OWNERS MANUAL R50-11 GOLF GREENS ROLLER

Transcription

1 OWNERS MANUAL R0- GOLF GREENS ROLLER Results through design; not weight. R0- Owners Manual

2 Table of Contents Machine Information Record... Specifications... Important... Safety Information... - Warranty... - Assembly... - Pre-Operation Checklist... Standard Operation Procedures... - Points To Remember... Maintenance Schedule... Maintenance... - Safety & Instructional Decals... - Operating Procedures... Upper body... - Under body... - Trailer Assembly... - Pin Drawbar Assembly... Seat... - Options H-Frame... - Options Slitter... Brush Spiker... - LED Lights... Tow ball Drawbar & Coupling Assembly... Jockey Post... Harness Loom... Schematic Wiring Diagram... Separate Engine Owners Manual can be downloaded from R0- Owners Manual

3 Machine Information Record Congratulations on your investment in the R0- Golf Green Roller and your move to smoother, faster, more consistent putting Greens. The following operation and maintenance manual has been prepared for use with the R0- Golf Green Roller. It is intended as a guide and supplemental updates to the manual may take place at a future date, without prior notice. For the latest information visit This machine is engineered to be simple to operate and easy to maintain. If you have any questions or concerns that this manual does not address, please feel free to contact your distributor or sales@truturf.com. Distributor Information Name: Address: Telephone: Fax: Machine Information Model. R0- Golf Green Roller Serial No. Engine No. Transmission No. Purchase Date No. R0- Owners Manual

4 Specifications Engine Type Horsepower Lighting Coil Engine Cover Transmission Manufacturer Model Oil Capacity Engine Transmission Cooling Engine Transmission Drive Train Drive Roller Direction Control Speed Control Operating Speed Steering Honda :.hp (. kw) Built into engine Fully enclosed Eaton Hydrostatic Series,.0qts (L) + Filter qts (.L) + Filter Air cooled blade cooling fan / duplex chain, self-adjusting Rubber coated, non-stick. Flexible, contour following Ergonomically positioned foot pedals Progressive foot pedal movement, down/ up Dampeners for smooth stopping 0- mph (0-kph) Joystick - Light load, directly connected to smoothing head Engine Vibration Seat Trailer Ground Pressure (Footprint) Smoothing Heads Rolling Width (Swath) Weight Drawbar Lifting weight when connecting Pin style, standard Tires Engine Start/Stop Brake Roller Park OPS Seat Safety Switch Isolated through rubber mounts Premium UV protected, with adjustable armrests Integrated, extra heavy duty, folds from rolling position to transport position. psi ( kpa) overlapping, fitted with tri-rollers in each head, no gap between heads 0 (0mm) lb (0kg) lb (kg) Quick release, pin built in x.0 x. ply Recoil & Switch Hydrostatic Handbrake, Drum style Operated through operator seat presence or absence Roller Cleaning Nodules Optional Equipment Lights Slicer - Quick release Spiker - Quick release Brush - Quick release Drawbar coupling (0mm) Drop down leg Warranty independent nodules, self adjusting to clean of debris AC/DC LED blades, self-rotating on shaft & bearings Slice depth up to 0mm, ( / ) 0 wheels, self-rotating on SS shaft & bearings. Spike depth mm, ( ) Stiff or Medium strength bristles available Ball style Suits Ball style drawbar only years - Limited manufacturer s warranty. R0- Owners Manual

5 Important Please read and understand before operating machine.. Pre-check all nuts, bolts, grub screws for tightness prior to operating machine.. Understand the operating procedures and the controls before operating.. Use the machine to roll - greens then check that all nuts, bolts etc. are tight. If loose and the Loctite seal has been broken, treat item as per Loctite instructions, reseal, then tighten securely.. Loose transmission and drive roller sprockets will cause damage to shafts and keyways. Ensure they are correctly tightened at all times.. Change the transmission oil after 0 hours of operation, then as per the servicing schedule. We use and recommend Penrite Synthetic SAE W-0. Available through our dealer network or use an equivalent synthetic oil. U.S.A. customers contact your dealer or visit www. truturf.com to find your nearest dealer. Australian customers call 0. International customers contact your dealer or visit to find your nearest dealer. R0- Owners Manual

6 Safety Information Safety is of the utmost importance when operating turf equipment. To ensure safe operation of the R0- Golf Greens Roller, please follow the following safety guidelines. Always make a pre-operation inspection before you start the engine. If this procedure is not carried out damage to property or personnel may occur. Keep children, pets and inexperienced personnel away from the machine. This machine should only be operated by trained and skilled personnel - check with your supervisor if you are unsure. Know how to stop the engine when in motion. Read and understand engine manufacturers manual, as supplied. person to use this machine. Unskilled persons can harm themselves and others if they operate this machine. Do not start the engine in enclosed areas unless well ventilated. Carbon monoxide gases are dangerous if inhaled, it can cause death; use the machine outdoors. When transporting the roller or carrying out maintenance, make sure the trailer lock down mechanism is secured by the locking pin to prevent premature release of the catch. If the trailer catch is not correctly engaged while towing and releases accidentally, the front of the roller can drop and dig into the ground, causing the machine to move dangerously in any direction causing bodily injury. Never permit inexperienced operators to use the machine. This machine requires certain knowledge and expertise to operate it; you must be a trained R0- Owners Manual

7 Safety Information This machine is equipped with an operator presence switch for operator safety. This operates similar to ride on mowers where if the operator attempts to leave the seat while the engine is running and has not fully engaged the parking brake the engine will stop. When engine is running, always keep hands and loose clothing away from rotating shafts, chains and sprockets in the transmission area. Operator: remember it is your responsibility to be aware of your surroundings. To avoid accidents, think safe and operate safe. When stopping and before getting off the machine always apply the Park Brake. If hair, clothing or loose objects become entangled on a rotating shaft serious bodily injury could occur. Always stop engine before opening safety cover fitted to the transmission area. Never ride on the machine when machine is being towed. R0- Owners Manual

8 Warranty Universal conditions Tru-Turf Pty. Ltd. (Tru-Turf) will repair or replace any item or part of a Tru-Turf Golf Greens Roller that is defective in workmanship or material for a period of twenty four () months or unless otherwise stated, from the date of delivery of the new product to the original end user. Items identified as warrantable will be repaired or replaced by an approved Tru-Turf Dealer, unless otherwise Authorised by Tru-Turf. Protected by warranty Please ensure your dealer has completed and submitted the online warranty registration and inspection report forms applicable to your unit. This will ensure that it has been sent directly to Tru-Turf for registration and approval. This record must be referred to along with the reasons why the purchaser believes that the product or a part is defective in the categories of faulty material or workmanship. Warranted OEM parts Specific component parts supplied to Tru-Turf Pty. Ltd. or by OEM suppliers are covered by that supplier s Warranty. These parts and components include Eaton Transmissions, Honda Engines, Foot Pedal and trailer arm struts. Only Tru-Turf manufactured parts qualify for the twenty four () month warranty. Normal wear and tear Tru-Turf will not repair or replace parts that are subject to normal wear and tear and or that are subject to regular maintenance intervals as specified in the product Operator s Manual that have not been adhered to. These parts include, but are not limited to, oils, filters, tyres, shafts, bearings, blades, spikers, slicers, brakes, belts, hoses, spark plugs, drive chains, sprockets, drive rollers & smoothing rollers. Items not covered by this warranty Tru-Turf will not repair or replace any item that has been damaged by accident, lack of reasonable care and protection or lack of suitable storage. R0- Owners Manual

9 Warranty Tru-Turf will not warrant parts that have been altered or modified, nor after-market parts fitted without written Tru-Turf approval. Tru-Turf will not warrant after-market parts that are installed in place of failed genuine parts. Tru-Turf will not warrant parts that have not been installed by an approved Tru-Turf dealer, nor will Tru-Turf warrant parts that have not been maintained per the Operator s Manual. The product is to be made available for Warranty repairs at the approved Tru-Turf dealer s premises or by arrangement with the approved dealer. Service calls, labour rates and freight costs related to the return of the faulty product to Tru-Turf or its agents are not included. Tru-Turf shall not be liable for any consequential loss, damage or costs incurred by or incidental to the failure of any new part supplied with the original purchase or any new part supplied as a replacement for any failed part. Acceptance or rejection of the Warranty Claim is entirely at the discretion of Tru-Turf or their OEM Suppliers who warrant their own part/s. The Warranty Registration and Inspection Report Form along with the TRU-TURF Pty. Ltd. Warranty Terms & Conditions statement are available for viewing, download or printing as a ready reference in the dealer dashboard on our website. The Warranty Registration and Inspection Report Form must be signed by both the Dealer Rep and the Customer and returned or warranty claim/s will be denied. No person or organisation has the authority to modify the terms or conditions or limitations of this Warranty without the written consent of Tru-Turf. R0- Owners Manual

10 Assembly Initial Assembly When you receive the crate, the machine will be broken down into components ready for assembly. If you run into any problems during assembly, please feel free to call your local distributor or agent. List of Components QTY Description Operation, Maintenance and Parts Manual (Online) Machine Frame/Body Drivers Seat Armrests / x / UNC Bolts Tires mounted on Wheel Rim Steering Joystick Dampener Strut (attached to main body end) Left-side Trailer Arm Right-side Trailer Arm 0mm External Circlips Drawbar Coupling Assembly / x / UNF P Bolts / UNF Nyloc Nuts R0- Owners Manual

11 Assembly Procedure Step : Mounting the seat to the seat base. Fit the armrests to the seat pan using the supplied screws, make sure the screws are all tightened. Place the assembled seat on the seat cover receptacle, place the seat base plate under the cover and use the four / x / UNC bolts supplied to fasten the seat to the plastic engine cover. Step : Mount the steering joystick to the steering shaft. Select the steering joystick. Slide the joystick into the slot on the top of the steering shaft, already installed in the steering column directly in front of the foot pedal controls, insert the / bolt into the bottom bolt hole, select a comfortable operating position, joystick forward for extra operating room or back for less, once determined insert the other / bolt into the upper hole and tighten both bolts securely. Step : Attaching the left-hand trailer arm to machine body. Locate the trailer arm support axle 0mm in diameter (/ ) which extends out on the left side of the machine, remove the circlip from the support axle. Grease the machined portion. Slide the left hand side trailer arm, onto the axle, replace the circlip, ensuring the circlip is located in the groove correctly. Step : Attaching dampener strut and right hand trailer arm. Locate the trailer arm support axle 0mm in diameter (/ ) which extends out on the right side of the machine body, remove the circlip from the axle. Hold the right side trailer arm in the vertical position and slide it part way onto the axle after greasing the shaft. Locate dampener strut, remove packing from the unattached end. Apply thread lock Loctite to the M0 bolt attached to the dampener strut. Screw the M0 bolt into the strut support on the trailer arm. R0- Owners Manual

12 Assembly Procedure If necessary use a soft headed hammer to tap the trailer arm onto the axle until the circlip groove is revealed, fit the circlip, ensuring it is located in the groove correctly. Step : Attaching draw bar to trailer arms. Locate the draw bar assembly. Gather the ends of the right and left trailer arms. Place the draw bar assembly between the trailer arms and align the holes, ensure it is in the correct direction as per the manual drawing. Place one / x / bolt through each hole, fit / Nyloc nut to each bolt and tighten securely. Test to ensure the trailer catch is correctly locking the trailer arms in the down position and the catch locking pin fits correctly when transporting the roller, for safety. Step : Attaching wheels to trailer arms. Locate the two wheels for the left and right side trailer arms. Check tires for the correct air pressure, approximately-psi. Do not exceed this pressure. The tires act as the suspension, hence the low P.S.I. Remove wheel nuts from both hubs, slide wheels onto hub with air valves facing outwards. Replace wheel nuts and tighten securely. Ensure the taper on the nuts, mate into the wheel tapers correctly. Step : Correct dampener strut operation When the roller is in the trailing position:. Carefully hold the draw bar assembly.. Lower machine until the front rests on the ground.. Release the locking catch.. Gently with a firm grip begin to raise the draw bar.. When it has travelled sufficiently the dampener strut will take over and prevent the trailer arms rapidly rotating on it s axle, allowing the roller to lower to the surface gently. R0- Owners Manual 0

13 Assembly Procedure This prevents the operator from being injured. When the roller is resting on the ground push the trailer arms back gently, (do not use excessive force) until the trailer arms will travel no further. The dampener strut is designed to hold the trailer arms back behind the operator with the wheels off the ground. The trailer arms will remain in this position whilst rolling the greens. Step : Replace engine oil A tag is placed on the engine s On/Off switch indicating you must fill the machine with oil prior to operation. Low oil level will cause the engine to stop on steep hills, the engine cut off safety switch is designed this way to protect the engine from damage if low in oil. The oil in the engine upon delivery (if not predelivered) is to prevent the inside of the engine from corroding, replace it with the correct engine oil, as per the manufacturers specifications. Step : Transmission oil tank breather. Unscrew the plastic plug if fitted from the top of the tank and replace it with the anti-splash breather supplied. Seal damage and oil leakage will occur if the breather is not installed. If this is not done damage to the seals in the transmission will occur. Step 0: Lubricate smoothing head pivot bearings. There is a grease nipple or zirk located on both smoothing head centre ball joint swivels. Apply grease to lubricate fittings. When rolling of the green is completed, move the roller onto the fringe, stop the engine, lock the trailer into the towing position, connect it to the towing vehicle then move off to the next green to be rolled. R0- Owners Manual

14 Pre-Operation Check List Oil filter/housing for leaks and tightness. Check all oil line fittings for leaks and tightness. Check to ensure nothing is chaffing the oil lines. (e.g. Transmission cover). Check bolts fitted to the oil filter housing for tightness. Check engine as per Honda manual. Ensure steering joystick has no looseness. Check that foot pedal depresses under normal foot pressure in both directions and returns to the neutral position. (Similar resistance to a motor vehicle clutch). If this action is not smooth, check the yoke and transmission struts for correct operation. Ensure that the draw bar locking catch mechanism is securely locked to the main draw bar and the safety pin is fitted when trailing the roller. Check and tighten grub screws fitted to the end bearing lock rings on the rubber coated drive roller and the spiker shaft bearings (if fitted) & pivot bearings on each smoothing head. Grease lightly bearings fitted to drive roller, spiker shaft (if fitted) and Smoothing Head pivot bearings. Replace plastic caps if missing. Oil rod ends, sparingly. Check tire pressure for proper operating pressure (-psi). Do not over inflate. Check for oil and fuel leaks - rectify before using machine. Lubricate the drive chain with a suitable chain lubricant. R0- Owners Manual

15 Standard Operation Procedures. Inspect and check that the roller is serviceable prior to departing from workshop.. Use a suitable towing vehicle to move roller from green to green.. Maximum recommended towing speed would be equal to a motorized golf buggy. Approximately mph/kph. Towing at excess speed or across rough terrain may cause damage to the machine and trailer.. When approaching the green do not tow the roller onto the green to set up, put the roller on the fringe of the green. Put trailer in the up position, start up the roller and drive it onto the green.. Greens can be rolled in any direction; take care to ensure there are no crease lines produced on the surface. head rollers on the high side of the green when rolling. This increases the weight onto the rubber drive roller and creates better traction, it also reduces slipping or spinning of the drive roller on the green, depending also on the operators ability. Whilst becoming familiar with the roller, set the throttle at about / - / speed. Press the left or right foot pedal down gently but not suddenly. Be smooth with your action, hold in this position until nearing the edge of the green, then take your foot gently off the pedal, the roller will come to a stop. Rest your other foot on the opposite pedal and gently apply the pressure to the pedal. It then starts to move the roller in the opposite direction. Once again be gentle with the pedal, but not sudden. By using the left and right pedal in this manner, will ensure there is no damage to the green and less wear and tear on the equipment and operator.. It is recommended that you place the smoothing R0- Owners Manual

16 Standard Operation Procedures. The correct procedure for rolling the green is: (a) Select the correct direction to roll the green, remember this roller can roll the greens in all directions. (b) Start on one side of the green and work your way across the green in a zigzag fashion, slightly overlapping each lap you roll: this makes sure you don t miss any part of the green and all of the green is rolled. Avoid coming back across the green to roll missed areas if possible. You should be able to complete the rolling of greens in the same time or quicker than by mowing using a triplex mower.. When rolling of the green is completed, move the roller onto the fringe, stop the engine, lock the trailer into the towing position, connect it to the towing vehicle then move off to the next green to be rolled. Do not put the trailer down into the towing position on the green; damage may occur to the green from the roller tires and body. 0. Applying the park brake. The park brake lever works on an over centre principle. To engage the park brake, pull the lever fully up and back. The park brake will remain in this on position. To dis-engage the park brake, push the park brake lever fully forward and down. The park brake will remain in this off position. Always operate the machine with the lever in the off position. Do not operate the roller with the park brake engaged as this will damage the park brake components and rubber coating on the drive roller. R0- Owners Manual

17 Standard Operation Procedures. This machine is equipped with a seat safety switch. This operates similar to ride on mowers where if the operator attempts to leave the seat while the engine is running as has not fully engages the parking brake the engine will stop.. Starting the engine. The engine will not start unless the park brake lever is in the fully engaged or on position. Refer to the Honda user manual for correct engine starting and running procedures.. Ensure that the fuel cock is switched to the off position whilst transporting the roller between greens. Flooding the engine with fuel may occur. This causes difficult starting of the engine.. When using the pin hitch style draw bar the following points must be adhered to. a). Ensure that the hole size in the tow hitch fitted to the prime mover is at least / (0mm) larger in diameter than the pin size fitted on the roller draw bar hitch. b). When towing forwards or reversing, be sure that the roller is not put into a jack knifed position, if it is, then damage to the pin hitch will occur. c). Do not cross excessively steep hills or dips where the tow ball pin may come in contact with the tow hitch hole. Remember turn off the fuel cock whilst towing the roller. R0- Owners Manual

18 Points to Remember Make sure the roller is serviceable before rolling. Start rolling from the fringe of the green. Smooth operation on the foot pedals. Pick a point on the other side of the green to roll to. Do not look at the green close to the roller; it makes it difficult to steer the roller straight; look well ahead. Use / throttle until you are proficient at operating the roller. Once you choose your rolling line hold the joystick steady, correcting direction gently as required. Move the steering joystick a little at a time to change direction; excessive movement of the joystick makes it difficult to maintain a straight line. Roll in straight lines. Do not leave the engine running with the roller parked on the green; the engine vibration will cause roller depression marks on the green. Move off the green when rolling is complete before putting the trailer in the down position. When rolling steep greens and the engine stops, check engine oil level. The engine is fitted with a safety switch; when the engine oil level is low the engine will stop. When stopping and before getting off the machine always apply the Park Brake. R0- Owners Manual

19 Maintenance Schedule Description Pre-Delivery Pre-Operating Monthly Monthly Check engine oil Check transmission oil level Beware of contaminants entering the transmission Lubricate drive chain (see page ) Check tires max psi Check gas Check smoothing roller bearing Check drive roller bearings Check for loose nuts and bolts Renew engine oil As per manufacturers handbook Renew transmission oil (see page 0 for correct oil) Every 00hrs or monthly Renew transmission oil filter * Renew smoothing roller bearings * Renew drive roller bearings * Renew chain tensioner swear pads * as required Renew drive chain * Replace foot pedal struts * as required Replace trailer strut * as required R0- Owners Manual

20 Maintenance Stop engine before performing any maintenance. Service the Honda engine according to the manufacturers maintenance schedule. Sling here (around pivot axle) Sling here (around channel) Raising and lowering the transmission cover. The key switch must be turned off before preforming this procedure. Lift the front centre of the transmission cover up and carefully tip it backwards until it reaches the travel limit. To lower the transmission cover, release the stay and pull the cover towards the front, carefully lowering the transmission cover onto the rubber corner rests mounted on the body. Ensure the cover corners are located correctly on all rests. Testing the park brake. Stop the machine safely on level flat ground and engage the park brake. Switch off and dismount the machine. Try to push the machine manually. The park brake should prevent the machine from moving. If the machine moves the parking brake Sling here (around pivot axle) R0- Owners Manual

21 Maintenance needs adjusting. Adjust the park brake by rotating the knob on the end of the lever in a clockwise direction when looking directly at the end of the lever. This tightens the brake, screwing the knob anti-clockwise loosens the brake effect. Adjusting the Pedals If the direction foot pedals become unbalanced for any reason it can be adjusted as follows. Open the transmission cover. It will be necessary to have the engine running and the roller in the transport position, suspended horizontal while performing this process. Take care to keep all limbs and clothing well away from the rotating shaft and coupling. Using the correct spanner release the lock nut on the gas strut. Rotate each strut to return the pedals to a central position while at the same time ensuring that the transmission is not engaging when in the central neutral position. Reset the locknut after performing this procedure to both struts. Changing engine oil Change oil and service as per the manufacturers servicing schedule enclosed as a separate insert to this manual. Changing transmission oil Ongoing Maintenance, Lubricant and Replacement Schedule (See chart). Note. Areas indicated with a * need to be changed when defective or as required. This may be before the recommended replacement schedule. Please replace all parts as necessary. You must employ safe work practises at all times when performing any assembly or service tasks on the machine. Should there be any need to lift the machine only use the points as detailed in diagram. R0- Owners Manual

22 Maintenance Transmission (pump, Eaton ) Initially, change the oil at 0 hours running time, then; change oil every 00 hours or annually, whichever occurs first. Change hydraulic oil filter every 00 hours or annually, whichever occurs first. Only use the manufacturer s recommended replacement oil filter. When fitting the filter, follow the instructions supplied with the filter. This will ensure that the filter remains tight and that no leaks occur. Check all hard line oil pipes for rubbing, excessive vibration, leaks and tightness on a regular basis. Check transmission oil level on oil tank sight glass. Oil level should remain at a minimum of mm ( ) and at a maximum of 0mm (. ) from the top of the tank. Oil Capacity including filter is litres or. U.S. quarts. For the ultimate performance we use and recommend the Penrite synthetic SAE W-0 transmission oil (Part No. R) or synthetic oil equivalent. Storing It is important to store this roller in the towing position. This ensures the trailer strut is in the closed position, protecting the shaft from corrosion, then failure and also the weight is taken off the roller bearings. Service of the drive chain system Replacement - Some chains look a like, but they are not, use only the chain and sprockets recommended as per the correct spare parts number. Wrong pitch drive chain fitted will cause excessive sprocket wear and possible drive failure. Tensioning the drive chain - No adjustment is required; the chain tension is automatically adjusted. R0- Owners Manual 0

23 Maintenance Lubrication Lubricate drive chain with a chain lube such as Molykote, Innox or ChunkaRocol ITW. Spray on the inside of the chain so that the lubricant is forced into each roller and around each pin prior to rolling of the Greens. Do not over lubricate. Service of smoothing roller bearings Whilst the Roller is suspended by the Trailer, check operational smoothness of the bearings fitted to each smoothing roller by rotating the rollers by hand. If bearing tightness, roughness or excessive looseness is detected, replace the faulty bearings. If bearings are faulty (a) Remove the complete smoothing head unit assembly from the machine, undo the four swivel mount bolts on the upper body and disconnect the steering rod, wheel the roller away until the total head assembly is exposed to work on. (b) Remove roller shaft bolts from end plates, remove rollers from the heads. (c) Fit new bearings, replace rollers into the heads, lubricate shaft bolts with an anti seize compound before installing them. Tighten securely and ensure rollers rotate freely when fully tightened. (d) If the connecting rods are removed or lengths altered ensure they are correctly adjusted so that the three heads are parallel to each other when in the straight ahead position. Adjust if necessary. R0- Owners Manual

24 Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. R0 - Tru-Turf Logo Decal R0 - Park Brake R0 - Left Accelerator Pedal RS0 - Machine ID Plate. (Note: This is not a spare part and will come attached from manufacturer). R0 - Right Accelerator Pedal R0- Owners Manual

25 Safety and Instructional Decals RS0 - R0- Model Decal R- Strut Warning R0 - Chain Warning R0- Caution Pinch Point RS0 - L.E.D. Lights R0- Owners Manual

26 Safety and Instructional Decals R0 - Important Traction RS0 - Choke RS0 - Throttle R0 - Slicer width R0 - PGA Decal R0- Owners Manual

27 Decal Locations R0 R0 R0 R0 DETAIL A E0 OVERLAPPING SMOOTHING HEADS F R0 R0 B DETAIL - B DETAIL - C C D DETAIL - E R0 E TOP VIEW R0 DETAIL - F DETAIL - D R FRONT VIEW R0 H DETAIL - G DETAIL - H TYPICAL ON BOTH BODY ENDS K FRONT VIEW L J G M L/H SIDE VIEW DETAIL - J R0- Owners Manual RS0 R0 DETAIL - K DECALS PLACED CENTRALLY ON COVER REAR VIEW R/H SIDE VIEW RS0 RS DETAIL - L TYPICAL ON BOTH COVER SIDES R0 DETAIL - M

28 Operating Positions Towing position Rolling position R0- Owners Manual

29 Upper Body RS00 UPPER BODY SUB-ASSY R0- EXPLODED - PARTS LIST RS00 BODY, WELDED, ASSY RS0 PLATE, SERIAL NUMBER, R0- E REST, CORNER, RUBBER - ENGINE COVER RS0 PLATE, CHECKER, FOOT PAD RS ENGINE CONTROL BRACKET SUB-ASSY RS CATCH, WIDE, FOLDED, TRAILER DRAWBAR RS COVER, SAFETY, S/S, HANDBRAKE LEVER 0 R0 R0 R0 R R R0 R0 R0 RS GRIP, HAND - ID x 0 LG SPRING, EXTENSION, ZP - Ø/"xg.x" LG BALL STUD 0mm SMALL FLANGE ZP METER, HOUR, TACHO (INCLUDED IN ITEM ) REST, RUBBER, TRAILER - mm THK. PLATE, LABEL, PARK BRAKE PLATE, INSTRUCTION, MOVE RIGHT PLATE, INSTRUCTION, MOVE LEFT HANDBRAKE LEVER, NO SWITCH - TUTHILL -0-0 R0 NUT, HEX, NYLOC, ZP - /" UNF R0 R0 NUT, HEX, NYLOC, T-TYPE - /" UNF CIRCLIP, EXT, BLK, 0mm R0 BOLT, HEX, ZP, /"UNF x " LG 0 R R0 RIVET, ALUMINIUM, - BOLT, HEX, ZP, /" UNF x." LG. 0 R0 R RIVET, BLK, - CABLE TIE - 00 X. RS RS TUBING, HEAT SHRINK, WRAP-AROUND, ADHESIVE-LINED DRAIN HOSE - HONDA ENGINE GX00 R0 R0 DRAWBAR SAFETY PIN & CHAIN SCREW, TEK, ZP, 0-x 0 E0 RS0 P CLIP (0mm) MAIN HARNESS LOOM R0 R BOLT, HEX, ZP, /"UNF x " LG RIVET, ALUMINIUM, - 0 R0 BOLT, HEX, ZP, /" UNF x." LG. 0 R0 R RS RS RIVET, BLK, - CABLE TIE - 00 X. TUBING, HEAT SHRINK, WRAP-AROUND, ADHESIVE-LINED DRAIN HOSE - HONDA ENGINE GX00 R0 DRAWBAR SAFETY PIN & CHAIN R0 SCREW, TEK, ZP, 0-x 0 E0 RS0 P CLIP (0mm) MAIN HARNESS LOOM HAND BRAKE LEVER R0- Owners Manual

30 ITEM RS0 R0- ENGINE MOUNT ASSY REAR VIEW - PARTS LIST QTY PART No. R00 ENGINE, HONDA, GX00, : REDUCTION WILL VARY T0 SHIM, ADJUSTING, ENGINE MOUNT RS0 PLATE, ENGINE MOUNT, WELDED, ASSY T MOUNT, RUBBER, ISOLATION, ENGINE R0 WASHER, SPRING, ZP - /" R0 BOLT, HEX, ZP -/" UNF x." LG R0 BOLT, HEX, ZP - M x LG R0 NUT, HEX, ZP - M 0 R0 WASHER, FLAT, SAE, ZP - /" ID x /" OD E0 CLIP, P, (0mm) RS REMOTE CHOKE KIT - HONDA (RETRO FIT) ITEM QTY PART No. R00 ENGINE, HONDA, GX00, : REDUCTION WILL VARY T0 SHIM, ADJUSTING, ENGINE MOUNT RS0 PLATE, ENGINE MOUNT, WELDED, ASSY Engine Mount Assembly T R0 R0 R0 R0 MOUNT, RUBBER, ISOLATION, ENGINE WASHER, SPRING, ZP - /" BOLT, HEX, ZP -/" UNF x." LG BOLT, HEX, ZP - M x LG NUT, HEX, ZP - M 0 R0 WASHER, FLAT, SAE, ZP - /" ID x /" OD E0 CLIP, P, (0mm) RS REMOTE CHOKE KIT - HONDA (RETRO FIT) REMOTE CHOKE KIT - HONDA (RETRO FIT) ITEM IS FITTED ON ENGINE CARURETER (OUT OF SIGHT - NOT SHOWN ON VIEW) 0 0 P-CLIP TO SUPPORT THE ENGINE CONTROL P-CLIPS TO SUPPORT THE MAIN WIRING HARNESS MOUNTED ON EXISTING CABLES MOUNTED ON EXISTING ENGINE BOLTS ENGINE MOUNT BOLT 0 R0- Owners Manual

31 Drive Train Assembly TRANSMISSION COOLING FAN & ENGINE COUPLING ENGINE MOUNT OIL TANK HONDA ENGINE OIL PIPES & FITTINGS EATON HYDROSTATIC TRANSMISSION TRANSMISSION COOLING FAN & ENGINE COUPLING OIL TANK OIL FILTER DRAIN PLUG OIL PIPES & FITTINGS ENGINE MOUNT DRIVE CHAIN DIRECTION PEDAL DAMPER STRUTS & TENSIONERS HONDA ENGINE OIL PIPES & FITTINGS EATON HYDROSTATIC TRANSMISSION R0- Owners Manual

32 Engine Drain Hose Arrangement RS ENGINE DRAIN HOSE RS ENGINE DRAIN HOSE ARRANGEMENT DETAIL A A RS ENGINE DRAIN HOSE DETAIL A R0- Owners Manual 0

33 R R0 METER, HOUR, TACHO NUT, HEX, NYLOC, ZP - /" UNF R WASHER, BACK-UP, RND, 0 ALUM. - /" x /" x ga Engine Control Bracket 0 R R00 R RS0 R0 R RIVET, ALUMINIUM, MULTI-GRIP, /" x /" WASHER, FLAT, ZP - /" ID x /" OD x / THK BOLT, HEX, ZP - /" UNF x." LG LABEL, STICKER, LED LIGHTS WASHER, SPRING, ZP - /" BOLT, HEX, ZP - /" UNF x /" LG RS ENGINE CONTROL BRACKET SUB-ASSY EXPLODED - PARTS LIST RS0 BRACKET, MTG, BODY, ENGINE CONTROLS, ASSY RS CONTROL LEVER & CABLE, HONDA - THROTTLE RS CONTROL LEVER & CABLE, HONDA - CHOKE E0 SWITCH, LIGHT R METER, HOUR, TACHO R0 NUT, HEX, NYLOC, ZP - /" UNF R WASHER, BACK-UP, RND, 0 ALUM. - /" x /" x ga R RIVET, ALUMINIUM, MULTI-GRIP, /" x /" R00 WASHER, FLAT, ZP - /" ID x /" OD x / THK 0 R BOLT, HEX, ZP - /" UNF x." LG RS0 LABEL, STICKER, LED LIGHTS R0 WASHER, SPRING, ZP - /" R BOLT, HEX, ZP - /" UNF x /" LG CABLES NOT SHOWN ON CHOKE & THROTTLE LEVERS 0 A DETAIL A MOUNTING HARDWARE R0- Owners Manual

34 R FITTING, STRAIGHT, BSPP-ORR R FITTING, ELBOW, 0 DEG, BSPP-ORR Transmission Assembly 0 R0 R R R R R FITTING, STRAIGHT, UNO-ORB FITTING, STRAIGHT, BSPT-ORR FITTING, ELBOW, 0 DEG, BSPT-ORR FITTING, ELBOW, 0 DEG, ORB-ORR FITTING, ELBOW, 0 DEG, SWIVEL JIC - TUBE JIC STRIP, RUBBER, OIL TANK MOUNT R0 BOLT, HEX, ZP - /" UNF x " LG RS00 TRANSMISSION, TANK & OIL PIPES ASSEMBLY R0- - PARTS LIST R0 R00 WASHER, SPRING, ZP - /" WASHER, FLAT, SAE, ZP - /" ID x /" OD x /" THK R R EATON HYDROSTATIC TRANSMISSION WITH OUTPUT SHAFT STRAIGHT CUT KEYWAY(REFERENCE ONLY) TANK, TRANSMISSION OIL R R R R0 PLUG, TANK DRAIN - /" BSP BREATHER, OIL TANK CARTRIDGE, FILTER, TRANSMISSION OIL TANK HOUSING, FILTER, TRANSMISSION OIL TANK 0 R BOLT, HEX, ZP - /" UNC x /" LG R00 R WASHER, SPRING, ZP - /" GAUGE, SIGHT, COMPLETE 0 RS0 PIPE, OIL, TRANSMISSION - OIL TANK SUPPLY TO EATON PUMP RS0 PIPE, OIL, TRANSMISSION - EATON PUMP TO OIL FILTER RS0 PIPE, OIL, TRANSMISSION - OIL FILTER TO TRANSMISSION RS0 R PIPE, OIL, TRANSMISSION - TRANSMISSION RETURN TO OIL TANK FITTING, ELBOW, 0 DEG, JIC-UNO R R R0 R FITTING, STRAIGHT, BSPP-ORR FITTING, ELBOW, 0 DEG, BSPP-ORR FITTING, STRAIGHT, UNO-ORB FITTING, STRAIGHT, BSPT-ORR 0 0 R R FITTING, ELBOW, 0 DEG, BSPT-ORR FITTING, ELBOW, 0 DEG, ORB-ORR R R R0 R0 R00 FITTING, ELBOW, 0 DEG, SWIVEL JIC - TUBE JIC STRIP, RUBBER, OIL TANK MOUNT BOLT, HEX, ZP - /" UNF x " LG WASHER, SPRING, ZP - /" WASHER, FLAT, SAE, ZP - /" ID x /" OD x /" THK R0- Owners Manual

35 Oil Tank & Fittings ITEM QTY R0- OIL TANK & FITTINGS - PARTS LIST R TANK, TRANSMISSION OIL R PLUG, TANK DRAIN - /" BSP R BREATHER, OIL TANK R CARTRIDGE, FILTER, TRANSMISSION OIL TANK R GAUGE, SIGHT, COMPLETE R STRIP, RUBBER, OIL TANK MOUNT 0 R FITTING, STRAIGHT, BSPP-ORR R FITTING, ELBOW, 0 DEG, BSPP-ORR R FITTING, STRAIGHT, BSPT-ORR 0 R FITTING, ELBOW, 0 DEG, BSPT-ORR R FITTING, ELBOW, 0 DEG, SWIVEL JIC - TUBE JIC R0 HOUSING, FILTER, TRANSMISSION OIL TANK R0 WASHER, FLAT, SAE, ZP - /" ID x /" OD R00 WASHER, SPRING, ZP - /" R0 WASHER, SPRING, ZP - /" R0 BOLT, HEX, ZP - /" UNF x " LG R00 WASHER, FLAT, SAE, ZP - /" ID x /" OD x /" THK R0 SET SCREW, HEX, ZP - /" UNC x /" LG. R0- OIL TANK & FITTINGS - PARTS LIST PART NUMBER R TANK, TRANSMISSION OIL R PLUG, TANK DRAIN - /" BSP R BREATHER, OIL TANK R CARTRIDGE, FILTER, TRANSMISSION OIL TANK R GAUGE, SIGHT, COMPLETE R STRIP, RUBBER, OIL TANK MOUNT R FITTING, STRAIGHT, BSPP-ORR R FITTING, ELBOW, 0 DEG, BSPP-ORR R FITTING, STRAIGHT, BSPT-ORR R FITTING, ELBOW, 0 DEG, BSPT-ORR R FITTING, ELBOW, 0 DEG, SWIVEL JIC - TUBE JIC R0 HOUSING, FILTER, TRANSMISSION OIL TANK R0 WASHER, FLAT, SAE, ZP - /" ID x /" OD R00 WASHER, SPRING, ZP - /" R0 WASHER, SPRING, ZP - /" R0 BOLT, HEX, ZP - /" UNF x " LG R00 WASHER, FLAT, SAE, ZP - /" ID x /" OD x /" THK R0 SET SCREW, HEX, ZP - /" UNC x /" LG. 0 0 R0- OIL TANK & FITTINGS - PARTS LIST R0- Owners Manual ITEM 0 QTY PART NUMBER R TANK, TRANSMISSION OIL R PLUG, TANK DRAIN - /" BSP R BREATHER, OIL TANK R CARTRIDGE, FILTER, TRANSMISSION OIL TANK R GAUGE, SIGHT, COMPLETE R STRIP, RUBBER, OIL TANK MOUNT R FITTING, STRAIGHT, BSPP-ORR R FITTING, ELBOW, 0 DEG, BSPP-ORR R FITTING, STRAIGHT, BSPT-ORR R FITTING, ELBOW, 0 DEG, BSPT-ORR R FITTING, ELBOW, 0 DEG, SWIVEL JIC - TUBE JIC R0 HOUSING, FILTER, TRANSMISSION OIL TANK R0 WASHER, FLAT, SAE, ZP - /" ID x /" OD R00 WASHER, SPRING, ZP - /" R0 WASHER, SPRING, ZP - /" R0 R00 BOLT, HEX, ZP - /" UNF x " LG WASHER, FLAT, SAE, ZP - /" ID x /" OD x /" THK

36 R0- Owners Manual Eaton Transmission

37 Eaton Transmission RS0 EATON TRANS COUPLING & FAN ASSY R0- - PARTS LIST ITEM QTY PART NUMBER R0 TRANSMISSION COUPLING RUBBER ASSY R0 EATON P/N Fan R0 KEY, WOODRUFF - /" x /" R BRACKET, TRANSMISSION, WELDED, EATON, ASSY R EATON HYDROSTATIC TRANSMISSION WITH OUTPUT SHAFT STRAIGHT CUT KEYWAY R R COUPLING, WELDED ASSY - EATON TRANS. KEY, ENGINE DRIVE, HONDA R0 NUT, HEX, NYLOC, ZP - /" UNF 0 R0 R0 BOLT, HEX, ZP -/" UNF x." LG SCREW, GRUB, BLK, FLAT POINT - /" UNF x /" LG R THREAD ROLLING SCREW, HEX WSHR HD, ZP, ga. x /" LG. RS0 COUPLING, DRIVE, WELDED, ENGINE 0 0 R0- Owners Manual

38 0 R0 R NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) PIN, ROLL, SPRING, ZP - M x LG R0 WASHER, FLAT, ZP - /" ID x " OD Eaton Transmission R00 R0 R0 R0 RS0 WASHER, SPRING, ZP - /" BOLT, HEX, ZP - /" UNF x " LG SCREW, GRUB, BLK, FLAT POINT - /" UNF x /" LG KEY, OUTPUT SHAFT, EATON DRIVE CHAIN 0B- 0 R BOLT, HEX, ZP - /" UNC x /" LG RS0 TRANS CHAIN & TENSIONERS ASSY R0- - PARTS LIST ITEM QTY STOCK NO. R0 SPRING, TENSIONED, CHAIN ARM R BRACKET, TRANSMISSION, WELDED, EATON, ASSY R EATON HYDROSTATIC TRANSMISSION B R R WITH OUTPUT SHAFT STRAIGHT CUT KEYWAY SPROCKET, TOOTH, TRANS. CHAIN 0B- DRIVE CHAIN SPLIT LINK ASSY 0 R - RH () R E0 CHAIN TENSIONER ASSY, COMPLETE CHAIN TENSION GUIDE 0 R0 R R0 BUSH, BRONZE, CHAIN TENSIONER ARMS ARM, CHAIN TENSION, WELDED, ASSY WASHER, FLAT, ZP - /" ID x /" OD 0 R0 R R0 NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) PIN, ROLL, SPRING, ZP - M x LG WASHER, FLAT, ZP - /" ID x " OD 0 R00 WASHER, SPRING, ZP - /" R0 R0 BOLT, HEX, ZP - /" UNF x " LG SCREW, GRUB, BLK, FLAT POINT - /" UNF x /" LG R0 KEY, OUTPUT SHAFT, EATON RS0 DRIVE CHAIN 0B- 0 R BOLT, HEX, ZP - /" UNC x /" LG & TENSIONERS ASSY R0- - PARTS LIST 0 TENSIONED, CHAIN ARM, TRANSMISSION, WELDED, EATON, ASSY HYDROSTATIC TRANSMISSION WITH OUTPUT SHAFT STRAIGHT CUT KEYWAY T, TOOTH, TRANS. CHAIN 0B- AIN SPLIT LINK ASSY ENSIONER ASSY, COMPLETE R - LH ENSION GUIDE ONZE, CHAIN TENSIONER ARMS IN TENSION, WELDED, ASSY, FLAT, ZP - /" ID x /" OD, NYLOC, P-TYPE, ZP - /"UNF (FULL) L, SPRING, ZP - M x LG, FLAT, ZP - /" ID x " OD, SPRING, ZP - /" X, ZP - /" UNF x " LG RUB, BLK, FLAT POINT - /" UNF x /" LG PUT SHAFT, EATON AIN 0B- DETAIL - B A X, ZP - /" UNC x /" LG R B 0 R - RH R0 KEY EATON OUTPUT SHAFT DETAIL - A 0 R0- Owners Manual

39 ITEM Yoke & Struts RS0 YOKE & STRUTS - PARTS LIST ITEM QTY. STOCK NUMBER R TRANSMISSION YOKE R0 WASHER, FLAT, ZP - /" ID x /" OD R0 NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) R00 NUT, HEX, NYLOC, ZP - /" UNC R0 BOLT, HEX, ZP - /" UNF x." LG R0 WASHER, FLAT, ZP - /" x " OD 0 R0 BALL, STUD, mm, LRG FLANGE, ZP R WASHER, ACETAL -. x. X. R NUT, HEX, NYLOC, P-TYPE, ZP - M 0 R0 SPACER, STRUT YOKE, PEDAL, TRANSMISSION ( REF.) R SLIDE UPGRADE KIT R STRUT. TRANSMISSION, ASSY R CLIP, RETAINER, CUP END mm (R), GAS STRUT R0 CLIP, RETAINER, CUP END, 0mm, SHORT, GAS STRUT QTY. ( REF.) RS0 YOKE & STRUTS - PARTS LIST STOCK NUMBER R TRANSMISSION YOKE R0 WASHER, FLAT, ZP - /" ID x /" OD R0 NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) R00 NUT, HEX, NYLOC, ZP - /" UNC R0 BOLT, HEX, ZP - /" UNF x." LG R0 WASHER, FLAT, ZP - /" x " OD R0 BALL, STUD, mm, LRG FLANGE, ZP R WASHER, ACETAL -. x. X. R NUT, HEX, NYLOC, P-TYPE, ZP - M R0 SPACER, STRUT YOKE, PEDAL, TRANSMISSION R SLIDE UPGRADE KIT R STRUT. TRANSMISSION, ASSY R CLIP, RETAINER, CUP END mm (R), GAS STRUT R0 CLIP, RETAINER, CUP END, 0mm, SHORT, GAS STRUT R CUP END FOR 0mm BALL (WAS R) R CUP END, mm BALL JOINT ( WAS R) Refer to the Maintenance Section for instructions regarding the adjustment of the struts. R CUP END FOR 0mm BALL (WAS R) R CUP END, mm BALL JOINT ( WAS R) BOTH ROD ENDS STRUTS TO ATTACH ON THE BALL STUDS FITTED TO R0- BODY REAR M SOCKETS SLIDE UPGRADE KIT (REF. ONLY) 0 TO ATTACH TO R0 TRANSMISSION CONNECTING ROD R0- Owners Manual

40 Foot Pedal Assembly B A RS0 FOOT PEDAL ASSY EXPLODED R0- - PARTS LIST TRI0 SHAFT, FOOT PEDAL RS0 PEDAL, FOOT PEDAL, WELDED, ASSY R0 BUSH, ACETYL - Dia. x LG. RS0 ARM, WELDED, TRANS SELECTOR, FOOT PEDAL R KEY, WOODRUFF - /" x /" Dia. R0 PAD, FOOT PEDAL R00 NUT, HEX, NYLOC, ZP - /" UNC R0 ROD UNIT, TRANSMISSION YOKE, ASSY R0 BOLT, HEX, ZP - /" UNF x." LG 0 R0 NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) R0 WASHER, FLAT, ZP - /" ID x /" OD C R0 REV A ROD UNIT TRANSMISSION YOKE - PARTS LIST A A B R R ROD, THREADED - /" UNF ROD END - /" UNF C C R0 NUT, HEX, ZP - /" UNF B 0 DETAIL - A RS0 FOOT PEDAL ASSY EXPLODED R0- - PARTS LIST ITEM QTY PART NUMBER TRI0 SHAFT, FOOT PEDAL RS0 PEDAL, FOOT PEDAL, WELDED, ASSY R0 BUSH, ACETYL - Dia. x LG. RS0 ARM, WELDED, TRANS SELECTOR, FOOT PEDAL R KEY, WOODRUFF - /" x /" Dia. R0 PAD, FOOT PEDAL A R00 R0 NUT, HEX, NYLOC, ZP - /" UNC ROD UNIT, TRANSMISSION YOKE, ASSY R0 BOLT, HEX, ZP - /" UNF x." LG B 0 R0 R0 NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) WASHER, FLAT, ZP - /" ID x /" OD C R0 REV A ROD UNIT TRANSMISSION YOKE - PARTS LIST R0- Owners Manual A C A B C R R R0 ROD, THREADED - /" UNF ROD END - /" UNF NUT, HEX, ZP - /" UNF

41 Joystick & Steering Shaft Assembly RS00 JOYSTICK & STEERING SHAFT ASSY EXPLODED - PARTS LIST ITEM QTY PART NUMBER RS0 RS0 ARM, STEERING, WELDED, ASSY - /" UNF JOYSTICK, WELDED, ASSY RS00 JOYSTICK & STEERING SHAFT ASSY EXPLODED - PARTS LIST RS0 ARM, STEERING, WELDED, ASSY - /" UNF RS0 JOYSTICK, WELDED, ASSY R00 R0 R GRIP, JOYSTICK - mm Dia. SPRING, EXTENSION, ZP - Ø/"xg.x" LG KEY, WOODRUFF - /" x /" Dia. R00 R0 R R00 GRIP, JOYSTICK - mm Dia. SPRING, EXTENSION, ZP - Ø/"xg.x" LG KEY, WOODRUFF - /" x /" Dia. JOYSTICK SHAFT, WELDED, ASSY R00 R0 R0 JOYSTICK SHAFT, WELDED, ASSY BALL BEARING S0-RS (0xx0) NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) 0 R0 R0 R00 R00 BALL BEARING S0-RS (0xx0) NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) NUT, HEX, NYLOC, ZP - /" UNC BOLT, HEX, ZP /" UNF x." LG R00 NUT, HEX, NYLOC, ZP - /" UNC R0 NUT, HEX, NYLOC, ZP - /" UNF 0 R00 R0 BOLT, HEX, ZP /" UNF x." LG NUT, HEX, NYLOC, ZP - /" UNF 0 RS0 STEERING ROD CONNECTING ASSY EXPLODED - PARTS LIST ITEM QTY PART NO. A B RS0 RS0 TUBE, TIE ROD, STEERING ROD, THREADED, STEERING - /" UNF C D R R ROD END, FEMALE - /"UNF (ALINABAL) NUT, HEX, ZP - /" UNF RS0 STEERING ROD CONNECTING ASSY C D A D 0 C RS0 STEERING ROD CONNECTING ASSY EXPLODED - PARTS LIST ITEM QTY PART NO. A RS0 TUBE, TIE ROD, STEERING B RS0 ROD, THREADED, STEERING - /" UNF C D R R ROD END, FEMALE - /"UNF (ALINABAL) NUT, HEX, ZP - /" UNF RS0 STEERING ROD CONNECTING ASSY C D A D C R0- Owners Manual

42 Park Brake Lever & Switch PARK BRAKE LEVER & SWITCH - PARTS LIST RS PARK BRAKE LEVER & SWITCH ASSY RS COVER, SAFETY, S/S, HANDBRAKE LEVER T0 CABLE ASSY - PARK DRUM BRAKE TYPE E0 CLIP, P, 0 mm R0 HAND BRAKE LEVER ASSY R0 PIN, SPLIT, ZP - M- x 0 LG R0 WASHER, FLAT, SAE, ZP - /" x /" R00 WASHER, SPRING, ZP - /" R0 NUT, HEX, NYLOC - /" UNF 0 R0 NUT, HEX, NYLOC, ZP - /" UNF R0 BOLT, HEX, ZP - /" UNF x -/" LG R0 BOLT, HEX, ZP, /"UNF x " LG R WASHER, FLAT, SS - /" x /" R0 NUT, HEX, NYLOC, SS - /" UNF R CIRCLIP, PARK BRAKE CABLE R SLIDE PIN, HAND BRAKE LEVER R BOLT, HEX, ZP - /" UNF x /" LG R MOUNT BRACKET - SWITCH R BRACKET, SWITCH ACTIVATION 0 R SWITCH R SCREW, MACHINE, - /" UNF x -/" LG R0 MOUNTING KIT - PARTS AS SHOWN 0 PARK BRAKE LEVER & SWITCH PARK BRAKE SWITCH CABLE IS USED IN THE MAIN HARNESS LOOM (RS0) 0 PARK BRAKE LEVER & SWITCH - PARTS LIST ITEM QTY PART NUMBER RS PARK BRAKE LEVER & SWITCH ASSY R0- Owners Manual RS T0 E0 COVER, SAFETY, S/S, HANDBRAKE LEVER CABLE ASSY - PARK DRUM BRAKE TYPE CLIP, P, 0 mm 0

43 Park Brake R0- PARK BRAKE SYSTEM - ISOMETRIC VIEW - PARTS LIST RS PARK BRAKE LEVER & SWITCH ASSY RS COVER, SAFETY, S/S, HANDBRAKE LEVER R0 DRUM BRAKE ASSY - FLEX TUBE DRIVE ROLLER T0 CABLE ASSY - PARK DRUM BRAKE TYPE R0- PARK BRAKE SYSTEM - ISOMETRIC VIEW - PARTS LIST RS PARK BRAKE LEVER & SWITCH ASSY RS COVER, SAFETY, S/S, HANDBRAKE LEVER R0 DRUM BRAKE ASSY - FLEX TUBE DRIVE ROLLER T0 CABLE ASSY - PARK DRUM BRAKE TYPE DETAIL A BRAKE HANDLE IN ON POSITION SHOWN ( : ) DETAIL A BRAKE HANDLE IN OFF POSITION SHOWN ( :. ) DETAIL B ( :. ) A B R0- Owners Manual

44 RS00 BODY, WELDED, ASSY R0 BUSH, ACETYL - Dia. x LG. Under Body 0 R0 R0 R0 R R BUFFER STOP, UNDER BODY WASHER, FLAT, SAE, ZP - /" ID x /" OD NUT, HEX, ZP - M NUT, HEX, NYLOC, P-TYPE, ZP - M CABLE TIE - 00 X. (BRAKE CABLE) R0 SCREW, TEK, ZP, 0-x E0 P CLIP (0mm) ITEM RS00 UNDER BODY ASSY R0- EXPLODED - PARTS LIST QTY PART NUMBER RS00 BODY, WELDED, ASSY RS RS R0 MUD FLAP STRAP, MUDFLAP, SCREW ON NUT, HEX, NYLOC, ZP - /" UNF R0 BUSH, ACETYL - Dia. x LG. R0 BUFFER STOP, UNDER BODY 0 R0 WASHER, FLAT, SAE, ZP - /" ID x /" OD R0 NUT, HEX, ZP - M R R R0 E0 RS RS R0 NUT, HEX, NYLOC, P-TYPE, ZP - M CABLE TIE - 00 X. (BRAKE CABLE) SCREW, TEK, ZP, 0-x P CLIP (0mm) MUD FLAP STRAP, MUDFLAP, SCREW ON NUT, HEX, NYLOC, ZP - /" UNF 0 HAND BRAKE CABLE ROUTE 0 R0- Owners Manual

45 RS0 OVERLAPPING SMOOTHING HEAD, STD., REAR, ASSY, COMPLETE RS00 TIE ROD ASSY, /"UNF (STEER SMOOTHING HEADS) E BEARING UNIT ASSY UCF0 R BEARING, UCP0, PILLOW BLOCK ASSY Smoothing Heads & Pivot Beam R0 WASHER, FLAT, ZP - /" ID x /" OD R0 WASHER, SPRING, ZP - /" R0 NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) 0 R0 BOLT, HEX, ZP - /" UNF x." LG R00 BOLT, HEX, ZP /" UNF x." LG R0 NUT, HEX, ZP - /" UNF R WASHER, MOULDED, RUBBER, DAMPNER R0 BOLT, HEX, ZP - /" UNF x /" LG (Included in both Smoothing Head Assemblies) R0 WASHER, SPRING, ZP - /" (Included in both Smoothing Head Assemblies) RS SPACER, STEERING, HEAD & ARM RS0 CAP, SHS END, PLASTIC, BLACK -." SQ. Included in both Smoothing Head Assemblies 0 ITEM 0 RS0 OVERLAPPING SMOOTHING HEADS & R0 PIVOT BEAM - PARTS LIST QTY PART NUMBER RS0 PIVOT BEAM, WELDED, SMOOTHING HEAD ASSY RS0 OVERLAPPING SMOOTHING HEAD, STD., FRONT, ASSY, COMPLETE RS0 OVERLAPPING SMOOTHING HEAD, STD., REAR, ASSY, COMPLETE RS00 TIE ROD ASSY, /"UNF (STEER SMOOTHING HEADS) E BEARING UNIT ASSY UCF0 R BEARING, UCP0, PILLOW BLOCK ASSY R0 WASHER, FLAT, ZP - /" ID x /" OD R0 WASHER, SPRING, ZP - /" R0 NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) R0 BOLT, HEX, ZP - /" UNF x." LG R00 BOLT, HEX, ZP /" UNF x." LG R0 NUT, HEX, ZP - /" UNF R WASHER, MOULDED, RUBBER, DAMPNER R0 BOLT, HEX, ZP - /" UNF x /" LG (Included in both Smoothing Head Assemblies) R0 WASHER, SPRING, ZP - /" (Included in both Smoothing Head Assemblies) RS SPACER, STEERING, HEAD & ARM RS0 CAP, SHS END, PLASTIC, BLACK -." SQ. Included in both Smoothing Head Assemblies R0- Owners Manual

46 R WASHER, MOULDED, RUBBER, DAMPNER 0 R BOLT, CSK, ZP - /" UNF x " LG Front Smoothing Head Assembly R0 R0 R0 R00 E BOLT, HEX. HEAD - /" UNF x " LG. BOLT, HEX, ZP - /" UNF x /" LG WASHER, SPRING, ZP - /" WASHER, SPRING, ZP - /" BEARING UNIT ASSY UCF0 RS0 FRONT SMOOTHING HEAD ASSY EXPLODED - PARTS LIST RS0 RS00 RS0 COVER, FRT, WELDED, SMOOTHING HEAD ASSY SMOOTHING ROLLER, LONG, COMPLETE ASSY SHAFT ASSY, SWEEPER, RUBBER ROLLER - COMPLETE RS PLATE, END GUIDE, THREADED, ROLLER NODULE CLEANER R R SMOOTHING ROLLER COMPLETE ASSY RUBBER ROLLER SWEEPER SHAFT COMPLETE ASSY R R SET SCREW, CSK, ZP - /" UNF x /" LG SET SCREW, HEX, ZP - /" UNF x /" LG R WASHER, MOULDED, RUBBER, DAMPNER 0 R BOLT, CSK, ZP - /" UNF x " LG R0 R0 BOLT, HEX. HEAD - /" UNF x " LG. BOLT, HEX, ZP - /" UNF x /" LG R0 R00 E WASHER, SPRING, ZP - /" WASHER, SPRING, ZP - /" BEARING UNIT ASSY UCF0 0 0 R0- Owners Manual

47 R R SET SCREW, HEX, ZP - /" UNF x /" LG WASHER, MOULDED, RUBBER, DAMPNER Rear Smoothing Head Assembly 0 R R0 R0 R0 R00 E BOLT, CSK, ZP - /" UNF x " LG BOLT, HEX. HEAD - /" UNF x " LG. BOLT, HEX, ZP - /" UNF x /" LG WASHER, SPRING, ZP - /" WASHER, SPRING, ZP - /" BEARING UNIT ASSY UCF0 RS0 REAR SMOOTHING HEAD ASSY EXPLODED - PARTS LIST ITEM QTY PART NUMBER RS0 COVER, REAR, SMOOTHING HEAD, WELDED ASSY RS00 R R SMOOTHING ROLLER, LONG, COMPLETE ASSY SMOOTHING ROLLER COMPLETE ASSY RUBBER ROLLER SWEEPER SHAFT COMPLETE ASSY RS R R R R PLATE, END GUIDE, THREADED, ROLLER NODULE CLEANER SET SCREW, CSK, ZP - /" UNF x /" LG SET SCREW, HEX, ZP - /" UNF x /" LG WASHER, MOULDED, RUBBER, DAMPNER BOLT, CSK, ZP - /" UNF x " LG 0 0 R0 BOLT, HEX. HEAD - /" UNF x " LG. R0 BOLT, HEX, ZP - /" UNF x /" LG R0 R00 E WASHER, SPRING, ZP - /" WASHER, SPRING, ZP - /" BEARING UNIT ASSY UCF0 0 R0- Owners Manual

48 RS0 R0 SMOOTHING HEAD ROLLER CLEANING NODULES OPTION - PARTS LIST Smoothing Head Cleaning Nodules REF. RS FRONT OVERLAPPING SMOOTHING HEAD ASSY COMPLETE WITH NODULE CLEANER SHAFTS REF. RS REAR OVERLAPPING SMOOTHING HEAD ASSY COMPLETE WITH NODULE CLEANER SHAFTS RS0 SHAFT ASSY, SWEEPER, RUBBER ROLLER - COMPLETE R RUBBER ROLLER SWEEPER SHAFT COMPLETE ASSY RS0 R0 SMOOTHING HEAD ROLLER CLEANING NODULES OPTION - PARTS LIST RS R R PLATE, END GUIDE, THREADED, ROLLER NODULE CLEANER SET SCREW, CSK, ZP - /" UNF x /" LG SET SCREW, HEX, ZP - /" UNF x /" LG REF. REF. RS RS FRONT OVERLAPPING SMOOTHING HEAD ASSY COMPLETE WITH NODULE CLEANER SHAFTS REAR OVERLAPPING SMOOTHING HEAD ASSY COMPLETE WITH NODULE 0 RS0 CLEANER SHAFTS SHAFT ASSY, SWEEPER, RUBBER ROLLER - COMPLETE R RS RUBBER ROLLER SWEEPER SHAFT COMPLETE ASSY PLATE, END GUIDE, THREADED, ROLLER NODULE CLEANER R SET SCREW, CSK, ZP - /" UNF x /" LG R SET SCREW, HEX, ZP - /" UNF x /" LG ASS'Y REQ'D ITEM - R RUBBER ROLLER SWEEPER SHAFT COMPLETE ASSY - PARTS LIST R0 SHAFT, RUBBER ROLLER SWEEPER ASS'Y REQ'D 0 R RUBBER ROLLER SWEEPER - ( Nodes x 0 deg.) 0 W0 WASHER, FLAT - /" x -/" x ga RS0 BUSH, ACETAL, ID x OD x W, SWEEPER SHAFT ITEM - RS0 LONG RUBBER ROLLER SWEEPER COMPLETE ASSY - PARTS LIST R RUBBER ROLLER SWEEPER - ( Nodes x 0 deg.) 0 W0 WASHER, FLAT - /" x -/" x ga RS0 BUSH, ACETAL, ID x OD x W, SWEEPER SHAFT RS0 SHAFT, LONG, RUBBER ROLLER SWEEPER 0 ASS'Y REQ'D ITEM - R RUBBER ROLLER SWEEPER SHAFT COMPLETE ASSY - PARTS LIST R0 SHAFT, RUBBER ROLLER SWEEPER 0 R RUBBER ROLLER SWEEPER - ( Nodes x 0 deg.) 0 W0 WASHER, FLAT - /" x -/" x ga RS0 BUSH, ACETAL, ID x OD x W, SWEEPER SHAFT R0- Owners Manual ASS'Y REQ'D ITEM - RS0 LONG RUBBER ROLLER SWEEPER COMPLETE ASSY - PARTS LIST R RUBBER ROLLER SWEEPER - ( Nodes x 0 deg.) 0 W0 WASHER, FLAT - /" x -/" x ga

49 Smoothing Roller Assembly SMOOTHING ROLLER ASSEMBLIES TYPICAL FITTED END CROSS-SECTION R (SHORT ROLLER) R SMOOTHING ROLLER COMPLETE ASSY - PARTS LIST R TUBE & ENDS ONLY, SMOOTHING ROLLER R SHAFT, SMOOTHING ROLLER R BEARING, S/S - 00-RS R0 SEAL, END CAP - 0xx0 R CIRCLIP, INTERNAL, BLK - Dia TYPICAL FITTED END CROSS-SECTION R (SHORT ROLLER) ITEM R SMOOTHING ROLLER COMPLETE ASSY R - PARTS LIST CIRCLIP, INTERNAL, BLK - Dia QTY PART NUMBER R0 SEAL - 0 ID x OD x0 R TUBE & ENDS ONLY, SMOOTHING ROLLER R BEARING, S/S - 00-RS R SHAFT, SMOOTHING ROLLER R BEARING, S/S - 00-RS RS0 TUBE, LONG & ENDS ONLY ASSY R0 SEAL, END CAP - 0xx0 RS0 SHAFT, LONG, SMOOTHING ROLLER RS00 (LONG ROLLER) RS00 SMOOTHING ROLLER COMPLETE ASSY - PARTS LIST R CIRCLIP, INTERNAL, BLK - Dia R SMOOTHING ROLLER COMPLETE ASSY - PARTS LIST R TUBE & ENDS ONLY, SMOOTHING ROLLER R (SHORT ROLLER) R R R0 R SHAFT, SMOOTHING ROLLER BEARING, S/S - 00-RS SEAL, END CAP - 0xx0 CIRCLIP, INTERNAL, BLK - Dia RS00 SMOOTHING ROLLER COMPLETE ASSY - PARTS LIST R CIRCLIP, INTERNAL, BLK - Dia RS00 (LONG ROLLER) R0 R RS0 RS0 SEAL - 0 ID x OD x0 BEARING, S/S - 00-RS TUBE, LONG & ENDS ONLY ASSY SHAFT, LONG, SMOOTHING ROLLER RS00 (LONG ROLLER) RS00 SMOOTHING ROLLER COMPLETE ASSY - PARTS LIST R CIRCLIP, INTERNAL, BLK - Dia R0 SEAL - 0 ID x OD x0 R BEARING, S/S - 00-RS RS0 TUBE, LONG & ENDS ONLY ASSY RS0 SHAFT, LONG, SMOOTHING ROLLER R0- Owners Manual RS00 SMOOTHING ROLLER COMPLETE ASSY - PARTS LIST R CIRCLIP, INTERNAL, BLK - Dia

50 Connecting Rods RS00 SMOOTHING HEADS STEER TIE ROD ASSY - PARTS LIST 0 [. in] 0 [. in THRU [. in] 0 [0.0 THRU [. in] R0- CONNECTING RODS RS00 RS0 R R R0 ROD, THREADED, BROOKER - /" UNF TUBE, TIE ROD, STEER SMOOTHING HEADS ROD END, FEMALE, STUDDED - -UNF (ALINABAL) NUT, HEX, ZP - /" UNF NUT, HEX, NYLOC, ZP - /" UNF 0 RS00 SMOOTHING HEADS STEER TIE ROD ASSY - PARTS LIST RS00 ROD, THREADED, BROOKER - /" UNF RS0 TUBE, TIE ROD, STEER SMOOTHING HEADS R ROD END, FEMALE, STUDDED - -UNF (ALINABAL) R NUT, HEX, ZP - /" UNF R0 NUT, HEX, NYLOC, ZP - /" UNF ITEM RS0 JOYSTICK STEERING CONNECTING ROD ASSY - PARTS LIST QTY PART NUMBER RS0 ROD, THREADED, STEERING - /" UNF RS0 TUBE, TIE ROD, STEERING R ROD END, FEMALE R0 - /"UNF (ALINABAL) R NUT, HEX, FOOT ZP PEDAL - /" TO UNF TRANSMISSION YOKE TIE ROD ASSY RS0 JOYSTICK STEERING CONNECTING ROD ASSY RS0 JOYSTICK STEERING CONNECTING ROD ASSY - PARTS LIST RS0 ROD, THREADED, STEERING - /" UNF RS0 TUBE, TIE ROD, STEERING R ROD END, FEMALE - /"UNF (ALINABAL) R NUT, HEX, ZP - /" UNF R0 FOOT PEDAL TO TRANSMISSION YOKE TIE ROD ASSY - PARTS LIST R ROD, THREADED, TRANSMISSION YOKE, /" UNF 0 R ROD END - /" UNF R0 NUT, HEX, ZP - /" UNF RS00 SMOOTHING HEADS STEER TIE ROD ASSY 0 0 [. in] [. in] 0 [0.0 in] THRU [. in] 0 [. in] THRU 0 R0 FOOT PEDAL TO TRANSMISSION YOKE TIE ROD ASSY RS0 JOYSTICK STEERING CONNECTING ROD ASSY R0 FOOT PEDAL TO TRANSMISSION YOKE TIE ROD ASSY - PARTS LIST 0 R R R0 ROD, THREADED, TRANSMISSION YOKE, /" UNF ROD END - /" UNF NUT, HEX, ZP - /" UNF RS00 SMOOTHING HEADS STEER TIE ROD ASSY R0- Owners Manual

51 EL WASHER - M0xx R BEARING UNIT ASSY - SBLF0 R0 WASHER, FLAT, ZP - /" ID x /" OD Flex Tube Roller Assembly R0 R0 R0 R0 WASHER, SPRING, ZP - /" NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) BOLT, HEX. HEAD - /" UNF x " LG. BOLT, HEX, ZP, /" UNF x." LG 0 R0 BOLT, HEX, ZP - /" UNF x " LG R0 SCREW, GRUB, CUP POINT - M x E0 FLEX TUBE ROLLER ASSY R0- EXPLODED - PARTS LIST E0 FLEX TUBE DRIVE ROLLER ASSY R KEY, STEEL, xx 0 E EL R SPROCKET, DRIVE ROLLER, TYPE 0B WASHER - M0xx BEARING UNIT ASSY - SBLF0 R0 WASHER, FLAT, ZP - /" ID x /" OD R0 R0 R0 R0 WASHER, SPRING, ZP - /" NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) BOLT, HEX. HEAD - /" UNF x " LG. BOLT, HEX, ZP, /" UNF x." LG A 0 0 R0 R0 R BOLT, HEX, ZP - /" UNF x " LG SCREW, GRUB, CUP POINT - M x KEY, STEEL, xx DETAIL A FRONT BEARING ASSEMBLY B DETAIL B REAR BEARING & SPROCKET ASSY R0- Owners Manual

52 Flex Drive Roller ITEM QTY E0 FLEX DRIVE ROLLER - PARTS LIST STOCK NUMBER ITEM QTY E0 FLEX DRIVE ROLLER - PARTS LIST STOCK NUMBER E SHAFT, WELDED ASSY E0 COUPLING, FLEX TUBE E DRIVE CENTRE, INSERT, POLYURETHANE E0 OUTER CLAMP RING E0 INNER CLAMP RING 0 0 E E0 E E0 E0 E R0 R0 SHAFT, WELDED ASSY COUPLING, FLEX TUBE DRIVE CENTRE, INSERT, POLYURETHANE OUTER CLAMP RING INNER CLAMP RING TUBE & DRIVE WELDED ASSY - RUBBER COATED WASHER, SPRING, ZP - /" BOLT, HEX, ZP - /" UNF x " LG E TUBE & DRIVE WELDED ASSY - RUBBER COATED 0 R0 WASHER, SPRING, ZP - /" 0 R0 BOLT, HEX, ZP - /" UNF x " LG DETAIL - A E0 TO REPLACE SPACER, CUT HERE ONLY. USE POYURETHANE GLUE TO REJOIN CUT AFTER PLACING NEW SPACER OVER SHAFT. A R0- Owners Manual 0

53 Driver Roller & Drum Brake Assembly R0 NUT, HEX, NYLOC, ZP - /" UNF (SUPPLIED WITH ITEM ) R BOLT, HEX, ZP - /" UNF x /" LG (SUPPLIED WITH ITEM ) R0- DRIVE ROLLER & DRUM BRAKE ASSY EXPLODED - PARTS LIST R0 WASHER, SPRING, ZP - /" 0 E0 FLEX R0 TUBE DRIVE BOLT, ROLLER HEX ASSY HD, ZP - /" UNC x " LG EL WASHER R0 - M0xx BOLT, HEX. HEAD - /" UNF x " LG. BEARING R UNIT ASSY NUT, - SBLF0 HEX, NYLOC, S/S - /" UNC DRUM BRAKE ASSY - FLEX TUBE DRIVE ROLLER T0 CABLE ASSY - PARK DRUM BRAKE TYPE DRUM BRAKE UNIT (SUPPLIED WITH ITEM ) R0- DRIVE ROLLER & DRUM BRAKE ASSY EXPLODED - PARTS LIST R0 BRACKET, MOUNT, DRUM BRAKE (SUPPLIED WITH ITEM ) R0 NUT, HEX, NYLOC, ZP - /" UNF (SUPPLIED WITH ITEM ) E0 FLEX TUBE DRIVE ROLLER ASSY R BOLT, HEX, ZP - /" UNF x /" LG (SUPPLIED WITH ITEM ) EL WASHER - M0xx R0 WASHER, SPRING, ZP - /" R BEARING UNIT ASSY - SBLF0 0 R0 BOLT, HEX HD, ZP - /" UNC x " LG () R0 DRUM BRAKE ASSY - FLEX TUBE DRIVE ROLLER R0 BOLT, HEX. HEAD - /" UNF x " LG. R00 DRUM BRAKE UNIT (SUPPLIED WITH ITEM ) R NUT, HEX, NYLOC, S/S - /" UNC R0 BRACKET, MOUNT, DRUM BRAKE (SUPPLIED WITH ITEM ) 0 R0 NUT, HEX, NYLOC, ZP - /" UNF SIDE (SUPPLIED VIEW WITH ITEM ASSEMBLIED ) IN BODY T0 CABLE ASSY - PARK DRUM BRAKE TYPE R BOLT, HEX, ZP - /" UNF x /" LG (SUPPLIED WITH ITEM ) R0 WASHER, SPRING, ZP - /" 0 R0 BOLT, HEX HD, ZP - /" UNC x " LG R0 BOLT, HEX. HEAD - /" UNF x " LG. R NUT, HEX, NYLOC, S/S - /" UNC T0 CABLE ASSY - PARK DRUM BRAKE TYPE 0 SIDE VIEW ASSEMBLIED IN BODY () R R0 R00 R0- DRIVE ROLLER & DRUM BRAKE ASSY EXPLODED - PARTS LIST E0 FLEX TUBE DRIVE ROLLER ASSY EL WASHER - M0xx R BEARING UNIT ASSY - SBLF0 () R0 DRUM BRAKE ASSY - FLEX TUBE DRIVE ROLLER R00 DRUM BRAKE UNIT (SUPPLIED WITH ITEM ) R0 BRACKET, MOUNT, DRUM BRAKE (SUPPLIED WITH ITEM ) R0 NUT, HEX, NYLOC, ZP - /" UNF (SUPPLIED WITH ITEM ) 0 R R0 R0 R0 R T0 BOLT, HEX, ZP - /" UNF x /" LG (SUPPLIED WITH ITEM ) WASHER, SPRING, ZP - /" BOLT, HEX HD, ZP - /" UNC x " LG BOLT, HEX. HEAD - /" UNF x " LG. NUT, HEX, NYLOC, S/S - /" UNC CABLE ASSY - PARK DRUM BRAKE TYPE SIDE VIEW ASSEMBLIED IN BODY ASSEMBLIED IN ROLLER 0 DRUM BRAKE ASSEMBLIED IN ROLLER R0- Owners Manual

54 E00 BUSH, BRONZE, FLANGED E00 BUSH, PLAIN, BRONZE R0 WHEEL HUB COMPLETE PARALLEL AXLE Trailer Assembly R0 R0 NUT, WHEEL, / "UNF (USA) WHEEL, STUD, " TYRE VIBRATING LOOSE FITTING R0 TO BODY RS TRAILER PARALLEL AXLES ASSY - PARTS LIST ITEM QTY PART NO. RS DRAWBAR, STRAIGHT, PIN TOWING HITCH, ASSY R0 STRUT, GAS, KIT R0 PIN, SPLIT, ZP - M. x 0 LG. 0 R0 R0 R0 R0 BOLT, HEX, ZP - M0 x 0 LG A NUT, HEX, ZP - M0 WASHER, FLAT, ZP - /" ID x /" OD NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) R WASHER, FLAT, ZP - M0 DETAIL - B R0 BOLT, HEX, ZP, /" UNF x." LG. R TRAILER ARM, LH, WELDED, ASSY - PARALLEL AXLE R TRAILER ARM, RH, WELDED, ASSY - PARALLEL AXLE E00 BUSH, BRONZE, FLANGED B E00 BUSH, PLAIN, BRONZE R0 WHEEL HUB COMPLETE PARALLEL AXLE R0 NUT, WHEEL, / "UNF (USA) R0 WHEEL, STUD, " TYRE RS TRAILER PARALLEL AXLES ASSY - PARTS LIST ITEM QTY PART NO. RS DRAWBAR, STRAIGHT, PIN TOWING HITCH, ASSY DETAIL - A R0 STRUT, GAS, KIT R0 PIN, SPLIT, ZP - M. x 0 LG. R0 BOLT, HEX, ZP - M0 x 0 LG 0 R0 NUT, HEX, ZP - M0 R0 WASHER, FLAT, ZP - /" ID x /" OD R0 NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) R WASHER, FLAT, ZP - M0 C R0 BOLT, HEX, ZP, /" UNF x." LG. 0 R TRAILER ARM, LH, WELDED, ASSY - PARALLEL AXLE R TRAILER ARM, RH, WELDED, ASSY - PARALLEL AXLE E00 BUSH, BRONZE, FLANGED E00 BUSH, PLAIN, BRONZE R0 WHEEL HUB COMPLETE PARALLEL AXLE R0 NUT, WHEEL, / "UNF (USA) R0 WHEEL, STUD, " TYRE MINIMUM GAP TO ALLOW STRUT TO ROTATE FREELY WHEN FITTING TO THE BODY USE LOCTITE ON THREADS TO PREVENT IT FROM VIBRATING LOOSE FITTING R0 TO BODY WHEN TRAILER DRAWBAR IS BEING ASSEMBLED THESE BOLTS & NUTS MUST BE CORRECTLY TIGHTENED TO FOOT-POUNDS OR.n-M. IF NOT THE DRAWBAR CAN BECOME LOOSE AND THE HOLES WILL WEAR MAKING IT DANGEROUS WHEN TOWING OR RAISING / LOWERING THE TRAILER. DETAIL - A A 0 DETAIL - B C B STARDARD STRAIGHT DRAWBAR TOWING HITCH ASSY COMPLETE DETAIL - C WHEN TRAILER DRAWBAR IS BEING ASSEMBLED THESE BOLTS & NUTS MUST BE CORRECTLY TIGHTENED TO FOOT-POUNDS OR.n-M. IF NOT THE DRAWBAR CAN BECOME LOOSE AND THE HOLES WILL WEAR MAKING IT DANGEROUS WHEN TOWING OR RAISING / LOWERING THE TRAILER. R0- Owners Manual

55 Trailer Hub R0 TRAILER HUB PARALLEL AXLE COMPLETE ASSY - PARTS LIST R0 CAP, HUB BEARING R0 PIN, COTTER, STUB (SPLIT) - M x 0 R0 NUT, WHEEL, / "UNF (USA) R0 SEAL, INNER HUB - CR 0 R00 BEARING, TAPERED ROLLER - L R0 WASHER, STUB AXLE (x) R0 NUT, CASTLE, STUB AXLE - /"- UNF R0 HUB, TRAILER, PARALLEL AXLE R0 TRAILER HUB PARALLEL AXLE COMPLETE ASSY - PARTS LIST R0 CAP, HUB BEARING R0 PIN, COTTER, STUB (SPLIT) - M x 0 R0 NUT, WHEEL, / "UNF (USA) R0 SEAL, INNER HUB - CR 0 R00 BEARING, TAPERED ROLLER - L R0 WASHER, STUB AXLE (x) R0 NUT, CASTLE, STUB AXLE - /"- UNF R0 HUB, TRAILER, PARALLEL AXLE 0. [0. in] /-0 UNF - B R0 WHEEL NUT /" UNF - USA WHEN ORDERING BEARINGS ENSURE THE CONE IS INCLUDED. IT IS COMMON FOR SOME BEARINGS TO BE SUPPLIED WITHOUT THE CONE. NOTE: R0 HUB IS PURCHASED AS A COMPLETE ASSEMBLY ITEM R0- Owners Manual

56 Pin Drawbar AssemblyRS DRAWBAR STRAIGHT PIN TOWING ASSY EXPLODED - PARTS LIST RS DRAWBAR, STD, WELDED, ASSY RS PLATE, LOCK, LEVER DRAWBAR, PIN HITCH, ASSY RS DRAWBAR STRAIGHT PIN TOWING ASSY EXPLODED - PARTS LIST RS0 CAP, SHS END, PLASTIC, BLACK -." SQ. RS0 LEVER, PIVOTING, WELDED, ASSY RS DRAWBAR, STD, WELDED, ASSY R0 BOLT, HEX, ZP, /" UNF x " LG RS PLATE, LOCK, LEVER DRAWBAR, PIN HITCH, ASSY R0 BOLT, HEX, ZP, /" UNF x." LG. RS0 CAP, SHS END, PLASTIC, BLACK -." SQ. R0 NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) RS0 LEVER, PIVOTING, WELDED, ASSY R0 NUT, HEX, NYLOC, ZP - /" UNF R0 BOLT, HEX, ZP, /" UNF x " LG R0 WASHER, FLAT, ZP - /" ID x /" OD R0 BOLT, HEX, ZP, /" UNF x." LG. 0 R0 GRIP, HAND - ID x 0 LG R0 NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) R0 NUT, HEX, NYLOC, ZP - /" UNF R0 WASHER, FLAT, ZP - /" ID x /" OD 0 R0 GRIP, HAND - ID x 0 LG 0 R0- Owners Manual

57 Milsco Seat ITEM R0 MILSCO SEAT WITH ARMS EXPLODED - PARTS LIST QTY PART NUMBER R MILSCO SEAT, ALL PVC WITH ARMS () R SEAT PAN ONLY, ALL PVC - MILSCO (PART OF MILSCO SEAT) () R ARM REST, NEW RH ASSY - MILSCO (PART OF MILSCO SEAT) () R ARM REST, NEW LH ASSY - MILSCO (PART OF MILSCO SEAT) MSC-0 SCREW, MOUNTING R0 SWITCH, OPERATOR OCCUPANCY, MILSCO SEAT REF. R0 DELTA PLUG A (PART OF COVER SEAT SWITCH LOOM RS) ITEM R0 MILSCO SEAT WITH ARMS EXPLODED - PARTS LIST QTY PART NUMBER R MILSCO SEAT, ALL PVC WITH ARMS () R SEAT PAN ONLY, ALL PVC - MILSCO (PART OF MILSCO SEAT) () R ARM REST, NEW RH ASSY - MILSCO (PART OF MILSCO SEAT) () R MSC-0 R0 ARM REST, NEW LH ASSY - MILSCO (PART OF MILSCO SEAT) SCREW, MOUNTING SWITCH, OPERATOR OCCUPANCY, MILSCO SEAT REF. R0 DELTA PLUG A (PART OF COVER SEAT SWITCH LOOM RS) A ITEM DELTA PLUG IS A COMPONENT OF THE WIRING LOOM (REFER ELECTRICAL CIRCUIT) DETAIL - A NOTE: WHEN FITTING THIS SEAT TO THE BASE PLATE THE RECOMMENDED DYNAMIC TORQUE FOR THE SEAT BOLTS IS 0± IN.LBS (DO NOT EXCEED 0 IN.LBS) ARMREST BRACKET BOLTS IS 0±0 IN.LBS R0- Owners Manual

58 R ARM REST, LH, ASSY, MILSCO Milsco Seat R MILSCO SEAT ALL PVC WITH ARMS - PARTS LIST R SEAT, ALL PVC PAN ONLY - MILSCO R ARM REST, RH, ASSY, MILSCO R ARM REST, LH, ASSY, MILSCO. [. in]. [. in]. [. in]. [. in] FITTING INS TRUCTIONS FITTING INS TR UCTIONS /- UNC - B x0 vø /- UNC - B x0 vø NOTE: WHEN FITTING THIS NOTE: SEAT WHEN TO THE FITTING BASE PLATE THIS SEAT TO THE BASE PLATE THE RECOMMENDED DYNAMIC THE RECOMMENDED TORQUE FOR THE DYNAMIC SEAT TORQUE FOR THE SEAT BOLTS IS 0± IN.LBS (DO BOLTS NOT EXCEED IS 0±0 IN.LBS IN.LBS) (DO NOT EXCEED 0 IN.LBS) ARMREST BRACKET BOLTS IS 0±0 IN.LBS ARMREST BRACKET BOLTS IS 0±0 IN.LBS BOTTOM VIEW BOTTOM VIEW R MILSCO SEAT ALL PVC WITH ARMS - PARTS LIST ARMRESTS NOW ATTACH TO SIDE OF SEAT PAN USING SPEED CLIPS & HEX HEAD ARMRESTS TAPPING NOW SCREWS ATTACH TO SIDE OF SEAT PAN R SEAT, ALL PVC PAN ONLY - MILSCO R ARM REST, RH, ASSY, MILSCO USING SPEED CLIPS & HEX HEAD TAPPING SCREWS R ARM REST, LH, ASSY, MILSCO. [. in]. [. in] /- UNC - B x0 vø FITTING INS TRUCTIONS NOTE: WHEN FITTING THIS SEAT TO THE BASE PLATE THE RECOMMENDED DYNAMIC TORQUE FOR THE SEAT SIDE VIEW BOLTS IS 0± IN.LBS (DO NOT EXCEED 0 IN.LBS) ARMREST BRACKET BOLTS IS 0±0 IN.LBS SIDE VIEW BOTTOM VIEW ARMRESTS NOW ATTACH TO SIDE OF SEAT PAN USING SPEED CLIPS & HEX HEAD TAPPING SCREWS R0- Owners Manual

59 Options - H Frame RS00 OPTION H FRAME & ENGAGING LEVER ASSY - PARTS LIST ITEM QTY PART NUMBER RS00 LEVER & ARM, OPTIONS ENGAGING, ASSY RS00 FRAME, OPTIONS MOUNT, WELDED ASSY RS0 PLATE, LABEL, OPTION ENGAGING LEVER SR0 PIN, SAFETY, ZP - /" DIA x." LG R0 BOLT, HEX, ZP - /" UNF x." LG R SPRING, RETURN, CAST SPIKER FRAME R0 RIVET, BLK, - R0 WASHER, FLAT, ZP - /" 0 RS00 PLATE, ADAPTOR, OPTIONS CARRIAGE R BEARING, UCP0, PILLOW BLOCK ASSY R0 R0 R0 R00 R0 WASHER, FLAT, ZP - /" ID x /" OD WASHER, SPRING, ZP 0- - /" NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) BOLT, HEX, ZP /" UNF x." LG NUT, HEX, NYLOC, ZP - /" UNF A DETAIL A 0 EVER ASSY - PARTS LIST ESCRIPTION GAGING, ASSY 0- WELDED ASSY AGING LEVER x." LG." LG A KER FRAME CARRIAGE BLOCK ASSY x /" OD P - /"UNF (FULL) DETAIL B OPTION CARRIAGE, BEARING & MTG. HARDWARE (FITTED BOTH ENDS OF ADDED OPTION TYPICAL) 0-." LG UNF 0 RS00 OPTION H FRAME & ENGAGING LEVER ASSY - PARTS LIST ITEM QTY PART NUMBER RS00 LEVER & ARM, OPTIONS ENGAGING, ASSY R0- Owners Manual RS00 RS0 SR0 FRAME, OPTIONS MOUNT, WELDED ASSY PLATE, LABEL, OPTION ENGAGING LEVER PIN, SAFETY, ZP - /" DIA x." LG

60 Options RS0 R0- AVAILABLE OPTIONS : PARTS LIST RS00 OPTION H FRAME & LEVER ASSY RS00 BRUSH OPTION ASSY COMPLETE RS0 SLICER OPTION ASSY COMPLETE RS00 PIN SPIKER OPTION ASSY COMPLETE ITEM RS0 R0- AVAILABLE OPTIONS : PARTS LIST QTY PART NUMBER RS00 OPTION H FRAME & LEVER ASSY RS00 BRUSH OPTION ASSY COMPLETE RS0 SLICER OPTION ASSY COMPLETE RS00 PIN SPIKER OPTION ASSY COMPLETE OPTION H FRAME & LEVER ASSY COMPLETE KIT P/N: RS00 SLICER OPTION ASSY COMPLETE KIT P/N: RS0 BRUSH OPTION ASSY COMPLETE KIT P/N: RS00 PIN SPIKER HUB OPTION ASSY COMPLETE KIT P/N: RS00 NOTE: THE OPTIONS ARE INTER-CHANGEABLE QUICKLY, AFTER RAISING THE BODY BY LOCKING INTO THE TRAILING POSITION, THEN RELEASING THE TWO () SAFTEY PINS HOLDING THE OPTION IN PLACE ALLOWING THE EXISTING OPTION AND IT'S CARRIAGE TO DROP OUT OF THE OPERATING 'H' FRAME LOCATION TO THE GROUND AND REVERSE THIS PRODEDURE TO INSTALL THE NEXT OPTION BY RAISING THE OPTION TO LOCATE ON TO THE 'H' FRAME, FINISHING BY LOCKING THE OPTION WITH THE SAFETY PIN ON BOTH FRAME SIDES. R0- Owners Manual

61 RS0 SLICER OPTION ASSY COMPLETE R0 - PARTS LIST ITEM QTY PART NUMBER RS00 PLATE, ADAPTOR, OPTIONS CARRIAGE RS0 SHAFT & COLLAR WELDED ASSY, SPIKER HUB RS SPACER, ID, SLICER SHAFT RS BLADE, SLICER, ID, POINT SR0 WASHER, FLAT, ZP - " R0 SPRING, SPACER, SLICER/SPIKER (DEFORMED. mm) R BEARING, UCP0, PILLOW BLOCK ASSY R0 WASHER, FLAT, ZP - /" ID x /" OD 0 R0 NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) R00 BOLT, HEX, ZP /" UNF x." LG R NUT, HEX, NYLOC, SS, M R BOLT, HEX HEAD, 0SS - M x LG R COLLAR, LOCKING, SHAFT, SPIKER HUB RS SPACER, ID, SLICER SHAFT RS BLADE, SLICER, ID, POINT SR0 WASHER, FLAT, ZP - " Options - Slitter 0 R0 R R0 R0 R00 SPRING, SPACER, SLICER/SPIKER (DEFORMED. mm) BEARING, UCP0, PILLOW BLOCK ASSY WASHER, FLAT, ZP - /" ID x /" OD NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) BOLT, HEX, ZP /" UNF x." LG R NUT, HEX, NYLOC, SS, M R BOLT, HEX HEAD, 0SS - M x LG R COLLAR, LOCKING, SHAFT, SPIKER HUB 0 SLICER ASSY COMPLETE R0 0 RS0 SLICER OPTION ASSY COMPLETE R0 EXPLODED VIEW SCALE ( : ) R0- Owners Manual

62 R0 R0 BOLT, HEX, ZP - /" UNF x " LG WASHER, FLAT, ZP - /" ID x /" OD R00 WASHER, SPRING, ZP - /" Options - Brush 0 R0 R0 R0 R0 R WASHER, SPRING, ZP - /" NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) BOLT, HEX. HEAD - /" UNF x " LG. RIVET, ALUMINIUM - WASHER, FLAT, SS - /" x /" T SHIM, WEAR, BRUSH OPTION BRUSH BRISTLE PREFERENCE ITEM A RS00 BRUSH OPTION KIT ASSEMBLY R0 - PARTS LIST QTY PART NUMBER RS0- BRUSH & EXTRUSION ASSY (STANDARD) RS0-0 BRUSH & EXTRUSION ASSY (AGGRESSIVE) RS0 BRACKET, LH, SIDE, MOUNT, BRUSH RS0 BRACKET, RH, SIDE, MOUNT, BRUSH RS00 PLATE, ADAPTOR, OPTIONS CARRIAGE R0 BOLT, HEX, ZP - /" UNF x " LG 0 NOTE: WHEN ORDERING THE BRUSH OPTION SPECIFY BRUSH BRISTLE PREFERENCE BE AWARE OF THE AVAILABLE BRUSH BRISTLE STRENGTH FOR YOUR NEED RS0- : STANDARD BRUSH BRISTLE (0.0" [0.mm]) RS0-0 : AGGRESSIVE BRUSH BRISTLE (0.00" [.0mm]) R0 R00 WASHER, FLAT, ZP - /" ID x /" OD WASHER, SPRING, ZP - /" 0 R0 R0 R0 WASHER, SPRING, ZP - /" NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) BOLT, HEX. HEAD - /" UNF x " LG. R0 R T RIVET, ALUMINIUM - WASHER, FLAT, SS - /" x /" SHIM, WEAR, BRUSH OPTION 0 SHIMS 0 OPTION H FRAME CARRIAGE 0 R0- Owners Manual 0

63 ALUMINIUM EXTRUSION TRACK IN OR OUT Options - Brush Insert Installation ALUMINIUM EXTRUSION CRIMP CRIMP BOTH SIDES OF TRACK TO CAPTURE INFIL IN PLACE INSTALLATION OF REPLACMENT BRUSH RIVET IS ONLY USED WITH RS0- (FLEXI STRIP), BUT IS NOT USED WITH BRUSH INFILL RS0-0 NOTE: SIDES OF AL. EXTN CRIMPED ON ONE() END & BOTH SIDES TO CAPTURE INFIL INSTEAD OF THE RIVET INSTALLATION OF SHIMS SHIMS (T) [SUPPLIED OFF] CAN BE INSERTED HERE ON BOTH SIDES TO COMPENSATE THE WEARING OF THE BRUSHES, AS REQUIRED WHEN NOT USING RIVET RIVET UNTIGHTEN THE BOLTS EQUALLY BY APPROX. -0mm BEFORE SLIDING THE PAIRS OF SHIMS (TRY AVOID THE REMOVING OF THE BOLTS FROM THE CARRIAGE PLATES, SO NOT TO START THREAD AGAIN) BRUSH & EXTRUSION ASSEMBLY CHOICE OF BRUSH INFIL SLIDE BRUSH INFIL ALONG THE MINIUM EXTRUSION TRACK IN OR OUT RS0- STANDARD 0.0 in RS0-0 AGGRESSIVE 0.00 in SLIDE SHIM BETWEEN THE CARRIAGE AND THE BRUSH ALUMINIUM EXTRUSION - USE PAIRS OF SHIMS AT A TIME TO SPACE THE BRUSH AWAY THE OPTION H FRAME ALUMINIUM EXTRUSION CRIMP AS REQUIRED - EACH SHIM HEIGHT IS mm AND IN MULTIPLES CAN BE UTILISED FOR THE DESIRED EFFECT BY ADJUSTING THE HEIGHT AWAY THE OPTION H FRAME SHIM CRIMP BOTH SIDES OF TRACK TO CAPTURE INFIL IN PLACE WHEN NOT USING RIVET RIVET OPTION H FRAME CARRIAGE R0- Owners Manual

64 K0 SHAFT & COLLAR WELDED ASSY, SLICER & SPIKER HUB RS00 PLATE, ADAPTOR, OPTIONS CARRIAGE R COLLAR, LOCKING, SHAFT, SPIKER HUB Options - Spiker R R R R R R BOLT, HEX HEAD, 0SS - M x LG SPIKER HUB & LARGE PINS ASSY PIN, LARGE, SPIKER... (SUPPLIED IN ITEM ) HUB, SPIKER... (SUPPLIED IN ITEM ) NUT, HEX, NYLOC, SS, M... (SUPPLIED IN ITEM ) NUT, HEX, NYLOC, SS, M 0 *** R BEARING, UCP0, PILLOW BLOCK ASSY ITEM RS00 PIN SPIKER OPTION ASSY - PARTS LIST QTY PART NUMBER R *** R00 *** R0 *** R0 *** R0 BOLT, HEX, ZP /" UNF x." LG NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) WASHER, SPRING, ZP - /" WASHER, FLAT, ZP - /" ID x /" OD K0 SHAFT & COLLAR WELDED ASSY, SLICER & SPIKER HUB ***NOTE: ITEMS ARE SUPPLIED WITH RS00 OPTION H FRAME & ENGAGING LEVER KIT RS00 PLATE, ADAPTOR, OPTIONS CARRIAGE R COLLAR, LOCKING, SHAFT, SPIKER HUB R BOLT, HEX HEAD, 0SS - M x LG 0 R SPIKER HUB & LARGE PINS ASSY 0 R PIN, LARGE, SPIKER... (SUPPLIED IN ITEM ) 0 R HUB, SPIKER... (SUPPLIED IN ITEM ) 0 R NUT, HEX, NYLOC, SS, M... (SUPPLIED IN ITEM ) R NUT, HEX, NYLOC, SS, M 0 *** R BEARING, UCP0, PILLOW BLOCK ASSY *** R00 BOLT, HEX, ZP /" UNF x." LG *** R0 NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) *** R0 *** R0 WASHER, SPRING, ZP - /" WASHER, FLAT, ZP - /" ID x /" OD C R ITEM 0 RS00 PIN SPIKER OPTION ASSY - PARTS LIST QTY PART NUMBER K0 SHAFT & COLLAR WELDED ASSY, SLICER & SPIKER HUB RS00 PLATE, ADAPTOR, OPTIONS CARRIAGE R R 0 R 0 R 0 R 0 R R *** R *** R00 *** R0 *** R0 *** R0 COLLAR, LOCKING, SHAFT, SPIKER HUB BOLT, HEX HEAD, 0SS - M x LG SPIKER HUB & LARGE PINS ASSY PIN, LARGE, SPIKER... (SUPPLIED IN ITEM ) HUB, SPIKER... (SUPPLIED IN ITEM ) NUT, HEX, NYLOC, SS, M... (SUPPLIED IN ITEM ) NUT, HEX, NYLOC, SS, M BEARING, UCP0, PILLOW BLOCK ASSY BOLT, HEX, ZP /" UNF x." LG OPTIONS CARRIAGE, BEARING AND MTG HARDWARE NUT, HEX, NYLOC, P-TYPE, ZP - /"UNF (FULL) ON BOTH ENDS OF THE OPTION ARE SUPPLIED WASHER, SPRING, WITH THE ZP RS00 - /" OPTION H FRAME & LEVER KIT WASHER, (PARTS FLAT, SHOWN ZP HERE - /" FOR ID ASSEMBLY x /" REFERENCE OD ONLY) 0 PINS ARE REPLACEABLE B ***NOTE: ITEMS ARE SUPPLIED WITH RS00 OPTION H FRAME & ENGAGING LEVER KIT DETAIL - B DETAIL - C RS00 - Sheet of R0- Owners Manual

65 OPTIONS CARRIAGE, BEARING AND MTG HARDWARE ON BOTH ENDS OF THE OPTION ARE SUPPLIED WITH THE RS00 OPTION H FRAME & LEVER KIT Options - Spiker (PARTS SHOWN HERE FOR ASSEMBLY REFERENCE ONLY) DETAIL - A HEAVY DUTY SPRINGS R ( OFF) ARE REQUIRED FOR THE OPTIMAL OPERATION OF THE PIN SPIKER. A LOCKING PINS MUST BE USED TO ENSURE THE PIN SPIKER ASSY ON SIDE VIEW THE OPTIONS H FRAME ASSY. OPTIONS CARRIAGE, BEARING AND MTG HARDWARE ON BOTH ENDS OF THE OPTION ARE SUPPLIED WITH THE RS00 OPTION H FRAME & LEVER KIT (PARTS SHOWN HERE FOR ASSEMBLY REFERENCE ONLY) DETAIL - A BOTTOM VIEW OPTIONS CARRIAGE, BEARING AND MTG HARDWARE ON BOTH ENDS OF THE OPTION ARE SUPPLIED WITH THE RS00 OPTION H FRAME & LEVER KIT (PARTS SHOWN HERE FOR ASSEMBLY REFERENCE ONLY) RS00 - Sheet of A R0- Owners Manual SIDE VIEW

66 ( Ref.) R HCS, CAP SCREW, HEX, SS, M-. x LG (Supplied with Item ) ( Ref.) R HCS, CAP SCREW, HEX, SS, M-. x LG (Supplied with Item ) Options - L.E.D Lights ( Ref.) ( Ref.) ( Ref.) ( Ref.) R R E0 R0 NUT, HEX, SS - M (Supplied with Item ) WASHER, SPRING, SS, Mx. x.od (Supplied with Item ) SWITCH, LIGHT (Supplied Fitted with Standard Machine; not included in L.E.D. Light Option) WASHER, FLAT, ZP - /" x " OD (Supplied Loose with Standard Machine; not included in L.E.D. Light Option) ( Ref.) RS BRACKET, LIGHT, MTG, PLASTIC COVER (Supplied Loose with Standard Machine; not included in L.E.D. Light Option) RS0 R0 LED LIGHT OPTION ARRANGEMENT PARTS LIST ITEM QTY PART NUMBER R LIGHT, OVAL LED, MTG BRKT & FASTENERS ASSY E0 HARNESS LOOM FOR LED LIGHT KIT Supplied Fitted with Standard Machine, ( Ref.) R HCS, CAP SCREW, HEX, SS, M-. x LG (Supplied with Item ) (not included in L.E.D. Light Option) ( Ref.) ( Ref.) ( Ref.) ( Ref.) R R R E0 HCS, CAP SCREW, HEX, SS, M-. x LG (Supplied with Item ) NUT, HEX, SS - M (Supplied with Item ) WASHER, SPRING, SS, Mx. x.od (Supplied with Item ) SWITCH, LIGHT (Supplied Fitted with Standard Machine; not included in L.E.D. Light Option) (Supplied with Item ) ( Ref.) R0 WASHER, FLAT, ZP - /" x " OD ( Ref.) RS (Supplied Loose with Standard Machine; not included in L.E.D. Light Option) BRACKET, LIGHT, MTG, PLASTIC COVER (Supplied Loose with Standard Machine; not included in L.E.D. Light Option) (Supplied with Item ) VIEW C UNDERNEATH A DETAIL B SWITCH MOUNTED ON ENGINE CONTROL PANEL Supplied Loose with Standard Machine, (not included in L.E.D. Light Option) refer to Instruction Sheet supplied. DETAIL A TYPICAL TO BOTH LED LIGHTS ON BOTH SIDES E REAR Long mounting Arm VIEW C NOTE: Item Bracket must be fitted with the Long mounting Arm facing the Rear, so Light is facing directly side ways Kit Wiring Loom is intergrated in Main Loom, RS0, and B is supplied fitted with the Standard Machine Assembly. R0- Owners Manual

67 RS DRAWBAR TOWBALL TOWING COUPLING OPTION ASSY - PARTS LIST RS0 DRAWBAR, TOWBALL, WELDED, ASSY Options - Towball Drawbar & Coupling RS0 CAP, SHS Assembly END, PLASTIC, BLACK -." SQ. E PIN, LOCK, TOWBALL COUPLING E SPRING, LOCKING PIN - JOCKEY WHEEL LEG E PIN, ROLL/SPRING - /" Dia. x /" LG E0 TOWBALL HITCH HANDLE 0MM-inch E PIN, PIVOT, TOWBALL COUPLING E CLIP, R, TOW COUPLING RS DRAWBAR TOWBALL TOWING COUPLING OPTION ASSY - PARTS LIST RS0 DRAWBAR, TOWBALL, WELDED, ASSY RS0 CAP, SHS END, PLASTIC, BLACK -." SQ. E PIN, LOCK, TOWBALL COUPLING E SPRING, LOCKING PIN - JOCKEY WHEEL LEG E PIN, ROLL/SPRING - /" Dia. x /" LG E0 TOWBALL HITCH HANDLE 0MM-inch E PIN, PIVOT, TOWBALL COUPLING E CLIP, R, TOW COUPLING (BOTH ENDS) DETAIL A A R0- Owners Manual

68 Options - Jockey Post RS0 JOCKEY POST OPTION R0 COMPLETE EXPLODED - PARTS LIST RS LEG, JOCKEY POST, WELDED, ASSY RS0 CAP, SHS END, PLASTIC, BLACK -." SQ. E PULL PIN ASSY, FOR JOCKEY WHEEL, USA BUILD R0 BOLT, HEX, ZP - /" UNF x." LG R NUT, HEX, JAMB, ZP - /" UNF R0 WASHER, FLAT, ZP - /" RS0 JOCKEY POST OPTION R0 COMPLETE EXPLODED - PARTS LIST ITEM QTY PART NUMBER RS LEG, JOCKEY POST, WELDED, ASSY RS0 E CAP, SHS END, PLASTIC, BLACK -." SQ. PULL PIN ASSY, FOR JOCKEY WHEEL, USA BUILD LOCK NUT TO BE TIGHTENED AFTER THE JOCKEY WHEEL LEG R0 R BOLT, HEX, ZP - /" UNF x." LG NUT, HEX, JAMB, ZP - /" UNF IS IN THE CORRECT OPERATIONAL LOCATION R0 WASHER, FLAT, ZP - /" DRAWBAR WELDED ASS'Y SCREW THE BOLT THROUGH THE JOCKEY WHEEL LEG THEN INTO THE NUT BEHIND THE DRAWBAR CONTACT PLATE (ADJUST TO ALLOW FREE LEG ROTATION) R0- Owners Manual

69 Harness Loom R0- Owners Manual

70 Schematic Wiring Diagram R0- Owners Manual