± (.05) 1.3 ± 0.5 (.05 ±.010) 7.6 ± 0.30 (.300 ±.01) ± (.43) 0.74 (.09).41 ±.05 (.016 ±.00) 7.00 ± (.031).0 (.087) 0.80 (.031) 1 3 W.77 (.109) The Model 56 can be used with either of the two panel layouts shown. lectrical Schematic NTI-ROTTION LUG (Style "", 90 W Shown) ± 0.30 (.016) (.031 ±.01) 1.5 (.060) 5.70 (.4) 13 ± 5 ND Switch onfiguration SPDT 1 3 W Terminal Layout.5 FOR TOLRNS SHOWN:.XX = ± (.010).XXX = ±.13 (.005) SHFT DIMNSIONS ±.80 (1/3) DIMNSIONS: SHFT FLT ORINTTION MM (INHS) Page 5 TH POTNTIOMTR SPILISTS
6 S17 Dimensions - Single Potentiometer with Push-Pull Switch Module Product Dimensions (S SHFT/ USHING STYLS) L (S SHFT/ USHING STYLS) MOUNTING SURF 4.13 ± 0.53 (.950 ±.01) 8.89 ± 0.17 (.350 ±.007) PRIMRY UNIT 15.4 ± 0.5 (.600 ±.010) SWITH MODUL 6.99 MOUNTING SURF 0.76 (.030) 9 PLS ( ) SWITH TUTION TRVL 0.3 (.01) ± ± 0.3 (.469 ±.01) 0.64 ± 0.05 (.05 ±.00) 6 PLS. ± 0.3 ± PLS ± 0.05 (.06 ±.00) ± 0.5 SHFT FLT SHOWN T 50 % OF MHNIL TRVL (.469) SUGGSTD P LYOUT PKG DIMNSIONS WITH FRONT ND RR P MOUNTING RKT MOUNTING SURF 1.0 (.040) 4 PLS (.030) 9 PLS. PLS. 1.3 ± 0.5 (.05 ±.010) 0.3 (.01) ± ± 0.3 (.469 ±.01) 0.64 ± 0.05 (.05 ±.00) 6 PLS. ± 0.3 ± 0.3 PLS ± 0.05 (.036 ±.00) PLS ± 0.05 (.016 ±.00) TRMINL SPING PLS. DIMNSIONS: MM (INHS) ± (.05) 11.9 (.469) 8.37 (1.117) SUGGSTD P LYOUT nti-rotation Lug Terminal Layout lectrical Schematic (Style "", 90 W Shown) ± 0.30 (.016) (.031 ±.01) 1.5 (.060) 5.70 (.4) W Suggested Panel Layouts 6.0 (.44) (.50) D F.0 (.087) 0.80 (.031).77 (.109) 0.80 (.031) Page 6 TH POTNTIOMTR SPILISTS
7 S17 Switch Diagrams - Push-Pull Switch Module Switch onfigurations (Shown in Pulled Position) PULLD DPST N/NO F DPDT D F DPST N/N D PUSHD F DPST NO/NO SPST NO SPDT S17 Shaft / ushing ombinations Style ushing STD. LNGTH L.500 (1.7).65 (15.88).750 (19.05).875 (.3) (5.4) 9.53 (.375) 3/8-3UNF SHFT USHING (.50) (.375) 1.60 ± 0.5 (.063 ±.010) ± 0.10 (.047 ±.004) S Style ushing STD. LNGTH L.630 (16.0).866 (.0).984 (5.0) 8.0 (.315) 1.5 ± 0.5 (.060 ±.010) M6 X.075-6g SHFT USHING (.118) (.36) 0.79 ± 0.10 (.031 ±.004) Style ushing STD. LNGTH L.375 (9.53).500 (1.7).65 (15.88).750 (19.05).875 (.3) (5.4) (.50) 0.79 ± 0.5 (.031 ±.010) 1/4-3UNF SHFT USHING (.15) (.50) 0.79 ± 0.10 (.031 ±.004) U Style ushing STD. LNGTH L.630 (16.0).866 (.0).984 (5.0) 8.0 (.315) M7 X.075-6g SHFT USHING (.157) (.75) 1.5 ± 0.5 (.060 ±.010) 0.79 ± 0.10 (.031 ±.004) Style ushing - Flatted Shaft STD. LNGTH L.65 (15.88).750 (19.05).875 (.3) (5.4) 9.53 (.375) 3/8-3UNF SHFT USHING (.50) (.375) MX. FLT LNGTH (.65) 1.5 ± 0.5 (.060 ±.010) 5.49 ± 0.10 (.16 ±.005) R Style ushing STD. LNGTH L.630 (16.0).866 (.0).984 (5.0) 9.5 (.374) 1.80 ± 0.5 (.071 ±.010) M10 X g SHFT USHING (.36) (.394) 1.00 ± 0.10 (.039 ±.004) Page 7 TH POTNTIOMTR SPILISTS
8 Ordering Information - Single and Dual Potentiometer xample Part Number: S17-S S17 S Model S17 Mounting: = R Lug 90 W D = No R Lug or racket L = Front racket M = Rear racket N = Front & Rear racket Detent: = No Detent = enter Detent ushing: = 3/8" Dia. x 3/8" Length = 1/4" Dia. x 1/4" Length R = 10mm Dia. x 9.5mm Length S = 6mm Dia. x 8mm Length U = 7mm Dia. x 8mm Length Style = Single Pot Module P oard Pin S = Single Pot Module Solder Lugs D = Dual Modules P P oard Pin SD = Dual Modules P Solder Lugs lement: = Linear ermet 10% H = Linear ermet 10% = Linear onductive Plastic 10% = W udio ermet 10% F = udio ermet 10% D = W udio onductive Plastic 10% T = udio onductive Plastic 10% SHFT VILL LNGTH ONLY IN (FMS) USHING ode Description ode 1 3/8 16 1/, 0 5/8, 4 3/4, 8 7/8, 3 1, Metric mm R, S, U mm R, S, U 5 5 mm R, S, U Resistance: 501 = 500 ohms 103 = 10 K ohms 10 = 1.0 K ohms 3 = 0 K ohms =.0 K ohms 53 = K ohms 5 =.5 K ohms 53 = 5 K ohms 50 = 5.0 K ohms 473 = 47 K ohms 10 = 1.0 K ohms 503 = 50 K ohms 15 = 1.5 K ohms 104 = 100 K ohms 0 =.0 K ohms 4 = 0 K ohms 5 =.5 K ohms 54 = 50 K ohms 50 = 5.0 K ohms 504 = 500 K ohms vailable only for Shaft Type ushings Lengths ode Description ode = Single Slotted 1/4" Dia 4,8 = Single Flatted 1/4 Dia 0,4,8,3 = Single Slotted 1/8 Dia 1,16,0,4,8 R = Single Slotted 6 mm Dia R 16,,5 T = Single Slotted 4 mm Dia U 16,,5 U = Single Slotted 3 mm Dia S 16,,5 For Pricing and Delivery information, reate an RFQ on our website or ontact your State lectronics Sales Representative at Page 8 TH POTNTIOMTR SPILISTS
9 Ordering Information - Single Potentiometer with Switch xample Part Number: S17-R S17 R Model S17 lement: = Linear onductive Plastic 10% D = W udio onductive Plastic 10% Detent: = No Detent ushing: = 3/8" Dia. x 3/8" Length = 1/4" Dia. x 1/4" Length Mounting: = R Lug 90 W D = No R Lug or racket L = Front racket N = Front & Rear racket Style R = Single Pot Module w/ Rotary Switch - Pin Mount P = Single Pot Module w/ Push-Pull Switch - Pin Mount SHFT VILL LNGTH ONLY IN (FMS) USHING ode Description ode 0 5/8, 4 3/4, Resistance: 501 = 500 ohms 103 = 10 K ohms 10 = 1.0 K ohms 3 = 0 K ohms =.0 K ohms 53 = K ohms 5 =.5 K ohms 53 = 5 K ohms 50 = 5.0 K ohms 473 = 47 K ohms 10 = 1.0 K ohms 503 = 50 K ohms 15 = 1.5 K ohms 104 = 100 K ohms 0 =.0 K ohms 4 = 0 K ohms 5 =.5 K ohms 54 = 50 K ohms 50 = 5.0 K ohms 504 = 500 K ohms vailable only for Shaft Type ushings Lengths ode Description ode = Single Slotted 1/4" Dia 4,8 = Single Flatted 1/4 Dia 0,4,8,3 = Single Slotted 1/8 Dia 1,16,0,4,8 For Pricing and Delivery information, reate an RFQ on our website or ontact your State lectronics Sales Representative at Page 9 TH POTNTIOMTR SPILISTS
Features Metal shaft and bushing Consistent, smooth quality feel Up to 4 sections available Rotary switch option designed for on-off function control
*RoHS COMPLIANT VERSIONS AVAILABLE Features Metal shaft and bushing Consistent, smooth quality feel Up to sections available Rotary switch option designed for on-off function control RoHS compliant versions
More informationmm Square Sealed Panel Control
*RoHS COMPLIANT Features Conductive plastic PC board and bushing mount Plastic or metal bushing and plastic shaft Withstands typical industrial washing processes Compact package saves board and panel space
More informationn Available in a variety of pin-out configurations
*ohs COMPLIANT Features n Available in a variety of pin-out configurations n Virtually infinite electrical circuit isolation n Metal or plastic shaft options n ohs compliant* Model 91, 9, 93, 94 & 95-5/8
More informationSeries 388/389 Custom Potentiometer Designer Guide
Series 88/89 ustom Potentiometer Designer Guide.05 [0.8mm] /8 [.8mm].50 [6.5mm].055 [.7mm] 6 ROUTE 0, STE 6 EST HNOVER NEW JERSEY 0796 Phone 97-887-550 Toll Free -800-6-808 Fax 97-887-90 Internet POT PROTOTYPES
More informationELUMILED.COM. Model 91, 92, 93, 94 & 95-5/8 Square Single-Turn Panel Control
*ohs COMPLIANT VESIONS AVAILABLE Features Available in a variety of pin-out configurations Virtually infinite electrical circuit isolation Metal or plastic shaft options ohs compliant versions available*
More informationSingle Turn Rotary Wirewound Potentiometers
Single Turn Rotary Wirewound Potentiometers THE POTENTIOMETER SPEILISTS QD & QDD Series 1.328" Diameter, 3 watts, Single or Dual Module... pg. 2 Suggested replacement for Honeywell R20 and 43-Series QE
More informationSeries 70 Custom Potentiometer Designer Guide
Series 70 ustom Potentiometer Designer Guide.05 [0.8mm] /8 [.8mm].50 [6.5mm].055 [.7mm] 6 ROUTE 0, STE 6 EST HNOVER NEW JERSEY 0796 Phone 97-887-550 Toll Free -800-6-808 Fax 97-887-90 Internet http://www.potentiometers.com
More informationmm Square Sealed Panel Control
*RoHS COMPLIANT Features n Conductive plastic n PC board and bushing mount n Plastic or metal bushing and plastic shaft n Withstands typical industrial washing processes n Compact package saves board and
More informationSeries 70 Custom Potentiometer Designer Guide
Series 70 Custom Potentiometer Designer Guide.05 [0.8mm] /8 [.8mm].50 [6.5mm].055 [.7mm] 6 ROUTE 0, STE 6 EST HNOVER NEW JERSEY 0796 Phone Internet POT PROTOTYPES PRONTO! Dual Potentiometer, Dual Rotary
More information30mm Diameter, Single-Turn, Wirewound Industrial Panel Controls RA30YME RA30YD RA30Y
TOCOS PANEL CONTROLS 30mm Diameter, Single-Turn, Wirewound Industrial Panel Controls RA30YME RA30YD RA30Y Features 30mm diameter, single-turn industrial panel controls Wirewound element Linear or audio
More informationSeries 270. Commercial Miniature 5/8" (16mm) Diameter Composition Variable Resistors. Electrical and Mechanical Specifications.
Series 270 Commercial Miniature 5/8" (16mm) Diameter Composition Variable Resistors Miniature 5/8" (16mm) size Versatile mounting styles: bushing twist tab bend tab snap-in PC bracket solder lug or PC
More informationSeries 308 Electrical Specifications
Series 38 Potentiometer 1/2 in. sq..5 Watt Series 39 Potentiometer 1/2 in. sq. 1. Watt Description The Series 38 and 39 are high-performance, low-cost potentiometers. They are also available with S.P.S.T.
More information24mm Diameter, Single-Turn, Carbon Industrial Panel Controls
TOCOS PANEL CONTROLS 24mm Diameter, Single-Turn, Carbon Industrial Panel Controls RV24YN RV24YGME RVT24YN Features 24mm diameter, single-turn industrial panel controls Carbon film element Linear or audio
More informationRotary Potentiometer. 1/2 Watt, Composition. Electrocomponents. Industrial 24mm Diameter. Rotary Potentiometer. Features
Electrocomponents Series 450 Data Sheet Rotary Potentiometer Industrial 4 Diameter 1/ Watt, Composition Rotary Potentiometer Features - Bushing - Twist or Bend Tab - Snap-in PC Bracket - PC Terminal Electrical
More informationGeneral Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
More informationPrecision Potentiometers
Precision Potentiometers w w w. b o u r n s. c o m I. Product Selection Guide...58 II. Potentiometers Multiturn...60 Single-Turn...65 Knobpot...70 Pushbutton (Digital Readout)...7 III. Definitions & Test
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
More informationGeneral Specifications
Series D Light Touch Miniature Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA maximum @ 8V A/D maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V) Note: Find additional
More informationTemperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance
.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature Range Temperature
More informationOW20BU/B4PC1S OW20BU/N4PC1S-CH *
OW20BU/B4PC1S OW20BU/N4PC1S-CH * B4OW1S N4PC1S 4 Amp Single Pole Switch CH Change Over (Double Throw) OW Ordinary Wiring (recommended for soldering) PC For Printed Circuit * Representative of range: Switch
More informationSeries 206/208 Through-Hole DIP Switch
Available with SPST, SPDT, DPST, 3PST circuitry choices Available with low profile, standard, or extended actuator heights. Consult the ordering information for options. RoHS compliant Optional top tape
More informationT he Cole Series S3900 miniature P.C. termination rotary switch
S3900 series T he Cole Series S3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,
More informationXA16ECO/B1PC1S XA16ECO/B4PC1S
XA16ECO/B1PC1S XA16ECO/B4PC1S B4PC1S B1PC1S - 14 1 Amp Single Pole (Single Throw) Switch XA Terminals Bent Extra Long Toward Switch PC Printed Circuit Terminals This image shows the XA terminals located
More informationGeneral Specifications
Series E Light Touch Miniature Pushbuttons eneral Specifications Electrical apacity (Resistive Load) Power Level (silver): A @ 25V A for silver contacts Logic Level (gold): 0.4VA maximum @ 28V A/D maximum
More informationSecurity Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter
Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless
More informationButt Contact Pushbutton Switches. Series 30 and 46 Snap-in Panel Mount
utt ontact Series 30 and 46 Snap-in Panel Mount TURS Sleek lack Matte ezel onvenient Snap-In ront Mount hoice of 6 utton olors SPST, SPT or PT ircuitry lternate ction, Positive eel and Overtravel Versions
More informationGeneral Specifications
Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)
More information1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer FEATURES Robust construction High rotational life (50 000 cycles) Up to three sections PC support plates Rotary switches and solder lugs terminals
More informationor 0.5Ω whichever is greater (152 only) Temperature Coefficient of Resistance MODEL 152 MODEL 159 Refer to standard
Model 152, 159 FEATURES Rugged, High-Quality, All Metal Housing Short Length Behind Panel (11/32 ) Choice of Two Elements for Broad Resistance Range- 5Ω to 2MΩ No Glued Joints Extra Taps AVAILABLE High
More informationC&K 8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Models Available Features/enefits Positive tactile feel Multi-positions available Wide variety of termination options Typical Applications Instrumentation Computer peripherals
More informationTYPICAL SWITCH ORDERING EXAMPLE TERMINALS
Series M TYPIL SWITH ORDERIN EXMPLE M0 S 0 POLES SMLL TOLES SMLL BUSHINS ONTT MTERILS & RTINS OPTIONL PS P OLORS SPDT DPDT SPT PDT * PDT DPT * -pole available on vertical models only. IRUITS ON NONE ON
More informationDistinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
More informationGeneral Specifications
Series M Waterproof Miniature eneral Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
More informationGeneral Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
More informationHow to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use
More informationCustom Potentiometer Designer Guide
Custom Potentiometer Designer Guide.015 [0.38mm] 1/8 [3.18mm].250 [6.35mm].055 [1.47mm] 36 Route 10 East Hanover New Jersey 07936 Phone POT PROTOTYPES PRONTO! Now almost any special combination potentiometer
More informationGeneral Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
More informationSection 26: Capacitors, Resistors, Potentiometers, Trimmers. Capacitors Resistors Potentiometers Trimmers...
Section 26: Capacitors, Resistors, Potentiometers, Trimmers Sub-Section Page Capacitors.....................................................680 Resistors......................................................681
More informationM Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
More informationspectrasymbol.com Rev F3 - Page 1
Features - Linear Position Sensor - IP65 Dust Proof, Water Proof (Intense Spray) - Polyester Substrate - 3M Pressure Sensitive Adhesive (PSA) - Upon Request - Male or Female Nicomatic or Berg - Wiper of
More informationTemperature Coefficient of Resistance, Tracking Maximum Operating Voltage
627, 628 Series.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor etworks RoHS Compliant ELECTRICAL Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature
More informationT he Cole Series P3900 miniature P.C. termination rotary switch
P3900 series T he Cole Series P3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,
More informationPERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, MOMENTARY, 4 CIRCUIT OR DPDT (10 AMPERES), UNSEALED
INCH-POUND MIL-PRF-8805/77H 19 September, 2000 SUPERSEDING MIL-PRF-8805/77G 3 September 1999 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, MOMENTARY, 4 CIRCUIT OR DPDT (10 AMPERES), UNSEALED This
More information305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
More information8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
More informationCustom Potentiometer Designer Guide
Custom Potentiometer Designer Guide.015 [0.38mm] 1/8 [3.18mm].250 [6.35mm].055 [1.47mm] 36 Route 10 East Hanover New Jersey 07936 Phone POT PROTOTYPES PRONTO! Now almost any special combination potentiometer
More informationSwitches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
More information7000 Series Miniature Toggle Switches
Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications
More informationC&K S Series Slide Switches
Switches Features/Benefits 6 to 15 S nclosed housing PC and Snap-in panel mounting Reversing option Models Available Typical Applications Portable tools Small appliances Floor care products Build-A-Switch
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
More informationTYPICAL SWITCH ORDERING EXAMPLE A2 G 40. Contact Materials & Ratings
MB4 s & ircuits SPDT ON (ON) DPDT ON (ON) ( ) = Momentary E E S S Bushings Smooth with D Flat Threaded with D Flat IMPORTNT: Switches are supplied without UL, culus & S marking unless specified. UL, culus
More informationPOTENTIOMETERS ENCODERS & CODED SWITCHES TP/RH7& TP/RH9.
POTENTIOMETERS ENCODERS & CODED SWITCHES TP/RH7& TP/RH9 www.tocos.com We are TOCOS TOCOS America, Inc. is a wholly owned subsidiary of Tokyo Cosmos Electric Co., Ltd. ( TOCOS), a worldwide supplier of
More informationT Series Subminiature Toggle Switches
Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical
More informationC&K E Series Sealed Miniature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications
More informationF-Series General Specifications
arling F-Series General Specifications F-Series breakers are available up to 700, and are also available with a 25 millivolt metering shunt construction. This optional construction provides a safe method
More information1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometers
, /" 7 mm Conductive Plastic and Cermet FEATURES Robust construction High rotational life cycles Up to three sections PC support plates Rotary switches and solder lugs terminals available Compliant to
More informationC&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
More informationContents Pushbuttons. AB Series...C6 0.4VA Logic Level; Process Sealed Straight, Right Angle, & Vertical PC
ontents Pushbuttons B Series... 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical P BB Series... ntistatic; 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical P DB Series...
More informationGeneral Specifications
Series WT Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity
More informationM150. Cable-Extension Position Transducer. World s Smallest Stringpot Range: inches High-Cycle Space-Critical Applications .
able-extension Position Transducer World s Smallest Stringpot Range: 0-1.5 inches High-ycle Space-ritical Applications M150 Specification Summary: GENERAL Full Stroke Range....0-1.5 inches Output Signal
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical
More information341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
More information8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
More informationTYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on
More informationPOSITION TRANSMITTERS
POSITION TRANSMITTERS GENERAL DESCRIPTION Jordan Control s Series of position transmitters are rugged, compact industrial components that couple a precision feedback component and/or limit switches to
More information8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
More informationRoHS. Specifications. Part Number Configurator
Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 48VDC Electrical Life: 50,000 Cycles Contact Resistance: 50mΩ Max. Insulation Resistance:
More informationMYSTR ELEMENTS. % Eo/Ein % TRAVEL % TRAVEL. Examples of monotonic functions. Examples of non-monotonic functions TECHNICAL SPECIFICATIONS DIMENSIONS
MYSTR ELEMENTS Noise 0.03% output smoothness Accuracy Essentially infinite Independent and absolute linearity to ±0.05% V- V- Resistance-Temperature Characteristic Typically ±5% maximum change in total
More informationPushbutton Switches Sub-Miniature
Pushbutton Switches Specifications: Contact rating Mechanical life Maximum contact resistance Minimum insulation resistance Dielectric strength Operating temperature Materials: Case Plunger Bushing Housing
More informationDistinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
More informationCLAMP INSTALLATION GUIDE
PL SRIS LMP INSTLLTION GUI "HOL OWN" LMP INSTLLTION 1. rill and tap two M5X0.8 threaded holes in the base plate in each location you wish to install a clamp (reference the PL catalog for information on
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
More informationCIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 200 991210 03 / 10.04 1/220 HDS11 8 Sectional directional control valves HDS11 8 Standard valves................................................................
More informationSP1. Compact String Pot Voltage Divider Output SP1-25 SP1-50 SP SP1-50-3
SP Compact String Pot Voltage Divider Output Linear Position to 50 inches (70 mm) Rugged Polycarbonate Enclosure IP67 Optional Mounting Bracket & Optional Sensor Cover w/connector IN STOCK for Quick Delivery!.9
More informationRotary Switches Product Selection Guide
Switches Product Selection Guide Series A RTA M R F H RW RM ENC Switch Type Multi-pole/ Multi-position Multi-pole/ Multi-position Half-inch Rota-slide Rota-slide Power Rota-slide Subminiature SMT Subminiature
More informationHigh-force: 230 g. Projected 7.3 mm General-purpose: 160 g. High-force: 230 g. Flat 4.3 mm General-purpose: 200 g.
Tactile Switch BW Tactile Switch with Sealed Construction for Automatic Soldering Sealed construction conforming to IP67 (IEC-6059) provides high reliability in locations exposed to dust or water. Available
More informationPosition Transmitters. Instruction Manual. Established Leaders in Valve Actuation. Electric Actuators and Control Systems
Electric Actuators and Control Systems Established Leaders in Valve Actuation Position Transmitters Instruction Manual Publication P973E Issue 08/09 Instruction Manual IM-0665 Position Transmitters Where
More informationMiniature Toggle Switches
T80-T Miniature Toggle Switches Compliant D E L F R E E TCT DIP PUSH BUTT SLIDE ROCKER TOGGLE INDEX SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full
More informationMICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction
MIRODOT Microminiature D onnectors Introduction Product Facts Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist ontacts are designed The
More informationC&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
More information300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES
FEATURES Dry circuit through power ratings. ompact size SPST momentary and alternate action models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted and unlighted. SPEIFIATIONS
More informationC&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
More informationC&K ET Series Sealed Subminiature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact sizeand small footprint save PCB space Typical
More informationDIM. A (+ 0,05 0,51) .437 ±.020 (11,10 ± 0,51) DIM. F ±.015 (0,38) INTEGRAL ASSEMBLY NUT, DO NOT REMOVE
Multi-Deck SERIES,, and " Diameter, Amp, Standard, Military SR0 FEATURES Rugged Construction Insures Switch Operation for the Life of Your Equipment Many Circuitry Options MIL Qualified Versions MIL-S-/0
More informationSingle Pole Circuit Protectors 55. Multi-Pole Circuit Protectors 56. Configurations 58. Operating Characteristics 59.
Single Pole Circuit Protectors 55 Multi-Pole Circuit Protectors 56 Configurations 58 Operating Characteristics 59 Delay Curves 60 Specifications 61 Decision Tables 62 SINGLE POLE CIRCUIT PROTECTORS The
More information8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
More informationKiosks. Body Finish Options. Actuator. Lens Color Options. Rating Options. Anodized 48VDC. 1 - Black Anodized. 7 - Blue 8 - Green 9 - Red.
Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 8VDC Mechanical Life: 200,000 Cycles Electrical Life: 50,000 Cycles Contact Resistance:
More informationSwitch EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS 3PST EDG/EDS 4PST EDG/EDS DPDT
EDG/EDS SERIES SLIDE TYPE EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS PST EDG/EDS 4PST EDG/EDS DPDT FETURES Tactile response is performed directly by larger contact pressure to ensure very stable contact.
More information1/4" Square Single-Turn Cermet Sealed Trimmer
/4" Square Single-Turn Cermet Sealed Trimmer FEATURES Industrial grade Fully sealed Miniature package Rotor designed for automatic machine adjust interface Withstands harsh environments and immersion cleaning
More information17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
More informationAP/UP, AP/MIL Series Magnetic Circuit Protectors
AP/UP, AP/MIL AP/UP, AP/MIL Series Magnetic Circuit Protectors Introduction 68 Single Pole 69 Multi-Pole 70 Configurations 72 Operating Characteristics 73 Delay Curves 74 Specifications 75 Decision Tables
More information9 mm Multi-Ganged Potentiometer
9 mm Multi-Ganged Potentiometer QUICK REFERENCE DATA Multiple module Up to 7 modules Switch module n/a Detent module Yes Special electrical laws A: linear, L: logarithmic, F: reverse logarithmic and others
More informationJay-El Mark 15 P/N 10732
Jay-El Mark 5 P/N 07 JAY-EL 07 JAY-EL MARK 5 P/N 07 ILLUMINATED SWITCH MEETS REQUIREMENTS OF MIL-S-885 Catalog No. 00G -0 For more information, contact our sales team at 0.5.700 or hmisales@ducommun.com
More informationPT9420. Heavy Industrial mA, mA ma*
PT9 Heavy Industrial...m, 0...m bsolute Linear Position to 550 inches (100 cm) luminum or Stainless Steel Enclosure Options VLS Option To Prevent Free-Release Damage IP68 NEM 6 Protection Hazardous rea
More informationSP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC)
DATA SHEET Order code Manufacturer code Description 75-0211 100-SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC) The enclosed information is believed to be correct, Information may change without notice
More informationE Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
More informationJay-El Mark 11 P/N 10648
Jay-El Mark P/N JAY-EL MARK P/N ILLUMINATED SWITCH MIL-S-/ ON THE QUALIFIED PRODUCTS LIST Catalog No. 0G -0 MARK is designated as Mil-S-/ on the Qualified Products List. SUNLIGHT READABLE DISPLAYS The
More informationControl Relays Overview
Control Relays Overview DESIGN FEATURES Among the advances Agastat Control Relays offer over existing designs is a unique contact operating mechanism. An articulated arm assembly amplifies the movement
More information