Jay-El Mark 15 P/N 10732
|
|
- Joel Fletcher
- 6 years ago
- Views:
Transcription
1 Jay-El Mark 5 P/N 07 JAY-EL 07 JAY-EL MARK 5 P/N 07 ILLUMINATED SWITCH MEETS REQUIREMENTS OF MIL-S-885 Catalog No. 00G -0 For more information, contact our sales team at or hmisales@ducommun.com
2 JAY-EL MARK 5 P/N 07 ILLUMINATED PUSHBUTTTON SWITCH/INDICATOR SUNLIGHT READABLE DISPLAY All combinations of display types are available including sunlight readable. Display Type 8. This display type utilizes maximum lighted contrast enhancing techniques. Available with T- or T- / based lamps. Most efficient Display Type 8 is with "T" type pushbutton using T- lamps. This " T " type pushbutton eliminates high legend surface temperatures and can provide power saving up to 70% with no loss of luminance. Luminances far exceed requirements of MIL-STD- when using.5 MSCP lamps. JAY-EL 07 Jay-El can provide P/N 07 switches and indicators with NVIS compatible lighting. Contact factory. DESIGN FEATURES Retained pushbutton unplugs and hinges down for easy lamp replacement. No tools required. All switch and lamp terminals are available in turret or PC termination. COMPACT SIZE Outside dimensions are.7 X.688 and.780 in length. Individual unit mount in a.5 X.695 hole or maybe matrix mounted. The Mark 5 is available as an indicator single pole momentary switch. Switch can be positioned to extend thru any overlay panel thickness for edge-lit panel applications. The Mark 5 is designed to mount to sub-panel with brackets from rear of panel. Brackets may be spotwelded or as shown to assure secure shock and vibration proof mounting. Typical mounting method All spotwelded tabs or mounting brackets per customer drawing Page For more information, contact our sales team at or hmisales@ducommun.com
3 ENGINEERING SPECIFICATIONS Switch Contacts: Silver Alloy contacts are standard. Gold contacts are recommended for reliable low level switching below.0 amperes. Switch Ratings: ELECTRICAL SILVER Maximum / EMI SHIELDING Load Resistive Inductive Lamp / 8VDC 7.0 Amps.0 Amps.5 Amps Sea Level 5VAC, 60Hz 7 Amps 7 Amps Amps 50,000 FT 8VDC.0 Amps.5 Amps.5 Amps Grounding wipers provide chassis ground for EMI. EMI SCREEN HOUSING / Inrush. 0: for 0 milliseconds maximum. / Minimum conditions are dependent on use and atmospheric conditions. Contact Jay-El for detailed application information. Max. Voltage Max. Current Min. Current Min. Voltage GOLD Sea Level and 50,000 Feet 8VDC Amp.Res..5 Amp.Ind. 5 Microamps 5 Millivolts Maximum Contact Res. OHM MECHANICAL GROUNDING WIPERS Mechanical Life: 00,000 cycles minimum Contact Resistance: 5 milliohms maximum in accordance with MIL-S-885 for switch contacts and OHM maximum in accordance with MIL-S-885 for lamp contacts. Electrical Life: Para..6. of MIL-S-885. Lamp Life: T- / midget flange base incandescent is standard. Actuation force: pounds. Pushbutton Travel: Pretravel Overtravel.05 minimum Switch Action: pole, momentary, form "C" Weight: 0.55 ounces maximum ENVIRONMENTAL Meets all applicable requirements of Mil-S-885 Available on special order: T / Neon (External Ballast 0 K minimum) T sub-midget flange base with special pushbutton modifications. T- / midget flange base LED (Recommended for back lighting only) ALL INFORMATION PUBLISHED IN THIS CATALOG IS EFFECTIVE AT TIME OF PUBLICATION AND IS SUBJECT TO CHANGE WITHOUT ICE. For more information, contact our sales team at or hmisales@ducommun.com Page
4 MAJOR OUTLINE DIMENSIONS STANDARD SWITCH/INDICATOR.9.5 MIN.79 MIN LEGEND AREA (REF) SCHEMATIC (TYPICAL) C NO NC.08 R (TYP) SWITCH.780 INDICATOR C NO NC PRINTED CIRCUIT TERMINATION SWITCH/INDICATOR SWITCH INDICATOR R DIA ( PL) LAMP TERMINALS X.06 Tolerances: Unless otherwise specified - Fraction + /",.XX+.0, XXX For more information, contact our sales team at or hmisales@ducommun.com Page
5 ORDERING PROCEDURE - Fill out Preliminary Product Specification using Tables below and submit to Jay-El for Customer Code assignment. TABLE BASIC P/N TABLE MOUNTING TYPE TABLE HOUSING TABLE SPLIT GROUND TABLE 5 EMI TABLE 6 INTEGRAL SEAL TABLE 7 RETAINED TABLE 8 STYLE TABLE 9 SWITCH POLES TABLE 0 07 BLACK CRES YES NO 0 INDICATOR SPDT (ABOVE AMP) S SILVER (BELOW AMP) G GOLD TABLE SWITCH ACTION TABLE UNLIGHTED BACKGROUND TABLE DISPLAY DATA TABLE LIGHTED TABLE 5 DISPLAY TYPE TABLE 6 CHARACTER SIZE AND PLACEMENT O INDICATOR M MOMENTARY BLK DW NG R A Y G B BLACK DIFFUSED NEUTRAL GRAY RED AMBER YELLOW GREEN BLUE TO BE SPECIFIED ON PRELIMINARY FORM ES: * AG OR AY SHOULD BE SPECIFIED WHEN GREEN OR YELLOW IS TO MEET MIL - C AY APPEARS AMBER WHEN ILLUMINATED. * B AND AG SPECIAL HIGH BRIGHT BLUE & GREEN RECOMMENDED FOR DISPLAY TYPE 8. C CLEAR R RED A AMBER Y YELLOW G GREEN B BLUE DW DIFFUSED B BLUE * * DISPLAY TYPE 8 IS AVAILABLE IN.0 STROKE WIDTH ONLY. WL NG AG AY AG LIGHT NUETRAL GRAY GREEN YELLOW GREEN. BLACK CHARACTERS ON DIFFUSED BACKGROUND. BACKGROUND ILLUMINATES IN.. REPLACED BY DISPLAY TYPE 7.. READILY DISCERNIBLE OPAQUE CHARACTERS ON NEUTRAL GRAY ILLUMINATING BACKGROUND.. ILLUMINATING CHARACTERS ON BLACK BACKGROUND. CHARACTERS SHALL APPEAR ILLUMINATED IN UNLIT CONDITION. 5. CONTRASTING OPAQUE CHARACTERS ON ILLUMINATING ED BACKGROUND. BLACK CHARACTERS ON YELLOW OR AMBER BACKGROUND. CHARACTERS ON ALL OTHER S. 6. DISPLAY TYPES COVERED BY THIS TABLE SHOULD BE SPECIFIED BY A E ON PURCHASE ORDER OR MAY BE SPECIFIED ON JAY-EL CUSTOMER SPECIFICATION. 7. CHARACTERS ILLUMINATE IN ON BLACK BACKGROUND. 8. SUNLIGHT READABLE ILLUMINATING CHARACTERS ARE HIDDEN BEFORE LIGHTED. BLACK BACKGROUND. CHARACTERS ARE VISIBLE IN DIRECT SUNLIGHT. (0,000FC) WHEN LIGHTED. SEE CHARACTER INFORMATION CHART TABLE 7 LAMPS T / 8 5V 0 V 87 8V T 78 5V 689 8V OR EQUIVALENT * * * ALL STANDARD UNITS HAVE RETAINED S AND A BLACK BAND AT THE FRONT OF THE SWITCH HOUSING CHARACTER INFORMATION (HORIZONTAL DIRECTION ONLY) To obtain more characters per line other type fonts are available. Contact Jay-El for further information. LEGEND SEGMENT S (REF) 5 CONDENSED BLOCK SIZE STROKE HEIGHT CHARACTERS PER LINE SEGMENT SEGMENT SEGMENT OF LINES JAY-EL PRODUCTS J AY-EL PRODUCTS JAY-EL PRODU JAY-EL PRO * * DISPLAY TYPE 8 ONLY illuminating Area.75 x For more information, contact our sales team at or hmisales@ducommun.com FUTURA MEDIUM CONDENSED SIZE STROKE HEIGHT JAY - EL PRODUCTS JAY - EL PRODUCTS JAY - EL PRODU JAY - EL PRO Page
JAY-EL MARK 10 P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885
TOP MARK 10 JAY-EL MARK 10 ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885 Catalog No. 7010-5 11-03 MARK 10 DESIGN FEATURES ELECTRICAL THIS SWITCH IS DESIGNED TO MEET THE EXACTING REQUIREMENTS
More informationMARK 11 JAY-EL MARK 11 P/N ILLUMINATED PUSHBUTTON SWITCH MIL-S-22885/77 ON THE QUALIFIED PRODUCTS LIST
MARK JAY-EL MARK P/N 0 ILLUMINATED SWITCH MIL-S-/ ON THE QUALIFIED PRODUCTS LIST Catalog No. 00G -0 MARK MARK is designated as Mil-S-/ on the Qualified Products List. Page 0 Page SUNLIGHT READABLE DISPLAYS
More informationJay-El Mark 11 P/N 10648
Jay-El Mark P/N JAY-EL MARK P/N ILLUMINATED SWITCH MIL-S-/ ON THE QUALIFIED PRODUCTS LIST Catalog No. 0G -0 MARK is designated as Mil-S-/ on the Qualified Products List. SUNLIGHT READABLE DISPLAYS The
More informationSAFRAN ELECTRONICS & DEFENSE AVIONICS USA LLC. Series 90 Tellite Switch
SAFRAN ELECTRONICS & DEFENSE AVIONICS USA LLC Series 90 Tellite Switch series 90E Features The Series 90 Tellite units are miniature, two-lamp lighted push-button switches and/or word indicator lights
More information3.2. Pushbuttons. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents
. Pushbuttons Product Description Eaton offers a wide range of pushbutton switches for standard industry applications such as appliances, electronics, medical and test instrumentation, office equipment
More informationSWITCHES MULTIPLE STATION SWITCHES FAX:
FAX: 773 79-9 MULTIPLE STATION MULTIPLE STATION 301 SERIES IBS SERIES 5000 DW MULTI-SWITCH SERIES 000, 7000 DW MULTI-SWITCH FEATURES Switches are designed to meet performance requirements of sophisticated
More informationSeries 582. Two Pole Lighted Pushbutton Switches
Series 582 Two Pole Lighted Pushbutton Switches 582 Two Pole Lighted Pushbutton Switches Development The Series 582 is designed for use in the crew stations of commercial and military aircraft, shipboard
More informationWe Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories
We Make It Easy! 1. We assemble the parts for you saves you time and money. Includes LEDs and accessories 2. Easy to order all options and accessories displayed in easy-to-follow ordering table. No complicated
More informationSwitches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
More informationDistinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
More informationROTARY SWITCHES. Quality Features: LIGHTED ROTARY UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.
SWITCH R2 UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.83 PANEL CUTOUT Used in the heavy equipment, marine, process control and instrumentation markets the R2 rotary switch
More informationSOLDER SHORT SOLDER SCREW
32 Honeywell MICRO SWITCH Sensing and Control For application help: call 1-800-537-6945. CUT-A-WAY V3 MINIATURE BASIC SWITCH GENERAL INFORMATION V3 miniature basic switches feature high electrical capacity
More informationPERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, SPDT, UNSEALED
INCH-POUND 14 June 2010 SUPERSEDING 22 May 2006 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, SPDT, UNSEALED This specification is approved for use by all Departments and Agencies of the Department
More informationPERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, 10 AMPERES AND LOW LEVEL, UNSEALED
INCH-POUND 2 January 201 SUPERSEDING 1 May 200 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, AMPERES AND LOW LEVEL, UNSEALED This specification is approved for use by all Departments and Agencies
More informationDistinctive Characteristics
Distinctive Characteristics Carefully designed light diffusion and filtering system produce bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
More information8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
More informationTable of Contents. Incandescent Miniature EMI Suppressed Watertight Size T-1 3/ Incandescent Miniature Size T-1 3/
Indicator Products Table of Contents DESCRIPTION PRESSLITE TYPE OPTOLITE CONTINUED PAGE NUMBER DESCRIPTION TYPE PAGE NUMBER Friction Cap Bases EMI Suppressed Alternate Action 5 Amp S.P.D.T Form 99-36980
More informationDistinctive Characteristics
Distinctive Characteristics Wide selection of illumination effects is achieved with single and bicolor, - or -element LEDs, in flat, beveled, or sculptured caps. LED colors include red, amber, green, white,
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
More informationC&K DA Series Miniature Single Pole Rocker Switches
Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C ogic evel (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA ~ 0.1A
More informationDistinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
More informationContacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Low energy contacts gold plated. Minimum PUSHBUTTON
Pilot Devices Technical data UL General UL technical data Contact blocks Rated insulation voltage, UL 600V Rated thermal current 10A / 600VAC 2.5A / 600VDC Minimum rating 24VDC, 5mA Mechanical life (millions
More informationC&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
More informationAmphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
More informationContacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Wire size
Technical data UL Pilot Devices General UL technical data Contact blocks Rated insulation voltage, UL 600V Rated thermal current 10A / 600VAC 2.5A / 600VDC Minimum rating 24VDC, 5mA Mechanical life (millions
More informationEnvironment-Sealed Basic Switches
HoneywellSensing and Control 1-800-537-6945 USA 1-815-235-6847International 1-416-293-8111Canada 13 Environment-Sealed Basic Switches GENERAL INFORMATION SE and XE switches are the smallest environment-sealed
More informationDistinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Choice of super bright LEDs in white, green, and blue as well as bright
More informationSERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive)
SWITCH SELECTION GUIDE Trim Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive) MT T1 Quiet Operation, Momentary 10mA @ 5VDC IP64, IP68S 11/16 dia. Threaded SPST (x2)
More informationPERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, MOMENTARY, 4 CIRCUIT OR DPDT (10 AMPERES), UNSEALED
INCH-POUND MIL-PRF-8805/77H 19 September, 2000 SUPERSEDING MIL-PRF-8805/77G 3 September 1999 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, MOMENTARY, 4 CIRCUIT OR DPDT (10 AMPERES), UNSEALED This
More informationSealed Pushbutton Switches
For application help: call 1-800-537-945. Honeywell MICO SWITCH Sensing and Control 113 meet high-performance needs for rugged, compact size sealed switches that are exposed to water, oil, cleaning solvents,
More information2.4 Dual Motion Safety Switch /8007 EURO SR /8005 Euro Full Size /8065 ESPORT
Rockers NGR. Introduction Product Selection Guide..................................... NGR Product Description....................................... Number Selection..................................
More informationOrdering Information. Snap Action Switch D2F. Subminiature Snap Action Switch D2F- Model Number Legend. Snap Action Switch D2F 31
Snap Action Switch Subminiature Snap Action Switch Switches 3 A loads (general-purpose), 1 A loads (low force general-purpose) and 0.1 A loads(microvoltage/ microcurrent) Long life span assured by high-precision
More informationKX Series Precision Sine Switches
Precision Sine Switches FEATURES Hermetic seal provides exceptional operational freedom from environmental conditions Compactly designed to fit small, narrow spaces Available with either screw or solder
More informationT he Cole Series S3900 miniature P.C. termination rotary switch
S3900 series T he Cole Series S3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,
More informationYB2 Panel Seal. New Square Actuator Option. Series YB2. Contact No Thin Flush Mount Pushbuttons. 24mm Square Panel Seal Pushbuttons
Contact No. 182 YB2 Panel eal Thin Flush Mount Pushbuttons New quare Actuator Option 2011-01-26 www.nkk.com 1 General pecifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V
More informationRocker Switches & Twin R13. Miniature rocker switch. Ultra thin rocker switch. Ratings up to 10A, 250Vac. High inrush tolerance
Rocker Switches Ultra thin rocker switch Ratings up to 15A, 250Vac Single and twin gang single: 17.4 x 6.8mm twin: 17.4 x 13.4mm Miniature rocker switch Ratings up to 15A, 250Vac High in-rush tolerance
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationT101J1ZQE2 T201J1ABE2 T101J1AVBE2 T101J1V3BE2. models available, see page B-52.
T101J1ZQE2 T201J1AE2 T101J1AVE2 T101J1V3E2 models available, see page -52. Easy uild-a-switch elow is a complete listing of available options for T SERIES TINY ROCKER SWITCHES. uild-a-switch allows you
More informationDistinctive Characteristics
Distinctive Characteristics Full face and spot illumination available. Front panel relamping. Choice of super bright LEDs in white, green, and blue in addition to bright red, amber, and green LEDs. Compact
More informationGeneral Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
More informationGeneral Specifications
Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum
More informationGeneral Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationM Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
More informationELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67
PUSHBUTTON SWITCHES ELECTRO-MECHANICAL MINIATURE SEALED SERIES 48EM: ACTUAL SIZE FLEX-TECH MINIATURE SEALED PUSHBUTTON SWITCHES This rugged multi-option sealed pushbutton series offers the utmost in choices
More information5 Series - Mechanical Latch 2PDT - 4PST, 30 Amps
5 Series - Mechanical Latch 2PDT - 4PST, 30 Amps The 5 series is a 2 coil mechanical latch electrical reset power relay. It is panel mounted with screw terminals, and has 600 volt spacing. The 5 series
More informationIL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS
More informationSPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): A @ 25/250V AC or A @ 30V C ogic evel (gold): 0.VA maximum @ 28V AC/C maximum (Applicable Range 0.mA ~ 0.A @ 20mV ~ 28V)
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT ONE POLE TWO POLE Basic P/N Terminal
More informationSubminiature Basic Switch
Subminiature Basic Switch Subminiature Basic Switch Offers Long Life and High Reliability A design that combines simplicity and stability by the use of two split springs ensures a long durability of 30,000,000
More informationHigh sensitivity. Low current load type. type. Short plunger ~ Fine plunger ~ ~ Lever ~ Roller lever ~ Short roller lever ~
6 BZ, BA, BE Series Specifications Standard Basic Switches FEATURES These Switches are Used Extensively and Have Earned the High Respect of Our Customers. Standard basic switches (BZ, BA, BE Series) are
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-22710/15H 20 April 2001 SUPERSEDING MIL-S-22710/15G 29 March 1985 PERFORMANCE SPECIFICATION SHEET SWITCHES, CODE INDICATING WHEEL (PRINTED CIRCUIT), (THUMBWHEEEL SWITCH ASSEMBLY, SEALED
More informationL-Series Sealed Rocker Switches
L-Series Sealed Rocker Switches L-Series Sealed Rocker Switches Making the right connections has never been easier with the L-Series Rocker Switch from Carling Technologies. Not only does this innovative
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): A @ 25/250V AC or A @ 30V C ogic evel (gold): 0.VA maximum @ 28V AC/C maximum (Applicable Range 0.mA ~ 0.A @ 20mV ~ 28V)
More informationC ole Instrument Corporation is proud to offer a rotary switch
IP3900 & IS3900 series C ole Instrument Corporation is proud to offer a rotary switch with illumination through the end of the shaft front. This can be used to light up any part of the rotary switch s
More informationGeneral Specifications
Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum
More informationINDUSTRIAL CONTROLS. Description. Products & features. Specifications. Illuminated or non-illuminated pushbutton switches.
INDUSTRIAL CONTROLS E A01 SERIES Panel cut-out.630" (16mm) Description Products & features Specifications Illuminated or non-illuminated pushbutton switches Indicators Rotary lever switches eylock switches
More informationDistinctive Characteristics
Standard Size Pushbuttons istinctive Characteristics Carefully designed light diffusion and filtering system produces bright, full surface illumination with front panel relamping. Spot illumination available
More informationFuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
More informationCIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationSingle Pole Circuit Protectors 55. Multi-Pole Circuit Protectors 56. Configurations 58. Operating Characteristics 59.
Single Pole Circuit Protectors 55 Multi-Pole Circuit Protectors 56 Configurations 58 Operating Characteristics 59 Delay Curves 60 Specifications 61 Decision Tables 62 SINGLE POLE CIRCUIT PROTECTORS The
More informationC&K EP Series Sealed Tiny Pushbutton Switches
Models Available Features/enefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available Typical Applications
More informationPCB Relay. Contact form Terminals Coil terminals Rated voltage Model SPST-NO #250 tab terminals PCB terminals 5, 12, 24 VDC G4A-1A
PCB Relay Miniature Single-pole Relay with 80-A Surge Current and 20-A Switching Current Ideal for motor switching. Miniature, relay with high switching capacity built-in applications. Creepage distance
More informationA02 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm)
PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm) E A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + one or two
More informationSealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
More informationFunctions The Series 19 incorporates the following functions: Indicator Pushbutton Illuminated pushbutton
Edition 11/2013 HMI-Components 19 Series Characteristics The compact 8 mm Series 19 is especially suited for: Raised design PCB (with adaptor) The low level switching element is laid out for low current
More informationAC Contactors. Type IC5181. Ward Leonard Electric Company Inc. 401 Watertown Road Thomaston, CT USA Tel:
Specification MIL-C-2212 Application Motor control, heater and tungsten lamp switching. Type Select standard type (IC5181C) or quiet type (IC5181D) when control is to meet standard MIL-C-740. All quiet
More informationMiniature Switches & Pilot Devices
A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and
More informationLighted Pushbutton Switch
Lighted Pushbutton Switch General Purpose and Micro-Voltage/Current Load Switch Requires only 22 mm mounting depth All LEDs, lamps, legends and pushbutton units replaceable without tools Oil-resistant
More informationET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
More informationSeries R19. Power Rocker Switches MARK OPTIONS COLOR OPTIONS TERMINATION OPTIONS HOW TO ORDER
CONTACT RATING: 6A 250VAC 10A 125VAC. ELECTRICAL LIFE: 10,000 Operations. MECHANICAL LIFE: 50,000 Operations. CONTACT RESISTANCE: 1,000M-ohms. DIELECTRIC STRENGTHS: >1,500
More informationD2SW-AQ. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend
Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal ) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive
More informationET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
More informationSeries 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
More informationTF2 Series Miniature Snap-acting Switches
Miniature Snapacting Switches Features/Benefits Broad range of operating forces Ratings up to 10 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor controls Thermostatics
More informationGeneral Specifications
Series YB Short Body Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C
More informationDETAIL SPECIFICATION SHEET
INCH-POUND 30 June 2014 SUPERSEDING MIL-DTL-16377/53C 27 September 2005 DETAIL SPECIFICATION SHEET FIXTURES, LIGHTING; INCANDESCENT AND LIGHT EMITTING DIODE (LED), DETAIL LIGHTING, LANTERN, HAND, PORTABLE
More informationDistinctive Characteristics
Distinctive haracteristics arefully designed light diffusion and filtering system produces bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
More informationSeries AV. Pushbutton Switches NUT O-RING HOW TO ORDER
Pushbutton Switches SPECIFICATIS: BUSHING: 22mm. CTACT RATING: 2A @ 48VDC or 125VAC. ELECTRICAL LIFE: 10,000cycles at full load. CTACT RESISTANCE: 10m-ohms max. initial @2-4VDC. INSULATI RESISTANCE: 1,000M-ohms
More information9000 Series Power Rocker and Lever Handle Switches
Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off
More informationPERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, PLUNGER, 10 AMPERES 2PDT AND 7 AMPERES 4PDT, RESILIENT SEAL
INCH-POUND MIL-PRF-8805/100G 6 December 2012 SUPERSEDING MIL-PRF-8805/100F 4 October 2004 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, PLUNGER, 10 AMPERES 2PDT AND 7 AMPERES 4PDT, RESILIENT SEAL
More informationGeneral_technical_data Series
Slow-make switching element Switching system The double-break, slow-make switching element is equipped with one or two independent contact systems, acting as normally open or normally closed contact. The
More informationET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
More informationC&K 8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Models Available Features/enefits Positive tactile feel Multi-positions available Wide variety of termination options Typical Applications Instrumentation Computer peripherals
More informationDIM. A (+ 0,05 0,51) .437 ±.020 (11,10 ± 0,51) DIM. F ±.015 (0,38) INTEGRAL ASSEMBLY NUT, DO NOT REMOVE
Multi-Deck SERIES,, and " Diameter, Amp, Standard, Military SR0 FEATURES Rugged Construction Insures Switch Operation for the Life of Your Equipment Many Circuitry Options MIL Qualified Versions MIL-S-/0
More informationOrdering Information. General-purpose Basic Switch X. Direct Current Switch with Built-in Magnetic Blowout. Model Number Legend
General-purpose Basic Switch X Direct Current Switch with Built-in Magnetic Blowout Incorporates a small permanent magnet in the contact mechanism to deflect the arc to effectively extinguish it. Ideal
More informationHMI Components. Series. Indicator Illuminated pushbutton Mushroom-head pushbutton Key lock switch
Edition 10/2016 HMI Components Series Characteristics The compact Series is especially suited for: Flush design The large rectangular design (24x36mm) features a large illuminated area. Functions The Series
More informationA3S. Pushbutton Switch Series with Square 40-mm Body. Lighted Pushbutton Switch (Square) List of Models
Lighted Pushbutton Switch (Square) CSM DS_E_7_ Pushbutton Switch Series with Square 40-mm Body Combines miniature design with distinct but soft sense of operation. Easy panel mounting from the front and
More informationC&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
More informationFeatures Metal shaft and bushing Consistent, smooth quality feel Up to 4 sections available Rotary switch option designed for on-off function control
*RoHS COMPLIANT VERSIONS AVAILABLE Features Metal shaft and bushing Consistent, smooth quality feel Up to sections available Rotary switch option designed for on-off function control RoHS compliant versions
More informationSelection guide - Section B1 «I» range
Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1
More information7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
More informationControl & Signalling Devices 22.5 mm. RoHS. Compliant
Control & Signalling Devices 22.5 mm RoHS Compliant Contents Characteristics General Characteristics Products Push Buttons, Selector Switches, Latching Mushroom Head Push Buttons, Pilot Lights & Illuminated
More informationEnclosed Switch. Ordering Information. Economical, High Utility Enclosed Switch. Model Number Legend D4MC- List of Models
Enclosed Switch Economical, High Utility Enclosed Switch High precision and long life (10,000,000 mechanical operations) through employment of the moving spring used in OMRON Z Basic Switch. Sealed with
More information7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
More information9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
More informationTABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.
This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the
More information