48 Series - Contactor Relay 4PST - N.O. - Double Make, 15 Amp

Size: px

Start display at page:

Download "48 Series - Contactor Relay 4PST - N.O. - Double Make, 15 Amp"

Patience Shana Powell
6 years ago
Views:

48 Series - Contactor Relay 4PST - N.O. - Double Make, 15 Amp E13224 The 48 series is a contactor with a 4 normally open, double make contacts rated up to 3HP.

1 48 Series - Contactor Relay 4PST - N.O. - Double Make, 15 Amp E13224 The 48 series is a contactor with a 4 normally open, double make contacts rated up to 3HP. It uses a solenoid type moving core design which generates high contact forces. The coil is encapsulated for complete protection. Screw terminals are standard. Available as an option is a SPDT, 15 Amp, snap switch, auxiliary contact. GENERAL SPECIFICATIONS (@ 25 C) Contacts: Contact Configuration Contact Material Contact Rating 120 / 240VAC Resistive 28VDC Resistive Motor 120VAC 1 Phase Motor 240VAC 3 Phase Contact Resistance, Initial 4PST-NO - Double Make Silver Alloy 15 Amp 15 Amp 1Hp 3Hp 50 milliohms 6VDC Coil: Coils Available Nominal Coil Power Input Voltage Tolerance - AC Input Voltage Tolerance - DC Drop-out voltge Duty Timing: Operate Time (max) Release Time (max) Dielectric Strength: Across Open Contacts Between mutally insulated point Insulation resistance Temperature: Operating Storage Life Expectancy: Electrical (full load) Mechanical (no load) Miscellaneous: Mounting Position Enclosure Weight AC and DC AC: 22VA, DC: 10W 85% to 110% of nominal 80% to 110% of nominal 10% of nominal Continuous 60 ms 30 ms 2500Vrms 2500Vrms 1,000 Mohms 500VDC -40 to 50 C (-40 to 122 F) -40 to 105 C (-40 to 221 F) 100,000 5,000,000 Vertical - Contacts Up Open 26.4 oz (748 grams) 48 Wire Diagram (Top View) 3/5 (843)

2 Motor Relays Amp Contact Ratings Volts Phase Resistance Motor Amps HP 120VAC /240VAC * 208/240VAC * 480/600VAC /125VDC VDC Auxiliary Contact 120VAC VAC (39.6) 3.6 (91.4) 3.12 (79.3) Dimensions Shown in inches & (millimeters) 5.09 (129.2) 3.37 (85.7).20 (5.0).31 (7.9) Section 3 *HP ratings are at 240V only for U.L HP ratings is at 440/550V for U.L 4.57 (116.0) AC, 50/60HZ Coil Data DC Voltage mamp DC ohms ma ohms * Note: Contactors must be mounted in vertical position with the contacts up. *120VAC or VDC 240VAC or 230VDC Ordering Code 48 LXX VAC Series 48 Contact Arrangement LXX- 4 poles - N.O., double make Options 1 Form C Auxiliary contact - CODE 90 (snap switch) Coil Voltage AC: 12, 24, 120, 240, 440, 550 (Add VAC) DC: 12, 24, 125, 230 (Add VDC) (843) /6

name a few. The 275 series has Quick connect coil terminals extending out the back (opposite the contact terminals), mechanically interlocked armatures is a standard feature.

3 275 Series - Motor Reversing Contactor 2X - 3PST, 15 Amp File No. E13224 The 275 series is a 2 coil, compact motor reversing contactor which finds extensive applications in the industrial door operator industry, the hoist industry and electronic wheel balancers, to name a few. The 275 series has Quick connect coil terminals extending out the back (opposite the contact terminals), mechanically interlocked armatures is a standard feature. GENERAL SPECIFICATIONS (@ 25 C) Contacts: Contact Configuration Contact Material Contact Rating 120 / 240VAC Resistive Motor 120VAC 1 Phase Motor 240VAC 1 Phase Motor 240VAC 2-3 Phase Motor 480 / 600VAC 2-3 Phase Contact Resistance, Initial 3PST-NO Double Make per side Silver alloy 15 Amp / 10 Amp 1Hp 1.5Hp 3Hp 3Hp 100milliohms 6VDC Coil: Coils Available Nominal Coil Power Input Voltage Tolerance - AC Input Voltage Tolerance - DC Drop-out voltge Duty Timing: Operate Time (max) Release Time (max) Dielectric Strength: Across Open Contacts Between Mutally Insulated Points Insulation Resistance Temperature: Operating Storage Life Expectancy: Electrical (full load operations) Mechanical (no load operations) Miscellaneous: Mounting Position Enclosure Weight AC and DC 17VA 4.9W 85% to 110% of nominal 80% to 110% of nominal 10% of nominal Continuous 50mS 30mS 2500 VRMS 2500 VRMS VRMS -34 to 74 C (-30 to 165 F) -40 to 105 C (-40 to 221 F) 100,000 5,000,000 Vertical, Contacts Up Semi-Enclosed 16.0oz (406 grams) 275 Wire Diagram /7 (843)

4 Motor Relays Amp Dimensions Shown in inches & (millimeters) 2.88 (73.1) 2.56 (65.0) 2.27 (57.7) Section 3 UP 1.59 (40.4) 3.40 (86.4) Recommended Mounting Position Ordering Code 275 KXX 90-24VAC Series 275 Contact Arrangement KXX (2X 3PST N.O. double make) Optional Features 2 Auxiliary contacts each SPDT (1 per coil).25 quick connect terminals - CODE 90 4 Auxiliary contacts each SPDT (2 per coil).25 quick connect terminals - CODE 91 Rectified coil - CODE V2 Coil Voltage AC: 12, 24, 120, 240 (Add VAC) DC: 12, 24, 125 (Add VDC) (843) Coil Specifications AC Coil, 50/60HZ DC Coil Nominal Resistance Nominal Resistance voltage ohms ±10% voltage ohms ±10% /8

5 548 Series - Contactor 3PST - NO Double Make, 30 Amp The 548 series is a contactor with 3 pole normally open - double make contacts rated up to 7.5HP. It uses a solenoid type moving core design which generates high contact forces. The coil is encapsulated for complete protection. Screw terminals are standard. Available as an option is a SPDT, 15 Amp, snap switch, auxiliary contact. GENERAL SPECIFICATIONS (@ 25 C) Contacts: Contact Configuration Contact Material Contact Rating 120 / 240VAC Resistive 28VDC Resistive Motor 120VAC 1 Phase Motor 240VAC 1 Phase Motor 480/600VAC 3 Phase Contact Resistance, Initial 3PST - N.O. - Double Make Silver Alloy 30 Amp 30 Amp 1.5Hp 5Hp 7.5HP 100 milliohms 6VDC Coil: Coils Available Nominal Coil Power Input Voltage Tolerance - AC Input Voltage Tolerance - DC Drop-out voltge Duty Timing: Operate Time (max) Release Time (max) Dielectric Strength: Across Open Contacts Between Mutally Insulated Points Insulation Resistance Temperature: Operating Storage Life Expectancy: Electrical (full load operations) Mechanical (no load operations) Miscellaneous: Mounting Position Enclosure Weight AC and DC 22VA 10W 85% to 110% of nominal 80% to 110% of nominal 10% of nominal Continuous 60ms 30ms 2500 VRMS 2500 VRMS VAC -40 to 50 C (-40 to 122 F) -40 to 50 C (-40 to 122 F) 100,000 5,000,000 Vertical - Contacts up Plastic Contact Cover 26.4oz (748 grams) 548 Wire Diagram 3/9 (843)

6 Motor Relays Amp Dimensions shown in inches & (millimeters) Mount in Position Shown 3.26 (82.8) Section (82.8) 3.26 (82.8) 3.26 (82.8) Ordering Code 548 KXX VAC Series 548 Contact Arrangement KXX-3PST - N.O. - Double make Options 1 Form C Auxiliary contact - CODE 90 (snap switch) Coil Voltage AC: 12, 24, 120, 240 (Add VAC) DC: 12, 24, , 230 (Add VDC) Coil Data AC, 50/60HZ DC (10W) Voltage mamp ohms mamp ohms (843) /10

7 575 Series - Motor Reversing Contactor 2X 3PST, 30 Amp E13224 The 575 series relay is rated to 7.5HP. Two sets of 3 pole, double-make, N.O. contacts are mechanically interlocked to prevent simultaneous closure. Front mounted auxiliary contacts are available for electrical lockup. The 575 motor revering contactor is widely used for control of overhead doors, elevators, hoists, machine tools, and others similar devices that requires frequent jogging. GENERAL SPECIFICATIONS (@ 25 C) Contacts: Contact Configuration Contact Material Contact Rating 120 / 240VAC Resistive Motor 120VAC 1 Phase Motor 240VAC 1 Phase Motor 240VAC 2-3 Phase Motor 480 / 600VAC 2-3 Phase Contact Resistance, Initial 3PST-NO Double Make per side Silver alloy 30 Amp 1.5Hp 3Hp 5Hp 7.5Hp 100milliohms 6VDC Coil: Coils Available Nominal Coil Power Input Voltage Tolerance - AC Input Voltage Tolerance - DC Drop-out voltge Duty Timing: Operate Time (max) Release Time (max) Dielectric Strength: Across Open Contacts Between Mutally Insulated Points Insulation Resistance Temperature: Operating Storage Life Expectancy: Electrical (full load operations) Mechanical (no load operations) Miscellaneous: Mounting Position Enclosure Weight AC and DC 22VA 10W 85% to 110% of nominal 80% to 110% of nominal 10% of nominal Continuous 60mS 30mS 2500 VRMS 2500 VRMS VRMS -34 to 74 C (-30 to 165 F) -40 to 105 C (-40 to 221 F) 100,000 1,000,000 Vertical, Contacts Up Semi-Enclosed 42.0oz (1.1 Kg) 575 Wire Diagram /11 (843)

8 Motor Relays Amp Dimensions Shown in inches & (millimeters) Section 3 UP 3.46 (87.8) Recommended Mounting Position 1.64 (42.9).88 (22.4) 2.43 (61.7) 4.75 (120.4) 5.22 (132.6) Ordering Code 575 KXX 90-24VAC Series 575 Contact Arrangement KXX (2X 3PST N.O. double make) Optional Features 1 Auxiliary contacts each SPDT - CODE 90 Coil Voltage AC: 12, 24, 120, 240, 550 (Add VAC) DC: 12, 24, , 240 (Add VDC) Coil Specifications AC Coil, 50/60HZ DC Coil Nominal Resistance Nominal Nominal Resistance Nominal voltage ohms current voltage ohms current ±10% (Amp) ±10 (Amp) * ** Note: *AC coil is 120, 50/60HZ **DC coils 115VDC (843) /12

645T Series - Solid State On / Off 10-40 Amp E52197 The 645T series of solid state relays uses triacs for on/off control of three phase loads. Operation is three pole normally open.

9 645T Series - Solid State On / Off Amp E52197 The 645T series of solid state relays uses triacs for on/off control of three phase loads. Operation is three pole normally open. Inputs can be AC or DC operated. Load currents can range from 10 to 50 amps and up to a nominal voltage of 480VAC. Both random turn on or zero cross is available. GENERAL SPECIFICATIONS (@ 25 C) Input Characteristics DC Input AC Input Input Voltage Must Release Voltage Maximum Input Current Reverse Polarity Protection 3-32VDC 1VDC 80mA Yes VAC 10VAC 30 ma N/A Output Characteristics 10 Amp 25 Amp 40 Amp Min. Load current to maintain on Non-Repetitive Surge Current (1 cycle) Maximum I2T for Fusing (Asquared sec) Suggested Heatsink C/W Load Voltage Range Frequency Range Peak Blocking Voltage Maximum Rate of Rise Off State Voltage (dv/dt) Max. Off state leakage current (rms) Max. On State Voltage Drop Maximum Turn-On 60 Hz Maximum Turn-Off 60 Hz Miscellaneous Characteristics 100mA 100A 50A2 S 1.0 C/W 250V/uS 120mA 250A 312A2 S 0.14 C/W 250V/uS 250mA 300A 450A2 S 0.14 C/W+FAN 250V/uS Dielectric Strength - I or O to case Operating Temperature Range Storage Temperature Range Weight Input Terminal Size Output Terminal Size 4000Vrms -30 to 80 C -40 to 100 C 320g M3.5 M4 3/13 (843)

10 Load current (Amps) Motor Relays Amp L1 L2 L3 Solid State On/Off Wire Diagram Dimensions Shown in inches & (millimeters).75 (19.1) 4.14 (105.1) 3.72 (94.6).21 (5.3) 1.29 (32.8).93 (23.5) Section 3 440VAC F1 F2 F3 R S T 2.93 (74.6) 2.18 (55.4) 1.88 (47.7).83 (21.6) U V W + - Ø.50 (12.7) Ø.21 (5.3).02 (.5) 1.17 (29.7) Motor 3 Derating Curve Ordering Code 645 T Z or R VDC Series 645 Switching Triac - CODE T Turn on Zero cross - CODE Z Random turn on CODE R Maximum ambient temperature ( C) Load Voltage 480VAC - CODE 4 Maximum Load Current 10, 25, 40 (Amp) Input Voltage 3-32VDC VAC (843) /14

11 645S Series - Solid State On / Off Amp E52197 The 645S series of solid state relays uses back to back SCRs for on/control of three phase loads. Operation is three pole normally open. Inputs can be AC or DC operated. Load currents can range from 10 to 75 amps and up to a nominal voltage of 480VAC. Both random turn on or zero cross construction is available. GENERAL SPECIFICATIONS (@ 25 C) Input Characteristics DC Input AC Input Input Voltage Must Release Voltage Maximum Input Current Reverse Polarity Protection 3-32VDC 1VDC 80mA Yes VAC 10VAC 30 ma N/A Output Characteristics 10 Amp 25 Amp 40 Amp 50 Amp 75 Amp Rated Load Current (rms) Min. Load current to maintain on Non-Repetitive Surge Current (1 cycle) Maximum I2T for Fusing (Asquared sec) Suggested Heatsink C/W Load Voltage Range Frequency Range Peak Blocking Voltage Maximum Rate of Rise Off State Voltage (dv/dt) Max. Off state leakage current (rms) Max. On State Voltage Drop Maximum Turn-On 60 Hz Maximum Turn-Off 60 Hz 10A 100mA 80A 41A2 S 1.0 C/W 250V/uS 25A 120mA 80A 510A2 S 0.14 C/W 300V/uS 40A 250mA 800A 3745A2 S 0.14 C/W+FAN 475V/uS 50A 250mA 520A 1035A2 S 0.14 C/W+FAN(2) 500V/uS 1.8VAC 75A 250mA 1150A 2600A2 S 0.14 C/W+FAN(2) 500V/uS 1.8VAC Miscellaneous Characteristics Dielectric Strength - I or O to case Operating Temperature Range Storage Temperature Range Weight Input Terminal Size Output Terminal Size 4000Vrms -30 to 80 C -40 to 100 C 320g M3.5 M4 3/15 (843)

12 Load current (Amps) Motor Relays Amp Dimensions Shown in inches & (millimeters) L1 L2 L3 Solid State On/Off Wire Diagram.75 (19.1) 4.14 (105.1) 3.72 (94.6).21 (5.3) 1.29 (32.8).93 (23.5) Section 3 440VAC F1 F2 F3 R S T 2.93 (74.6) 2.18 (55.4) 1.88 (47.7).83 (21.6) U V W + - Ø.50 (12.7) Ø.21 (5.3).02 (.5) 1.17 (29.7) Motor 3 Derating Curve Ordering Code 645 S Z or R VDC Series 645 Switching SCR - CODE S Turn on Zero cross - CODE Z Random turn on CODE R Load Voltage 480VAC - CODE 4 Maximum Load Current 10, 25, 40, 50, 75 (Amp) Input Voltage 3-32VDC VAC Maximum ambient temperature ( C) (843) /16

13 645RT Series - Solid State Reversing Amp E52197 The 645RT series of solid state relays uses triacs for reversing phases on three phase loads. The most typical use is motor reversing. Inputs are DC operated. Load currents can range from 10 to 40 amps and up to a nominal voltage of 480VAC. Both random turn on or zero cross is available. GENERAL SPECIFICATIONS (@ 25 C) Input Characteristics Input Voltage Must Release Voltage Maximum Input Current Reverse Polarity Protection DC Input 4-32VDC 1VDC / 8VDC 80mA Yes Output Characteristics 10 Amp 25 Amp 40 Amp Min. Load current to maintain on Non-Repetitive Surge Current (1 cycle) Maximum I2T for Fusing (Asquared sec) Suggested Heatsink C/W Load Voltage Range Frequency Range Peak Blocking Voltage Maximum Rate of Rise Off State Voltage (dv/dt) Max. Off state leakage current (rms) Max. On State Voltage Drop Maximum Turn-On 60 Hz Maximum Turn-Off 60 Hz Miscellaneous Characteristics 100mA 100A 50A2 S 0.5 C/W 250V/uS 120mA 250A 312A2 S 0.14 C/W 250V/uS 250mA 300A 450A2 S 0.14 C/W+FAN 250V/uS Dielectric Strength - I or O to case Operating Temperature Range Storage Temperature Range Weight Input Terminal Size Output Terminal Size 4000Vrms -30 to 80 C -40 to 100 C 320g M3.5 M4 3/17 (843)

14 Load current (Amps) Motor Relays Amp Dimensions Shown in inches & (millimeters) Foward / Reverse Motor Control Wire Diagram L1 L2 L3 440VAC F1 R1 F2 R Motor (74.6) 2.30 (58.4) 1.88 (47.7) 4.14 (105.1).78 (19.9).21 (5.3) 1.10 (27.9).94 (23.7) Section (94.0).02 (.5) 1.12 (28.3) F R Derating Curve Ordering Code 645 T Z or R VDC Series 645 Switching Triac - CODE T Turn on Zero cross - CODE Z Random turn on - R Load Voltage 480VAC - CODE Maximum ambient temperature ( C) Maximum Load Current 10, 25, 40 (Amp) Input Voltage 4-32VDC (843) /18

PM Series - Open Style Power Relay 4PDT, 35 Amp E13224 The PM Series relays offer 4 double throw poles (4PDT) for up to 35 amp at 277 VAC or 20 amp at 28Vdc.

15 PM Series - Open Style Power Relay 4PDT, 35 Amp E13224 The PM Series relays offer 4 double throw poles (4PDT) for up to 35 amp at 277 VAC or 20 amp at 28Vdc. Product also is capable of 10 amps tungsten switching. Screw terminals (8-32) are standard but.250 quick connects are also available. E367G GENERAL SPECIFICATIONS (@ 25 C) Contacts: Contact Configuration Contact Material Contact Rating 120 / 240VAC Resistive 28VDC Resistive Motor 240VAC 1 Phase Contact Resistance, Initial 4PDT Silver Alloy 35 Amp 20 Amp 1.5Hp 100 milliohms 6VDC Coil: Coils Available Nominal Coil Power Input Voltage Tolerance - AC Input Voltage Tolerance - DC Drop-out voltge Duty Timing: Operate Time (max) Release Time (max) Dielectric Strength: Across Open Contacts Between Mutally Insulated Points Insulation Resistance Temperature: Operating Storage Life Expectancy: Electrical (full load operations) Mechanical (no load operations) Miscellaneous: Mounting Position Enclosure Weight AC and DC 14VA 4.4W 85% to 110% of nominal 80% to 110% of nominal 10% of nominal Continuous 40ms 30ms 1500 VRMS 2200 VRMS VAC -34 to 74 C (-30 to 165 F) -40 to 105 C (-40 to 221 F) 100,000 2,000,000 Any Optional - 35D oz (379 grams) Ordering Code PM VDC Series PM Type Screw terminals NO CODE.25 Quick connect terminals CODE T Contact Arrangement 4 form C (4PDT) - CODE 17 Coil Voltage AC: 12, 24, 120, 240, 240 (Add VAC) DC: 12, 24, , 240 (Add VDC) 3/19 (843)

Motor Relays 15-75 Amp PM Wire Diagram Dimensions Shown in inches & (millimeters) Section

4) Dust Cover Optional Part Number - 35D203 1.00 (25.4) 2.00 (50.8).206 (3X) (5.

16 Motor Relays Amp PM Wire Diagram Dimensions Shown in inches & (millimeters) Section Max. (69.1) 2.66 Max. (67.6) 3.40 Max. (86.2) 2.77 (70.4) Dust Cover Optional Part Number - 35D (25.4) 2.00 (50.8).206 (3X) (5.23) Dimensions Shown in inches & (millimeters) PM Dust Cover 2.09 (53.1) 2.60 (66.0) (843) /20

5 Series - Mechanical Latch 2PDT - 4PST, 30 Amps

5 Series - Mechanical Latch 2PDT - 4PST, 30 Amps The 5 series is a 2 coil mechanical latch electrical reset power relay. It is panel mounted with screw terminals, and has 600 volt spacing. The 5 series