INTRODUCTION. S35-T Kit Features :

Transcription

1

2 INTRODUCTION The S35-T is a brand new SWORKz 1/8 nitro Truggy based on the SWORKz S35-3 nitro Buggy. The Evolution of the S35-T project is the result of SWORKz passion for racing and race development. Combining every detail into a more balanced and improved truggy called the "S35-T". The SWORKz S35-T Pro Truggy Kit comes standard with many SWORKz Factory Team Option Parts which provide strength and performance. The S35-T newly designed front Ackerman steering system and unique front shock tower design allow you to change the front upper angle position easily. The centre plastic BBD differential system provides better acceleration for the S35-T. A new simpler radio tray system gives better and more precise throttle and braking response. Based on the S35-3 lightened transmission gear box system with a truggy crown gear ratio, provides powerful punch as needed in truggy racing. A longer T-7075 aluminum chassis comes with several new designs. The L.F.C (Lower Friction Coefficient) chassis allows users to install 15-75g balance weights on the chassis CG position. The S35-T includes high quality parts, a refined shock system, more options and an optimized suspension geometry. Arms are made from a strong standard nylon material. SWORKz utilizes only the highest quality materials and industry leading manufacturing processes, resulting in a faster, stronger and more reliable vehicle. The SWORKz S35-T Pro Truggy Kit from SWORKz has been designed to out-perform the competition on any Off-Road terrain, while offering amazing performance to drivers of all levels. S35-T Kit Features : 1. S35-T series Nitro Truggy T-7075 Aluminum Lightened Main Chassis with L.F.C system (Lower Friction Coefficient) 2. S35 Series Front and Rear Pro Shock Towers made of Lightened T-7075 Aluminum for longer BBS shocks system. 3. S35 Series BBS Emulsion Shock Caps. 4. S35-3 Lightened Transmission Gear Box System with High Performance Crown Gears and Pinion Gears. 5. Front and Rear Universal Drive Shafts 6. S35-3 Series Aluminum Rear Lower Fully Adjustable Toe-In Block (A). 7. S35-3 Series Competition Aluminum Steering Knuckle Plates. 8. S35 Series P-BBD (Plastic Big Bore Diff.) Competition Large Centre Differential System. 9. Double Protection Bumper Design. 10. Heavy Duty Front and Rear Arms 11. Professional 2.0 Metal Brake Calipers. 12. New 150cc Floating Fuel Filter System Tank. Specification Length: 585 Width: Adjustable Front Upper and Lower Suspension Arm System. Height: Speed Rhinoceros 3.0 Body Shell included. Ground Clearance: 75 Wheelbase: Track: F:355 / R:355 Gear Ratio: C:48/13T, F/R 46/10T Weight: 3980g 2

3 WARRANTY Your SWORKz S35-T kit warranty covers workmanship and manufacturing defects of the original and unmodified parts. Warranty claims resulting from crashes, abuse, improper operation, improper mounting, improper adjustment or lack of maintenance will not be honored. Contact your local hobby shop or SWORKz distributor for all claims and questions. Claims must be well documented. All Claims are subject to expert examination approval by SWORKz. 3

4 INDEX INSTRUCTION 2 Warranty 3 INDEX 4 Required Equipment for Operation 5 Operation Guide 6 Assembly Steps 7-38 Blank Set-up Sheet S35-T Key No. List S35-T Spare Part List S35-T Option Part List 43 End cover 44 This radio controlled racing car is not a toy! This high-performance R/C model is recoended for ages 14 and older. 4

5 Required Equipment for Operation Radio Gear Stick Type Receiver batteries Nitro fuel We recoend that you use fuel containg 20~25% nitro. Throttle servo On/Off Switch Receiver Wheel & Trigger Type Steering servo Fuel bottle Engine Recoended Engine Starting Equipment 6 Exhaust header ST-3 Turbo Plug ST-4 Turbo Plug SP EFRA2111 Glow Starter box Tools Recoended Long nose pliers Side cutter 1.5 Curved scissors Paint Modeling knife Screwdriver Instant cement Thread lock Double-sided tape Screwdriver Included items Glow plug wrench Hex wrench Grease 2.5 5

6 Operation Guide Assemble front and rear Assemble in the specified order Assemble both left and right sides Assemble for 2 sets Assemble for 4 sets overturn Thread Locking Compound Grease Pure Silicone Oil Air filter oil Safety Precautions The SWORKz S35-T is a high performance radio control model which needs to be operated with caution and coon sense. The S35-T Pro Kit is not intended for children under the age of 14 without adult supervision. SWORKz shall not be held liable for any loss or damages, whether direct, indirect, act of nature, arising from the abuse or misuse of this product or any other product required while operating this model. - The nitro fuel can be dangerous is improperly handled. - Always keep your nitro fuel in a cool area and never use near flame, sparks, or while smoking. - Keep your nitro fuel, and all other flaables, out of the reach of children. - Always run your model in a well ventilated area outdoors. Never run your model indoors. - After running your car, all parts of the engine and exhaust can become extremely hot. Be careful not to touch these parts especially when refueling, or making repairs. - This model is controlled by your radio controller and is sometimes vulnerable to interference from many outside sources. This interference can cause a loss of control so it is necessary to operate this model in an open area to avoid personal, or property damage. Always ensure turning on your radio first. - Keep all the parts included in the package out of reach of children. - This model contains many fast rotating parts. Never touch them during operation. - Follow the instructions included with your radio gear. - Never operate your model near people or property. The speed of this model has the potential to injure and or damage people and or property. - Always use original SWORKz spare parts and option parts. - Always ensure that the buggy is in proper working condition before use. 6

7 BAG B Pin M2.2x9.9 x O-ring S5 4.8X1.5 x A A A Ball Bearing 8x16x5 x A M3x10 FH/ST HEX Screw x Remember to apply a light coat of grease to the o-ring, then slide it over the shaft of the out drive and seat it in the diff case. Insert the pin through the hole in the diff case and through the hole in the shaft of the out drive Bevel Gear Shaft x Washer 3.5X10X0.2 x OK! NG! Fill the differentials with oil up to 80% above the satellite gears. Put the SWORKz Diff. Oil 7000cps for the front Diff. and 3000cps for the rear Diff. 7

8 BAG C Pin M2.2x9.9 x O-ring S5 4.8X1.5 x Ball Bearing 8x16x5 x Remember to apply a very light coat of grease to the o-ring, then slide it over the shaft of the out drive and seat it in the diff case. Insert the pin through the hole in the diff case and through the hole in the shaft of the out drive M3x12 FH/ST HEX Screw x Bevel Gear Shaft x Washer 3.5X10X0.2 x OK! NG! Fill the differentials with oil up to 80% above the satellite gears. Put the SWORKz Diff. Oil 7000cps for the center Diff. 8

9 BAG D M5x4 Set Screw (Flat Bottom) x Pro Tip: Before installing the M5x4 set screw (104010), remember to clean the set screw and center driver joint (330661A) first. Then apply TLC on the set screw M3x12 FH/ST HEX Screw x Ball Bearing 5x11x4 x (#14 #15) (#3) A SHIM 13x16x0.2 x (#14 #15) A Note: The aluminum front lower arm holder (330215A) can offer 0 or 1 kick-up for your front lower suspension. You may use the inserts to get 0 kick-up or to get 1 for your front lower suspension Front Lower Aluminum Arm Holder Inserts (0 degree) Front Lower Aluminum Arm Holder Inserts (1 degree) (#2) Note: SHIM 13x16x0.2 Please use 13x16x0.2 shims to adjust the play between the crown gear and pinion gear. Standard suggestion is 1pc shim on the diff crown gear side and 2pcs on the other side. 9

10 M5x4 Set Screw (Flat Bottom) x Pro Tip: Before installing the M5x4 set screw (104010), remember to clean the set screw and center driver joint (330661A) first. Then apply TLC on the set screw M3x12 FH/ST HEX Screw x Ball Bearing 5x11x4 x (#3) A SHIM 13x16x0.2 x (#2) BAG E1 Note: SHIM 13x16x0.2 Please use 13x16x0.2 shims to adjust the play between the crown gear and pinion gear. Standard suggestion is 1pc shim on the diff crown gear side and 2pcs on the other side M3x15 Hex Socket OH/TP Screw x B C (#6) M2.6x6 FH/ST HEX Screw x A M4x10 Hex Socket OH/TP Screw X B Left A 10

11 Front/Rear Lower Arm HingPin x M3x35 FH/ST HEX Screw x (#3) A 3 Countersunk x2 Washers (GM) (#24 #25) (#3) A (#24 #25) Use a 2 Hex Wrench and slowly tighten the Hinge Pins (#1) Pop in the Stabilizer Guide M3x3 Set Screw x A 11

12 M3x4 Set Screw x M2.5x8H ex Socket OH/TPScrew x M3x10 FH/ST HEX Screw x Note: The aluminum front upper arm holder (330772) can offer either 0 or + -1 kick-up for your front upper arm suspension. You may use the inserts to get 0 kick-up or to get +-1 for your front upper suspension S35-3 Aluminum Front Upper Arm Holder Insert (+/- 1.0 Degree) S35-3 Aluminum Front Upper Arm Holder Insert (0 Degree) M3x8 FH/ST HEX Screw x

13 BAG E M3x12 FH/ST HEX Screw x (#1,2,3,4) B Pro Tip: The S35-3 Front Upper Arm Adjust Inserts can give different steering adjustments (Ackerman). Put all inserts behind the front upper arms, you will get faster steering response. Otherwise put all inserts in front of the upper arms, you will get more stable steering response. Try to use or to adjust the front upper arm position (#11 #18) M3x5 Hex Socket OH/TP Screw x Front Upper Arm HingPin x (#11 #18) (#9 #10) (#1,2,3,4) B (#9 #10) Note: S35-3 Front Shock Tower Upper Arm Holder Insert (+/- 1.0 Degree) S35-3 Front Shock Tower Upper Arm Holder Insert (0 Degree) Note: S35-3 Front Upper Arm Adjust Insert (0.9) S35-3 Front Upper Arm Adjust Insert (1.0) S35-3 Front Upper Arm Adjust Insert (1.1) S35-3 Front Upper Arm Adjust Insert (2.0) A M4x10 Hex Socket OH/TP Screw X C (#6) B M3x15 Hex Socket OH/TP Screw x M2.6x6 FH/ST HEX Screw x B A 13

14 M3x12 FH/ST HEX Screw x A (#2) M3x14 FH/ST HEX Screw x B M3x10 Hex Socket OH/TP Screw x (#16 #17) (#1) Pro Tip: The Aluminum Rear Lower Fully Adjustable Toe-In Block (A) can use 3 types of square inserts to get 1.0/2.0/3.0 3 different toe in angles. Also plus 3 different rear lower arm kick up degrees. For the option parts SW S35-3 Aluminum Rear Lower Fully Adjustable Toe- In Block (B), you will have 0.5 degree more than Type A, so 1.5/2.5/3.5 can be set (#16 #17) (#1) (#21 #22 #23) (#21 #22 #23) M3x35 FH/ST HEX Screw x Front/Rear Lower Arm HingPin x2 Note: S35-3 Aluminum Rear Lower Fully Adjustable Toe-In Block (A) Insert (+- 1 degree) S35-3 Aluminum Rear Lower Fully Adjustable Toe-In Block (A) Insert (0 degree) S35-3 Aluminum Rear Lower Fully Adjustable Toe-In Block (A) Insert (+- 1 Kick up degree) 14

15 M3x3 Set Screw x (#1) Pop in the Stabilizer Guide A M3x4 Set Screw x M2.5x8H ex Socket OH/TPScrew x

16 BAG E M3 Nut Lock x M3x8xT0.8 x Flange Ball Bearing 3x6x2.5 x A Ball Bearing 6x10x3 x A (#11) M3x12 Hex Socket x2 OH/TP Screw(HT) A (#10) A M3x10 FH/ST HEX Screw x Ball Bearing 6x10x3 x SHIM 6.0x10.0x0.2 x Please use the 6x10x0.2 shim to adjust play between the servo saver post and steering bell crank plate

17 BAG E A M3x10 Hex Socket OH/TP Screw x4 Right (#8) A Left A A (#8) Screw and adjust A Knuckle Pivot Ball Nut so as the pivot ball can be moved smoothly. 21 Left M5x4 Set Screw (Flat Bottom) x A Pin M3.0x16.8 x2 Be sure that M5x4 set screw must touch the flat side from pin A Ball Bearing 8x16x5 x SHIM 13x16x0.2 x Right Note: SHIM 13x16x0.2 Please use 13x16x0.2 shims to adjust the gap between the wheel hub and wheel knuckles. Standard suggestion is 1pc shim on the outside between 8x16x5 ball bearing and knuckle. If the wheel hub still has big play with knuckle, please try to put another shim in another side between ball bearing and knuckle.

18 (#2) M3x10 Hex Socket OH/TP Screw x A M5x4 Set Screw (Flat Bottom) x Be sure that M5x4 set screw must touch the flat side from pin A Pin M3.0x16.8 x2 Right A Ball Bearing 8x16x5 x A Left SHIM 13x16x0.2 x Note: SHIM 13x16x0.2 Please use 13x16x0.2 shims to adjust the gap between the wheel hub and wheel knuckles. Standard suggestion is 1pc shim on the outside between 8x16x5 ball bearing and knuckle

19 (#7) (#6 #7) (#7) M3 Nut Lock x Rear Hub Carriers Hing Pin with Nut x (#6 #7) C (#4) S350T Rear Upper Arm Turnbuckle M5x72 x C (#9)

20 M3 Nut Lock x M3x12 Cap Screw x M3x16 Hex Socket OH/TP Screw x M3 Nut Lock x M3x12 Hex Soket OH/TP Screw x4 20

21 M3x20 Hex Soket OH/TP Screw x M3x15 Hex Soket OH/TP Screw x BAG F M3x12 Hex Socket OH/TP Screw(HT) x M3x3 Set Screw x M3x8 FH/ST HEX Screw x

22 M3x25 Hex Socket OH/TP Screw x BAG F M3x6 Hex Socket OH/TP Screw x

23 M3x10 FH/ST HEX Screw x M4x10 FH/ST HEX Screw x M4x16 FH/ST HEX Screw x M3x10 FH/ST HEX Screw x A M4x12 FH/ST HEX Screw x

24 M4x12 FH/ST HEX Screw x M4x16 FH/ST HEX Screw x M3x20 Hex Socket OH/TP Screw x (#1) M3 Nut Lock x Flage Nylon Nut M4 x

25 BAG G Steering Linkage Turnbuckle M4x75 x C (#2) C (#3) M3x10 Hex Socket OH/TP Screw x

26 M3x12 Hex Soket OH/TP Screw x M3x15 Hex Soket OH/TP Screw x4 Servos are not included in the kit (#4) (#3) (#3) M3 Nut Lock x2 Receiver and switch are not included in the kit. The switch is not included in the kit M3x10 Hex Socket OH/TP Screw x3 Laps transponder is not included in the kit

27 M3x8 FH/ST HEX Screw x M3x3 Set Screw x M3x8 Hex Socket OH/TP Screw x2 Battery is not included in the kit. or Li-ion Size: Li-ion Size:

28 M3x8 FH/ST HEX Screw x M3x12 Hex Socket x1 OH/TP Screw(HT) M3 Nut Lock x Steering Servo Turnbuckle (M3x30) x C (#7) C (#7)

29 BAG M M3x10 Hex Socket OH/TP Screw x SW A S350 PSP System Aluminum Settring Bellcrank Upper (A 2H ) Assembly Note M3x8 FH/ST HEX Screw x1 Position A M3 Nut Lock x1 Position B If servo saver arms are not included use this: Position A: Standard steering response location. Use of a 2.5 longer servo saver arm is required If servo saver arms are included use this: Position A: Standard steering response location. Use of the included 2.5 longer servo saver arm is required. Position B: Quick steering response location. Standard servo saver arm can be used. BAG G M3x8 FH/ST HEX Screw x When the volume of fuel tank system is over 125cc, using the part can be reduced 2cc for your fuel tank (#6) (#2) M2.5x5 Hex Socket OH/TP Screw x (#5) M3x10 Hex Socket OH/TP Screw x C C C 29

30 M3x10 FH/ST HEX Screw x BAG I M3x12 Cap Screw x Spring Washer x A A A 30

31 x1 M3x8 Cap Screw A x1 M3x6xT x5 M5x8xT x2 Ball Bearing 5x10x A A A x4 M4x8 I-Head Screw A x2 M4x4 Set Screw (Flat Bottom) x1 M4x8 FH/ST HEX Screw Pipeset is not included in the kit.

32 BAG J (#2) M3x3 Set Screw x M2.6x6 Cap Screw x C A M3x12 Hex Socket OH/TP Screw(HT) x A A Throttle Rod 50 x A A Brake Rod 60 x A (#19) A Brake Adjuster Knob x M2.5x5 Hex Socket OH/TP Screw x M3x8 FH/ST HEX Screw x A (#12) A Adjuster Knob x Brake Spring x Throttle Rod Spring x M3 Nut Lock x1 52 Neutral Full Throttle Brake Linkage Adjustment Idle adjustment screw Turn on the transmitter and receiver. Set the throttle servo trim in neutral. Adjust the idle adjustment screw to make the carburettor opening no more than 1. Adjust the position of servo horn. Check that it operates smoothly without making the operation of the other parts difficult. Make sure the brake does not work in this setting. Adjust the servo horn to fully open the carburettor. Change the position of servo horn if the carburettor is not fully open or opens too much. If your transmitter has a function to adjust throttle end points, make an adjustment this way. Adjust the position of servo horn to make the brakes function. Make sure the brakes do not work when the servo trim is in neutral. 32

33 BAG J (L) S350 New BBS System +5.5 Shock Shaft ( L) x (S) S350 New BBS System +1.3 x2 Shock Shaft ( S) Front (S) Rear (L) Front (S) Rear (L) (F) (R) M2.5 Nut Lock x Shock Seal Washer 3.5X7X1.0 x C (#8) Shock Seal Washer 3.6X7X2.5 x M2.6x6xT0.6 x Shock Seal O-Ring x Front (S) Rear (L) Shock Seal O-Ring x4 36~ ~ Shock Spring Adjust x4 Nut O-Ring C (#10) Slowly push the shock shaft to the end of shock cap. Then tight screw M2x (L) S350 BBS Option Shock x2 SpringB-1(90X1.4X7.5) C (#5) (S) S350 BBS Option Shock x2 SpringA-1(75X1.4X6.5) Front (S) Rear (L) 33

34 BAG J B A M3x25 Cap Screw x B A A A A A A A A Flange M3 Nut Lock x M3x15 Hex Socket OH/TP Screw x A A

35 58 Using air filter oil (Not included) x1 M3x8 FH/ST HEX Screw x1 M3x10 Hex Socket OH/TP Screw x1 Flange M3 Nut Lock A

36 BAG E M3x12 Cap Screw x2 SW BK A Wheel Nut x4 Tires and wheels are not included in the kit A A 36

37 62 Use body scissors to cut along the body lines A 63 Use water/washing solution to clean body M Apply window masks as shown. Paint body. 37

38

39 SET-UP SHEET Race time / Lap: Best lap: Name: Date: Track: Tire Front Type: Foam: Front Suspension Diff. Oil Front: Center: Rear: Rear Type: Foam: Front Toe-In Al(6g) Brass(25g) Track Conditions Size: Traction: Surface: Engine Left = Right Type: Gasket: Plug: Clutch Clutch shoes: Spring: Open High Smooth Clutch bell / Spur gear: Front Roll Center Muffler: Fuel: Track width Med. Med. Med. Camber angle Upper Lower Left = Right Tight Low Bumpy Toe angle F R 2 Rebound stop RearSuspension Camber angle Rebound stop F: R: Al(7g) Brass(25g) Al(11g) Brass(25g) Brass(35g) Rear Toe-In Front Shocks Camber Angle Oil: Pistons: Spring: L: R: Spacer: Notes: Steening Ackerman 1 Type A K-Up K-Up K-Up K-Up Type B Upper arm position Camber angle RearShocks Oil: Pistons: Spring: Spacer: F R F: R: Sway bar Body: Wing: Wing Position Use None Front Wheelbase F adjustment R Sway bar F Use None Notes: R

40 SET-UP SHEET Race time / Lap: Best lap: Name: Date: Track: Tire Front Type: Foam: Front Suspension Diff. Oil Front: Center: Rear: Rear Type: Foam: Front Toe-In Al(6g) Brass(25g) Track Conditions Size: Traction: Surface: Engine Left = Right Type: Gasket: Plug: Clutch Clutch shoes: Spring: Open High Smooth Clutch bell / Spur gear: Front Roll Center Muffler: Fuel: Track width Med. Med. Med. Camber angle Upper Lower Left = Right Tight Low Bumpy Toe angle F R 2 Rebound stop RearSuspension Camber angle Rebound stop F: R: Al(7g) Brass(25g) Al(11g) Brass(25g) Brass(35g) Rear Toe-In Front Shocks Camber Angle Oil: Pistons: Spring: L: R: Spacer: Notes: Steening Ackerman 1 Type A K-Up K-Up K-Up K-Up Type B Upper arm position Camber angle RearShocks Oil: Pistons: Spring: Spacer: F R F: R: Sway bar Body: Wing: Wing Position Use None Front Wheelbase F adjustment R Sway bar F Use None Notes: R

41 Parts No. List Part No. Part Name Q`ty in Use ltem No. Part No. Part Name Q`ty in Use ltem No A Diff Case with Matel part 2 SW A S350T Fuel Tank Set (150cc) 1 SW S35-3 Series Pleastic Center Big Bore Diff Case 1 SW A S350 Rear Hub Carrier Set (Also for LDS) (L) 1 SW A S350 Rear Hub Carrier Set (Also for LDS) (R) Front Bumper 1 SW Wing Stay (L) 1 Wing Stay (R) 1 Wing Stay Holder 1 Wing Support (L) 1 Wing Support (R) 1 Rear Body Mount 1 Front Body Mount A S35-3 Front Steering Knuckle Set L 1 SW A S35-3 Front Steering Knuckle Set R S35-3 Series Gear Box Set (F) 2 SW S35-3 Series Gear Box Set (R) 2 S-Way Bar Holder BK SWORKz 1/8 Off Road Speed Wing (BK) 1 SW BK Wing Holder C Rear Upper Arm Ball End (For Wheel Side) 2 SW C Rear Upper Arm Ball End 2 Steering Ball End 2 Steering Ball End (For Wheel Side) 2 Shock Cap Insert 4 Shock Ball End 4 Shock Spring Holder 4 Sway Bar Linkage 4 Steering Linkage Ball End 2 Throttle Linkage Ball End A Settring Bellcrank Upper ( R ) 1 SW A Settring Bellcrank ( R ) 1 Settring Bellcrank ( L ) 1 Rear Chassis Brace Mount 1 Steering Servo Horn (For Futaba) 1 Steering Servo Horn (For S&K) 1 Steering Servo Horn (For Hitec) 1 Servo Mount 2 Throttle Servo Horn (For Futaba) 1 Throttle Servo Horn (For S&K) 1 Throttle Servo Horn (For Hitec) 1 Brake Servo Horn Side Guard ( R ) 1 SW Side Guard ( L ) Center Diff. Mount (Lower) 2 SW Center Diff. Mount (Upper) C Fuel Tank Post 2 SW C Fuel Tube Holder A Ail Filter Base 1 SW A Ail Filter End Cap S350 BX1/BR1Rear Chassis Brace 1 SW S350 BX1/BR1 Front Chassis Brace S35-3 Series One Unit Radio Tray 1 SW S35-3 Series One Unit Radio Tray Battery Cover 1 S35-3 Series One Unit Radio Tray Receiver Cover 1 S35-3 Series One Unit Radio Servo Mount S35-3 Series Lower Arm Holder Square Inserts (+1/+1 degree) 2 SW S35-3 Series Lower Arm Holder Square Inserts (0/+1 degree) 2 S35-3 Series Lower Arm Holder Square Inserts (0 degree) 2 S35-3 Series Front Lower Suspension Plate Inserts (1 degree) 2 S35-3 Series Front Lower Suspension Plate Inserts (0 degree) 2 S35-3 Series Front Rear Lower Arm Holder Inserts (1 degree) 2 S35-3 Series Front Rear Lower Arm Holder Inserts (0 degree) 2 S35-3 Series Rear Front Lower Suspension Plate Inserts (+/-1 degree) 2 S35-3 Series Rear Front Lower Suspension Plate Inserts (0 degree) 2 S35-3 Series Front Upper Arm Holder Inserts (+/-1 degree) 2 S35-3 Series Front Upper Arm Holder Inserts (0 degree) 2 S35-3 Series Front Shock Tower Arm Inserts (+/- 1degree) 2 S35-3 Series Front Shock Tower Arm Inserts (0 degree) 2 S35-3 Series Adjust Clip Inserts (2) 4 S35-3 Series Adjust Clip Inserts (1.1) 2 S35-3 Series Adjust Clip Inserts (1) 2 S35-3 Series Adjust Clip Inserts (0.9) 2 S35-3 Series Adjust Clip Inserts for Rear Wheel Hub (3) 2 S35-3 Series Adjust Clip Inserts for Rear Wheel Hub (2) 4 S35-3 Series Adjust Clip Inserts for Rear Wheel Hub (1) 8 S35-3 Series Ball Bearing Inserts for 8x16x5 4 S35-3 Series Ball Bearing Inserts for 6x12x4 4 S35-3 Series Ball Bearing Inserts for 8x14x4 4 Pivot Ball Cup 4 Brake Linkage Holder 2 Throttle Linkage Holder 1 Throttle Linkage Holder (Done) 1 Throttle Linkage Holder (Up) B S35-T/S350T Race-composite Front Lower Arm +3 Set 1 SW B B S35-T/S350T Race-composite Rear Lower Arm +3 Set 1 SW B B S35-T/S350T Race-composite Front Upper Arm +3 Set 1 SW B S350T Rear Chassis Brace 1 SW S350T Raer Body Mount 1 SW S350T Front Body Mount 2 41 S350T Fuel Sprinkle Guard 1 S350 Fuel Tank Ring-pull 1 S350 Fuel Tank Ring-pull Holder Antenna Tube 1 SW S350T Series Universal Cross Drive Shaft Set SW A S35-T/ZEUS Speed Rhinocero III Body Shell (1.5) 1 SW A Diff. Bevel Gear 18T 6 SW Diff. Bevel Gear 10T 12 SW Tornado Clutch Shoes 3 SW A SWORKz Tornado Fly Wheel Set (GM) 1 SW A Tornado Fly Wheel Center Nut 1 SW A Fly Wheel Collect 1 SW A Bevel Gear Shaft 6 SW A S35 Series Front/Rear Diff. Outdrive (2pc) 2 SW A Pin M2.2x9.9 6 SW Center Diff. Outdrive 2 SW A S350 Engine Mount (L) (HC) 1 SW A A S350 Engine Mount (R) (HC) 1 SW A Front/Rear Lower Arm HingPin 4 SW Brake Cam (S) 1 SW Brake Cam (L) 1 SW Brake Cam 1 SW A S350 Sseries Servo Saver Post (HC) 1 SW A A S350 Series Knuckle Pivot Ball Washer(GM) 2 SW A A S350 Series Knuckle Pivot Ball Nut(GM) 4 SW A Servo Saver Shaft 2 SW Front Upper Arm HingPin 2 SW A S350 Wheel Nut (HC) 4 SW A A Pin M3.0x16.8 (With Flat Holder) 4 SW A Rear Upper Sus. Arm Ball Stud 4 SW Shock Ball Stud 12 SW Sway Bar Ball Stud 4 SW Clutch Bell 13T 1 SW A S350 EVO Shock Cap Stud 4 SW A A Pipe Holder(GM) 1 SW A Steering Servo Turnbuckle (M3x30) 2 SW A Adjuster Knob(GM) 4 SW A A Brake Adjuster Knob(GM) 2 SW A A S35 Sries Aluminum Front Changeable Lower Arm Holder (BK) 1 SW A S350 BX1/BR1 Steering Knuckle Pivot Ball Turnbuckle 4 SW B S35-3 Series Aluminum Rear Chassis Brace Mount (GM) 1 SW B A S350 PSP System Aluminum Series Settring Bellcrank Upper (A 2H ) 1 SW A S350 Professional Matel Brake Calipers 2.0 A Side 2 SW S350 Professional Matel Brake Calipers 2.0 B Side 2 SW S350T Rear Upper Arm Turnbuckle M5x72 2 SW S350T Steering Linkage Turnbuckle M4x75 2 SW A S35-T Truggy Crown Gear 46T (Fit for SW /330501A) 2 SW A S350T 17 Wheel Hub (L11.5) 4 SW S350 New BBS System Shock Seal Cap (GM) 4 SW S350 New BBS System Shock Spring Adjust Nut 4 SW S350 New BBS System Shock Seal Washer 3.6X7X2.5 8 SW S350 New BBS System Shock Piston 1.3X6 Holes 2 SW S350 New BBS System Shock Piston 1.4X6 Holes 2 SW S350 New BBS System Shock Seal Washer 3.5X7X1.0 4 SW S350 Competition Series Professional Brake Disc 2 SWC S350 BBS System +5.6 Shock Body L (HD) 2 SW S350 BBS System +5 Shock Body S (HD) 2 SW S350 New BBS System +5.5 Shock Shaft (L) 2 SW S350 New BBS System +1.3 Shock Shaft (S) 2 SW S35 Series Adjust Front Lower Arm Plate 1 SW S35-3 Seies BBS Emulsion Shock Cap 4 SW S350 BBD Special Brake Cam 1 SWC S35-T Pinion Gear 10T (Only Fit for SW A) 2 SW A S35-T/S35 Series Competition Center Drive Join (5 set screw) 2 SW A A S35-T T7075 Aluminum Rear Shock Tower 1 SW A S35-T T7075 Lightened Main Chassis 1 SW A S35-3 Series Steel F-Center Dive Shaft (88) 1 SW A S35-3 Series Center Spur Gear for Big Bore Diff Case (48T) 1 SW S35-3 Series Rear Front Lower Suspension Plate 1 SW S35-3 T-7075 Aluminum Rear Lower Fully Adjustable Toe-In Block (Type A) 1 SW S35-3 Series T-7075 Aluminum Front Upper Arm Holder 1 SW S35-3 Series T-7075 Aluminum Steering Plate 1 SW S35-3 Series Servo Saver Big Nut 1 SW S35-3 Series Aluminum Steering Linkage 7 Ball Stud(4pc) 4 SW S35-3 Series Rear Hub Carriers Hinge Pin 2 SW S35-T T7075 Aluminum Front Shock Tower 1 SW S35-T Steel Center Rear Drive Shaft SW S35-3 Series T-7075 Aluminum Steering Knuckle Plate (F-Type) (R&L) 2 SW S35-3 Pro-composite Carbon Steering Bellcrank Plate (Suit for Nitro Buggy) 1 SW Fuel Tube 2 SW Antenna Cup 1 SW S350/S350T Series Option Air Filter Extension Adapter 1 SW S102 Shock Cap O-Ring (SP) 4 SW S350 New BBS System Shock Seal O-Ring 4 SW S350 New BBS System Shock Spring Adjust Nut O-Ring 4 SW Shock Boot (S) 2 SW Shock Boot (L) 2 SW Shock Spring Adjust Nut O-Ring 4 SW O-ring S5 4.8X1.5 6 SW Air Filter Outer Foam 1 SW

42 Parts No. List Part No. Part Name Q`ty in Use ltem No Air Filter Foam 1 SW Diff. Gasket (0.5T) 2 SW S35-3 Series Servo Saver Spring Dusty Protect Sponge 1 SW S35-3 Series Center Big Bore Plastic Diff. Case Gasket 1 SW A SWORKz Tornado Clutch Spring II (1.0) 3 SW A Servo Saver Spring 1 SW Rear Sway Ball SW Rear Sway Ball SW Front Sway Ball SW Pipe Spring 1 SW A Brake Spring 2 SW Throttle Rod 50 1 SW Throttle Rod Spring 1 SW Brake Rod 60 2 SW Body Clip 3 SW Front Sway Ball SW S350 BBS Option Shock SpringA-1(75X1.4X6.5) 2 SW S350 BBS Option Shock SpringB-1(90X1.4X7.5) 2 SW Ball Bearing 6x10x3 4 SW Ball Bearing 8x16x5 14 SW Ball Bearing M5x8x2.5 ZZ (4PC) 2 SW Ball Bearing 5x10x4 2 SW Ball Bearing 5x11x4 4 SW Flange Ball Bearing 3x6x2.5 6 SW E-clip 1 SW Washer 3.5X10X SW M2.6x6xT0.6 4 SW Spring Washer 4 SW M5x8xT0.4 4 SW M5x8xT0.8 1 SW SHIM 13x16x SW SHIM 6.0x10.0x0.2 2 SW M3x8xT0.8 3 SW M3 Nut Lock 16 SW Flage Nylon Nut M4 1 SW M2.5 Nut Lock 4 SW M3x3 Set Screw 13 SW M3x4 Set Screw 4 SW M5x4 Set Screw (Flat Bottom) 6 SW M3x8 Cap Screw 1 SW M3x12 Cap Screw 6 SW M3x23 Cap Screw 2 SW A M3x25 Cap Screw 4 SW A M3x8 Hex Soket OH/TP Screw 4 SW M3x10 Hex Soket OH/TP Screw 16 SW M3x16 Hex Soket OH/TP Screw 14 SW M3x15 Hex Soket OH/TP Screw 2 SW M3x20 Hex Soket OH/TP Screw 3 SW M3x12 Hex Soket OH/TP Screw(HT) 7 SW M3x12 Hex Soket OH/TP Screw 9 SW M3x25 Hex Soket OH/TP Screw 4 SW M3x6 Hex Soket OH/TP Screw 12 SW M2.5x8 1.5Hex Soket OH/ST Screw 8 SW M3x5 Hex Soket OH/TP Screw 3 SW M2.5x5 1.5Hex Soket OH/ST Screw 4 SW A S35 Series M4x10 Hex Soket OH/TP Set Screw 4 SW A M3x12 FH/ST HEX Screw 12 SW M3x10 FH/ST HEX Screw 24 SW M3x14 FH/ST HEX Screw 2 SW M3x8 FH/ST HEX Screw 22 SW M3x35 FH/ST HEX Screw 4 SW M4x10 FH/ST HEX Screw 2 SW M4x12 FH/ST HEX Screw 5 SW M4x16 FH/ST HEX Screw 8 SW M4x8 FH/ST HEX Screw 1 SW M3x16 FH/ST HEX Screw 2 SW M2.6x6 FH/ST HEX Screw 22 SW M2.0x4 FH/ST HEX Screw 4 SW A M3 Countersunk Washer(GM) 4 SW A A 3 Countersunk Washers (GM) 2 SW A A Flange M3 Nut Lock (GM) 5 SW A A M4x8 I-Head Screw 4 SW A SW A S350 Rear Hub Carrier Set (Also for LDS) (L&R) SW S350 Wing Stay Set with Bumper SW C S35/S350 Series Ball End Set with Shock Plastic Parts (2 Set) SW A S35-3 Settring Bellcrank Set with Servo Horn Set SW S350 Side Guard Set (L&R) SW S350 Center Diff. Mount Set (2 Set) SW A S350/S350T Series Option Air Filter Extension Set SW S350 BX1/BR1 Plastic Chassis Brace Set SW B S35-T/S350T Race-composite Front Lower Arm +3 Set SW B S35-T/S350T Race-composite Rear Lower Arm +3 Set SW B S35-T/S350T Race-composite Front Upper Arm +3 Set SW S350T Rear Chassis Brace SW S350T Body Mount with Fuel Tank Ring-pull SW S353 Series Plastic Inserts Set SW S35-3 Series Gear Box Set SW S35-3 Nitro Buggy Radio Tray Set SW A S35-3 Series Front Steering Knuckle Set (Type 2.0) SW Antenna Tube SW A S350 EVO Big Bore Diff Case SW Throttl Linkage Set SW S350T Fuel Tank Set (150cc) SW S350 Professional Matel Brake Calipers 2.0 Set SW S350 series BBS Shock Seal Kit SW S350T series BBS Pro Shock System Front Set (+5) SW S350T series BBS Pro Shock System Rear Set ( +5.6) SW S350T Series Universal Cross Drive Shaft Set SW S35-3 Series Pleastic Center Big Bore Diff Case SW BK SWORKz 1/8 Off Road Speed Wing (BK) SW A S35-T/ZEUS Speed Rhinocero III Body Shell (1.5) SW Diff. Bevel Gear Set SW Tornado Clutch Shoes SW A SWORKz Tornado Fly Wheel Set (GM) SW Bevel Gear Shaft SW A S35 Series Front/Rear Diff. Outdrive (2pc) SW Pin M2.2x9.9 SW Center Diff. Outdrive SW Center Diff. Plate SW A S350 Sseries Engine Mount Set (HC) SW Front/Rear Lower Arm HingPin SW Brake Cam Set SW Servo Saver Shaft SW A S350 Sseries Servo Saver Post (HC) SW A S350 Series Knuckle Pivot Ball Washer(GM) SW A S350 Series Knuckle Pivot Ball Nut(GM) SW Front Upper Arm HingPin SW A S350 Wheel Nut (HC) SW Rear Upper Sus. Arm Ball Stud SW Shock Ball Stud 6xL6.7 SW Sway Bar Ball Stud SW Clutch Bell 13T SW B S350 Series Aluminum Shock Cap Stud (-1.3)(2PC) SW A S350 SeriesPipe Holder(GM) SW Steering Servo Turnbuckle (M3x30) SW A S350 Series Adjuster Knob (Included Brake Adjuster Knob)(GM) SW A S35 Sries Aluminum Front Changeable Lower Arm Holder (BK) SW B S35-3 Series Aluminum Rear Chassis Brace Mount (GM) SW A S350 PSP System Aluminum Settring Bellcrank Upper (A 2H ) SW S350T Rear Upper Arm Turnbuckle M5x72 SW S350T Steering Linkage Turnbuckle M4x75 SW A S35-T Truggy Crown Gear 46T (Fit for SW /330501A) SW S350T 17 Wheel Hub (L11.5) SW S350 New BBS System Shock Piston 1.3X6 Holes(2pc) SW S350 New BBS System Shock Piston 1.4X6 Holes(2pc) SWC S350 Competition Series Professional Brake Disc SW S350 BBS System +5.6 Shock Body L SW S350 BBS System +5 Shock Body S SW S350 New BBS System +5.5 Shock Shaft ( L) SW S350 New BBS System +1.3 Shock Shaft ( S) SW S35 Series Adjust Front Lower Arm Plate SW S35-3 Seies BBS Emulsion Shock Cap SWC S350 BBD Special Brake Cam SW S35-T Pinion Gear 10T (Only Fit for SW A) SW A S35-T/S35 Series Competition Center Drive Join (5 set screw) SW A S35-T T7075 Aluminum Rear Shock Tower SW S35-T T7075 Lightened Main Chassis 42 Spare Part List Item No. Part Name

43 Spare Part List Item No. Part Name SW A S35-3 Series Steel F-Center Dive Shaft (88) SW S35-3 Series Rear Front Lower Suspension Plate SW S35-3 T-7075 Aluminum Rear Lower Fully Adjustable Toe-In Block (Type A) SW S35-3 Series T-7075 Aluminum Front Upper Arm Holder SW S35-3 Series T-7075 Aluminum Steering Plate SW S35-3 Series Servo Saver Big Nut SW S35-3 Series Aluminum Steering Linkage 7 Ball Stud(4pc) SW S35-3 Series Rear Hub Carriers Hinge Pin with Nut SW S35-3 Series Center Spur Gear for Big Bore Diff Case (48T) SW S35-T T7075 Aluminum Front Shock Tower SW S35-T Steel Center Rear Drive Shaft 165 SW S35-3 Series T-7075 Aluminum Steering Knuckle Plate (F-Type) (R&L) (1PC) SW S35-3 Pro-composite Carbon Steering Bellcrank Plate (Suit for Nitro Buggy) SW S102 Shock Cap O-Ring (SP) SW Shock Boot (S) SW Shock Boot (L) SW O-ring S5 4.8X1.5 SW Diff. Gasket (0.5T)(6pc) SW Air Filter Foam Set SW S35-3 Series Servo Saver Spring Dusty Protect Sponge (2pc) SW S35-3 Series Center Big Bore Plastic Diff. Case Gasket (3pc) SW A SWORKz Tornado Clutch Spring II (1.0) SW Rear Sway Ball 2.8 SW Rear Sway Ball 2.6 SW Front Sway Ball 2.3 SW Body Clip SW Front Sway Ball 2.2 SWC S350 Competition Shock Spring A-1 (75X1.4X6.75)(Yellow) SWC S350 Competition Shock SpringB-1 (90X1.4X8.25)(Red) SW Ball Bearing 6x10x3 SW Ball Bearing 8x16x5 SW Ball Bearing M5x8x2.5 ZZ (4PC) SW Ball Bearing 5x10x4 SW Ball Bearing 5x11x4 SW Flange Ball Bearing 3x6x2.5 SW Washer 3.5X10X0.2 SW M2.6x6xT0.6 SW Spring Washer SW M5x8xT0.4 SW M5x8xT0.8 SW SHIM 13x16x0.2 SW SHIM 6.0x10.0x0.2 SW M3x8xT0.8 SW M3 Nut Lock SW Flage Nylon Nut M4 SW M2.5 Nut Lock SW M3x3 Set Screw SW M3x4 Set Screw SW M5x4 Set Screw (Flat Bottom) SW M3x8 Cap Screw SW M3x12 Cap Screw SW M3x23 Cap Screw SW A M3x25 Cap Screw SW M3x8 Hex Soket OH/TP Screw SW M3x10 Hex Soket OH/TP Screw SW M3x16 Hex Soket OH/TP Screw SW M3x15 Hex Soket OH/TP Screw SW M3x20 Hex Soket OH/TP Screw SW M3x12 Hex Soket OH/TP Screw(HT) SW M3x12 Hex Soket OH/TP Screw SW M3x25 Hex Soket OH/TP Screw SW M3x6 Hex Soket OH/TP Screw SW M2.5x8 1.5Hex Soket OH/ST Screw SW M3x5 Hex Soket OH/TP Screw SW M2.5x5 1.5Hex Soket OH/ST Screw SW A S35 Series M4x10 Hex Soket OH/TP Set Screw SW M3x12 FH/ST HEX Screw SW M3x10 FH/ST HEX Screw SW M3x14 FH/ST HEX Screw SW M3x8 FH/ST HEX Screw SW M3x35 FH/ST HEX Screw SW M4x10 FH/ST HEX Screw SW M4x12 FH/ST HEX Screw SW M4x16 FH/ST HEX Screw SW M4x8 FH/ST HEX Screw 43 Item No. Part Name SW M3x16 FH/ST HEX Screw SW M2.6x6 FH/ST HEX Screw SW M2.0x4 FH/ST HEX Screw SW A M3 Countersunk Washer(GM) SW A 3 Countersunk Washers (GM) SW A Flange M3 Nut Lock (GM) SW A M4x8 I-Head Screw Option Part List Item No. Part Name SW Rear Sway Bar 3.0 SW Front Sway Bar 2.8 SW A High Performance Rubber Cover Ball Bearing 8x16x5 (10pc) SW Ball Bearing M5x8x2.5 ZZ (4PC) SW B High Performance Ball Bearing 5x10x4(coffee)(4pc) SW Front Sway Bar Set SW Rear Sway Bar Set(2.6/2.8/3.0) SW FY SWORKz 1/8 Off Road Speed Wing (FY) SW WH SWORKz 1/8 Off Road Speed Wing (WH) SW S35-3/S350 Nitro Series Center Brake Disk Holder SW Ail Filter Set SW FO S353 Series Colorful Plastic Inserts Set (FO) SW FY S353 Series Colorful Plastic Inserts Set (FY) SW LB S353 Series Colorful Plastic Inserts Set (SB) SW A Tornado Clutch Shoes (2set) SW Steering Knuckle Pivot Ball Turnbuckle SW Knuckle Pivot Ball SW A S350 Series Aluminum Rear Upper Sus. Arm Ball Stud(4pc) SW A S350 Series Aluminum Shock Ball Stud(4pc) SW A S350 Series Aluminum Sway Bar Ball Stud(4pc) SW A Aluminum Rear Chassis Brace SW Aluminum Front Chassis Brace SW A S35-3 Series Rear Chassis Blance wight 15g(2pc) SW S-WORKz Turbo Tornado Fly Wheel Set SW SWORKz 3x18 Shock Hex Screw Set (Anti-Clockwise) SW A SWORKz S350 Series Pro Wheel Nut (GM) SW S350 Series Knuckle Pivot Ball Balance Nut (5.5g) (2pc) SW S350 Series Aluminum Wing Holder (RED) SW B S350 Series Aluminum Wing Holder (BK) SW G S350 Series Aluminum Wing Holder (GM) SW S350 Series Rear Sway Bar 2.7 SW S350 Series Front Sway Bar 2.0 SW S350 New BBS System Shock Piston 1.5X6 Holes(2pc) SW S350 BBS System Shock Piston 1.3X8 Oblique Holes (2pc) SW S350 BBS System Shock Piston 1.2X8 Oblique Holes (2pc) SW S350 Buggy Series Aluminum Center Diff. Mount SW S35-3 Series T-7075 Aluminum F-Center Dive Shaft (88) SW S35-3 Series Center Spur Gear for Plastic Big Bore Diff Case (47T) SW SWORKz Pro-Design Aluminum Steering Servo Horn 25T SW SWORKz Pro-Design Aluminum Steering Servo Horn 23T SW S35-3 T-7075 Aluminum Rear Lower Fully Adjustable Toe-In Block (Type B) SW S35-3 Pro-composite Carbon Steering Knuckle Plate SW S350 Series BBS System Shock Piston 1.2X8 Straight Holes SW S350 Series BBS System Shock Piston 1.3X8 Straight Holes SW S35 Series Front Arm Holder Balance Weight Set (25g/35g) SW S350 New BBS System Shock Bladder (Medium)(4pc) SW Air Filter Adapter SWC S350 series BBD Competition Large Center Diff. system SWC SWORKz Tornado Hi-Performance Lightened Clutch Bell (13T) SWC A S350 Series Competition Titanium Steering Knuckle Pivot Ball Turnbuckle SWC S350 Competition Shock Spring A-2 (75X1.4X7.25)(Red) SWC S350 Competition Shock Spring B-2 (90X1.4X8.5)(Pink) SWC S350 Competition Shock Spring C-1 (75X1.5X7.75)(SkyBlue) SWC S350 Competition Shock Spring E-3 (90X1.5X8.5)(Blue) SWC C SWORKz Competition 8x16x5 Ball Bearing (Metal Case)(6PC) SWC C SWORKz Competition 5x10x4 Ball Bearing( Metal Case)(6PC) SWC B SWORKz Competition 5x11x4 Ball Bearing (Metal Case)(4PC) SWC A SWORKz Competition 6x12x4 Ball Bearing (Metal Case)(8PC)

44 Production No