Features Metal shaft and bushing Consistent, smooth quality feel Up to 4 sections available Rotary switch option designed for on-off function control
|
|
- Letitia Snow
- 5 years ago
- Views:
Transcription
1 *RoHS COMPLIANT VERSIONS AVAILABLE Features Metal shaft and bushing Consistent, smooth quality feel Up to sections available Rotary switch option designed for on-off function control RoHS compliant versions available* 8/8-5/8 Square Single-Turn Panel Control 85/86-5/8 Square Single-Turn Panel Control with Rotary Switch Potentiometer Specifications Initial Electrical Characteristics Conductive Plastic Element Cermet Element Standard Resistance Range Linear Tapers (A, B, E, & H)...(B & E) K ohms to megohm...(a & H) 00 ohms to megohm Audio Tapers (C, D, F, G, S, & T)...(D, G, S, & T) K ohms to megohm...(c & F) K ohms to megohm Total Resistance Tolerance...±0 % or 0 %...±0 % or 5 % Independent Linearity...±5 %...±5 % Absolute Minimum Resistance... ohms maximum... ohms maximum Effective Electrical Angle...(Linear tapers) 0 ± 5...(Linear tapers) 0 ± 6 (Audio tapers) 5 ± 5 (Audio tapers) 5 ± 6 Contact Resistance Variation...± %...± % or ohms (whichever is greater) Dielectric Withstanding Voltage (MIL-STD-0, Method 0) Sea Level...,500 VAC minimum...,500 VAC minimum 70,000 Feet VAC minimum VAC minimum Insulation Resistance (500 VDC)...,000 megohms minimum...,000 megohms minimum Power Rating At 70 C (Voltage Limited By Power Dissipation or 50 VAC, Whichever Is Less) +70 C Single Section Assembly...(Linear tapers) 0.5 watt...(linear tapers) watts (Audio tapers) 0.5 watt (Audio tapers) watt +70 C Multiple Section Assembly...(Linear tapers) 0.5 watt/section...(linear tapers) watt/section (Audio tapers) 0.5 watt/section (Audio tapers) 0.5 watt/section +5 C...0 watt...0 watt Theoretical Resolution...Essentially infinite...essentially infinite Environmental Characteristics Operating Temperature Range...-0 C to +5 C...-0 C to +5 C Storage Temperature Range C to +5 C C to +5 C Temperature Coefficient Over Storage Temperature Range...±,000 ppm/ C...±50 ppm/ C Vibration (Single Section)...5 G...5 G Total Resistance Shift...± % maximum...± % maximum Voltage Ratio Shift...±5 % maximum...±5 % maximum Shock (Single Section)...0 G...0 G Total Resistance Shift...± % maximum...± % maximum Voltage Ratio Shift...±5 % maximum...±5 % maximum Load Life...,000 hours...,000 hours Total Resistance Shift...±0 % maximum...±5 % maximum Rotational Life (No Load)...00,000 cycles...00,000 cycles Total Resistance Shift...(Linear taper) 0 ohms or ±0 % TRS max..(all tapers) ±5 % TRS maximum (whichever is greater) (Audio taper) ±0 % maximum Contact Resistance 50,000 cycles (Audio taper)...± %...± % (Linear taper)...± %...± % Moisture Resistance (MIL-STD-0, Method 0, Condition B) Total Resistance Shift...(B & E tapers) ±0 % maximum...±5 % maximum (all tapers) (D, G, S & T tapers) ±0 % maximum Insulation Resistance (500 VDC)...00 megohms minimum...00 megohms minimum IP Rating...IP 0...IP 0 Mechanical Characteristics Stop Strength / and /8 diameter shafts N-cm ( lb.-in.) 7/8 length shaft...6 N-cm ( lb.-in.) Mechanical Angle...00 ±5 Torque Starting and Running Torque (Non-Locking Bushings) Single Section...0. to.06 N-cm (0. to.5 oz.-in.) Dual Section...0. to.06 N-cm (0. to.5 oz.-in.) Triple Section to. N-cm (0.5 to.0 oz.-in.) Quadruple Section to. N-cm (0.5 to.0 oz.-in.) Starting and Running Torque (Locking Bushings)...0. to.8 N-cm (0. to.0 oz.-in.) Shaft Locking Torque with 0 in-lb. (B & E Bushings)... N-cm (0 oz-in.) Mounting N-m (5-8 lb.-in.) maximum Weight (Single Section)... grams maximum (Each Additional Section)...6 grams maximum Terminals...Printed circuit terminals or J-Hooks Soldering Condition...Recommended hand soldering using Sn95/Ag5 no clean solder, 0.05 wire diameter. Maximum temperature 99 C (750 F) for seconds. No wash process to be used with no clean flux. Marking...Manufacturer s trademark, wiring diagram, date code and resistance, manufacturer s part number Ganging (multiple section potentiometers)... cup maximum Hardware...One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number. For dimensional drawings see pages &. NOTE: Model 8/8 performance specifications do not apply to units subjected to printed circuit board cleaning procedures. For ordering information see page 5. At room ambient: +5 C nominal and 50 % relative humidity nominal, except as noted. *RoHS Directive 00/95/EC Jan 7 00 including Annex
2 8/8-5/8 Square Single-Turn Panel Control 85/86-5/8 Square Single-Turn Panel Control with Rotary Switch Rotary Switch Specifications Initial Electrical Characteristics Contacts: DPST...N.O/N.O.,N.C./N.C. or N.O./N.C. DPDT... N.O./N.C. (break before make) Power Rating (Resistive Load): DPST... 5 volts RMS-60 Hz or 8 VDC, 50 volts RMS-60 Hz DPDT... 5 volts RMS-60 Hz or 8 VDC Contact Resistance (0. VDC-0 ma)...0 milliohms nominal Contact Bounce...5 milliseconds maximum Dielectric Withstanding Voltage (MIL-STD-0, Method 0) Sea Level VAC minimum Insulation Resistance megohms minimum Environmental Characteristics Operating Temperature Range...0 C to +70 C Storage Temperature Range C to +5 C Vibration (Dual Section)...8 G (Triple Section)...5 G (Quadruple Section)... G Contact Resistance...0 milliohms maximum Contact Bounce...0. millisecond maximum Shock (Dual Section)...0 G (Triple Section)...5 G (Quadruple Section)...0 G Contact Resistance...0 milliohms maximum Contact Bounce...0. millisecond maximum Rotational Life...5,000 cycles Switch Actuating Torque (50% Duty Rated Power Load)... to.9 N-cm ( to 7 oz.-in.) Contact Resistance...00 milliohms maximum Moisture Resistance (MIL-STD-0, Method 06, Condition B) Contact Resistance (0. VDC-0 ma)...0 milliohms maximum Insulation Resistance (After Room Temperature) (500 VDC)...00 megohms minimum Switch Housing Material...High temperature, flame retardant, thermosetting plastic Mechanical Characteristics Actuating Torque (Each Section, Switch Module Only)...5 to 0.6 N-cm (5 to 5 oz.-in.) Running Torque (Out of Detent, - Module Assembly)...0. to. N-cm (0. to oz.-in.) Detent...CW or CCW standard Actuation Angle...5 Contact Materials...Fine silver with gold overlay Terminal Styles...Solder lug only Standard Orientation...In-line with control terminals Optional...Rotated 90 CCW from standard Terminal Strength (Before and After Soldering Heat Exposure) Kg ( lbs.) minimum NOTE: Model 8/8 performance specifications do not apply to units subjected to printed circuit board cleaning procedures. At room ambient: +5 C nominal and 50 % relative humidity nominal, except as noted.
3 8/8-5/8 Square Single-Turn Panel Control Product Dimensions "A" Bushing /8 " (9.5 mm) Dia. Plain - Single Shaft "B" Bushing /8 " (9.5 mm) Dia. Plain - Single Shaft "C" Bushing / " (6.5 mm) Dia. Plain - Single Shaft 9.50 ±.8 (.75 ±.05) 7.9 (.) 9.5 ±. (.75 ±.005).7,5.88,9.05,.±.79 (/, 5/8, 7/8, ± /) /8- UNEF 6.5 ±.0 DIA. (/ ± /) SHAFT SLOT.9 WIDE X (.07).60+.8/-.00 ( /-.000).5 5 ±5 X (.00) CHAMFER 5.9 OPTIONAL FLAT 6.00 LONG OR.5 FROM (.6) (.6) (.06) "A" BUSHING END FOR SHAFTS UNDER 7.6 (/6).70 ±. (.500 ±.005) /8- UNEF. (.8) 9.5 ±. (.75 ±.005) 5.88 ±.79 (5/8 ± /) SHAFT SLOT.9 WIDE X (.07) /-.00 ( /-.000) 6. ±.0 (.9 ±.00) DIA..5 5 ±5 X CHAMFER (.00) 6.5 ±. (.50 ±.005).5 (.75) 6.5 ±.05 (.50 ±.00) /- UNEF 9.5,.7,5.88,9.05,. ±.79 (/8, /, 5/8, /, 7/8, ± /).6 ±.05 (.5 ±.00) DIA. SHAFT SLOT.79 WIDE X (.0).79 ±.5 (.0 ±.00).5 5 ±5 X CHAMFER (.00).9 ±. OPTIONAL FLAT 6.5 LONG OR.5 FROM (.09 ±. 005) (.50) "C" BUSHING END FOR SHAFTS UNDER.0 (.06) (9/6) "E" Bushing / " (6.5 mm) Dia. Locking - Single Shaft "A" Bushing /8 " (9.5 mm) Dia. Plain - Concentric Shaft "C" Bushing / " (6.5 mm) Dia. Plain - Concentric Shaft.7 ±. (.500 ±.005) 5.88 ±.79 (5/8 ± /).8 ±.0 (.5 ±.00) DIA ±.79 (-/8 ± /) 9.05 ±.79 (/ ± /).75 (9.5) 6. ±.0 (.9 ±.00) DIA..6 ±.05 (.5 ±.00) DIA ±.79 (5/8 ± /) 5.0 ±.79 ( ± /) 6.5 (.5).98 ±.0 (.078 ±.00) DIA. /- UNEF 0.80 (.5) 6.5 ±.05 (.50 ±.00) SHAFT SLOT.78 WIDE X.78 ±.0 (.0) (.0 ±.00).5 5 ±5 X (.00) CHAMFER /8- UNEF TRIPLE CONCENTRIC (SPECIAL ORDER).98 ±.0 (.078 ±.00) DIA. OUTER SHAFT 7.7 DIA. OPERATES SECTION # INNER SHAFT.8 (.9) (.5) DIA. OPERATES SECTION #, #, & # ("G" STYLE) /- UNEF.6 ±.05 (.5 ±.00) DIA. OUTER SHAFT.8 DIA. OPERATES SECTION # INNER SHAFT.078 (.5) (.95) DIA. OPERATES SECTION #, #, & # ("G" STYLE) "S" Bushing 0 mm Dia. Locking - Single Shaft.50 ± 0.8 (.9 ±.05).00 ± 0.79 (.866 ±.0).0 ± 0.0 SHAFT SLOT (.00 ±.00).80 ± 0.5 WIDE X (.07 ±.00) DIMENSIONS ARE: MM (INCHES) CCW POTENTIOMETER M0 x g 0.9 (.0) / DIA. ( /-.00).5 5 ±5 X CHAMFER (.00) 9.90 (.90)
4 8/8-5/8 Square Single-Turn Panel Control Product Dimensions (Continued) Dual Unit - PC Pins & J-Hook Triple Unit - PC Pins & J-Hook Quad Unit - PC Pins & J-Hook 6.0 ±.79 (.05 ±.0) 6.0 ±.9 (.5 ±.07) 6.6 ±.9 (.85 ±.07) 0.6 ±.8 (.00 ±.05) 0.6 ±.8 (.00 ±.05) TYP. 0.6 ±.8 (.00 ±.05) TYP. Model 8/8 Single Unit - PC Pins & J-Hook 5.88 ±. (.65 ±.06) 5.88 ±.8 (.65 ±.05).9 (.70) 5.97 ±.8 (.5 ±.05) 5.08 ±.8 (.00 ±.05).7 (.50) 9.58 ±.8 (.77 ±.05) 5.88 ±.8 (.65 ±.05) 5. ±.76 (.0 ±.0).8 MAX. PLCS. (.50).8 (.0) DIA ±.8 (.00 ±.05) Terminal outlines shown as solid lines represent PC Pins, available on Model 8. Dashed line terminal outline represents "J" Hook, available on Model 8. Model 8 Suggested PC Board Layout - PC Pins (Single-Shaft Style Bottom View) 5.08 ±. (.00 ±.005). (.05) DIA. 0.6 ±. (.00 ±.005) Note: For units with dual concentric shaft styles, a.00 (.5) spacer is added between the module(s) driven by the outer shaft and those driven by the inner shaft. For G, K, or V shafts, add the spacer between modules and. For L or M shafts, add the spacer between modules and. For N or P shafts, add the spacer between modules and ±. (.00 ±.005) Shaft Flat Orientation* 0 ± 5 CCW END FLATTED SHAFT 0 ±5 SLOTTED SHAFT *EXCLUDES MODELS 8 AND 8 DIMENSIONS ARE: MM (INCHES)
5 85/86-5/8 Square Single-Turn Panel Control with Rotary Switch Product Dimensions Primary Potentiometer Module Secondary Potentiometer Module Shaft Flat Orientation*.5 (.57) 9.58 ±.8 (.77 ±.05) 0.6 (.00) 5.88 (.65) 0 ± 5 CCW END 0 ± (.00) 8.56 (.7).7 (.50) 5.97 (.5) 8.56 (.7) (.06) (.00) 5.88 (.65) 5.08 (.00) FLATTED SHAFT SLOTTED SHAFT *EXCLUDES MODELS 8 AND 8 Switch Module REAR PLATE COVER.5 (.05).77 (.09).9 (.090) TYP. 6 PLACES Assembly Sequence Secondary Potentiometer Module 5.88 (.65) REF..75 (8.) 5 6. (.095) L X. (.05) W.9 (.5) SLOT TYP. 6 PLACES 9.5 (.75) REAR COVER PLATE SWITCH MODULE PRIMARY POTENTIOMETER MODULE NOTE: Switch terminals shown in vertical position. DPST (NO/NC) DPST (NC/NC) DPST (NO/NO) (TYPES 50, 5, 56, 57) (TYPES 5, 55, 60, 6) (TYPES 5, 5, 58, 59) Switch contacts shown in detent position. 5 6 DPDT (NC/NC) (TYPES 70, 7, 7, 7) Locating Lug Options - All Model 80 Series.6 (.08) A 7.75 (.05) E.9 (.5) J 9.5 (.75) H.0 (.7) E =.6 ±.76 H & J =.98 ±. (.09 ±.0) (.078 ±.06).79 ±. (.0 ±.06). (.09).8 (.5).6 (.09) NOTE: "D" OPTION - NO A/R LUG. OTHER LOCATING LUG OPTIONS AVAILABLE. FOR DETAILS CONSULT FACTORY..8 (.5) DIMENSIONS ARE: MM (INCHES).7 TOLERANCES EXCEPT AS SHOWN: DECIMAL.XXX ± (.005).XX ±.8 (.05) ANGLE ± 5 %
6 8/8-5/8 Square Single-Turn Panel Control 85/86-5/8 Square Single-Turn Panel Control with Rotary Switch How to Order 8 A A - B 8 - A 5 / A 5 L Models 8 & 8: Part number for multiple section potentiometers must have a taper and resistance value for each section. 85 A A - B 8 - A 5 / R5 L Models 85 & 86: Part number must contain a switch type. A B C D E F J K ANTI-ROTATION LUG Single.05 R, 90 CW Double.05 R, 90 & 70 CW Single.05 R, 70 CW No Lug Single.5 R, 90 CW Single.05 R, 80 CW Single.75 R, 90 CW Double.75 R, 90 & 70 CW # SECTIONS APPLICABLE MODELS Single 8,8 Double 8,8,85,86 Triple 8,8,85,86 Quad 8,8,85,86 BUSHING A Plain /8 (9.5 mm) D x /8 (9.65 mm) L B Locking /8 (9.65 mm) D x / (.7 mm) L C Plain / (6.5 mm) D x / (6.5 mm) L E Locking / (6.5 mm) D x / (.7 mm) L J Plain /8 (9.65 mm) D x / (6.5 mm) L N Plain / (6.5 mm) D x /8 (9.65 mm) L R Plain 0 mm D x 9 mm L S Locking 0 mm D x.5 mm L U Plain 7 mm D x 6 mm L MODEL 8 Single-Turn, PC Pins 8 Single-Turn, J-Hooks 85 Single-Turn, Pot/Rotary Switch, PC Pins 86 Single-Turn, Pot/Rotary Switch, J-Hooks SHAFT AVAILABLE LENGTH ONLY IN (FMS) BUSHING Code Description Code /8 L C, N, J 6 / L A, C, J, N 0 5/8 L A, B, C, E, J, N / L A, B, C, E, J, N 8 7/8 L A, B, C, E, J, N L A, B, C, E, J, N 6 -/8 L A, B, C, E, J, N 0 -/ L A, B, C, E, J, N METRIC 0 0 mml U mml U 6 6 mml R, S 9 9 mml R, S mml R, S, U 0 0 mml R, S mml R, S mml R, S AVAILABLE ONLY IN SHAFT TYPE LENGTHS BUSHINGS (CODE) (CODE) A Single Plain / (6.5 mm) D 6,0,,8 A, B, J B Single Slotted / (6.5 mm) D 6,0,,8 A, B, J C Single Flatted / (6.5 mm) D 0,,8 A, B, J E Single Slotted /8 (.8 mm) D,6,0,,8 C, E, N F Single Flatted /8 (.8 mm) D C, N G Dual Concentric Plain / (6.5 mm) D - /8 (.8 mm) D 6,0 A, J Outer Operates Section K Dual Concentric Plain /8 (.8 mm) D - 5/6 (.98 mm) D,6 C, N Outer Operates Section L Dual Concentric Plain / (6.5 mm) D - /8 (.8 mm) D 6,0 A, J Outer Operates Section / M Dual Concentric Plain /8 (.8 mm) D - 5/6 (.98 mm) D,6 C, N Outer Operates Section N Dual Concentric Plain / (6.5 mm) D - /8 (.8 mm) D 6,0 A, J Outer Operates Section // P Dual Concentric Plain /8 (.8 mm) D - 5/6 (.98 mm) D,6 C, N Outer Operates Section / R Single Slotted 6 mm D 6,9,,50 R, S T Single Slotted mm D 0,, U V Dual Concentric Plain 6 mm D - mm D 0, R Outer Operates Section RoHS IDENTIFIER L Compliant Blank Non-Compliant SWITCH TYPE (MODELS 85 & 86 ONLY) (R50) DPST N.O./N.C. CW Detent In-Line Term (R5) DPST N.O./N.C. CCW Detent In-Line Term (R5) DPST N.O./N.O. CW Detent In-Line Term (R5) DPST N.O./N.O. CCW Detent In-Line Term (R5) DPST N.C./N.C. CW Detent In-Line Term (R55) DPST N.C./N.C. CCW Detent In-Line Term (R56) DPST N.O./N.C. CW Detent Horz Term (R57) DPST N.O./N.C. CCW Detent Horz Term (R58) DPST N.O./N.O. CW Detent Horz Term (R59) DPST N.O./N.O. CCW Detent Horz Term (R60) DPST N.C./N.C. CW Detent Horz Term (R6) DPST N.C./N.C. CCW Detent Horz Term (R70) DPDT CW Detent In-Line Term (R7) DPDT CCW Detent In-Line Term (R7) DPDT CW Detent Horz Term (R7) DPDT CCW Detent Horz Term ELEMENT TYPE RESISTANCE CODE TAPER/TOLERANCE VALUE IN OHMS (A) Linear Cermet ±0 % (05) - 00 (0) - 5 K (H) Linear Cermet ±5 % (8) - 50 (6) - 0 K (06) - 00 (7) - 5 K (07) - 50 (8) - 50 K (08) (9) - 75 K (09) (0) - 00 K (0) - K () - 50 K (9) -.5 K () - 00 K () - K () - 50 K () -.5 K () K () - 5 K () K () K (5) - M (5) - 0 K (B) Linear C-P ±0 % (0) - K (8) - 50 K (E) Linear C-P ±0 % () -.5 K (0) - 00 K () - 5 K () - 50 K (5) - 0 K () K (6) - 0 K (5) - M (7) - 5 K (C) CW Audio Cermet ±0 % (0) - K (8) - 50 K (D) CW Audio C-P ±0 % () -.5 K (0) - 00 K (F) CCW Audio Cermet ±0 % () - 5 K () - 50 K (G) CCW Audio C-P ±0 % (5) - 0 K () K (S) CW Audio C-P ±0 % (7) - 5 K (5) - M (T) CCW Audio C-P ± 0 % (8) - 50 K Boldface features are Bourns standard options. All others are available with higher minimum order quantities. REV. 0/09
ELUMILED.COM. Model 91, 92, 93, 94 & 95-5/8 Square Single-Turn Panel Control
*ohs COMPLIANT VESIONS AVAILABLE Features Available in a variety of pin-out configurations Virtually infinite electrical circuit isolation Metal or plastic shaft options ohs compliant versions available*
More informationn Available in a variety of pin-out configurations
*ohs COMPLIANT Features n Available in a variety of pin-out configurations n Virtually infinite electrical circuit isolation n Metal or plastic shaft options n ohs compliant* Model 91, 9, 93, 94 & 95-5/8
More informationmm Square Sealed Panel Control
*RoHS COMPLIANT Features Conductive plastic PC board and bushing mount Plastic or metal bushing and plastic shaft Withstands typical industrial washing processes Compact package saves board and panel space
More informationmm Square Sealed Panel Control
*RoHS COMPLIANT Features n Conductive plastic n PC board and bushing mount n Plastic or metal bushing and plastic shaft n Withstands typical industrial washing processes n Compact package saves board and
More informationSeries S127B Potentiometer 1/2" (12.7mm) Square
Series S17 Potentiometer 1/" (1.7mm) Square Features: Stackable - up to modules onductive Plastic or ermet Resistance lement Linear, W or audio Taper Metal Shaft and ushing Description: The Series S17
More informationSeries 308 Electrical Specifications
Series 38 Potentiometer 1/2 in. sq..5 Watt Series 39 Potentiometer 1/2 in. sq. 1. Watt Description The Series 38 and 39 are high-performance, low-cost potentiometers. They are also available with S.P.S.T.
More informationPrecision Potentiometers
Precision Potentiometers w w w. b o u r n s. c o m I. Product Selection Guide...58 II. Potentiometers Multiturn...60 Single-Turn...65 Knobpot...70 Pushbutton (Digital Readout)...7 III. Definitions & Test
More information30mm Diameter, Single-Turn, Wirewound Industrial Panel Controls RA30YME RA30YD RA30Y
TOCOS PANEL CONTROLS 30mm Diameter, Single-Turn, Wirewound Industrial Panel Controls RA30YME RA30YD RA30Y Features 30mm diameter, single-turn industrial panel controls Wirewound element Linear or audio
More informationSeries 70 Custom Potentiometer Designer Guide
Series 70 Custom Potentiometer Designer Guide.05 [0.8mm] /8 [.8mm].50 [6.5mm].055 [.7mm] 6 ROUTE 0, STE 6 EST HNOVER NEW JERSEY 0796 Phone Internet POT PROTOTYPES PRONTO! Dual Potentiometer, Dual Rotary
More information24mm Diameter, Single-Turn, Carbon Industrial Panel Controls
TOCOS PANEL CONTROLS 24mm Diameter, Single-Turn, Carbon Industrial Panel Controls RV24YN RV24YGME RVT24YN Features 24mm diameter, single-turn industrial panel controls Carbon film element Linear or audio
More informationRotary Potentiometer. 1/2 Watt, Composition. Electrocomponents. Industrial 24mm Diameter. Rotary Potentiometer. Features
Electrocomponents Series 450 Data Sheet Rotary Potentiometer Industrial 4 Diameter 1/ Watt, Composition Rotary Potentiometer Features - Bushing - Twist or Bend Tab - Snap-in PC Bracket - PC Terminal Electrical
More informationSection 26: Capacitors, Resistors, Potentiometers, Trimmers. Capacitors Resistors Potentiometers Trimmers...
Section 26: Capacitors, Resistors, Potentiometers, Trimmers Sub-Section Page Capacitors.....................................................680 Resistors......................................................681
More information1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometers
, /" 7 mm Conductive Plastic and Cermet FEATURES Robust construction High rotational life cycles Up to three sections PC support plates Rotary switches and solder lugs terminals available Compliant to
More informationSecurity Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter
Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless
More informationSeries 70 Custom Potentiometer Designer Guide
Series 70 ustom Potentiometer Designer Guide.05 [0.8mm] /8 [.8mm].50 [6.5mm].055 [.7mm] 6 ROUTE 0, STE 6 EST HNOVER NEW JERSEY 0796 Phone 97-887-550 Toll Free -800-6-808 Fax 97-887-90 Internet http://www.potentiometers.com
More informationor 0.5Ω whichever is greater (152 only) Temperature Coefficient of Resistance MODEL 152 MODEL 159 Refer to standard
Model 152, 159 FEATURES Rugged, High-Quality, All Metal Housing Short Length Behind Panel (11/32 ) Choice of Two Elements for Broad Resistance Range- 5Ω to 2MΩ No Glued Joints Extra Taps AVAILABLE High
More information1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer FEATURES Robust construction High rotational life (50 000 cycles) Up to three sections PC support plates Rotary switches and solder lugs terminals
More informationDIM. A (+ 0,05 0,51) .437 ±.020 (11,10 ± 0,51) DIM. F ±.015 (0,38) INTEGRAL ASSEMBLY NUT, DO NOT REMOVE
Multi-Deck SERIES,, and " Diameter, Amp, Standard, Military SR0 FEATURES Rugged Construction Insures Switch Operation for the Life of Your Equipment Many Circuitry Options MIL Qualified Versions MIL-S-/0
More informationTemperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance
.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature Range Temperature
More informationSeries 206/208 Through-Hole DIP Switch
Available with SPST, SPDT, DPST, 3PST circuitry choices Available with low profile, standard, or extended actuator heights. Consult the ordering information for options. RoHS compliant Optional top tape
More informationSeries 270. Commercial Miniature 5/8" (16mm) Diameter Composition Variable Resistors. Electrical and Mechanical Specifications.
Series 270 Commercial Miniature 5/8" (16mm) Diameter Composition Variable Resistors Miniature 5/8" (16mm) size Versatile mounting styles: bushing twist tab bend tab snap-in PC bracket solder lug or PC
More informationOW20BU/B4PC1S OW20BU/N4PC1S-CH *
OW20BU/B4PC1S OW20BU/N4PC1S-CH * B4OW1S N4PC1S 4 Amp Single Pole Switch CH Change Over (Double Throw) OW Ordinary Wiring (recommended for soldering) PC For Printed Circuit * Representative of range: Switch
More informationSingle Turn Rotary Wirewound Potentiometers
Single Turn Rotary Wirewound Potentiometers THE POTENTIOMETER SPEILISTS QD & QDD Series 1.328" Diameter, 3 watts, Single or Dual Module... pg. 2 Suggested replacement for Honeywell R20 and 43-Series QE
More information1/4" Square Single-Turn Cermet Sealed Trimmer
/4" Square Single-Turn Cermet Sealed Trimmer FEATURES Industrial grade Fully sealed Miniature package Rotor designed for automatic machine adjust interface Withstands harsh environments and immersion cleaning
More informationSwitches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
More informationDistinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
More informationM Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
More informationT he Cole Series S3900 miniature P.C. termination rotary switch
S3900 series T he Cole Series S3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,
More informationCustom Potentiometer Designer Guide
Custom Potentiometer Designer Guide.015 [0.38mm] 1/8 [3.18mm].250 [6.35mm].055 [1.47mm] 36 Route 10 East Hanover New Jersey 07936 Phone POT PROTOTYPES PRONTO! Now almost any special combination potentiometer
More information1/4" Square Single-Turn Cermet Sealed Trimmer
/4" Square Single-Turn Cermet Sealed Trimmer FEATURES Industrial grade Fully sealed Miniature package Rotor designed for automatic machine adjust interface Withstands harsh environments and immersion cleaning
More informationMetal Alloy Low-Resistance Resistor Specifications
Page 1 of 14 Metal Alloy Low-Resistance Resistor Specifications March 2010 Specification Number:GCT-SPEC-011-11 Issued Date:2010/03/01 Page 2 of 14 1. Scope: 1.1 This specification is covered following
More informationTemperature Coefficient of Resistance, Tracking Maximum Operating Voltage
627, 628 Series.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor etworks RoHS Compliant ELECTRICAL Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature
More informationScheda prodotto Relè Series E
Relè Miniatura All-or-Nothing relays ideally suited for any electronic appliances demanding very compact design and low power consumption. Design includes a protective dust cover and a completete range
More informationT he Cole Series P3900 miniature P.C. termination rotary switch
P3900 series T he Cole Series P3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,
More information305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
More informationPOTENTIOMETERS ENCODERS & CODED SWITCHES TP/RH7& TP/RH9.
POTENTIOMETERS ENCODERS & CODED SWITCHES TP/RH7& TP/RH9 www.tocos.com We are TOCOS TOCOS America, Inc. is a wholly owned subsidiary of Tokyo Cosmos Electric Co., Ltd. ( TOCOS), a worldwide supplier of
More informationHigh-force: 230 g. Projected 7.3 mm General-purpose: 160 g. High-force: 230 g. Flat 4.3 mm General-purpose: 200 g.
Tactile Switch BW Tactile Switch with Sealed Construction for Automatic Soldering Sealed construction conforming to IP67 (IEC-6059) provides high reliability in locations exposed to dust or water. Available
More informationSP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC)
DATA SHEET Order code Manufacturer code Description 75-0211 100-SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC) The enclosed information is believed to be correct, Information may change without notice
More informationXA16ECO/B1PC1S XA16ECO/B4PC1S
XA16ECO/B1PC1S XA16ECO/B4PC1S B4PC1S B1PC1S - 14 1 Amp Single Pole (Single Throw) Switch XA Terminals Bent Extra Long Toward Switch PC Printed Circuit Terminals This image shows the XA terminals located
More information9 mm Multi-Ganged Potentiometer
9 mm Multi-Ganged Potentiometer FEATURES Conductive plastic element Ultra compact (extra miniature module size) Multiple assemblies (up to seven modules) Shaft and panel sealed option Center mechanical
More informationProduct Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
More informationCIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationspectrasymbol.com Rev F3 - Page 1
Features - Linear Position Sensor - IP65 Dust Proof, Water Proof (Intense Spray) - Polyester Substrate - 3M Pressure Sensitive Adhesive (PSA) - Upon Request - Male or Female Nicomatic or Berg - Wiper of
More informationA Type Switch Assemblies. With Silver - Plated Brass Contacts and Solder Terminals
A Type 1 inch diameter switches with Electroswitch patented Unidex detent for positive action, feel and torque control. Double-wiping, self-cleaning contacts in silver plated brass, or silver alloy. Unique
More informationCRS-A Series High Power Anti-Surge Resistor
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*
More information341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
More informationRTBH Series 1-2 Pole Coded Rotary Switches
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
More informationSeries 388/389 Custom Potentiometer Designer Guide
Series 88/89 ustom Potentiometer Designer Guide.05 [0.8mm] /8 [.8mm].50 [6.5mm].055 [.7mm] 6 ROUTE 0, STE 6 EST HNOVER NEW JERSEY 0796 Phone 97-887-550 Toll Free -800-6-808 Fax 97-887-90 Internet POT PROTOTYPES
More information5 Series - Mechanical Latch 2PDT - 4PST, 30 Amps
5 Series - Mechanical Latch 2PDT - 4PST, 30 Amps The 5 series is a 2 coil mechanical latch electrical reset power relay. It is panel mounted with screw terminals, and has 600 volt spacing. The 5 series
More informationApplications. Car audio. Robo
Rotary Position Sensor High Rotational Life Type Features High Durability: 1M cycles Pb Free Soldering: 260 C Operating Temperature: -40 C to +85 C Terminal Shape: SMD Type and Lead Type Rotational Rotor:
More informationPower Panel 6 W Potentiometer
Power Panel 6 W Potentiometer FEATURES High power rating 6 W at 50 C Cermet element Full sealing Mechanical strength Industrial and professional grade Tests according to CECC 41000 or IEC 60393-1 Material
More informationPERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, SPDT, UNSEALED
INCH-POUND 14 June 2010 SUPERSEDING 22 May 2006 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, SPDT, UNSEALED This specification is approved for use by all Departments and Agencies of the Department
More informationRTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles Coded Switches Features/Benefits PCB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS Compliant Typical Applications
More informationANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
More informationScheda prodotto Relè Series B
Relè di Potenza All-or-Nothing Relays designed to meet high power switching applications with up to three changeover contacts, rated 4000 or 7500 VA - AC1. They are ideally suited for arduous duties where
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
More informationT Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More informationBENEFITS 782 STANDARD PART NUMBERS FEATURES 782 XDX M4L- 120A ORDERING CODE DPDT 10 AMP & 4PDT 3 & 5 AMP MINIATURE POWER RELAY FLAG INDICATOR:
SERIES 782XBX/XDX DPDT 10 AMP & 4PDT 3 & 5 AMP MINIATURE POWER RELAY FEATURES FLAG INDICATOR: L.E.D. STATUS LAMP: PUSH BUTTON: LOCK-DOWN DOOR: FINGER-GRIP COVER: I.D. TAG/WRITE LABEL: COVER ADAPTERS: BENEFITS
More informationB3F. Miniature, Space-saving Switch
B3F Miniature, Space-saving Switch Long mechanical / electrical service life Ideal for applications such as audio, office and communications equipment, TVs, etc Taped radial, vertical, high-force, and
More informationE Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
More informationAutomotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
More informationOptical and Mechanical. Encoders
Contents: OPTICAL ENCODERS Eliminates Rotary Mechanical Contacts Accurate Resolution up to 8 Positions Logic Compatible Selects Menu or Display Items Includes Data Input Switch Up to 0 Million Trouble-Free
More informationInterface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
More informationTHREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More information13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
More informationS J
1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V
More informationMomentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
More informationROTARY SWITCHES. Quality Features: LIGHTED ROTARY UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.
SWITCH R2 UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.83 PANEL CUTOUT Used in the heavy equipment, marine, process control and instrumentation markets the R2 rotary switch
More informationMYSTR ELEMENTS. % Eo/Ein % TRAVEL % TRAVEL. Examples of monotonic functions. Examples of non-monotonic functions TECHNICAL SPECIFICATIONS DIMENSIONS
MYSTR ELEMENTS Noise 0.03% output smoothness Accuracy Essentially infinite Independent and absolute linearity to ±0.05% V- V- Resistance-Temperature Characteristic Typically ±5% maximum change in total
More informationC&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
More informationTP Series, Tiny. Features. Pushbutton Switches. Pushbutton Switches
TP Series, Tiny Features Compact design Round or rectangular actuator buttons. Vertical or versions Typical performance characteristics Contact configuration........................ SPST, SPDT, DPDT Contact
More informationPushbutton Switches Sub-Miniature
Pushbutton Switches Specifications: Contact rating Mechanical life Maximum contact resistance Minimum insulation resistance Dielectric strength Operating temperature Materials: Case Plunger Bushing Housing
More informationPERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, 10 AMPERES AND LOW LEVEL, UNSEALED
INCH-POUND 2 January 201 SUPERSEDING 1 May 200 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, AMPERES AND LOW LEVEL, UNSEALED This specification is approved for use by all Departments and Agencies
More informationsmpm connectors DIVIDER PAGE
connectors DIVIDER PAGE 95 interfaces socket (adapter).068 MIN..023 CONTACT ACCEPTS.012 +/-.001 PIN x.050 LONG.110.095 CENTER CONTACT FLUSH TO.008 RECESSION FEMALE, JACK pin (shroud) Mil-Std-348A Fig.
More information8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
More informationRotary Switches Product Selection Guide
Switches Product Selection Guide Series A RTA M R F H RW RM ENC Switch Type Multi-pole/ Multi-position Multi-pole/ Multi-position Half-inch Rota-slide Rota-slide Power Rota-slide Subminiature SMT Subminiature
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More informationET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
More informationE Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
More information9 mm Multi-Ganged Potentiometer
9 mm Multi-Ganged Potentiometer QUICK REFERENCE DATA Multiple module Up to 7 modules Switch module n/a Detent module Yes Special electrical laws A: linear, L: logarithmic, F: reverse logarithmic and others
More informationData Sheet for Precision Potentiometer
The RP22/23 potentiometers in 22 mm metal housing are suitable for applications where a accurate and compact sensor with high electrically effective rotation angle is required. Accurate wirewound potentiometer
More informationToggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
More informationSFI Electronics Technology
1. Part Number Identification SFI 2220 SA 240 250 J Company Logo Inner Code Size 1206~3220 SA SHA Series 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V 151 = 15 10 1 V=150V
More informationType N connectors DIVIDER PAGE
Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110
More informationSeries WP. Pushbutton Switches HOW TO ORDER. Toggle Rocker Slide Pushbutton AV Rotary Tact Touch Key Miscellaneous
RATING: AC125V 7A, AC250V 4A. CIRCUIT: DPDT. CONTACT RESISTANCE: 20m-ohms max. @ 5VDC 1A. DIELECTRIC STRENGTH: AC 1,500V for 1 min. LIFE EXPECTANCY: 6-10 cycle / min. ELECTRICAL LIFE: 6,000 cycle. OPERATING
More informationELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67
PUSHBUTTON SWITCHES ELECTRO-MECHANICAL MINIATURE SEALED SERIES 48EM: ACTUAL SIZE FLEX-TECH MINIATURE SEALED PUSHBUTTON SWITCHES This rugged multi-option sealed pushbutton series offers the utmost in choices
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationonlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
More informationSwitch EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS 3PST EDG/EDS 4PST EDG/EDS DPDT
EDG/EDS SERIES SLIDE TYPE EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS PST EDG/EDS 4PST EDG/EDS DPDT FETURES Tactile response is performed directly by larger contact pressure to ensure very stable contact.
More informationA Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
More informationRotary Position Sensors
RE.pdf Rotary Position Sensors SMD/Lead Dust-proof Type 12mm Size SV01 Series Features 1. Dust-proof construction protects the interior from dust, which maintains stable characteristics. 2. Compliant to
More informationSP1. Compact String Pot Voltage Divider Output SP1-25 SP1-50 SP SP1-50-3
SP Compact String Pot Voltage Divider Output Linear Position to 50 inches (70 mm) Rugged Polycarbonate Enclosure IP67 Optional Mounting Bracket & Optional Sensor Cover w/connector IN STOCK for Quick Delivery!.9
More informationMechanical Key Switch
Mechanical Key Switch B3F A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical and High-force. Excellent tactile feel combined with high life expectancy. Available in stick packaging for automatic mounting
More informationZV/ZVY Series Low Voltage SMD Varistors
Description: The ZV Series of low voltage varistors is designed to protect sensitive electronics devices against high voltage surges in the low voltage region. They offer excellent transient energy absorption
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationn For use in telecommunication circuit applications requiring low current protection with high surge tolerance
*RoHS COMPLIANT & **HALOGEN FREE 0.5 SinglFuse SF-3812TM-T Series Features n Replacement for Bourns Telefuse models B0500T, B1250T and B2000T n For use in telecommunication circuit applications requiring
More informationC&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
More information