ABC HOBBY ORIGINAL RADIO CONTROL CAR
|
|
- Shauna Preston
- 6 years ago
- Views:
Transcription
1 ABC HOBBY ORIGINAL RADIO CONTROL CAR Instruction Manual Study the instructions thoroughly before assembly. FRONT WHEEL DRIVE NEW STYLE STRUT SUSPENSION BATHTUB CHASSIS 4 BEVEL GEAR DIFFERENTIAL FULL ADJUSTABLE SUSPENSION UNIVERSAL JOINT WHEEL BASE:210mm BODY WIDTH:157mm-163mm
2 18T Bevel Gear 10T Bevel Gear 1 GEAR BOX Diff Outer Joint 2 x 8 mm Tapping Diff Cover 2 x 8 mm Tapping Diff Cover Diff Rubber Pad Bevel Cross Pin 5 x 0.3 mm Spacer 3.5 x 0.2 mm spacer Diff Rubber Pad 48T Diff Gear M4 O Ring Tighten the screw equally 3.5 x 0.2 mm spacer 5 x 0.3 mm Spacer M4 O-ring Bevel Cross Pin 850 Bearing 10T Bevel Gear 18T Bevel Gear M4 O Ring Make sure that the gears are in the right drive orientation. 1.6 x 0.8 mm Pin Counter Gear Shaft 3 x 4 mm 850 Bearing 20T Counter Gear 3 x 4 mm Diff Gear Box A Counter Gear Shaft Counter Gear Shaft 1.6 x 0.8 mm Pin Diff Gear Box A 48T Diff Gear 1510 Bearing 1510 Bearing 20T Counter Gear (48 Pitch) 25T Counter Gear (48 Pitch) Diff Gear Box B 2 MOTOR MOUNT Spur Gear Shaft 1.6 x 0.8 mm Pin Motor Plate Holder Spur Gear Shaft 850 Bearing Upper Mount Holder AL Motor Plate A AL Motor Plate A Flat Head Flat Head 850 Bearing 3 x 4 mm 50T/25T Spur Gear 850 Bearing 1.6 x 0.8 mm Pin Upper Mount Holder AL Motor Plate B Upper Mount Holder Upper Mount Holder 25T Counter Gear Holder Holder 2
3 Support 3 STEERING UNIT S m o o t h!! 50T/25T Spur Gear Crank A Support Crank B 4.8 mm Ball Stud 3 x 6 mm Plastic Spacer Crank B Crank A Gear Ratio 48 Pitch 4 mm King Pin S m o o t h!! components should be free of bind. Calculation of Gear ratio Kit Standard S m o o t h!! 25T Counter Gear 20T Counter Gear 50T/25T Spur Gear 48T Diff Gear 4 HUB CARRIER Wheel Hub 22T Pinion Gear 50T/25T Spur Gear REAR Wheel Hub Unit must move smoothly 3 x 6 mm Plastic Spacer 4 mm King Pin 3 x 12 mm 3 x 6 mm Plastic Spacer 4 mm King Pin 3 x 5 x 0.5 t Washer Ball FRONT Axle Insert a kingpin along the angle of Knuckle Hole Ball Stopper Axle Ball Stopper 3 x 5 x 0.5 t Washer Wheel Hub Ball Stud 4.8 mm Ball 3 x 8 mm 2 mm Hex Wrench Wheel Hub Universal Joint Ball must move smoothly 3 x 5 x 0.5 t Washer Universal Joint must move smoothly 3
4 Plastic Washer Sus Arm Pin Flat Head 5 SUSPENSION ARM Sus Arm Holder A Sus Arm Holder B Sus Arm Holder A Sus Arm Holder B Right Left Assemble the right and left arms carefully, remembering the right and left orientation. 1 mm Plastic Washer FRONT SECTION Sus Arm Pin Right Left Sus Arm Holder B Sus Arm Holder A 1 mm Plastic Washer Sus Arm Holder A Sus Arm Holder B Flat Head 1 mm Plastic Washer REAR SECTION Sus Arm Pin Sus Arm Holder B Flat Head Sus Arm Holder A 1 mm Plastic Washer 6 UPPER DECK 3 x 12 mm Back Side 3 x 12 mm Bulk Support Flat Head 3 x 12 mm Flat Head Upper Deck Bulk Unit Ball Stud 4.8 mm Bulk Support Bumper Bulk Flat Head Bulk Unit 3 x 12 mm Flat Head Flat Head 4
5 7 UPPER MOUNT 3 x 12 mm Upper Mount Upper Mount 2.6 mm x 8 mm Flat Head King Pin Ball King Pin Ball 4.8 mm Aluminum Ball Upper Mount 2.6 mm x 8 mm Flat Head Rod 3 x 6 mm Plastic Spacer S m o o t h!! Crank C 4.8 mm Aluminum Ball 3 x 12 mm Dumper Sleeve 1/2 Scale 8 FRICTION DUMPER Dumper Remover 3 mm Silicon O-ring Friction Dumper Piston Attach an O-ring to Ball Stud. Piston Friction Dumper Piston Friction Dumper Sleeve 3 mm Silicon O-ring After having attached Ball Stud, attach a damper piston to the upper mount from bottom. Because the materials of the upper mount are stiff, you can put it on easily when you use 7.0mmBox Driver. No Fine Fix Wrench 7.0mm Box Driver (Not included in this kit) 7.0mm Box Driver 7.0mm Box Driver Friction Dumper Piston 2.6 mm x 10 mm Capped Friction Dumper Piston Friction Dumper Sleeve Apply damper grease to a piston. 5
6 9 BODY MOUNT Body Mount B Body Mount C Body Mount A Body Mount B Body Mount C When you use TAMIYA body, use Body Mount B in the, in combination with extension plate and Body Mount A in the rear. Body Mount B Body Mount A Extension Plate 10 HUB CARRIER INSTALLATION 2.5mm Hex Wrench After chassis completion, adjust it again. 2.5mm Hex Wrench 6
7 11 UPPER MOUNT INSTALLATION Sandwich all springs between knuckle and kingpin balls. Battery Cover Tie Rod Insert the dumper piston with grease applied on each dumper sleeve. Cable Cramp Tie Rod Battery Cover Tie Rod 12 RADIO SYSTEM All electronics stuffs are not included in this kit. Battery Antenna Wire Switch Saver Spring (Silver) Saver Spring (Gold) Saver Cap Servo Horn Choose the Saver Serration much with your servo. Saver Serration Saver Serration Servo Horn Saver Spring (Gold) X 2 Transmitter Receiver Connector Connect to Motor 2 Use the screw from your servo. Servo Speed Controller 3 mm Nut Saver Spring (Silver) Reverse Switch The position of the reverse switch varies according to a transmitter Degrees 3 mm Nut Set the reverse switch of the transmitter so that servo Horn moves in the direction of the arrow when you operated a steering to the right. 7 **When the power is ON, the servo horn should be in the neutral position as shown in the picture.
8 3 x 6 mm 13 MOTOR INSTALLATION 3 x 6 mm 3 x 6 mm Washer / Silver 22T Pinion Gear (48 Pitch) 3 x 3 Set Remove Spur Gear and bearings. 540 Size Motor Copy Paper 3 x 3 Set 3 x 6 mm 22T Pinion Gear (48 Pitch) Attach a motor with 3X6mm. Attach a counter gear, after put on a pinion gear. After then, attach gear cover with body clip. To get a perfect gear mesh, place a piece of paper between the gears and tighten the motor mount screws. Adjust motor position for smooth gear mesh. 14 STEERING LINKAGE 3 x 7 mm Washer / Black 3 x 7 mm Washer / Black Servo Holder Rod End Servo Holder Servo Holder L Crank 䎜䎓䏲 䎜䎓䏲 q 8 **When the power is ON, the servo horn should be in the neutral position as shown in the picture.
9 4 mm Wheel Nut 15 ELECTRONICS INSTALLATION Speed Controller Receiver Double Sided Tape Double Sided Tape Foam Insert Tire Body Mount A Foam Insert Body Clip Wheel Cable Cramp CA Cement Body Mount A Body Mount B Body Mount C Foam Bumper **Wipe an adhesion side with alcohol etc. 16 BODY INSTALLATION Knife Edge Reamer #69006 (Not included in this kit) Body Clip Body Clip Complete! Cut Cut 4 mm Wheel Nut 9
10 17 BASIC SETTING Toe Toe Out 1 Toe In : Movement at the steering operation becomes calm. Toe Out : Movement at the steering operation becomes quick. Forward Forward Camber Adjust the length of the steering ball of the lower knuckle, then Change a camber. Toe Out Toe In Toe Toe In 1 Toe In : Increase >> Stability improves. Decrease >> slide becomes early. Toe Out : You must not make the rear toe-out. Ride Height Attache washer for change ride-height Ride Height / Droop Ride Height : A horizontal state is a neutral characteristic. Nose Down >> Movement at the steering operation becomes quick. Tail Down >> slide becomes early. Droop : Adjust a traction in the roll. Decrease Droop >> Movement at the steering operation becomes quick. Decrease Droop >> slide becomes early. Droop Turn the 3x8mm screw, them change droop. Droop 2mm Ride Height 5mm Droop 3mm Ride Height 5mm Camber Camber : Adjust a traction in the roll. Increase Negative Camber >> Traction feeling improves. (The excessive negative loses traction, and a tire is worn.) Positive Camber >> Don`t make this setting by On-road car. Positive Camber 0 Negative Camber Negative Camber 0 Positive Camber Positive Camber 0 Negative Camber Negative Camber 0 Positive Camber 0 0 Negative 1 Negative 1 10
11 1 set 1 set P4 O-ring x 2 2x8mm Tapping x 4 Universal Joint Diff Outer Joint Diff gear Rubber Pad Bevel Gear Set Bevel Cross Pin P3 O-ring (Silicone) 3.5x0.2mm Spacer 3.5x0.2mm Spacer 2.0x9mm Pin 1.6x8mm Pin 4mm King Pin Axle Shaft Ball 4.8mm Ball Stud Suspension Armin Rod A/B set Spur Gear A/B set Counter Gear 48 Pitch Diff Gear Counter Gear Spur Gear Shaft Counter Gear Shaft AL Motor Plate 22T Pinion Gear 48T Diff Gear 50T/25T Spur Gear Gear Box Gear Cover 1 set 4.8mm Aluminum Ball Servo Saver Rod End Tie-Rod Upper Deck Upper Mount Upper Mount Bumper Battery Cover A/B set 1 set Bulk 1 set Bulk Support Knuckle Set L/R King pin Ball Sus Arm Holder Set Cable Cramp Suspension Sim Set Extension Plate Bulk Set Support 1 set Wheel Hub Crank C 3x6 Plastic Spacer Grid Main Chassis Friction Dumper Crank Set Grid Sus Arm Set Crank B Crank A Upper Mount Holder 1 set 1 set Unit Holder Motor Plate Holder Motor Mount Plastic Pats set Body Mount Set SB Racing Tires 8S Type Wheels Foam Bumper 1.0mmx5T Spring 3x4mm x 2 3x6mm x 2 3x8mm x 57 3x12mm x 4 3x8mm Flat Head x 17 3x12mm Flat Head x 2 2.6x10mm Capped x 4 1 set Antenna Pipe Set Wheel Nuts Body Clip Double Sided Tape Silicone Oil #5000 Dumping Grease 2.6x10mm Flat Head Phillip x 4 3x5mm 0.5t Washer x 6 3x7mm Washer x 4 3mm Nut x 1 Grid Hard Ware Set 1510 Bearing 850 Bearing 11
12 0.7mmx5T Spring 0.8mmx5T Spring 0.9mmx5T Spring 1.1mmx5T Spring AL Servo Horn AL Rod 50/30T Spur Gear Set Crank Holder (for CFRP Chassis) Rod End 3x10mm Set Set AL 4.8mm Ball Stud Titanium 3x25mm Turnbuckles AL Oil Filled Dumper King Pin Ball Holder (for CFRP Chassis) Antenna Holder (for CFRP Chassis) Battery Holder (for CFRP Chassis) Dumping Grease M Dumping Grease S 630 Bearing AL Hub 5mm AL Hub 6mm AL Hub 7mm (10g x 2) Extra Weights Heavy Duty Servo Saver Reinforced / Black Reinforced / White S-Mesh / White S-Mesh / Black BRE / White BRE / Black HS / White HS / Black **You will need #25762 and # Carbon FRP Upper Mount **You will need # **You will need # Grid Carbon FRP Main Chassis **You will need # Carbon FRP Upper Mount Carbon FRP Upper Deck 3x4mm x 2 1 set 3x6mm x 6 3x8mm x 56 3x12mm x 4 3x8mm Flat Head x 17 Grid Titanium Set 3x12mm Flat Head x 2 N Racing Tires 12
DIFFERENTIAL STEERING RACK
BAG-A DIFFERENTIAL (2 Sets) +Driver Cap Screw Diff Ball Nylon Nut Thrust Washer Thrust Ball Diff Joint Cup A Allen Wrench 850 Bearing Diff Ring Diff Spring Nylon Nut 850 Bearing Diff Ring Diff Ball Ball
More informationNew Generation Rear Wheel Drive
New Generation Rear Wheel Drive ABC HOBBY ORIGINAL RADIO CONTROL CAR Instruction Manual Study the instructions thoroughly before assembly. REAR 2 WHEEL DRIVE REAR MOUNTED MOTOR BELT DRIVE DOUBLE DECK CHASSIS
More informationcarbon fiber before assembly. Sand glue to the edges and
chassis and carbon fiber give you a before assembly. Sand glue to the edges and 5 BAG MARKED CA BAG MARKED M3x6 Flathead 4 03 4 05 BAG MARKED 2 10 13 Installing Steering System Shock Assembly M4x28
More informationContents. Symbols Used. Equipment Required L=R. Page. Apply Thread Lock. Apply. Silicone Oil. 30mm Fan
Contents Content Page Content Page Content Page 0. Tool and Accessories 1.Filing the Edges of the Chassis 2.Bulkhead Installation 3.Spur Gear Assembly 4.Front Spool Assembly 5.Gear Differential Assembly
More informationTP02C. 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy. Dimensions. Length 410mm Width 250mm Height 150mm
TP02C 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy Dimensions Length 410mm Width 250mm Height 150mm Transmitter Preparation Power Switch Antenna 27MHzTransmitter Crystal T 27MHz ON Extend
More information=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG mm. When track High Traction or want to reduce steering
NOTE : =Apply Thread lock adhesive R80059 One Way Cup () R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 CA GE =Apply CA Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic
More information- 3 -
- 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - 1/8th Scale Electric 4WD GT Car MGT7 ECO Parts List E2103 FRONT
More information- 3 -
- 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - 1/8th Scale Electric 4WD GT Car MGT7 ECO Parts List E2103 FRONT
More informationBEFORE YOU START CUSTOMER SUPPORT
BEFORE YOU START The X10 is a high-quality, 1/10-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision
More informationE Thank you for purchasing VBC Racing product. COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT INSTRUCTIONS MANUAL
COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION FORMULA CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we
More informationBEFORE YOU START. XRAY Europe K Výstavisku 6992, Trenčín Slovakia EUROPE. XRAY USA RC America, 2030 Century Center Blvd #15 Irving, TX USA
BEFORE YOU START The X12 is a high-quality, 1/12-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision
More informationASSEMBLY OF THE FRONT AND REAR BALL DIFF. Builds two differentials for front and rear
1 ASSEMBLY OF THE FRONT AND REAR BALL DIFF. 37145 40060 40060 2.6mm Nylon Nut 37110 35958 37132 2.6x6x1mm Washer 37148 Apply Grease 37120 (12 Pcs) Builds two differentials for front and rear. 38288 35958
More information7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675" pr GT RACING FRONT
RC10GT & RTR GT MC 9 McCOY GLOW PLUG 1 3.9 2661 CLUTCH NUT CLIPS 6.7 3216 WASHER, #4 12 1.00 3719 NYLON WIRE TIES, 6" heavy duty 12 2.00 3720 NYLON TIES, 8", light duty for receiver 12 2.00 3721 SELF-TAPPING
More informationBEFORE YOU START. XRAY USA RCAmerica, 167 Turtle Creek Boulevard Suite C Dallas, Texas 75207, USA
BEFORE YOU START The X12 is a high-quality, 1/12-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision
More informationShown with optional GFR-1017R Body Posts. J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN
Shown with optional GFR-1017R Body Posts J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034 www.hyperdriveracing.com 1 You now own a state of the art 1/10 scale oval race car. The
More informationPREBUIL UILT ASSEMBLY AND OPERATION MANUAL
PREBUIL UILT Length: 15.2" [385mm] Width: 13" [330mm] Height: 5.8" [147mm] Weight: 3.3 lb [1500g] Wheelbase: 11.6" [295mm] Technical Support Information For technical assistance, contact: DuraTrax Product
More informationINSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT
COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we should
More informationINFINITY 1/8 ONROAD KIT SPARE & OPTIONAL PARTS FRONT BODY MOUNT PLATE FRONT SUSPENSION ARM REAR UPPER ARM HOLDER SET SERVO SAVER SET FRONT UPRIGHT
Tabella 1 Code CM-00001 Code R0001 R0002 R0003 R0004 R0005 R0006 R0007 R0008 R0009 R0010 R0011 R0012 R0013 R0014 R0015 R0016 R0017 R0018 R0019 R0020 R0021 R0022 R0023 R0024 R0025 R0026 R0027 R0028 R0029
More informationJ & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034
J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034 www.hyperdriveracing.com 1 You now own a state of the art 1/10 scale oval race car. The Hyperdrive Assault has gone through months
More informationRustler 4X4 (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler 4X4 (Model 67064-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
More informationINSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT
COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we should
More informationBigfoot (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Bigfoot (Model 36084-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
More informationR R11 Eccentric Hub-Alu (4) R R11 Eccentric Hub-Alu (4) NOTICE. Pulley cover direction NOTICE BAG 01 NOTICE BAG 01
BAG BAG R Spool Axle Alu RA Front Spool Pulley Set 8T (4pcs) R Diff Gears (with Axle) Trim any excess flashing from the diff gear axle at the mold injection point. (pcs) (4pcs) R Spool Outdrive (pcs) R6
More informationEn Instruction Manual De Bauanleitung. Fr Manuel de montage
En Instruction Manual De Bauanleitung Fr Manuel de montage RTR Trophy Truggy Flux En De Fr Jp Vol.1 101875 Chassis Maintenance Chassis Wartung Entretien du châssis シャーシのメンテナンス 1 Gear Differential 101087
More information1/10 Scale 4WD 200mm Gas Power Touring Car
1/10 Scale 4WD 200 Gas Power Touring Car STS PRO 10 Instruction Manual DIMENSIONS Length: 390 Width: 200 Height: 120 Weight (ready to run): About 1800g DRIVETRAIN Type: 3-belt 4WD Transmission: 2-speed
More informationSOARSEIKI.Co.,Ltd
SOARSEIKI.Co.,Ltd info@soarseiki.com 1 2 3 4 BAGS A1 FRONT AND REAR DIFF 5 BAGS A2 CENTER DIFF 5 BAGS B1 FRONT TRANSMISSION STEP B1-1 Apply a thiin layer of lubricant on the gear. GR160003 BE050110040
More information:: Additional Features Your new TC6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions):
8/10 2 :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC10TC6. Please take a moment to
More informationStampede (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Stampede (Model 36054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
More informationStampede (Model ) Parts List
Stampede (Model 36054-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings
More informationAssembly Manual. 1/10th Formula 1 Car
Assembly Manual 1/10th Formula 1 Car Center Pivot Bag 1 3374 - Center Pivot Socket 40194 - Hard Anodized Alum Pivot ball 3254-2-56 *Note - Sometimes it is helpful to slightly over-tighten the top clamp
More informationTelluride 4X4 (Model ) Parts List
Telluride 4X4 (Model 67044-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings
More informationPan Car Setup and Troubleshooting
Pan Car Setup and Troubleshooting Problems can come up in the midst of competition. Either the car is not handling properly on the track or there are problems with equipment. Troubleshooting problems should
More informationKSKT RACING PRODUCTS
KSKT RACING PRODUCTS ''KSK-B'' SPEC RACING CHASSIS ASSEMBLY INSTRUCTIONS 'The Leader in SK Racing' 1 CHASSIS KIT FEATURES Black Carbon Fiber Chassis Components 2.5 mm Thick Main Chassis Battery mounting
More informationRustler (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler (Model 37054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
More information=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01. R Front One Way Cup (2) R Front One Way
NOTE : =Apply Thread lock adhesive R80059 One Way Cup () R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 =Apply Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic Shims ()
More information=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01
NOTE : =Apply Thread lock adhesive R80059 One Way Cup R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 =Apply Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic Shims () R80005
More informationSlash VXL (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash VXL (Model 58076-3) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
More informationPLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING.
INSTRUCTION MANUAL PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING. REQUIRED FOR OPERATION THINGS NEEDED You will need to buy a few items
More informationRustler (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler (Model 37054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
More informationSUSPENSION PARTS LOSB2002 F/R Suspension Arms (pr)(lst2)... $10.00 LOSB2102 Steering Bell Cranks, Shafts, & Chassis Braces (LST/2)... $7.00 LOSB2104 Front Spindles & Carriers (LST2)... $7.00 LOSB2106 Rear
More informationSlash (Model 58024) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash (Model 58024) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
More informationRJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS
RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 SPORT 3.2 KIT. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ THE TEXT, LOOK AT THE PICTURES, AND THE EXPLODED VIEW
More informationChassis Assembly x12WST. 3018X XL-5 Electronic Speed Control x10CS x8WST x12RST x10CS.
3286 3x12WST Chassis Assembly 3229 2.5x10CS 3628 1926 3290 3x8WST 3018X XL-5 Electronic Speed Control 3628 3629 2587 3x10CS 1834 3290 3x8WST 2676 3x12RST 2587 3x10CS 3627X 1834 3626 3628 3629 3627X 1726
More information1/8 Scale Gas Powered Off-Road Buggy
1/8 Scale Gas Powered Off-oad Buggy The body shown is slightly different in the U.S. kits PUE COMPETITION... INSTUCTION MANUAL OFNA acing 22692 Granite Way, Ste. B Laguna Hills, Ca. 92653 (949) 586-2910
More informationX-Maxx (Model ) Parts List
X-Maxx (Model 77076-4) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings
More informationPARTS LIST FOR ITEM 43511
PARTS LIST FOR ITEM 43511 1/10 SCALE FACTORY ASSEMBLED GLOW-ENGINE R/C CAR 1825272 Body (Unpainted) 9334080 Chassis 51011 TGS A Parts (Upright) (-A6, 2 pcs.) 51003 TT-01 B Parts (Sus. Arm) (B1-B15, 2 pcs.)
More informationRJS2021 LTO SPORT OVAL RACER LESS ELECTRICS
RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 LTO SPORT KIT FOR OVAL RACING. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ THE TEXT, LOOK AT THE PICTURES, AND THE EXPLODED
More informationRS-LM Parts List 1. GEAR DIFFERENTIAL/SOLID FRONT AXLE. The car can use either 2 differentials, front and rear or Solid Axle in the front.
RS-LM Parts List 1. GEAR DIFFERENTIAL/SOLID FRONT AXLE The car can use either 2 differentials, front and rear or Solid Axle in the front. Other differentials may work with the car. I used 3racing differentials
More informationSlash: TQ 2.4GHz radio (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arrange
Slash: TQ 2.4GHz radio (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings
More informationBIND ST-TRIM TH-TRIM ST-D/R
4 4 4 4 BIND ST-TRIM TH-TRIM ST-D/R 1. Put the battery in the car. 2. Install the battery. 3. Turn on the transmitter. Connect firmly. 4. Turn on the electronic speed controller. ON OFF AX80084 UV Joint
More informationASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B Associated Electrics, Inc. RS-1
ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B4 TT RS-1 2003-2006 Associated Electrics, Inc. FINAL ADJUSTMENTS RADIO ADJUSTMENTS Use the following
More informationPLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING.
INSTRUCTION MANUAL PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING. REQUIRED FOR OPERATION THINGS NEEDED You will need to buy a few items
More informationMake these adjustments before racing
FINAL ADJUSTMENTS ADJUSTING CAMBER To set the camber we recommend using our supplied #1719 camber/rear toe-in gauge. When adjusting camber you need to have the car ready to run with no body. Make these
More informationMonster Jam Replica (Model 36044) Parts List
Monster Jam Replica (Model 36044) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings
More informationRustler (Model ) Parts List
Rustler (Model 37054-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings
More informationSlash (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash (Model 58034-2) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
More informationMR-4BCS Parts List (Updated 9/15/03)
4WD Offroad Kits MRBC-1S MR-4BCS Competition 4wd Buggy Kit $ 499.95 Chassis Parts ZS-001B Front Bumper 1 $ 3.75 ZS-002GB Graphite Main Chassis 1 $ 39.00 ZS-003UDS Upper Deck 1 $ 10.75 ZS-118 Battery Plate
More informationThe following items are needed to install your Speed Kit. Phillips head screw driver 3/16" nut driver 1.5mm hex wrench
BRUSHLESS SPEED KIT INSTALLATION INSTRUCTIONS REQUIRED TOOLS The following items are needed to install your Speed Kit. Phillips head screw driver 3/16" nut driver 1.5mm hex wrench 1. REMOVE STEERING LINKAGE
More informationPinion Gear and Setscrew
XRAY T1 Factory Kit 2005 The new XRAY T1 Factory Kit '05 (T1FK'05) is the 5th generation of XRAY's extremely successful T1 family of 1/10-scale on -road electric touring cars. The T1FK'05 is a large evolutionary
More informationSlash (Model 58024) Parts List
Slash (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings
More information1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES
1:8 SCALE CATALOG Stock is extremely limited. Parts listing as of 7/2001. Sale prices apply to orders direct from Associated only. Items available while supplies last. Items marked Not available or are
More informationMonster Jam Replica (Model 3602) Parts List
Monster Jam Replica (Model 3602) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings
More information#0980 Intimidator 7 Direct Drive Racing Kit
#0980 Intimidator 7 Direct Drive Racing Kit 1 Thank you for purchasing the Intimidator 7! Within this kit you will find a race winning car with over 30 years of Custom Works design and quality. The latest
More informationSlash 4X4 (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash 4X4 (Model 68054-4) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
More informationCaution. Electronic Speed Controller Instructions. Needle Nose Pliers Awl RCE3003 HD Grease. Fusion Tire Glue. RCE3004 Super Diff Lube
Caution Please read the following manual closely and familiarize yourself with its contents before operating the model. Keep the manual in a safe place for future reference for repairs, part numbers and
More informationGeneral Building Tips: A Good Dealer Is Extremely Important!! 1 Additional Items Needed For Operation. Tools Supplied
Owner s Manual Thank you for choosing the Team Magic E4JR. The E4JR includes a large selection of the important specialty parts when compared to the previous versions. Before you start building your new
More informationAssembly Manual. 1/10th World GT car
Assembly Manual 1/10th World GT car Center Pivot Bag 1 3374 - Center Pivot Socket 40194 - Hard Anodized Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the
More information1:8 SCALE NITRO POWERED TOURING CAR
1:8 SCALE NITRO POWERED TOURING CAR RTR INSTRUCTION MANUAL *SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. SAFETY PRECAUTIONS! This radio control models is not a toy! - First time builders should
More information.050 Allen key 1.5mm Allen key 1/16 Allen key 5/64 Allen key 3/32 Allen key Turnbuckle & 3/16 wrench
1 Thank you for purchasing the Outlaw 4 Sprint Car! The Outlaw sprint car platform has been developed for loose dirt buggy tire racing. In this kit you will find the 4 th evolution of the car which features
More informationReplacement Parts List Part Number Description Price
TM Replacement Parts List Part Number Description Price LOSA1022 Front Axles for XX-T Wheels (GTX, NXT, XXX-T)...$6.00 LOSA1113 Front Shock Tower (Desert Truck)...$5.99 LOSA1118 Front Suspension Arms (Desert
More informationRTR KITS - REQUIRED FOR OPERATION
Strong Front and Rear chassis braces. Tuned Polished Dual Chamber racing pipe. Unique adjustable chassis width of 310mm or 330mm. High performance.26 engine with Shaft Start Motor handle. Full race Offset
More informationINSTRUCTION MANUAL SUPPLEMENTARY SHEET
INSTRUCTION MANUAL SUPPLEMENTARY SHEET The T3R Raycer is based on the hugely-successful, race-winning T3 and as such the majority of spare parts and option parts are fully compatible between the two cars.
More informationOWNER'S MANUAL 2000 & ROAR National Champion
2000 & 2001 ROAR National Champion OWNER'S MANUAL Carefully read through all instructions to familiarize yourself with the parts, construction techniques, and tuning tips outlined in this manual. Being
More informationChassis Assembly 1926 1834 3290 3x8WST 3286 3x12WST 3018X XL-5 Electronic Speed Control 3290 3x8WST 2676 3x12RST 3229 2.5x10CS 2587 3x10CS 3629 3628 2587 3x10CS 3628 3628 3727A 3638 1726 3727A 3625 3629
More informationTIPS TO FINAL ASSEMBLY Radio installation. The Electronic speed control (ESC) and the receiver need to be mounted onto the chassis, using double sided
TIPS TO FINAL ASSEMBLY Radio installation. The Electronic speed control (ESC) and the receiver need to be mounted onto the chassis, using double sided tape (not supplied.) Mount the ESC first on the chassis
More informationPARTS CATALOG FOR UNO F1 RTR CAR
PARTS CATALOG FOR UNO F1 RTR CAR No.6716 1/10th Scale 2WD NITRO POWERED 2WD FORMULAR 1 CAR F1 UNO SPORT ARTR/RTR PARTS LIST PD1657 FR HEX DRIVE BUSHING PD0140 CLUTCH SHOES PD0270 CLUTCH BELL BAG / 4T
More informationXRAY KITS M18 M18T M18MT PARTS NT18 NT18T NT18MT PARTS. o = option part x = standard included / fits
PRO LiPo PRO USE THE DROP MENU TO FILTER THE SELECTION XRAY KITS o = option part x = standard included / fits 38 0000 XRAY - 4WD SHAFT DRIVE 1/18 MICRO CAR 38 0003 XRAY PRO LiPo - 4WD SHAFT DRIVE 1/18
More informationE-Revo (Model 5603) Parts List
E-Revo (Model 5603) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings
More informationalong with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet.
Use this XT2 Dirt Conversion Supplementary Sheet along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet. Parts included in Bag 8: 303141 SHIM 3x5x1.0MM (10) 322111 XT2 COMPOSITE
More informationINSTRUCTION MANUAL AX90053-I001
INSTRUCTION MANUAL AX90053-I001 2 3 AX80018 Hardware Parts Tree AX80006 Servo Set x3 AX31301 10mm Shock Caps Parts Tree (Blue) AX80069 AX31300 10mm Shock Parts Tree 2 (Blue) AX31114 WB8 Driveshaft AX80033
More informationPARTS CATALOG FOR SST STADIUM TRUCK RTR CAR
PARTS CATALOG FOR SST STADIUM TRUCK RTR CAR No.6714-F 1/10 4WD NITRO POWERED STADIUM TRUCK NITRO POWERED STADIUM TRUCK No.6714-F 1/10 4WD NITRO POWERED STADIUM TRUCK Features: 100% Factory assembled 2-Channel
More informationWARNING! Hard anodized, PTFE-coated shocks. Hard anodized, PTFE-coated MIP CVD's.
200 Thank you for purchasing this Team Associated product. This manual contains steps and instructions you will use to set up your gas truck. Please read this entire manual before attempting to start your
More informationASSOCIATED 1:10 SCALE GT MANUAL
ASSOCIATED 0 SCALE GT MANUAL INSTRUCTION MANUAL FOR THE RC10GT GAS TRUCKS #7060, 7061, 7067, 7068, & 7090 ASSOCIATED S RC10GT-- 3 TIMES NORRCA WORLD CUP CHAMPION! 200 Thank you for purchasing this Team
More informationSlash 4X4 (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash 4X4 (Model 68054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
More informationCOMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT SUPPLEMENTARY MANUAL FOR LIGHTNING KIT
COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT SUPPLEMENTARY MANUAL FOR LIGHTNING 10 235 KIT E Thank you for purchasing VBC Racing product. Things that we should remind you. This
More informationSlash 4X4 (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash 4X4 (Model 68086-3) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
More information1:8 SCALE GAS POWERED OFF-ROAD BUGGY
Instruction RTR Manual 1:8 SCALE GAS POWERED OFF-ROAD BUGGY PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING. REQUIRED FOR OPERATION THINGS
More informationTOWC Universal Drive Shaft Set...15,16 x2pcs. TOWC Engine Mount...98 x1pc. TOWC Dogbone (Rear)...19 x1pc
Replacement Parts Stock # Description Included DTXC5...5x0mm Bearing...x2pcs DTXC5...x6mm Bearing...x2pcs DTXC6...mm Bearing...x2pcs TOWC6032...Air Filter Set...02,03,0,05 xpc TOWC600...Rear Axle... xpc
More informationBag 1. Bag 1. Center Pivot. Center Pivot
8 00734 01901 5 Center Pivot Bag 1 3374 - Center Pivot Socket 4019 - Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the top clamp screws, then work the ball
More informationSlash (Model 5805) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Slash (Model 5805) Parts List Bearings & Bushings
More informationOWNER'S MANUAL Magnolia Ave., Chino, CA phone: (909) fax: (909)
OWNER'S MANUAL Carefully read through all instructions to familiarize yourself with the parts, construction techniques, and tuning tips outlined in this manual. Being able to grasp the overall design of
More informationItem Number Item Name MSRP MAP
Kits and RTRs 4021 RC12R6-FT KIT $439.99 $285.99 7063 ProSC 4x4 RTR $529.99 $334.99 7063C ProSC 4X4 RTR LiPo Combo $599.99 $379.99 8023 RC10F6 Factory Team Kit $499.99 $339.99 20150 SC28 RTR LUCAS OIL
More informationE-Revo (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. E-Revo (Model 56036-4) Parts List Bearings & Bushings 4609 Ball bearings (5x10x4mm)
More informationSlash 4X4 ( ) Parts List
Slash 4X4 (68086-3) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings
More informationReplacement Parts List Part Number Description Price
Replacement Parts List Part Number Description Price 48 Pitch Pinion Gear, 12T...$4.99 LOSA4006 Antenna Tube and Set Screw...$1.50 LOSA4015 Battery Foam...$2.50 LOSA5224 Silicone Shock Oil, 30 wt, 2 oz...$3.99
More informationRJS2002 FUNNY CAR KIT LESS ELECTRICS
RJS2002 FUNNY CAR KIT LESS ELECTRICS THANKS FOR BUYING RJ SPEED S FUNNY CAR DRAG KIT. IT IS MADE FOR STRAIGHT LINE DRAG RACING AND CAN BE BROKEN IF RUN INTO SOLID OBJECTS REPEATEDLY AT HIGH SPEED. IT REQUIRES
More informationE-Revo: TQi 2.4GHz Radio (Model 5603) Parts List
E-Revo: TQi 2.4GHz Radio (Model 5603) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars.
More informationMUST READ THIS BEFORE RUNNING
BLANK MUST READ THIS BEFORE RUNNING Running a nitro kit is fun and easy, but to make this a safe and good experience you must observe a few rules. This kit is extremely fast, easily over 40MPH, and can
More informationHI PerFORMANCE 1/8 OFF-ROAD NITRO BUGGY. Instruction manual OFNA 7 VANDERBILT, IRVINE, CA PH. (949)
HI PerFORMANCE 1/8 OFF-ROAD NITRO BUGGY. Instruction manual OFNA 7 VANDERBILT, IRVINE, CA 92618 PH. (949) 586-2910 THINGS NEEDED RTR KITS - REQUIRED FOR OPERATION You will need to buy a few items to start
More informationE-Revo (Model ) Parts List
E-Revo (Model 56036-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings
More information